ARM: IXP: Remove actux1 board
The board is unmaintained, just like the rest of the IXP. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Michael Schwingen <michael@schwingen.org> Cc: Tom Rini <trini@ti.com>
This commit is contained in:
Marek Vasut
parent
e97f9d817e
commit
373ee048a8
@ -1,8 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2000-2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := actux1.o
|
||||
@ -1,148 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2007
|
||||
* Michael Schwingen, michael@schwingen.org
|
||||
*
|
||||
* (C) Copyright 2006
|
||||
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
||||
*
|
||||
* (C) Copyright 2002
|
||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
||||
* Marius Groeger <mgroeger@sysgo.de>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <command.h>
|
||||
#include <malloc.h>
|
||||
#include <asm/arch/ixp425.h>
|
||||
#include <asm/io.h>
|
||||
#include <miiphy.h>
|
||||
#ifdef CONFIG_PCI
|
||||
#include <pci.h>
|
||||
#include <asm/arch/ixp425pci.h>
|
||||
#endif
|
||||
|
||||
#include "actux1_hw.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
/* CS5: Debug port */
|
||||
writel(0x9d520003, IXP425_EXP_CS5);
|
||||
/* CS6: HwRel */
|
||||
writel(0x81860001, IXP425_EXP_CS6);
|
||||
/* CS7: LEDs */
|
||||
writel(0x80900003, IXP425_EXP_CS7);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = 0x00000100;
|
||||
|
||||
GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_IORST);
|
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_IORST);
|
||||
|
||||
/* Setup GPIOs for PCI INTA */
|
||||
GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_PCI1_INTA);
|
||||
GPIO_INT_ACT_LOW_SET(CONFIG_SYS_GPIO_PCI1_INTA);
|
||||
|
||||
/* Setup GPIOs for 33MHz clock output */
|
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_PCI_CLK);
|
||||
GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_EXTBUS_CLK);
|
||||
writel(0x011001FF, IXP425_GPIO_GPCLKR);
|
||||
|
||||
udelay(533);
|
||||
GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_IORST);
|
||||
|
||||
ACTUX1_LED1(2);
|
||||
ACTUX1_LED2(2);
|
||||
ACTUX1_LED3(0);
|
||||
ACTUX1_LED4(0);
|
||||
ACTUX1_LED5(0);
|
||||
ACTUX1_LED6(0);
|
||||
ACTUX1_LED7(0);
|
||||
|
||||
ACTUX1_HS(ACTUX1_HS_DCD);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Check Board Identity
|
||||
*/
|
||||
int checkboard(void)
|
||||
{
|
||||
char buf[64];
|
||||
int i = getenv_f("serial#", buf, sizeof(buf));
|
||||
|
||||
puts("Board: AcTux-1 rev.");
|
||||
putc(ACTUX1_BOARDREL + 'A' - 1);
|
||||
|
||||
if (i > 0) {
|
||||
puts(", serial# ");
|
||||
puts(buf);
|
||||
}
|
||||
putc('\n');
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*************************************************************************
|
||||
* get_board_rev() - setup to pass kernel board revision information
|
||||
* 0 = reserved
|
||||
* 1 = Rev. A
|
||||
* 2 = Rev. B
|
||||
*************************************************************************/
|
||||
u32 get_board_rev(void)
|
||||
{
|
||||
return ACTUX1_BOARDREL;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size(CONFIG_SYS_SDRAM_BASE, 128<<20);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
struct pci_controller hose;
|
||||
|
||||
void pci_init_board(void)
|
||||
{
|
||||
pci_ixp_init(&hose);
|
||||
}
|
||||
#endif
|
||||
|
||||
void reset_phy(void)
|
||||
{
|
||||
u16 id1, id2;
|
||||
|
||||
/* initialize the PHY */
|
||||
miiphy_reset("NPE0", CONFIG_PHY_ADDR);
|
||||
|
||||
miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID1, &id1);
|
||||
miiphy_read("NPE0", CONFIG_PHY_ADDR, MII_PHYSID2, &id2);
|
||||
|
||||
id2 &= 0xFFF0; /* mask out revision bits */
|
||||
|
||||
if (id1 == 0x13 && id2 == 0x78e0) {
|
||||
/*
|
||||
* LXT971/LXT972 PHY: set LED outputs:
|
||||
* LED1(green) = Link/ACT,
|
||||
* LED2 (unused) = LINK,
|
||||
* LED3(red) = Coll
|
||||
*/
|
||||
miiphy_write("NPE0", CONFIG_PHY_ADDR, 20, 0xD432);
|
||||
} else if (id1 == 0x143 && id2 == 0xbc30) {
|
||||
/* BCM5241: default values are OK */
|
||||
} else
|
||||
printf("unknown ethernet PHY ID: %x %x\n", id1, id2);
|
||||
}
|
||||
@ -1,41 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2007
|
||||
* Michael Schwingen, michael@schwingen.org
|
||||
*
|
||||
* hardware register definitions for the AcTux-1 board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef _ACTUX1_HW_H
|
||||
#define _ACTUX1_HW_H
|
||||
|
||||
/* 0 = LED off,1 = green, 2 = red, 3 = orange */
|
||||
#define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0)
|
||||
#define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1)
|
||||
#define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2)
|
||||
#define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3)
|
||||
#define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4)
|
||||
#define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5)
|
||||
#define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6)
|
||||
#define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7)
|
||||
#define ACTUX1_HS_DCD 0x01
|
||||
#define ACTUX1_HS_DSR 0x02
|
||||
|
||||
#define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS
|
||||
#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F)
|
||||
|
||||
/* GPIO settings */
|
||||
#define CONFIG_SYS_GPIO_PCI1_INTA 2
|
||||
#define CONFIG_SYS_GPIO_PCI2_INTA 3
|
||||
#define CONFIG_SYS_GPIO_I2C_SDA 4
|
||||
#define CONFIG_SYS_GPIO_I2C_SCL 5
|
||||
#define CONFIG_SYS_GPIO_DBGJUMPER 9
|
||||
#define CONFIG_SYS_GPIO_BUTTON1 10
|
||||
#define CONFIG_SYS_GPIO_DBGSENSE 11
|
||||
#define CONFIG_SYS_GPIO_DTR 12
|
||||
#define CONFIG_SYS_GPIO_IORST 13 /* Out */
|
||||
#define CONFIG_SYS_GPIO_PCI_CLK 14 /* Out */
|
||||
#define CONFIG_SYS_GPIO_EXTBUS_CLK 15 /* Out */
|
||||
|
||||
#endif
|
||||
@ -1,99 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2000
|
||||
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm")
|
||||
OUTPUT_ARCH (arm)
|
||||
ENTRY (_start)
|
||||
SECTIONS
|
||||
{
|
||||
. = 0x00000000;
|
||||
|
||||
. = ALIGN (4);
|
||||
.text : {
|
||||
*(.__image_copy_start)
|
||||
arch/arm/cpu/ixp/start.o(.text*)
|
||||
net/built-in.o(.text*)
|
||||
board/actux1/built-in.o(.text*)
|
||||
arch/arm/cpu/ixp/built-in.o(.text*)
|
||||
drivers/input/built-in.o(.text*)
|
||||
|
||||
. = env_offset;
|
||||
common/env_embedded.o(.ppcenv)
|
||||
*(.text*)
|
||||
}
|
||||
|
||||
. = ALIGN(4);
|
||||
.rodata : {
|
||||
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
|
||||
}
|
||||
. = ALIGN(4);
|
||||
.data : {
|
||||
*(.data*)
|
||||
}
|
||||
. = ALIGN(4);
|
||||
.got : {
|
||||
*(.got)
|
||||
}
|
||||
. =.;
|
||||
|
||||
. = ALIGN(4);
|
||||
.u_boot_list : {
|
||||
KEEP(*(SORT(.u_boot_list*)));
|
||||
}
|
||||
|
||||
. = ALIGN (4);
|
||||
|
||||
.image_copy_end :
|
||||
{
|
||||
*(.__image_copy_end)
|
||||
}
|
||||
|
||||
.rel_dyn_start :
|
||||
{
|
||||
*(.__rel_dyn_start)
|
||||
}
|
||||
|
||||
.rel.dyn : {
|
||||
*(.rel*)
|
||||
}
|
||||
|
||||
.rel_dyn_end :
|
||||
{
|
||||
*(.__rel_dyn_end)
|
||||
}
|
||||
|
||||
_end = .;
|
||||
|
||||
/*
|
||||
* Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
|
||||
* __bss_base and __bss_limit are for linker only (overlay ordering)
|
||||
*/
|
||||
|
||||
.bss_start __rel_dyn_start (OVERLAY) : {
|
||||
KEEP(*(.__bss_start));
|
||||
__bss_base = .;
|
||||
}
|
||||
|
||||
.bss __bss_base (OVERLAY) : {
|
||||
*(.bss*)
|
||||
. = ALIGN(4);
|
||||
__bss_limit = .;
|
||||
}
|
||||
.bss_end __bss_limit (OVERLAY) : {
|
||||
KEEP(*(.__bss_end));
|
||||
}
|
||||
|
||||
.dynsym _end : { *(.dynsym) }
|
||||
.dynbss : { *(.dynbss) }
|
||||
.dynstr : { *(.dynstr*) }
|
||||
.dynamic : { *(.dynamic*) }
|
||||
.hash : { *(.hash*) }
|
||||
.plt : { *(.plt*) }
|
||||
.interp : { *(.interp*) }
|
||||
.gnu : { *(.gnu*) }
|
||||
.ARM.exidx : { *(.ARM.exidx*) }
|
||||
}
|
||||
@ -381,10 +381,6 @@ Active arm ixp - - -
|
||||
Active arm ixp - - - actux3 - Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - - actux4 - Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - - dvlhost - Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - actux1 actux1_4_16 actux1:FLASH2X2 Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - actux1 actux1_4_32 actux1:FLASH2X2,RAM_32MB Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - actux1 actux1_8_16 actux1:FLASH1X8 Michael Schwingen <michael@schwingen.org>
|
||||
Active arm ixp - - actux1 actux1_8_32 actux1:FLASH1X8,RAM_32MB Michael Schwingen <michael@schwingen.org>
|
||||
Active arm pxa - - - balloon3 - Marek Vasut <marek.vasut@gmail.com>
|
||||
Active arm pxa - - - h2200 - Lukasz Dalek <luk0104@gmail.com>
|
||||
Active arm pxa - - - palmld - Marek Vasut <marek.vasut@gmail.com>
|
||||
|
||||
@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
|
||||
|
||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||
=================================================================================================
|
||||
actux1 arm ixp - 2014-01-28 Michael Schwingen <michael@schwingen.org>
|
||||
mx1ads arm arm920t - 2014-01-13
|
||||
mini2440 arm arm920t - 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr>
|
||||
omap730p2 arm arm926ejs 79c5c08d 2013-11-11
|
||||
|
||||
@ -1,226 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2007
|
||||
* Michael Schwingen, michael@schwingen.org
|
||||
*
|
||||
* Configuration settings for the AcTux-1 board.
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#define CONFIG_IXP425 1
|
||||
#define CONFIG_ACTUX1 1
|
||||
|
||||
#define CONFIG_MACH_TYPE 1479
|
||||
|
||||
#define CONFIG_DISPLAY_CPUINFO 1
|
||||
#define CONFIG_DISPLAY_BOARDINFO 1
|
||||
|
||||
#define CONFIG_IXP_SERIAL
|
||||
#define CONFIG_SYS_IXP425_CONSOLE IXP425_UART2
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||||
#define CONFIG_BOARD_EARLY_INIT_F 1
|
||||
#define CONFIG_SYS_LDSCRIPT "board/actux1/u-boot.lds"
|
||||
|
||||
/***************************************************************
|
||||
* U-boot generic defines start here.
|
||||
***************************************************************/
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
||||
|
||||
/* allow to overwrite serial and ethaddr */
|
||||
#define CONFIG_ENV_OVERWRITE
|
||||
|
||||
/* Command line configuration. */
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_ELF
|
||||
#ifdef CONFIG_PCI
|
||||
#define CONFIG_CMD_PCI
|
||||
#define CONFIG_PCI_PNP
|
||||
#define CONFIG_IXP_PCI
|
||||
#define CONFIG_PCI_SCAN_SHOW
|
||||
#define CONFIG_CMD_PCI_ENUM
|
||||
#endif
|
||||
|
||||
#define CONFIG_BOOTCOMMAND "run boot_flash"
|
||||
/* enable passing of ATAGs */
|
||||
#define CONFIG_CMDLINE_TAG 1
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
#define CONFIG_INITRD_TAG 1
|
||||
#define CONFIG_REVISION_TAG 1
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
# define CONFIG_KGDB_BAUDRATE 230400
|
||||
#endif
|
||||
|
||||
/* Miscellaneous configurable options */
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
/* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
/* max number of command args */
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
/* Boot Argument Buffer Size */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x00400000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x00800000
|
||||
|
||||
/* timer clock - 2* OSC_IN system clock */
|
||||
#define CONFIG_IXP425_TIMER_CLK 66666666
|
||||
|
||||
/* default load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x00010000
|
||||
|
||||
/* valid baudrates */
|
||||
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
|
||||
115200, 230400 }
|
||||
#define CONFIG_SERIAL_RTS_ACTIVE 1
|
||||
|
||||
/* Expansion bus settings */
|
||||
#define CONFIG_SYS_EXP_CS0 0xbd113842
|
||||
|
||||
/* SDRAM settings */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define PHYS_SDRAM_1 0x00000000
|
||||
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
||||
|
||||
#ifdef CONFIG_RAM_32MB
|
||||
# define CONFIG_SYS_SDR_CONFIG 0x18
|
||||
# define PHYS_SDRAM_1_SIZE 0x02000000
|
||||
# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
|
||||
# define CONFIG_SYS_SDR_MODE_CONFIG 0x1
|
||||
# define CONFIG_SYS_DRAM_SIZE 0x02000000
|
||||
#else /* 16MB SDRAM */
|
||||
# define CONFIG_SYS_SDR_CONFIG 0x3A
|
||||
# define PHYS_SDRAM_1_SIZE 0x01000000
|
||||
# define CONFIG_SYS_SDRAM_REFRESH_CNT 0x81a
|
||||
# define CONFIG_SYS_SDR_MODE_CONFIG 0x1
|
||||
# define CONFIG_SYS_DRAM_SIZE 0x01000000
|
||||
#endif
|
||||
|
||||
/* FLASH organization */
|
||||
#define CONFIG_SYS_TEXT_BASE 0x50000000
|
||||
#ifdef CONFIG_FLASH2X2
|
||||
# define CONFIG_SYS_MAX_FLASH_BANKS 2
|
||||
/* max number of sectors on one chip */
|
||||
# define CONFIG_SYS_MAX_FLASH_SECT 40
|
||||
# define PHYS_FLASH_1 0x50000000
|
||||
# define PHYS_FLASH_2 0x50200000
|
||||
# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
|
||||
#endif
|
||||
#ifdef CONFIG_FLASH1X8
|
||||
# define CONFIG_SYS_MAX_FLASH_BANKS 1
|
||||
/* max number of sectors on one chip */
|
||||
# define CONFIG_SYS_MAX_FLASH_SECT 140
|
||||
# define PHYS_FLASH_1 0x50000000
|
||||
# define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1 }
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
|
||||
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
||||
#define CONFIG_BOARD_SIZE_LIMIT 262144
|
||||
|
||||
/* Use common CFI driver */
|
||||
#define CONFIG_SYS_FLASH_CFI
|
||||
#define CONFIG_FLASH_CFI_DRIVER
|
||||
/* no byte writes on IXP4xx */
|
||||
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
||||
/* print 'E' for empty sector on flinfo */
|
||||
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
||||
|
||||
/* Ethernet */
|
||||
|
||||
/* include IXP4xx NPE support */
|
||||
#define CONFIG_IXP4XX_NPE 1
|
||||
/* NPE0 PHY address */
|
||||
#define CONFIG_PHY_ADDR 0
|
||||
/* NPE1 PHY address (HW Release E only) */
|
||||
#define CONFIG_PHY1_ADDR 1
|
||||
/* MII PHY management */
|
||||
#define CONFIG_MII 1
|
||||
/* Number of ethernet rx buffers & descriptors */
|
||||
#define CONFIG_SYS_RX_ETH_BUFFER 16
|
||||
#define CONFIG_RESET_PHY_R 1
|
||||
|
||||
#define CONFIG_HAS_ETH1 1
|
||||
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_NET
|
||||
#define CONFIG_CMD_MII
|
||||
#define CONFIG_CMD_PING
|
||||
#undef CONFIG_CMD_NFS
|
||||
|
||||
/* BOOTP options */
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* Cache Configuration */
|
||||
#define CONFIG_SYS_CACHELINE_SIZE 32
|
||||
|
||||
/*
|
||||
* environment organization:
|
||||
* one flash sector, embedded in uboot area (bottom bootblock flash)
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x4000)
|
||||
#define CONFIG_SYS_USE_PPCENV 1
|
||||
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"npe_ucode=50040000\0" \
|
||||
"mtd=IXP4XX-Flash.0:256k(uboot),64k(ucode),1152k(linux),-(root)\0" \
|
||||
"kerneladdr=50050000\0" \
|
||||
"kernelfile=actux1/uImage\0" \
|
||||
"rootfile=actux1/rootfs\0" \
|
||||
"rootaddr=50170000\0" \
|
||||
"loadaddr=10000\0" \
|
||||
"updateboot_ser=mw.b 10000 ff 40000;" \
|
||||
" loady ${loadaddr};" \
|
||||
" run eraseboot writeboot\0" \
|
||||
"updateboot_net=mw.b 10000 ff 40000;" \
|
||||
" tftp ${loadaddr} actux1/u-boot.bin;" \
|
||||
" run eraseboot writeboot\0" \
|
||||
"eraseboot=protect off 50000000 50003fff;" \
|
||||
" protect off 50006000 5003ffff;" \
|
||||
" erase 50000000 50003fff;" \
|
||||
" erase 50006000 5003ffff\0" \
|
||||
"writeboot=cp.b 10000 50000000 4000;" \
|
||||
" cp.b 16000 50006000 3a000\0" \
|
||||
"updateucode=loady;" \
|
||||
" era ${npe_ucode} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${npe_ucode} ${filesize}\0" \
|
||||
"updateroot=tftp ${loadaddr} ${rootfile};" \
|
||||
" era ${rootaddr} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${rootaddr} ${filesize}\0" \
|
||||
"updatekern=tftp ${loadaddr} ${kernelfile};" \
|
||||
" era ${kerneladdr} +${filesize};" \
|
||||
" cp.b ${loadaddr} ${kerneladdr} ${filesize}\0" \
|
||||
"flashargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
|
||||
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
|
||||
"netargs=setenv bootargs mtdparts=${mtd} root=/dev/mtdblock3" \
|
||||
" rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
|
||||
"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0" \
|
||||
"addeth=setenv bootargs ${bootargs} ethaddr=${ethaddr}\0" \
|
||||
"boot_flash=run flashargs addtty addeth;" \
|
||||
" bootm ${kerneladdr}\0" \
|
||||
"boot_net=run netargs addtty addeth;" \
|
||||
" tftpboot ${loadaddr} ${kernelfile};" \
|
||||
" bootm\0"
|
||||
|
||||
/* additions for new relocation code, must be added to all boards */
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user