spi: zynqmp_gqspi: Fix write issue

Enable manual start in zynqmp_qspi_fill_gen_fifo().
Also enable GQSPI_IXR_GFNFULL_MASK and check for it instead of
GQSPI_IXR_GFEMTY_MASK.

Add dummy write to genfifo register in chipselect.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com>
This commit is contained in:
Ashok Reddy Soma 2021-05-25 06:36:27 -06:00 committed by Michal Simek
parent 3414712ba8
commit 2ffa653798

View File

@ -39,6 +39,7 @@
#define GQSPI_IXR_TXFULL_MASK 0x00000008 /* QSPI TX FIFO is full */
#define GQSPI_IXR_RXNEMTY_MASK 0x00000010 /* QSPI RX FIFO Not Empty */
#define GQSPI_IXR_GFEMTY_MASK 0x00000080 /* QSPI Generic FIFO Empty */
#define GQSPI_IXR_GFNFULL_MASK 0x00000200 /* QSPI GENFIFO not full */
#define GQSPI_IXR_ALL_MASK (GQSPI_IXR_TXNFULL_MASK | \
GQSPI_IXR_RXNEMTY_MASK)
@ -238,9 +239,21 @@ static void zynqmp_qspi_fill_gen_fifo(struct zynqmp_qspi_priv *priv,
u32 gqspi_fifo_reg)
{
struct zynqmp_qspi_regs *regs = priv->regs;
u32 config_reg, ier;
int ret = 0;
ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_GFEMTY_MASK, 1,
config_reg = readl(&regs->confr);
/* Manual start if needed */
config_reg |= GQSPI_STRT_GEN_FIFO;
writel(config_reg, &regs->confr);
/* Enable interrupts */
ier = readl(&regs->ier);
ier |= GQSPI_IXR_GFNFULL_MASK;
writel(ier, &regs->ier);
/* Wait until the fifo is not full to write the new command */
ret = wait_for_bit_le32(&regs->isr, GQSPI_IXR_GFNFULL_MASK, 1,
GQSPI_TIMEOUT, 1);
if (ret)
printf("%s Timeout\n", __func__);
@ -263,6 +276,9 @@ static void zynqmp_qspi_chipselect(struct zynqmp_qspi_priv *priv, int is_on)
debug("GFIFO_CMD_CS: 0x%x\n", gqspi_fifo_reg);
/* Dummy generic FIFO entry */
zynqmp_qspi_fill_gen_fifo(priv, 0);
zynqmp_qspi_fill_gen_fifo(priv, gqspi_fifo_reg);
}