ARM: tegra: remove Whistler support
Whistler is an ancient Tegra 2 reference board. I may have been the only person who ever used it with upstream software, and I've just recycled the board hardware. Hence, it makes sense to remove support from software. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Stephen Warren
Tom Warren
parent
8cb3ce64f9
commit
2eb3e28b2c
@ -60,7 +60,6 @@ dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \
|
||||
tegra20-tec.dtb \
|
||||
tegra20-trimslice.dtb \
|
||||
tegra20-ventana.dtb \
|
||||
tegra20-whistler.dtb \
|
||||
tegra20-colibri.dtb \
|
||||
tegra30-apalis.dtb \
|
||||
tegra30-beaver.dtb \
|
||||
|
||||
@ -1,77 +0,0 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "tegra20.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NVIDIA Tegra20 Whistler evaluation board";
|
||||
compatible = "nvidia,whistler", "nvidia,tegra20";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uarta;
|
||||
};
|
||||
|
||||
aliases {
|
||||
i2c0 = "/i2c@7000d000";
|
||||
usb0 = "/usb@c5008000";
|
||||
mmc0 = "/sdhci@c8000600";
|
||||
mmc1 = "/sdhci@c8000400";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = < 0x00000000 0x20000000 >;
|
||||
};
|
||||
|
||||
serial@70006000 {
|
||||
clock-frequency = < 216000000 >;
|
||||
};
|
||||
|
||||
i2c@7000d000 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@3c {
|
||||
compatible = "maxim,max8907b";
|
||||
reg = <0x3c>;
|
||||
|
||||
clk_32k: clock {
|
||||
compatible = "fixed-clock";
|
||||
/*
|
||||
* leave out for now due to CPP:
|
||||
* #clock-cells = <0>;
|
||||
*/
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb@c5008000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@c8000400 {
|
||||
status = "okay";
|
||||
wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
sdhci@c8000600 {
|
||||
status = "okay";
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
clocks {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clk32k_in: clock@0 {
|
||||
compatible = "fixed-clock";
|
||||
reg=<0>;
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
@ -36,10 +36,6 @@ config TARGET_VENTANA
|
||||
bool "NVIDIA Tegra20 Ventana evaluation board"
|
||||
select BOARD_LATE_INIT
|
||||
|
||||
config TARGET_WHISTLER
|
||||
bool "NVIDIA Tegra20 Whistler evaluation board"
|
||||
select BOARD_LATE_INIT
|
||||
|
||||
config TARGET_COLIBRI_T20
|
||||
bool "Toradex Colibri T20 board"
|
||||
select BOARD_LATE_INIT
|
||||
@ -57,7 +53,6 @@ source "board/nvidia/seaboard/Kconfig"
|
||||
source "board/avionic-design/tec/Kconfig"
|
||||
source "board/compulab/trimslice/Kconfig"
|
||||
source "board/nvidia/ventana/Kconfig"
|
||||
source "board/nvidia/whistler/Kconfig"
|
||||
source "board/toradex/colibri_t20/Kconfig"
|
||||
|
||||
endif
|
||||
|
||||
@ -1,12 +0,0 @@
|
||||
if TARGET_WHISTLER
|
||||
|
||||
config SYS_BOARD
|
||||
default "whistler"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "nvidia"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "whistler"
|
||||
|
||||
endif
|
||||
@ -1,7 +0,0 @@
|
||||
WHISTLER BOARD
|
||||
M: Tom Warren <twarren@nvidia.com>
|
||||
M: Stephen Warren <swarren@nvidia.com>
|
||||
S: Maintained
|
||||
F: board/nvidia/whistler/
|
||||
F: include/configs/whistler.h
|
||||
F: configs/whistler_defconfig
|
||||
@ -1,8 +0,0 @@
|
||||
#
|
||||
# (C) Copyright 2010-2012
|
||||
# NVIDIA Corporation <www.nvidia.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y := whistler.o
|
||||
@ -1,80 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2010-2012
|
||||
* NVIDIA Corporation <www.nvidia.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/tegra.h>
|
||||
#include <asm/arch/clock.h>
|
||||
#include <asm/arch/funcmux.h>
|
||||
#include <asm/arch/pinmux.h>
|
||||
#include <asm/gpio.h>
|
||||
#include <i2c.h>
|
||||
|
||||
#ifdef CONFIG_MMC_SDHCI_TEGRA
|
||||
/*
|
||||
* Routine: pin_mux_mmc
|
||||
* Description: setup the pin muxes/tristate values for the SDMMC(s)
|
||||
*/
|
||||
void pin_mux_mmc(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
uchar val;
|
||||
int ret;
|
||||
|
||||
/* Turn on MAX8907B LDO12 to 2.8V for J40 power */
|
||||
ret = i2c_get_chip_for_busnum(0, 0x3c, 1, &dev);
|
||||
if (ret) {
|
||||
printf("%s: Cannot find MAX8907B I2C chip\n", __func__);
|
||||
return;
|
||||
}
|
||||
val = 0x29;
|
||||
ret = dm_i2c_write(dev, 0x46, &val, 1);
|
||||
if (ret)
|
||||
printf("i2c_write 0 0x3c 0x46 failed: %d\n", ret);
|
||||
val = 0x00;
|
||||
ret = dm_i2c_write(dev, 0x45, &val, 1);
|
||||
if (ret)
|
||||
printf("i2c_write 0 0x3c 0x45 failed: %d\n", ret);
|
||||
val = 0x1f;
|
||||
ret = dm_i2c_write(dev, 0x44, &val, 1);
|
||||
if (ret)
|
||||
printf("i2c_write 0 0x3c 0x44 failed: %d\n", ret);
|
||||
|
||||
funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_SLXA_8BIT);
|
||||
funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATC_ATD_8BIT);
|
||||
}
|
||||
#endif
|
||||
|
||||
/* this is a weak define that we are overriding */
|
||||
void pin_mux_usb(void)
|
||||
{
|
||||
struct udevice *dev;
|
||||
uchar val;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* This is a hack. This should be represented in DT using the
|
||||
* vbus-gpio property. However, U-Boot's DT support doesn't
|
||||
* support any GPIO controller other than the Tegra's yet.
|
||||
*/
|
||||
|
||||
/* Turn on TAC6416's GPIO 0+1 for USB1/3's VBUS */
|
||||
ret = i2c_get_chip_for_busnum(0, 0x20, 1, &dev);
|
||||
if (ret) {
|
||||
printf("%s: Cannot find TAC6416 I2C chip\n", __func__);
|
||||
return;
|
||||
}
|
||||
val = 0x03;
|
||||
ret = dm_i2c_write(dev, 2, &val, 1);
|
||||
if (ret)
|
||||
printf("i2c_write 0 0x20 2 failed: %d\n", ret);
|
||||
val = 0xfc;
|
||||
ret = dm_i2c_write(dev, 6, &val, 1);
|
||||
if (ret)
|
||||
printf("i2c_write 0 0x20 6 failed: %d\n", ret);
|
||||
}
|
||||
@ -1,29 +0,0 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_TEGRA=y
|
||||
CONFIG_TEGRA20=y
|
||||
CONFIG_TARGET_WHISTLER=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler"
|
||||
CONFIG_OF_SYSTEM_SETUP=y
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
CONFIG_SYS_STDIO_DEREGISTER=y
|
||||
CONFIG_SYS_PROMPT="Tegra20 (Whistler) # "
|
||||
# CONFIG_CMD_IMI is not set
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_FPGA is not set
|
||||
CONFIG_CMD_GPIO=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_SPL_ISO_PARTITION is not set
|
||||
# CONFIG_SPL_EFI_PARTITION is not set
|
||||
CONFIG_SPL_DM=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
@ -1,49 +0,0 @@
|
||||
/*
|
||||
* (C) Copyright 2010-2012
|
||||
* NVIDIA Corporation <www.nvidia.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <linux/sizes.h>
|
||||
#include "tegra20-common.h"
|
||||
|
||||
/* High-level configuration options */
|
||||
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler"
|
||||
|
||||
/* Board-specific serial config */
|
||||
#define CONFIG_TEGRA_ENABLE_UARTA
|
||||
#define CONFIG_TEGRA_UARTA_UAA_UAB
|
||||
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
|
||||
|
||||
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
|
||||
|
||||
/* I2C */
|
||||
#define CONFIG_SYS_I2C_TEGRA
|
||||
|
||||
/*
|
||||
* Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes
|
||||
* the user plugged the standard 8GB MoviNAND card into J29/HSMMC/POP. If
|
||||
* they didn't, the boot sector layout may be different. However, use of that
|
||||
* particular card is standard practice as far as I know.
|
||||
*/
|
||||
#define CONFIG_ENV_IS_IN_MMC
|
||||
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
|
||||
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||
#define CONFIG_SYS_MMC_ENV_PART 2
|
||||
|
||||
/* USB Host support */
|
||||
#define CONFIG_USB_EHCI_TEGRA
|
||||
|
||||
/* USB networking support */
|
||||
#define CONFIG_USB_HOST_ETHER
|
||||
#define CONFIG_USB_ETHER_ASIX
|
||||
|
||||
/* General networking support */
|
||||
|
||||
#include "tegra-common-post.h"
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue
Block a user