diff --git a/drivers/Kconfig b/drivers/Kconfig index 75ac149d31..9101e538b0 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -62,6 +62,8 @@ source "drivers/mailbox/Kconfig" source "drivers/memory/Kconfig" +source "drivers/mfd/Kconfig" + source "drivers/misc/Kconfig" source "drivers/mmc/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 6f1de58e00..83b14ef1fd 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -103,6 +103,7 @@ obj-$(CONFIG_QE) += qe/ obj-$(CONFIG_U_QE) += qe/ obj-y += mailbox/ obj-y += memory/ +obj-y += mfd/ obj-y += mtd/ obj-y += pwm/ obj-y += reset/ diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig new file mode 100644 index 0000000000..ae53b02f27 --- /dev/null +++ b/drivers/mfd/Kconfig @@ -0,0 +1,4 @@ +config MFD_ATMEL_SMC + bool "Atmel Static Memory Controller driver" + help + Say yes here to support Atmel Static Memory Controller driver. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile new file mode 100644 index 0000000000..4454815a98 --- /dev/null +++ b/drivers/mfd/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_MFD_ATMEL_SMC) += atmel-smc.o diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c new file mode 100644 index 0000000000..15296f71a1 --- /dev/null +++ b/drivers/mfd/atmel-smc.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Atmel SMC (Static Memory Controller) helper functions. + * + * Copyright (C) 2022 Microchip Technology Inc. + * Copyright (C) 2017 Free Electrons + * + * Author: Boris Brezillon + */ + +#include +#include +#include +#include +#include +#include + +/** + * atmel_smc_cs_conf_init - initialize a SMC CS conf + * @conf: the SMC CS conf to initialize + * + * Set all fields to 0 so that one can start defining a new config. + */ +void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf) +{ + memset(conf, 0, sizeof(*conf)); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_init); + +/** + * atmel_smc_cs_encode_ncycles - encode a number of MCK clk cycles in the + * format expected by the SMC engine + * @ncycles: number of MCK clk cycles + * @msbpos: position of the MSB part of the timing field + * @msbwidth: width of the MSB part of the timing field + * @msbfactor: factor applied to the MSB + * @encodedval: param used to store the encoding result + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Setup/Pulse/Cycle/Timings Register"). This is a generic + * helper which called with different parameter depending on the encoding + * scheme. + * + * If the @ncycles value is too big to be encoded, -ERANGE is returned and + * the encodedval is contains the maximum val. Otherwise, 0 is returned. + */ +static int atmel_smc_cs_encode_ncycles(unsigned int ncycles, + unsigned int msbpos, + unsigned int msbwidth, + unsigned int msbfactor, + unsigned int *encodedval) +{ + unsigned int lsbmask = GENMASK(msbpos - 1, 0); + unsigned int msbmask = GENMASK(msbwidth - 1, 0); + unsigned int msb, lsb; + int ret = 0; + + msb = ncycles / msbfactor; + lsb = ncycles % msbfactor; + + if (lsb > lsbmask) { + lsb = 0; + msb++; + } + + /* + * Let's just put the maximum we can if the requested setting does + * not fit in the register field. + * We still return -ERANGE in case the caller cares. + */ + if (msb > msbmask) { + msb = msbmask; + lsb = lsbmask; + ret = -ERANGE; + } + + *encodedval = (msb << msbpos) | lsb; + + return ret; +} + +/** + * atmel_smc_cs_conf_set_timing - set the SMC CS conf Txx parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the Txx field in the TIMINGS register + * @ncycles: value (expressed in MCK clk cycles) to assign to this Txx + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Timings Register"), and then stores the result in the + * @conf->timings field at @shift position. + * + * Returns -EINVAL if shift is invalid, -ERANGE if ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_HSMC_TIMINGS_TCLR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TADL_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TAR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TRR_SHIFT && + shift != ATMEL_HSMC_TIMINGS_TWB_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "HSMC Timings + * Register"): + * + * ncycles = (Txx[3] * 64) + Txx[2:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 3, 1, 64, &val); + conf->timings &= ~GENMASK(shift + 3, shift); + conf->timings |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_timing); + +/** + * atmel_smc_cs_conf_set_setup - set the SMC CS conf xx_SETUP parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_SETUP field in the SETUP register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_SETUP + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Setup Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && + shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Setup + * Register"): + * + * ncycles = (128 * xx_SETUP[5]) + xx_SETUP[4:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 5, 1, 128, &val); + conf->setup &= ~GENMASK(shift + 7, shift); + conf->setup |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_setup); + +/** + * atmel_smc_cs_conf_set_pulse - set the SMC CS conf xx_PULSE parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_PULSE field in the PULSE register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_PULSE + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Pulse Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NCS_WR_SHIFT && + shift != ATMEL_SMC_NRD_SHIFT && shift != ATMEL_SMC_NCS_RD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Pulse + * Register"): + * + * ncycles = (256 * xx_PULSE[6]) + xx_PULSE[5:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 6, 1, 256, &val); + conf->pulse &= ~GENMASK(shift + 7, shift); + conf->pulse |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_pulse); + +/** + * atmel_smc_cs_conf_set_cycle - set the SMC CS conf xx_CYCLE parameter to a + * specific value + * @conf: SMC CS conf descriptor + * @shift: the position of the xx_CYCLE field in the CYCLE register + * @ncycles: value (expressed in MCK clk cycles) to assign to this xx_CYCLE + * parameter + * + * This function encodes the @ncycles value as described in the datasheet + * (section "SMC Cycle Register"), and then stores the result in the + * @conf->setup field at @shift position. + * + * Returns -EINVAL if @shift is invalid, -ERANGE if @ncycles does not fit in + * the field, and 0 otherwise. + */ +int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles) +{ + unsigned int val; + int ret; + + if (shift != ATMEL_SMC_NWE_SHIFT && shift != ATMEL_SMC_NRD_SHIFT) + return -EINVAL; + + /* + * The formula described in atmel datasheets (section "SMC Cycle + * Register"): + * + * ncycles = (xx_CYCLE[8:7] * 256) + xx_CYCLE[6:0] + */ + ret = atmel_smc_cs_encode_ncycles(ncycles, 7, 2, 256, &val); + conf->cycle &= ~GENMASK(shift + 15, shift); + conf->cycle |= val << shift; + + return ret; +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); + +/** + * atmel_smc_cs_conf_apply - apply an SMC CS conf + * @regmap: the SMC regmap + * @cs: the CS id + * @conf: the SMC CS conf to apply + * + * Applies an SMC CS configuration. + * Only valid on at91sam9/avr32 SoCs. + */ +void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, + const struct atmel_smc_cs_conf *conf) +{ + regmap_write(regmap, ATMEL_SMC_SETUP(cs), conf->setup); + regmap_write(regmap, ATMEL_SMC_PULSE(cs), conf->pulse); + regmap_write(regmap, ATMEL_SMC_CYCLE(cs), conf->cycle); + regmap_write(regmap, ATMEL_SMC_MODE(cs), conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_apply); + +/** + * atmel_hsmc_cs_conf_apply - apply an SMC CS conf + * @regmap: the HSMC regmap + * @cs: the CS id + * @layout: the layout of registers + * @conf: the SMC CS conf to apply + * + * Applies an SMC CS configuration. + * Only valid on post-sama5 SoCs. + */ +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, const struct atmel_smc_cs_conf *conf) +{ + regmap_write(regmap, ATMEL_HSMC_SETUP(layout, cs), conf->setup); + regmap_write(regmap, ATMEL_HSMC_PULSE(layout, cs), conf->pulse); + regmap_write(regmap, ATMEL_HSMC_CYCLE(layout, cs), conf->cycle); + regmap_write(regmap, ATMEL_HSMC_TIMINGS(layout, cs), conf->timings); + regmap_write(regmap, ATMEL_HSMC_MODE(layout, cs), conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); + +/** + * atmel_smc_cs_conf_get - retrieve the current SMC CS conf + * @regmap: the SMC regmap + * @cs: the CS id + * @conf: the SMC CS conf object to store the current conf + * + * Retrieve the SMC CS configuration. + * Only valid on at91sam9/avr32 SoCs. + */ +void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, + struct atmel_smc_cs_conf *conf) +{ + regmap_read(regmap, ATMEL_SMC_SETUP(cs), &conf->setup); + regmap_read(regmap, ATMEL_SMC_PULSE(cs), &conf->pulse); + regmap_read(regmap, ATMEL_SMC_CYCLE(cs), &conf->cycle); + regmap_read(regmap, ATMEL_SMC_MODE(cs), &conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_get); + +/** + * atmel_hsmc_cs_conf_get - retrieve the current SMC CS conf + * @regmap: the HSMC regmap + * @cs: the CS id + * @layout: the layout of registers + * @conf: the SMC CS conf object to store the current conf + * + * Retrieve the SMC CS configuration. + * Only valid on post-sama5 SoCs. + */ +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *layout, + int cs, struct atmel_smc_cs_conf *conf) +{ + regmap_read(regmap, ATMEL_HSMC_SETUP(layout, cs), &conf->setup); + regmap_read(regmap, ATMEL_HSMC_PULSE(layout, cs), &conf->pulse); + regmap_read(regmap, ATMEL_HSMC_CYCLE(layout, cs), &conf->cycle); + regmap_read(regmap, ATMEL_HSMC_TIMINGS(layout, cs), &conf->timings); + regmap_read(regmap, ATMEL_HSMC_MODE(layout, cs), &conf->mode); +} +EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_get); + +static const struct atmel_hsmc_reg_layout sama5d3_reg_layout = { + .timing_regs_offset = 0x600, +}; + +static const struct atmel_hsmc_reg_layout sama5d2_reg_layout = { + .timing_regs_offset = 0x700, +}; + +static const struct udevice_id atmel_smc_ids[] = { + { .compatible = "atmel,at91sam9260-smc", .data = (ulong)0 }, + { .compatible = "atmel,sama5d3-smc", .data = (ulong)&sama5d3_reg_layout }, + { .compatible = "atmel,sama5d2-smc", .data = (ulong)&sama5d2_reg_layout }, + { /* sentinel */ }, +}; + +/** + * atmel_hsmc_get_reg_layout - retrieve the layout of HSMC registers + * @np: the HSMC regmap + * + * Retrieve the layout of HSMC registers. + * + * Returns NULL in case of SMC, a struct atmel_hsmc_reg_layout pointer + * in HSMC case, otherwise ERR_PTR(-EINVAL). + */ +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(ofnode np) +{ + int i; + const struct udevice_id *match; + const char *name; + int len; + + name = ofnode_get_property(np, "compatible", &len); + + for (i = 0; i < ARRAY_SIZE(atmel_smc_ids); i++) { + if (!strcmp(name, atmel_smc_ids[i].compatible)) { + match = &atmel_smc_ids[i]; + break; + } + } + + return match ? (struct atmel_hsmc_reg_layout *)match->data : ERR_PTR(-EINVAL); +} diff --git a/include/linux/mfd/syscon/atmel-smc.h b/include/linux/mfd/syscon/atmel-smc.h new file mode 100644 index 0000000000..74be5a199f --- /dev/null +++ b/include/linux/mfd/syscon/atmel-smc.h @@ -0,0 +1,119 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Atmel SMC (Static Memory Controller) register offsets and bit definitions. + * + * Copyright (C) 2014 Atmel + * Copyright (C) 2014 Free Electrons + * + * Author: Boris Brezillon + */ + +#ifndef _LINUX_MFD_SYSCON_ATMEL_SMC_H_ +#define _LINUX_MFD_SYSCON_ATMEL_SMC_H_ + +#include +#include +#include + +#define ATMEL_SMC_SETUP(cs) (((cs) * 0x10)) +#define ATMEL_HSMC_SETUP(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14)) +#define ATMEL_SMC_PULSE(cs) (((cs) * 0x10) + 0x4) +#define ATMEL_HSMC_PULSE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x4) +#define ATMEL_SMC_CYCLE(cs) (((cs) * 0x10) + 0x8) +#define ATMEL_HSMC_CYCLE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x8) +#define ATMEL_SMC_NWE_SHIFT 0 +#define ATMEL_SMC_NCS_WR_SHIFT 8 +#define ATMEL_SMC_NRD_SHIFT 16 +#define ATMEL_SMC_NCS_RD_SHIFT 24 + +#define ATMEL_SMC_MODE(cs) (((cs) * 0x10) + 0xc) +#define ATMEL_HSMC_MODE(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0x10) +#define ATMEL_SMC_MODE_READMODE_MASK BIT(0) +#define ATMEL_SMC_MODE_READMODE_NCS (0 << 0) +#define ATMEL_SMC_MODE_READMODE_NRD (1 << 0) +#define ATMEL_SMC_MODE_WRITEMODE_MASK BIT(1) +#define ATMEL_SMC_MODE_WRITEMODE_NCS (0 << 1) +#define ATMEL_SMC_MODE_WRITEMODE_NWE (1 << 1) +#define ATMEL_SMC_MODE_EXNWMODE_MASK GENMASK(5, 4) +#define ATMEL_SMC_MODE_EXNWMODE_DISABLE (0 << 4) +#define ATMEL_SMC_MODE_EXNWMODE_FROZEN (2 << 4) +#define ATMEL_SMC_MODE_EXNWMODE_READY (3 << 4) +#define ATMEL_SMC_MODE_BAT_MASK BIT(8) +#define ATMEL_SMC_MODE_BAT_SELECT (0 << 8) +#define ATMEL_SMC_MODE_BAT_WRITE (1 << 8) +#define ATMEL_SMC_MODE_DBW_MASK GENMASK(13, 12) +#define ATMEL_SMC_MODE_DBW_8 (0 << 12) +#define ATMEL_SMC_MODE_DBW_16 (1 << 12) +#define ATMEL_SMC_MODE_DBW_32 (2 << 12) +#define ATMEL_SMC_MODE_TDF_MASK GENMASK(19, 16) +#define ATMEL_SMC_MODE_TDF(x) (((x) - 1) << 16) +#define ATMEL_SMC_MODE_TDF_MAX 16 +#define ATMEL_SMC_MODE_TDF_MIN 1 +#define ATMEL_SMC_MODE_TDFMODE_OPTIMIZED BIT(20) +#define ATMEL_SMC_MODE_PMEN BIT(24) +#define ATMEL_SMC_MODE_PS_MASK GENMASK(29, 28) +#define ATMEL_SMC_MODE_PS_4 (0 << 28) +#define ATMEL_SMC_MODE_PS_8 (1 << 28) +#define ATMEL_SMC_MODE_PS_16 (2 << 28) +#define ATMEL_SMC_MODE_PS_32 (3 << 28) + +#define ATMEL_HSMC_TIMINGS(layout, cs) \ + ((layout)->timing_regs_offset + ((cs) * 0x14) + 0xc) +#define ATMEL_HSMC_TIMINGS_OCMS BIT(12) +#define ATMEL_HSMC_TIMINGS_RBNSEL(x) ((x) << 28) +#define ATMEL_HSMC_TIMINGS_NFSEL BIT(31) +#define ATMEL_HSMC_TIMINGS_TCLR_SHIFT 0 +#define ATMEL_HSMC_TIMINGS_TADL_SHIFT 4 +#define ATMEL_HSMC_TIMINGS_TAR_SHIFT 8 +#define ATMEL_HSMC_TIMINGS_TRR_SHIFT 16 +#define ATMEL_HSMC_TIMINGS_TWB_SHIFT 24 + +struct atmel_hsmc_reg_layout { + unsigned int timing_regs_offset; +}; + +/** + * struct atmel_smc_cs_conf - SMC CS config as described in the datasheet. + * @setup: NCS/NWE/NRD setup timings (not applicable to at91rm9200) + * @pulse: NCS/NWE/NRD pulse timings (not applicable to at91rm9200) + * @cycle: NWE/NRD cycle timings (not applicable to at91rm9200) + * @timings: advanced NAND related timings (only applicable to HSMC) + * @mode: all kind of config parameters (see the fields definition above). + * The mode fields are different on at91rm9200 + */ +struct atmel_smc_cs_conf { + u32 setup; + u32 pulse; + u32 cycle; + u32 timings; + u32 mode; +}; + +void atmel_smc_cs_conf_init(struct atmel_smc_cs_conf *conf); +int atmel_smc_cs_conf_set_timing(struct atmel_smc_cs_conf *conf, + unsigned int shift, + unsigned int ncycles); +int atmel_smc_cs_conf_set_setup(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +int atmel_smc_cs_conf_set_pulse(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +int atmel_smc_cs_conf_set_cycle(struct atmel_smc_cs_conf *conf, + unsigned int shift, unsigned int ncycles); +void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, + const struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_apply(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, const struct atmel_smc_cs_conf *conf); +void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, + struct atmel_smc_cs_conf *conf); +void atmel_hsmc_cs_conf_get(struct regmap *regmap, + const struct atmel_hsmc_reg_layout *reglayout, + int cs, struct atmel_smc_cs_conf *conf); +const struct atmel_hsmc_reg_layout * +atmel_hsmc_get_reg_layout(ofnode np); + +#endif /* _LINUX_MFD_SYSCON_ATMEL_SMC_H_ */