leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

Browse Source
This commit is contained in:
Tom Rini 2014-12-11 18:28:09 -05:00
commit 2c49323d5d
53 changed files with 1904 additions and 221 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Makefile
View File

@ -999,15 +999,22 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
#concatenated with u-boot binary. It is need by PowerPC SoC having
#internal SRAM <= 512KB.
MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
-A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
ifeq ($(ARCH),arm)
UBOOT_BINLOAD := u-boot.img
else
UBOOT_BINLOAD := u-boot.bin
endif
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
$(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector

6
arch/arm/Kconfig
View File

@ -733,12 +733,14 @@ config TARGET_LS2085A_SIMU
select ARM64
config TARGET_LS1021AQDS
bool "Support ls1021aqds_nor"
bool "Support ls1021aqds"
select CPU_V7
select SUPPORT_SPL
config TARGET_LS1021ATWR
bool "Support ls1021atwr_nor"
bool "Support ls1021atwr"
select CPU_V7
select SUPPORT_SPL
config TARGET_BALLOON3
bool "Support balloon3"

2
arch/arm/cpu/armv7/ls102xa/Makefile
View File

@ -7,6 +7,8 @@
obj-y += cpu.o
obj-y += clock.o
obj-y += timer.o
obj-y += fsl_epu.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_SYS_HAS_SERDES) += fsl_ls1_serdes.o ls102xa_serdes.o
obj-$(CONFIG_SPL) += spl.o

34
arch/arm/cpu/armv7/ls102xa/cpu.c
View File

@ -12,6 +12,8 @@
#include <netdev.h>
#include <fsl_esdhc.h>
#include "fsl_epu.h"
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_DISPLAY_CPUINFO)
@ -101,3 +103,35 @@ int cpu_eth_init(bd_t *bis)
return 0;
}
int arch_cpu_init(void)
{
void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET);
/*
* After wakeup from deep sleep, Clear EPU registers
* as early as possible to prevent from possible issue.
* It's also safe to clear at normal boot.
*/
fsl_epu_clean(epu_base);
return 0;
}
#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
/* Set the address at which the secondary core starts from.*/
void smp_set_core_boot_addr(unsigned long addr, int corenr)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
out_be32(&gur->scratchrw[0], addr);
}
/* Release the secondary core from holdoff state and kick it */
void smp_kick_all_cpus(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
out_be32(&gur->brrl, 0x2);
}
#endif

2
arch/arm/cpu/armv7/ls102xa/fdt.c
View File

@ -91,7 +91,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
}
do_fixup_by_prop_u32(blob, "device_type", "soc",
4, "bus-frequency", busclk / 2, 1);
4, "bus-frequency", busclk, 1);
ft_fixup_enet_phy_connect_type(blob);

57
arch/arm/cpu/armv7/ls102xa/fsl_epu.c Normal file
View File

@ -0,0 +1,57 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include "fsl_epu.h"
/**
* fsl_epu_clean - Clear EPU registers
*/
void fsl_epu_clean(void *epu_base)
{
u32 offset;
/* follow the exact sequence to clear the registers */
/* Clear EPACRn */
for (offset = EPACR0; offset <= EPACR15; offset += EPACR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPEVTCRn */
for (offset = EPEVTCR0; offset <= EPEVTCR9; offset += EPEVTCR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPGCR */
out_be32(epu_base + EPGCR, 0);
/* Clear EPSMCRn */
for (offset = EPSMCR0; offset <= EPSMCR15; offset += EPSMCR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPCCRn */
for (offset = EPCCR0; offset <= EPCCR31; offset += EPCCR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPCMPRn */
for (offset = EPCMPR0; offset <= EPCMPR31; offset += EPCMPR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPCTRn */
for (offset = EPCTR0; offset <= EPCTR31; offset += EPCTR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPIMCRn */
for (offset = EPIMCR0; offset <= EPIMCR31; offset += EPIMCR_STRIDE)
out_be32(epu_base + offset, 0);
/* Clear EPXTRIGCRn */
out_be32(epu_base + EPXTRIGCR, 0);
/* Clear EPECRn */
for (offset = EPECR0; offset <= EPECR15; offset += EPECR_STRIDE)
out_be32(epu_base + offset, 0);
}

68
arch/arm/cpu/armv7/ls102xa/fsl_epu.h Normal file
View File

@ -0,0 +1,68 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FSL_EPU_H
#define __FSL_EPU_H
#include <asm/types.h>
#define FSL_STRIDE_4B 4
#define FSL_STRIDE_8B 8
/* Block offsets */
#define EPU_BLOCK_OFFSET 0x00000000
/* EPGCR (Event Processor Global Control Register) */
#define EPGCR 0x000
/* EPEVTCR0-9 (Event Processor EVT Pin Control Registers) */
#define EPEVTCR0 0x050
#define EPEVTCR9 0x074
#define EPEVTCR_STRIDE FSL_STRIDE_4B
/* EPXTRIGCR (Event Processor Crosstrigger Control Register) */
#define EPXTRIGCR 0x090
/* EPIMCR0-31 (Event Processor Input Mux Control Registers) */
#define EPIMCR0 0x100
#define EPIMCR31 0x17C
#define EPIMCR_STRIDE FSL_STRIDE_4B
/* EPSMCR0-15 (Event Processor SCU Mux Control Registers) */
#define EPSMCR0 0x200
#define EPSMCR15 0x278
#define EPSMCR_STRIDE FSL_STRIDE_8B
/* EPECR0-15 (Event Processor Event Control Registers) */
#define EPECR0 0x300
#define EPECR15 0x33C
#define EPECR_STRIDE FSL_STRIDE_4B
/* EPACR0-15 (Event Processor Action Control Registers) */
#define EPACR0 0x400
#define EPACR15 0x43C
#define EPACR_STRIDE FSL_STRIDE_4B
/* EPCCRi0-15 (Event Processor Counter Control Registers) */
#define EPCCR0 0x800
#define EPCCR15 0x83C
#define EPCCR31 0x87C
#define EPCCR_STRIDE FSL_STRIDE_4B
/* EPCMPR0-15 (Event Processor Counter Compare Registers) */
#define EPCMPR0 0x900
#define EPCMPR15 0x93C
#define EPCMPR31 0x97C
#define EPCMPR_STRIDE FSL_STRIDE_4B
/* EPCTR0-31 (Event Processor Counter Register) */
#define EPCTR0 0xA00
#define EPCTR31 0xA7C
#define EPCTR_STRIDE FSL_STRIDE_4B
void fsl_epu_clean(void *epu_base);
#endif

33
arch/arm/cpu/armv7/ls102xa/spl.c Normal file
View File

@ -0,0 +1,33 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
u32 spl_boot_device(void)
{
#ifdef CONFIG_SPL_MMC_SUPPORT
return BOOT_DEVICE_MMC1;
#endif
return BOOT_DEVICE_NAND;
}
u32 spl_boot_mode(void)
{
switch (spl_boot_device()) {
case BOOT_DEVICE_MMC1:
#ifdef CONFIG_SPL_FAT_SUPPORT
return MMCSD_MODE_FAT;
#else
return MMCSD_MODE_RAW;
#endif
case BOOT_DEVICE_NAND:
return 0;
default:
puts("spl: error: unsupported device\n");
hang();
}
}

7
arch/arm/cpu/armv7/nonsec_virt.S
View File

@ -169,11 +169,11 @@ ENTRY(_nonsec_init)
* we do this here instead.
* But first check if we have the generic timer.
*/
#ifdef CONFIG_SYS_CLK_FREQ
#ifdef CONFIG_TIMER_CLK_FREQ
mrc p15, 0, r0, c0, c1, 1 @ read ID_PFR1
and r0, r0, #CPUID_ARM_GENTIMER_MASK @ mask arch timer bits
cmp r0, #(1 << CPUID_ARM_GENTIMER_SHIFT)
ldreq r1, =CONFIG_SYS_CLK_FREQ
ldreq r1, =CONFIG_TIMER_CLK_FREQ
mcreq p15, 0, r1, c14, c0, 0 @ write CNTFRQ
#endif
@ -191,6 +191,9 @@ ENTRY(smp_waitloop)
wfi
ldr r1, =CONFIG_SMP_PEN_ADDR @ load start address
ldr r1, [r1]
#ifdef CONFIG_PEN_ADDR_BIG_ENDIAN
rev r1, r1
#endif
cmp r0, r1 @ make sure we dont execute this code
beq smp_waitloop @ again (due to a spurious wakeup)
mov r0, r1

3
arch/arm/cpu/u-boot-spl.lds
View File

@ -32,6 +32,9 @@ SECTIONS
}
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*_i2c_*)));
}
. = .;
#ifdef CONFIG_SPL_DM

9
arch/arm/include/asm/arch-ls102xa/config.h
View File

@ -11,11 +11,17 @@
#define OCRAM_BASE_ADDR 0x10000000
#define OCRAM_SIZE 0x00020000
#define OCRAM_BASE_S_ADDR 0x10010000
#define OCRAM_S_SIZE 0x00010000
#define CONFIG_SYS_IMMR 0x01000000
#define CONFIG_SYS_DCSRBAR 0x20000000
#define CONFIG_SYS_DCSR_DCFG_ADDR (CONFIG_SYS_DCSRBAR + 0x00220000)
#define CONFIG_SYS_FSL_DDR_ADDR (CONFIG_SYS_IMMR + 0x00080000)
#define CONFIG_SYS_CCI400_ADDR (CONFIG_SYS_IMMR + 0x00180000)
#define CONFIG_SYS_FSL_CSU_ADDR (CONFIG_SYS_IMMR + 0x00510000)
#define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x00530000)
#define CONFIG_SYS_FSL_ESDHC_ADDR (CONFIG_SYS_IMMR + 0x00560000)
#define CONFIG_SYS_FSL_SCFG_ADDR (CONFIG_SYS_IMMR + 0x00570000)
@ -52,6 +58,9 @@
#define LPUART_BASE (CONFIG_SYS_IMMR + 0x01950000)
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_IMMR + 0x2500000)
#ifdef CONFIG_DDR_SPD
#define CONFIG_SYS_FSL_DDR_BE
#define CONFIG_VERY_BIG_RAM

9
arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
View File

@ -17,6 +17,9 @@
#define SOC_VER_LS1021 0x11
#define SOC_VER_LS1022 0x12
#define CCSR_BRR_OFFSET 0xe4
#define CCSR_SCRATCHRW1_OFFSET 0x200
#define RCWSR0_SYS_PLL_RAT_SHIFT 25
#define RCWSR0_SYS_PLL_RAT_MASK 0x1f
#define RCWSR0_MEM_PLL_RAT_SHIFT 16
@ -29,6 +32,11 @@
#define ARCH_TIMER_CTRL_ENABLE (1 << 0)
#define SYS_COUNTER_CTRL_ENABLE (1 << 24)
#define DCFG_CCSR_PORSR1_RCW_MASK 0xff800000
#define DCFG_CCSR_PORSR1_RCW_SRC_I2C 0x24800000
#define DCFG_DCSR_PORCR1 0
struct sys_info {
unsigned long freq_processor[CONFIG_MAX_CPUS];
unsigned long freq_systembus;
@ -98,6 +106,7 @@ struct ccsr_gur {
#define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f
#define SCFG_ETSECCMCR_GE2_CLK125 0x04000000
#define SCFG_PIXCLKCR_PXCKEN 0x80000000
#define SCFG_QSPI_CLKSEL 0xc0100000
/* Supplemental Configuration Unit */
struct ccsr_scfg {

17
arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h Normal file
View File

@ -0,0 +1,17 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FSL_LS102XA_STREAM_ID_H_
#define __FSL_LS102XA_STREAM_ID_H_
struct smmu_stream_id {
uint16_t offset;
uint16_t stream_id;
char dev_name[32];
};
void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num);
#endif

118
arch/arm/include/asm/arch-ls102xa/ns_access.h Normal file
View File

@ -0,0 +1,118 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __FSL_NS_ACCESS_H_
#define __FSL_NS_ACCESS_H_
enum csu_cslx_access {
CSU_NS_SUP_R = 0x08,
CSU_NS_SUP_W = 0x80,
CSU_NS_SUP_RW = 0x88,
CSU_NS_USER_R = 0x04,
CSU_NS_USER_W = 0x40,
CSU_NS_USER_RW = 0x44,
CSU_S_SUP_R = 0x02,
CSU_S_SUP_W = 0x20,
CSU_S_SUP_RW = 0x22,
CSU_S_USER_R = 0x01,
CSU_S_USER_W = 0x10,
CSU_S_USER_RW = 0x11,
CSU_ALL_RW = 0xff,
};
enum csu_cslx_ind {
CSU_CSLX_PCIE2_IO = 0,
CSU_CSLX_PCIE1_IO,
CSU_CSLX_MG2TPR_IP,
CSU_CSLX_IFC_MEM,
CSU_CSLX_OCRAM,
CSU_CSLX_GIC,
CSU_CSLX_PCIE1,
CSU_CSLX_OCRAM2,
CSU_CSLX_QSPI_MEM,
CSU_CSLX_PCIE2,
CSU_CSLX_SATA,
CSU_CSLX_USB3,
CSU_CSLX_SERDES = 32,
CSU_CSLX_QDMA,
CSU_CSLX_LPUART2,
CSU_CSLX_LPUART1,
CSU_CSLX_LPUART4,
CSU_CSLX_LPUART3,
CSU_CSLX_LPUART6,
CSU_CSLX_LPUART5,
CSU_CSLX_DSPI2 = 40,
CSU_CSLX_DSPI1,
CSU_CSLX_QSPI,
CSU_CSLX_ESDHC,
CSU_CSLX_2D_ACE,
CSU_CSLX_IFC,
CSU_CSLX_I2C1,
CSU_CSLX_USB2,
CSU_CSLX_I2C3,
CSU_CSLX_I2C2,
CSU_CSLX_DUART2 = 50,
CSU_CSLX_DUART1,
CSU_CSLX_WDT2,
CSU_CSLX_WDT1,
CSU_CSLX_EDMA,
CSU_CSLX_SYS_CNT,
CSU_CSLX_DMA_MUX2,
CSU_CSLX_DMA_MUX1,
CSU_CSLX_DDR,
CSU_CSLX_QUICC,
CSU_CSLX_DCFG_CCU_RCPM = 60,
CSU_CSLX_SECURE_BOOTROM,
CSU_CSLX_SFP,
CSU_CSLX_TMU,
CSU_CSLX_SECURE_MONITOR,
CSU_CSLX_RESERVED0,
CSU_CSLX_ETSEC1,
CSU_CSLX_SEC5_5,
CSU_CSLX_ETSEC3,
CSU_CSLX_ETSEC2,
CSU_CSLX_GPIO2 = 70,
CSU_CSLX_GPIO1,
CSU_CSLX_GPIO4,
CSU_CSLX_GPIO3,
CSU_CSLX_PLATFORM_CONT,
CSU_CSLX_CSU,
CSU_CSLX_ASRC,
CSU_CSLX_SPDIF,
CSU_CSLX_FLEXCAN2,
CSU_CSLX_FLEXCAN1,
CSU_CSLX_FLEXCAN4 = 80,
CSU_CSLX_FLEXCAN3,
CSU_CSLX_SAI2,
CSU_CSLX_SAI1,
CSU_CSLX_SAI4,
CSU_CSLX_SAI3,
CSU_CSLX_FTM2,
CSU_CSLX_FTM1,
CSU_CSLX_FTM4,
CSU_CSLX_FTM3,
CSU_CSLX_FTM6 = 90,
CSU_CSLX_FTM5,
CSU_CSLX_FTM8,
CSU_CSLX_FTM7,
CSU_CSLX_COP_DCSR,
CSU_CSLX_EPU,
CSU_CSLX_GDI,
CSU_CSLX_DDI,
CSU_CSLX_RESERVED1,
CSU_CSLX_USB3_PHY = 117,
CSU_CSLX_RESERVED2,
CSU_CSLX_MAX,
};
struct csu_ns_dev {
unsigned long ind;
uint32_t val;
};
void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num);
#endif

20
arch/arm/include/asm/arch-ls102xa/spl.h Normal file
View File

@ -0,0 +1,20 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_ARCH_SPL_H__
#define __ASM_ARCH_SPL_H__
#define BOOT_DEVICE_NONE 0
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
#define BOOT_DEVICE_NAND 3
#define BOOT_DEVICE_ONENAND 4
#define BOOT_DEVICE_MMC1 5
#define BOOT_DEVICE_MMC2 6
#define BOOT_DEVICE_MMC2_2 7
#define BOOT_DEVICE_SPI 10
#endif /* __ASM_ARCH_SPL_H__ */

13
arch/arm/include/asm/pcie_layerscape.h Normal file
View File

@ -0,0 +1,13 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __PCIE_LAYERSCAPE_H_
#define __PCIE_LAYERSCAPE_H_
void pci_init_board(void);
void ft_pcie_setup(void *blob, bd_t *bd);
#endif

104
arch/powerpc/cpu/mpc8xxx/fdt.c
View File

@ -73,110 +73,6 @@ void ft_fixup_num_cores(void *blob) {
}
#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
const char *phy_type, int start_offset)
{
const char *compat_dr = "fsl-usb2-dr";
const char *compat_mph = "fsl-usb2-mph";
const char *prop_mode = "dr_mode";
const char *prop_type = "phy_type";
const char *node_type = NULL;
int node_offset;
int err;
node_offset = fdt_node_offset_by_compatible(blob,
start_offset, compat_mph);
if (node_offset < 0) {
node_offset = fdt_node_offset_by_compatible(blob,
start_offset, compat_dr);
if (node_offset < 0) {
printf("WARNING: could not find compatible"
" node %s or %s: %s.\n", compat_mph,
compat_dr, fdt_strerror(node_offset));
return -1;
} else
node_type = compat_dr;
} else
node_type = compat_mph;
if (mode) {
err = fdt_setprop(blob, node_offset, prop_mode, mode,
strlen(mode) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
prop_mode, node_type, fdt_strerror(err));
}
if (phy_type) {
err = fdt_setprop(blob, node_offset, prop_type, phy_type,
strlen(phy_type) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
prop_type, node_type, fdt_strerror(err));
}
return node_offset;
}
void fdt_fixup_dr_usb(void *blob, bd_t *bd)
{
const char *modes[] = { "host", "peripheral", "otg" };
const char *phys[] = { "ulpi", "utmi" };
int usb_mode_off = -1;
int usb_phy_off = -1;
char str[5];
int i, j;
for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
const char *dr_mode_type = NULL;
const char *dr_phy_type = NULL;
int mode_idx = -1, phy_idx = -1;
snprintf(str, 5, "%s%d", "usb", i);
if (hwconfig(str)) {
for (j = 0; j < ARRAY_SIZE(modes); j++) {
if (hwconfig_subarg_cmp(str, "dr_mode",
modes[j])) {
mode_idx = j;
break;
}
}
for (j = 0; j < ARRAY_SIZE(phys); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
phy_idx = j;
break;
}
}
if (mode_idx < 0 && phy_idx < 0) {
printf("WARNING: invalid phy or mode\n");
return;
}
if (mode_idx > -1)
dr_mode_type = modes[mode_idx];
if (phy_idx > -1)
dr_phy_type = phys[phy_idx];
}
usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
dr_mode_type, NULL, usb_mode_off);
if (usb_mode_off < 0)
return;
usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
NULL, dr_phy_type, usb_phy_off);
if (usb_phy_off < 0)
return;
}
}
#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
/*
* update crypto node properties to a specified revision of the SEC
* called with sec_rev == 0 if not on an E processor

10
board/freescale/common/Makefile
View File

@ -37,6 +37,12 @@ endif
obj-$(CONFIG_FSL_DIU_CH7301) += diu_ch7301.o
ifdef CONFIG_ARM
obj-$(CONFIG_DEEP_SLEEP) += arm_sleep.o
else
obj-$(CONFIG_DEEP_SLEEP) += mpc85xx_sleep.o
endif
obj-$(CONFIG_FSL_DCU_SII9022A) += dcu_sii9022a.o
obj-$(CONFIG_MPC8541CDS) += cds_pci_ft.o
@ -56,10 +62,14 @@ obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o
obj-$(CONFIG_ZM7300) += zm7300.o
obj-$(CONFIG_POWER_PFUZE100) += pfuze.o
obj-$(CONFIG_LS102XA_STREAM_ID) += ls102xa_stream_id.o
# deal with common files for P-series corenet based devices
obj-$(CONFIG_P2041RDB) += p_corenet/
obj-$(CONFIG_P3041DS) += p_corenet/
obj-$(CONFIG_P4080DS) += p_corenet/
obj-$(CONFIG_P5020DS) += p_corenet/
obj-$(CONFIG_P5040DS) += p_corenet/
obj-$(CONFIG_LS102XA_NS_ACCESS) += ns_access.o
endif

95
board/freescale/common/arm_sleep.c Normal file
View File

@ -0,0 +1,95 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#if !defined(CONFIG_ARMV7_NONSEC) || !defined(CONFIG_ARMV7_VIRT)
#error " Deep sleep needs non-secure mode support. "
#else
#include <asm/secure.h>
#endif
#include <asm/armv7.h>
#include <asm/cache.h>
#if defined(CONFIG_LS102XA)
#include <asm/arch/immap_ls102xa.h>
#endif
#include "sleep.h"
DECLARE_GLOBAL_DATA_PTR;
void __weak board_mem_sleep_setup(void)
{
}
void __weak board_sleep_prepare(void)
{
}
bool is_warm_boot(void)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
return 1;
return 0;
}
void fsl_dp_disable_console(void)
{
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
}
/*
* When wakeup from deep sleep, the first 128 bytes space
* will be used to do DDR training which corrupts the data
* in there. This function will restore them.
*/
static void dp_ddr_restore(void)
{
u64 *src, *dst;
int i;
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
/* get the address of ddr date from SPARECR3 */
src = (u64 *)in_le32(&scfg->sparecr[2]);
dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
for (i = 0; i < DDR_BUFF_LEN / 8; i++)
*dst++ = *src++;
flush_dcache_all();
}
static void dp_resume_prepare(void)
{
dp_ddr_restore();
board_sleep_prepare();
armv7_init_nonsec();
cleanup_before_linux();
}
int fsl_dp_resume(void)
{
u32 start_addr;
void (*kernel_resume)(void);
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR;
if (!is_warm_boot())
return 0;
dp_resume_prepare();
/* Get the entry address and jump to kernel */
start_addr = in_le32(&scfg->sparecr[1]);
debug("Entry address is 0x%08x\n", start_addr);
kernel_resume = (void (*)(void))start_addr;
secure_ram_addr(_do_nonsec_entry)(kernel_resume, 0, 0, 0);
return 0;
}

18
board/freescale/common/ls102xa_stream_id.c Normal file
View File

@ -0,0 +1,18 @@
/*
* Copyright 2014 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/ls102xa_stream_id.h>
void ls102xa_config_smmu_stream_id(struct smmu_stream_id *id, uint32_t num)
{
uint32_t *scfg = (uint32_t *)CONFIG_SYS_FSL_SCFG_ADDR;
int i;
for (i = 0; i < num; i++)
out_be32(scfg + id[i].offset, id[i].stream_id);
}

88
board/freescale/common/mpc85xx_sleep.c Normal file
View File

@ -0,0 +1,88 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/immap_85xx.h>
#include "sleep.h"
DECLARE_GLOBAL_DATA_PTR;
void __weak board_mem_sleep_setup(void)
{
}
void __weak board_sleep_prepare(void)
{
}
bool is_warm_boot(void)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
if (in_be32(&gur->scrtsr[0]) & DCFG_CCSR_CRSTSR_WDRFR)
return 1;
return 0;
}
void fsl_dp_disable_console(void)
{
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
}
/*
* When wakeup from deep sleep, the first 128 bytes space
* will be used to do DDR training which corrupts the data
* in there. This function will restore them.
*/
static void dp_ddr_restore(void)
{
volatile u64 *src, *dst;
int i;
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
/* get the address of ddr date from SPARECR3 */
src = (u64 *)in_be32(&scfg->sparecr[2]);
dst = (u64 *)CONFIG_SYS_SDRAM_BASE;
for (i = 0; i < DDR_BUFF_LEN / 8; i++)
*dst++ = *src++;
flush_dcache();
}
static void dp_resume_prepare(void)
{
dp_ddr_restore();
board_sleep_prepare();
l2cache_init();
#if defined(CONFIG_RAMBOOT_PBL)
disable_cpc_sram();
#endif
enable_cpc();
}
int fsl_dp_resume(void)
{
u32 start_addr;
void (*kernel_resume)(void);
struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG;
if (!is_warm_boot())
return 0;
dp_resume_prepare();
/* Get the entry address and jump to kernel */
start_addr = in_be32(&scfg->sparecr[1]);
debug("Entry address is 0x%08x\n", start_addr);
kernel_resume = (void (*)(void))start_addr;
kernel_resume();
return 0;
}

30
board/freescale/common/ns_access.c Normal file
View File

@ -0,0 +1,30 @@
/*
* Copyright 2014 Freescale Semiconductor
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/ns_access.h>
void enable_devices_ns_access(struct csu_ns_dev *ns_dev, uint32_t num)
{
u32 *base = (u32 *)CONFIG_SYS_FSL_CSU_ADDR;
u32 *reg;
uint32_t val;
int i;
for (i = 0; i < num; i++) {
reg = base + ns_dev[i].ind / 2;
val = in_be32(reg);
if (ns_dev[i].ind % 2 == 0) {
val &= 0x0000ffff;
val |= ns_dev[i].val << 16;
} else {
val &= 0xffff0000;
val |= ns_dev[i].val;
}
out_be32(reg, val);
}
}

7
board/freescale/common/qixis.h
View File

@ -100,8 +100,15 @@ u8 qixis_read_i2c(unsigned int reg);
void qixis_write_i2c(unsigned int reg, u8 value);
#endif
#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
#define QIXIS_WRITE(reg, value) \
qixis_write_i2c(offsetof(struct qixis, reg), value)
#else
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
#endif
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
#define QIXIS_WRITE_I2C(reg, value) \

21
board/freescale/common/sleep.h Normal file
View File

@ -0,0 +1,21 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SLEEP_H
#define __SLEEP_H
#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
#define DDR_BUFF_LEN 128
/* determine if it is a wakeup from deep sleep */
bool is_warm_boot(void);
/* disable console output */
void fsl_dp_disable_console(void);
/* clean up everything and jump to kernel */
int fsl_dp_resume(void);
#endif

3
board/freescale/ls1021aqds/MAINTAINERS
View File

@ -6,3 +6,6 @@ F: include/configs/ls1021aqds.h
F: configs/ls1021aqds_nor_defconfig
F: configs/ls1021aqds_ddr4_nor_defconfig
F: configs/ls1021aqds_nor_SECURE_BOOT_defconfig
F: configs/ls1021aqds_sdcard_defconfig
F: configs/ls1021aqds_qspi_defconfig
F: configs/ls1021aqds_nand_defconfig

5
board/freescale/ls1021aqds/ddr.c
View File

@ -153,9 +153,12 @@ phys_size_t initdram(int board_type)
{
phys_size_t dram_size;
#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_SPL)
puts("Initializing DDR....using SPD\n");
dram_size = fsl_ddr_sdram();
#else
dram_size = fsl_ddr_sdram_size();
#endif
return dram_size;
}

283
board/freescale/ls1021aqds/ls1021aqds.c
View File

@ -8,12 +8,17 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/ls102xa_stream_id.h>
#include <asm/pcie_layerscape.h>
#include <hwconfig.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
#include <fsl_sec.h>
#include <spl.h>
#include "../common/qixis.h"
#include "ls1021aqds_qixis.h"
@ -21,9 +26,22 @@
#include "../../../drivers/qe/qe.h"
#endif
#define PIN_MUX_SEL_CAN 0x03
#define PIN_MUX_SEL_IIC2 0xa0
#define PIN_MUX_SEL_RGMII 0x00
#define PIN_MUX_SEL_SAI 0x0c
#define PIN_MUX_SEL_SDHC 0x00
#define SET_SDHC_MUX_SEL(reg, value) ((reg & 0x0f) | value)
#define SET_EC_MUX_SEL(reg, value) ((reg & 0xf0) | value)
DECLARE_GLOBAL_DATA_PTR;
enum {
MUX_TYPE_CAN,
MUX_TYPE_IIC2,
MUX_TYPE_RGMII,
MUX_TYPE_SAI,
MUX_TYPE_SDHC,
MUX_TYPE_SD_PCI4,
MUX_TYPE_SD_PC_SA_SG_SG,
MUX_TYPE_SD_PC_SA_PC_SG,
@ -32,11 +50,20 @@ enum {
int checkboard(void)
{
#ifndef CONFIG_QSPI_BOOT
char buf[64];
#endif
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
u8 sw;
#endif
puts("Board: LS1021AQDS\n");
#ifdef CONFIG_SD_BOOT
puts("SD\n");
#elif CONFIG_QSPI_BOOT
puts("QSPI\n");
#else
sw = QIXIS_READ(brdcfg[0]);
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
@ -50,13 +77,16 @@ int checkboard(void)
printf("IFCCard\n");
else
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
#endif
#ifndef CONFIG_QSPI_BOOT
printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
QIXIS_READ(id), QIXIS_READ(arch));
printf("FPGA: v%d (%s), build %d\n",
(int)QIXIS_READ(scver), qixis_read_tag(buf),
(int)qixis_read_minor());
#endif
return 0;
}
@ -101,8 +131,27 @@ unsigned long get_board_ddr_clk(void)
return 66666666;
}
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
}
return 0;
}
int dram_init(void)
{
/*
* When resuming from deep sleep, the I2C channel may not be
* in the default channel. So, switch to the default channel
* before accessing DDR SPD.
*/
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
gd->ram_size = initdram(0);
return 0;
@ -121,19 +170,6 @@ int board_mmc_init(bd_t *bis)
}
#endif
int select_i2c_ch_pca9547(u8 ch)
{
int ret;
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
if (ret) {
puts("PCA: failed to select proper channel\n");
return ret;
}
return 0;
}
int board_early_init_f(void)
{
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
@ -148,6 +184,10 @@ int board_early_init_f(void)
init_early_memctl_regs();
#endif
#ifdef CONFIG_FSL_QSPI
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
/* Workaround for the issue that DDR could not respond to
* barrier transaction which is generated by executing DSB/ISB
* instruction. Set CCI-400 control override register to
@ -158,13 +198,75 @@ int board_early_init_f(void)
return 0;
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
#ifdef CONFIG_NAND_BOOT
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
u32 porsr1, pinctl;
/*
* There is LS1 SoC issue where NOR, FPGA are inaccessible during
* NAND boot because IFC signals > IFC_AD7 are not enabled.
* This workaround changes RCW source to make all signals enabled.
*/
porsr1 = in_be32(&gur->porsr1);
pinctl = ((porsr1 & ~(DCFG_CCSR_PORSR1_RCW_MASK)) |
DCFG_CCSR_PORSR1_RCW_SRC_I2C);
out_be32((unsigned int *)(CONFIG_SYS_DCSR_DCFG_ADDR + DCFG_DCSR_PORCR1),
pinctl);
#endif
/* Set global data pointer */
gd = &gdata;
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
#ifdef CONFIG_FSL_IFC
init_early_memctl_regs();
#endif
get_clocks();
preloader_console_init();
#ifdef CONFIG_SPL_I2C_SUPPORT
i2c_init_all();
#endif
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
dram_init();
board_init_r(NULL, 0);
}
#endif
int config_board_mux(int ctrl_type)
{
u8 reg12;
u8 reg12, reg14;
reg12 = QIXIS_READ(brdcfg[12]);
reg14 = QIXIS_READ(brdcfg[14]);
switch (ctrl_type) {
case MUX_TYPE_CAN:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_CAN);
break;
case MUX_TYPE_IIC2:
reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_IIC2);
break;
case MUX_TYPE_RGMII:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_RGMII);
break;
case MUX_TYPE_SAI:
reg14 = SET_EC_MUX_SEL(reg14, PIN_MUX_SEL_SAI);
break;
case MUX_TYPE_SDHC:
reg14 = SET_SDHC_MUX_SEL(reg14, PIN_MUX_SEL_SDHC);
break;
case MUX_TYPE_SD_PCI4:
reg12 = 0x38;
break;
@ -183,6 +285,7 @@ int config_board_mux(int ctrl_type)
}
QIXIS_WRITE(brdcfg[12], reg12);
QIXIS_WRITE(brdcfg[14], reg14);
return 0;
}
@ -216,15 +319,154 @@ int config_serdes_mux(void)
return 0;
}
#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
int conflict_flag;
/* some signals can not enable simultaneous*/
conflict_flag = 0;
if (hwconfig("sdhc"))
conflict_flag++;
if (hwconfig("iic2"))
conflict_flag++;
if (conflict_flag > 1) {
printf("WARNING: pin conflict !\n");
return 0;
}
conflict_flag = 0;
if (hwconfig("rgmii"))
conflict_flag++;
if (hwconfig("can"))
conflict_flag++;
if (hwconfig("sai"))
conflict_flag++;
if (conflict_flag > 1) {
printf("WARNING: pin conflict !\n");
return 0;
}
if (hwconfig("can"))
config_board_mux(MUX_TYPE_CAN);
else if (hwconfig("rgmii"))
config_board_mux(MUX_TYPE_RGMII);
else if (hwconfig("sai"))
config_board_mux(MUX_TYPE_SAI);
if (hwconfig("iic2"))
config_board_mux(MUX_TYPE_IIC2);
else if (hwconfig("sdhc"))
config_board_mux(MUX_TYPE_SDHC);
#ifdef CONFIG_FSL_CAAM
return sec_init();
#endif
return 0;
}
#ifdef CONFIG_LS102XA_NS_ACCESS
static struct csu_ns_dev ns_dev[] = {
{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
{ CSU_CSLX_OCRAM, CSU_ALL_RW },
{ CSU_CSLX_GIC, CSU_ALL_RW },
{ CSU_CSLX_PCIE1, CSU_ALL_RW },
{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
{ CSU_CSLX_PCIE2, CSU_ALL_RW },
{ CSU_CSLX_SATA, CSU_ALL_RW },
{ CSU_CSLX_USB3, CSU_ALL_RW },
{ CSU_CSLX_SERDES, CSU_ALL_RW },
{ CSU_CSLX_QDMA, CSU_ALL_RW },
{ CSU_CSLX_LPUART2, CSU_ALL_RW },
{ CSU_CSLX_LPUART1, CSU_ALL_RW },
{ CSU_CSLX_LPUART4, CSU_ALL_RW },
{ CSU_CSLX_LPUART3, CSU_ALL_RW },
{ CSU_CSLX_LPUART6, CSU_ALL_RW },
{ CSU_CSLX_LPUART5, CSU_ALL_RW },
{ CSU_CSLX_DSPI2, CSU_ALL_RW },
{ CSU_CSLX_DSPI1, CSU_ALL_RW },
{ CSU_CSLX_QSPI, CSU_ALL_RW },
{ CSU_CSLX_ESDHC, CSU_ALL_RW },
{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
{ CSU_CSLX_IFC, CSU_ALL_RW },
{ CSU_CSLX_I2C1, CSU_ALL_RW },
{ CSU_CSLX_USB2, CSU_ALL_RW },
{ CSU_CSLX_I2C3, CSU_ALL_RW },
{ CSU_CSLX_I2C2, CSU_ALL_RW },
{ CSU_CSLX_DUART2, CSU_ALL_RW },
{ CSU_CSLX_DUART1, CSU_ALL_RW },
{ CSU_CSLX_WDT2, CSU_ALL_RW },
{ CSU_CSLX_WDT1, CSU_ALL_RW },
{ CSU_CSLX_EDMA, CSU_ALL_RW },
{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
{ CSU_CSLX_DDR, CSU_ALL_RW },
{ CSU_CSLX_QUICC, CSU_ALL_RW },
{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
{ CSU_CSLX_SFP, CSU_ALL_RW },
{ CSU_CSLX_TMU, CSU_ALL_RW },
{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
{ CSU_CSLX_GPIO2, CSU_ALL_RW },
{ CSU_CSLX_GPIO1, CSU_ALL_RW },
{ CSU_CSLX_GPIO4, CSU_ALL_RW },
{ CSU_CSLX_GPIO3, CSU_ALL_RW },
{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
{ CSU_CSLX_CSU, CSU_ALL_RW },
{ CSU_CSLX_ASRC, CSU_ALL_RW },
{ CSU_CSLX_SPDIF, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
{ CSU_CSLX_SAI2, CSU_ALL_RW },
{ CSU_CSLX_SAI1, CSU_ALL_RW },
{ CSU_CSLX_SAI4, CSU_ALL_RW },
{ CSU_CSLX_SAI3, CSU_ALL_RW },
{ CSU_CSLX_FTM2, CSU_ALL_RW },
{ CSU_CSLX_FTM1, CSU_ALL_RW },
{ CSU_CSLX_FTM4, CSU_ALL_RW },
{ CSU_CSLX_FTM3, CSU_ALL_RW },
{ CSU_CSLX_FTM6, CSU_ALL_RW },
{ CSU_CSLX_FTM5, CSU_ALL_RW },
{ CSU_CSLX_FTM8, CSU_ALL_RW },
{ CSU_CSLX_FTM7, CSU_ALL_RW },
{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
{ CSU_CSLX_EPU, CSU_ALL_RW },
{ CSU_CSLX_GDI, CSU_ALL_RW },
{ CSU_CSLX_DDI, CSU_ALL_RW },
{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
};
#endif
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
{ 0x108, 0x03, "ETSEC MAC3" },
{ 0x10c, 0x04, "PEX1" },
{ 0x110, 0x05, "PEX2" },
{ 0x114, 0x06, "qDMA" },
{ 0x118, 0x07, "SATA" },
{ 0x11c, 0x08, "USB3" },
{ 0x120, 0x09, "QE" },
{ 0x124, 0x0a, "eSDHC" },
{ 0x128, 0x0b, "eMA" },
{ 0x14c, 0x0c, "2D-ACE" },
{ 0x150, 0x0d, "USB2" },
{ 0x18c, 0x0e, "DEBUG" },
};
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@ -247,6 +489,13 @@ int board_init(void)
config_serdes_mux();
#endif
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));
#ifdef CONFIG_LS102XA_NS_ACCESS
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
#endif
#ifdef CONFIG_U_QE
u_qe_init();
#endif
@ -258,6 +507,10 @@ int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCIE_LAYERSCAPE
ft_pcie_setup(blob, bd);
#endif
return 0;
}

12
board/freescale/ls1021aqds/ls102xa_pbi.cfg Normal file
View File

@ -0,0 +1,12 @@
#PBI commands
09570200 ffffffff
09570158 00000300
8940007c 21f47300
#Configure Scratch register
09ee0200 10000000
#Configure alternate space
09570158 00001000
#Flush PBL data
096100c0 000FFFFF

7
board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg Normal file
View File

@ -0,0 +1,7 @@
#PBL preamble and RCW header
aa55aa55 01ee0100
# serdes protocol
0608000a 00000000 00000000 00000000
60000000 00407900 e0106a00 21046000
00000000 00000000 00000000 00038000
00000000 001b7200 00000000 00000000

14
board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg Normal file
View File

@ -0,0 +1,14 @@
#PBL preamble and RCW header
aa55aa55 01ee0100
#enable IFC, disable QSPI and DSPI
0608000a 00000000 00000000 00000000
60000000 00407900 60040a00 21046000
00000000 00000000 00000000 00038000
00000000 001b7200 00000000 00000000
#disable IFC, enable QSPI and DSPI
#0608000a 00000000 00000000 00000000
#60000000 00407900 60040a00 21046000
#00000000 00000000 00000000 00038000
#20024800 001b7200 00000000 00000000

2
board/freescale/ls1021atwr/MAINTAINERS
View File

@ -5,3 +5,5 @@ F: board/freescale/ls1021atwr/
F: include/configs/ls1021atwr.h
F: configs/ls1021atwr_nor_defconfig
F: configs/ls1021atwr_nor_SECURE_BOOT_defconfig
F: configs/ls1021atwr_sdcard_defconfig
F: configs/ls1021atwr_qspi_defconfig

151
board/freescale/ls1021atwr/ls1021atwr.c
View File

@ -8,8 +8,11 @@
#include <i2c.h>
#include <asm/io.h>
#include <asm/arch/immap_ls102xa.h>
#include <asm/arch/ns_access.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/ls102xa_stream_id.h>
#include <asm/pcie_layerscape.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
@ -17,6 +20,7 @@
#include <fsl_mdio.h>
#include <tsec.h>
#include <fsl_sec.h>
#include <spl.h>
#ifdef CONFIG_U_QE
#include "../../../drivers/qe/qe.h"
#endif
@ -70,6 +74,7 @@ struct cpld_data {
u8 rev2; /* Reserved */
};
#ifndef CONFIG_QSPI_BOOT
static void convert_serdes_mux(int type, int need_reset);
void cpld_show(void)
@ -105,11 +110,14 @@ void cpld_show(void)
in_8(&cpld_data->serdes_mux));
#endif
}
#endif
int checkboard(void)
{
puts("Board: LS1021ATWR\n");
#ifndef CONFIG_QSPI_BOOT
cpld_show();
#endif
return 0;
}
@ -218,6 +226,7 @@ int board_eth_init(bd_t *bis)
}
#endif
#ifndef CONFIG_QSPI_BOOT
int config_serdes_mux(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@ -249,6 +258,7 @@ int config_serdes_mux(void)
return 0;
}
#endif
int board_early_init_f(void)
{
@ -267,9 +277,135 @@ int board_early_init_f(void)
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
#endif
#ifdef CONFIG_FSL_QSPI
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
#endif
return 0;
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
/* Set global data pointer */
gd = &gdata;
/* Clear the BSS */
memset(__bss_start, 0, __bss_end - __bss_start);
get_clocks();
preloader_console_init();
dram_init();
board_init_r(NULL, 0);
}
#endif
#ifdef CONFIG_LS102XA_NS_ACCESS
static struct csu_ns_dev ns_dev[] = {
{ CSU_CSLX_PCIE2_IO, CSU_ALL_RW },
{ CSU_CSLX_PCIE1_IO, CSU_ALL_RW },
{ CSU_CSLX_MG2TPR_IP, CSU_ALL_RW },
{ CSU_CSLX_IFC_MEM, CSU_ALL_RW },
{ CSU_CSLX_OCRAM, CSU_ALL_RW },
{ CSU_CSLX_GIC, CSU_ALL_RW },
{ CSU_CSLX_PCIE1, CSU_ALL_RW },
{ CSU_CSLX_OCRAM2, CSU_ALL_RW },
{ CSU_CSLX_QSPI_MEM, CSU_ALL_RW },
{ CSU_CSLX_PCIE2, CSU_ALL_RW },
{ CSU_CSLX_SATA, CSU_ALL_RW },
{ CSU_CSLX_USB3, CSU_ALL_RW },
{ CSU_CSLX_SERDES, CSU_ALL_RW },
{ CSU_CSLX_QDMA, CSU_ALL_RW },
{ CSU_CSLX_LPUART2, CSU_ALL_RW },
{ CSU_CSLX_LPUART1, CSU_ALL_RW },
{ CSU_CSLX_LPUART4, CSU_ALL_RW },
{ CSU_CSLX_LPUART3, CSU_ALL_RW },
{ CSU_CSLX_LPUART6, CSU_ALL_RW },
{ CSU_CSLX_LPUART5, CSU_ALL_RW },
{ CSU_CSLX_DSPI2, CSU_ALL_RW },
{ CSU_CSLX_DSPI1, CSU_ALL_RW },
{ CSU_CSLX_QSPI, CSU_ALL_RW },
{ CSU_CSLX_ESDHC, CSU_ALL_RW },
{ CSU_CSLX_2D_ACE, CSU_ALL_RW },
{ CSU_CSLX_IFC, CSU_ALL_RW },
{ CSU_CSLX_I2C1, CSU_ALL_RW },
{ CSU_CSLX_USB2, CSU_ALL_RW },
{ CSU_CSLX_I2C3, CSU_ALL_RW },
{ CSU_CSLX_I2C2, CSU_ALL_RW },
{ CSU_CSLX_DUART2, CSU_ALL_RW },
{ CSU_CSLX_DUART1, CSU_ALL_RW },
{ CSU_CSLX_WDT2, CSU_ALL_RW },
{ CSU_CSLX_WDT1, CSU_ALL_RW },
{ CSU_CSLX_EDMA, CSU_ALL_RW },
{ CSU_CSLX_SYS_CNT, CSU_ALL_RW },
{ CSU_CSLX_DMA_MUX2, CSU_ALL_RW },
{ CSU_CSLX_DMA_MUX1, CSU_ALL_RW },
{ CSU_CSLX_DDR, CSU_ALL_RW },
{ CSU_CSLX_QUICC, CSU_ALL_RW },
{ CSU_CSLX_DCFG_CCU_RCPM, CSU_ALL_RW },
{ CSU_CSLX_SECURE_BOOTROM, CSU_ALL_RW },
{ CSU_CSLX_SFP, CSU_ALL_RW },
{ CSU_CSLX_TMU, CSU_ALL_RW },
{ CSU_CSLX_SECURE_MONITOR, CSU_ALL_RW },
{ CSU_CSLX_RESERVED0, CSU_ALL_RW },
{ CSU_CSLX_ETSEC1, CSU_ALL_RW },
{ CSU_CSLX_SEC5_5, CSU_ALL_RW },
{ CSU_CSLX_ETSEC3, CSU_ALL_RW },
{ CSU_CSLX_ETSEC2, CSU_ALL_RW },
{ CSU_CSLX_GPIO2, CSU_ALL_RW },
{ CSU_CSLX_GPIO1, CSU_ALL_RW },
{ CSU_CSLX_GPIO4, CSU_ALL_RW },
{ CSU_CSLX_GPIO3, CSU_ALL_RW },
{ CSU_CSLX_PLATFORM_CONT, CSU_ALL_RW },
{ CSU_CSLX_CSU, CSU_ALL_RW },
{ CSU_CSLX_ASRC, CSU_ALL_RW },
{ CSU_CSLX_SPDIF, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN2, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN1, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN4, CSU_ALL_RW },
{ CSU_CSLX_FLEXCAN3, CSU_ALL_RW },
{ CSU_CSLX_SAI2, CSU_ALL_RW },
{ CSU_CSLX_SAI1, CSU_ALL_RW },
{ CSU_CSLX_SAI4, CSU_ALL_RW },
{ CSU_CSLX_SAI3, CSU_ALL_RW },
{ CSU_CSLX_FTM2, CSU_ALL_RW },
{ CSU_CSLX_FTM1, CSU_ALL_RW },
{ CSU_CSLX_FTM4, CSU_ALL_RW },
{ CSU_CSLX_FTM3, CSU_ALL_RW },
{ CSU_CSLX_FTM6, CSU_ALL_RW },
{ CSU_CSLX_FTM5, CSU_ALL_RW },
{ CSU_CSLX_FTM8, CSU_ALL_RW },
{ CSU_CSLX_FTM7, CSU_ALL_RW },
{ CSU_CSLX_COP_DCSR, CSU_ALL_RW },
{ CSU_CSLX_EPU, CSU_ALL_RW },
{ CSU_CSLX_GDI, CSU_ALL_RW },
{ CSU_CSLX_DDI, CSU_ALL_RW },
{ CSU_CSLX_RESERVED1, CSU_ALL_RW },
{ CSU_CSLX_USB3_PHY, CSU_ALL_RW },
{ CSU_CSLX_RESERVED2, CSU_ALL_RW },
};
#endif
struct smmu_stream_id dev_stream_id[] = {
{ 0x100, 0x01, "ETSEC MAC1" },
{ 0x104, 0x02, "ETSEC MAC2" },
{ 0x108, 0x03, "ETSEC MAC3" },
{ 0x10c, 0x04, "PEX1" },
{ 0x110, 0x05, "PEX2" },
{ 0x114, 0x06, "qDMA" },
{ 0x118, 0x07, "SATA" },
{ 0x11c, 0x08, "USB3" },
{ 0x120, 0x09, "QE" },
{ 0x124, 0x0a, "eSDHC" },
{ 0x128, 0x0b, "eMA" },
{ 0x14c, 0x0c, "2D-ACE" },
{ 0x150, 0x0d, "USB2" },
{ 0x18c, 0x0e, "DEBUG" },
};
int board_init(void)
{
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
@ -284,8 +420,17 @@ int board_init(void)
#ifndef CONFIG_SYS_FSL_NO_SERDES
fsl_serdes_init();
#ifndef CONFIG_QSPI_BOOT
config_serdes_mux();
#endif
#endif
ls102xa_config_smmu_stream_id(dev_stream_id,
ARRAY_SIZE(dev_stream_id));
#ifdef CONFIG_LS102XA_NS_ACCESS
enable_devices_ns_access(ns_dev, ARRAY_SIZE(ns_dev));
#endif
#ifdef CONFIG_U_QE
u_qe_init();
@ -307,6 +452,10 @@ int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCIE_LAYERSCAPE
ft_pcie_setup(blob, bd);
#endif
return 0;
}
@ -329,6 +478,7 @@ u16 flash_read16(void *addr)
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
}
#ifndef CONFIG_QSPI_BOOT
static void convert_flash_bank(char bank)
{
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@ -511,3 +661,4 @@ U_BOOT_CMD(
" -change lane C & lane D to PCIeX2\n"
"\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
);
#endif

12
board/freescale/ls1021atwr/ls102xa_pbi.cfg Normal file
View File

@ -0,0 +1,12 @@
#PBI commands
09570200 ffffffff
09570158 00000300
8940007c 21f47300
#Configure Scratch register
09ee0200 10000000
#Configure alternate space
09570158 00001000
#Flush PBL data
096100c0 000FFFFF

14
board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg Normal file
View File

@ -0,0 +1,14 @@
#PBL preamble and RCW header
aa55aa55 01ee0100
#enable IFC, disable QSPI and DSPI
0608000a 00000000 00000000 00000000
20000000 00407900 60040a00 21046000
00000000 00000000 00000000 00038000
00080000 881b7340 00000000 00000000
#disable IFC, enable QSPI and DSPI
#0608000a 00000000 00000000 00000000
#20000000 00407900 60040a00 21046000
#00000000 00000000 00000000 00038000
#20084800 881b7340 00000000 00000000

4
configs/ls1021aqds_nand_defconfig Normal file
View File

@ -0,0 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_LS1021AQDS=y

3
configs/ls1021aqds_qspi_defconfig Normal file
View File

@ -0,0 +1,3 @@
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_LS1021AQDS=y

4
configs/ls1021aqds_sdcard_defconfig Normal file
View File

@ -0,0 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_LS1021AQDS=y

3
configs/ls1021atwr_qspi_defconfig Normal file
View File

@ -0,0 +1,3 @@
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_LS1021ATWR=y

4
configs/ls1021atwr_sdcard_defconfig Normal file
View File

@ -0,0 +1,4 @@
CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_LS1021ATWR=y

45
drivers/ddr/fsl/arm_ddr_gen3.c
View File

@ -92,7 +92,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->timing_cfg_0, regs->timing_cfg_0);
ddr_out32(&ddr->timing_cfg_1, regs->timing_cfg_1);
ddr_out32(&ddr->timing_cfg_2, regs->timing_cfg_2);
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
ddr_out32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@ -105,9 +104,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
ddr_out32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
ddr_out32(&ddr->timing_cfg_4, regs->timing_cfg_4);
ddr_out32(&ddr->timing_cfg_5, regs->timing_cfg_5);
ddr_out32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@ -128,7 +124,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
ddr_out32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
ddr_out32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
/* DRAM VRef will not be trained */
ddr_out32(&ddr->ddr_cdr2,
regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
} else
#endif
{
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
}
ddr_out32(&ddr->err_disable, regs->err_disable);
ddr_out32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@ -167,8 +180,20 @@ step2:
udelay(500);
asm volatile("dsb sy;isb");
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* enter self-refresh */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
/* do board specific memory setup */
board_mem_sleep_setup();
temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
} else
#endif
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
/* Let the controller go */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("dsb sy;isb");
@ -211,4 +236,12 @@ step2:
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* exit self-refresh */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
}
#endif
}

44
drivers/ddr/fsl/fsl_ddr_gen4.c
View File

@ -103,7 +103,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->dq_map_1, regs->dq_map_1);
ddr_out32(&ddr->dq_map_2, regs->dq_map_2);
ddr_out32(&ddr->dq_map_3, regs->dq_map_3);
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->sdram_cfg_3, regs->ddr_sdram_cfg_3);
ddr_out32(&ddr->sdram_mode, regs->ddr_sdram_mode);
ddr_out32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
@ -124,8 +123,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
ddr_out32(&ddr->sdram_interval, regs->ddr_sdram_interval);
ddr_out32(&ddr->sdram_data_init, regs->ddr_data_init);
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
ddr_out32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
#ifndef CONFIG_SYS_FSL_DDR_EMU
/*
@ -147,7 +144,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
ddr_out32(&ddr->ddr_sdram_rcw_5, regs->ddr_sdram_rcw_5);
ddr_out32(&ddr->ddr_sdram_rcw_6, regs->ddr_sdram_rcw_6);
ddr_out32(&ddr->ddr_cdr1, regs->ddr_cdr1);
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
ddr_out32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
ddr_out32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
ddr_out32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
/* DRAM VRef will not be trained */
ddr_out32(&ddr->ddr_cdr2,
regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
} else
#endif
{
ddr_out32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
ddr_out32(&ddr->init_addr, regs->ddr_init_addr);
ddr_out32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
ddr_out32(&ddr->ddr_cdr2, regs->ddr_cdr2);
}
ddr_out32(&ddr->err_disable, regs->err_disable);
ddr_out32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@ -187,8 +201,20 @@ step2:
mb();
isb();
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* enter self-refresh */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
temp_sdram_cfg |= SDRAM_CFG2_FRC_SR;
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
/* do board specific memory setup */
board_mem_sleep_setup();
temp_sdram_cfg = (ddr_in32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
} else
#endif
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
/* Let the controller go */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
ddr_out32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
mb();
isb();
@ -233,4 +259,12 @@ step2:
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
/* exit self-refresh */
temp_sdram_cfg = ddr_in32(&ddr->sdram_cfg_2);
temp_sdram_cfg &= ~SDRAM_CFG2_FRC_SR;
ddr_out32(&ddr->sdram_cfg_2, temp_sdram_cfg);
}
#endif
}

67
drivers/ddr/fsl/mpc85xx_ddr_gen3.c
View File

@ -15,8 +15,6 @@
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* regs has the to-be-set values for DDR controller registers
* ctrl_num is the DDR controller number
@ -44,16 +42,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
u32 save1, save2;
#endif
#ifdef CONFIG_DEEP_SLEEP
const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
bool sleep_flag = 0;
#endif
#ifdef CONFIG_DEEP_SLEEP
if (in_be32(&gur->scrtsr[0]) & (1 << 3))
sleep_flag = 1;
#endif
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
@ -130,13 +118,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
out_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
else
#endif
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
@ -149,17 +130,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag) {
out_be32(&ddr->init_addr, 0);
out_be32(&ddr->init_ext_addr, (1 << 31));
} else
#endif
{
out_be32(&ddr->init_addr, regs->ddr_init_addr);
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
}
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
@ -180,7 +150,24 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
#ifdef CONFIG_DEEP_SLEEP
if (is_warm_boot()) {
out_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
out_be32(&ddr->init_addr, CONFIG_SYS_SDRAM_BASE);
out_be32(&ddr->init_ext_addr, DDR_INIT_ADDR_EXT_UIA);
/* DRAM VRef will not be trained */
out_be32(&ddr->ddr_cdr2,
regs->ddr_cdr2 & ~DDR_CDR2_VREF_TRAIN_EN);
} else
#endif
{
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->init_addr, regs->ddr_init_addr);
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
}
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
@ -400,21 +387,17 @@ step2:
asm volatile("sync;isync");
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag) {
if (is_warm_boot()) {
/* enter self-refresh */
setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
/* do board specific memory setup */
board_mem_sleep_setup();
}
#endif
/* Let the controller go */
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
else
} else
#endif
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
/* Let the controller go */
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
@ -566,8 +549,8 @@ step2:
}
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
if (is_warm_boot())
/* exit self-refresh */
clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_FRC_SR);
#endif
}

2
drivers/mtd/nand/fsl_ifc_nand.c
View File

@ -292,7 +292,7 @@ static int fsl_ifc_run_command(struct mtd_info *mtd)
struct fsl_ifc *ifc = ctrl->regs;
u32 timeo = (CONFIG_SYS_HZ * 10) / 1000;
u32 time_start;
u32 eccstat[4];
u32 eccstat[4] = {0};
int i;
/* set the chip select for NAND Transaction */

10
drivers/mtd/nand/fsl_ifc_spl.c
View File

@ -254,3 +254,13 @@ void nand_boot(void)
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}
#ifndef CONFIG_SPL_NAND_INIT
void nand_init(void)
{
}
void nand_deselect(void)
{
}
#endif

1
drivers/pci/Makefile
View File

@ -17,3 +17,4 @@ obj-$(CONFIG_SH7751_PCI) +=pci_sh7751.o
obj-$(CONFIG_SH7780_PCI) +=pci_sh7780.o
obj-$(CONFIG_TSI108_PCI) += tsi108_pci.o
obj-$(CONFIG_WINBOND_83C553) += w83c553f.o
obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o

51
drivers/pci/pcie_layerscape.c Normal file
View File

@ -0,0 +1,51 @@
/*
* Copyright 2014 Freescale Semiconductor, Inc.
* Layerscape PCIe driver
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/fsl_serdes.h>
#include <pci.h>
#include <asm/io.h>
#include <asm/pcie_layerscape.h>
#ifdef CONFIG_OF_BOARD_SETUP
#include <libfdt.h>
#include <fdt_support.h>
static void ft_pcie_ls_setup(void *blob, const char *pci_compat,
unsigned long ctrl_addr, enum srds_prtcl dev)
{
int off;
off = fdt_node_offset_by_compat_reg(blob, pci_compat,
(phys_addr_t)ctrl_addr);
if (off < 0)
return;
if (!is_serdes_configured(dev))
fdt_set_node_status(blob, off, FDT_STATUS_DISABLED, 0);
}
void ft_pcie_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCIE1
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE1_ADDR, PCIE1);
#endif
#ifdef CONFIG_PCIE2
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE2_ADDR, PCIE2);
#endif
}
#else
void ft_pcie_setup(void *blob, bd_t *bd)
{
}
#endif
void pci_init_board(void)
{
}

186
drivers/usb/host/ehci-fsl.c
View File

@ -15,9 +15,14 @@
#include <usb/ehci-fsl.h>
#include <hwconfig.h>
#include <fsl_usb.h>
#include <fdt_support.h>
#include "ehci.h"
#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#endif
static void set_txfifothresh(struct usb_ehci *, u32);
/* Check USB PHY clock valid */
@ -158,3 +163,184 @@ static void set_txfifothresh(struct usb_ehci *ehci, u32 txfifo_thresh)
cmd |= TXFIFO_THRESH(txfifo_thresh);
ehci_writel(&ehci->txfilltuning, cmd);
}
#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
const char *phy_type, int start_offset)
{
const char *compat_dr = "fsl-usb2-dr";
const char *compat_mph = "fsl-usb2-mph";
const char *prop_mode = "dr_mode";
const char *prop_type = "phy_type";
const char *node_type = NULL;
int node_offset;
int err;
node_offset = fdt_node_offset_by_compatible(blob,
start_offset, compat_mph);
if (node_offset < 0) {
node_offset = fdt_node_offset_by_compatible(blob,
start_offset,
compat_dr);
if (node_offset < 0) {
printf("WARNING: could not find compatible node: %s",
fdt_strerror(node_offset));
return -1;
}
node_type = compat_dr;
} else {
node_type = compat_mph;
}
if (mode) {
err = fdt_setprop(blob, node_offset, prop_mode, mode,
strlen(mode) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
prop_mode, node_type, fdt_strerror(err));
}
if (phy_type) {
err = fdt_setprop(blob, node_offset, prop_type, phy_type,
strlen(phy_type) + 1);
if (err < 0)
printf("WARNING: could not set %s for %s: %s.\n",
prop_type, node_type, fdt_strerror(err));
}
return node_offset;
}
static const char *fdt_usb_get_node_type(void *blob, int start_offset,
int *node_offset)
{
const char *compat_dr = "fsl-usb2-dr";
const char *compat_mph = "fsl-usb2-mph";
const char *node_type = NULL;
*node_offset = fdt_node_offset_by_compatible(blob, start_offset,
compat_mph);
if (*node_offset < 0) {
*node_offset = fdt_node_offset_by_compatible(blob,
start_offset,
compat_dr);
if (*node_offset < 0) {
printf("ERROR: could not find compatible node: %s\n",
fdt_strerror(*node_offset));
} else {
node_type = compat_dr;
}
} else {
node_type = compat_mph;
}
return node_type;
}
static int fdt_fixup_usb_erratum(void *blob, const char *prop_erratum,
int start_offset)
{
int node_offset, err;
const char *node_type = NULL;
node_type = fdt_usb_get_node_type(blob, start_offset, &node_offset);
if (!node_type)
return -1;
err = fdt_setprop(blob, node_offset, prop_erratum, NULL, 0);
if (err < 0) {
printf("ERROR: could not set %s for %s: %s.\n",
prop_erratum, node_type, fdt_strerror(err));
}
return node_offset;
}
void fdt_fixup_dr_usb(void *blob, bd_t *bd)
{
static const char * const modes[] = { "host", "peripheral", "otg" };
static const char * const phys[] = { "ulpi", "utmi" };
int usb_erratum_a006261_off = -1;
int usb_erratum_a007075_off = -1;
int usb_erratum_a007792_off = -1;
int usb_mode_off = -1;
int usb_phy_off = -1;
char str[5];
int i, j;
for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
const char *dr_mode_type = NULL;
const char *dr_phy_type = NULL;
int mode_idx = -1, phy_idx = -1;
snprintf(str, 5, "%s%d", "usb", i);
if (hwconfig(str)) {
for (j = 0; j < ARRAY_SIZE(modes); j++) {
if (hwconfig_subarg_cmp(str, "dr_mode",
modes[j])) {
mode_idx = j;
break;
}
}
for (j = 0; j < ARRAY_SIZE(phys); j++) {
if (hwconfig_subarg_cmp(str, "phy_type",
phys[j])) {
phy_idx = j;
break;
}
}
if (mode_idx < 0 && phy_idx < 0) {
printf("WARNING: invalid phy or mode\n");
return;
}
if (mode_idx > -1)
dr_mode_type = modes[mode_idx];
if (phy_idx > -1)
dr_phy_type = phys[phy_idx];
}
usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
dr_mode_type, NULL,
usb_mode_off);
if (usb_mode_off < 0)
return;
usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
NULL, dr_phy_type,
usb_phy_off);
if (usb_phy_off < 0)
return;
if (has_erratum_a006261()) {
usb_erratum_a006261_off = fdt_fixup_usb_erratum
(blob,
"fsl,usb-erratum-a006261",
usb_erratum_a006261_off);
if (usb_erratum_a006261_off < 0)
return;
}
if (has_erratum_a007075()) {
usb_erratum_a007075_off = fdt_fixup_usb_erratum
(blob,
"fsl,usb-erratum-a007075",
usb_erratum_a007075_off);
if (usb_erratum_a007075_off < 0)
return;
}
if (has_erratum_a007792()) {
usb_erratum_a007792_off = fdt_fixup_usb_erratum
(blob,
"fsl,usb-erratum-a007792",
usb_erratum_a007792_off);
if (usb_erratum_a007792_off < 0)
return;
}
}
}
#endif

175
include/configs/ls1021aqds.h
View File

@ -37,8 +37,85 @@ unsigned long get_board_sys_clk(void);
unsigned long get_board_ddr_clk(void);
#endif
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#define CONFIG_QIXIS_I2C_ACCESS
#else
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
#define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
#endif
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021aqds/ls102xa_pbi.cfg
#endif
#ifdef CONFIG_SD_BOOT
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_SYS_TEXT_BASE 0x82000000
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN 0x80000
#endif
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x40010000
#define CONFIG_SYS_NO_FLASH
#endif
#ifdef CONFIG_NAND_BOOT
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_nand.cfg
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_SYS_TEXT_BASE 0x82000000
#define CONFIG_SYS_NAND_U_BOOT_SIZE (400 << 10)
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN 0x80000
#endif
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x67f80000
@ -71,13 +148,15 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_CAAM /* Enable CAAM */
#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
/*
* IFC Definitions
*/
#ifndef CONFIG_QSPI_BOOT
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@ -170,6 +249,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMD_NAND
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
#endif
/*
* QIXIS Definitions
@ -214,6 +294,40 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_FPGA_FTIM3 0x0
#endif
#if defined(CONFIG_NAND_BOOT)
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK
#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR
#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0
#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1
#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2
#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3
#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT
#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR
#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK
#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR
#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0
#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1
#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2
#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3
#define CONFIG_SYS_CSPR3_EXT CONFIG_SYS_FPGA_CSPR_EXT
#define CONFIG_SYS_CSPR3 CONFIG_SYS_FPGA_CSPR
#define CONFIG_SYS_AMASK3 CONFIG_SYS_FPGA_AMASK
#define CONFIG_SYS_CSOR3 CONFIG_SYS_FPGA_CSOR
#define CONFIG_SYS_CS3_FTIM0 CONFIG_SYS_FPGA_FTIM0
#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
#else
#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT
#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR
#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK
@ -246,6 +360,7 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_FPGA_FTIM1
#define CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_FPGA_FTIM2
#define CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_FPGA_FTIM3
#endif
/*
* Serial Port
@ -279,6 +394,21 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
/* QSPI */
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_FSL_QSPI
#define QSPI0_AMBA_BASE 0x40000000
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SPANSION
#endif
/*
* USB
*/
@ -341,6 +471,14 @@ unsigned long get_board_ddr_clk(void);
#endif
#endif
/* PCIe */
#define CONFIG_PCI /* Enable PCI/PCIE */
#define CONFIG_PCIE1 /* PCIE controler 1 */
#define CONFIG_PCIE2 /* PCIE controler 2 */
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@ -348,7 +486,20 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
#ifdef CONFIG_QSPI_BOOT
#undef CONFIG_CMD_IMLS
#else
#define CONFIG_CMD_IMLS
#endif
#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LS102XA_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_TIMER_CLK_FREQ 12500000
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
@ -385,6 +536,8 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define CONFIG_LS102XA_STREAM_ID
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
@ -396,17 +549,37 @@ unsigned long get_board_ddr_clk(void);
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
/*
* Environment
*/
#define CONFIG_ENV_OVERWRITE
#if defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET 0x100000
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x2000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
#define CONFIG_ENV_SECT_SIZE 0x10000
#elif defined(CONFIG_NAND_BOOT)
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP

95
include/configs/ls1021atwr.h
View File

@ -35,6 +35,43 @@
#define CONFIG_SYS_CLK_FREQ 100000000
#define CONFIG_DDR_CLK_FREQ 100000000
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
#endif
#ifdef CONFIG_SD_BOOT
#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021atwr/ls102xa_rcw_sd.cfg
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_LDSCRIPT "arch/$(ARCH)/cpu/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_ENV_SUPPORT
#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
#define CONFIG_SPL_I2C_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
#define CONFIG_SPL_TEXT_BASE 0x10000000
#define CONFIG_SPL_MAX_SIZE 0x1a000
#define CONFIG_SPL_STACK 0x1001d000
#define CONFIG_SPL_PAD_TO 0x1c000
#define CONFIG_SYS_TEXT_BASE 0x82000000
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
#define CONFIG_SYS_MONITOR_LEN 0x80000
#endif
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_SYS_TEXT_BASE 0x40010000
#define CONFIG_SYS_NO_FLASH
#endif
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0x67f80000
#endif
@ -50,13 +87,15 @@
#define CONFIG_FSL_CAAM /* Enable CAAM */
#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI)
#if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \
!defined(CONFIG_QSPI_BOOT)
#define CONFIG_U_QE
#endif
/*
* IFC Definitions
*/
#ifndef CONFIG_QSPI_BOOT
#define CONFIG_FSL_IFC
#define CONFIG_SYS_FLASH_BASE 0x60000000
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
@ -100,6 +139,7 @@
#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
#define CONFIG_SYS_WRITE_SWAPPED_DATA
#endif
/* CPLD */
@ -180,6 +220,21 @@
#define CONFIG_FSL_ESDHC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
/* QSPI */
#ifdef CONFIG_QSPI_BOOT
#define CONFIG_FSL_QSPI
#define QSPI0_AMBA_BASE 0x40000000
#define FSL_QSPI_FLASH_SIZE (1 << 24)
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
#endif
/*
* Video
*/
@ -236,6 +291,13 @@
#define CONFIG_HAS_ETH2
#endif
/* PCIe */
#define CONFIG_PCI /* Enable PCI/PCIE */
#define CONFIG_PCIE1 /* PCIE controler 1 */
#define CONFIG_PCIE2 /* PCIE controler 2 */
#define CONFIG_PCIE_LAYERSCAPE /* Use common FSL Layerscape PCIe code */
#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie"
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
@ -243,7 +305,20 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_CMDLINE_EDITING
#ifdef CONFIG_QSPI_BOOT
#undef CONFIG_CMD_IMLS
#else
#define CONFIG_CMD_IMLS
#endif
#define CONFIG_ARMV7_NONSEC
#define CONFIG_ARMV7_VIRT
#define CONFIG_PEN_ADDR_BIG_ENDIAN
#define CONFIG_LS102XA_NS_ACCESS
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define CONFIG_TIMER_CLK_FREQ 12500000
#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
@ -277,6 +352,8 @@
#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define CONFIG_LS102XA_STREAM_ID
/*
* Stack sizes
* The stack sizes are set up in start.S using the settings below
@ -288,7 +365,11 @@
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
#else
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#endif
#define CONFIG_SYS_QE_FW_ADDR 0x67f40000
@ -297,10 +378,22 @@
*/
#define CONFIG_ENV_OVERWRITE
#if defined(CONFIG_SD_BOOT)
#define CONFIG_ENV_OFFSET 0x100000
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 0x20000
#elif defined(CONFIG_QSPI_BOOT)
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_ENV_OFFSET 0x100000
#define CONFIG_ENV_SECT_SIZE 0x10000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE 0x20000
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
#endif
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP

1
include/configs/sun7i.h
View File

@ -25,6 +25,7 @@
#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_SYS_CLK_FREQ 24000000
#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ
/*
* Include common sunxi configuration where most the settings are

12
include/fsl_ddr_sdram.h
View File

@ -114,6 +114,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define SDRAM_CFG_2T_EN 0x00008000
#define SDRAM_CFG_BI 0x00000001
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
#define SDRAM_CFG2_ODT_NEVER 0
@ -163,6 +164,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
@ -202,6 +204,8 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR_ODT_120ohm 0x6
#endif
#define DDR_INIT_ADDR_EXT_UIA (1 << 31)
/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
struct {
@ -414,9 +418,11 @@ static int __board_need_mem_reset(void)
int board_need_mem_reset(void)
__attribute__((weak, alias("__board_need_mem_reset")));
void __weak board_mem_sleep_setup(void)
{
}
#if defined(CONFIG_DEEP_SLEEP)
void board_mem_sleep_setup(void);
bool is_warm_boot(void);
int fsl_dp_resume(void);
#endif
/*
* The 85xx boards have a common prototype for fixed_sdram so put the

23
include/fsl_usb.h
View File

@ -145,6 +145,25 @@ static inline bool has_erratum_a007798(void)
return SVR_SOC_VER(get_svr()) == SVR_T4240 &&
IS_SVR_REV(get_svr(), 2, 0);
}
static inline bool has_erratum_a007792(void)
{
u32 svr = get_svr();
u32 soc = SVR_SOC_VER(svr);
switch (soc) {
case SVR_T4240:
case SVR_T4160:
return IS_SVR_REV(svr, 2, 0);
case SVR_T1040:
return IS_SVR_REV(svr, 1, 0);
case SVR_T2080:
case SVR_T2081:
return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 1, 1);
}
return false;
}
#else
static inline bool has_erratum_a006261(void)
{
@ -161,5 +180,9 @@ static inline bool has_erratum_a007798(void)
return false;
}
static inline bool has_erratum_a007792(void)
{
return false;
}
#endif
#endif /*_ASM_FSL_USB_H_ */

110
tools/pblimage.c
View File

@ -1,5 +1,5 @@
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2012-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@ -8,6 +8,10 @@
#include "pblimage.h"
#include "pbl_crc32.h"
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define PBL_ACS_CONT_CMD 0x81000000
#define PBL_ADDR_24BIT_MASK 0x00ffffff
/*
* Initialize to an invalid value.
*/
@ -22,6 +26,13 @@ static int pbl_size;
static char *fname = "Unknown";
static int lineno = -1;
static struct pbl_header pblimage_header;
static int uboot_size;
static int arch_flag;
static uint32_t pbl_cmd_initaddr;
static uint32_t pbi_crc_cmd1;
static uint32_t pbi_crc_cmd2;
static uint32_t pbl_end_cmd[4];
static union
{
@ -38,20 +49,6 @@ static union
* start offset by subtracting the size of the u-boot image from the
* top of the allowable 24-bit range.
*/
static void init_next_pbl_cmd(FILE *fp_uboot)
{
struct stat st;
int fd = fileno(fp_uboot);
if (fstat(fd, &st) == -1) {
printf("Error: Could not determine u-boot image size. %s\n",
strerror(errno));
exit(EXIT_FAILURE);
}
next_pbl_cmd = 0x82000000 - st.st_size;
}
static void generate_pbl_cmd(void)
{
uint32_t val = next_pbl_cmd;
@ -66,11 +63,15 @@ static void generate_pbl_cmd(void)
static void pbl_fget(size_t size, FILE *stream)
{
unsigned char c;
unsigned char c = 0xff;
int c_temp;
while (size && (c_temp = fgetc(stream)) != EOF) {
c = (unsigned char)c_temp;
while (size) {
c_temp = fgetc(stream);
if (c_temp != EOF)
c = (unsigned char)c_temp;
else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
c = 0xff;
*pmem_buf++ = c;
pbl_size++;
size--;
@ -80,8 +81,8 @@ static void pbl_fget(size_t size, FILE *stream)
/* load split u-boot with PBI command 81xxxxxx. */
static void load_uboot(FILE *fp_uboot)
{
init_next_pbl_cmd(fp_uboot);
while (next_pbl_cmd < 0x82000000) {
next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
while (next_pbl_cmd < pbl_cmd_initaddr) {
generate_pbl_cmd();
pbl_fget(64, fp_uboot);
}
@ -154,8 +155,6 @@ static uint32_t reverse_byte(uint32_t val)
/* write end command and crc command to memory. */
static void add_end_cmd(void)
{
uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
0x091380c0, 0x00000000};
uint32_t crc32_pbl;
int i;
unsigned char *p = (unsigned char *)&pbl_end_cmd;
@ -172,8 +171,8 @@ static void add_end_cmd(void)
/* Add PBI CRC command. */
*pmem_buf++ = 0x08;
*pmem_buf++ = 0x13;
*pmem_buf++ = 0x80;
*pmem_buf++ = pbi_crc_cmd1;
*pmem_buf++ = pbi_crc_cmd2;
*pmem_buf++ = 0x40;
pbl_size += 4;
@ -184,17 +183,6 @@ static void add_end_cmd(void)
*pmem_buf++ = (crc32_pbl >> 8) & 0xff;
*pmem_buf++ = (crc32_pbl) & 0xff;
pbl_size += 4;
if ((pbl_size % 16) != 0) {
for (i = 0; i < 8; i++) {
*pmem_buf++ = 0x0;
pbl_size++;
}
}
if ((pbl_size % 16 != 0)) {
printf("Error: Bad size of image file\n");
exit(EXIT_FAILURE);
}
}
void pbl_load_uboot(int ifd, struct image_tool_params *params)
@ -268,12 +256,64 @@ static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
/*nothing need to do, pbl_load_uboot takes care of whole file. */
}
int pblimage_check_params(struct image_tool_params *params)
{
FILE *fp_uboot;
int fd;
struct stat st;
if (!params)
return EXIT_FAILURE;
fp_uboot = fopen(params->datafile, "r");
if (fp_uboot == NULL) {
printf("Error: %s open failed\n", params->datafile);
exit(EXIT_FAILURE);
}
fd = fileno(fp_uboot);
if (fstat(fd, &st) == -1) {
printf("Error: Could not determine u-boot image size. %s\n",
strerror(errno));
exit(EXIT_FAILURE);
}
/* For the variable size, we need to pad it to 64 byte boundary */
uboot_size = roundup(st.st_size, 64);
if (params->arch == IH_ARCH_ARM) {
arch_flag = IH_ARCH_ARM;
pbi_crc_cmd1 = 0x61;
pbi_crc_cmd2 = 0;
pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
pbl_cmd_initaddr |= uboot_size;
pbl_end_cmd[0] = 0x09610000;
pbl_end_cmd[1] = 0x00000000;
pbl_end_cmd[2] = 0x096100c0;
pbl_end_cmd[3] = 0x00000000;
} else if (params->arch == IH_ARCH_PPC) {
arch_flag = IH_ARCH_PPC;
pbi_crc_cmd1 = 0x13;
pbi_crc_cmd2 = 0x80;
pbl_cmd_initaddr = 0x82000000;
pbl_end_cmd[0] = 0x09138000;
pbl_end_cmd[1] = 0x00000000;
pbl_end_cmd[2] = 0x091380c0;
pbl_end_cmd[3] = 0x00000000;
}
next_pbl_cmd = pbl_cmd_initaddr;
return 0;
};
/* pblimage parameters */
static struct image_type_params pblimage_params = {
.name = "Freescale PBL Boot Image support",
.header_size = sizeof(struct pbl_header),
.hdr = (void *)&pblimage_header,
.check_image_type = pblimage_check_image_types,
.check_params = pblimage_check_params,
.verify_header = pblimage_verify_header,
.print_header = pblimage_print_header,
.set_header = pblimage_set_header,