Merge branch 'next'

This brings in the u-boot-net PR from Joe.

arch/arm/dts/ast2500-evb.dts

@@ -11,6 +11,11 @@
 	chosen {
 		stdout-path = &uart5;
 	};
+
+	aliases {
+		ethernet0 = &mac0;
+		ethernet1 = &mac1;
+	};
 };
 
 &uart5 {
@@ -36,3 +41,21 @@
 	u-boot,dm-pre-reloc;
 	status = "okay";
 };
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mac1link_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mac2link_default &pinctrl_mdio2_default>;
+};

arch/arm/include/asm/ti-common/keystone_net.h

@@ -57,19 +57,6 @@
 /* MDIO clock output frequency */
 #define EMAC_MDIO_CLOCK_FREQ		2500000	/* 2.5 MHz */
 
-/* MII Status Register */
-#define MII_STATUS_REG			1
-#define MII_STATUS_LINK_MASK		0x4
-
-#define MDIO_CONTROL_IDLE		0x80000000
-#define MDIO_CONTROL_ENABLE		0x40000000
-#define MDIO_CONTROL_FAULT_ENABLE	0x40000
-#define MDIO_CONTROL_FAULT		0x80000
-#define MDIO_USERACCESS0_GO		0x80000000
-#define MDIO_USERACCESS0_WRITE_READ	0x0
-#define MDIO_USERACCESS0_WRITE_WRITE	0x40000000
-#define MDIO_USERACCESS0_ACK		0x20000000
-
 #define EMAC_MACCONTROL_MIIEN_ENABLE		0x20
 #define EMAC_MACCONTROL_FULLDUPLEX_ENABLE	0x1
 #define EMAC_MACCONTROL_GIGABIT_ENABLE		BIT(7)
@@ -242,18 +229,4 @@ struct mdio_regs {
 	u32 userphysel1;
 };
 
-struct eth_priv_t {
-	char int_name[32];
-	int rx_flow;
-	int phy_addr;
-	int slave_port;
-	int sgmii_link_type;
-	phy_interface_t phy_if;
-	struct phy_device *phy_dev;
-};
-
-int keystone2_emac_initialize(struct eth_priv_t *eth_priv);
-void sgmii_serdes_setup_156p25mhz(void);
-void sgmii_serdes_shutdown(void);
-
 #endif  /* _KEYSTONE_NET_H_ */

arch/arm/mach-davinci/dp83848.c

@@ -12,7 +12,7 @@
 #include <net.h>
 #include <dp83848.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC
 

arch/arm/mach-davinci/et1011c.c

@@ -9,7 +9,7 @@
 #include <net.h>
 #include <miiphy.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC
 

arch/arm/mach-davinci/ksz8873.c

@@ -19,7 +19,7 @@
 #include <net.h>
 #include <asm/arch/emac_defs.h>
 #include <asm/io.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 int ksz8873_is_phy_connected(int phy_addr)
 {

arch/arm/mach-davinci/lxt972.c

@@ -13,7 +13,7 @@
 #include <miiphy.h>
 #include <lxt971a.h>
 #include <asm/arch/emac_defs.h>
-#include "../../../drivers/net/davinci_emac.h"
+#include "../../../drivers/net/ti/davinci_emac.h"
 
 #ifdef CONFIG_DRIVER_TI_EMAC