fpga: spartan3: Use logging feature instead of FPGA_DEBUG

Instead of using DEBUG or LOG_DEBUG the driver still had its own
definition for debug output.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20221007122003.11239-10-ada@thorsis.com
This commit is contained in:
Alexander Dahl 2022-10-07 14:20:02 +02:00 committed by Michal Simek
parent bc33b69604
commit 1fda847114

View File

@ -9,15 +9,11 @@
* on spartan2.c (Rich Ireland, rireland@enterasys.com).
*/
#include <common.h> /* core U-Boot definitions */
#include <spartan3.h> /* Spartan-II device family */
#define LOG_CATEGORY UCLASS_FPGA
/* Define FPGA_DEBUG to get debug printf's */
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
#include <common.h> /* core U-Boot definitions */
#include <log.h>
#include <spartan3.h> /* Spartan-II device family */
#undef CONFIG_SYS_FPGA_CHECK_BUSY
@ -51,12 +47,12 @@ static int spartan3_load(xilinx_desc *desc, const void *buf, size_t bsize,
switch (desc->iface) {
case slave_serial:
PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__);
log_debug("Launching Slave Serial Load\n");
ret_val = spartan3_ss_load(desc, buf, bsize);
break;
case slave_parallel:
PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__);
log_debug("Launching Slave Parallel Load\n");
ret_val = spartan3_sp_load(desc, buf, bsize);
break;
@ -74,12 +70,12 @@ static int spartan3_dump(xilinx_desc *desc, const void *buf, size_t bsize)
switch (desc->iface) {
case slave_serial:
PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__);
log_debug("Launching Slave Serial Dump\n");
ret_val = spartan3_ss_dump(desc, buf, bsize);
break;
case slave_parallel:
PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__);
log_debug("Launching Slave Parallel Dump\n");
ret_val = spartan3_sp_dump(desc, buf, bsize);
break;
@ -105,8 +101,7 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize)
int ret_val = FPGA_FAIL; /* assume the worst */
xilinx_spartan3_slave_parallel_fns *fn = desc->iface_fns;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
log_debug("start with interface functions @ 0x%p\n", fn);
if (fn) {
size_t bytecount = 0;
@ -114,24 +109,24 @@ static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize)
int cookie = desc->cookie; /* make a local copy */
unsigned long ts; /* timestamp */
PRINTF ("%s: Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"pre: 0x%p\n"
"pgm:\t0x%p\n"
"init:\t0x%p\n"
"err:\t0x%p\n"
"clk:\t0x%p\n"
"cs:\t0x%p\n"
"wr:\t0x%p\n"
"read data:\t0x%p\n"
"write data:\t0x%p\n"
"busy:\t0x%p\n"
"abort:\t0x%p\n"
"post:\t0x%p\n\n",
__FUNCTION__, &fn, fn, fn->pre, fn->pgm, fn->init, fn->err,
fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, fn->busy,
fn->abort, fn->post);
log_debug("Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"pre: 0x%p\n"
"pgm:\t0x%p\n"
"init:\t0x%p\n"
"err:\t0x%p\n"
"clk:\t0x%p\n"
"cs:\t0x%p\n"
"wr:\t0x%p\n"
"read data:\t0x%p\n"
"write data:\t0x%p\n"
"busy:\t0x%p\n"
"abort:\t0x%p\n"
"post:\t0x%p\n\n",
&fn, fn, fn->pre, fn->pgm, fn->init, fn->err,
fn->clk, fn->cs, fn->wr, fn->rdata, fn->wdata, fn->busy,
fn->abort, fn->post);
/*
* This code is designed to emulate the "Express Style"
@ -309,8 +304,7 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize)
int i;
unsigned char val;
PRINTF ("%s: start with interface functions @ 0x%p\n",
__FUNCTION__, fn);
log_debug("start with interface functions @ 0x%p\n", fn);
if (fn) {
size_t bytecount = 0;
@ -318,16 +312,16 @@ static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize)
int cookie = desc->cookie; /* make a local copy */
unsigned long ts; /* timestamp */
PRINTF ("%s: Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"pgm:\t0x%p\n"
"init:\t0x%p\n"
"clk:\t0x%p\n"
"wr:\t0x%p\n"
"done:\t0x%p\n\n",
__FUNCTION__, &fn, fn, fn->pgm, fn->init,
fn->clk, fn->wr, fn->done);
log_debug("Function Table:\n"
"ptr:\t0x%p\n"
"struct: 0x%p\n"
"pgm:\t0x%p\n"
"init:\t0x%p\n"
"clk:\t0x%p\n"
"wr:\t0x%p\n"
"done:\t0x%p\n\n",
&fn, fn, fn->pgm, fn->init,
fn->clk, fn->wr, fn->done);
#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK
printf ("Loading FPGA Device %d...\n", cookie);
#endif