leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

drivers: net: fsl_enetc: register internal MDIO bus

Browse Source 
This bus is used to access internal SoC PHYs.  These PHYs are configured
by the ENETC driver directly, but it's useful to have command line access
to this MDIO to debug the system especially when using new external PHYs.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
This commit is contained in:
Alex Marginean 2019-11-25 17:57:27 +02:00 committed by Joe Hershberger
parent 6c96446859
commit 1e354cb393
1 changed files with 7 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

15
drivers/net/fsl_enetc.c
View File

@ -156,19 +156,14 @@ static void enetc_start_pcs(struct udevice *dev)
priv->if_type = PHY_INTERFACE_MODE_NONE;
/* check internal mdio capability, not all ports need it */
/* register internal MDIO for debug purposes */
if (enetc_read_port(priv, ENETC_PCAPR0) & ENETC_PCAPRO_MDIO) {
/*
* set up internal MDIO, this is part of ETH PCI function and is
* used to access serdes / internal SoC PHYs.
* We don't currently register it as a MDIO bus as it goes away
* when the interface is removed, so it can't practically be
* used in the console.
*/
priv->imdio.read = enetc_mdio_read;
priv->imdio.write = enetc_mdio_write;
priv->imdio.priv = priv->port_regs + ENETC_PM_IMDIO_BASE;
strncpy(priv->imdio.name, dev->name, MDIO_NAME_LEN);
if (!miiphy_get_dev_by_name(priv->imdio.name))
mdio_register(&priv->imdio);
}
if (!ofnode_valid(dev->node)) {
@ -451,6 +446,10 @@ static void enetc_stop(struct udevice *dev)
{
/* FLR is sufficient to quiesce the device */
dm_pci_flr(dev);
/* leave the BARs accessible after we stop, this is needed to use
* internal MDIO in command line.
*/
dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
}
/*