leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fix various typos, scattered over the code.

Browse Source 
Spelling corrections for (among other things):

* environment
* override
* variable
* ftd (should be "fdt", for flattened device tree)
* embedded
* FTDI
* emulation
* controller
This commit is contained in:
Robert P. J. Day 2016-05-04 04:47:31 -04:00 committed by Tom Rini
parent b955e42bad
commit 1cc0a9f496
24 changed files with 29 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/cpu/armv8/fsl-layerscape/fsl_lsch3_speed.c
View File

@ -180,7 +180,7 @@ ulong get_ddr_freq(ulong ctrl_num)
/*
* DDR controller 0 & 1 are on memory complex 0
* DDR controler 2 is on memory complext 1
* DDR controller 2 is on memory complext 1
*/
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (ctrl_num >= 2)

2
arch/arm/mach-uniphier/boot-mode/boot-mode.c
View File

@ -114,7 +114,7 @@ static int do_mmcsetn(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
mmcsetn, 1, 1, do_mmcsetn,
"Set the first MMC (not SD) dev number to \"mmc_first_dev\" enviroment",
"Set the first MMC (not SD) dev number to \"mmc_first_dev\" environment",
""
);
#endif

2
arch/mips/Kconfig
View File

@ -145,7 +145,7 @@ config MIPS_BOOT_ENV_LEGACY
Enable this option if you want U-Boot to hand over the Yamon-style
environment to the kernel. Information like memory size, initrd
address and size will be prepared as zero-terminated key/value list.
The address of the enviroment is stored in register $a2.
The address of the environment is stored in register $a2.
config MIPS_BOOT_FDT
bool "Hand over a flattened device tree to Linux kernel"

2
arch/powerpc/cpu/ppc4xx/denali_spd_ddr2.c
View File

@ -1151,7 +1151,7 @@ phys_size_t initdram(int board_type)
dram_size *= ranks;
debug("dram_size = %lu\n", dram_size);
/* Start the SDRAM controler */
/* Start the SDRAM controller */
mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
denali_wait_for_dlllock();

4
board/freescale/common/fsl_validate.c
View File

@ -812,9 +812,9 @@ static int calculate_cmp_img_sig(struct fsl_secboot_img_priv *img)
}
/* haddr - Address of the header of image to be validated.
* arg_hash_str - Option hash string. If provided, this
* overides the key hash in the SFP fuses.
* overrides the key hash in the SFP fuses.
* img_addr_ptr - Optional pointer to address of image to be validated.
* If non zero addr, this overides the addr of image in header,
* If non zero addr, this overrides the addr of image in header,
* otherwise updated to image addr in header.
* Acts as both input and output of function.
* This pointer shouldn't be NULL.

2
board/freescale/mx28evk/README
View File

@ -45,7 +45,7 @@ or
or
"make mx28evk_spi_config" - store enviroment variables into SPI NOR flash
"make mx28evk_spi_config" - store environment variables into SPI NOR flash
Choose the target accordingly.

2
cmd/fdt.c
View File

@ -1055,7 +1055,7 @@ static char fdt_help_text[] =
" <start> - addr of key blob\n"
" default gd->fdt_blob\n"
#endif
"NOTE: Dereference aliases by omiting the leading '/', "
"NOTE: Dereference aliases by omitting the leading '/', "
"e.g. fdt print ethernet0.";
#endif

2
cmd/mtdparts.c
View File

@ -1742,7 +1742,7 @@ int mtdparts_init(void)
debug("last_partition : %s\n", last_partition);
debug("env_partition : %s\n", current_partition);
/* if mtdids varible is empty try to use defaults */
/* if mtdids variable is empty try to use defaults */
if (!ids) {
if (mtdids_default) {
debug("mtdids variable not defined, using default\n");

2
doc/README.commands.spl
View File

@ -10,7 +10,7 @@ export has two subcommands:
fdt: exports the FDT
Call is:
spl export <ftd|atags> [kernel_addr] [initrd_addr] [fdt_addr if fdt]
spl export <fdt|atags> [kernel_addr] [initrd_addr] [fdt_addr if fdt]
TYPICAL CALL

2
doc/README.marubun-pcmcia
View File

@ -34,7 +34,7 @@ U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver
ex. #define CONFIG_PCMCIA_SLOT_A 1
* CONFIG_SYS_MARUBUN_MRSHPC
This is MR-SHPC-01 PCMCIA controler base address.
This is MR-SHPC-01 PCMCIA controller base address.
You should do the setting matched to your environment.
ex. #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0
( for MS7722SE01 environment )

4
doc/README.mxs
View File

@ -219,7 +219,7 @@ There are two possibilities when preparing an image writable to NAND flash.
This script expects a working TFTP server containing the file
"u-boot.nand" in it's root directory. This can be changed by
adjusting the "update_nand_full_filename" varible.
adjusting the "update_nand_full_filename" variable.
To update the system, run the following in U-Boot prompt:
@ -242,7 +242,7 @@ There are two possibilities when preparing an image writable to NAND flash.
This script expects a working TFTP server containing the file
"u-boot.sb" in it's root directory. This can be changed by
adjusting the "update_nand_firmware_filename" varible.
adjusting the "update_nand_firmware_filename" variable.
To update the system, run the following in U-Boot prompt:

2
doc/SPI/README.sandbox-spi
View File

@ -1,7 +1,7 @@
Sandbox SPI/SPI Flash Implementation
====================================
U-Boot supports SPI and SPI flash emuation in sandbox. This must be enabled
U-Boot supports SPI and SPI flash emulation in sandbox. This must be enabled
using the --spi_sf paramter when starting U-Boot.
For example:

2
doc/SPI/README.ti_qspi_flash
View File

@ -31,7 +31,7 @@ Can be used in:
Memory mapped read mode
-----------------------
In this, SPI controller is configured using configuration port and then
controler is switched to memory mapped port for data read.
controller is switched to memory mapped port for data read.
Driver
------

2
drivers/bios_emulator/x86emu/decode.c
View File

@ -241,7 +241,7 @@ no segment override. Address modes such as -3[BP] or 10[BP+SI] all refer to
addresses relative to SS (ie: on the stack). So, at the minimum, all
decodings of addressing modes would have to set/clear a bit describing
whether the access is relative to DS or SS. That is the function of the
cpu-state-varible M.x86.mode. There are several potential states:
cpu-state-variable M.x86.mode. There are several potential states:
repe prefix seen (handled elsewhere)
repne prefix seen (ditto)

6
drivers/dfu/Kconfig
View File

@ -3,8 +3,8 @@ menu "DFU support"
config DFU_TFTP
bool "DFU via TFTP"
help
This option allows performing update of DFU managed medium with data
send via TFTP boot.
Detailed description of this feature can be found at ./doc/README.dfutftp
This option allows performing update of DFU-managed medium with data
sent via TFTP boot.
Detailed description of this feature can be found at ./doc/README.dfutftp
endmenu

2
drivers/net/macb.c
View File

@ -120,7 +120,7 @@ static int macb_is_gem(struct macb_device *macb)
static int gem_is_gigabit_capable(struct macb_device *macb)
{
/*
* The GEM controllers embeded in SAMA5D2 and SAMA5D4 are
* The GEM controllers embedded in SAMA5D2 and SAMA5D4 are
* configured to support only 10/100.
*/
return macb_is_gem(macb) && !cpu_is_sama5d2() && !cpu_is_sama5d4();

2
drivers/net/sh_eth.c
View File

@ -1,5 +1,5 @@
/*
* sh_eth.c - Driver for Renesas ethernet controler.
* sh_eth.c - Driver for Renesas ethernet controller.
*
* Copyright (C) 2008, 2011 Renesas Solutions Corp.
* Copyright (c) 2008, 2011, 2014 2014 Nobuhiro Iwamatsu

2
drivers/net/sh_eth.h
View File

@ -1,5 +1,5 @@
/*
* sh_eth.h - Driver for Renesas SuperH ethernet controler.
* sh_eth.h - Driver for Renesas SuperH ethernet controller.
*
* Copyright (C) 2008 - 2012 Renesas Solutions Corp.
* Copyright (c) 2008 - 2012 Nobuhiro Iwamatsu

2
drivers/thermal/Kconfig
View File

@ -1,7 +1,7 @@
config DM_THERMAL
bool "Driver support for thermal devices"
help
Enable support for temporary-sensing devices. Some SoCs have on-chip
Enable support for temperature-sensing devices. Some SoCs have on-chip
temperature sensors to permit warnings, speed throttling or even
automatic power-off when the temperature gets too high or low. Other
devices may be discrete but connected on a suitable bus.

2
include/configs/hikey.h
View File

@ -121,7 +121,7 @@
"initrd_high=0xffffffffffffffff\0" \
BOOTENV
/* Preserve enviroment on sd card */
/* Preserve environment on sd card */
#define CONFIG_COMMAND_HISTORY
#define CONFIG_ENV_SIZE 0x1000

2
include/configs/omap3_logic.h
View File

@ -140,7 +140,7 @@
#define CONFIG_PREBOOT \
"echo ======================NOTICE============================;"\
"echo \"The u-boot environment is not set.\";" \
"echo \"If using a display a valid display varible for your panel\";" \
"echo \"If using a display a valid display variable for your panel\";" \
"echo \"needs to be set.\";" \
"echo \"Valid display options are:\";" \
"echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \

2
include/configs/pengwyn.h
View File

@ -102,7 +102,7 @@
"run mmcboot;" \
"run nandboot;"
/* NS16550 Configuration: primary UART via FDTI */
/* NS16550 Configuration: primary UART via FTDI */
#define CONFIG_SYS_NS16550_COM1 0x44e09000
#define CONFIG_BAUDRATE 115200

2
include/fdtdec.h
View File

@ -570,7 +570,7 @@ int fdtdec_check_fdt(void);
* @param id Compatible ID to look for
* @param node_list Place to put list of found nodes
* @param maxcount Maximum number of nodes to find
* @return number of nodes found on success, FTD_ERR_... on error
* @return number of nodes found on success, FDT_ERR_... on error
*/
int fdtdec_find_aliases_for_id(const void *blob, const char *name,
enum fdt_compat_id id, int *node_list, int maxcount);

4
tools/moveconfig.py
View File

@ -273,12 +273,12 @@ def log_msg(color_enabled, color, defconfig, msg):
color_text(color_enabled, color, msg) + '\n'
def update_cross_compile():
"""Update per-arch CROSS_COMPILE via enviroment variables
"""Update per-arch CROSS_COMPILE via environment variables
The default CROSS_COMPILE values are available
in the CROSS_COMPILE list above.
You can override them via enviroment variables
You can override them via environment variables
CROSS_COMPILE_{ARCH}.
For example, if you want to override toolchain prefixes