leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

nitrogen6x: reserve used gpios

Browse Source 
This prevents messages like
gpio@20a0000: get_value: error: gpio GPIO2_2 not reserved

when CONFIG_DM_GPIO is enabled.

Also, when CONFIG_DM_GPIO is enabled, checkboard is too
early to use gpio_get_value, so read it directly on failure.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
This commit is contained in:
Troy Kisky 2019-07-29 12:15:56 -07:00 committed by Stefano Babic
parent cdcaee9518
commit 1b51e5f4cd
1 changed files with 29 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
board/boundary/nitrogen6x/nitrogen6x.c
View File

@ -382,6 +382,15 @@ int board_eth_init(bd_t *bis)
struct phy_device *phydev = NULL;
int ret;
gpio_request(WL12XX_WL_IRQ_GP, "wifi_irq");
gpio_request(IMX_GPIO_NR(6, 30), "rgmii_rxc");
gpio_request(IMX_GPIO_NR(6, 25), "rgmii_rd0");
gpio_request(IMX_GPIO_NR(6, 27), "rgmii_rd1");
gpio_request(IMX_GPIO_NR(6, 28), "rgmii_rd2");
gpio_request(IMX_GPIO_NR(6, 29), "rgmii_rd3");
gpio_request(IMX_GPIO_NR(6, 24), "rgmii_rx_ctl");
gpio_request(IMX_GPIO_NR(3, 23), "rgmii_reset_sabrelite");
gpio_request(IMX_GPIO_NR(1, 27), "rgmii_reset_nitrogen6x");
setup_iomux_enet();
#ifdef CONFIG_FEC_MXC
@ -912,7 +921,16 @@ int board_init(void)
int checkboard(void)
{
if (gpio_get_value(WL12XX_WL_IRQ_GP))
int ret = gpio_get_value(WL12XX_WL_IRQ_GP);
if (ret < 0) {
/* The gpios have not been probed yet. Read it myself */
struct gpio_regs *regs = (struct gpio_regs *)GPIO6_BASE_ADDR;
int gpio = WL12XX_WL_IRQ_GP & 0x1f;
ret = (readl(&regs->gpio_psr) >> gpio) & 0x01;
}
if (ret)
puts("Board: Nitrogen6X\n");
else
puts("Board: SABRE Lite\n");
@ -1014,6 +1032,16 @@ static const struct boot_mode board_boot_modes[] = {
int misc_init_r(void)
{
gpio_request(RGB_BACKLIGHT_GP, "lvds backlight");
gpio_request(LVDS_BACKLIGHT_GP, "lvds backlight");
gpio_request(GP_USB_OTG_PWR, "usbotg power");
gpio_request(IMX_GPIO_NR(7, 12), "usbh1 hub reset");
gpio_request(IMX_GPIO_NR(2, 2), "back");
gpio_request(IMX_GPIO_NR(2, 4), "home");
gpio_request(IMX_GPIO_NR(2, 1), "menu");
gpio_request(IMX_GPIO_NR(2, 3), "search");
gpio_request(IMX_GPIO_NR(7, 13), "volup");
gpio_request(IMX_GPIO_NR(4, 5), "voldown");
#ifdef CONFIG_PREBOOT
preboot_keys();
#endif