change mvBL-M7 default env and move to vendor subdir

fix mvBL-M7 config and move to matrix_vision subdir

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

board/matrix_vision/mvblm7/mvblm7_autoscript

@@ -5,11 +5,17 @@ setenv bootdtb bootm \${kernel_boot} \${mv_initrd_addr_ram} \${mv_dtb_addr_ram}
 setenv ramkernel setenv kernel_boot \${loadaddr}
 setenv flashkernel setenv kernel_boot \${mv_kernel_addr}
 setenv cpird cp \${mv_initrd_addr} \${mv_initrd_addr_ram} \${mv_initrd_length}
-setenv bootfromflash run flashkernel cpird ramparam bootdtb
+setenv bootfromflash run flashkernel cpird ramparam addcons bootdtb
 setenv getdtb tftp \${mv_dtb_addr_ram} \${dtb_name}
 setenv cpdtb cp \${mv_dtb_addr} \${mv_dtb_addr_ram} 0x2000
 setenv rundtb fdt addr \${mv_dtb_addr_ram}\;fdt boardsetup
 setenv bootfromnet tftp \${mv_initrd_addr_ram} \${initrd_name}\;run ramkernel
+if test ${console} = yes;
+then
+setenv addcons setenv bootargs \${bootargs} console=ttyS\${console_nr},\${baudrate}N8
+else
+setenv addcons setenv bootargs \${bootargs} console=tty0
+fi
 setenv set_static_ip setenv ipaddr \${static_ipaddr}
 setenv set_static_nm setenv netmask \${static_netmask}
 setenv set_static_gw setenv gatewayip \${static_gateway}
@@ -24,7 +30,7 @@ then
     then
       echo "=== bootp succeeded -> netboot ==="
       run set_ip
-      run getdtb rundtb bootfromnet ramparam bootdtb
+      run getdtb rundtb bootfromnet ramparam addcons bootdtb
     else
       echo "=== netboot failed ==="
     fi