arm64: dts: rk3399: Sync v5.7-rc1 from Linux
Sync rk3399 dts(i) files from v5.7-rc1 linux-next. Reason: To get updated PCIe nodes and properties on respective dts(i) files. Summary: - sync won't include new board dts(i) - sync will add required files used on respective dts(i) - rk3399-puma-u-boot.dtsi spiflash label changed to norflash - move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi - move legacy max-frequency of sdhci into rk3399-u-boot.dtsi - update cross-ec-[keyboard|sbs].dtsi path as per U-Boot - keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki
Kever Yang
parent
96993d7c35
commit
167efc2c7a
@ -1,11 +1,8 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Keyboard dts fragment for devices that use cros-ec-keyboard
|
||||
*
|
||||
* Copyright (c) 2014 Google, Inc
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
@ -22,6 +19,7 @@
|
||||
MATRIX_KEY(0x00, 0x02, KEY_F1)
|
||||
MATRIX_KEY(0x00, 0x03, KEY_B)
|
||||
MATRIX_KEY(0x00, 0x04, KEY_F10)
|
||||
MATRIX_KEY(0x00, 0x05, KEY_RO)
|
||||
MATRIX_KEY(0x00, 0x06, KEY_N)
|
||||
MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
|
||||
MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
|
||||
@ -34,6 +32,7 @@
|
||||
MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
|
||||
MATRIX_KEY(0x01, 0x09, KEY_F9)
|
||||
MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
|
||||
MATRIX_KEY(0x01, 0x0c, KEY_HENKAN)
|
||||
|
||||
MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
|
||||
MATRIX_KEY(0x02, 0x01, KEY_TAB)
|
||||
@ -45,6 +44,7 @@
|
||||
MATRIX_KEY(0x02, 0x07, KEY_102ND)
|
||||
MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
|
||||
MATRIX_KEY(0x02, 0x09, KEY_F8)
|
||||
MATRIX_KEY(0x02, 0x0a, KEY_YEN)
|
||||
|
||||
MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
|
||||
MATRIX_KEY(0x03, 0x02, KEY_F2)
|
||||
@ -52,7 +52,9 @@
|
||||
MATRIX_KEY(0x03, 0x04, KEY_F5)
|
||||
MATRIX_KEY(0x03, 0x06, KEY_6)
|
||||
MATRIX_KEY(0x03, 0x08, KEY_MINUS)
|
||||
MATRIX_KEY(0x03, 0x09, KEY_F13)
|
||||
MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
|
||||
MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN)
|
||||
|
||||
MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
|
||||
MATRIX_KEY(0x04, 0x01, KEY_A)
|
||||
|
||||
@ -1,8 +1,45 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Smart battery dts fragment for devices that use cros-ec-sbs
|
||||
*
|
||||
* Copyright (c) 2015 Google, Inc
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
&i2c_tunnel {
|
||||
|
||||
@ -1,86 +1,18 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
|
||||
* Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3399 Evaluation Board";
|
||||
compatible = "rockchip,rk3399-evb", "rockchip,rk3399",
|
||||
"google,rk3399evb-rev2";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
vdd_center: vdd-center {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm3 0 25000 1>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-init-microvolt = <950000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vccsys: vccsys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vccsys";
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_host";
|
||||
gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc5v0_typec0: vcc5v0-typec0-en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_typec0";
|
||||
gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vcc5v0_typec1: vcc5v0-typec1-en {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_typec1";
|
||||
gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
power-supply = <&vccsys>;
|
||||
enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
|
||||
brightness-levels = <
|
||||
0 1 2 3 4 5 6 7
|
||||
8 9 10 11 12 13 14 15
|
||||
@ -116,18 +48,98 @@
|
||||
248 249 250 251 252 253 254 255>;
|
||||
default-brightness-level = <200>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_pin>;
|
||||
pwm-delay-us = <10000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
panel:panel {
|
||||
compatible = "simple-panel";
|
||||
power-supply = <&vcc33_lcd>;
|
||||
edp_panel: edp-panel {
|
||||
compatible ="lg,lp079qx1-sp0v";
|
||||
backlight = <&backlight>;
|
||||
/*enable-gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;*/
|
||||
status = "disabled";
|
||||
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vcc3v3_s0>;
|
||||
|
||||
port {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&edp_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vdd_center: vdd-center {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm3 0 25000 0>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&edp {
|
||||
status = "okay";
|
||||
force-hpd;
|
||||
|
||||
ports {
|
||||
edp_out: port@1 {
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
edp_out_panel: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -135,6 +147,244 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_log: DCDC_REG1 {
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_tp";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -147,15 +397,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
@ -164,6 +405,36 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -176,11 +447,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
vbus-supply = <&vcc5v0_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
@ -189,90 +455,26 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
vbus-supply = <&vcc5v0_typec1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-falling-time-ns = <50>;
|
||||
i2c-scl-rising-time-ns = <100>;
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
clock-output-names = "xin32k", "wifibt_32kin";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
reg = <0x1b>;
|
||||
rockchip,system-power-controller;
|
||||
#clock-cells = <1>;
|
||||
status = "okay";
|
||||
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vcc33_lcd: SWITCH_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc33_lcd";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mipi_dsi {
|
||||
status = "disabled";
|
||||
rockchip,panel = <&panel>;
|
||||
display-timings {
|
||||
timing0 {
|
||||
bits-per-pixel = <24>;
|
||||
clock-frequency = <160000000>;
|
||||
hfront-porch = <120>;
|
||||
hsync-len = <20>;
|
||||
hback-porch = <21>;
|
||||
hactive = <1200>;
|
||||
vfront-porch = <21>;
|
||||
vsync-len = <3>;
|
||||
vback-porch = <18>;
|
||||
vactive = <1920>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 21 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic_dvs2: pmic-dvs2 {
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<1 18 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -146,6 +146,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
/* On both Low speed and High speed expansion */
|
||||
cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
@ -1,19 +1,20 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly-RK3399 Board";
|
||||
compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
@ -63,6 +64,48 @@
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
dc_12v: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwrbtn>;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
|
||||
|
||||
work-led {
|
||||
label = "work";
|
||||
default-state = "on";
|
||||
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
diy-led {
|
||||
label = "diy";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
rt5640-sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rockchip,rt5640-codec";
|
||||
@ -102,15 +145,27 @@
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_drv>;
|
||||
pinctrl-0 = <&pcie_pwr_en>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
@ -120,32 +175,29 @@
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
@ -156,16 +208,7 @@
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <430000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-init-microvolt = <950000>;
|
||||
};
|
||||
|
||||
vccadc_ref: vccadc-ref {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -201,15 +244,22 @@
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x33>;
|
||||
rx_delay = <0x45>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -231,16 +281,16 @@
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc_sys>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
@ -301,12 +351,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_tp: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_tp";
|
||||
vcc2v8_dvp: LDO_REG2 {
|
||||
regulator-name = "vcc2v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
@ -324,8 +374,8 @@
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-name = "vcc_sd";
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
@ -382,7 +432,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
@ -412,7 +462,7 @@
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -429,7 +479,7 @@
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
@ -476,19 +526,16 @@
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -497,7 +544,7 @@
|
||||
|
||||
bt656-supply = <&vcc1v8_dvp>;
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
@ -509,7 +556,7 @@
|
||||
ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqn>;
|
||||
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -532,7 +579,7 @@
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_drv: pcie-drv {
|
||||
pcie_pwr_en: pcie-pwr-en {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
@ -570,10 +617,26 @@
|
||||
};
|
||||
|
||||
usb2 {
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_host_wake_l: wifi-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led_gpio: work_led-gpio {
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
diy_led_gpio: diy_led-gpio {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
@ -585,24 +648,70 @@
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vccadc_ref>;
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
/* WiFi & BT combo module Ampak AP6356S */
|
||||
bus-width = <4>;
|
||||
cap-sdio-irq;
|
||||
cap-sd-highspeed;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
|
||||
/* Power supply */
|
||||
vqmmc-supply = &vcc1v8_s3; /* IO line */
|
||||
vmmc-supply = &vcc_sdio; /* card's power */
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
brcm,drive-strength = <5>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
@ -662,3 +771,37 @@
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -18,11 +18,11 @@
|
||||
"google,bob", "google,gru", "rockchip,rk3399";
|
||||
|
||||
edp_panel: edp-panel {
|
||||
compatible = "boe,nv101wxmn51", "simple-panel";
|
||||
compatible = "boe,nv101wxmn51";
|
||||
backlight = <&backlight>;
|
||||
power-supply = <&pp3300_disp>;
|
||||
|
||||
ports {
|
||||
port {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&edp_out_panel>;
|
||||
};
|
||||
@ -68,12 +68,22 @@
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
cr50@0 {
|
||||
compatible = "google,cr50";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <5 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&h1_int_od_l>;
|
||||
spi-max-frequency = <800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
tpm {
|
||||
h1_int_od_l: h1-int-od-l {
|
||||
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -194,20 +194,25 @@
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
|
||||
17 18 19 20 21 22 23 24 25 26 27 28 29 30
|
||||
31 32 33 34 35 36 37 38 39 40 41 42 43 44
|
||||
45 46 47 48 49 50 51 52 53 54 55 56 57 58
|
||||
59 60 61 62 63 64 65 66 67 68 69 70 71 72
|
||||
73 74 75 76 77 78 79 80 81 82 83 84 85 86
|
||||
87 88 89 90 91 92 93 94 95 96 97 98 99 100>;
|
||||
default-brightness-level = <51>;
|
||||
enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&pp3300_disp>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bl_en>;
|
||||
pwm-delay-us = <10000>;
|
||||
};
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l>;
|
||||
|
||||
wake_on_bt: wake-on-bt {
|
||||
label = "Wake-on-Bluetooth";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WAKEUP>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ppvar_bigcpu {
|
||||
@ -232,7 +237,6 @@
|
||||
&edp {
|
||||
status = "okay";
|
||||
|
||||
rockchip,panel = <&edp_panel>;
|
||||
ports {
|
||||
edp_out: port@1 {
|
||||
reg = <1>;
|
||||
@ -287,11 +291,9 @@ ap_i2c_tp: &i2c5 {
|
||||
#pwm-cells = <1>;
|
||||
};
|
||||
|
||||
usbc_extcon1: extcon@1 {
|
||||
usbc_extcon1: extcon1 {
|
||||
compatible = "google,extcon-usbc-cros-ec";
|
||||
google,usb-port-id = <1>;
|
||||
|
||||
#extcon-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -361,27 +363,27 @@ ap_i2c_tp: &i2c5 {
|
||||
&pinctrl {
|
||||
discrete-regulators {
|
||||
pp1500_en: pp1500-en {
|
||||
rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp1800_audio_en: pp1800-audio-en {
|
||||
rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
|
||||
pp3000_en: pp3000-en {
|
||||
rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO
|
||||
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pp3300_disp_en: pp3300-disp-en {
|
||||
rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO
|
||||
rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_module_pd_l: wlan-module-pd-l {
|
||||
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
|
||||
&pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
@ -389,10 +391,10 @@ ap_i2c_tp: &i2c5 {
|
||||
|
||||
&wifi {
|
||||
wifi_perst_l: wifi-perst-l {
|
||||
rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wlan_host_wake_l: wlan-host-wake-l {
|
||||
rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -39,11 +39,25 @@
|
||||
};
|
||||
|
||||
edp_panel: edp-panel {
|
||||
compatible = "sharp,lq123p1jx31", "simple-panel";
|
||||
compatible = "sharp,lq123p1jx31";
|
||||
backlight = <&backlight>;
|
||||
power-supply = <&pp3300_disp>;
|
||||
|
||||
ports {
|
||||
panel-timing {
|
||||
clock-frequency = <266666667>;
|
||||
hactive = <2400>;
|
||||
hfront-porch = <48>;
|
||||
hback-porch = <84>;
|
||||
hsync-len = <32>;
|
||||
hsync-active = <0>;
|
||||
vactive = <1600>;
|
||||
vfront-porch = <3>;
|
||||
vback-porch = <120>;
|
||||
vsync-len = <10>;
|
||||
vsync-active = <0>;
|
||||
};
|
||||
|
||||
port {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&edp_out_panel>;
|
||||
};
|
||||
@ -118,13 +132,17 @@
|
||||
map0 {
|
||||
trip = <&ppvar_bigcpu_alert>;
|
||||
cooling-device =
|
||||
<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <4096>;
|
||||
};
|
||||
map1 {
|
||||
trip = <&ppvar_bigcpu_alert>;
|
||||
cooling-device =
|
||||
<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
contribution = <1024>;
|
||||
};
|
||||
};
|
||||
@ -286,24 +304,24 @@ ap_i2c_dig: &i2c2 {
|
||||
digitizer {
|
||||
/* Has external pullup */
|
||||
cpu1_dig_irq_l: cpu1-dig-irq-l {
|
||||
rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/* Has external pullup */
|
||||
cpu1_dig_pdct_l: cpu1-dig-pdct-l {
|
||||
rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
discrete-regulators {
|
||||
cpu3_pen_pwr_en: cpu3-pen-pwr-en {
|
||||
rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pen {
|
||||
cpu1_pen_eject: cpu1-pen-eject {
|
||||
rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -11,13 +11,7 @@
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
u-boot,dm-pre-reloc;
|
||||
stdout-path = "serial2:115200n8";
|
||||
u-boot,spl-boot-order = &spi_flash;
|
||||
};
|
||||
|
||||
config {
|
||||
u-boot,spl-payload-offset = <0x40000>;
|
||||
};
|
||||
|
||||
/*
|
||||
@ -268,17 +262,11 @@
|
||||
pp5000_usb_a_vbus: pp5000 {
|
||||
};
|
||||
|
||||
gpio_keys: gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l>;
|
||||
|
||||
wake_on_bt: wake-on-bt {
|
||||
label = "Wake-on-Bluetooth";
|
||||
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WAKEUP>;
|
||||
wakeup-source;
|
||||
};
|
||||
ap_rtc_clk: ap-rtc-clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
clock-output-names = "xin32k";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
max98357a: max98357a {
|
||||
@ -549,8 +537,7 @@ ap_i2c_audio: &i2c8 {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-1 = <&spi1_sleep>;
|
||||
|
||||
spi_flash: spiflash@0 {
|
||||
u-boot,dm-pre-reloc;
|
||||
spiflash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
|
||||
@ -565,16 +552,12 @@ ap_i2c_audio: &i2c8 {
|
||||
|
||||
&spi5 {
|
||||
status = "okay";
|
||||
spi-activate-delay = <100>;
|
||||
spi-max-frequency = <3000000>;
|
||||
spi-deactivate-delay = <200>;
|
||||
|
||||
cros_ec: ec@0 {
|
||||
compatible = "google,cros-ec-spi";
|
||||
reg = <0>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ec_ap_int_l>;
|
||||
spi-max-frequency = <3000000>;
|
||||
@ -586,11 +569,9 @@ ap_i2c_audio: &i2c8 {
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
usbc_extcon0: extcon@0 {
|
||||
usbc_extcon0: extcon0 {
|
||||
compatible = "google,extcon-usbc-cros-ec";
|
||||
google,usb-port-id = <0>;
|
||||
|
||||
#extcon-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -692,29 +673,29 @@ ap_i2c_audio: &i2c8 {
|
||||
|
||||
backlight-enable {
|
||||
bl_en: bl-en {
|
||||
rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
cros-ec {
|
||||
ec_ap_int_l: ec-ap-int-l {
|
||||
rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
discrete-regulators {
|
||||
sd_io_pwr_en: sd-io-pwr-en {
|
||||
rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
|
||||
rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sd_pwr_1800_sel: sd-pwr-1800-sel {
|
||||
rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
|
||||
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
|
||||
sd_slot_pwr_en: sd-slot-pwr-en {
|
||||
rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
|
||||
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
|
||||
&pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
@ -722,17 +703,17 @@ ap_i2c_audio: &i2c8 {
|
||||
codec {
|
||||
/* Has external pullup */
|
||||
headset_int_l: headset-int-l {
|
||||
rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
mic_int: mic-int {
|
||||
rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
max98357a {
|
||||
sdmode_en: sdmode-en {
|
||||
rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -743,7 +724,7 @@ ap_i2c_audio: &i2c8 {
|
||||
* to hack this as gpio, so the EP could be able to
|
||||
* de-assert it along and make ClockPM(CPM) work.
|
||||
*/
|
||||
rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -754,20 +735,20 @@ ap_i2c_audio: &i2c8 {
|
||||
*/
|
||||
sdmmc_bus4: sdmmc-bus4 {
|
||||
rockchip,pins =
|
||||
<4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
|
||||
<4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
|
||||
<4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
|
||||
<4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
|
||||
<4 RK_PB0 1 &pcfg_pull_none_8ma>,
|
||||
<4 RK_PB1 1 &pcfg_pull_none_8ma>,
|
||||
<4 RK_PB2 1 &pcfg_pull_none_8ma>,
|
||||
<4 RK_PB3 1 &pcfg_pull_none_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_clk: sdmmc-clk {
|
||||
rockchip,pins =
|
||||
<4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
|
||||
<4 RK_PB4 1 &pcfg_pull_none_8ma>;
|
||||
};
|
||||
|
||||
sdmmc_cmd: sdmmc-cmd {
|
||||
rockchip,pins =
|
||||
<4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
|
||||
<4 RK_PB5 1 &pcfg_pull_none_8ma>;
|
||||
};
|
||||
|
||||
/*
|
||||
@ -781,12 +762,12 @@ ap_i2c_audio: &i2c8 {
|
||||
*/
|
||||
sdmmc_cd: sdmmc-cd {
|
||||
rockchip,pins =
|
||||
<0 7 RK_FUNC_1 &pcfg_pull_none>;
|
||||
<0 RK_PA7 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
/* This is where we actually hook up CD; has external pull */
|
||||
sdmmc_cd_gpio: sdmmc-cd-gpio {
|
||||
rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -796,47 +777,47 @@ ap_i2c_audio: &i2c8 {
|
||||
* Pull down SPI1 CLK/CS/RX/TX during suspend, to
|
||||
* prevent leakage.
|
||||
*/
|
||||
rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 10 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 7 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 8 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
|
||||
<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen {
|
||||
touch_int_l: touch-int-l {
|
||||
rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
touch_reset_l: touch-reset-l {
|
||||
rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
trackpad {
|
||||
ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
|
||||
rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
|
||||
trackpad_int_l: trackpad-int-l {
|
||||
rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi: wifi {
|
||||
wlan_module_reset_l: wlan-module-reset-l {
|
||||
rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
/* Kevin has an external pull up, but Gru does not */
|
||||
rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
write-protect {
|
||||
ap_fw_wp: ap-fw-wp {
|
||||
rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -654,9 +654,12 @@
|
||||
sd-uhs-sdr104;
|
||||
vqmmc-supply = <&vcc1v8_s3>;
|
||||
vmmc-supply = <&vccio_sd>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
@ -42,14 +42,14 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
vcc3v3_lan: vcc3v3-lan {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-name = "vcc3v3_lan";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc5v_adp>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vim-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
@ -83,14 +83,14 @@
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_lan: vcc3v3-lan {
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_lan";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vim-supply = <&vcc3v3_sys>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc5v_adp>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
@ -510,6 +510,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
@ -522,14 +530,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -52,13 +52,58 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ir_rx>;
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
/*
|
||||
* With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
|
||||
* work out to 0, ~1200, ~3000, and 5000RPM respectively.
|
||||
*/
|
||||
cooling-levels = <0 12 18 255>;
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vcc12v0_sys>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
cpu_warm: cpu_warm {
|
||||
temperature = <55000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
cpu_hot: cpu_hot {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map2 {
|
||||
trip = <&cpu_warm>;
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
trip = <&cpu_hot>;
|
||||
cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
num-lanes = <4>;
|
||||
vpcie3v3-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ir {
|
||||
ir_rx: ir-rx {
|
||||
/* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_1 &pcfg_pull_none>;
|
||||
rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -48,7 +48,7 @@
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
vcc1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
@ -71,6 +71,27 @@
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
|
||||
* drives the enable pin, but we can't quite model that.
|
||||
*/
|
||||
vcca0v9_s3: vcca0v9-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vcca0v9_s3";
|
||||
vin-supply = <&vcc1v8_s3>;
|
||||
};
|
||||
|
||||
/* As above, actually supplied by vcc3v3_sys */
|
||||
vcca1v8_s3: vcca1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcca1v8_s3";
|
||||
vin-supply = <&vcc1v8_s3>;
|
||||
};
|
||||
|
||||
vbus_typec: vbus-typec {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
@ -148,15 +169,28 @@
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
clock_in_out = "input";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
|
||||
phy-handle = <&rtl8211e>;
|
||||
phy-mode = "rgmii";
|
||||
phy-supply = <&vcc3v3_s3>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8211e: phy@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
@ -171,6 +205,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <160>;
|
||||
@ -446,6 +484,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
bt656-supply = <&vcc_1v8>;
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
@ -464,7 +506,9 @@
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
max-link-speed = <2>;
|
||||
num-lanes = <4>;
|
||||
num-lanes = <2>;
|
||||
vpcie0v9-supply = <&vcca0v9_s3>;
|
||||
vpcie1v8-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -481,6 +525,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
phy {
|
||||
phy_intb: phy-intb {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_rstb: phy-rstb {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
cpu_b_sleep: cpu-b-sleep {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
|
||||
@ -136,13 +136,13 @@
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_typec0: vcc5v0-typec0-regulator {
|
||||
vbus_typec: vbus-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_typec0_en>;
|
||||
regulator-name = "vcc5v0_typec0";
|
||||
pinctrl-0 = <&vcc5v0_typec_en>;
|
||||
regulator-name = "vbus_typec";
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
@ -202,14 +202,27 @@
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc3v3_s3>;
|
||||
phy-mode = "rgmii";
|
||||
phy-handle = <&rtl8211e>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
compatible = "snps,dwmac-mdio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rtl8211e: phy@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <30000>;
|
||||
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
@ -419,6 +432,8 @@
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&cpu_b_sleep>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
@ -436,6 +451,8 @@
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpu_sleep>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
@ -472,6 +489,7 @@
|
||||
compatible = "asahi-kasei,ak09911";
|
||||
reg = <0x0c>;
|
||||
vdd-supply = <&vcc3v3_s3>;
|
||||
vid-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
mpu6500@68 {
|
||||
@ -504,6 +522,16 @@
|
||||
pinctrl-0 = <&light_int_l>;
|
||||
vdd-supply = <&vcc3v3_s3>;
|
||||
};
|
||||
|
||||
fusb302@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&chg_cc_int_l>;
|
||||
vbus-supply = <&vbus_typec>;
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
@ -526,7 +554,25 @@
|
||||
};
|
||||
};
|
||||
|
||||
phy {
|
||||
phy_intb: phy-intb {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
phy_rstb: phy-rstb {
|
||||
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
cpu_b_sleep: cpu-b-sleep {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
gpu_sleep: gpu-sleep {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
@ -536,7 +582,7 @@
|
||||
sd {
|
||||
sdmmc0_pwr_h: sdmmc0-pwr-h {
|
||||
rockchip,pins =
|
||||
<RK_GPIO0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
<0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -546,7 +592,7 @@
|
||||
<4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_typec0_en: vcc5v0-typec0-en {
|
||||
vcc5v0_typec_en: vcc5v0-typec-en {
|
||||
rockchip,pins =
|
||||
<1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
@ -595,6 +641,12 @@
|
||||
rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb302 {
|
||||
chg_cc_int_l: chg-cc-int-l {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
@ -631,9 +683,12 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
@ -676,7 +731,7 @@
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
phy-supply = <&vcc5v0_typec0>;
|
||||
phy-supply = <&vbus_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -707,12 +762,14 @@
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -13,7 +13,7 @@
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
u-boot,spl-boot-order = \
|
||||
"same-as-spl", &spiflash, &sdhci, &sdmmc;
|
||||
"same-as-spl", &norflash, &sdhci, &sdmmc;
|
||||
};
|
||||
|
||||
aliases {
|
||||
@ -21,10 +21,23 @@
|
||||
spi1 = &spi5;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&bios_enable {
|
||||
u-boot,dm-pre-reloc;
|
||||
/*
|
||||
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
|
||||
* eMMC and SPI flash powered-down initially (in fact it keeps the
|
||||
* reset signal asserted). Even though it is an enable signal, we
|
||||
* model this as a regulator.
|
||||
*/
|
||||
bios_enable: bios_enable {
|
||||
compatible = "regulator-fixed";
|
||||
u-boot,dm-pre-reloc;
|
||||
regulator-name = "bios_enable";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
@ -35,6 +48,6 @@
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&spiflash {
|
||||
&norflash {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
@ -1,30 +1,74 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
||||
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
|
||||
*/
|
||||
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Theobroma Systems RK3399-Q7 SoM";
|
||||
compatible = "tsd,rk3399-q7", "tsd,puma", "rockchip,rk3399";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins_puma>;
|
||||
pinctrl-0 = <&led_pin_module>;
|
||||
|
||||
module_led {
|
||||
module-led {
|
||||
label = "module_led";
|
||||
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
sd_card_led {
|
||||
label = "sd_card_led";
|
||||
gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
/*
|
||||
* Overwrite the opp-table for CPUB as this board uses a different
|
||||
* regulator (FAN53555) that only allows 10mV steps and therefore
|
||||
* can't reach the operation point target voltages from rk3399-opp.dtsi
|
||||
*/
|
||||
/delete-node/ opp-table1;
|
||||
cluster1_opp: opp-table1 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <800000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <830000>;
|
||||
opp-suspend;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <880000>;
|
||||
};
|
||||
opp04 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <950000>;
|
||||
};
|
||||
opp05 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1030000>;
|
||||
};
|
||||
opp06 {
|
||||
opp-hz = /bits/ 64 <1608000000>;
|
||||
opp-microvolt = <1100000>;
|
||||
};
|
||||
opp07 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <1200000>;
|
||||
};
|
||||
opp08 {
|
||||
opp-hz = /bits/ 64 <1992000000>;
|
||||
opp-microvolt = <1230000>;
|
||||
turbo-mode;
|
||||
};
|
||||
};
|
||||
|
||||
@ -35,78 +79,14 @@
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
dw_hdmi_audio: dw-hdmi-audio {
|
||||
status = "enabled";
|
||||
compatible = "rockchip,dw-hdmi-audio";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
hdmi_codec: hdmi-codec {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "HDMI-CODEC";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s2>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi_sound: hdmi-sound {
|
||||
status = "disabled";
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,name = "rockchip,hdmi";
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s2>;
|
||||
};
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&hdmi>;
|
||||
};
|
||||
};
|
||||
|
||||
usbhub_enable: usbhub_enable {
|
||||
vcc1v2_phy: vcc1v2-phy {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usbhub_enable";
|
||||
enable-active-low;
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&host_vbus_drv>;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module
|
||||
* eMMC and SPI flash powered-down initially (in fact it keeps the
|
||||
* reset signal asserted). Even though it is an enable signal, we
|
||||
* model this as a regulator.
|
||||
*/
|
||||
bios_enable: bios_enable {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "bios_enable";
|
||||
enable-active-high;
|
||||
gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
regulator-name = "vcc1v2_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vccadc_ref: vccadc-ref {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
@ -116,16 +96,18 @@
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: vcc5v0-otg-regulator {
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-low;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&otg_vbus_drv>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
@ -136,48 +118,55 @@
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_phy: vcc-phy-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <950000>;
|
||||
};
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
drive-impedance-ohm = <33>;
|
||||
};
|
||||
|
||||
&gmac {
|
||||
phy-supply = <&vcc_phy>;
|
||||
phy-mode = "rgmii";
|
||||
clock_in_out = "input";
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <2 10000 50000>;
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc1v2_phy>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x10>;
|
||||
rx_delay = <0x10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
#sound-dai-cells = <0>;
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -187,37 +176,17 @@
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_gpu: vdd_gpu {
|
||||
status = "okay";
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1230000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_LOW>; // TODO check interrupt?
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
@ -234,44 +203,44 @@
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
@ -279,32 +248,32 @@
|
||||
};
|
||||
|
||||
vcc_ldo1: LDO_REG1 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_ldo1";
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_hdmi: LDO_REG2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc1v8_hdmi";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
@ -312,11 +281,11 @@
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
@ -324,79 +293,105 @@
|
||||
};
|
||||
|
||||
vcc_ldo5: LDO_REG5 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ldo5";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-name = "vcc_ldo5";
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ldo6: LDO_REG6 {
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_ldo6";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-name = "vcc_ldo6";
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_hdmi: LDO_REG7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc0v9_hdmi";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vcc0v9_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_efuse: LDO_REG8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc_efuse";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_efuse";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1230000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
fan: fan@18 {
|
||||
compatible = "ti,amc6821";
|
||||
reg = <0x18>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
rtc_twi: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu_b: vdd_cpu_b {
|
||||
status = "okay";
|
||||
vdd_cpu_b: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
vsel-gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-compatible = "fan53555-reg";
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1230000>;
|
||||
@ -404,48 +399,36 @@
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-state = <3>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
pinctrl-0 = <&i2s0_2ch_bus>;
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
rockchip,i2s-broken-burst-len;
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
#sound-dai-cells = <0>;
|
||||
status = "okay";
|
||||
/*
|
||||
* As Q7 does not specify neither a global nor a RX clock for I2S these
|
||||
* signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
|
||||
* Therefore we have to redefine the i2s0_2ch_bus definition to prevent
|
||||
* conflicts.
|
||||
*/
|
||||
&i2s0_2ch_bus {
|
||||
rockchip,pins =
|
||||
<3 RK_PD0 1 &pcfg_pull_none>,
|
||||
<3 RK_PD2 1 &pcfg_pull_none>,
|
||||
<3 RK_PD3 1 &pcfg_pull_none>,
|
||||
<3 RK_PD7 1 &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
bt656-supply = <&vcc_1v8>; /* bt656_gpio2ab_ms */
|
||||
audio-supply = <&vcc_1v8>; /* audio_gpio3d4a_ms */
|
||||
sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
|
||||
gpio1830-supply = <&vcc_1v8>; /* gpio1833_gpio4cd_ms */
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
|
||||
assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
|
||||
assigned-clock-rates = <100000000>;
|
||||
ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqn>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
bt656-supply = <&vcc_1v8>;
|
||||
audio-supply = <&vcc_1v8>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
gpio1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
@ -453,185 +436,99 @@
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
supports-emmc;
|
||||
non-removable;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
clock-frequency = <150000000>;
|
||||
max-frequency = <40000000>;
|
||||
supports-sd;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
num-slots = <1>;
|
||||
vqmmc-supply = <&vcc_sd>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
tsd,usb-port-power = "usbhub_enable";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
/* Pins that are not explicitely used by any devices */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&puma_pin_hog>;
|
||||
|
||||
hog {
|
||||
puma_pin_hog: puma_pin_hog {
|
||||
i2c8 {
|
||||
i2c8_xfer_a: i2c8-xfer {
|
||||
rockchip,pins =
|
||||
/* We need pull-ups on Q7 buttons */
|
||||
<RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, /* LID_BTN# */
|
||||
<RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>, /* BATLOW# */
|
||||
<RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>, /* SLP_BTN# */
|
||||
<RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>; /* BIOS_DISABLE# */
|
||||
<1 RK_PC4 1 &pcfg_pull_up>,
|
||||
<1 RK_PC5 1 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_pin_module: led-module-gpio {
|
||||
rockchip,pins =
|
||||
<2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
<1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds_pins_puma: led_pins@0 {
|
||||
rockchip,pins =
|
||||
<RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
otg_vbus_drv: otg-vbus-drv {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
host_vbus_drv: host-vbus-drv {
|
||||
rockchip,pins =
|
||||
<RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c8 {
|
||||
i2c8_xfer_a: i2c8-xfer {
|
||||
rockchip,pins =
|
||||
<RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>,
|
||||
<RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>;
|
||||
<4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c6_xfer {
|
||||
/* Enable pull-ups, the pins would float otherwise. */
|
||||
rockchip,pins =
|
||||
<RK_GPIO2 RK_PB2 RK_FUNC_2 &pcfg_pull_up>,
|
||||
<RK_GPIO2 RK_PB1 RK_FUNC_2 &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
rtc_twi: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
fan: fan@18 {
|
||||
compatible = "ti,amc6821";
|
||||
reg = <0x18>;
|
||||
cooling-min-state = <0>;
|
||||
cooling-max-state = <9>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
vqmmc-supply = <&vcc_sd>;
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
spiflash: w25q32dw@0 {
|
||||
norflash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <49500000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi5 {
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -26,7 +26,33 @@
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* should be placed inside mp8859, but not until mp8859 has
|
||||
* its own dt-binding.
|
||||
*/
|
||||
&dc_12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <&vcc_vbus_typec0>;
|
||||
};
|
||||
|
||||
&vdd_log {
|
||||
regulator-min-microvolt = <430000>;
|
||||
regulator-init-microvolt = <950000>;
|
||||
};
|
||||
|
||||
&vcc5v0_host {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&vcc_sys {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&vcc_sdio {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
@ -8,6 +8,5 @@
|
||||
|
||||
/ {
|
||||
model = "Firefly ROC-RK3399-PC Board";
|
||||
compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc",
|
||||
"rockchip,rk3399";
|
||||
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
|
||||
};
|
||||
|
||||
@ -110,20 +110,6 @@
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* should be placed inside mp8859, but not until mp8859 has
|
||||
* its own dt-binding.
|
||||
*/
|
||||
dc_12v: mp8859-dcdc1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <&vcc_vbus_typec0>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
@ -176,7 +162,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
@ -198,7 +183,6 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_sys_en>;
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
@ -392,7 +376,6 @@
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
@ -549,6 +532,24 @@
|
||||
vbus-supply = <&vcc_vbus_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mp8859: regulator@66 {
|
||||
compatible = "mps,mp8859";
|
||||
reg = <0x66>;
|
||||
dc_12v: mp8859_dcdc {
|
||||
regulator-name = "dc_12v";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_vbus_typec0>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <12000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
|
||||
@ -25,6 +25,15 @@
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
@ -44,6 +53,16 @@
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc_0v9: vcc-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
@ -157,12 +176,22 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
@ -444,13 +473,60 @@
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
max-link-speed = <2>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-0 = <&pcie_clkreqnb_cpm>;
|
||||
pinctrl-names = "default";
|
||||
vpcie0v9-supply = <&vcc_0v9>;
|
||||
vpcie1v8-supply = <&vcc_1v8>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_pwr_en: pcie-pwr-en {
|
||||
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio0 {
|
||||
sdio0_bus4: sdio0-bus4 {
|
||||
rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
|
||||
<2 RK_PC5 1 &pcfg_pull_up_20ma>,
|
||||
<2 RK_PC6 1 &pcfg_pull_up_20ma>,
|
||||
<2 RK_PC7 1 &pcfg_pull_up_20ma>;
|
||||
};
|
||||
|
||||
sdio0_cmd: sdio0-cmd {
|
||||
rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
|
||||
};
|
||||
|
||||
sdio0_clk: sdio0-clk {
|
||||
rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
@ -476,6 +552,16 @@
|
||||
rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_l: wifi-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
@ -488,6 +574,32 @@
|
||||
vref-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
bus-width = <4>;
|
||||
clock-frequency = <50000000>;
|
||||
cap-sdio-irq;
|
||||
cap-sd-highspeed;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_host_wake_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
@ -551,6 +663,23 @@
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -114,6 +114,55 @@
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
/* On Low speed expansion (LS-SPI0) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi4 {
|
||||
/* On High speed expansion (HS-SPI1) */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&thermal_zones {
|
||||
cpu_thermal: cpu {
|
||||
polling-delay-passive = <100>;
|
||||
polling-delay = <1000>;
|
||||
thermal-sensors = <&tsadc 0>;
|
||||
sustainable-power = <1550>;
|
||||
|
||||
trips {
|
||||
cpu_alert0: cpu_alert0 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_alert1: cpu_alert1 {
|
||||
temperature = <75000>;
|
||||
hysteresis = <2000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
cpu_crit: cpu_crit {
|
||||
temperature = <95000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
map0 {
|
||||
|
||||
trip = <&cpu_alert1>;
|
||||
cooling-device =
|
||||
<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
||||
<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
@ -76,6 +76,15 @@
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc_0v9: vcc-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_0v9";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
@ -384,6 +393,8 @@
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_clkreqn_cpm>;
|
||||
vpcie0v9-supply = <&vcc_0v9>;
|
||||
vpcie1v8-supply = <&vcca_1v8>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -531,7 +542,7 @@
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
clock-frequency = <100000000>;
|
||||
clock-freq-min-max = <100000 100000000>;
|
||||
max-frequency = <100000000>;
|
||||
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
|
||||
@ -2,752 +2,29 @@
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
|
||||
* Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include "rk3399-rockpro64.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Pine64 RockPro64";
|
||||
compatible = "pine64,rockpro64", "rockchip,rk3399";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwrbtn>;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
|
||||
|
||||
work-led {
|
||||
label = "work";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
diy-led {
|
||||
label = "diy";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pwr_en>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_typec: vcc5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_typec_en>;
|
||||
regulator-name = "vcc5v0_typec";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1700000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca_1v8>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_touch: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_touch";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG3 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
model = "Pine64 RockPro64 v2.1";
|
||||
compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
es8316: codec@11 {
|
||||
compatible = "everest,es8316";
|
||||
reg = <0x11>;
|
||||
clocks = <&cru SCLK_I2S_8CH_OUT>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb0: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-supply = <&vcc5v0_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
bt656-supply = <&vcc1v8_dvp>;
|
||||
audio-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_perst>;
|
||||
vpcie12v-supply = <&vcc12v_dcin>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
buttons {
|
||||
pwrbtn: pwrbtn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb302x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led_gpio: work_led-gpio {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
diy_led_gpio: diy_led-gpio {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_perst: pcie-perst {
|
||||
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_pwr_en: pcie-pwr-en {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
vcc5v0_typec_en: vcc5v0_typec_en {
|
||||
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
port {
|
||||
es8316_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s1_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
797
arch/arm/dts/rk3399-rockpro64.dtsi
Normal file
797
arch/arm/dts/rk3399-rockpro64.dtsi
Normal file
@ -0,0 +1,797 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwrbtn>;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
|
||||
|
||||
work-led {
|
||||
label = "work";
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
diy-led {
|
||||
label = "diy";
|
||||
default-state = "off";
|
||||
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
fan: pwm-fan {
|
||||
compatible = "pwm-fan";
|
||||
#cooling-cells = <2>;
|
||||
fan-supply = <&vcc12v_dcin>;
|
||||
pwms = <&pwm1 0 50000 0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rockchip,rk3399";
|
||||
dais = <&i2s1_p0>;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pwr_en>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_typec: vcc5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_typec_en>;
|
||||
regulator-name = "vcc5v0_typec";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc12v_dcin>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1700000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcca_1v8>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_dvp: LDO_REG1 {
|
||||
regulator-name = "vcc1v8_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v0_touch: LDO_REG2 {
|
||||
regulator-name = "vcc3v0_touch";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG3 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG7 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb0: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-supply = <&vcc5v0_typec>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
|
||||
i2s1_p0: port {
|
||||
i2s1_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8316_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
|
||||
bt656-supply = <&vcc1v8_dvp>;
|
||||
audio-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
num-lanes = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_perst>;
|
||||
vpcie12v-supply = <&vcc12v_dcin>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bt {
|
||||
bt_enable_h: bt-enable-h {
|
||||
rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_host_wake_l: bt-host-wake-l {
|
||||
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
bt_wake_l: bt-wake-l {
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
buttons {
|
||||
pwrbtn: pwrbtn {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb302x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
work_led_gpio: work_led-gpio {
|
||||
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
diy_led_gpio: diy_led-gpio {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pcie {
|
||||
pcie_perst: pcie-perst {
|
||||
rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
pcie_pwr_en: pcie-pwr-en {
|
||||
rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
vcc5v0_typec_en: vcc5v0_typec_en {
|
||||
rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "lpo";
|
||||
device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
|
||||
shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
|
||||
vbat-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_1v8>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
@ -85,6 +85,7 @@
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
max-frequency = <200000000>;
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user