Merge branch 'master' of git://git.denx.de/u-boot-net

board/MAI/AmigaOneG3SE/AmigaOneG3SE.c

@@ -26,6 +26,7 @@
 #include <common.h>
 #include <command.h>
 #include <pci.h>
+#include <netdev.h>
 #include "articiaS.h"
 #include "memio.h"
 #include "via686.h"
@@ -111,3 +112,11 @@ void pci_init_board (void)
 	articiaS_pci_init ();
 #endif
 }
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_3COM)
+	eth_3com_initialize(bis);
+#endif
+	return 0;
+}

board/MAI/AmigaOneG3SE/enet.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>
 

board/Marvell/db64360/db64360.c

@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "mpsc.h"
@@ -929,3 +930,8 @@ void board_prebootm_init ()
 	icache_disable ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/Marvell/db64460/db64460.c

@@ -33,6 +33,7 @@
 #include "../include/pci.h"
 #include "../include/mv_gen_reg.h"
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "mpsc.h"
@@ -929,3 +930,8 @@ void board_prebootm_init ()
 	icache_disable ();
 	dcache_disable ();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/a3000/a3000.c

@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -109,3 +110,9 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+

board/amcc/katmai/katmai.c

@@ -27,6 +27,7 @@
 #include <i2c.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
@@ -447,3 +448,8 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/amcc/taihu/taihu.c

@@ -28,6 +28,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <spi.h>
+#include <netdev.h>
 #include <asm/gpio.h>
 
 extern int lcd_init(void);
@@ -200,3 +201,8 @@ int pci_pre_init(struct pci_controller *hose)
 	return 1;
 }
 #endif /* CONFIG_PCI */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/amcc/taishan/taishan.c

@@ -27,6 +27,7 @@
 #include <asm/processor.h>
 #include <spd_sdram.h>
 #include <ppc4xx_enet.h>
+#include <netdev.h>
 
 #ifdef CFG_INIT_SHOW_RESET_REG
 void show_reset_reg(void);
@@ -311,3 +312,8 @@ int post_hotkeys_pressed(void)
 	return (ctrlc());
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/amcc/yucca/yucca.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <ppc4xx.h>
 #include <i2c.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/4xx_pcie.h>
@@ -952,3 +953,8 @@ int onboard_pci_arbiter_selected(int core_pci)
 #endif
 	return (BOARD_OPTION_NOT_SELECTED);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/amirix/ap1000/ap1000.c

@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 #include "powerspan.h"
@@ -697,3 +698,9 @@ U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
 	    "swrecon - trigger a board reconfigure to the software selected configuration\n",
 	    "\n"
 	    "    - trigger a board reconfigure to the software selected configuration\n");
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+

board/atmel/at91cap9adk/at91cap9adk.c

@@ -30,11 +30,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 #define MP_BLOCK_3_BASE	0xFDF00000
 
@@ -376,3 +378,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}

board/atmel/at91sam9260ek/at91sam9260ek.c

@@ -30,9 +30,11 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -248,3 +250,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}

board/atmel/at91sam9263ek/at91sam9263ek.c

@@ -31,11 +31,13 @@
 #include <asm/arch/at91_rstc.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
 #include <lcd.h>
 #include <atmel_lcdc.h>
 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
 #include <net.h>
 #endif
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -308,3 +310,12 @@ void reset_phy(void)
 #endif
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#ifdef CONFIG_MACB
+	rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
+#endif
+	return rc;
+}

board/atmel/atngw100/atngw100.c

@@ -26,6 +26,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -93,8 +94,6 @@ void board_init_info(void)
 	gd->bd->bi_phy_id[1] = 0x03;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {

board/atmel/atstk1000/atstk1000.c

@@ -26,6 +26,7 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -116,8 +117,6 @@ void board_init_info(void)
 	gd->bd->bi_phy_id[1] = 0x11;
 }
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bi)
 {

board/bc3450/bc3450.c

@@ -33,6 +33,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
@@ -669,3 +670,9 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SM501 */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/bf537-stamp/bf537-stamp.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <net.h>
 #include <asm/mach-common/bits/bootrom.h>
+#include <netdev.h>
 
 /**
  * is_valid_ether_addr - Determine if the given Ethernet address is valid
@@ -156,8 +157,6 @@ int misc_init_r(void)
 
 #if defined(CONFIG_BFIN_MAC)
 
-extern int bfin_EMAC_initialize(bd_t *bis);
-
 int board_eth_init(bd_t *bis)
 {
 	return bfin_EMAC_initialize(bis);

board/cpc45/cpc45.c

@@ -27,6 +27,7 @@
 #include <asm/io.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 int sysControlDisplay(int digit, uchar ascii_code);
 extern void Plx9030Init(void);
@@ -273,3 +274,8 @@ void ide_led (uchar led, uchar status)
 	writeb(val, BCSR_BASE + 0x04);
 }
 # endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/cpu87/cpu87.c

@@ -26,6 +26,7 @@
 #include <mpc8260.h>
 #include "cpu87.h"
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -339,3 +340,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/cu824/cu824.c

@@ -28,6 +28,7 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <pci.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -91,3 +92,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/eXalion/eXalion.c

@@ -30,6 +30,7 @@
 #include <asm/io.h>
 #include <pci.h>
 #include <ide.h>
+#include <netdev.h>
 #include "piix_pci.h"
 #include "eXalion.h"
 
@@ -290,3 +291,8 @@ void pci_init_board (void)
 {
 	pci_mpc824x_init (&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/earthlcd/favr-32-ezkit/favr-32-ezkit.c

@@ -18,6 +18,7 @@
  * Place, Suite 330, Boston, MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -87,8 +88,6 @@ void board_init_info(void)
 }
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 int board_eth_init(bd_t *bi)
 {
 	return macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);

board/eltec/bab7xx/bab7xx.c

@@ -30,6 +30,7 @@
 #include <74xx_7xx.h>
 #include <ns87308.h>
 #include <video_fb.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -244,3 +245,8 @@ void video_get_info_str (int line_number, char *info)
 #endif
 
 /*---------------------------------------------------------------------------*/
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/eltec/elppc/elppc.c

@@ -25,6 +25,7 @@
 #include <command.h>
 #include <mpc106.h>
 #include <video_fb.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -172,3 +173,8 @@ void video_get_info_str (int line_number, char *info)
 	return;
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/esd/adciop/adciop.c

@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include "adciop.h"
 
 /* ------------------------------------------------------------------------- */
@@ -95,3 +96,8 @@ int testdram (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/esd/cpci5200/cpci5200.c

@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -259,6 +260,11 @@ void init_ata_reset(void)
 	}
 }
 
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
 int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	unsigned int addr;

board/esd/dasa_sim/dasa_sim.c

@@ -22,6 +22,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include "dasa_sim.h"
 
 /* ------------------------------------------------------------------------- */
@@ -222,3 +223,8 @@ int testdram (void)
 }
 
 /* ------------------------------------------------------------------------- */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/esd/mecp5200/mecp5200.c

@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -259,3 +260,8 @@ void init_power_switch(void)
 		__asm__ volatile ("sync");
 	}
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/esd/pf5200/pf5200.c

@@ -32,6 +32,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -264,6 +265,11 @@ void init_power_switch(void)
 	__asm__ volatile ("sync");
 }
 
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
+
 void power_set_reset(int power)
 {
 	debug("ide_set_reset(%d)\n", power);

board/etin/debris/debris.c

@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -177,3 +178,8 @@ int misc_init_r(void)
 			(char*)&gd->bd->bi_enetaddr[0], 6);
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/etin/kvme080/kvme080.c

@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 int checkboard(void)
@@ -191,3 +192,8 @@ void nvram_write(long dest, const void *src, size_t count)
 		asm volatile("sync");
 	}
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/evb64260/eth.c

@@ -27,6 +27,7 @@ Skeleton NIC driver for Etherboot
 #include <asm/cache.h>
 #include <miiphy.h>
 #include <net.h>
+#include <netdev.h>
 
 #include "eth.h"
 #include "eth_addrtbl.h"

board/evb64260/evb64260.c

@@ -31,6 +31,7 @@
 #include <galileo/pci.h>
 #include <galileo/gt64260R.h>
 #include <net.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include "eth.h"
@@ -248,7 +249,6 @@ int board_early_init_f (void)
 		sram_boot = 1;
 #endif
 
-	if (!sram_boot)
 		memoryMapDeviceSpace(DEVICE0, CFG_DEV0_SPACE, CFG_DEV0_SIZE);
 
 	memoryMapDeviceSpace(DEVICE1, CFG_DEV1_SPACE, CFG_DEV1_SIZE);
@@ -443,3 +443,9 @@ display_mem_map(void)
     printf(" BOOT:  base - 0x%08x\tsize - %dM bytes\twidth - %d bits\n",
 	   base, size>>20, width);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	gt6426x_eth_initialize(bis);
+	return 0;
+}

board/freescale/common/Makefile

@@ -36,6 +36,7 @@ COBJS-${CONFIG_FSL_DIU_FB}	+= fsl_diu_fb.o fsl_logo_bmp.o
 COBJS-${CONFIG_FSL_PIXIS}	+= pixis.o
 COBJS-${CONFIG_PQ_MDS_PIB}	+= pq-mds-pib.o
 COBJS-${CONFIG_ID_EEPROM}	+= sys_eeprom.o
+COBJS-${CONFIG_FSL_SGMII_RISER}	+= sgmii_riser.o
 
 COBJS-${CONFIG_MPC8541CDS}	+= cds_pci_ft.o
 COBJS-${CONFIG_MPC8548CDS}	+= cds_pci_ft.o

board/freescale/common/pixis.c

@@ -26,6 +26,7 @@
 #include <command.h>
 #include <watchdog.h>
 #include <asm/cache.h>
+#include <asm/io.h>
 
 #include "pixis.h"
 
@@ -282,6 +283,60 @@ U_BOOT_CMD(
 	   "diswd	- Disable watchdog timer \n",
 	   NULL);
 
+#ifdef CONFIG_FSL_SGMII_RISER
+int pixis_set_sgmii(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int which_tsec = -1;
+	uchar mask;
+	uchar switch_mask;
+
+	if (argc > 2)
+		if (strcmp(argv[1], "all") != 0)
+			which_tsec = simple_strtoul(argv[1], NULL, 0);
+
+	switch (which_tsec) {
+	case 1:
+		mask = PIXIS_VSPEED2_TSEC1SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC1SER;
+		break;
+	case 3:
+		mask = PIXIS_VSPEED2_TSEC3SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC3SER;
+		break;
+	default:
+		mask = PIXIS_VSPEED2_TSEC1SER | PIXIS_VSPEED2_TSEC3SER;
+		switch_mask = PIXIS_VCFGEN1_TSEC1SER | PIXIS_VCFGEN1_TSEC3SER;
+		break;
+	}
+
+	/* Toggle whether the switches or FPGA control the settings */
+	if (!strcmp(argv[argc - 1], "switch"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+	else
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VCFGEN1,
+			switch_mask);
+
+	/* If it's not the switches, enable or disable SGMII, as specified */
+	if (!strcmp(argv[argc - 1], "on"))
+		clrbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+	else if (!strcmp(argv[argc - 1], "off"))
+		setbits_8((unsigned char *)PIXIS_BASE + PIXIS_VSPEED2, mask);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+		pixis_set_sgmii, CFG_MAXARGS, 1, pixis_set_sgmii,
+		"pixis_set_sgmii"
+		" - Enable or disable SGMII mode for a given TSEC \n",
+		"\npixis_set_sgmii [TSEC num] <on|off|switch>\n"
+		"    TSEC num: 1,2,3,4 or 'all'.  'all' is default.\n"
+		"    on - enables SGMII\n"
+		"    off - disables SGMII\n"
+		"    switch - use switch settings\n");
+#endif
+
 /*
  * This function takes the non-integral cpu:mpx pll ratio
  * and converts it to an integer that can be used to assign

board/freescale/common/sgmii_riser.c

@@ -0,0 +1,26 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <tsec.h>
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		if (tsec_info[i].flags & TSEC_SGMII)
+			tsec_info[i].phyaddr += SGMII_RISER_PHY_OFFSET;
+}

board/freescale/common/sgmii_riser.h

@@ -0,0 +1,15 @@
+/*
+ * Freescale SGMII Riser Card
+ *
+ * This driver supports the SGMII Riser card found on the
+ * "DS" style of development board from Freescale.
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ */
+
+void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num);

board/freescale/mpc7448hpc2/mpc7448hpc2.c

@@ -32,6 +32,7 @@
 #include <common.h>
 #include <74xx_7xx.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #undef	DEBUG
 
@@ -92,3 +93,12 @@ ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+#if defined(CONFIG_TSI108_ETH)
+	rc = tsi108_eth_initialize(bis);
+#endif
+	return rc;
+}

board/freescale/mpc8315erdb/mpc8315erdb.c

@@ -29,6 +29,7 @@
 #include <fdt_support.h>
 #include <pci.h>
 #include <mpc83xx.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -165,3 +166,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_tsec1_fixup(blob, bd);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Initialize TSECs first */
+	return pci_eth_init(bis);
+}

board/freescale/mpc8544ds/mpc8544ds.c

@@ -32,8 +32,11 @@
 #include <miiphy.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
+#include "../common/sgmii_riser.h"
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -463,6 +466,42 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_TSEC_ENET
+	struct tsec_info_struct tsec_info[2];
+	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	int num = 0;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	SET_STD_TSEC_INFO(tsec_info[num], 3);
+	if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+		tsec_info[num].flags |= TSEC_SGMII;
+	num++;
+#endif
+
+	if (!num) {
+		printf("No TSECs initialized\n");
+
+		return 0;
+	}
+
+	if (io_sel & 1)
+		fsl_sgmii_riser_init(tsec_info, num);
+
+
+	tsec_eth_init(bis, tsec_info, num);
+#endif
+	return pci_eth_init(bis);
+}
+
 #if defined(CONFIG_OF_BOARD_SETUP)
 
 void

board/freescale/mpc8610hpcd/mpc8610hpcd.c

@@ -32,6 +32,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <spd_sdram.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
@@ -520,12 +521,7 @@ get_board_sys_clk(ulong dummy)
 	return val;
 }
 
-extern int uli526x_initialize(bd_t *);
-
 int board_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_ULI526)
-	uli526x_initialize(bis);
-#endif
-	return 0;
+	return pci_eth_init(bis);
 }

board/freescale/mpc8641hpcn/mpc8641hpcn.c

@@ -29,6 +29,7 @@
 #include <asm/io.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 #include "../common/pixis.h"
 
@@ -379,3 +380,10 @@ get_board_sys_clk(ulong dummy)
 
 	return val;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	/* Initialize TSECs */
+	cpu_eth_init(bis);
+	return pci_eth_init(bis);
+}

board/hidden_dragon/hidden_dragon.c

@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -93,3 +94,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/icecube/icecube.c

@@ -29,6 +29,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <netdev.h>
 
 #if defined(CONFIG_LITE5200B)
 #include "mt46v32m16.h"
@@ -390,3 +391,9 @@ ft_board_setup(void *blob, bd_t *bd)
 	ft_cpu_setup(blob, bd);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/incaip/incaip.c

@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/addrspace.h>
 #include <asm/inca-ip.h>
 #include <asm/io.h>
@@ -116,3 +117,10 @@ int checkboard (void)
 
 	return 0;
 }
+
+#if defined(CONFIG_INCA_IP_SWITCH)
+int board_eth_init(bd_t *bis)
+{
+	return inca_switch_initialize(bis);
+}
+#endif

board/integratorap/integratorap.c

@@ -39,6 +39,8 @@
 #include <pci.h>
 #endif
 
+#include <netdev.h>
+
 DECLARE_GLOBAL_DATA_PTR;
 
 void flash__init (void);
@@ -647,3 +649,8 @@ ulong get_tbclk (void)
 {
 	return CFG_HZ_CLOCK/div_clock;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/ixdp425/ixdp425.c

@@ -31,6 +31,7 @@
 #include <common.h>
 #include <command.h>
 #include <malloc.h>
+#include <netdev.h>
 #include <asm/arch/ixp425.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -118,3 +119,8 @@ void pci_init_board(void)
 	pci_ixp_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/linkstation/linkstation.c

@@ -26,6 +26,7 @@
 #include <mpc824x.h>
 #include <asm/io.h>
 #include <ns16550.h>
+#include <netdev.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -128,3 +129,8 @@ int board_early_init_f (void)
 	out_8((volatile u8*)UART_DCR, 1);
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/matrix_vision/mvbc_p/mvbc_p.c

@@ -35,6 +35,7 @@
 #include <fpga.h>
 #include <environment.h>
 #include <fdt_support.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include "fpga.h"
 #include "mvbc_p.h"
@@ -324,3 +325,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	ft_cpu_setup(blob, bd);
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/mimc/mimc200/mimc200.c

@@ -20,6 +20,7 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -195,8 +196,6 @@ void spi_cs_deactivate(struct spi_slave *slave)
 #endif /* CONFIG_ATMEL_SPI */
 
 #ifdef CONFIG_CMD_NET
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 int board_eth_init(bd_t *bi)
 {
 	macb_eth_initialize(0, (void *)MACB0_BASE, bi->bi_phy_id[0]);

board/miromico/hammerhead/hammerhead.c

@@ -25,6 +25,7 @@
 #include "../cpu/at32ap/at32ap700x/sm.h"
 
 #include <common.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/sdram.h>
@@ -51,8 +52,6 @@ static const struct sdram_config sdram_config = {
 	.refresh_period	= (781 * (SDRAMC_BUS_HZ / 1000)) / 100000,
 };
 
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
 #ifdef CONFIG_CMD_NET
 int board_eth_init(bd_t *bis)
 {

board/mousse/mousse.c

@@ -28,6 +28,7 @@
 
 #include <common.h>
 #include <mpc824x.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 #include "mousse.h"
@@ -84,3 +85,8 @@ int misc_init_f (void)
 	get_tod ();
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/mpc8540eval/mpc8540eval.c

@@ -24,6 +24,7 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
@@ -247,3 +248,14 @@ long int fixed_sdram (void)
 	return (CFG_SDRAM_SIZE * 1024 * 1024);
 }
 #endif	/* !defined(CONFIG_SPD_EEPROM) */
+
+int board_eth_init(bd_t *bis)
+{
+	/*
+	 * This board either has PCI NICs or uses the CPU's TSECs
+	 * pci_eth_init() will return 0 if no NICs found, so in that case
+	 * returning -1 will force cpu_eth_init() to be called.
+	 */
+	int num = pci_eth_init(bis);
+	return (num <= 0 ? -1 : num);
+}

board/musenki/musenki.c

@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -102,3 +103,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/mvblue/mvblue.c

@@ -9,6 +9,7 @@
 #include <mpc824x.h>
 #include <asm/io.h>
 #include <ns16550.h>
+#include <netdev.h>
 
 #ifdef CONFIG_PCI
 #include <pci.h>
@@ -245,4 +246,9 @@ void pci_init_board (void)
 {
 	pci_mpc824x_init (&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}
 #endif

board/o2dnt/o2dnt.c

@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #define SDRAM_MODE      0x00CD0000
 #define SDRAM_CONTROL   0x504F0000
@@ -180,3 +181,9 @@ void pci_init_board(void)
 	pci_mpc5xxx_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/oxc/oxc.c

@@ -25,6 +25,7 @@
 #include <mpc824x.h>
 #include <pci.h>
 #include <i2c.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -215,3 +216,8 @@ int misc_init_r (void)
 #endif
 	return (0);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/pcippc2/pcippc2.c

@@ -28,6 +28,7 @@
 #include <linux/mtd/doc2000.h>
 #include <watchdog.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "hardware.h"
 #include "pcippc2.h"
@@ -243,3 +244,8 @@ U_BOOT_CMD(
 
 #endif
 #endif	/* CONFIG_WATCHDOG */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/pm520/pm520.c

@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #if defined(CONFIG_MPC5200_DDR)
 #include "mt46v16m16-75.h"
@@ -321,3 +322,9 @@ void doc_init (void)
 	doc_probe (CFG_DOC_BASE);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/pm826/pm826.c

@@ -25,6 +25,7 @@
 #include <ioports.h>
 #include <mpc8260.h>
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -328,3 +329,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/pm828/pm828.c

@@ -25,6 +25,7 @@
 #include <ioports.h>
 #include <mpc8260.h>
 #include <pci.h>
+#include <netdev.h>
 
 /*
  * I/O Port configuration table
@@ -361,3 +362,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/pm854/pm854.c

@@ -27,6 +27,7 @@
 
 #include <common.h>
 #include <pci.h>
+#include <netdev.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/immap_85xx.h>
@@ -289,3 +290,9 @@ pci_init_board(void)
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}

board/pm856/pm856.c

@@ -34,6 +34,7 @@
 #include <ioports.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
+#include <netdev.h>
 
 #if defined(CONFIG_DDR_ECC)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -444,3 +445,9 @@ pci_init_board(void)
 	pci_mpc85xx_init(&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}

board/pn62/pn62.c

@@ -23,6 +23,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "pn62.h"
 
@@ -186,3 +187,8 @@ static int get_mac_address (int id, u8 * mac, char *string, int size)
 				mac[0], mac[1], mac[2],
 				mac[3], mac[4], mac[5]);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/ppmc7xx/ppmc7xx.c

@@ -10,6 +10,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 
 
 /* Define some MPC107 (memory controller) registers */
@@ -102,3 +103,8 @@ void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
 	/* Should never get here */
 	while(1);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/purple/purple.c

@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <netdev.h>
 #include <asm/inca-ip.h>
 #include <asm/regdef.h>
 #include <asm/mipsregs.h>
@@ -274,3 +275,11 @@ void copy_code (ulong dest_addr)
 		start += CFG_CACHELINE_SIZE;
 	}
 }
+
+#ifdef CONFIG_PLB2800_ETHER
+int board_eth_init(bd_t *bis)
+{
+	return plb2800_eth_initialize(bis);
+}
+#endif
+

board/r2dplus/r2dplus.c

@@ -76,3 +76,8 @@ void pci_init_board(void)
 {
 	pci_sh7751_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/r7780mp/r7780mp.c

@@ -23,6 +23,7 @@
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/pci.h>
+#include <netdev.h>
 #include "r7780mp.h"
 
 int checkboard(void)
@@ -77,3 +78,8 @@ void pci_init_board(void)
 {
 	pci_sh7780_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sandpoint/sandpoint.c

@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -99,3 +100,8 @@ void pci_init_board(void)
 {
 	pci_mpc824x_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sbc8240/sbc8240.c

@@ -28,6 +28,7 @@
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <pci.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -103,3 +104,8 @@ int misc_init_r (void)
 	return (0);
 }
 #endif /* CONFIG_MISC_INIT_R */
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sc3/sc3.c

@@ -37,6 +37,7 @@
 #include <pci.h>
 #include <i2c.h>
 #include <malloc.h>
+#include <netdev.h>
 
 #undef writel
 #undef writeb
@@ -779,3 +780,8 @@ void pci_init_board(void)
 	hose.config_table = pci_solidcard3_config_table;
 	pci_405gp_init(&hose);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sc520_cdp/sc520_cdp.c

@@ -29,6 +29,7 @@
 #include <asm/ic/sc520.h>
 #include <asm/ic/ali512x.h>
 #include <spi.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -629,3 +630,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 #endif
 	return res;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sc520_spunk/sc520_spunk.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <pci.h>
 #include <ssi.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/pci.h>
 #include <asm/ic/sc520.h>
@@ -676,3 +677,8 @@ ssize_t spi_write(uchar *addr, int alen, uchar *buffer, int len)
 		spi_eeprom_write(1, offset, buffer, len) :
 	mw_eeprom_write(1, offset, buffer, len);
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/sl8245/sl8245.c

@@ -24,6 +24,7 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <pci.h>
+#include <netdev.h>
 
 int checkboard (void)
 {
@@ -67,8 +68,6 @@ void pci_init_board(void)
 	pci_mpc824x_init(&hose);
 }
 
-extern int skge_initialize(bd_t *bis);
-
 int board_eth_init(bd_t *bis)
 {
 	int rc = 0;

board/sorcery/sorcery.c

@@ -26,6 +26,7 @@
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <pci.h>
+#include <netdev.h>
 
 phys_size_t initdram (int board_type)
 {
@@ -58,3 +59,8 @@ void pci_init_board (void)
 	pci_mpc8220_init (&hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/stxssa/stxssa.c

@@ -39,6 +39,7 @@
 #include <asm/io.h>
 #include <spd_sdram.h>
 #include <miiphy.h>
+#include <netdev.h>
 
 long int fixed_sdram (void);
 
@@ -400,3 +401,10 @@ pci_init_board(void)
 	pci_mpc85xx_init(hose);
 #endif /* CONFIG_PCI */
 }
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Initialize TSECs first */
+	return pci_eth_init(bis);
+}
+

board/tb0229/tb0229.c

@@ -46,3 +46,8 @@ int checkboard (void)
 
 	return 0;
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/total5200/total5200.c

@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #include "sdram.h"
 
@@ -308,3 +309,9 @@ int board_get_height (void)
 }
 
 #endif /* CONFIG_VIDEO_SED13806 */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/tqc/tqm5200/tqm5200.c

@@ -32,6 +32,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <netdev.h>
 
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
@@ -749,3 +750,9 @@ void ft_board_setup(void *blob, bd_t *bd)
 	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
 }
 #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis); /* Built in FEC comes first */
+	return pci_eth_init(bis);
+}

board/tqc/tqm8272/tqm8272.c

@@ -26,6 +26,7 @@
 #include <mpc8260.h>
 
 #include <command.h>
+#include <netdev.h>
 #ifdef CONFIG_PCI
 #include <pci.h>
 #include <asm/m8260_pci.h>
@@ -1226,3 +1227,8 @@ void pci_init_board(void)
 	pci_mpc8250_init(&hose);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

board/tqc/tqm85xx/tqm85xx.c

@@ -42,6 +42,7 @@
 #include <flash.h>
 #include <libfdt.h>
 #include <fdt_support.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -743,3 +744,9 @@ int board_early_init_r (void)
 	return (0);
 }
 #endif /* CONFIG_BOARD_EARLY_INIT_R */
+
+int board_eth_init(bd_t *bis)
+{
+	cpu_eth_init(bis);	/* Intialize TSECs first */
+	return pci_eth_init(bis);
+}

board/utx8245/utx8245.c

@@ -32,6 +32,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <pci.h>
+#include <netdev.h>
 
 #define	SAVE_SZ	32
 
@@ -127,3 +128,8 @@ void pci_init_board (void)
 
 	icache_enable();
 }
+
+int board_eth_init(bd_t *bis)
+{
+	return pci_eth_init(bis);
+}

cpu/arm926ejs/at91/Makefile

@@ -25,7 +25,6 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).a
 
-COBJS-y	+= ether.o
 COBJS-y	+= timer.o
 COBJS-$(CONFIG_HAS_DATAFLASH) +=spi.o
 COBJS-y	+= usb.o

cpu/arm926ejs/at91/ether.c

@@ -1,35 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
-
-#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
-void at91sam9_eth_initialize(bd_t *bi)
-{
-	macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
-}
-#endif

cpu/leon2/cpu.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -57,8 +58,6 @@ int do_reset(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 /* ------------------------------------------------------------------------- */
 
-extern int greth_initialize(bd_t *bis);
-
 #ifdef CONFIG_GRETH
 int cpu_eth_init(bd_t *bis)
 {

cpu/leon3/cpu.c

@@ -25,6 +25,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -65,7 +66,6 @@ u64 flash_read64(void *addr)
 }
 
 /* ------------------------------------------------------------------------- */
-extern int greth_initialize(bd_t *bis);
 
 #ifdef CONFIG_GRETH
 int cpu_eth_init(bd_t *bis)

cpu/mcf523x/cpu.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -114,8 +115,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);

cpu/mcf52x2/cpu.c

@@ -32,6 +32,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <asm/immap.h>
+#include <netdev.h>
 
 #ifdef  CONFIG_M5271
 /*
@@ -328,8 +329,6 @@ int do_reset(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);

cpu/mcf532x/cpu.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -136,8 +137,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);

cpu/mcf5445x/cpu.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -102,8 +103,6 @@ int checkcpu(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 	return mcffec_initialize(bis);

cpu/mcf547x_8x/cpu.c

@@ -28,6 +28,7 @@
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <netdev.h>
 
 #include <asm/immap.h>
 
@@ -148,9 +149,6 @@ int watchdog_init(void)
  * 	int board_eth_init(bd_t *bis)
  */
 
-extern int mcdmafec_initialize(bd_t *bis);
-extern int mcffec_initialize(bd_t*);
-
 int cpu_eth_init(bd_t *bis)
 {
 #if defined(CONFIG_FSLDMAFEC)

cpu/mpc512x/cpu.c

@@ -30,6 +30,7 @@
 #include <common.h>
 #include <command.h>
 #include <mpc512x.h>
+#include <netdev.h>
 #include <asm/processor.h>
 
 #if defined(CONFIG_OF_LIBFDT)
@@ -195,3 +196,15 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #endif
 }
 #endif
+
+#ifdef CONFIG_MPC512x_FEC
+/* Default initializations for FEC controllers.  To override,
+ * create a board-specific function called:
+ * 	int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+	return mpc512x_fec_initialize(bis);
+}
+#endif

cpu/mpc5xxx/cpu.c

@@ -29,6 +29,7 @@
 #include <watchdog.h>
 #include <command.h>
 #include <mpc5xxx.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <asm/processor.h>
 
@@ -155,3 +156,15 @@ ulong bootcount_load (void)
 		return (*save_addr & 0x0000ffff);
 }
 #endif /* CONFIG_BOOTCOUNT_LIMIT */
+
+#ifdef CONFIG_MPC5xxx_FEC
+/* Default initializations for FEC controllers.  To override,
+ * create a board-specific function called:
+ * 	int board_eth_init(bd_t *bis)
+ */
+
+int cpu_eth_init(bd_t *bis)
+{
+	return mpc5xxx_fec_initialize(bis);
+}
+#endif

cpu/mpc83xx/cpu.c

@@ -32,6 +32,7 @@
 #include <mpc83xx.h>
 #include <asm/processor.h>
 #include <libfdt.h>
+#include <tsec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -358,22 +359,15 @@ int dma_xfer(void *dest, u32 count, void *src)
 }
 #endif /*CONFIG_DDR_ECC*/
 
-#ifdef CONFIG_TSEC_ENET
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
  */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
-
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
-#endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
+#if defined(CONFIG_TSEC_ENET)
+	tsec_standard_init(bis);
 #endif
+
 	return 0;
 }
-#endif

cpu/mpc85xx/cpu.c

@@ -25,9 +25,11 @@
  * MA 02111-1307 USA
  */
 
+#include <config.h>
 #include <common.h>
 #include <watchdog.h>
 #include <command.h>
+#include <tsec.h>
 #include <asm/cache.h>
 #include <asm/io.h>
 
@@ -294,6 +296,7 @@ int dma_xfer(void *dest, uint count, void *src) {
 	return dma_check();
 }
 #endif
+
 /*
  * Configures a UPM. Currently, the loop fields in MxMR (RLF, WLF and TLF)
  * are hardcoded as "1"."size" is the number or entries, not a sizeof.
@@ -360,32 +363,16 @@ void upmconfig (uint upm, uint * table, uint size)
 	out_be32(mxmr, loopval); /* OP_NORMAL */
 }
 
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIGMPC85XX_FEC)
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
+
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
  */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
-
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
-#endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
-#endif
-#if defined(CONFIG_MPC85XX_FEC)
-	tsec_initialize(bis, 2, CONFIG_MPC85XX_FEC_NAME);
-#else
-#if defined(CONFIG_TSEC3)
-	tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
-#endif
-#if defined(CONFIG_TSEC4)
-	tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
-#endif
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85xx_FEC)
+	tsec_standard_init(bis);
 #endif
+
 	return 0;
 }
-#endif

cpu/mpc86xx/cpu.c

@@ -28,6 +28,7 @@
 #include <asm/cache.h>
 #include <asm/mmu.h>
 #include <mpc86xx.h>
+#include <tsec.h>
 #include <asm/fsl_law.h>
 
 
@@ -305,28 +306,15 @@ void mpc86xx_reginfo(void)
 
 }
 
-#ifdef CONFIG_TSEC_ENET
-/* Default initializations for TSEC controllers.  To override,
- * create a board-specific function called:
- * 	int board_eth_init(bd_t *bis)
+/*
+ * Initializes on-chip ethernet controllers.
+ * to override, implement board_eth_init()
  */
-
-extern int tsec_initialize(bd_t * bis, int index, char *devname);
-
 int cpu_eth_init(bd_t *bis)
 {
-#if defined(CONFIG_TSEC1)
-	tsec_initialize(bis, 0, CONFIG_TSEC1_NAME);
-#endif
-#if defined(CONFIG_TSEC2)
-	tsec_initialize(bis, 1, CONFIG_TSEC2_NAME);
-#endif
-#if defined(CONFIG_TSEC3)
-	tsec_initialize(bis, 2, CONFIG_TSEC3_NAME);
-#endif
-#if defined(CONFIG_TSEC4)
-	tsec_initialize(bis, 3, CONFIG_TSEC4_NAME);
+#if defined(CONFIG_TSEC_ENET)
+	tsec_standard_init(bis);
 #endif
+
 	return 0;
 }
-#endif /* CONFIG_TSEC_ENET */

drivers/net/bfin_mac.c

@@ -9,6 +9,7 @@
 #include <common.h>
 #include <config.h>
 #include <net.h>
+#include <netdev.h>
 #include <command.h>
 #include <malloc.h>
 

drivers/net/dc2114x.c

@@ -21,6 +21,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <pci.h>
 
 #undef DEBUG_SROM

drivers/net/e1000.c

@@ -3059,5 +3059,5 @@ e1000_initialize(bd_t * bis)
 
 		card_number++;
 	}
-	return 1;
+	return card_number;
 }

drivers/net/e1000.h

@@ -36,6 +36,7 @@
 #include <common.h>
 #include <malloc.h>
 #include <net.h>
+#include <netdev.h>
 #include <asm/io.h>
 #include <pci.h>