Prepare v2023.01-rc4

-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEEGjx/cOCPqxcHgJu/FHw5/5Y0tywFAmOgaw0ACgkQFHw5/5Y0
 tyxIeQv8DfAAB8hN+wWeDhQAJBXBLvV+RrocGJ2lpuWN0DUgT955l0zSjP4eD5I/
 sSsT8iJ15obkbWHq61V9W81Velw5qR+gHW9IAzFKiQBfvdcdfgWFeme9fWp/gqxn
 vvPc2sULA9utkc+kQ+qJy2hmTM7I0ZbKzUwTXSv+Tp9on3vlc0quKSHiZ1EvHNww
 8tW13d1r+Be+CC+GVPrhJojfKBcYVJhW21rJMgb4JdfGNWKmpUpF6fUzHe0wiy2P
 HSnScr44E099t9RDZabw0V1fEgQqxIAmL1qQamXf9ddLZQM9Sq63lygTtGsqg61+
 qeHCZVjPg9cXayGfRVesH8sko3vW+IPuo0Q6Ox0vAyRSyzTpOcTuzn3RcMrq+mfu
 ZRF32aFJKVvAI3xesOj1aCBBYjl4POiHA8i3yeP9KcjqW3So0aphDtxp1idgwOZl
 kIxuC4ItWyF7xoyng/7RWwr2VjcKSyw58stRjfV+WNcByV4+ud1A59vsgZOqO49m
 0bLx5dGu
 =EX/F
 -----END PGP SIGNATURE-----

Merge tag 'v2023.01-rc4' into next

Prepare v2023.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

Kconfig

@@ -586,6 +586,7 @@ config SYS_SRAM_SIZE
 config SYS_MONITOR_LEN
 	int "Maximum size in bytes reserved for U-Boot in memory"
 	default 1048576 if X86
+	default 786432 if ARCH_SUNXI
 	default 0
 	help
 	  Size of memory reserved for monitor code, used to determine

MAINTAINERS

@@ -568,10 +568,9 @@ F:	drivers/spi/stm32_spi.c
 F:	drivers/video/stm32/stm32_ltdc.c
 F:	drivers/watchdog/stm32mp_wdt.c
 F:	include/dt-bindings/clock/stm32fx-clock.h
-F:	include/dt-bindings/clock/stm32mp1-clks.h
+F:	include/dt-bindings/clock/stm32mp*
-F:	include/dt-bindings/clock/stm32mp1-clksrc.h
 F:	include/dt-bindings/pinctrl/stm32-pinfunc.h
-F:	include/dt-bindings/reset/stm32mp1-resets.h
+F:	include/dt-bindings/reset/stm32mp*
 F:	include/stm32_rcc.h
 F:	tools/stm32image.c
 N:	stm

Makefile

@@ -3,7 +3,7 @@
 VERSION = 2023
 PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME =
 
 # *DOCUMENTATION*
@@ -1336,7 +1336,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
                 --toolpath $(objtree)/tools \
 		$(if $(BINMAN_VERBOSE),-v$(BINMAN_VERBOSE)) \
 		build -u -d u-boot.dtb -O . -m \
-		$(if $(BINMAN_ALLOW_MISSING),--allow-missing --fake-ext-blobs) \
+		$(if $(BINMAN_ALLOW_MISSING),--allow-missing --ignore-missing) \
 		-I . -I $(srctree) -I $(srctree)/board/$(BOARDDIR) \
 		-I arch/$(ARCH)/dts -a of-list=$(CONFIG_OF_LIST) \
 		$(foreach f,$(BINMAN_INDIRS),-I $(f)) \

arch/Kconfig

@@ -111,7 +111,7 @@ config RISCV
 	select SUPPORT_OF_CONTROL
 	select OF_CONTROL
 	select DM
-	select SPL_SEPARATE_BSS if SPL
+	imply SPL_SEPARATE_BSS if SPL
 	imply DM_SERIAL
 	imply DM_EVENT
 	imply DM_MMC

arch/arm/Kconfig

@@ -413,52 +413,6 @@ config ARM_SMCCC
 	  This should be enabled if U-Boot needs to communicate with system
 	  firmware (for example, PSCI) according to SMCCC.
 
-config SEMIHOSTING
-	bool "Support ARM semihosting"
-	help
-	  Semihosting is a method for a target to communicate with a host
-	  debugger. It uses special instructions which the debugger will trap
-	  on and interpret. This allows U-Boot to read/write files, print to
-	  the console, and execute arbitrary commands on the host system.
-
-	  Enabling this option will add support for reading and writing files
-	  on the host system. If you don't have a debugger attached then trying
-	  to do this will likely cause U-Boot to hang. Say 'n' if you are unsure.
-
-config SEMIHOSTING_FALLBACK
-	bool "Recover gracefully when semihosting fails"
-	depends on SEMIHOSTING && ARM64
-	default y
-	help
-	  Normally, if U-Boot makes a semihosting call and no debugger is
-	  attached, then it will panic due to a synchronous abort
-	  exception. This config adds an exception handler which will allow
-	  U-Boot to recover. Say 'y' if unsure.
-
-config SPL_SEMIHOSTING
-	bool "Support ARM semihosting in SPL"
-	depends on SPL
-	help
-	  Semihosting is a method for a target to communicate with a host
-	  debugger. It uses special instructions which the debugger will trap
-	  on and interpret. This allows U-Boot to read/write files, print to
-	  the console, and execute arbitrary commands on the host system.
-
-	  Enabling this option will add support for reading and writing files
-	  on the host system. If you don't have a debugger attached then trying
-	  to do this will likely cause U-Boot to hang. Say 'n' if you are unsure.
-
-config SPL_SEMIHOSTING_FALLBACK
-	bool "Recover gracefully when semihosting fails in SPL"
-	depends on SPL_SEMIHOSTING && ARM64
-	select ARMV8_SPL_EXCEPTION_VECTORS
-	default y
-	help
-	  Normally, if U-Boot makes a semihosting call and no debugger is
-	  attached, then it will panic due to a synchronous abort
-	  exception. This config adds an exception handler which will allow
-	  U-Boot to recover. Say 'y' if unsure.
-
 config SYS_THUMB_BUILD
 	bool "Build U-Boot using the Thumb instruction set"
 	depends on !ARM64

arch/arm/dts/rk3128-evb-u-boot.dtsi

@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rk3128-u-boot.dtsi"
+
+&emmc {
+	u-boot,dm-pre-reloc;
+};

arch/arm/dts/rk3128-evb.dts

@@ -15,6 +15,11 @@
 		stdout-path = &uart2;
 	};
 
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
 	vcc5v0_otg: vcc5v0-otg-drv {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc5v0_otg";
@@ -37,6 +42,11 @@
 	};
 };
 
+&emmc {
+	fifo-mode;
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -74,21 +84,16 @@
 	status = "okay";
 };
 
-&emmc {
-	fifo-mode;
-	status = "okay";
-};
-
 &pinctrl {
 	usb_otg {
 		otg_vbus_drv: host-vbus-drv {
-			rockchip,pins = <0 26 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb_host {
 		host_vbus_drv: host-vbus-drv {
-			rockchip,pins = <2 23 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };

arch/arm/dts/rk3128-u-boot.dtsi

@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include "rockchip-u-boot.dtsi"
+
+/ {
+	dmc: dmc@20004000 {
+		compatible = "rockchip,rk3128-dmc", "syscon";
+		reg = <0x0 0x20004000 0x0 0x1000>;
+		u-boot,dm-pre-reloc;
+	};
+};
+
+&cru {
+	u-boot,dm-pre-reloc;
+};
+
+&grf {
+	u-boot,dm-pre-reloc;
+};

arch/arm/dts/rk3128.dtsi

@@ -8,7 +8,6 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3128-cru.h>
-#include "skeleton.dtsi"
 
 / {
 	compatible = "rockchip,rk3128";
@@ -34,11 +33,6 @@
 		mmc1 = &sdmmc;
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
 	arm-pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -52,10 +46,10 @@
 		#size-cells = <0>;
 		enable-method = "rockchip,rk3128-smp";
 
-		cpu0:cpu@0x000 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			reg = <0x000>;
+			reg = <0x0>;
 			operating-points = <
 				/* KHz    uV */
 				 816000 1000000
@@ -65,22 +59,22 @@
 			clocks = <&cru ARMCLK>;
 		};
 
-		cpu1:cpu@0x001 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			reg = <0x001>;
+			reg = <0x1>;
 		};
 
-		cpu2:cpu@0x002 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			reg = <0x002>;
+			reg = <0x2>;
 		};
 
-		cpu3:cpu@0x003 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
-			reg = <0x003>;
+			reg = <0x3>;
 		};
 	};
 
@@ -165,14 +159,14 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		pdma: pdma@20078000 {
+		pdma: dma-controller@20078000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20078000 0x4000>;
 			arm,pl330-broken-no-flushp;//2
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
-			clocks = <&cru ACLK_DMAC2>;
+			clocks = <&cru ACLK_DMAC>;
 			clock-names = "apb_pclk";
 		};
 	};
@@ -186,7 +180,6 @@
 
 	xin12m: xin12m {
 		compatible = "fixed-clock";
-		clocks = <&xin24m>;
 		clock-frequency = <12000000>;
 		clock-output-names = "xin12m";
 		#clock-cells = <0>;
@@ -207,10 +200,10 @@
 		rockchip,broadcast = <1>;
 	};
 
-	watchdog: wdt@2004c000 {
+	watchdog: watchdog@2004c000 {
-		compatible = "rockchip,watch dog";
+		compatible = "rockchip,rk3128-wdt", "snps,dw-wdt";
 		reg = <0x2004c000 0x100>;
-		clock-names = "pclk_wdt";
+		clocks = <&cru PCLK_WDT>;
 		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 		rockchip,irq = <1>;
 		rockchip,timeout = <60>;
@@ -224,29 +217,21 @@
 		#reset-cells = <1>;
 	};
 
-	nandc: nandc@10500000 {
+	nandc: nand-controller@10500000 {
-		compatible = "rockchip,rk-nandc";
+		compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc";
 		reg = <0x10500000 0x4000>;
 		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&nandc_ale &nandc_cle &nandc_wrn &nandc_rdn &nandc_rdy &nandc_cs0 &nandc_data>;
-		nandc_id = <0>;
+		clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
-		clocks = <&cru SCLK_NANDC>,
+		clock-names = "ahb", "nfc";
-			 <&cru HCLK_NANDC>,
-			 <&cru SRST_NANDC>;
-		clock-names = "clk_nandc", "g_clk_nandc", "hclk_nandc";
-	};
-
-	dmc: dmc@20004000 {
-		u-boot,dm-pre-reloc;
-		compatible = "rockchip,rk3128-dmc", "syscon";
-		reg = <0x0 0x20004000 0x0 0x1000>;
 	};
 
 	cru: clock-controller@20000000 {
-		u-boot,dm-pre-reloc;
 		compatible = "rockchip,rk3128-cru";
 		reg = <0x20000000 0x1000>;
+		clocks = <&xin24m>;
+		clock-names = "xin24m";
 		rockchip,grf = <&grf>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
@@ -254,7 +239,7 @@
 		assigned-clock-rates = <594000000>;
 	};
 
-	uart0: serial0@20060000 {
+	uart0: serial@20060000 {
 		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
 		reg = <0x20060000 0x100>;
 		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -269,7 +254,7 @@
 		#dma-cells = <2>;
 	};
 
-	uart1: serial1@20064000 {
+	uart1: serial@20064000 {
 		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
 		reg = <0x20064000 0x100>;
 		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -284,7 +269,7 @@
 		#dma-cells = <2>;
 	};
 
-	uart2: serial2@20068000 {
+	uart2: serial@20068000 {
 		compatible = "rockchip,rk3128-uart", "snps,dw-apb-uart";
 		reg = <0x20068000 0x100>;
 		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -311,44 +296,40 @@
 		status = "disabled";
 	};
 
-	pwm0: pwm0@20050000 {
+	pwm0: pwm@20050000 {
 		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20050000 0x10>;
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm0_pin>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 	};
 
-	pwm1: pwm1@20050010 {
+	pwm1: pwm@20050010 {
 		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20050010 0x10>;
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm1_pin>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 	};
 
-	pwm2: pwm2@20050020 {
+	pwm2: pwm@20050020 {
 		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20050020 0x10>;
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm2_pin>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 	};
 
-	pwm3: pwm3@20050030 {
+	pwm3: pwm@20050030 {
 		compatible = "rockchip,rk3128-pwm", "rockchip,rk3288-pwm";
 		reg = <0x20050030 0x10>;
 		#pwm-cells = <3>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwm3_pin>;
 		clocks = <&cru PCLK_PWM>;
-		clock-names = "pwm";
 	};
 
 	sram: sram@10080400 {
@@ -377,7 +358,7 @@
 		interrupts = <GIC_PPI 9 0xf04>;
 	};
 
-	u2phy: usb2-phy {
+	u2phy: usb2phy {
 		compatible = "rockchip,rk3128-usb2phy";
 		reg = <0x017c 0x0c>;
 		rockchip,grf = <&grf>;
@@ -385,7 +366,6 @@
 		clock-names = "phyclk";
 		#clock-cells = <0>;
 		clock-output-names = "usb480m_phy";
-		#phy-cells = <1>;
 		status = "disabled";
 
 		u2phy_otg: otg-port {
@@ -407,15 +387,14 @@
 	};
 
 	usb_otg: usb@10180000 {
-		compatible = "rockchip,rk3128-usb", "rockchip,rk3288-usb",
+		compatible = "rockchip,rk3128-usb", "rockchip,rk3066-usb", "snps,dwc2";
-			     "snps,dwc2";
 		reg = <0x10180000 0x40000>;
 		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_OTG>;
+		clock-names = "otg";
 		dr_mode = "otg";
-		g-use-dma;
+		phys = <&u2phy_otg>;
-		hnp-srp-disable;
+		phy-names = "usb2-phy";
-		phys = <&u2phy 0>;
-		phy-names = "usb";
 		status = "disabled";
 	};
 
@@ -423,7 +402,7 @@
 		compatible = "generic-ehci";
 		reg = <0x101c0000 0x20000>;
 		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		phys = <&u2phy 1>;
+		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
 	};
@@ -432,19 +411,19 @@
 		compatible = "generic-ohci";
 		reg = <0x101e0000 0x20000>;
 		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		phys = <&u2phy 1>;
+		phys = <&u2phy_host>;
 		phy-names = "usb";
 		status = "disabled";
 	};
 
-	sdmmc: dwmmc@10214000 {
+	sdmmc: mmc@10214000 {
-		compatible = "rockchip,rk312x-dw-mshc", "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
 		max-frequency = <150000000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
@@ -452,15 +431,14 @@
 		status = "disabled";
 	};
 
-	emmc: dwmmc@1021c000 {
+	emmc: mmc@1021c000 {
-		u-boot,dm-pre-reloc;
 		compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x1021c000 0x4000>;
 		max-frequency = <150000000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
 		num-slots = <1>;
@@ -472,7 +450,7 @@
 		status = "disabled";
 	};
 
-	i2c0: i2c0@20072000 {
+	i2c0: i2c@20072000 {
 		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
 		reg = <20072000 0x1000>;
 		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
@@ -484,7 +462,7 @@
 		pinctrl-0 = <&i2c0_xfer>;
 	};
 
-	i2c1: i2c1@20056000 {
+	i2c1: i2c@20056000 {
 		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
 		reg = <0x20056000 0x1000>;
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -496,7 +474,7 @@
 		pinctrl-0 = <&i2c1_xfer>;
 	};
 
-	i2c2: i2c2@2005a000 {
+	i2c2: i2c@2005a000 {
 		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
 		reg = <0x2005a000 0x1000>;
 		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -508,7 +486,7 @@
 		pinctrl-0 = <&i2c2_xfer>;
 	};
 
-	i2c3: i2c3@2005e000 {
+	i2c3: i2c@2005e000 {
 		compatible = "rockchip,rk3128-i2c", "rockchip,rk3288-i2c";
 		reg = <0x2005e000 0x1000>;
 		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
@@ -521,7 +499,7 @@
 	};
 
 	spi0: spi@20074000 {
-		compatible = "rockchip,rk3128-spi", "rockchip,rk3288-spi";
+		compatible = "rockchip,rk3128-spi", "rockchip,rk3066-spi";
 		reg = <0x20074000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
@@ -530,15 +508,14 @@
 		pinctrl-0 = <&spi0_txd_mux0 &spi0_rxd_mux0 &spi0_clk_mux0 &spi0_cs0_mux0 &spi0_cs1_mux0>;
 		rockchip,spi-src-clk = <0>;
 		num-cs = <2>;
-		clocks =<&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
-		clock-names = "spi","pclk_spi0";
+		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		#dma-cells = <2>;
 		dma-names = "tx", "rx";
 	};
 
 	grf: syscon@20008000 {
-		u-boot,dm-pre-reloc;
 		compatible = "rockchip,rk3128-grf", "syscon";
 		reg = <0x20008000 0x1000>;
 	};
@@ -555,7 +532,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		gpio0: gpio0@2007c000 {
+		gpio0: gpio@2007c000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x2007c000 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -566,7 +543,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio1: gpio1@20080000 {
+		gpio1: gpio@20080000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20080000 0x100>;
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -577,7 +554,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio2: gpio2@20084000 {
+		gpio2: gpio@20084000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20084000 0x100>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -588,7 +565,7 @@
 			#interrupt-cells = <2>;
 		};
 
-		gpio3: gpio2@20088000 {
+		gpio3: gpio@20088000 {
 			compatible = "rockchip,gpio-bank";
 			reg = <0x20088000 0x100>;
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,85 +595,85 @@
 			 */
 
 			emmc_clk: emmc-clk {
-				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA7 2 &pcfg_pull_none>;
 			};
 
 			emmc_cmd: emmc-cmd {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 
 			emmc_pwren: emmc-pwren {
-				rockchip,pins = <2 5 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA5 2 &pcfg_pull_none>;
 			};
 
 			emmc_bus8: emmc-bus8 {
-				rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+				rockchip,pins = <1 RK_PD0 2 &pcfg_pull_none>,
-						<1 25 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD1 2 &pcfg_pull_none>,
-						<1 26 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD2 2 &pcfg_pull_none>,
-						<1 27 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD3 2 &pcfg_pull_none>,
-						<1 28 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD4 2 &pcfg_pull_none>,
-						<1 29 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD5 2 &pcfg_pull_none>,
-						<1 30 RK_FUNC_2 &pcfg_pull_none>,
+						<1 RK_PD6 2 &pcfg_pull_none>,
-						<1 31 RK_FUNC_2 &pcfg_pull_none>;
+						<1 RK_PD7 2 &pcfg_pull_none>;
 			};
 		};
 
 		nandc{
 			nandc_ale:nandc-ale {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_cle:nandc-cle {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_wrn:nandc-wrn {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_rdn:nandc-rdn {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_rdy:nandc-rdy {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_cs0:nandc-cs0 {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			nandc_data: nandc-data {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 		};
 
 		uart0 {
 			uart0_xfer: uart0-xfer {
-				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_none>,
+				rockchip,pins = <0 RK_PC0 1 &pcfg_pull_none>,
-						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+						<0 RK_PC1 1 &pcfg_pull_none>;
 			};
 
 			uart0_cts: uart0-cts {
-				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC2 1 &pcfg_pull_none>;
 			};
 
 			uart0_rts: uart0-rts {
-				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>;
 			};
 		};
 
 		uart1 {
 			uart1_xfer: uart1-xfer {
-				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+				rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>,
-						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+						<2 RK_PC7 1 &pcfg_pull_none>;
 			};
 		};
 
 		uart2 {
 			uart2_xfer: uart2-xfer {
-				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+				rockchip,pins = <1 RK_PC2 2 &pcfg_pull_none>,
-				<1 19 RK_FUNC_2 &pcfg_pull_none>;
+						<1 RK_PC3 2 &pcfg_pull_none>;
 			};
 		};
 
@@ -727,75 +704,75 @@
 
 		pwm0 {
 			pwm0_pin: pwm0-pin {
-				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
 			};
 		};
 
 		pwm1 {
 			pwm1_pin: pwm1-pin {
-				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
 			};
 		};
 
 		pwm2 {
 			pwm2_pin: pwm2-pin {
-				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>;
 			};
 		};
 
 		pwm3 {
 			pwm3_pin: pwm3-pin {
-				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+				rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>;
 			};
 		};
 
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
-				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+				rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>,
-						<0 1 RK_FUNC_1 &pcfg_pull_none>;
+						<0 RK_PA1 1 &pcfg_pull_none>;
 			};
 		};
 
 		i2c1 {
 			i2c1_xfer: i2c1-xfer {
-				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+				rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>,
-						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+						<0 RK_PA3 1 &pcfg_pull_none>;
 			};
 		};
 
 		i2c2 {
 			i2c2_xfer: i2c2-xfer {
-				rockchip,pins = <2 20 3 &pcfg_pull_none>,
+				rockchip,pins = <2 RK_PC4 3 &pcfg_pull_none>,
-						<2 21 3 &pcfg_pull_none>;
+						<2 RK_PC5 3 &pcfg_pull_none>;
 			};
 		};
 
 		i2c3 {
 			i2c3_xfer: i2c3-xfer {
-				rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+				rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>,
-						<0 7 RK_FUNC_1 &pcfg_pull_none>;
+						<0 RK_PA7 1 &pcfg_pull_none>;
 			};
 		};
 
 		spi0 {
 			spi0_txd_mux0:spi0-txd-mux0 {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 
 			spi0_rxd_mux0:spi0-rxd-mux0 {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 
 			spi0_clk_mux0:spi0-clk-mux0 {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 
 			spi0_cs0_mux0:spi0-cs0-mux0 {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 
 			spi0_cs1_mux0:spi0-cs1-mux0 {
-				rockchip,pins = <2 4 RK_FUNC_2 &pcfg_pull_none>;
+				rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>;
 			};
 		};
 

arch/arm/dts/rk3399-pinebook-pro-u-boot.dtsi

@@ -20,14 +20,6 @@
 	rockchip,panel = <&edp_panel>;
 };
 
-&i2c0 {
-	u-boot,dm-pre-reloc;
-};
-
-&rk808 {
-	u-boot,dm-pre-reloc;
-};
-
 &sdhci {
 	max-frequency = <25000000>;
 	u-boot,dm-pre-reloc;

arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi

@@ -15,7 +15,7 @@
 / {
 	config {
 		u-boot,spl-payload-offset = <0x80000>; /* @ 512KB */
-		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
+		u-boot,mmc-env-offset = <0x5000>;      /* @  20KB */
 		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
 		u-boot,boot-led = "module_led";
 		sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;

arch/arm/dts/rockchip-u-boot.dtsi

@@ -11,7 +11,7 @@
 	};
 };
 
-#ifdef CONFIG_SPL
+#ifdef CONFIG_TPL
 &binman {
 	simple-bin {
 		filename = "u-boot-rockchip.bin";

arch/arm/dts/sama7g5-pinfunc.h

@@ -673,7 +673,7 @@
 #define PIN_PD8__GPIO			PINMUX_PIN(PIN_PD8, 0, 0)
 #define PIN_PD8__SDMMC2_DAT3		PINMUX_PIN(PIN_PD8, 1, 1)
 #define PIN_PD8__I2SMCC0_DIN0		PINMUX_PIN(PIN_PD8, 3, 1)
-#define PIN_PD8__A11_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
+#define PIN_PD8__A22_NANDCLE		PINMUX_PIN(PIN_PD8, 4, 2)
 #define PIN_PD8__TIOA2			PINMUX_PIN(PIN_PD8, 5, 2)
 #define PIN_PD8__FLEXCOM11_IO0		PINMUX_PIN(PIN_PD8, 6, 5)
 #define PIN_PD9				105

arch/arm/dts/stm32h743.dtsi

@@ -339,7 +339,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x52007000 0x1000>;
 			interrupts = <49>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB3_RESET(SDMMC1)>;
@@ -353,7 +352,6 @@
 			arm,primecell-periphid = <0x10153180>;
 			reg = <0x48022400 0x400>;
 			interrupts = <124>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_CK>;
 			clock-names = "apb_pclk";
 			resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>;

arch/arm/dts/stm32mp13-u-boot.dtsi

@@ -92,6 +92,10 @@
 	u-boot,dm-pre-reloc;
 };
 
+&rcc {
+	u-boot,dm-pre-reloc;
+};
+
 &scmi {
 	u-boot,dm-pre-reloc;
 };

arch/arm/dts/stm32mp131.dtsi

@@ -4,6 +4,8 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/stm32mp13-clks.h>
+#include <dt-bindings/reset/stm32mp13-resets.h>
 
 / {
 	#address-cells = <1>;
@@ -52,62 +54,6 @@
 		};
 	};
 
-	clocks {
-		clk_axi: clk-axi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <266500000>;
-		};
-
-		clk_hse: clk-hse {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-
-		clk_hsi: clk-hsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <64000000>;
-		};
-
-		clk_lsi: clk-lsi {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32000>;
-		};
-
-		clk_pclk3: clk-pclk3 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <104438965>;
-		};
-
-		clk_pclk4: clk-pclk4 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <133250000>;
-		};
-
-		clk_pll4_p: clk-pll4_p {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-		};
-
-		clk_pll4_r: clk-pll4_r {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <99000000>;
-		};
-
-		clk_rtc_k: clk-rtc-k {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-		};
-	};
-
 	intc: interrupt-controller@a0021000 {
 		compatible = "arm,cortex-a7-gic";
 		#interrupt-cells = <3>;
@@ -155,7 +101,8 @@
 			compatible = "st,stm32h7-uart";
 			reg = <0x40010000 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_hsi>;
+			clocks = <&rcc UART4_K>;
+			resets = <&rcc UART4_R>;
 			status = "disabled";
 		};
 
@@ -170,7 +117,8 @@
 				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMA1>;
+			resets = <&rcc DMA1_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -187,7 +135,8 @@
 				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMA2>;
+			resets = <&rcc DMA2_R>;
 			#dma-cells = <4>;
 			st,mem2mem;
 			dma-requests = <8>;
@@ -196,13 +145,29 @@
 		dmamux1: dma-router@48002000 {
 			compatible = "st,stm32h7-dmamux";
 			reg = <0x48002000 0x40>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc DMAMUX1>;
+			resets = <&rcc DMAMUX1_R>;
 			#dma-cells = <3>;
 			dma-masters = <&dma1 &dma2>;
 			dma-requests = <128>;
 			dma-channels = <16>;
 		};
 
+		rcc: rcc@50000000 {
+			compatible = "st,stm32mp13-rcc", "syscon";
+			reg = <0x50000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+
+			clock-names = "hse", "hsi", "csi", "lse", "lsi";
+			clocks = <&scmi_clk CK_SCMI_HSE>,
+				 <&scmi_clk CK_SCMI_HSI>,
+				 <&scmi_clk CK_SCMI_CSI>,
+				 <&scmi_clk CK_SCMI_LSE>,
+				 <&scmi_clk CK_SCMI_LSI>;
+		};
+
 		exti: interrupt-controller@5000d000 {
 			compatible = "st,stm32mp13-exti", "syscon";
 			interrupt-controller;
@@ -213,14 +178,14 @@
 		syscfg: syscon@50020000 {
 			compatible = "st,stm32mp157-syscfg", "syscon";
 			reg = <0x50020000 0x400>;
-			clocks = <&clk_pclk3>;
+			clocks = <&rcc SYSCFG>;
 		};
 
 		mdma: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>;
+			clocks = <&rcc MDMA>;
 			#dma-cells = <5>;
 			dma-channels = <32>;
 			dma-requests = <48>;
@@ -231,9 +196,9 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC1_K>;
-			clocks = <&clk_pll4_p>;
 			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC1_R>;
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <130000000>;
@@ -245,9 +210,10 @@
 			arm,primecell-periphid = <0x20253180>;
 			reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
+			clocks = <&rcc SDMMC2_K>;
-			clocks = <&clk_pll4_p>;
 			clock-names = "apb_pclk";
+			resets = <&rcc SDMMC2_R>;
+
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			max-frequency = <130000000>;
@@ -257,7 +223,7 @@
 		iwdg2: watchdog@5a002000 {
 			compatible = "st,stm32mp1-iwdg";
 			reg = <0x5a002000 0x400>;
-			clocks = <&clk_pclk4>, <&clk_lsi>;
+			clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
 			clock-names = "pclk", "lsi";
 			status = "disabled";
 		};
@@ -266,7 +232,8 @@
 			compatible = "st,stm32mp1-rtc";
 			reg = <0x5c004000 0x400>;
 			interrupts-extended = <&exti 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_pclk4>, <&clk_rtc_k>;
+			clocks = <&scmi_clk CK_SCMI_RTCAPB>,
+				 <&scmi_clk CK_SCMI_RTC>;
 			clock-names = "pclk", "rtc_ck";
 			status = "disabled";
 		};
@@ -307,7 +274,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x0 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOA>;
 				st,bank-name = "GPIOA";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 0 16>;
@@ -319,7 +286,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x1000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOB>;
 				st,bank-name = "GPIOB";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 16 16>;
@@ -331,7 +298,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x2000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOC>;
 				st,bank-name = "GPIOC";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 32 16>;
@@ -343,7 +310,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x3000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOD>;
 				st,bank-name = "GPIOD";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 48 16>;
@@ -355,7 +322,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x4000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOE>;
 				st,bank-name = "GPIOE";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 64 16>;
@@ -367,7 +334,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOF>;
 				st,bank-name = "GPIOF";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 80 16>;
@@ -379,7 +346,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x6000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOG>;
 				st,bank-name = "GPIOG";
 				ngpios = <16>;
 				gpio-ranges = <&pinctrl 0 96 16>;
@@ -391,7 +358,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x7000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOH>;
 				st,bank-name = "GPIOH";
 				ngpios = <15>;
 				gpio-ranges = <&pinctrl 0 112 15>;
@@ -403,7 +370,7 @@
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				reg = <0x8000 0x400>;
-				clocks = <&clk_pclk4>;
+				clocks = <&rcc GPIOI>;
 				st,bank-name = "GPIOI";
 				ngpios = <8>;
 				gpio-ranges = <&pinctrl 0 128 8>;

arch/arm/dts/stm32mp133.dtsi

@@ -15,7 +15,7 @@
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 			status = "disabled";
@@ -28,7 +28,7 @@
 			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "int0", "int1";
-			clocks = <&clk_hse>, <&clk_pll4_r>;
+			clocks = <&scmi_clk CK_SCMI_HSE>, <&rcc FDCAN_K>;
 			clock-names = "hclk", "cclk";
 			bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 			status = "disabled";

arch/arm/dts/stm32mp135f-dk.dts

@@ -82,7 +82,7 @@
 	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>;
 	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	broken-cd;
+	cd-gpios = <&gpioh 4 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
 	disable-wp;
 	st,neg-edge;
 	bus-width = <4>;

arch/arm/dts/stm32mp13xc.dtsi

@@ -10,7 +10,8 @@
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54002000 0x400>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_axi>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
 			status = "disabled";
 		};
 	};

arch/arm/dts/stm32mp13xf.dtsi

@@ -10,7 +10,8 @@
 			compatible = "st,stm32mp1-cryp";
 			reg = <0x54002000 0x400>;
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_axi>;
+			clocks = <&rcc CRYP1>;
+			resets = <&rcc CRYP1_R>;
 			status = "disabled";
 		};
 	};

arch/arm/dts/stm32mp151.dtsi

@@ -1102,7 +1102,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x48004000 0x400>;
 			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC3_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC3_R>;
@@ -1435,7 +1434,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58005000 0x1000>;
 			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC1_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC1_R>;
@@ -1450,7 +1448,6 @@
 			arm,primecell-periphid = <0x00253180>;
 			reg = <0x58007000 0x1000>;
 			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "cmd_irq";
 			clocks = <&rcc SDMMC2_K>;
 			clock-names = "apb_pclk";
 			resets = <&rcc SDMMC2_R>;

arch/arm/include/asm/arch-rockchip/misc.h

@@ -11,3 +11,4 @@ int rockchip_cpuid_from_efuse(const u32 cpuid_offset,
 			      u8 *cpuid);
 int rockchip_cpuid_set(const u8 *cpuid, const u32 cpuid_length);
 int rockchip_setup_macaddr(void);
+void rockchip_capsule_update_board_setup(void);

arch/arm/lib/semihosting.c

@@ -5,20 +5,6 @@
  */
 
 #include <common.h>
-#include <log.h>
-#include <semihosting.h>
-
-#define SYSOPEN		0x01
-#define SYSCLOSE	0x02
-#define SYSWRITEC	0x03
-#define SYSWRITE0	0x04
-#define SYSWRITE	0x05
-#define SYSREAD		0x06
-#define SYSREADC	0x07
-#define SYSISERROR	0x08
-#define SYSSEEK		0x0A
-#define SYSFLEN		0x0C
-#define SYSERRNO	0x13
 
 /*
  * Macro to force the compiler to *populate* memory (for an array or struct)
@@ -39,7 +25,7 @@
 /*
  * Call the handler
  */
-static long smh_trap(unsigned int sysnum, void *addr)
+long smh_trap(unsigned int sysnum, void *addr)
 {
 	register long result asm("r0");
 	register void *_addr asm("r1") = addr;
@@ -59,168 +45,3 @@ static long smh_trap(unsigned int sysnum, void *addr)
 
 	return result;
 }
-
-#if CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK)
-static bool _semihosting_enabled = true;
-static bool try_semihosting = true;
-
-bool semihosting_enabled(void)
-{
-	if (try_semihosting) {
-		smh_trap(SYSERRNO, NULL);
-		try_semihosting = false;
-	}
-
-	return _semihosting_enabled;
-}
-
-void disable_semihosting(void)
-{
-	_semihosting_enabled = false;
-}
-#endif
-
-/**
- * smh_errno() - Read the host's errno
- *
- * This gets the value of the host's errno and negates it. The host's errno may
- * or may not be set, so only call this function if a previous semihosting call
- * has failed.
- *
- * Return: a negative error value
- */
-static int smh_errno(void)
-{
-	long ret = smh_trap(SYSERRNO, NULL);
-
-	if (ret > 0 && ret < INT_MAX)
-		return -ret;
-	return -EIO;
-}
-
-long smh_open(const char *fname, enum smh_open_mode mode)
-{
-	long fd;
-	struct smh_open_s {
-		const char *fname;
-		unsigned long mode;
-		size_t len;
-	} open;
-
-	debug("%s: file \'%s\', mode \'%u\'\n", __func__, fname, mode);
-
-	open.fname = fname;
-	open.len = strlen(fname);
-	open.mode = mode;
-
-	/* Open the file on the host */
-	fd = smh_trap(SYSOPEN, &open);
-	if (fd == -1)
-		return smh_errno();
-	return fd;
-}
-
-/**
- * struct smg_rdwr_s - Arguments for read and write
- * @fd: A file descriptor returned from smh_open()
- * @memp: Pointer to a buffer of memory of at least @len bytes
- * @len: The number of bytes to read or write
- */
-struct smh_rdwr_s {
-	long fd;
-	void *memp;
-	size_t len;
-};
-
-long smh_read(long fd, void *memp, size_t len)
-{
-	long ret;
-	struct smh_rdwr_s read;
-
-	debug("%s: fd %ld, memp %p, len %zu\n", __func__, fd, memp, len);
-
-	read.fd = fd;
-	read.memp = memp;
-	read.len = len;
-
-	ret = smh_trap(SYSREAD, &read);
-	if (ret < 0)
-		return smh_errno();
-	return len - ret;
-}
-
-long smh_write(long fd, const void *memp, size_t len, ulong *written)
-{
-	long ret;
-	struct smh_rdwr_s write;
-
-	debug("%s: fd %ld, memp %p, len %zu\n", __func__, fd, memp, len);
-
-	write.fd = fd;
-	write.memp = (void *)memp;
-	write.len = len;
-
-	ret = smh_trap(SYSWRITE, &write);
-	*written = len - ret;
-	if (ret)
-		return smh_errno();
-	return 0;
-}
-
-long smh_close(long fd)
-{
-	long ret;
-
-	debug("%s: fd %ld\n", __func__, fd);
-
-	ret = smh_trap(SYSCLOSE, &fd);
-	if (ret == -1)
-		return smh_errno();
-	return 0;
-}
-
-long smh_flen(long fd)
-{
-	long ret;
-
-	debug("%s: fd %ld\n", __func__, fd);
-
-	ret = smh_trap(SYSFLEN, &fd);
-	if (ret == -1)
-		return smh_errno();
-	return ret;
-}
-
-long smh_seek(long fd, long pos)
-{
-	long ret;
-	struct smh_seek_s {
-		long fd;
-		long pos;
-	} seek;
-
-	debug("%s: fd %ld pos %ld\n", __func__, fd, pos);
-
-	seek.fd = fd;
-	seek.pos = pos;
-
-	ret = smh_trap(SYSSEEK, &seek);
-	if (ret)
-		return smh_errno();
-	return 0;
-}
-
-int smh_getc(void)
-{
-	return smh_trap(SYSREADC, NULL);
-}
-
-void smh_putc(char ch)
-{
-	smh_trap(SYSWRITEC, &ch);
-}
-
-void smh_puts(const char *s)
-{
-	smh_trap(SYSWRITE0, (char *)s);
-}

arch/arm/mach-rockchip/Kconfig

@@ -246,6 +246,7 @@ config ROCKCHIP_RK3399
 	select DM_PMIC
 	select DM_REGULATOR_FIXED
 	select BOARD_LATE_INIT
+	imply PARTITION_TYPE_GUID
 	imply PRE_CONSOLE_BUFFER
 	imply ROCKCHIP_COMMON_BOARD
 	imply ROCKCHIP_SDRAM_COMMON

arch/arm/mach-rockchip/board.c

@@ -6,11 +6,15 @@
 #include <clk.h>
 #include <cpu_func.h>
 #include <dm.h>
+#include <efi_loader.h>
 #include <fastboot.h>
 #include <init.h>
 #include <log.h>
+#include <mmc.h>
+#include <part.h>
 #include <ram.h>
 #include <syscon.h>
+#include <uuid.h>
 #include <asm/cache.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
@@ -22,8 +26,157 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) && defined(CONFIG_EFI_PARTITION)
+
+#define DFU_ALT_BUF_LEN			SZ_1K
+
+static struct efi_fw_image *fw_images;
+
+static bool updatable_image(struct disk_partition *info)
+{
+	int i;
+	bool ret = false;
+	efi_guid_t image_type_guid;
+
+	uuid_str_to_bin(info->type_guid, image_type_guid.b,
+			UUID_STR_FORMAT_GUID);
+
+	for (i = 0; i < num_image_type_guids; i++) {
+		if (!guidcmp(&fw_images[i].image_type_id, &image_type_guid)) {
+			ret = true;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static void set_image_index(struct disk_partition *info, int index)
+{
+	int i;
+	efi_guid_t image_type_guid;
+
+	uuid_str_to_bin(info->type_guid, image_type_guid.b,
+			UUID_STR_FORMAT_GUID);
+
+	for (i = 0; i < num_image_type_guids; i++) {
+		if (!guidcmp(&fw_images[i].image_type_id, &image_type_guid)) {
+			fw_images[i].image_index = index;
+			break;
+		}
+	}
+}
+
+static int get_mmc_desc(struct blk_desc **desc)
+{
+	int ret;
+	struct mmc *mmc;
+	struct udevice *dev;
+
+	/*
+	 * For now the firmware images are assumed to
+	 * be on the SD card
+	 */
+	ret = uclass_get_device(UCLASS_MMC, 1, &dev);
+	if (ret)
+		return -1;
+
+	mmc = mmc_get_mmc_dev(dev);
+	if (!mmc)
+		return -ENODEV;
+
+	if ((ret = mmc_init(mmc)))
+		return ret;
+
+	*desc = mmc_get_blk_desc(mmc);
+	if (!*desc)
+		return -1;
+
+	return 0;
+}
+
+void set_dfu_alt_info(char *interface, char *devstr)
+{
+	const char *name;
+	bool first = true;
+	int p, len, devnum, ret;
+	char buf[DFU_ALT_BUF_LEN];
+	struct disk_partition info;
+	struct blk_desc *desc = NULL;
+
+	ret = get_mmc_desc(&desc);
+	if (ret) {
+		log_err("Unable to get mmc desc\n");
+		return;
+	}
+
+	memset(buf, 0, sizeof(buf));
+	name = blk_get_uclass_name(desc->uclass_id);
+	devnum = desc->devnum;
+	len = strlen(buf);
+
+	len += snprintf(buf + len, DFU_ALT_BUF_LEN - len,
+			 "%s %d=", name, devnum);
+
+	for (p = 1; p <= MAX_SEARCH_PARTITIONS; p++) {
+		if (part_get_info(desc, p, &info))
+			continue;
+
+		/* Add entry to dfu_alt_info only for updatable images */
+		if (updatable_image(&info)) {
+			if (!first)
+				len += snprintf(buf + len,
+						DFU_ALT_BUF_LEN - len, ";");
+
+			len += snprintf(buf + len, DFU_ALT_BUF_LEN - len,
+					"%s%d_%s part %d %d",
+					name, devnum, info.name, devnum, p);
+			first = false;
+		}
+	}
+
+	log_debug("dfu_alt_info => %s\n", buf);
+	env_set("dfu_alt_info", buf);
+}
+
+static void gpt_capsule_update_setup(void)
+{
+	int p, i, ret;
+	struct disk_partition info;
+	struct blk_desc *desc = NULL;
+
+	fw_images = update_info.images;
+	rockchip_capsule_update_board_setup();
+
+	ret = get_mmc_desc(&desc);
+	if (ret) {
+		log_err("Unable to get mmc desc\n");
+		return;
+	}
+
+	for (p = 1, i = 1; p <= MAX_SEARCH_PARTITIONS; p++) {
+		if (part_get_info(desc, p, &info))
+			continue;
+
+		/*
+		 * Since we have a GPT partitioned device, the updatable
+		 * images could be stored in any order. Populate the
+		 * image_index at runtime.
+		 */
+		if (updatable_image(&info)) {
+			set_image_index(&info, i);
+			i++;
+		}
+	}
+}
+#endif /* CONFIG_EFI_HAVE_CAPSULE_SUPPORT && CONFIG_EFI_PARTITION */
+
 __weak int rk_board_late_init(void)
 {
+#if defined(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) && defined(CONFIG_EFI_PARTITION)
+	gpt_capsule_update_setup();
+#endif
+
 	return 0;
 }
 

arch/arm/mach-sunxi/board.c

@@ -73,7 +73,7 @@ phys_size_t board_get_usable_ram_top(phys_size_t total_size)
 
 	return gd->ram_top;
 }
-#endif
+#endif /* CONFIG_ARM64 */
 
 #ifdef CONFIG_SPL_BUILD
 static int gpio_init(void)
@@ -196,7 +196,7 @@ static int spl_board_load_image(struct spl_image_info *spl_image,
 	return 0;
 }
 SPL_LOAD_IMAGE_METHOD("FEL", 0, BOOT_DEVICE_BOARD, spl_board_load_image);
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 #define SUNXI_INVALID_BOOT_SOURCE	-1
 
@@ -457,7 +457,7 @@ void board_init_f(ulong dummy)
 #endif
 	sunxi_board_init();
 }
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 #if !CONFIG_IS_ENABLED(SYSRESET)
 void reset_cpu(void)
@@ -490,7 +490,7 @@ void reset_cpu(void)
 	while (1) { }
 #endif
 }
-#endif
+#endif /* CONFIG_SYSRESET */
 
 #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF) && defined(CONFIG_CPU_V7A)
 void enable_caches(void)

arch/arm/mach-sunxi/clock_sun6i.c

@@ -63,7 +63,7 @@ void clock_init_safe(void)
 	setbits_le32(&ccm->sata_clk_cfg, CCM_SATA_CTRL_ENABLE);
 #endif
 }
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 void clock_init_sec(void)
 {
@@ -172,7 +172,7 @@ void clock_set_pll1(unsigned int clk)
 		       &ccm->cpu_axi_cfg);
 	}
 }
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 void clock_set_pll3(unsigned int clk)
 {

arch/riscv/include/asm/spl.h

@@ -25,6 +25,7 @@ enum {
 	BOOT_DEVICE_DFU,
 	BOOT_DEVICE_XIP,
 	BOOT_DEVICE_BOOTROM,
+	BOOT_DEVICE_SMH,
 	BOOT_DEVICE_NONE
 };
 

arch/riscv/lib/Makefile

@@ -42,3 +42,5 @@ extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o
 obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
+
+obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o

arch/riscv/lib/interrupts.c

@@ -9,6 +9,7 @@
  * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
  */
 
+#include <linux/compat.h>
 #include <common.h>
 #include <efi_loader.h>
 #include <hang.h>
@@ -17,6 +18,7 @@
 #include <asm/ptrace.h>
 #include <asm/system.h>
 #include <asm/encoding.h>
+#include <semihosting.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -149,6 +151,29 @@ ulong handle_trap(ulong cause, ulong epc, ulong tval, struct pt_regs *regs)
 	/* An UEFI application may have changed gd. Restore U-Boot's gd. */
 	efi_restore_gd();
 
+	if (cause == CAUSE_BREAKPOINT &&
+	    CONFIG_IS_ENABLED(SEMIHOSTING_FALLBACK)) {
+		ulong pre_addr = epc - 4, post_addr = epc + 4;
+
+		/* Check for prior and post addresses to be in same page. */
+		if ((pre_addr & ~(PAGE_SIZE - 1)) ==
+			(post_addr & ~(PAGE_SIZE - 1))) {
+			u32 pre = *(u32 *)pre_addr;
+			u32 post = *(u32 *)post_addr;
+
+			/* Check for semihosting, i.e.:
+			 * slli    zero,zero,0x1f
+			 * ebreak
+			 * srai    zero,zero,0x7
+			 */
+			if (pre == 0x01f01013 && post == 0x40705013) {
+				disable_semihosting();
+				epc += 4;
+				return epc;
+			}
+		}
+	}
+
 	is_irq = (cause & MCAUSE_INT);
 	irq = (cause & ~MCAUSE_INT);
 

arch/riscv/lib/semihosting.c

@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <common.h>
+
+long smh_trap(int sysnum, void *addr)
+{
+	register int ret asm ("a0") = sysnum;
+	register void *param0 asm ("a1") = addr;
+
+	asm volatile (".align 4\n"
+		".option push\n"
+		".option norvc\n"
+
+		"slli zero, zero, 0x1f\n"
+		"ebreak\n"
+		"srai zero, zero, 7\n"
+		".option pop\n"
+		: "+r" (ret) : "r" (param0) : "memory");
+
+	return ret;
+}

arch/sandbox/cpu/sdl.c

@@ -441,7 +441,6 @@ void sandbox_sdl_fill_audio(void *udata, Uint8 *stream, int len)
 {
 	struct buf_info *buf;
 	int avail;
-	bool have_data = false;
 	int i;
 
 	for (i = 0; i < 2; i++) {
@@ -453,10 +452,9 @@ void sandbox_sdl_fill_audio(void *udata, Uint8 *stream, int len)
 		}
 		if (avail > len)
 			avail = len;
-		have_data = true;
 
-		SDL_MixAudio(stream, buf->data + buf->pos, avail,
+		memcpy(stream, buf->data + buf->pos, avail);
-			     SDL_MIX_MAXVOLUME);
+		stream += avail;
 		buf->pos += avail;
 		len -= avail;
 
@@ -466,7 +464,8 @@ void sandbox_sdl_fill_audio(void *udata, Uint8 *stream, int len)
 		else
 			break;
 	}
-	sdl.stopping = !have_data;
+	memset(stream, 0, len);
+	sdl.stopping = !!len;
 }
 
 int sandbox_sdl_sound_init(int rate, int channels)
@@ -484,7 +483,7 @@ int sandbox_sdl_sound_init(int rate, int channels)
 	wanted.freq = rate;
 	wanted.format = AUDIO_S16;
 	wanted.channels = channels;
-	wanted.samples = 1024;  /* Good low-latency value for callback */
+	wanted.samples = 960;  /* Good low-latency value for callback */
 	wanted.callback = sandbox_sdl_fill_audio;
 	wanted.userdata = NULL;
 

arch/sandbox/include/asm/test.h

@@ -188,6 +188,16 @@ int sandbox_get_setup_called(struct udevice *dev);
  */
 int sandbox_get_sound_active(struct udevice *dev);
 
+/**
+ * sandbox_get_sound_count() - Read back the count of the sound data so far
+ *
+ * This data is provided to the sandbox driver by the sound play() method.
+ *
+ * @dev: Device to check
+ * Return: count of audio data
+ */
+int sandbox_get_sound_count(struct udevice *dev);
+
 /**
  * sandbox_get_sound_sum() - Read back the sum of the sound data so far
  *

arch/x86/cpu/cpu.c

@@ -315,7 +315,7 @@ int reserve_arch(void)
 		if (IS_ENABLED(CONFIG_HAVE_FSP)) {
 			/*
 			 * Save stack address to CMOS so that at next S3 boot,
-			 * we can use it as the stack address for fsp_contiue()
+			 * we can use it as the stack address for fsp_continue()
 			 */
 			fsp_save_s3_stack();
 		}

arch/x86/include/asm/i8259.h

@@ -7,7 +7,7 @@
 /* i8259.h i8259 PIC Registers */
 
 #ifndef _ASMI386_I8259_H_
-#define _ASMI386_I8959_H_
+#define _ASMI386_I8259_H_
 
 /* PIC I/O mapped registers */
 #define IRR		0x0	/* Interrupt Request Register */
@@ -73,4 +73,4 @@
 
 int i8259_init(void);
 
-#endif /* _ASMI386_I8959_H_ */
+#endif /* _ASMI386_I8259_H_ */

board/Marvell/mvebu_armada-37xx/board.c

@@ -99,9 +99,16 @@ int board_late_init(void)
 	if (!of_machine_is_compatible("globalscale,espressobin"))
 		return 0;
 
-	/* Find free buffer in default_environment[] for new variables */
+	/*
-	while (*ptr != '\0' && *(ptr+1) != '\0') ptr++;
+	 * Find free space for new variables in default_environment[] array.
-	ptr += 2;
+	 * Free space is after the last variable, each variable is termined
+	 * by nul byte and after the last variable is additional nul byte.
+	 * Move ptr to the position where new variable can be filled.
+	 */
+	while (*ptr != '\0') {
+		do { ptr++; } while (*ptr != '\0');
+		ptr++;
+	}
 
 	/*
 	 * Ensure that 'env default -a' does not erase permanent MAC addresses
@@ -145,6 +152,13 @@ int board_late_init(void)
 		strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin-emmc.dtb");
 	else
 		strcpy(ptr, "fdtfile=marvell/armada-3720-espressobin.dtb");
+	ptr += strlen(ptr) + 1;
+
+	/*
+	 * After the last variable (which is nul term string) append another nul
+	 * byte which terminates the list. So everything after ptr is ignored.
+	 */
+	*ptr = '\0';
 
 	return 0;
 }

board/rockchip/evb_rk3399/evb-rk3399.c

@@ -5,11 +5,25 @@
 
 #include <common.h>
 #include <dm.h>
+#include <efi_loader.h>
 #include <init.h>
 #include <log.h>
 #include <asm/arch-rockchip/periph.h>
+#include <linux/kernel.h>
 #include <power/regulator.h>
 
+#define ROCKPI4_UPDATABLE_IMAGES	2
+
+#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
+static struct efi_fw_image fw_images[ROCKPI4_UPDATABLE_IMAGES] = {0};
+
+struct efi_capsule_update_info update_info = {
+	.images = fw_images,
+};
+
+u8 num_image_type_guids = ROCKPI4_UPDATABLE_IMAGES;
+#endif
+
 #ifndef CONFIG_SPL_BUILD
 int board_early_init_f(void)
 {
@@ -29,4 +43,43 @@ int board_early_init_f(void)
 out:
 	return 0;
 }
-#endif
+
+#if defined(CONFIG_EFI_HAVE_CAPSULE_SUPPORT) && defined(CONFIG_EFI_PARTITION)
+static bool board_is_rockpi_4b(void)
+{
+	return CONFIG_IS_ENABLED(TARGET_EVB_RK3399) &&
+		of_machine_is_compatible("radxa,rockpi4b");
+}
+
+static bool board_is_rockpi_4c(void)
+{
+	return CONFIG_IS_ENABLED(TARGET_EVB_RK3399) &&
+		of_machine_is_compatible("radxa,rockpi4c");
+}
+
+void rockchip_capsule_update_board_setup(void)
+{
+	if (board_is_rockpi_4b()) {
+		efi_guid_t idbldr_image_type_guid =
+			ROCKPI_4B_IDBLOADER_IMAGE_GUID;
+		efi_guid_t uboot_image_type_guid = ROCKPI_4B_UBOOT_IMAGE_GUID;
+
+		guidcpy(&fw_images[0].image_type_id, &idbldr_image_type_guid);
+		guidcpy(&fw_images[1].image_type_id, &uboot_image_type_guid);
+
+		fw_images[0].fw_name = u"ROCKPI4B-IDBLOADER";
+		fw_images[1].fw_name = u"ROCKPI4B-UBOOT";
+	} else if (board_is_rockpi_4c()) {
+		efi_guid_t idbldr_image_type_guid =
+			ROCKPI_4C_IDBLOADER_IMAGE_GUID;
+		efi_guid_t uboot_image_type_guid = ROCKPI_4C_UBOOT_IMAGE_GUID;
+
+		guidcpy(&fw_images[0].image_type_id, &idbldr_image_type_guid);
+		guidcpy(&fw_images[1].image_type_id, &uboot_image_type_guid);
+
+		fw_images[0].fw_name = u"ROCKPI4C-IDBLOADER";
+		fw_images[1].fw_name = u"ROCKPI4C-UBOOT";
+	}
+}
+#endif /* CONFIG_EFI_HAVE_CAPSULE_SUPPORT && CONFIG_EFI_PARTITION */
+#endif /* !CONFIG_SPL_BUILD */

board/sunxi/board.c

@@ -184,10 +184,6 @@ enum env_location env_get_location(enum env_operation op, int prio)
 	return ENVL_UNKNOWN;
 }
 
-#ifdef CONFIG_DM_MMC
-static void mmc_pinmux_setup(int sdc);
-#endif
-
 /* add board specific code here */
 int board_init(void)
 {
@@ -355,7 +351,7 @@ void board_nand_init(void)
 	sunxi_nand_init();
 #endif
 }
-#endif
+#endif /* CONFIG_NAND_SUNXI */
 
 #ifdef CONFIG_MMC
 static void mmc_pinmux_setup(int sdc)
@@ -525,9 +521,14 @@ static void mmc_pinmux_setup(int sdc)
 
 int board_mmc_init(struct bd_info *bis)
 {
+	/*
+	 * The BROM always accesses MMC port 0 (typically an SD card), and
+	 * most boards seem to have such a slot. The others haven't reported
+	 * any problem with unconditionally enabling this in the SPL.
+	 */
 	if (!IS_ENABLED(CONFIG_UART0_PORT_F)) {
-		mmc_pinmux_setup(CONFIG_MMC_SUNXI_SLOT);
+		mmc_pinmux_setup(0);
-		if (!sunxi_mmc_init(CONFIG_MMC_SUNXI_SLOT))
+		if (!sunxi_mmc_init(0))
 			return -1;
 	}
 
@@ -553,7 +554,7 @@ int mmc_get_env_dev(void)
 	}
 }
 #endif
-#endif
+#endif /* CONFIG_MMC */
 
 #ifdef CONFIG_SPL_BUILD
 
@@ -669,7 +670,7 @@ void sunxi_board_init(void)
 	else
 		printf("Failed to set core voltage! Can't set CPU frequency\n");
 }
-#endif
+#endif /* CONFIG_SPL_BUILD */
 
 #ifdef CONFIG_USB_GADGET
 int g_dnl_board_usb_cable_connected(void)
@@ -698,7 +699,7 @@ int g_dnl_board_usb_cable_connected(void)
 
 	return sun4i_usb_phy_vbus_detect(&phy);
 }
-#endif
+#endif /* CONFIG_USB_GADGET */
 
 #ifdef CONFIG_SERIAL_TAG
 void get_board_serial(struct tag_serialnr *serialnr)
@@ -927,7 +928,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 }
 
 #ifdef CONFIG_SPL_LOAD_FIT
-
 static void set_spl_dt_name(const char *name)
 {
 	struct boot_file_head *spl = get_spl_header(SPL_ENV_HEADER_VERSION);
@@ -995,4 +995,4 @@ int board_fit_config_name_match(const char *name)
 
 	return ret;
 }
-#endif
+#endif /* CONFIG_SPL_LOAD_FIT */

boot/pxe_utils.c

@@ -618,10 +618,7 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
 	 * Scenario 2: If there is an fdt_addr specified, pass it along to
 	 * bootm, and adjust argc appropriately.
 	 *
-	 * Scenario 3: If there is an fdtcontroladdr specified, pass it along to
+	 * Scenario 3: fdt blob is not available.
-	 * bootm, and adjust argc appropriately.
-	 *
-	 * Scenario 4: fdt blob is not available.
 	 */
 	bootm_argv[3] = env_get("fdt_addr_r");
 
@@ -729,9 +726,6 @@ static int label_boot(struct pxe_context *ctx, struct pxe_label *label)
 	if (!bootm_argv[3])
 		bootm_argv[3] = env_get("fdt_addr");
 
-	if (!bootm_argv[3])
-		bootm_argv[3] = env_get("fdtcontroladdr");
-
 	if (bootm_argv[3]) {
 		if (!bootm_argv[2])
 			bootm_argv[2] = "-";

cmd/mtd.c

@@ -434,19 +434,31 @@ static int do_mtd_erase(struct cmd_tbl *cmdtp, int flag, int argc,
 	erase_op.mtd = mtd;
 	erase_op.addr = off;
 	erase_op.len = mtd->erasesize;
-	erase_op.scrub = scrub;
 
 	while (len) {
-		ret = mtd_erase(mtd, &erase_op);
+		if (!scrub) {
+			ret = mtd_block_isbad(mtd, erase_op.addr);
+			if (ret < 0) {
+				printf("Failed to get bad block at 0x%08llx\n",
+				       erase_op.addr);
+				ret = CMD_RET_FAILURE;
+				goto out_put_mtd;
+			}
 
-		if (ret) {
+			if (ret > 0) {
-			/* Abort if its not a bad block error */
+				printf("Skipping bad block at 0x%08llx\n",
-			if (ret != -EIO)
+				       erase_op.addr);
-				break;
+				ret = 0;
-			printf("Skipping bad block at 0x%08llx\n",
+				len -= mtd->erasesize;
-			       erase_op.addr);
+				erase_op.addr += mtd->erasesize;
+				continue;
+			}
 		}
 
+		ret = mtd_erase(mtd, &erase_op);
+		if (ret && ret != -EIO)
+			break;
+
 		len -= mtd->erasesize;
 		erase_op.addr += mtd->erasesize;
 	}

cmd/nand.c

@@ -417,12 +417,14 @@ static void nand_print_and_set_info(int idx)
 		printf("%dx ", chip->numchips);
 	printf("%s, sector size %u KiB\n",
 	       mtd->name, mtd->erasesize >> 10);
-	printf("  Page size   %8d b\n", mtd->writesize);
+	printf("  Page size     %8d b\n", mtd->writesize);
-	printf("  OOB size    %8d b\n", mtd->oobsize);
+	printf("  OOB size      %8d b\n", mtd->oobsize);
-	printf("  Erase size  %8d b\n", mtd->erasesize);
+	printf("  Erase size    %8d b\n", mtd->erasesize);
-	printf("  subpagesize %8d b\n", chip->subpagesize);
+	printf("  ecc strength  %8d bits\n", mtd->ecc_strength);
-	printf("  options     0x%08x\n", chip->options);
+	printf("  ecc step size %8d b\n", mtd->ecc_step_size);
-	printf("  bbt options 0x%08x\n", chip->bbt_options);
+	printf("  subpagesize   %8d b\n", chip->subpagesize);
+	printf("  options       0x%08x\n", chip->options);
+	printf("  bbt options   0x%08x\n", chip->bbt_options);
 
 	/* Set geometry info */
 	env_set_hex("nand_writesize", mtd->writesize);

cmd/sound.c

@@ -86,5 +86,5 @@ U_BOOT_CMD(
 	sound, 4, 1, do_sound,
 	"sound sub-system",
 	"init - initialise the sound driver\n"
-	"sound play [len] [freq] - play a sound for len ms at freq hz\n"
+	"sound play [len [freq]] - play a sound for len ms at freq Hz\n"
 );

common/spl/Kconfig

@@ -691,7 +691,7 @@ config SPL_FS_FAT
 
 config SPL_FS_LOAD_PAYLOAD_NAME
 	string "File to load for U-Boot from the filesystem"
-	depends on SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS
+	depends on SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS || SPL_SEMIHOSTING
 	default "tispl.bin" if SYS_K3_SPL_ATF
 	default "u-boot.itb" if SPL_LOAD_FIT
 	default "u-boot.img"

common/spl/spl_legacy.c

@@ -106,7 +106,7 @@ int spl_load_legacy_img(struct spl_image_info *spl_image,
 		 * is set
 		 */
 		if (spl_image->flags & SPL_COPY_PAYLOAD_ONLY)
-			dataptr += sizeof(hdr);
+			dataptr += sizeof(*hdr);
 
 		load->read(load, dataptr, spl_image->size,
 			   (void *)(unsigned long)spl_image->load_addr);
@@ -116,7 +116,7 @@ int spl_load_legacy_img(struct spl_image_info *spl_image,
 		lzma_len = LZMA_LEN;
 
 		/* dataptr points to compressed payload  */
-		dataptr = offset + sizeof(hdr);
+		dataptr = offset + sizeof(*hdr);
 
 		debug("LZMA: Decompressing %08lx to %08lx\n",
 		      dataptr, spl_image->load_addr);

configs/A10-OLinuXino-Lime_defconfig

@@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A10s-OLinuXino-M_defconfig

@@ -9,7 +9,6 @@ CONFIG_MMC1_CD_PIN="PG13"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=1
 CONFIG_USB1_VBUS_PIN="PB10"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
@@ -17,6 +16,5 @@ CONFIG_SYS_I2C_SPEED=400000
 CONFIG_MII=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_AXP152_POWER=y
-CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

configs/A13-OLinuXinoM_defconfig

@@ -13,7 +13,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="PB10"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f
 CONFIG_SYS_I2C_SPEED=400000

configs/A13-OLinuXino_defconfig

@@ -15,7 +15,6 @@ CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

configs/A20-OLinuXino-Lime2-eMMC_defconfig

@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_SPL_SPI_SUNXI=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

configs/A20-OLinuXino-Lime2_defconfig

@@ -11,7 +11,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

configs/A20-OLinuXino-Lime_defconfig

@@ -9,7 +9,6 @@ CONFIG_I2C1_ENABLE=y
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A20-OLinuXino_MICRO-eMMC_defconfig

@@ -11,7 +11,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A20-OLinuXino_MICRO_defconfig

@@ -12,7 +12,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -12,7 +12,6 @@ CONFIG_USB0_VBUS_DET="PH5"
 CONFIG_SATAPWR="PC3"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A20-Olimex-SOM204-EVB-eMMC_defconfig

@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A20-Olimex-SOM204-EVB_defconfig

@@ -12,7 +12,6 @@ CONFIG_SATAPWR="PC3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/A33-OLinuXino_defconfig

@@ -16,6 +16,5 @@ CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_BL_EN="PB2"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_AXP_DCDC1_VOLT=3300
 CONFIG_USB_MUSB_HOST=y

configs/Ainol_AW1_defconfig

@@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Ampe_A76_defconfig

@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Auxtek-T003_defconfig

@@ -8,7 +8,6 @@ CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Auxtek-T004_defconfig

@@ -6,7 +6,6 @@ CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PG13"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Bananapi_M2_Ultra_defconfig

@@ -12,7 +12,6 @@ CONFIG_USB2_VBUS_PIN="PH23"
 # CONFIG_HAS_ARMV7_SECURE_BASE is not set
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Bananapi_defconfig

@@ -9,7 +9,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y

configs/Bananapi_m2m_defconfig

@@ -10,7 +10,6 @@ CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_USB0_ID_DET="PH8"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y

configs/Bananapro_defconfig

@@ -11,7 +11,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_NETCONSOLE=y
 CONFIG_SCSI_AHCI=y

configs/CHIP_defconfig

@@ -7,7 +7,6 @@ CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_CHIP_DIP_SCAN=y
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_DFU_RAM=y

configs/CHIP_pro_defconfig

@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_TIMINGS_DDR3_800E_1066G_1333J=y
 CONFIG_USB0_VBUS_PIN="PB10"
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y

configs/CSQ_CS908_defconfig

@@ -7,7 +7,6 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y

configs/Chuwi_V7_CW0825_defconfig

@@ -14,7 +14,6 @@ CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 CONFIG_VIDEO_LCD_PANEL_HITACHI_TX18D42VM=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Colombus_defconfig

@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_EN="PM1"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Cubieboard2_defconfig

@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Cubieboard4_defconfig

@@ -12,6 +12,5 @@ CONFIG_USB0_ID_DET="PH16"
 CONFIG_USB1_VBUS_PIN="PH14"
 CONFIG_USB3_VBUS_PIN="PH15"
 CONFIG_AXP_GPIO=y
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SYS_I2C_SUN8I_RSB=y
 CONFIG_AXP809_POWER=y

configs/Cubieboard_defconfig

@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Cubietruck_defconfig

@@ -13,7 +13,6 @@ CONFIG_SATAPWR="PH12"
 CONFIG_GMAC_TX_DELAY=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y

configs/Cubietruck_plus_defconfig

@@ -15,7 +15,6 @@ CONFIG_USB2_VBUS_PIN="PL6"
 CONFIG_I2C0_ENABLE=y
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_CONSOLE_MUX=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_MVTWSI=y

configs/Empire_electronix_d709_defconfig

@@ -16,7 +16,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Empire_electronix_m712_defconfig

@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Hummingbird_A31_defconfig

@@ -9,7 +9,6 @@ CONFIG_USB2_VBUS_PIN=""
 CONFIG_VIDEO_VGA_VIA_LCD=y
 CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN="PH25"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_RGMII=y

configs/Hyundai_A7HD_defconfig

@@ -15,7 +15,6 @@ CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW is not set
 CONFIG_VIDEO_LCD_PANEL_LVDS=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Itead_Ibox_A20_defconfig

@@ -8,7 +8,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_SATAPWR="PB8"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Lamobo_R1_defconfig

@@ -10,7 +10,6 @@ CONFIG_SATAPWR="PB3"
 CONFIG_GMAC_TX_DELAY=4
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Linksprite_pcDuino3_Nano_defconfig

@@ -10,7 +10,6 @@ CONFIG_SATAPWR="PH2"
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Linksprite_pcDuino3_defconfig

@@ -8,7 +8,6 @@ CONFIG_DRAM_ZQ=122
 CONFIG_SATAPWR="PH2"
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Linksprite_pcDuino_defconfig

@@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/MK808C_defconfig

@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/MSI_Primo73_defconfig

@@ -10,7 +10,6 @@ CONFIG_VIDEO_LCD_POWER="PH8"
 CONFIG_VIDEO_LCD_BL_EN="PH7"
 CONFIG_VIDEO_LCD_BL_PWM="PB2"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/MSI_Primo81_defconfig

@@ -13,7 +13,6 @@ CONFIG_VIDEO_LCD_BL_EN="PA25"
 CONFIG_VIDEO_LCD_BL_PWM="PH13"
 CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_AXP_DLDO1_VOLT=3300
 # CONFIG_REQUIRE_SERIAL_CONSOLE is not set
 CONFIG_USB_MUSB_HOST=y

configs/Marsboard_A10_defconfig

@@ -5,7 +5,6 @@ CONFIG_SPL=y
 CONFIG_MACH_SUN4I=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y
 CONFIG_SYS_I2C_MVTWSI=y

configs/Mele_A1000G_quad_defconfig

@@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y

configs/Mele_A1000_defconfig

@@ -8,7 +8,6 @@ CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Mele_I7_defconfig

@@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y

configs/Mele_M3_defconfig

@@ -9,7 +9,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=2
 CONFIG_VIDEO_VGA=y
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Mele_M5_defconfig

@@ -9,7 +9,6 @@ CONFIG_MMC0_CD_PIN="PH1"
 CONFIG_VIDEO_COMPOSITE=y
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Mele_M9_defconfig

@@ -7,7 +7,6 @@ CONFIG_DRAM_ZQ=120
 CONFIG_USB1_VBUS_PIN="PC27"
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y

configs/Merrii_A80_Optimus_defconfig

@@ -12,6 +12,5 @@ CONFIG_USB0_ID_DET="PH3"
 CONFIG_USB1_VBUS_PIN="PH4"
 CONFIG_USB3_VBUS_PIN="PH5"
 CONFIG_AXP_GPIO=y
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SYS_I2C_SUN8I_RSB=y
 CONFIG_AXP809_POWER=y

configs/Mini-X_defconfig

@@ -6,7 +6,6 @@ CONFIG_MACH_SUN4I=y
 CONFIG_USB0_VBUS_PIN="PB9"
 CONFIG_VIDEO_COMPOSITE=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_SYS_I2C_SLAVE=0x7f

configs/Nintendo_NES_Classic_Edition_defconfig

@@ -9,7 +9,6 @@ CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_AXP_GPIO=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_MTDPARTS=y
 # CONFIG_MMC is not set

configs/Orangepi_defconfig

@@ -12,7 +12,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Orangepi_mini_defconfig

@@ -14,7 +14,6 @@ CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_SPL_I2C=y
 CONFIG_SCSI_AHCI=y
 CONFIG_SYS_64BIT_LBA=y

configs/Sinlinx_SinA31s_defconfig

@@ -10,7 +10,6 @@ CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_USB1_VBUS_PIN=""
 CONFIG_USB2_VBUS_PIN=""
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_PHY_REALTEK=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_MII=y