ARM: legoev3: increase flash image sizes
This increases the kernel image to 4M and the rootfs image to 10M. It is getting hard to get a kernel image to fit in 3M. Signed-off-by: David Lechner <david@lechnology.com>
This commit is contained in:
parent
89d811eee6
commit
1374d88bf3
@ -14,8 +14,8 @@ see if there is a boot.scr file on the first FAT partition of the mmc. If there
|
||||
is, it will run the script and boot the kernel from the uImage file also in
|
||||
the FAT partition. Otherwise, it will load a kernel and rootfs from the flash.
|
||||
The kernel must be stored at address 0x50000 on the flash and have a maximum
|
||||
size of 3MiB. The rootfs must be a squasfs image and stored at 0x350000 in the
|
||||
flash and have a maximum size of 9.3MiB. The flash starting at 0xCB0000 is
|
||||
size of 4MiB. The rootfs must be a squasfs image and stored at 0x450000 in the
|
||||
flash and have a maximum size of 10MiB. The flash starting at 0xE50000 is
|
||||
reserved for user data.
|
||||
|
||||
Writing image to flash
|
||||
|
@ -164,7 +164,7 @@
|
||||
"mmcargs=setenv bootargs mem=${memsize} console=${console} root=/dev/mmcblk0p2 rw rootwait lpj=747520\0" \
|
||||
"mmcboot=bootm ${loadaddr}\0" \
|
||||
"flashargs=setenv bootargs mem=${memsize} initrd=${filesysaddr},${filesyssize} root=/dev/ram0 rw rootfstype=squashfs console=${console} lpj=747520\0" \
|
||||
"flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x300000; sf read ${filesysaddr} 0x350000 0x960000; bootm ${loadaddr}\0" \
|
||||
"flashboot=sf probe 0; sf read ${loadaddr} 0x50000 0x400000; sf read ${filesysaddr} 0x450000 0xA00000; bootm ${loadaddr}\0" \
|
||||
"loadimage=fatload mmc 0 ${loadaddr} uImage\0" \
|
||||
"loadbootscr=fatload mmc 0 ${bootscraddr} boot.scr\0" \
|
||||
"bootscript=source ${bootscraddr}\0" \
|
||||
|
Loading…
Reference in New Issue
Block a user