Add EV-iMX280-NANO-X-MB board
A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Oleh Kravchenko
Stefano Babic
parent
3675ac081a
commit
1180baec98
@ -923,9 +923,11 @@ OUT4-IMX6ULL-NANO BOARD
|
||||
M: Oleh Kravchenko <oleg@kaa.org.ua>
|
||||
S: Maintained
|
||||
T: git https://github.com/Oleh-Kravchenko/u-boot-out4.git
|
||||
F: arch/arm/dts/ev-imx280-nano-x-mb.dts
|
||||
F: arch/arm/dts/o4-imx-nano.dts
|
||||
F: arch/arm/dts/o4-imx6ull-nano.dtsi
|
||||
F: board/out4
|
||||
F: configs/ev-imx280-nano-x-mb_defconfig
|
||||
F: configs/o4-imx6ull-nano_defconfig
|
||||
F: include/configs/o4-imx6ull-nano.h
|
||||
|
||||
|
||||
@ -822,6 +822,9 @@ dtb-$(CONFIG_ARCH_MX6) += \
|
||||
dtb-$(CONFIG_O4_IMX_NANO) += \
|
||||
o4-imx-nano.dtb
|
||||
|
||||
dtb-$(CONFIG_EV_IMX280_NANO_X_MB) += \
|
||||
ev-imx280-nano-x-mb.dtb
|
||||
|
||||
dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \
|
||||
imx7d-sdb-qspi.dtb \
|
||||
imx7-cm.dtb \
|
||||
|
||||
109
arch/arm/dts/ev-imx280-nano-x-mb.dts
Normal file
109
arch/arm/dts/ev-imx280-nano-x-mb.dts
Normal file
@ -0,0 +1,109 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (C) 2021 Oleh Kravchenko <oleg@kaa.org.ua>
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "o4-imx6ull-nano.dtsi"
|
||||
|
||||
/ {
|
||||
model = "EV-iMX280-NANO-X-MB";
|
||||
compatible = "evodbg,ev-imx280-nano-x-mb",
|
||||
"out4,o4-imx6ull-nano",
|
||||
"fsl,imx6ull";
|
||||
|
||||
aliases {
|
||||
mmc1 = &usdhc1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart1;
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
pinctrl_uart1: uart1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usdhc1: usdhc1grp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10069
|
||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
||||
MX6UL_PAD_UART1_RTS_B__USDHC1_CD_B 0x03029
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_mdio: mdiogrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
||||
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
||||
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0xb0b0 /* RST */
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_usb_otg1_id: usbotg1idgrp {
|
||||
fsl,pins = <
|
||||
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&pinctrl_uart1>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usdhc1 {
|
||||
bus-width = <4>;
|
||||
no-1-8-v;
|
||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
&fec1 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-mode = "rmii";
|
||||
phy-reset-duration = <250>;
|
||||
phy-reset-post-delay = <100>;
|
||||
phy-reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-0 = <&pinctrl_fec1 &pinctrl_mdio>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
mdio {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@0 {
|
||||
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
||||
clock-names = "rmii-ref";
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-0 = <&pinctrl_phy0_irq>;
|
||||
pinctrl-names = "default";
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usbotg1 {
|
||||
dr_mode = "otg";
|
||||
pinctrl-0 = <&pinctrl_usb_otg1_id>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbotg2 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
@ -45,6 +45,12 @@ config O4_IMX_NANO
|
||||
A baseboard for EV-iMX280-NANO module:
|
||||
https://out4.ru/products/board/18-o4-imx-nano.html
|
||||
|
||||
config EV_IMX280_NANO_X_MB
|
||||
bool "EV-IMX280-NANO-X-MB"
|
||||
help
|
||||
A simple baseboard for EV-iMX280-NANO module:
|
||||
http://evodbg.net/products/mx28-eval-kits/14-ev-imx280-nano-x-mb.html
|
||||
|
||||
endchoice
|
||||
|
||||
config IMX_CONFIG
|
||||
@ -53,5 +59,6 @@ config IMX_CONFIG
|
||||
|
||||
config DEFAULT_DEVICE_TREE
|
||||
default "o4-imx-nano" if O4_IMX_NANO
|
||||
default "ev-imx280-nano-x-mb" if EV_IMX280_NANO_X_MB
|
||||
|
||||
endif
|
||||
|
||||
@ -39,6 +39,7 @@ static int setup_fec_clock(void)
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (!IS_ENABLED(CONFIG_EV_IMX280_NANO_X_MB)) {
|
||||
/*
|
||||
* Use 50M anatop loopback REF_CLK2 for ENET2,
|
||||
* clear gpr1[14], set gpr1[18].
|
||||
@ -49,6 +50,7 @@ static int setup_fec_clock(void)
|
||||
ret = enable_fec_anatop_clock(1, ENET_50MHZ);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
enable_enet_clk(1);
|
||||
}
|
||||
|
||||
91
configs/ev-imx280-nano-x-mb_defconfig
Normal file
91
configs/ev-imx280-nano-x-mb_defconfig
Normal file
@ -0,0 +1,91 @@
|
||||
CONFIG_ARCH_MX6=y
|
||||
CONFIG_ARM=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="ev-imx280-nano-x-mb"
|
||||
CONFIG_EV_IMX280_NANO_X_MB=y
|
||||
CONFIG_HUSH_PARSER=y
|
||||
CONFIG_IMX_MODULE_FUSE=y
|
||||
CONFIG_MX6ULL=y
|
||||
CONFIG_PINCTRL=y
|
||||
CONFIG_PINCTRL_IMX6=y
|
||||
CONFIG_SYS_TEXT_BASE=0x87800000
|
||||
CONFIG_TARGET_O4_IMX6ULL_NANO=y
|
||||
|
||||
CONFIG_K4B4G1646D_BCMA=y
|
||||
# CONFIG_MT41K256M16HA_125E is not set
|
||||
|
||||
# Device Tree
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_OF_LIBFDT_OVERLAY=y
|
||||
|
||||
# Environment
|
||||
CONFIG_ENV_FAT_DEVICE_AND_PART="0:1"
|
||||
CONFIG_ENV_IS_IN_FAT=y
|
||||
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
||||
|
||||
# Clock driver for imx6ull is not implemented
|
||||
# CONFIG_CLK_IMX6Q=y
|
||||
|
||||
# Thermal
|
||||
CONFIG_DM_THERMAL=y
|
||||
CONFIG_IMX_THERMAL=y
|
||||
|
||||
# Serial
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_MXC_UART=y
|
||||
|
||||
# eMMC support
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_FSL_USDHC=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_SUPPORT_EMMC_RPMB=y
|
||||
|
||||
# GPIO support
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_DM_GPIO=y
|
||||
CONFIG_MXC_GPIO=y
|
||||
|
||||
# USB support
|
||||
CONFIG_CI_UDC=y
|
||||
CONFIG_CMD_USB=y
|
||||
CONFIG_CMD_USB_MASS_STORAGE=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||
|
||||
# Fastboot support
|
||||
CONFIG_CMD_FASTBOOT=y
|
||||
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
||||
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
||||
CONFIG_FASTBOOT_FLASH=y
|
||||
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
||||
CONFIG_USB_FUNCTION_FASTBOOT=y
|
||||
|
||||
# Ethernet support
|
||||
CONFIG_CMD_DHCP=y
|
||||
CONFIG_CMD_MDIO=y
|
||||
CONFIG_CMD_MII=y
|
||||
CONFIG_CMD_PING=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_FEC_MXC=y
|
||||
CONFIG_MII=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHY_SMSC=y
|
||||
|
||||
# Watchdog support is broken
|
||||
# CONFIG_CMD_WDT=y
|
||||
# CONFIG_IMX_WATCHDOG=y
|
||||
# CONFIG_SYSRESET_WATCHDOG=y
|
||||
# CONFIG_WATCHDOG_RESET_DISABLE=y
|
||||
# CONFIG_WDT=y
|
||||
|
||||
# misc
|
||||
CONFIG_CMD_BOOTZ=y
|
||||
CONFIG_CMD_EXT4=y
|
||||
CONFIG_CMD_FAT=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_MEMINFO=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_CMD_PART=y
|
||||
Loading…
Reference in New Issue
Block a user