leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

nios: remove nios-32 arch

Browse Source 
The nios-32 arch is obsolete and broken. So it is removed.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
This commit is contained in:
Thomas Chou 2010-05-28 10:56:50 +08:00 committed by Scott McNutt
parent 6803336c9f
commit 1117cbf2ad
94 changed files with 4 additions and 12143 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
MAINTAINERS
View File

@ -841,22 +841,6 @@ Stefan Roese <sr@denx.de>
vct_xxx MIPS32 4Kc
#########################################################################
# Nios-32 Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Stephan Linz <linz@li-pro.net>
DK1S10 Nios-32
ADNPESC1 Nios-32
Scott McNutt <smcnutt@psyent.com>
DK1C20 Nios-32
#########################################################################
# Nios-II Systems: #
# #

17
MAKEALL
View File

@ -810,21 +810,6 @@ LIST_x86=" \
${LIST_I486} \
"
#########################################################################
## NIOS Systems
#########################################################################
LIST_nios=" \
ADNPESC1 \
ADNPESC1_base_32 \
ADNPESC1_DNPEVA2_base_32\
DK1C20 \
DK1C20_standard_32 \
DK1S10 \
DK1S10_standard_32 \
DK1S10_mtx_ldk_20 \
"
#########################################################################
## Nios-II Systems
#########################################################################
@ -1017,7 +1002,7 @@ do
|coldfire \
|microblaze \
|mips|mips_el \
|nios|nios2 \
|nios2 \
|ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
|sh|sh2|sh3|sh4 \
|sparc \

62
Makefile
View File

@ -3462,68 +3462,6 @@ purple_config : unconfig
#========================================================================
# Nios
#========================================================================
#########################################################################
## Nios32
#########################################################################
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
DK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
#########################################################################
## Nios-II

7
README
View File

@ -177,9 +177,6 @@ Directory Hierarchy:
/mips Files generic to MIPS architecture
/cpu CPU specific files
/lib Architecture specific library files
/nios Files generic to Altera NIOS architecture
/cpu CPU specific files
/lib Architecture specific library files
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/lib Architecture specific library files
@ -3337,8 +3334,8 @@ details; basically, the header defines the following image properties:
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
INTEGRITY).
* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point

29
arch/nios/config.mk
View File

@ -1,29 +0,0 @@
#
# (C) Copyright 2003
# Psyent Corporation <www.psyent.com>
# Scott McNutt <smcnutt@psyent.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
CROSS_COMPILE ?= nios-elf-
STANDALONE_LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32
PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -D__NIOS__ -ffixed-g7 -gstabs

48
arch/nios/cpu/Makefile
View File

@ -1,48 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(CPU).a
START = start.o
SOBJS = traps.o
COBJS = cpu.o interrupts.o serial.o asmi.o spi.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
START := $(addprefix $(obj),$(START))
all: $(obj).depend $(START) $(LIB)
$(LIB): $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

695
arch/nios/cpu/asmi.c
View File

@ -1,695 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_NIOS_ASMI)
#include <command.h>
#include <nios-io.h>
#if !defined(CONFIG_SYS_NIOS_ASMIBASE)
#error "*** CONFIG_SYS_NIOS_ASMIBASE not defined ***"
#endif
/*-----------------------------------------------------------------------*/
#define SHORT_HELP\
"asmi - read/write Cyclone ASMI configuration device.\n"
#define LONG_HELP\
"\n"\
"asmi erase start [end]\n"\
" - erase sector start or sectors start through end.\n"\
"asmi info\n"\
" - display ASMI device information.\n"\
"asmi protect on | off\n"\
" - turn device protection on or off.\n"\
"asmi read addr offset count\n"\
" - read count bytes from offset to addr.\n"\
"asmi write addr offset count\n"\
" - write count bytes to offset from addr.\n"\
"asmi verify addr offset count\n"\
" - verify count bytes at offset from addr."
/*-----------------------------------------------------------------------*/
/* Operation codes for serial configuration devices
*/
#define ASMI_WRITE_ENA 0x06 /* Write enable */
#define ASMI_WRITE_DIS 0x04 /* Write disable */
#define ASMI_READ_STAT 0x05 /* Read status */
#define ASMI_READ_BYTES 0x03 /* Read bytes */
#define ASMI_READ_ID 0xab /* Read silicon id */
#define ASMI_WRITE_STAT 0x01 /* Write status */
#define ASMI_WRITE_BYTES 0x02 /* Write bytes */
#define ASMI_ERASE_BULK 0xc7 /* Erase entire device */
#define ASMI_ERASE_SECT 0xd8 /* Erase sector */
/* Device status register bits
*/
#define ASMI_STATUS_WIP (1<<0) /* Write in progress */
#define ASMI_STATUS_WEL (1<<1) /* Write enable latch */
static nios_asmi_t *asmi = (nios_asmi_t *)CONFIG_SYS_NIOS_ASMIBASE;
/***********************************************************************
* Device access
***********************************************************************/
static void asmi_cs (int assert)
{
if (assert) {
asmi->control |= NIOS_ASMI_SSO;
} else {
/* Let all bits shift out */
while ((asmi->status & NIOS_ASMI_TMT) == 0)
;
asmi->control &= ~NIOS_ASMI_SSO;
}
}
static void asmi_tx (unsigned char c)
{
while ((asmi->status & NIOS_ASMI_TRDY) == 0)
;
asmi->txdata = c;
}
static int asmi_rx (void)
{
while ((asmi->status & NIOS_ASMI_RRDY) == 0)
;
return (asmi->rxdata);
}
static unsigned char bitrev[] = {
0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e,
0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f
};
static unsigned char asmi_bitrev( unsigned char c )
{
unsigned char val;
val = bitrev[c>>4];
val |= bitrev[c & 0x0f]<<4;
return (val);
}
static void asmi_rcv (unsigned char *dst, int len)
{
while (len--) {
asmi_tx (0);
*dst++ = asmi_rx ();
}
}
static void asmi_rrcv (unsigned char *dst, int len)
{
while (len--) {
asmi_tx (0);
*dst++ = asmi_bitrev (asmi_rx ());
}
}
static void asmi_snd (unsigned char *src, int len)
{
while (len--) {
asmi_tx (*src++);
asmi_rx ();
}
}
static void asmi_rsnd (unsigned char *src, int len)
{
while (len--) {
asmi_tx (asmi_bitrev (*src++));
asmi_rx ();
}
}
static void asmi_wr_enable (void)
{
asmi_cs (1);
asmi_tx (ASMI_WRITE_ENA);
asmi_rx ();
asmi_cs (0);
}
static unsigned char asmi_status_rd (void)
{
unsigned char status;
asmi_cs (1);
asmi_tx (ASMI_READ_STAT);
asmi_rx ();
asmi_tx (0);
status = asmi_rx ();
asmi_cs (0);
return (status);
}
static void asmi_status_wr (unsigned char status)
{
asmi_wr_enable ();
asmi_cs (1);
asmi_tx (ASMI_WRITE_STAT);
asmi_rx ();
asmi_tx (status);
asmi_rx ();
asmi_cs (0);
return;
}
/***********************************************************************
* Device information
***********************************************************************/
typedef struct asmi_devinfo_t {
const char *name; /* Device name */
unsigned char id; /* Device silicon id */
unsigned char size; /* Total size log2(bytes)*/
unsigned char num_sects; /* Number of sectors */
unsigned char sz_sect; /* Sector size log2(bytes) */
unsigned char sz_page; /* Page size log2(bytes) */
unsigned char prot_mask; /* Protection mask */
}asmi_devinfo_t;
static struct asmi_devinfo_t devinfo[] = {
{ "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c },
{ "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c },
{ 0, 0, 0, 0, 0, 0 }
};
static asmi_devinfo_t *asmi_dev_find (void)
{
unsigned char buf[4];
unsigned char id;
int i;
struct asmi_devinfo_t *dev = NULL;
/* Read silicon id requires 3 "dummy bytes" before it's put
* on the wire.
*/
buf[0] = ASMI_READ_ID;
buf[1] = 0;
buf[2] = 0;
buf[3] = 0;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rcv (buf,1);
asmi_cs (0);
id = buf[0];
/* Find the info struct */
i = 0;
while (devinfo[i].name) {
if (id == devinfo[i].id) {
dev = &devinfo[i];
break;
}
i++;
}
return (dev);
}
/***********************************************************************
* Misc Utilities
***********************************************************************/
static unsigned asmi_cfgsz (void)
{
unsigned sz = 0;
unsigned char buf[128];
unsigned char *p;
/* Read in the first 128 bytes of the device */
buf[0] = ASMI_READ_BYTES;
buf[1] = 0;
buf[2] = 0;
buf[3] = 0;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rrcv (buf, sizeof(buf));
asmi_cs (0);
/* Search for the starting 0x6a which is followed by the
* 4-byte 'register' and 4-byte bit-count.
*/
p = buf;
while (p < buf + sizeof(buf)-8) {
if ( *p == 0x6a ) {
/* Point to bit count and extract */
p += 5;
sz = *p++;
sz |= *p++ << 8;
sz |= *p++ << 16;
sz |= *p++ << 24;
/* Convert to byte count */
sz += 7;
sz >>= 3;
} else if (*p == 0xff) {
/* 0xff is ok ... just skip */
p++;
continue;
} else {
/* Not 0xff or 0x6a ... something's not
* right ... report 'unknown' (sz=0).
*/
break;
}
}
return (sz);
}
static int asmi_erase (unsigned start, unsigned end)
{
unsigned off, sectsz;
unsigned char buf[4];
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (!dev || (start>end))
return (-1);
/* Erase the requested sectors. An address is required
* that lies within the requested sector -- we'll just
* use the first address in the sector.
*/
printf ("asmi erasing sector %d ", start);
if (start != end)
printf ("to %d ", end);
sectsz = (1 << dev->sz_sect);
while (start <= end) {
off = start * sectsz;
start++;
buf[0] = ASMI_ERASE_SECT;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_wr_enable ();
asmi_cs (1);
asmi_snd (buf,4);
asmi_cs (0);
printf ("."); /* Some user feedback */
/* Wait for erase to complete */
while (asmi_status_rd() & ASMI_STATUS_WIP)
;
}
printf (" done.\n");
return (0);
}
static int asmi_read (ulong addr, ulong off, ulong cnt)
{
unsigned char buf[4];
buf[0] = ASMI_READ_BYTES;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_cs (1);
asmi_snd (buf,4);
asmi_rrcv ((unsigned char *)addr, cnt);
asmi_cs (0);
return (0);
}
static
int asmi_write (ulong addr, ulong off, ulong cnt)
{
ulong wrcnt;
unsigned pgsz;
unsigned char buf[4];
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (!dev)
return (-1);
pgsz = (1<<dev->sz_page);
while (cnt) {
if (off % pgsz)
wrcnt = pgsz - (off % pgsz);
else
wrcnt = pgsz;
wrcnt = (wrcnt > cnt) ? cnt : wrcnt;
buf[0] = ASMI_WRITE_BYTES;
buf[1] = off >> 16;
buf[2] = off >> 8;
buf[3] = off;
asmi_wr_enable ();
asmi_cs (1);
asmi_snd (buf,4);
asmi_rsnd ((unsigned char *)addr, wrcnt);
asmi_cs (0);
/* Wait for write to complete */
while (asmi_status_rd() & ASMI_STATUS_WIP)
;
cnt -= wrcnt;
off += wrcnt;
addr += wrcnt;
}
return (0);
}
static
int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err)
{
ulong rdcnt;
unsigned char buf[256];
unsigned char *start,*end;
int i;
start = end = (unsigned char *)addr;
while (cnt) {
rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt;
asmi_read ((ulong)buf, off, rdcnt);
for (i=0; i<rdcnt; i++) {
if (*end != buf[i]) {
*err = end - start;
return(-1);
}
end++;
}
cnt -= rdcnt;
off += rdcnt;
}
return (0);
}
static int asmi_sect_erased (int sect, unsigned *offset,
struct asmi_devinfo_t *dev)
{
unsigned char buf[128];
unsigned off, end;
unsigned sectsz;
int i;
sectsz = (1 << dev->sz_sect);
off = sectsz * sect;
end = off + sectsz;
while (off < end) {
asmi_read ((ulong)buf, off, sizeof(buf));
for (i=0; i < sizeof(buf); i++) {
if (buf[i] != 0xff) {
*offset = off + i;
return (0);
}
}
off += sizeof(buf);
}
return (1);
}
/***********************************************************************
* Commands
***********************************************************************/
static
void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
int i;
unsigned char stat;
unsigned tmp;
int erased;
/* Basic device info */
printf ("%s: %d kbytes (%d sectors x %d kbytes,"
" %d bytes/page)\n",
dev->name, 1 << (dev->size-10),
dev->num_sects, 1 << (dev->sz_sect-10),
1 << dev->sz_page );
/* Status -- for now protection is all-or-nothing */
stat = asmi_status_rd();
printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
stat,
(stat & ASMI_STATUS_WIP) ? 1 : 0,
(stat & ASMI_STATUS_WEL) ? 1 : 0,
(stat & dev->prot_mask) ? "on" : "off" );
/* Configuration */
tmp = asmi_cfgsz ();
if (tmp) {
printf ("config: 0x%06x (%d) bytes\n", tmp, tmp );
} else {
printf ("config: unknown\n" );
}
/* Sector info */
for (i=0; i<dev->num_sects; i++) {
erased = asmi_sect_erased (i, &tmp, dev);
printf (" %d: %06x ",
i, i*(1<<dev->sz_sect) );
if (erased)
printf ("erased\n");
else
printf ("data @ 0x%06x\n", tmp);
}
return;
}
static
void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
unsigned start,end;
if ((argc < 3) || (argc > 4)) {
printf ("USAGE: asmi erase sect [end]\n");
return;
}
if ((asmi_status_rd() & dev->prot_mask) != 0) {
printf ( "asmi: device protected.\n");
return;
}
start = simple_strtoul (argv[2], NULL, 10);
if (argc > 3)
end = simple_strtoul (argv[3], NULL, 10);
else
end = start;
if ((start >= dev->num_sects) || (start > end)) {
printf ("asmi: invalid sector range: [%d:%d]\n",
start, end );
return;
}
asmi_erase (start, end);
return;
}
static
void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
unsigned char stat;
/* For now protection is all-or-nothing to keep things
* simple. The protection bits don't map in a linear
* fashion ... and we would rather protect the bottom
* of the device since it contains the config data and
* leave the top unprotected for app use. But unfortunately
* protection works from top-to-bottom so it does
* really help very much from a software app point-of-view.
*/
if (argc < 3) {
printf ("USAGE: asmi protect on | off\n");
return;
}
if (!dev)
return;
/* Protection on/off is just a matter of setting/clearing
* all protection bits in the status register.
*/
stat = asmi_status_rd ();
if (strcmp ("on", argv[2]) == 0) {
stat |= dev->prot_mask;
} else if (strcmp ("off", argv[2]) == 0 ) {
stat &= ~dev->prot_mask;
} else {
printf ("asmi: unknown protection: %s\n", argv[2]);
return;
}
asmi_status_wr (stat);
return;
}
static
void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
if (argc < 5) {
printf ("USAGE: asmi read addr offset count\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n",
addr, off, cnt);
asmi_read (addr, off, cnt);
return;
}
static
void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
ulong err;
if (argc < 5) {
printf ("USAGE: asmi write addr offset count\n");
return;
}
if ((asmi_status_rd() & dev->prot_mask) != 0) {
printf ( "asmi: device protected.\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n",
addr, off, cnt);
asmi_write (addr, off, cnt);
if (asmi_verify (addr, off, cnt, &err) != 0)
printf ("asmi: write error at offset %06lx\n", err);
return;
}
static
void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[])
{
ulong addr,off,cnt;
ulong sz;
ulong err;
if (argc < 5) {
printf ("USAGE: asmi verify addr offset count\n");
return;
}
sz = 1 << dev->size;
addr = simple_strtoul (argv[2], NULL, 16);
off = simple_strtoul (argv[3], NULL, 16);
cnt = simple_strtoul (argv[4], NULL, 16);
if (off > sz) {
printf ("offset is greater than device size"
"... aborting.\n");
return;
}
if ((off + cnt) > sz) {
printf ("request exceeds device size"
"... truncating.\n");
cnt = sz - off;
}
printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n",
addr, off, cnt);
if (asmi_verify (addr, off, cnt, &err) != 0)
printf ("asmi: verify error at offset %06lx\n", err);
return;
}
/*-----------------------------------------------------------------------*/
int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int len;
struct asmi_devinfo_t *dev = asmi_dev_find ();
if (argc < 2) {
printf ("Usage:%s", LONG_HELP);
return (0);
}
if (!dev) {
printf ("asmi: device not found.\n");
return (0);
}
len = strlen (argv[1]);
if (strncmp ("info", argv[1], len) == 0) {
do_asmi_info ( dev, argc, argv);
} else if (strncmp ("erase", argv[1], len) == 0) {
do_asmi_erase (dev, argc, argv);
} else if (strncmp ("protect", argv[1], len) == 0) {
do_asmi_protect (dev, argc, argv);
} else if (strncmp ("read", argv[1], len) == 0) {
do_asmi_read (dev, argc, argv);
} else if (strncmp ("write", argv[1], len) == 0) {
do_asmi_write (dev, argc, argv);
} else if (strncmp ("verify", argv[1], len) == 0) {
do_asmi_verify (dev, argc, argv);
} else {
printf ("asmi: unknown operation: %s\n", argv[1]);
}
return (0);
}
/*-----------------------------------------------------------------------*/
U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP );
#endif /* CONFIG_NIOS_ASMI */

24
arch/nios/cpu/config.mk
View File

@ -1,24 +0,0 @@
#
# (C) Copyright 2000
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
PLATFORM_RELFLAGS +=

78
arch/nios/cpu/cpu.c
View File

@ -1,78 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nios.h>
int checkcpu (void)
{
unsigned val;
unsigned rev_major;
unsigned rev_minor;
short nregs, hi_limit, lo_limit;
/* Get cpu version info */
val = rdctl (CTL_CPU_ID);
puts ("CPU: ");
printf ("%s", (val & 0x00008000) ? "Nios-16 " : "Nios-32 ");
rev_major = (val>>12) & 0x07;
rev_minor = (val>>4) & 0x0ff;
printf ("Rev. %d.%d (0x%04x)", rev_major, rev_minor,
val & 0xffff);
if (rev_major == 0x08)
printf (" [OpenCore (R) Plus]");
printf ("\n");
/* Check register file */
val = rdctl (CTL_WVALID);
lo_limit = val & 0x01f;
hi_limit = (val>>5) & 0x1f;
nregs = (hi_limit + 2) * 16;
printf ("Reg file size: %d LO_LIMIT/HI_LIMIT: %d/%d\n",
nregs, lo_limit, hi_limit);
return (0);
}
int do_reset (void)
{
/* trap 0 does the trick ... at least with the OCI debug
* present -- haven't tested without it yet (stm).
*/
disable_interrupts ();
ipri (1);
asm volatile ("trap 0\n");
/* No return ;-) */
return(0);
}
#if defined(CONFIG_WATCHDOG)
void watchdog_reset (void)
{
}
#endif /* CONFIG_WATCHDOG */

196
arch/nios/cpu/interrupts.c
View File

@ -1,196 +0,0 @@
/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <nios.h>
#include <nios-io.h>
#include <asm/ptrace.h>
#include <common.h>
#include <command.h>
#include <watchdog.h>
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
/****************************************************************************/
struct irq_action {
interrupt_handler_t *handler;
void *arg;
int count;
};
static struct irq_action irq_vecs[64];
/*************************************************************************/
volatile ulong timestamp = 0;
void reset_timer (void)
{
timestamp = 0;
}
ulong get_timer (ulong base)
{
WATCHDOG_RESET ();
return (timestamp - base);
}
void set_timer (ulong t)
{
timestamp = t;
}
/* The board must handle this interrupt if a timer is not
* provided.
*/
#if defined(CONFIG_SYS_NIOS_TMRBASE)
void timer_interrupt (struct pt_regs *regs)
{
/* Interrupt is cleared by writing anything to the
* status register.
*/
nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
tmr->status = 0;
timestamp += CONFIG_SYS_NIOS_TMRMS;
#ifdef CONFIG_STATUS_LED
status_led_tick(timestamp);
#endif
}
#endif
/*************************************************************************/
int disable_interrupts (void)
{
int val = 0;
/* Writing anything to CLR_IE disables interrupts */
val = rdctl (CTL_STATUS);
wrctl (CTL_CLR_IE, 0);
return (val & STATUS_IE);
}
void enable_interrupts( void )
{
/* Writing anything SET_IE enables interrupts */
wrctl (CTL_SET_IE, 0);
}
void external_interrupt (struct pt_regs *regs)
{
unsigned vec;
vec = (regs->status & STATUS_IPRI) >> 9; /* ipri */
irq_vecs[vec].count++;
if (irq_vecs[vec].handler != NULL) {
(*irq_vecs[vec].handler)(irq_vecs[vec].arg);
} else {
/* A sad side-effect of masking a bogus interrupt is
* that lower priority interrupts will also be disabled.
* This is probably not what we want ... so hang insted.
*/
printf ("Unhandled interrupt: 0x%x\n", vec);
disable_interrupts ();
hang ();
}
}
/*************************************************************************/
int interrupt_init (void)
{
int vec;
#if defined(CONFIG_SYS_NIOS_TMRBASE)
nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
tmr->control &= ~NIOS_TIMER_ITO;
tmr->control |= NIOS_TIMER_STOP;
#if defined(CONFIG_SYS_NIOS_TMRCNT)
tmr->periodl = CONFIG_SYS_NIOS_TMRCNT & 0xffff;
tmr->periodh = (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff;
#endif
#endif
for (vec=0; vec<64; vec++ ) {
irq_vecs[vec].handler = NULL;
irq_vecs[vec].arg = NULL;
irq_vecs[vec].count = 0;
}
/* Need timus interruptus -- start the lopri timer */
#if defined(CONFIG_SYS_NIOS_TMRBASE)
tmr->control |= ( NIOS_TIMER_ITO |
NIOS_TIMER_CONT |
NIOS_TIMER_START );
ipri (CONFIG_SYS_NIOS_TMRIRQ + 1);
#endif
enable_interrupts ();
return (0);
}
void irq_install_handler (int vec, interrupt_handler_t *handler, void *arg)
{
struct irq_action *irqa = irq_vecs;
int i = vec;
int flag;
if (irqa[i].handler != NULL) {
printf ("Interrupt vector %d: handler 0x%x "
"replacing 0x%x\n",
vec, (uint)handler, (uint)irqa[i].handler);
}
flag = disable_interrupts ();
irqa[i].handler = handler;
irqa[i].arg = arg;
if (flag )
enable_interrupts ();
}
/*************************************************************************/
#if defined(CONFIG_CMD_IRQ)
int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int vec;
printf ("\nInterrupt-Information:\n");
printf ("Nr Routine Arg Count\n");
for (vec=0; vec<64; vec++) {
if (irq_vecs[vec].handler != NULL) {
printf ("%02d %08lx %08lx %d\n",
vec,
(ulong)irq_vecs[vec].handler<<1,
(ulong)irq_vecs[vec].arg,
irq_vecs[vec].count);
}
}
return (0);
}
#endif

135
arch/nios/cpu/serial.c
View File

@ -1,135 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <nios-io.h>
DECLARE_GLOBAL_DATA_PTR;
/*------------------------------------------------------------------
* JTAG acts as the serial port
*-----------------------------------------------------------------*/
#if defined(CONFIG_CONSOLE_JTAG)
static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
void serial_setbrg( void ){ return; }
int serial_init( void ) { return(0);}
void serial_putc (char c)
{
while ((jtag->txcntl & NIOS_JTAG_TRDY) != 0)
WATCHDOG_RESET ();
jtag->txcntl = NIOS_JTAG_TRDY | (unsigned char)c;
}
void serial_puts (const char *s)
{
while (*s != 0)
serial_putc (*s++);
}
int serial_tstc (void)
{
return (jtag->rxcntl & NIOS_JTAG_RRDY);
}
int serial_getc (void)
{
int c;
while (serial_tstc() == 0)
WATCHDOG_RESET ();
c = jtag->rxcntl & 0x0ff;
jtag->rxcntl = 0;
return (c);
}
/*------------------------------------------------------------------
* UART the serial port
*-----------------------------------------------------------------*/
#else
static nios_uart_t *uart = (nios_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
/* Everything's already setup for fixed-baud PTF
* assignment
*/
void serial_setbrg (void){ return; }
int serial_init (void) { return (0);}
#else
void serial_setbrg (void)
{
unsigned div;
div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
uart->divisor = div;
return;
}
int serial_init (void)
{
serial_setbrg ();
return (0);
}
#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
/*-----------------------------------------------------------------------
* UART CONSOLE
*---------------------------------------------------------------------*/
void serial_putc (char c)
{
if (c == '\n')
serial_putc ('\r');
while ((uart->status & NIOS_UART_TRDY) == 0)
WATCHDOG_RESET ();
uart->txdata = (unsigned char)c;
}
void serial_puts (const char *s)
{
while (*s != 0) {
serial_putc (*s++);
}
}
int serial_tstc (void)
{
return (uart->status & NIOS_UART_RRDY);
}
int serial_getc (void)
{
while (serial_tstc () == 0)
WATCHDOG_RESET ();
return( uart->rxdata & 0x00ff );
}
#endif /* CONFIG_JTAG_CONSOLE */

195
arch/nios/cpu/spi.c
View File

@ -1,195 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <linux/ctype.h>
#if defined(CONFIG_NIOS_SPI)
#include <nios-io.h>
#include <spi.h>
#if !defined(CONFIG_SYS_NIOS_SPIBASE)
#error "*** CONFIG_SYS_NIOS_SPIBASE not defined ***"
#endif
#if !defined(CONFIG_SYS_NIOS_SPIBITS)
#error "*** CONFIG_SYS_NIOS_SPIBITS not defined ***"
#endif
#if (CONFIG_SYS_NIOS_SPIBITS != 8) && (CONFIG_SYS_NIOS_SPIBITS != 16)
#error "*** CONFIG_SYS_NIOS_SPIBITS should be either 8 or 16 ***"
#endif
static nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
/* Warning:
* You cannot enable DEBUG for early system initalization, i. e. when
* this driver is used to read environment parameters like "baudrate"
* from EEPROM which are used to initialize the serial port which is
* needed to print the debug messages...
*/
#undef DEBUG
#ifdef DEBUG
#define DPRINT(a) printf a;
/* -----------------------------------------------
* Helper functions to peek into tx and rx buffers
* ----------------------------------------------- */
static const char * const hex_digit = "0123456789ABCDEF";
static char quickhex (int i)
{
return hex_digit[i];
}
static void memdump (const void *pv, int num)
{
int i;
const unsigned char *pc = (const unsigned char *) pv;
for (i = 0; i < num; i++)
printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
printf ("\t");
for (i = 0; i < num; i++)
printf ("%c", isprint (pc[i]) ? pc[i] : '.');
printf ("\n");
}
#else /* !DEBUG */
#define DPRINT(a)
#define memdump(p,n)
#endif /* DEBUG */
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct spi_slave *slave;
if (!spi_cs_is_valid(bus, cs))
return NULL;
slave = malloc(sizeof(struct spi_slave));
if (!slave)
return NULL;
slave->bus = bus;
slave->cs = cs;
/* TODO: Add support for different modes and speeds */
return slave;
}
void spi_free_slave(struct spi_slave *slave)
{
free(slave);
}
int spi_claim_bus(struct spi_slave *slave)
{
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
}
/*
* SPI transfer:
*
* See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
* for more informations.
*/
int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
void *din, unsigned long flags)
{
const u8 *txd = dout;
u8 *rxd = din;
int j;
DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
memdump(dout, (bitlen + 7) / 8);
if (flags & SPI_XFER_BEGIN)
spi_cs_activate(slave);
if (!(flags & SPI_XFER_END) || bitlen > CONFIG_SYS_NIOS_SPIBITS) {
/* leave chip select active */
spi->control |= NIOS_SPI_SSO;
}
for ( j = 0; /* count each byte in */
j < ((bitlen + 7) / 8); /* dout[] and din[] */
#if (CONFIG_SYS_NIOS_SPIBITS == 8)
j++) {
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
spi->txdata = (unsigned)(txd[j]);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
rxd[j] = (unsigned char)(spi->rxdata & 0xff);
#elif (CONFIG_SYS_NIOS_SPIBITS == 16)
j++, j++) {
while ((spi->status & NIOS_SPI_TRDY) == 0)
;
if ((j+1) < ((bitlen + 7) / 8))
spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
else
spi->txdata = (unsigned)(txd[j] << 8);
while ((spi->status & NIOS_SPI_RRDY) == 0)
;
rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
if ((j+1) < ((bitlen + 7) / 8))
rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
#else
#error "*** unsupported value of CONFIG_SYS_NIOS_SPIBITS ***"
#endif
}
if (bitlen > CONFIG_SYS_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
spi->control &= ~NIOS_SPI_SSO;
}
if (flags & SPI_XFER_END)
spi_cs_deactivate(slave);
memdump(din, (bitlen + 7) / 8);
return 0;
}
#endif /* CONFIG_NIOS_SPI */

238
arch/nios/cpu/start.S
View File

@ -1,238 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <timestamp.h>
#include <version.h>
#if !defined(CONFIG_IDENT_STRING)
#define CONFIG_IDENT_STRING ""
#endif
#define STATUS_INIT 0x8600 /* IE=1, IPRI=2 */
/*************************************************************************
* RESTART
************************************************************************/
.text
.global _start
_start:
bsr 0f
nop
.long _start
/* GERMS -- The "standard-32" configuration GERMS monitor looks
* for the string "Nios" at flash_base + 0xc (actually it only
* tests for 'N', 'i'). You can leave support for this in place
* as it's only a few words.
*/
. = _start + 0x000c
.string "Nios"
.align 4
0:
/*
* Early setup -- set cwp = HI_LIMIT, IPRI = 2, IE = 1 to
* enable underflow exceptions. Disable cache.
* NOTE: %o7 has return addr -- save in %g7 use later.
*/
mov %g7, %o7
pfx 2 /* WVALID */
rdctl %g0
lsri %g0, 1
pfx %hi(STATUS_INIT)
or %g0, %lo(STATUS_INIT)
wrctl %g0 /* update status */
nop
/*
* STACK
*/
pfx %hi(CONFIG_SYS_INIT_SP)
movi %sp, %lo(CONFIG_SYS_INIT_SP)
pfx %xhi(CONFIG_SYS_INIT_SP)
movhi %sp, %xlo(CONFIG_SYS_INIT_SP)
mov %fp, %sp
pfx %hi(4*16)
subi %sp, %lo(4*16) /* Space for reg window mgmt */
/*
* RELOCATE -- %g7 has return addr from bsr at _start.
*/
pfx %hi(__u_boot_cmd_end)
movi %g5, %lo(__u_boot_cmd_end)
pfx %xhi(__u_boot_cmd_end)
movhi %g5, %xlo(__u_boot_cmd_end) /* %g5 <- end address */
lsli %g7, 1 /* mem = retaddr << 1 */
mov %g6, %g7
subi %g6, 4 /* %g6 <- src addr */
ld %g7, [%g7] /* %g7 <- dst addr */
/* No need to move text sections if we're already located
* at the proper address.
*/
cmp %g7, %g6
ifs cc_z
br reloc
nop /* delay slot */
1: cmp %g7, %g5
skps cc_nz
br 2f
nop /* delay slot */
ld %g0, [%g6]
addi %g6, 4 /* src++ */
st [%g7], %g0
addi %g7, 4 /* dst++ */
br 1b
nop /* delay slot */
2:
/*
* Jump to relocation address
*/
pfx %hi(reloc@h)
movi %g0, %lo(reloc@h)
pfx %xhi(reloc@h)
movhi %g0, %xlo(reloc@h)
jmp %g0
nop /* delay slot */
reloc:
/*
* CLEAR BSS
*/
pfx %hi(__bss_end)
movi %g5, %lo(__bss_end)
pfx %xhi(__bss_end)
movhi %g5, %xlo(__bss_end) /* %g5 <- end address */
pfx %hi(__bss_start)
movi %g7, %lo(__bss_start)
pfx %xhi(__bss_start)
movhi %g7, %xlo(__bss_start) /* %g7 <- end address */
movi %g0, 0
3: cmp %g7, %g5
skps cc_nz
br 4f
nop /* delay slot */
st [%g7], %g0
addi %g7, 4 /* (delay slot) dst++ */
br 3b
nop /* delay slot */
4:
/*
* INIT VECTOR TABLE
*/
pfx %hi(CONFIG_SYS_VECT_BASE)
movi %g0, %lo(CONFIG_SYS_VECT_BASE)
pfx %xhi(CONFIG_SYS_VECT_BASE)
movhi %g0, %xlo(CONFIG_SYS_VECT_BASE) /* dst */
mov %l0, %g0
pfx %hi(_vectors)
movi %g1, %lo(_vectors)
pfx %xhi(_vectors)
movhi %g1, %xlo(_vectors) /* src */
bgen %g2, 6 /* cnt = 64 */
ldp %g3, [%l0, 3] /* bkpt vector */
ldp %g4, [%l0, 4] /* single step vector */
5: ld %g7, [%g1]
addi %g1, 4 /* src++ */
st [%g0], %g7
addi %g0, 4 /* dst++ */
subi %g2, 1 /* cnt-- */
ifrnz %g2
br 5b
nop /* delay slot */
#if defined(CONFIG_ROM_STUBS)
/* Restore the breakpoint and single step exception
* vectors to their original values.
*/
stp [%l0,3], %g3 /* breakpoint */
stp [%l0,4], %g4 /* single step */
#endif
/* For debug startup convenience ... software breakpoints
* set prior to this point may not succeed ;-)
*/
.global __start
__start:
/*
* Call board_init -- never returns
*/
pfx %hi(board_init@h)
movi %g1, %lo(board_init@h)
pfx %xhi(board_init@h)
movhi %g1, %xlo(board_init@h)
call %g1
nop /* Delaly slot */
/* NEVER RETURNS */
/*
* dly_clks -- Nios doesn't have a time/clk reference for simple
* delay loops, so we do our best by counting instruction cycles.
* A control register that counts system clock cycles would be
* a handy feature -- hint for Altera ;-)
*/
.globl dly_clks
/* Each loop is 4 instructions as delay slot is always
* executed. Each instruction is approximately 4 clocks
* (according to some lame info from Altera). So ...
* ... each loop is about 16 clocks.
*/
dly_clks:
lsri %o0, 4 /* cnt/16 */
8: skprnz %o0
br 9f
subi %o0, 1 /* cnt--, Delay slot */
br 8b
nop
9: lret
nop /* Delay slot */
.data
.globl version_string
version_string:
.ascii U_BOOT_VERSION
.ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
.ascii CONFIG_IDENT_STRING, "\0"

582
arch/nios/cpu/traps.S
View File

@ -1,582 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
/*************************************************************************
* Register window underflow
*
* The register window underflow exception occurs whenever the lowest
* valid register window is in use (CWP=LO_LIMIT) and a save instruction
* is issued. The save moves CWP below LO_LIMIT, %sp is set as normal,
* then the exception is generated prior to executing the instruction
* after the save.
************************************************************************/
.text
.global _cwp_lolimit
.align 4
_cwp_lolimit:
/* Sixteen words are always allocated by the compiler in every
* procedure's stack frame, always starting at %sp, for saving
* 'in' and 'local' registers on a window overflow.
*
* Save the 'global' and 'in' regs on stack. They are restored
* at cwp = HI_LIMIT. The 'local' regs aren't in-use at this point.
*/
sts [%sp,0], %g0 /* Save 'global' regs*/
sts [%sp,1], %g1
sts [%sp,2], %g2
sts [%sp,3], %g3
sts [%sp,4], %g4
sts [%sp,5], %g5
sts [%sp,6], %g6
sts [%sp,7], %g7
sts [%sp,8], %i0 /* Save 'in' regs */
sts [%sp,9], %i1
sts [%sp,10], %i2
sts [%sp,11], %i3
sts [%sp,12], %i4
sts [%sp,13], %i5
sts [%sp,14], %i6
sts [%sp,15], %i7
/* Save current %sp and return address in a global so they are
* available at cwp = HI_LIMIT ... where the 'global'/'in' regs
* are restored. NOTE: %sp changes with cwp.
*/
mov %g7, %o7
mov %g6, %sp
/* Get LO_LIMIT/HI_LIMIT to know where to start & stop. Note: in
* the underflow exception, cwp is __NOT__ guaranteed to be zero.
* If the OCI debug module is enabled the reset value for LO_LIMIT
* is 2, not 1 -- so cwp can be 1 or 0.
*/
pfx 2 /* WVALID */
rdctl %g1
mov %g2, %g1
pfx 0
and %g1, 0x1f /* g1 <- LO_LIMIT */
lsri %g2, 5
pfx 0
and %g2,0x1f /* g2 <- HI_LIMIT */
/* Set istatus so cwp = HI_LIMIT after tret
*/
movi %g5, 0x1f
lsli %g5, 4
not %g5 /* mask to clr cwp */
pfx 1 /* istatus */
rdctl %g0
and %g0, %g5 /* clear cwp field */
mov %g4, %g2
lsli %g4, 4
or %g0, %g4 /* cwp = HI_LIMIT */
pfx 1
wrctl %g0 /* update istatus */
/* Now move up the register file, saving as we go. When loop
* is first entered, %g1 is at LO_LIMIT.
*/
0:
restore /* cwp++ */
sts [%sp,0], %l0 /* Save "local" regs*/
sts [%sp,1], %l1
sts [%sp,2], %l2
sts [%sp,3], %l3
sts [%sp,4], %l4
sts [%sp,5], %l5
sts [%sp,6], %l6
sts [%sp,7], %l7
sts [%sp,8], %i0 /* Save 'in' regs */
sts [%sp,9], %i1
sts [%sp,10], %i2
sts [%sp,11], %i3
sts [%sp,12], %i4
sts [%sp,13], %i5
sts [%sp,14], %i6
sts [%sp,15], %i7
cmp %g1, %g2 /* cwp == HI_LIMIT ? */
skps cc_ne /* if so, we're done */
br 1f
nop /* delay slot */
inc %g1 /* g1 <- cwp++ */
br 0b
nop /* delay slot */
/* At this point cwp = HI_LIMIT, so the global/in regs that were
* in place when the underflow occurred must be restored using
* the original stack pointer (saved in g6).
*/
1:
mov %o7, %g7 /* restore return addr */
mov %sp, %g6 /* Restore original sp */
lds %g0, [%sp,0] /* Restore 'global' regs*/
lds %g1, [%sp,1]
lds %g2, [%sp,2]
lds %g3, [%sp,3]
lds %g4, [%sp,4]
lds %g5, [%sp,5]
lds %g6, [%sp,6]
lds %g7, [%sp,7]
lds %i0, [%sp,8] /* Restore 'in' regs*/
lds %i1, [%sp,9]
lds %i2, [%sp,10]
lds %i3, [%sp,11]
lds %i4, [%sp,12]
lds %i5, [%sp,13]
lds %i6, [%sp,14]
lds %i7, [%sp,15]
tret %o7 /* All done */
/*************************************************************************
* Register window overflow
*
* The register window overflow exception occurs whenever the highest
* valid register window is in use (cwp = HI_LIMIT) and a restore
* instruction is issued. Control is transferred to the overflow handler
* before the instruction following restore is executed.
*
* When a register window overflow exception is taken, the exception
* handler sees cwp at HI_LIMIT.
************************************************************************/
.text
.global _cwp_hilimit
.align 4
_cwp_hilimit:
/* Save 'global'/'in' regs on the stack -- will restore when cwp
* is at LO_LIMIT. Locals don't need saving as they are going away.
*/
sts [%sp,0], %g0 /* Save "global" regs*/
sts [%sp,1], %g1
sts [%sp,2], %g2
sts [%sp,3], %g3
sts [%sp,4], %g4
sts [%sp,5], %g5
sts [%sp,6], %g6
sts [%sp,7], %g7
sts [%sp,8], %i0 /* Save 'in' regs */
sts [%sp,9], %i1
sts [%sp,10], %i2
sts [%sp,11], %i3
sts [%sp,12], %i4
sts [%sp,13], %i5
sts [%sp,14], %i6
sts [%sp,15], %i7
/* The current %sp must be available in global to restore regs
* saved on stack. Need return addr as well ;-)
*/
mov %g7, %o7
mov %g6, %sp
/* Get HI_LIMIT & LO_LIMIT
*/
pfx 2 /* WVALID */
rdctl %g1
mov %g2, %g1
pfx 0
and %g1, 0x1f /* g1 <- LO_LIMIT */
lsri %g2, 5
pfx 0
and %g2,0x1f /* g2 <- HI_LIMIT */
/* Set istatus so cwp = LO_LIMIT after tret
*/
movi %g5, 0x1f
lsli %g5, 4
not %g5 /* mask to clr cwp */
pfx 1 /* istatus */
rdctl %g0
and %g0, %g5 /* clear cwp field */
mov %g4, %g1 /* g4 <- LO_LIMIT */
lsli %g4, 4
or %g0, %g4 /* cwp = LO_LIMIT */
pfx 1
wrctl %g0 /* update istatus */
/* Move to cwp = LO_LIMIT-1 and restore 'in' regs.
*/
subi %g4,(1 << 4) /* g4 <- LO_LIMIT - 1 */
rdctl %g0
and %g0, %g5 /* clear cwp field */
or %g0, %g4 /* cwp = LO_LIMIT - 1 */
wrctl %g0 /* update status */
nop
mov %sp, %g6 /* Restore sp */
lds %i0, [%sp,8] /* Restore 'in' regs */
lds %i1, [%sp,9]
lds %i2, [%sp,10]
lds %i3, [%sp,11]
lds %i4, [%sp,12]
lds %i5, [%sp,13]
lds %i6, [%sp,14] /* sp in next window */
lds %i7, [%sp,15]
/* Starting at LO_LIMIT-1, move up the register file, restoring
* along the way.
*/
0:
restore /* cwp++ */
lds %l0, [%sp,0] /* Restore 'local' regs*/
lds %l1, [%sp,1]
lds %l2, [%sp,2]
lds %l3, [%sp,3]
lds %l4, [%sp,4]
lds %l5, [%sp,5]
lds %l6, [%sp,6]
lds %l7, [%sp,7]
lds %i0, [%sp,8] /* Restore 'in' regs */
lds %i1, [%sp,9]
lds %i2, [%sp,10]
lds %i3, [%sp,11]
lds %i4, [%sp,12]
lds %i5, [%sp,13]
lds %i6, [%sp,14] /* sp in next window */
lds %i7, [%sp,15]
cmp %g1, %g2 /* cwp == HI_LIMIT ? */
skps cc_ne /* if so, we're done */
br 1f
nop /* delay slot */
inc %g1 /* cwp++ */
br 0b
nop /* delay slot */
/* All windows have been updated at this point, but the globals
* still need to be restored. Go to cwp = LO_LIMIT-1 to get
* some registers to use.
*/
1:
rdctl %g0
and %g0, %g5 /* clear cwp field */
or %g0, %g4 /* cwp = LO_LIMIT - 1 */
wrctl %g0 /* update status */
nop
/* Now there are some registers available to use in restoring
* the globals.
*/
mov %sp, %g6
mov %o7, %g7
lds %g0, [%sp,0] /* Restore "global" regs*/
lds %g1, [%sp,1]
lds %g2, [%sp,2]
lds %g3, [%sp,3]
lds %g4, [%sp,4]
lds %g5, [%sp,5]
lds %g6, [%sp,6]
lds %g7, [%sp,7]
/* The tret moves istatus -> status. istatus was already set for
* cwp = LO_LIMIT.
*/
tret %o7 /* done */
/*************************************************************************
* Default exception handler
*
* The default handler passes control to external_interrupt(). So trap
* or hardware interrupt hanlders can be installed using the familiar
* irq_install_handler().
*
* Here, the stack is fixed-up and cwp is incremented prior to calling
* external_interrupt(). This lets the underflow and overflow handlers
* operate normally during the exception.
************************************************************************/
.text
.global _def_xhandler
.align 4
_def_xhandler:
/* Allocate some stack space: 16 words at %sp to accomodate
* a reg window underflow, 8 words to save interrupted task's
* 'out' regs (which are now the 'in' regs), 8 words to preserve
* the 'global' regs and 3 words to save the return address,
* status and istatus. istatus must be saved in the event an
* underflow occurs in a dispatched handler. status is saved so
* a handler can access it on stack.
*/
pfx %hi((16+16+3) * 4)
subi %fp, %lo((16+16+3) * 4)
mov %sp, %fp
/* Save the 'global' regs and the interrupted task's 'out' regs
* (our 'in' regs) along with the return addr, status & istatus.
* First 16 words are for underflow exception.
*/
rdctl %l0 /* status */
pfx 1 /* istatus */
rdctl %l1
sts [%sp,16+0], %g0 /* Save 'global' regs*/
sts [%sp,16+1], %g1
sts [%sp,16+2], %g2
sts [%sp,16+3], %g3
sts [%sp,16+4], %g4
sts [%sp,16+5], %g5
sts [%sp,16+6], %g6
sts [%sp,16+7], %g7
sts [%sp,16+8], %i0 /* Save 'in' regs */
sts [%sp,16+9], %i1
sts [%sp,16+10], %i2
sts [%sp,16+11], %i3
sts [%sp,16+12], %i4
sts [%sp,16+13], %i5
sts [%sp,16+14], %i6
sts [%sp,16+15], %i7
sts [%sp,16+16], %l0 /* status */
sts [%sp,16+17], %l1 /* istatus */
sts [%sp,16+18], %o7 /* return addr */
/* Move to cwp+1 ... this guarantees cwp is at or above LO_LIMIT.
* Need to set IPRI=3 and IE=1 to enable underflow exceptions.
* NOTE: only the 'out' regs have been saved ... can't touch
* the 'in' or 'local' here.
*/
restore /* cwp++ */
rdctl %o0 /* o0 <- status */
pfx %hi(0x7e00)
movi %o1, %lo(0x7e00)
not %o1
and %o0, %o1 /* clear IPRI */
pfx %hi(0x8600)
movi %o1, %lo(0x8600)
or %o0, %o1 /* IPRI=3, IE=1 */
wrctl %o0 /* o0 -> status */
nop
/* It's ok to call a C routine now since cwp >= LO_LIMIT,
* interrupt task's registers are/will be preserved, and
* underflow exceptions can be handled.
*/
pfx %hi(external_interrupt@h)
movi %o1, %lo(external_interrupt@h)
pfx %xhi(external_interrupt@h)
movhi %o1, %xlo(external_interrupt@h)
bgen %o0, 4+2 /* 16 * 4 */
add %o0, %sp /* Ptr to regs */
call %o1
nop
/* Move back to the exception register window, restore the 'out'
* registers, then return from exception.
*/
rdctl %o0 /* o0 <- status */
subi %o0, 16
wrctl %o0 /* cwp-- */
nop
mov %sp, %fp
lds %g0, [%sp,16+0] /* Restore 'global' regs*/
lds %g1, [%sp,16+1]
lds %g2, [%sp,16+2]
lds %g3, [%sp,16+3]
lds %g4, [%sp,16+4]
lds %g5, [%sp,16+5]
lds %g6, [%sp,16+6]
lds %g7, [%sp,16+7]
lds %i0, [%sp,16+8] /* Restore 'in' regs*/
lds %i1, [%sp,16+9]
lds %i2, [%sp,16+10]
lds %i3, [%sp,16+11]
lds %i4, [%sp,16+12]
lds %i5, [%sp,16+13]
lds %i6, [%sp,16+14]
lds %i7, [%sp,16+15]
lds %l0, [%sp,16+16] /* status */
lds %l1, [%sp,16+17] /* istatus */
lds %o7, [%sp,16+18] /* return addr */
pfx 1
wrctl %l1 /* restore istatus */
pfx %hi((16+16+3) * 4)
addi %sp, %lo((16+16+3) * 4)
mov %fp, %sp
tret %o7 /* Done */
/*************************************************************************
* Timebase Timer Interrupt -- This has identical structure to above,
* but calls timer_interrupt(). Doing it this way keeps things similar
* to other architectures (e.g. ppc).
************************************************************************/
.text
.global _timebase_int
.align 4
_timebase_int:
/* Allocate stack space.
*/
pfx %hi((16+16+3) * 4)
subi %fp, %lo((16+16+3) * 4)
mov %sp, %fp
/* Save the 'global' regs & 'out' regs (our 'in' regs)
*/
rdctl %l0 /* status */
pfx 1 /* istatus */
rdctl %l1
sts [%sp,16+0], %g0 /* Save 'global' regs*/
sts [%sp,16+1], %g1
sts [%sp,16+2], %g2
sts [%sp,16+3], %g3
sts [%sp,16+4], %g4
sts [%sp,16+5], %g5
sts [%sp,16+6], %g6
sts [%sp,16+7], %g7
sts [%sp,16+8], %i0 /* Save 'in' regs */
sts [%sp,16+9], %i1
sts [%sp,16+10], %i2
sts [%sp,16+11], %i3
sts [%sp,16+12], %i4
sts [%sp,16+13], %i5
sts [%sp,16+14], %i6
sts [%sp,16+15], %i7
sts [%sp,16+16], %l0 /* status */
sts [%sp,16+17], %l1 /* istatus */
sts [%sp,16+18], %o7 /* return addr */
/* Move to cwp+1.
*/
restore /* cwp++ */
rdctl %o0 /* o0 <- status */
pfx %hi(0x7e00)
movi %o1, %lo(0x7e00)
not %o1
and %o0, %o1 /* clear IPRI */
pfx %hi(0x8600)
movi %o1, %lo(0x8600)
or %o0, %o1 /* IPRI=3, IE=1 */
wrctl %o0 /* o0 -> status */
nop
/* Call timer_interrupt()
*/
pfx %hi(timer_interrupt@h)
movi %o1, %lo(timer_interrupt@h)
pfx %xhi(timer_interrupt@h)
movhi %o1, %xlo(timer_interrupt@h)
bgen %o0, 4+2 /* 16 * 4 */
add %o0, %sp /* Ptr to regs */
call %o1
nop
/* Move back to the exception register window, restore the 'out'
* registers, then return from exception.
*/
rdctl %o0 /* o0 <- status */
subi %o0, 16
wrctl %o0 /* cwp-- */
nop
mov %sp, %fp
lds %g0, [%sp,16+0] /* Restore 'global' regs*/
lds %g1, [%sp,16+1]
lds %g2, [%sp,16+2]
lds %g3, [%sp,16+3]
lds %g4, [%sp,16+4]
lds %g5, [%sp,16+5]
lds %g6, [%sp,16+6]
lds %g7, [%sp,16+7]
lds %i0, [%sp,16+8] /* Restore 'in' regs*/
lds %i1, [%sp,16+9]
lds %i2, [%sp,16+10]
lds %i3, [%sp,16+11]
lds %i4, [%sp,16+12]
lds %i5, [%sp,16+13]
lds %i6, [%sp,16+14]
lds %i7, [%sp,16+15]
lds %l0, [%sp,16+16] /* status */
lds %l1, [%sp,16+17] /* istatus */
lds %o7, [%sp,16+18] /* return addr */
pfx 1
wrctl %l1 /* restore istatus */
pfx %hi((16+16+3) * 4)
addi %sp, %lo((16+16+3) * 4)
mov %fp, %sp
tret %o7 /* Done */
/*************************************************************************
* GDB stubs
************************************************************************/
.text
.global _brkpt_hw_int, _brkpt_sw_int
.align 4
_brkpt_hw_int:
movi %l1, 9
pfx 3
wrctl %l1
pfx 4
wrctl %l1
_brkpt_sw_int:
movi %l1, 9
pfx 3
wrctl %l1
pfx 4
wrctl %l1
tret %o7

38
arch/nios/include/asm/bitops.h
View File

@ -1,38 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ASM_NIOS_BITOPS_H_
#define _ASM_NIOS_BITOPS_H_
extern void set_bit(int nr, volatile void * a);
extern void clear_bit(int nr, volatile void * a);
extern int test_and_clear_bit(int nr, volatile void * a);
extern void change_bit(unsigned long nr, volatile void *addr);
extern int test_and_set_bit(int nr, volatile void * a);
extern int test_and_change_bit(int nr, volatile void * addr);
extern int test_bit(int nr, volatile void * a);
extern int ffs(int i);
#define PLATFORM_FFS
#endif /* _ASM_NIOS_BITOPS_H */

30
arch/nios/include/asm/byteorder.h
View File

@ -1,30 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_NIOS_BYTEORDER_H
#define __ASM_NIOS_BYTEORDER_H
#include <asm/types.h>
#include <linux/byteorder/little_endian.h>
#endif

1
arch/nios/include/asm/cache.h
View File

@ -1 +0,0 @@
/*FIXME: Implement this! */

27
arch/nios/include/asm/config.h
View File

@ -1,27 +0,0 @@
/*
* Copyright 2009 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
/* Relocation to SDRAM works on all NIOS boards */
#define CONFIG_RELOC_FIXUP_WORKS
#endif

54
arch/nios/include/asm/global_data.h
View File

@ -1,54 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_NIOS_GLOBALDATA_H
#define __ASM_NIOS_GLOBALDATA_H
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long have_console; /* serial_init() was called */
phys_size_t ram_size; /* RAM size */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid */
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
unsigned long post_log_word; /* Record POST activities */
unsigned long post_init_f_time; /* When post_init_f started */
#endif
void **jt; /* Standalone app jump table */
} gd_t;
/* flags */
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("%g7")
#endif /* __ASM_NIOS_GLOBALDATA_H */

141
arch/nios/include/asm/io.h
View File

@ -1,141 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_NIOS_IO_H_
#define __ASM_NIOS_IO_H_
#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
#define __raw_readb(a) (*(volatile unsigned char *)(a))
#define __raw_readw(a) (*(volatile unsigned short *)(a))
#define __raw_readl(a) (*(volatile unsigned int *)(a))
#define readb(addr)\
({unsigned char val;\
asm volatile( " pfxio 0 \n"\
" ld %0, [%1] \n"\
" ext8d %0, %1 \n"\
:"=r"(val) : "r" (addr)); val;})
#define readw(addr)\
({unsigned short val;\
asm volatile( " pfxio 0 \n"\
" ld %0, [%1] \n"\
" ext16d %0, %1 \n"\
:"=r"(val) : "r" (addr)); val;})
#define readl(addr)\
({unsigned long val;\
asm volatile( " pfxio 0 \n"\
" ld %0, [%1] \n"\
:"=r"(val) : "r" (addr)); val;})
#define writeb(addr,val)\
asm volatile ( " fill8 %%r0, %1 \n"\
" st8d [%0], %%r0 \n"\
: : "r" (addr), "r" (val) : "r0")
#define writew(addr,val)\
asm volatile ( " fill16 %%r0, %1 \n"\
" st16d [%0], %%r0 \n"\
: : "r" (addr), "r" (val) : "r0")
#define writel(addr,val)\
asm volatile ( " st [%0], %1 \n"\
: : "r" (addr), "r" (val))
#define inb(addr) readb(addr)
#define inw(addr) readw(addr)
#define inl(addr) readl(addr)
#define outb(val,addr) writeb(addr,val)
#define outw(val,addr) writew(addr,val)
#define outl(val,addr) writel(addr,val)
static inline void insb (unsigned long port, void *dst, unsigned long count)
{
unsigned char *p = dst;
while (count--) *p++ = inb (port);
}
static inline void insw (unsigned long port, void *dst, unsigned long count)
{
unsigned short *p = dst;
while (count--) *p++ = inw (port);
}
static inline void insl (unsigned long port, void *dst, unsigned long count)
{
unsigned long *p = dst;
while (count--) *p++ = inl (port);
}
static inline void outsb (unsigned long port, const void *src, unsigned long count)
{
const unsigned char *p = src;
while (count--) outb (*p++, port);
}
static inline void outsw (unsigned long port, const void *src, unsigned long count)
{
const unsigned short *p = src;
while (count--) outw (*p++, port);
}
static inline void outsl (unsigned long port, const void *src, unsigned long count)
{
const unsigned long *p = src;
while (count--) outl (*p++, port);
}
static inline void sync(void)
{
}
/*
* Given a physical address and a length, return a virtual address
* that can be used to access the memory range with the caching
* properties specified by "flags".
*/
#define MAP_NOCACHE (0)
#define MAP_WRCOMBINE (0)
#define MAP_WRBACK (0)
#define MAP_WRTHROUGH (0)
static inline void *
map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
{
return (void *)paddr;
}
/*
* Take down a mapping set up by map_physmem().
*/
static inline void unmap_physmem(void *vaddr, unsigned long flags)
{
}
static inline phys_addr_t virt_to_phys(void * vaddr)
{
return (phys_addr_t)(vaddr);
}
#endif /* __ASM_NIOS_IO_H_ */

63
arch/nios/include/asm/posix_types.h
View File

@ -1,63 +0,0 @@
#ifndef __ASM_NIOS_POSIX_TYPES_H
#define __ASM_NIOS_POSIX_TYPES_H
/*
* This file is generally used by user-level software, so you need to
* be a little careful about namespace pollution etc. Also, we cannot
* assume GCC is being used.
*/
typedef unsigned short __kernel_dev_t;
typedef unsigned long __kernel_ino_t;
typedef unsigned short __kernel_mode_t;
typedef unsigned short __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
typedef unsigned short __kernel_ipc_pid_t;
typedef unsigned short __kernel_uid_t;
typedef unsigned short __kernel_gid_t;
typedef unsigned long __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
typedef long __kernel_time_t;
typedef long __kernel_suseconds_t;
typedef long __kernel_clock_t;
typedef int __kernel_daddr_t;
typedef char * __kernel_caddr_t;
typedef unsigned short __kernel_uid16_t;
typedef unsigned short __kernel_gid16_t;
typedef unsigned int __kernel_uid32_t;
typedef unsigned int __kernel_gid32_t;
typedef unsigned short __kernel_old_uid_t;
typedef unsigned short __kernel_old_gid_t;
#ifdef __GNUC__
typedef long long __kernel_loff_t;
#endif
typedef struct {
#if defined(__KERNEL__) || defined(__USE_ALL)
int val[2];
#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
int __val[2];
#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
} __kernel_fsid_t;
#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
#undef __FD_SET
#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
#undef __FD_CLR
#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
#undef __FD_ISSET
#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
#undef __FD_ZERO
#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
#endif

1
arch/nios/include/asm/processor.h
View File

@ -1 +0,0 @@
/* FIXME: Implement this! */

28
arch/nios/include/asm/psr.h
View File

@ -1,28 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _NIOS_PSR_H
#define _NIOS_PSR_H
#endif /* _NIOS_PSR_H */

36
arch/nios/include/asm/ptrace.h
View File

@ -1,36 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _NIOS_PTRACE_H
#define _NIOS_PTRACE_H
struct pt_regs {
unsigned global[8];
unsigned in[8];
unsigned status;
unsigned istatus;
unsigned retaddr;
};
#endif /* _NIOS_PTRACE_H */

132
arch/nios/include/asm/status_led.h
View File

@ -1,132 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* asm-nios/status_led.h
*
* NIOS PIO based status led support functions
*/
#ifndef __ASM_STATUS_LED_H__
#define __ASM_STATUS_LED_H__
#include <nios-io.h>
/* led_id_t is unsigned int mask */
typedef unsigned int led_id_t;
#ifdef STATUS_LED_WRONLY /* emulate read access */
static led_id_t __led_portval = 0;
#endif
static inline void __led_init (led_id_t mask, int state)
{
nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
#ifdef STATUS_LED_WRONLY /* emulate read access */
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
__led_portval &= ~mask;
else
__led_portval |= mask;
#else
if (state == STATUS_LED_ON)
__led_portval |= mask;
else
__led_portval &= ~mask;
#endif
piop->data = __led_portval;
#else /* !STATUS_LED_WRONLY */
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
piop->data &= ~mask;
else
piop->data |= mask;
#else
if (state == STATUS_LED_ON)
piop->data |= mask;
else
piop->data &= ~mask;
#endif
piop->direction |= mask;
#endif /* STATUS_LED_WRONLY */
}
static inline void __led_toggle (led_id_t mask)
{
nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
#ifdef STATUS_LED_WRONLY /* emulate read access */
__led_portval ^= mask;
piop->data = __led_portval;
#else /* !STATUS_LED_WRONLY */
piop->data ^= mask;
#endif /* STATUS_LED_WRONLY */
}
static inline void __led_set (led_id_t mask, int state)
{
nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
#ifdef STATUS_LED_WRONLY /* emulate read access */
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
__led_portval &= ~mask;
else
__led_portval |= mask;
#else
if (state == STATUS_LED_ON)
__led_portval |= mask;
else
__led_portval &= ~mask;
#endif
piop->data = __led_portval;
#else /* !STATUS_LED_WRONLY */
#if (STATUS_LED_ACTIVE == 0)
if (state == STATUS_LED_ON)
piop->data &= ~mask;
else
piop->data |= mask;
#else
if (state == STATUS_LED_ON)
piop->data |= mask;
else
piop->data &= ~mask;
#endif
#endif /* STATUS_LED_WRONLY */
}
#endif /* __ASM_STATUS_LED_H__ */

25
arch/nios/include/asm/string.h
View File

@ -1,25 +0,0 @@
#ifndef __ASM_NIOS_STRING_H
#define __ASM_NIOS_STRING_H
#undef __HAVE_ARCH_STRRCHR
extern char * strrchr(const char * s, int c);
#undef __HAVE_ARCH_STRCHR
extern char * strchr(const char * s, int c);
#undef __HAVE_ARCH_MEMCPY
extern void * memcpy(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMMOVE
extern void * memmove(void *, const void *, __kernel_size_t);
#undef __HAVE_ARCH_MEMCHR
extern void * memchr(const void *, int, __kernel_size_t);
#undef __HAVE_ARCH_MEMSET
extern void * memset(void *, int, __kernel_size_t);
#undef __HAVE_ARCH_MEMZERO
extern void memzero(void *ptr, __kernel_size_t n);
#endif

4
arch/nios/include/asm/system.h
View File

@ -1,4 +0,0 @@
#ifndef _ASM_NIOS_SYSTEM_H_
#define _ASM_NIOS_SYSTEM_H_
#endif /* _ASM_NIOS_SYSTEM_H */

60
arch/nios/include/asm/types.h
View File

@ -1,60 +0,0 @@
#ifndef _NIOS_TYPES_H
#define _NIOS_TYPES_H
/*
* This file is never included by application software unless
* explicitly requested (e.g., via linux/types.h) in which case the
* application is Linux specific so (user-) name space pollution is
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
typedef unsigned short umode_t;
/*
* __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
* header files exported to user space
*/
typedef __signed__ char __s8;
typedef unsigned char __u8;
typedef __signed__ short __s16;
typedef unsigned short __u16;
typedef __signed__ int __s32;
typedef unsigned int __u32;
#if defined(__GNUC__)
__extension__ typedef __signed__ long long __s64;
__extension__ typedef unsigned long long __u64;
#endif
/*
* These aren't exported outside the kernel to avoid name space clashes
*/
#ifdef __KERNEL__
typedef signed char s8;
typedef unsigned char u8;
typedef signed short s16;
typedef unsigned short u16;
typedef signed int s32;
typedef unsigned int u32;
typedef signed long long s64;
typedef unsigned long long u64;
#define BITS_PER_LONG 32
/* Dma addresses are 32-bits wide. */
typedef u32 dma_addr_t;
typedef unsigned long phys_addr_t;
typedef unsigned long phys_size_t;
#endif /* __KERNEL__ */
#endif /* _NIOS_TYPES_H */

48
arch/nios/include/asm/u-boot.h
View File

@ -1,48 +0,0 @@
/*
* (C) Copyright 2003
* Psyent Corporation
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************
* NOTE: This header file defines an interface to U-Boot. Including
* this (unmodified) header file in another file is considered normal
* use of U-Boot, and does *not* fall under the heading of "derived
* work".
********************************************************************
*/
#ifndef _U_BOOT_H_
#define _U_BOOT_H_
typedef struct bd_info {
unsigned long bi_memstart; /* start of DRAM memory */
phys_size_t bi_memsize; /* size of DRAM memory in bytes */
unsigned long bi_flashstart; /* start of FLASH memory */
unsigned long bi_flashsize; /* size of FLASH memory */
unsigned long bi_flashoffset; /* reserved area for startup monitor */
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_ip_addr; /* IP Address */
unsigned long bi_baudrate; /* Console Baudrate */
} bd_t;
#endif /* _U_BOOT_H_ */

50
arch/nios/lib/Makefile
View File

@ -1,50 +0,0 @@
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(ARCH).a
SOBJS-y +=
COBJS-y += board.o
COBJS-y += bootm.o
COBJS-y += cache.o
COBJS-y += divmod.o
COBJS-y += mult.o
COBJS-y += time.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
$(LIB): $(obj).depend $(OBJS)
$(AR) $(ARFLAGS) $@ $(OBJS)
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

168
arch/nios/lib/board.c
View File

@ -1,168 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <stdio_dev.h>
#include <watchdog.h>
#include <malloc.h>
#include <net.h>
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* All attempts to come up with a "common" initialization sequence
* that works for all boards and architectures failed: some of the
* requirements are just _too_ different. To get rid of the resulting
* mess of board dependend #ifdef'ed code we now make the whole
* initialization sequence configurable to the user.
*
* The requirements for any new initalization function is simple: it
* receives a pointer to the "global data" structure as it's only
* argument, and returns an integer return code, where 0 means
* "continue" and != 0 means "fatal error, hang the system".
*/
typedef int (init_fnc_t) (void);
/************************************************************************
* Initialization sequence *
***********************************************************************/
init_fnc_t *init_sequence[] = {
#if defined(CONFIG_BOARD_EARLY_INIT_F)
board_early_init_f, /* Call board-specific init code early.*/
#endif
env_init,
serial_init,
console_init_f,
display_options,
checkcpu,
checkboard,
NULL, /* Terminate this list */
};
/***********************************************************************/
void board_init (void)
{
bd_t *bd;
init_fnc_t **init_fnc_ptr;
char *s, *e;
int i;
/* Pointer is writable since we allocated a register for it.
* Nios treats CONFIG_SYS_GBL_DATA_OFFSET as an address.
*/
gd = (gd_t *)CONFIG_SYS_GBL_DATA_OFFSET;
/* compiler optimization barrier needed for GCC >= 3.4 */
__asm__ __volatile__("": : :"memory");
memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
gd->bd = (bd_t *)(gd+1); /* At end of global data */
gd->baudrate = CONFIG_BAUDRATE;
gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
bd = gd->bd;
bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
#if defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
bd->bi_sramstart= CONFIG_SYS_SRAM_BASE;
bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
#endif
bd->bi_baudrate = CONFIG_BAUDRATE;
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
WATCHDOG_RESET ();
if ((*init_fnc_ptr) () != 0) {
hang ();
}
}
WATCHDOG_RESET ();
/* The Malloc area is immediately below the monitor copy in RAM */
mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
WATCHDOG_RESET ();
bd->bi_flashsize = flash_init();
WATCHDOG_RESET ();
env_relocate();
bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
WATCHDOG_RESET ();
stdio_init();
jumptable_init();
console_init_r();
/*
*/
WATCHDOG_RESET ();
interrupt_init ();
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
/* main_loop */
for (;;) {
WATCHDOG_RESET ();
main_loop ();
}
}
/***********************************************************************/
void hang (void)
{
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
#endif
puts("### ERROR ### Please reset board ###\n");
for (;;);
}
unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
{
/*
* x86 does not use a dedicated register to pass the pointer
* to the global_data
*/
argv[-1] = (char *)gd;
return entry (argc, argv);
}

34
arch/nios/lib/bootm.c
View File

@ -1,34 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
/* FIXME: Once we find a stable version of uC-linux for nios
* we can get this working. ;-)
*
*/
int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
{
return 1;
}

32
arch/nios/lib/cache.c
View File

@ -1,32 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
void flush_cache (ulong addr, ulong size)
{
/* Nios cache is write-thru -- nothing to do here.
*/
return;
}

101
arch/nios/lib/divmod.c
View File

@ -1,101 +0,0 @@
/*
* This file is part of GNU CC.
*
* GNU CC is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published
* by the Free Software Foundation; either version 2, or (at your
* option) any later version.
*
* GNU CC is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with GNU CC; see the file COPYING. If not, write
* to the Free Software Foundation, 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
#include "math.h"
USItype udivmodsi4 (USItype num, USItype den, word_type modwanted)
{
USItype bit = 1;
USItype res = 0;
while (den < num && bit && !(den & (1L << 31))) {
den <<= 1;
bit <<= 1;
}
while (bit) {
if (num >= den) {
num -= den;
res |= bit;
}
bit >>= 1;
den >>= 1;
}
if (modwanted)
return num;
return res;
}
SItype __divsi3 (SItype a, SItype b)
{
word_type neg = 0;
SItype res;
if (a < 0) {
a = -a;
neg = !neg;
}
if (b < 0) {
b = -b;
neg = !neg;
}
res = udivmodsi4 (a, b, 0);
if (neg)
res = -res;
return res;
}
SItype __modsi3 (SItype a, SItype b)
{
word_type neg = 0;
SItype res;
if (a < 0) {
a = -a;
neg = 1;
}
if (b < 0)
b = -b;
res = udivmodsi4 (a, b, 1);
if (neg)
res = -res;
return res;
}
SItype __udivsi3 (SItype a, SItype b)
{
return udivmodsi4 (a, b, 0);
}
SItype __umodsi3 (SItype a, SItype b)
{
return udivmodsi4 (a, b, 1);
}

16
arch/nios/lib/math.h
View File

@ -1,16 +0,0 @@
#define BITS_PER_UNIT 8
typedef int HItype __attribute__ ((mode (HI)));
typedef unsigned int UHItype __attribute__ ((mode (HI)));
typedef int SItype __attribute__ ((mode (SI)));
typedef unsigned int USItype __attribute__ ((mode (SI)));
typedef int word_type __attribute__ ((mode (__word__)));
struct SIstruct {HItype low, high;};
typedef union {
struct SIstruct s;
SItype ll;
} SIunion;

56
arch/nios/lib/mult.c
View File

@ -1,56 +0,0 @@
/*
* This file is part of GNU CC.
*
* GNU CC is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published
* by the Free Software Foundation; either version 2, or (at your
* option) any later version.
*
* GNU CC is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with GNU CC; see the file COPYING. If not, write
* to the Free Software Foundation, 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
#include <common.h>
#if !defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP)
#include "math.h"
USItype __mulsi3 (USItype a, USItype b)
{
USItype c = 0;
while (a != 0) {
if (a & 1)
c += b;
a >>= 1;
b <<= 1;
}
return c;
}
UHItype __mulhi3 (UHItype a, UHItype b)
{
UHItype c = 0;
while (a != 0) {
if (a & 1)
c += b;
a >>= 1;
b <<= 1;
}
return c;
}
#endif /*!defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP) */

38
arch/nios/lib/time.c
View File

@ -1,38 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
extern void dly_clks( unsigned long ticks );
void __udelay(unsigned long usec)
{
/* The Nios core doesn't have a timebase, so we do our
* best for now and call a low-level loop that counts
* cpu clocks.
*/
unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec;
dly_clks (cnt);
}

51
board/altera/dk1c20/Makefile
View File

@ -1,51 +0,0 @@
#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

29
board/altera/dk1c20/config.mk
View File

@ -1,29 +0,0 @@
#
# (C) Copyright 2003
# Psyent Corporation
# Scott McNutt <smcnutt@psyent.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
TEXT_BASE = 0x018c0000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif

93
board/altera/dk1c20/dk1c20.c
View File

@ -1,93 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* CompactFlash/IDE:
* (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <nios-io.h>
#if defined(CONFIG_SEVENSEG)
#include "../common/sevenseg.h"
#endif
void _default_hdlr (void)
{
printf ("default_hdlr\n");
}
int board_early_init_f (void)
{
#if defined(CONFIG_SEVENSEG)
/* init seven segment led display and switch off */
sevenseg_set(SEVENSEG_OFF);
#endif
return 0;
}
int checkboard (void)
{
puts ("Board: Altera Nios 1C20 Development Kit\n");
return 0;
}
phys_size_t initdram (int board_type)
{
return (0);
}
#if defined(CONFIG_CMD_IDE)
int ide_preinit (void)
{
nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
/* setup data direction registers */
present->direction = NIOS_PIO_IN;
power->direction = NIOS_PIO_OUT;
atasel->direction = NIOS_PIO_OUT;
/* Check for presence of card */
if (present->data)
return 1;
printf ("Ok\n");
/* Finish setup */
power->data = 1; /* Turn on power FET */
atasel->data = 0; /* Put in ATA mode */
return 0;
}
#endif
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif

62
board/altera/dk1c20/flash.c
View File

@ -1,62 +0,0 @@
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nios.h>
/*
* include common flash code (for altera boards)
*/
#include "../common/flash.c"
/*----------------------------------------------------------------------*/
#define BANKSZ CONFIG_SYS_FLASH_SIZE
#define SECTSZ (64 * 1024)
#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
/*----------------------------------------------------------------------*/
unsigned long flash_init (void)
{
int i;
unsigned long addr;
flash_info_t *fli = &flash_info[0];
fli->size = BANKSZ;
fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
/* Protect all but 2 MByte user area */
if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
fli->protect[i] = 0;
else
fli->protect[i] = 1;
}
return (BANKSZ);
}

33
board/altera/dk1c20/misc.c
View File

@ -1,33 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* board/altera/dk1s10/misc.c
*
* miscellaneous board interfaces / drivers
*/
#include <common.h>
#if defined(CONFIG_SEVENSEG)
#include "../common/sevenseg.h"
#include "../common/sevenseg.c"
#endif

70
board/altera/dk1c20/u-boot.lds
View File

@ -1,70 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-nios")
OUTPUT_ARCH(nios)
ENTRY(_start)
SECTIONS
{
.text :
{
arch/nios/cpu/start.o (.text)
*(.text)
}
__text_end = .;
. = ALIGN(4);
.rodata :
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
__rodata_end = .;
. = ALIGN(4);
.data :
{
*(.data)
}
. = ALIGN(4);
__data_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd :
{
*(.u_boot_cmd)
}
. = ALIGN(4);
__u_boot_cmd_end = .;
__bss_start = .;
. = ALIGN(4);
.bss (NOLOAD) :
{
*(.bss)
}
. = ALIGN(4);
__bss_end = .;
}

123
board/altera/dk1c20/vectors.S
View File

@ -1,123 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*************************************************************************
* Exception Vector Table
*
* This could have gone in the cpu soure tree, but the whole point of
* Nios is customization -- and polluting the cpu source tree with
* board-specific ifdef's really defeats the purpose, no? With this in
* the board-specific tree, each board has the freedom to organize
* vectors/traps, etc anyway it wants. The init code copies this table
* to the proper location.
*
* Each board can do what it likes here. But there are four "standard"
* handlers availble:
*
* _cwp_lolimit -Handles register window underflows.
* _cwp_hilimit -Handles register window overflows.
* _timebase_int -Increments the timebase.
* _brkpt_hw_int -Hardware breakpoint handler.
* _brkpt_sw_int -Software breakpoint handler.
* _def_xhandler -Default exception handler.
*
* _timebase_int handles a Nios Timer interrupt and increments the
* timestamp used for the get_timer(), reset_timer(), etc. routines. It
* expects the timer to be configured like the standard-32 low priority
* timer.
*
* _def_xhandler dispatches exceptions/traps via the external_interrupt()
* routine. This lets you use the irq_install_handler() and handle your
* interrupts/traps with code written in C.
************************************************************************/
.data
.global _vectors
.align 4
_vectors:
.long _def_xhandler@h /* Vector 0 - NMI */
.long _cwp_lolimit@h /* Vector 1 - underflow */
.long _cwp_hilimit@h /* Vector 2 - overflow */
.long _brkpt_hw_int@h /* Vector 3 - Breakpoint */
.long _brkpt_sw_int@h /* Vector 4 - Single step*/
.long _def_xhandler@h /* Vector 5 - GNUPro debug */
.long _def_xhandler@h /* Vector 6 - future reserved */
.long _def_xhandler@h /* Vector 7 - future reserved */
.long _def_xhandler@h /* Vector 8 - future reserved */
.long _def_xhandler@h /* Vector 9 - future reserved */
.long _def_xhandler@h /* Vector 10 - future reserved */
.long _def_xhandler@h /* Vector 11 - future reserved */
.long _def_xhandler@h /* Vector 12 - future reserved */
.long _def_xhandler@h /* Vector 13 - future reserved */
.long _def_xhandler@h /* Vector 14 - future reserved */
.long _def_xhandler@h /* Vector 15 - future reserved */
.long _def_xhandler@h /* Vector 16 */
.long _def_xhandler@h /* Vector 17 */
.long _def_xhandler@h /* Vector 18 */
.long _def_xhandler@h /* Vector 19 */
.long _def_xhandler@h /* Vector 20 */
.long _def_xhandler@h /* Vector 21 */
.long _def_xhandler@h /* Vector 22 */
.long _def_xhandler@h /* Vector 23 */
.long _def_xhandler@h /* Vector 24 */
.long _def_xhandler@h /* Vector 25 */
.long _def_xhandler@h /* Vector 26 */
.long _def_xhandler@h /* Vector 27 */
.long _def_xhandler@h /* Vector 28 */
.long _def_xhandler@h /* Vector 29 */
.long _def_xhandler@h /* Vector 30 */
.long _def_xhandler@h /* Vector 31 */
.long _def_xhandler@h /* Vector 32 */
.long _def_xhandler@h /* Vector 33 */
.long _def_xhandler@h /* Vector 34 */
.long _def_xhandler@h /* Vector 35 */
.long _def_xhandler@h /* Vector 36 */
.long _def_xhandler@h /* Vector 37 */
.long _def_xhandler@h /* Vector 38 */
.long _def_xhandler@h /* Vector 39 */
.long _def_xhandler@h /* Vector 40 */
.long _def_xhandler@h /* Vector 41 */
.long _def_xhandler@h /* Vector 42 */
.long _def_xhandler@h /* Vector 43 */
.long _def_xhandler@h /* Vector 44 */
.long _def_xhandler@h /* Vector 45 */
.long _def_xhandler@h /* Vector 46 */
.long _def_xhandler@h /* Vector 47 */
.long _def_xhandler@h /* Vector 48 */
.long _def_xhandler@h /* Vector 49 */
.long _timebase_int@h /* Vector 50 - lopri timer*/
.long _def_xhandler@h /* Vector 51 */
.long _def_xhandler@h /* Vector 52 */
.long _def_xhandler@h /* Vector 53 */
.long _def_xhandler@h /* Vector 54 */
.long _def_xhandler@h /* Vector 55 */
.long _def_xhandler@h /* Vector 56 */
.long _def_xhandler@h /* Vector 57 */
.long _def_xhandler@h /* Vector 58 */
.long _def_xhandler@h /* Vector 59 */
.long _def_xhandler@h /* Vector 60 */
.long _def_xhandler@h /* Vector 61 */
.long _def_xhandler@h /* Vector 62 */
.long _def_xhandler@h /* Vector 63 */

51
board/altera/dk1s10/Makefile
View File

@ -1,51 +0,0 @@
#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o flash.o misc.o
SOBJS = vectors.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

29
board/altera/dk1s10/config.mk
View File

@ -1,29 +0,0 @@
#
# (C) Copyright 2003
# Psyent Corporation
# Scott McNutt <smcnutt@psyent.com>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
TEXT_BASE = 0x018c0000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif

72
board/altera/dk1s10/dk1s10.c
View File

@ -1,72 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#if defined(CONFIG_SEVENSEG)
#include "../common/sevenseg.h"
#endif
void _default_hdlr (void)
{
printf ("default_hdlr\n");
}
int board_early_init_f (void)
{
#if defined(CONFIG_SEVENSEG)
/* init seven segment led display and switch off */
sevenseg_set(SEVENSEG_OFF);
#endif
return 0;
}
int checkboard (void)
{
puts ("Board: Altera Nios 1S10 Development Kit\n");
#if defined(CONFIG_NIOS_SAFE_32)
puts ("Conf.: Altera Safe 32 (safe_32)\n");
#elif defined(CONFIG_NIOS_STANDARD_32)
puts ("Conf.: Altera Standard 32 (standard_32)\n");
#elif defined(CONFIG_NIOS_MTX_LDK_20)
puts ("Conf.: Microtronix LDK 2.0 (LDK2)\n");
#endif
return 0;
}
phys_size_t initdram (int board_type)
{
return (0);
}
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif

62
board/altera/dk1s10/flash.c
View File

@ -1,62 +0,0 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nios.h>
/*
* include common flash code (for altera boards)
*/
#include "../common/flash.c"
/*---------------------------------------------------------------------*/
#define BANKSZ (8 * 1024 * 1024)
#define SECTSZ (64 * 1024)
#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
/*---------------------------------------------------------------------*/
unsigned long flash_init (void)
{
int i;
unsigned long addr;
flash_info_t *fli = &flash_info[0];
fli->size = BANKSZ;
fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
/* Protect all but 2 MByte user area */
if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
fli->protect[i] = 0;
else
fli->protect[i] = 1;
}
return (BANKSZ);
}

33
board/altera/dk1s10/misc.c
View File

@ -1,33 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* board/altera/dk1s10/misc.c
*
* miscellaneous board interfaces / drivers
*/
#include <common.h>
#if defined(CONFIG_SEVENSEG)
#include "../common/sevenseg.h"
#include "../common/sevenseg.c"
#endif

70
board/altera/dk1s10/u-boot.lds
View File

@ -1,70 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-nios")
OUTPUT_ARCH(nios)
ENTRY(_start)
SECTIONS
{
.text :
{
arch/nios/cpu/start.o (.text)
*(.text)
}
__text_end = .;
. = ALIGN(4);
.rodata :
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
__rodata_end = .;
. = ALIGN(4);
.data :
{
*(.data)
}
. = ALIGN(4);
__data_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd :
{
*(.u_boot_cmd)
}
. = ALIGN(4);
__u_boot_cmd_end = .;
__bss_start = .;
. = ALIGN(4);
.bss (NOLOAD) :
{
*(.bss)
}
. = ALIGN(4);
__bss_end = .;
}

139
board/altera/dk1s10/vectors.S
View File

@ -1,139 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
/*************************************************************************
* Exception Vector Table
*
* This could have gone in the cpu soure tree, but the whole point of
* Nios is customization -- and polluting the cpu source tree with
* board-specific ifdef's really defeats the purpose, no? With this in
* the board-specific tree, each board has the freedom to organize
* vectors/traps, etc anyway it wants. The init code copies this table
* to the proper location.
*
* Each board can do what it likes here. But there are four "standard"
* handlers availble:
*
* _cwp_lolimit -Handles register window underflows.
* _cwp_hilimit -Handles register window overflows.
* _timebase_int -Increments the timebase.
* _def_xhandler -Default exception handler.
*
* _timebase_int handles a Nios Timer interrupt and increments the
* timestamp used for the get_timer(), reset_timer(), etc. routines. It
* expects the timer to be configured like the standard-32 low priority
* timer.
*
* _def_xhandler dispatches exceptions/traps via the external_interrupt()
* routine. This lets you use the irq_install_handler() and handle your
* interrupts/traps with code written in C.
************************************************************************/
.data
.global _vectors
.align 4
_vectors:
#if defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
/* OCI does the reset job */
.long _def_xhandler@h /* Vector 0 - NMI / Reset */
#else
/* there is no OCI, so we have to do a direct reset jump here */
.long CONFIG_SYS_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
#endif
.long _cwp_lolimit@h /* Vector 1 - underflow */
.long _cwp_hilimit@h /* Vector 2 - overflow */
.long _def_xhandler@h /* Vector 3 - GNUPro debug */
.long _def_xhandler@h /* Vector 4 - GNUPro debug */
.long _def_xhandler@h /* Vector 5 - GNUPro debug */
.long _def_xhandler@h /* Vector 6 - future reserved */
.long _def_xhandler@h /* Vector 7 - future reserved */
.long _def_xhandler@h /* Vector 8 - future reserved */
.long _def_xhandler@h /* Vector 9 - future reserved */
.long _def_xhandler@h /* Vector 10 - future reserved */
.long _def_xhandler@h /* Vector 11 - future reserved */
.long _def_xhandler@h /* Vector 12 - future reserved */
.long _def_xhandler@h /* Vector 13 - future reserved */
.long _def_xhandler@h /* Vector 14 - future reserved */
.long _def_xhandler@h /* Vector 15 - future reserved */
#if (CONFIG_SYS_NIOS_TMRIRQ == 16)
.long _timebase_int@h /* Vector 16 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 16 */
#endif
.long _def_xhandler@h /* Vector 17 */
.long _def_xhandler@h /* Vector 18 */
.long _def_xhandler@h /* Vector 19 */
.long _def_xhandler@h /* Vector 20 */
.long _def_xhandler@h /* Vector 21 */
.long _def_xhandler@h /* Vector 22 */
.long _def_xhandler@h /* Vector 23 */
.long _def_xhandler@h /* Vector 24 */
.long _def_xhandler@h /* Vector 25 */
.long _def_xhandler@h /* Vector 26 */
.long _def_xhandler@h /* Vector 27 */
.long _def_xhandler@h /* Vector 28 */
.long _def_xhandler@h /* Vector 29 */
.long _def_xhandler@h /* Vector 30 */
.long _def_xhandler@h /* Vector 31 */
.long _def_xhandler@h /* Vector 32 */
.long _def_xhandler@h /* Vector 33 */
.long _def_xhandler@h /* Vector 34 */
.long _def_xhandler@h /* Vector 35 */
.long _def_xhandler@h /* Vector 36 */
.long _def_xhandler@h /* Vector 37 */
.long _def_xhandler@h /* Vector 38 */
.long _def_xhandler@h /* Vector 39 */
.long _def_xhandler@h /* Vector 40 */
.long _def_xhandler@h /* Vector 41 */
.long _def_xhandler@h /* Vector 42 */
.long _def_xhandler@h /* Vector 43 */
.long _def_xhandler@h /* Vector 44 */
.long _def_xhandler@h /* Vector 45 */
.long _def_xhandler@h /* Vector 46 */
.long _def_xhandler@h /* Vector 47 */
.long _def_xhandler@h /* Vector 48 */
.long _def_xhandler@h /* Vector 49 */
#if (CONFIG_SYS_NIOS_TMRIRQ == 50)
.long _timebase_int@h /* Vector 50 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 50 */
#endif
.long _def_xhandler@h /* Vector 51 */
.long _def_xhandler@h /* Vector 52 */
.long _def_xhandler@h /* Vector 53 */
.long _def_xhandler@h /* Vector 54 */
.long _def_xhandler@h /* Vector 55 */
.long _def_xhandler@h /* Vector 56 */
.long _def_xhandler@h /* Vector 57 */
.long _def_xhandler@h /* Vector 58 */
.long _def_xhandler@h /* Vector 59 */
.long _def_xhandler@h /* Vector 60 */
.long _def_xhandler@h /* Vector 61 */
.long _def_xhandler@h /* Vector 62 */
.long _def_xhandler@h /* Vector 63 */

51
board/ssv/adnpesc1/Makefile
View File

@ -1,51 +0,0 @@
#
# (C) Copyright 2001-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).a
COBJS := $(BOARD).o flash.o misc.o
SOBJS := vectors.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
clean:
rm -f $(SOBJS) $(OBJS)
distclean: clean
rm -f $(LIB) core *.bak $(obj).depend
#########################################################################
# defines $(obj).depend target
include $(SRCTREE)/rules.mk
sinclude $(obj).depend
#########################################################################

103
board/ssv/adnpesc1/adnpesc1.c
View File

@ -1,103 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
#include <nios-io.h>
#include <spi.h>
#if defined(CONFIG_HW_WATCHDOG)
extern void ssv_wd_pio_init(void); /* comes from ../common/wd_pio.c
included by ./misc.c */
#endif
void _default_hdlr (void)
{
printf ("default_hdlr\n");
}
int board_early_init_f (void)
{
#if defined(CONFIG_HW_WATCHDOG)
ssv_wd_pio_init();
#endif
return 0;
}
int checkboard (void)
{
puts ( "Board: SSV DilNetPC ADNP/ESC1"
#if defined(CONFIG_DNPEVA2)
" on DNP/EVA2"
#endif
"\n");
#if defined(CONFIG_NIOS_BASE_32)
puts ("Conf.: SSV Base 32 (nios_32)\n");
#endif
return 0;
}
phys_size_t initdram (int board_type)
{
return (0);
}
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
#if defined(CONFIG_CMD_SPI) && CONFIG_NIOS_SPI
#define SPI_RTC_CS_MASK 0x00000001
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
return bus == 0 && cs == 0;
}
void spi_cs_activate(struct spi_slave *slave)
{
nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
}
void spi_cs_deactivate(struct spi_slave *slave)
{
nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
spi->slaveselect = 0; /* deactivate (0) */
}
#endif
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_CS8900
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
#endif
return rc;
}
#endif

29
board/ssv/adnpesc1/config.mk
View File

@ -1,29 +0,0 @@
#
# (C) Copyright 2004
# Li-Pro.Net <www.li-pro.net>
# Stephan Linz <linz@li-pro.net>
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
TEXT_BASE = 0x02fc0000 # ATTENTION: notice your CONFIG_SYS_MONITOR_LEN setting
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif

66
board/ssv/adnpesc1/flash.c
View File

@ -1,66 +0,0 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <nios.h>
/*
* include common flash code (for ssv boards)
*/
#include "../common/flash.c"
/*---------------------------------------------------------------------*/
#define BANKSZ (8 * 1024 * 1024)
#define SECTSZ (64 * 1024)
#define UBOOTSECS ((CONFIG_SYS_MONITOR_LEN + CONFIG_ENV_SIZE) / SECTSZ)
#define UBOOTAREA (UBOOTSECS * 64 * 1024) /* monitor / env area */
/*---------------------------------------------------------------------*/
unsigned long flash_init (void)
{
int i;
unsigned long addr;
flash_info_t *fli = &flash_info[0];
fli->size = BANKSZ;
fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
fli->flash_id = FLASH_MAN_AMD + FLASH_AMLV640U;
addr = CONFIG_SYS_FLASH_BASE;
for (i = 0; i < fli->sector_count; ++i) {
fli->start[i] = addr;
addr += SECTSZ;
/* Protect monitor / environment area */
if (addr <= (CONFIG_SYS_FLASH_BASE + UBOOTAREA))
fli->protect[i] = 1;
else
fli->protect[i] = 0;
}
return (BANKSZ);
}

40
board/ssv/adnpesc1/misc.c
View File

@ -1,40 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* board/ssv/adnpesc1/misc.c
*
* miscellaneous board interfaces / drivers
*/
#include <common.h>
#if defined(CONFIG_STATUS_LED)
#include "../common/cmd_sled.c"
#endif
#if defined(CONFIG_HW_WATCHDOG)
#include "../common/wd_pio.c"
#endif
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
#include "../common/post.c"
#endif

70
board/ssv/adnpesc1/u-boot.lds
View File

@ -1,70 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
OUTPUT_FORMAT("elf32-nios")
OUTPUT_ARCH(nios)
ENTRY(_start)
SECTIONS
{
.text :
{
arch/nios/cpu/start.o (.text)
*(.text)
}
__text_end = .;
. = ALIGN(4);
.rodata :
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
__rodata_end = .;
. = ALIGN(4);
.data :
{
*(.data)
}
. = ALIGN(4);
__data_end = .;
. = .;
__u_boot_cmd_start = .;
.u_boot_cmd :
{
*(.u_boot_cmd)
}
. = ALIGN(4);
__u_boot_cmd_end = .;
__bss_start = .;
. = ALIGN(4);
.bss (NOLOAD) :
{
*(.bss)
}
. = ALIGN(4);
__bss_end = .;
}

138
board/ssv/adnpesc1/vectors.S
View File

@ -1,138 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
/*************************************************************************
* Exception Vector Table
*
* This could have gone in the cpu soure tree, but the whole point of
* Nios is customization -- and polluting the cpu source tree with
* board-specific ifdef's really defeats the purpose, no? With this in
* the board-specific tree, each board has the freedom to organize
* vectors/traps, etc anyway it wants. The init code copies this table
* to the proper location.
*
* Each board can do what it likes here. But there are four "standard"
* handlers availble:
*
* _cwp_lolimit -Handles register window underflows.
* _cwp_hilimit -Handles register window overflows.
* _timebase_int -Increments the timebase.
* _def_xhandler -Default exception handler.
*
* _timebase_int handles a Nios Timer interrupt and increments the
* timestamp used for the get_timer(), reset_timer(), etc. routines. It
* expects the timer to be configured like the standard-32 low priority
* timer.
*
* _def_xhandler dispatches exceptions/traps via the external_interrupt()
* routine. This lets you use the irq_install_handler() and handle your
* interrupts/traps with code written in C.
************************************************************************/
.data
.global _vectors
.align 4
_vectors:
#if defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
/* OCI does the reset job */
.long _def_xhandler@h /* Vector 0 - NMI / Reset */
#else
/* there is no OCI, so we have to do a direct reset jump here */
.long CONFIG_SYS_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
#endif
.long _cwp_lolimit@h /* Vector 1 - underflow */
.long _cwp_hilimit@h /* Vector 2 - overflow */
.long _def_xhandler@h /* Vector 3 - GNUPro debug */
.long _def_xhandler@h /* Vector 4 - GNUPro debug */
.long _def_xhandler@h /* Vector 5 - GNUPro debug */
.long _def_xhandler@h /* Vector 6 - future reserved */
.long _def_xhandler@h /* Vector 7 - future reserved */
.long _def_xhandler@h /* Vector 8 - future reserved */
.long _def_xhandler@h /* Vector 9 - future reserved */
.long _def_xhandler@h /* Vector 10 - future reserved */
.long _def_xhandler@h /* Vector 11 - future reserved */
.long _def_xhandler@h /* Vector 12 - future reserved */
.long _def_xhandler@h /* Vector 13 - future reserved */
.long _def_xhandler@h /* Vector 14 - future reserved */
.long _def_xhandler@h /* Vector 15 - future reserved */
#if (CONFIG_SYS_NIOS_TMRIRQ == 16)
.long _timebase_int@h /* Vector 16 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 16 */
#endif
.long _def_xhandler@h /* Vector 17 */
.long _def_xhandler@h /* Vector 18 */
.long _def_xhandler@h /* Vector 19 */
.long _def_xhandler@h /* Vector 20 */
.long _def_xhandler@h /* Vector 21 */
.long _def_xhandler@h /* Vector 22 */
.long _def_xhandler@h /* Vector 23 */
.long _def_xhandler@h /* Vector 24 */
.long _def_xhandler@h /* Vector 25 */
.long _def_xhandler@h /* Vector 26 */
.long _def_xhandler@h /* Vector 27 */
.long _def_xhandler@h /* Vector 28 */
.long _def_xhandler@h /* Vector 29 */
.long _def_xhandler@h /* Vector 30 */
.long _def_xhandler@h /* Vector 31 */
.long _def_xhandler@h /* Vector 32 */
.long _def_xhandler@h /* Vector 33 */
.long _def_xhandler@h /* Vector 34 */
.long _def_xhandler@h /* Vector 35 */
.long _def_xhandler@h /* Vector 36 */
.long _def_xhandler@h /* Vector 37 */
.long _def_xhandler@h /* Vector 38 */
.long _def_xhandler@h /* Vector 39 */
.long _def_xhandler@h /* Vector 40 */
.long _def_xhandler@h /* Vector 41 */
.long _def_xhandler@h /* Vector 42 */
.long _def_xhandler@h /* Vector 43 */
.long _def_xhandler@h /* Vector 44 */
.long _def_xhandler@h /* Vector 45 */
.long _def_xhandler@h /* Vector 46 */
.long _def_xhandler@h /* Vector 47 */
.long _def_xhandler@h /* Vector 48 */
.long _def_xhandler@h /* Vector 49 */
#if (CONFIG_SYS_NIOS_TMRIRQ == 50)
.long _timebase_int@h /* Vector 50 - lopri timer*/
#else
.long _def_xhandler@h /* Vector 50 */
#endif
.long _def_xhandler@h /* Vector 51 */
.long _def_xhandler@h /* Vector 52 */
.long _def_xhandler@h /* Vector 53 */
.long _def_xhandler@h /* Vector 54 */
.long _def_xhandler@h /* Vector 55 */
.long _def_xhandler@h /* Vector 56 */
.long _def_xhandler@h /* Vector 57 */
.long _def_xhandler@h /* Vector 58 */
.long _def_xhandler@h /* Vector 59 */
.long _def_xhandler@h /* Vector 60 */
.long _def_xhandler@h /* Vector 61 */
.long _def_xhandler@h /* Vector 62 */
.long _def_xhandler@h /* Vector 63 */

162
board/ssv/common/cmd_sled.c
View File

@ -1,162 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <status_led.h>
#if defined(CONFIG_STATUS_LED)
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! Q u i c k & D i r t y H a c k !!!!!
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
* !!!!! !!!!!
* !!!!! Next type definition was coming from original !!!!!
* !!!!! status LED driver drivers/misc/status_led.c !!!!!
* !!!!! and should be exported for using it here. !!!!!
* !!!!! !!!!!
* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
typedef struct {
led_id_t mask;
int state;
int period;
int cnt;
} led_dev_t;
extern led_dev_t led_dev[];
#if defined(CONFIG_CMD_BSP)
int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int led_id = 0;
if (argc > 1) {
#ifdef STATUS_LED_BOOT
if (!strcmp (argv[1], "boot")) {
led_id = STATUS_LED_BOOT + 1;
}
#endif
#ifdef STATUS_LED_RED
if (!strcmp (argv[1], "red")) {
led_id = STATUS_LED_RED + 1;
}
#endif
#ifdef STATUS_LED_YELLOW
if (!strcmp (argv[1], "yellow")) {
led_id = STATUS_LED_YELLOW + 1;
}
#endif
#ifdef STATUS_LED_GREEN
if (!strcmp (argv[1], "green")) {
led_id = STATUS_LED_GREEN + 1;
}
#endif
}
switch (argc) {
case 1:
#if (STATUS_LED_BITS > 3)
for (; led_id < 4; led_id++)
#elif (STATUS_LED_BITS > 2)
for (; led_id < 3; led_id++)
#elif (STATUS_LED_BITS > 1)
for (; led_id < 2; led_id++)
#elif (STATUS_LED_BITS > 0)
for (; led_id < 1; led_id++)
#else
#error "*** STATUS_LED_BITS not correct defined ***"
#endif
{
printf ("Status LED '%s' is %s\n",
led_id == STATUS_LED_BOOT ? "boot"
: led_id == STATUS_LED_RED ? "red"
: led_id == STATUS_LED_YELLOW ? "yellow"
: led_id ==
STATUS_LED_GREEN ? "green" : "unknown",
led_dev[led_id].state ==
STATUS_LED_ON ? "on" : led_dev[led_id].
state ==
STATUS_LED_OFF ? "off" : led_dev[led_id].
state ==
STATUS_LED_BLINKING ? "blinking" : "unknown");
}
return 0;
case 2:
if (led_id) {
printf ("Status LED '%s' is %s\n", argv[1],
led_dev[led_id - 1].state ==
STATUS_LED_ON ? "on" : led_dev[led_id -
1].state ==
STATUS_LED_OFF ? "off" : led_dev[led_id -
1].state ==
STATUS_LED_BLINKING ? "blinking" : "unknown");
return 0;
} else
break;
case 3:
if (led_id) {
if (!strcmp (argv[2], "on")) {
status_led_set (led_id - 1, STATUS_LED_ON);
return 0;
} else if (!strcmp (argv[2], "off")) {
status_led_set (led_id - 1, STATUS_LED_OFF);
return 0;
} else if (!strcmp (argv[2], "blink")) {
status_led_set (led_id - 1,
STATUS_LED_BLINKING);
return 0;
} else
break;
} else
break;
default:
break;
}
cmd_usage(cmdtp);
return 1;
}
#ifdef STATUS_LED_BOOT
#ifdef STATUS_LED_RED
#ifdef STATUS_LED_YELLOW
#ifdef STATUS_LED_GREEN
#define __NAME_STR " - name: boot|red|yellow|green\n"
#else
#define __NAME_STR " - name: boot|red|yellow\n"
#endif
#else
#define __NAME_STR " - name: boot|red\n"
#endif
#else
#define __NAME_STR " - name: boot\n"
#endif
#else
#define __NAME_STR " - name: (no such defined)\n"
#endif
U_BOOT_CMD (sled, 3, 0, do_sled,
"check and set status led",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink");
#endif
#endif /* CONFIG_STATUS_LED */

207
board/ssv/common/flash.c
View File

@ -1,207 +0,0 @@
/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <nios.h>
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/*--------------------------------------------------------------------*/
void flash_print_info (flash_info_t * info)
{
int i, k;
unsigned long size;
int erased;
volatile unsigned char *flash;
printf (" Size: %ld KB in %d Sectors\n",
info->size >> 10, info->sector_count);
printf (" Sector Start Addresses:");
for (i = 0; i < info->sector_count; ++i) {
/* Check if whole sector is erased */
if (i != (info->sector_count - 1))
size = info->start[i + 1] - info->start[i];
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
flash = (volatile unsigned char *) info->start[i];
for (k = 0; k < size; k++) {
if (*flash++ != 0xff) {
erased = 0;
break;
}
}
/* Print the info */
if ((i % 5) == 0)
printf ("\n ");
printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
info->protect[i] ? "RO " : " ");
}
printf ("\n");
}
/*-------------------------------------------------------------------*/
int flash_erase (flash_info_t * info, int s_first, int s_last)
{
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
int prot, sect, wait;
unsigned oldpri;
ulong start;
/* Some sanity checking */
if ((s_first < 0) || (s_first > s_last)) {
printf ("- no sectors to erase\n");
return 1;
}
prot = 0;
for (sect = s_first; sect <= s_last; ++sect) {
if (info->protect[sect]) {
prot++;
}
}
if (prot) {
printf ("- Warning: %d protected sectors will not be erased!\n",
prot);
} else {
printf ("\n");
}
#ifdef DEBUG
for (sect = s_first; sect <= s_last; sect++) {
printf("- Erase: Sect: %i @ 0x%08x\n", sect, info->start[sect]);
}
#endif
/* NOTE: disabling interrupts on Nios can be very bad since it
* also disables the LO_LIMIT exception. It's better here to
* set the interrupt priority to 3 & restore it when we're done.
*/
oldpri = ipri (3);
/* It's ok to erase multiple sectors provided we don't delay more
* than 50 usec between cmds ... at which point the erase time-out
* occurs. So don't go and put printf() calls in the loop ... it
* won't be very helpful ;-)
*/
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
*addr = 0xf0;
*(addr+0xAAA/2) = 0xaa;
*(addr+0x554/2) = 0x55;
*(addr+0xAAA/2) = 0x80;
*(addr+0xAAA/2) = 0xaa;
*(addr+0x554/2) = 0x55;
*addr2 = 0x30;
/* Now just wait for 0xffff & provide some user
* feedback while we wait. Here we have to grant
* timer interrupts. Otherwise get_timer() can't
* work right. */
ipri(oldpri);
start = get_timer (0);
while (*addr2 != 0xffff) {
for (wait = 8; wait; wait--) {
udelay (125 * 1000);
}
putc ('.');
if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("timeout\n");
return 1;
}
}
oldpri = ipri (3); /* disallow non important irqs again */
}
}
printf ("\n");
*addr = 0xf0;
/* Restore interrupt priority */
ipri (oldpri);
return 0;
}
/*-----------------------------------------------------------------------
* Copy memory to flash, returns:
* 0 - OK
* 1 - write timeout
* 2 - Flash not erased
*/
int write_buff (flash_info_t * info, uchar * srcbuffer, ulong addr, ulong cnt)
{
volatile CONFIG_SYS_FLASH_WORD_SIZE *cmd = (vu_short *) info->start[0];
volatile CONFIG_SYS_FLASH_WORD_SIZE *dst = (vu_short *) addr;
CONFIG_SYS_FLASH_WORD_SIZE *src = (void *) srcbuffer;
CONFIG_SYS_FLASH_WORD_SIZE b;
unsigned oldpri;
ulong start;
cnt /= sizeof(CONFIG_SYS_FLASH_WORD_SIZE);
while (cnt) {
/* Check for sufficient erase */
b = *src;
if ((*dst & b) != b) {
printf ("%02x : %02x\n", *dst, b);
return (2);
}
/* Disable interrupts other than window underflow
* (interrupt priority 2)
*/
oldpri = ipri (3);
*(cmd+0xAAA/2) = 0xaa;
*(cmd+0x554/2) = 0x55;
*(cmd+0xAAA/2) = 0xa0;
ipri (oldpri);
*dst = b;
/* Verify write */
start = get_timer (0);
while (*dst != b) {
if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*cmd = 0xf0;
return 1;
}
}
dst++;
src++;
cnt--;
}
*cmd = 0xf0;
return (0);
}

44
board/ssv/common/post.c
View File

@ -1,44 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
#if !defined(CONFIG_SYS_NIOS_POST_WORD_ADDR)
#error "*** CONFIG_SYS_NIOS_POST_WORD_ADDR not defined ***"
#endif
void post_word_store (ulong a)
{
volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
*(volatile ulong *) save_addr = a;
}
ulong post_word_load (void)
{
volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
return *(volatile ulong *) save_addr;
}
#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/

160
board/ssv/common/wd_pio.c
View File

@ -1,160 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <nios.h>
#include <nios-io.h>
#if defined(CONFIG_HW_WATCHDOG)
#if !defined(CONFIG_HW_WDENA_BASE)
#error "*** CONFIG_HW_WDENA_BASE not defined ***"
#if !defined(CONFIG_HW_WDENA_BIT)
#error "*** CONFIG_HW_WDENA_BIT not defined ***"
#endif
#endif
#if !defined(CONFIG_HW_WDTOG_BASE)
#error "*** CONFIG_HW_WDTOG_BASE not defined ***"
#if !defined(CONFIG_HW_WDTOG_BIT)
#error "*** CONFIG_HW_WDTOG_BIT not defined ***"
#endif
#endif
#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
static unsigned __wd_ena_pio_portval = 0;
#endif
#define WD_PIO_INIT_DONE(V) ((V) & (1 << CONFIG_HW_WDENA_BIT))
void ssv_wd_pio_init(void)
{
nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
nios_pio_t *trg_piop = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
trg_piop->data &= ~(1 << CONFIG_HW_WDTOG_BIT);
#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
__wd_ena_pio_portval |= (1 << CONFIG_HW_WDENA_BIT);
ena_piop->data = __wd_ena_pio_portval;
#else /* !CONFIG_HW_WDPORT_WRONLY */
trg_piop->direction |= (1 << CONFIG_HW_WDTOG_BIT);
ena_piop->data |= (1 << CONFIG_HW_WDENA_BIT);
ena_piop->direction |= (1 << CONFIG_HW_WDENA_BIT);
#endif /* CONFIG_HW_WDPORT_WRONLY */
}
void ssv_wd_pio_done(void)
{
nios_pio_t *piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
__wd_ena_pio_portval &= ~(1 << CONFIG_HW_WDENA_BIT);
piop->data = __wd_ena_pio_portval;
#else /* !CONFIG_HW_WDPORT_WRONLY */
piop->data &= ~(1 << CONFIG_HW_WDENA_BIT);
#endif /* CONFIG_HW_WDPORT_WRONLY */
}
void ssv_wd_pio_reset(void)
{
nios_pio_t *trg_piop = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
#ifdef CONFIG_HW_WDPORT_WRONLY
if (WD_PIO_INIT_DONE(__wd_ena_pio_portval))
#else
nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
if (WD_PIO_INIT_DONE(ena_piop->data))
#endif
{
trg_piop->data |= (1 << CONFIG_HW_WDTOG_BIT);
trg_piop->data &= ~(1 << CONFIG_HW_WDTOG_BIT);
}
}
void hw_watchdog_reset(void)
{
int re_enable = disable_interrupts ();
ssv_wd_pio_reset();
if (re_enable)
enable_interrupts ();
}
#if defined(CONFIG_CMD_BSP)
int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
switch (argc)
{
case 1:
printf ("Watchdog timer status is %s\n",
#ifdef CONFIG_HW_WDPORT_WRONLY
WD_PIO_INIT_DONE(__wd_ena_pio_portval)
#else
WD_PIO_INIT_DONE(ena_piop->data)
#endif
? "on" : "off");
return 0;
case 2:
if (!strcmp(argv[1],"on"))
{
ssv_wd_pio_init();
printf("Watchdog timer now is on\n");
return 0;
}
else if (!strcmp(argv[1],"off"))
{
ssv_wd_pio_done();
printf("Watchdog timer now is off\n");
return 0;
}
break;
default:
break;
}
cmd_usage(cmdtp);
return 1;
}
U_BOOT_CMD(
wd, 2, 1, do_wd,
"check and set watchdog",
"on - switch watchDog on\n"
"wd off - switch watchdog off\n"
"wd - print current status"
);
#endif
#endif /* CONFIG_HW_WATCHDOG */

19
common/cmd_bdinfo.c
View File

@ -119,25 +119,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return 0;
}
#elif defined(CONFIG_NIOS) /* NIOS*/
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
bd_t *bd = gd->bd;
print_num ("memstart", (ulong)bd->bi_memstart);
print_lnum ("memsize", (u64)bd->bi_memsize);
print_num ("flashstart", (ulong)bd->bi_flashstart);
print_num ("flashsize", (ulong)bd->bi_flashsize);
print_num ("flashoffset", (ulong)bd->bi_flashoffset);
print_eth(0);
printf ("ip_addr = %pI4\n", &bd->bi_ip_addr);
printf ("baudrate = %ld bps\n", bd->bi_baudrate);
return 0;
}
#elif defined(CONFIG_NIOS2) /* Nios-II */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

2
common/cmd_bootm.c
View File

@ -174,8 +174,6 @@ void arch_preboot_os(void) __attribute__((weak, alias("__arch_preboot_os")));
#define IH_INITRD_ARCH IH_ARCH_MICROBLAZE
#elif defined(__mips__)
#define IH_INITRD_ARCH IH_ARCH_MIPS
#elif defined(__nios__)
#define IH_INITRD_ARCH IH_ARCH_NIOS
#elif defined(__nios2__)
#define IH_INITRD_ARCH IH_ARCH_NIOS2
#elif defined(__PPC__)

1
common/image.c
View File

@ -84,7 +84,6 @@ static table_entry_t uimage_arch[] = {
{ IH_ARCH_MICROBLAZE, "microblaze", "MicroBlaze", },
{ IH_ARCH_MIPS, "mips", "MIPS", },
{ IH_ARCH_MIPS64, "mips64", "MIPS 64 Bit", },
{ IH_ARCH_NIOS, "nios", "NIOS", },
{ IH_ARCH_NIOS2, "nios2", "NIOS II", },
{ IH_ARCH_PPC, "powerpc", "PowerPC", },
{ IH_ARCH_PPC, "ppc", "PowerPC", },

8
config.mk
View File

@ -191,14 +191,6 @@ endif
CFLAGS += $(call cc-option,-fno-stack-protector)
# avoid trigraph warnings while parsing pci.h (produced by NIOS gcc-2.9)
# this option have to be placed behind -Wall -- that's why it is here
ifeq ($(ARCH),nios)
ifeq ($(findstring 2.9,$(shell $(CC) --version)),2.9)
CFLAGS := $(CPPFLAGS) -Wall -Wno-trigraphs
endif
endif
# $(CPPFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
# option to the assembler.
AFLAGS_DEBUG :=

235
doc/README.adnpesc1
View File

@ -1,235 +0,0 @@
SSV ADNP/ESC1 Embedded Softcore Computing
Nios Softcore, Altera Cyclone FPGA
Last Update: February 27, 2004
====================================================================
This file contains information regarding U-Boot and the SSV Embedded
Nios Softcore Computing platform ADNP/ESC1. For general Nios
information see doc/README.nios.
Most stuff of this file was borrowed and based on README.dk1s10,
the Altera DK-1S10 related information file.
For those interested in contributing ... see HELP WANTED section
in doc/README.nios.
Contents:
1. Files
2. Memory Organization
3. CPU Variations
4. Examples
5. Programming U-Boot into FLASH with GERMS
6. Autoboot
7. U-Boot environment convention and update philosophy
====================================================================
1. Files
=========
board/ssv/adnpesc1/*
include/configs/ADNPESC1.h
include/configs/ADNPESC1_base_32.h
2. Memory Organization
=======================
For the most part, you can put things pretty much anywhere.
This is pretty flexible for Nios. So here we make some arbitrary
choices & assume that the monitor is placed at the end of a memory
resource. So you must make sure TEXT_BASE is chosen appropriately.
This is very important if you plan to move your memory to another
place as configured at this time!
-The heap is placed below the monitor (U-Boot code).
-Global data is placed below the heap.
-The stack is placed below global data (&grows down).
(see doc/README.adnpesc1_base32 too)
3. CPU Variations
=================
There are more than one NIOS CPU variation for the ADNP/ESC1 possible.
U-Boot supports the following CPU configurations:
- SSV Basis 32 (make ADNPESC1_base_32_config)
- SSV Basis 32 at DNP evaluation base board 2
(make ADNPESC1_DNPEVA2_base_32_config)
4. Examples
============
The hello_world example works fine. To try out you have to change
the default load address from 0x0100_0000 to 0x0204_0000 in
examples/Makefile (the real SDRAM for default board configuration).
5. Programming U-Boot into FLASH with GERMS
============================================
The current version of the ADNP/ESC1 port with the default
configuration settings occupies about 97 KBytes of flash.
A minimal configuration occupies less than 70 KByte
(network, SPI, POST and board command support disabled). You
can save more memory by deactivating the Hu-Shell support and
long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
To program U-Boot into the ADNP/ESC1 flash using GERMS do the
following:
1. Download U-Boot to its target run space in SDRAM:
a. Close jumper RCM_EN# and push the reset button.
b. From the command line, download U-Boot using the
nios-run:
$ nios-run -r u-boot.srec
NOTE: In some cases this want fail. I don't know why,
but try again.
This takes about 1 minute (GERMS is not very speedy here).
After u-boot is downloaded it will be executed. You should
see the following:
U-Boot 1.0.2 (Jan 30 2004 - 12:59:15)
CPU: Nios-32 Rev. 3.3 (0x3038)
Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30
Board: SSV DilNetPC ADNP/ESC1
Conf.: SSV Base 32 (nios_32)
In: serial
Out: serial
Err: serial
ADNPESC1 >
2. Quit nios-run and start your terminal application (e.g. start
Hyperterminal or minicom).
3. Download the u-boot code to RAM. When using Hyperterminal, do the
following:
a. From the u-boot command prompt start a binary download to SDRAM:
at the SSV Basis 32 to SDRAM:
==> loadb 2000100
b. Download u-boot.bin using kermit.
4. From the U-Boot command prompt, erase flash:
at the SSV Basis 32 from 0x1000000 to 0x103ffff:
==> protect off 1:0-3
==> erase 1:0-3
5. Copy the binary image from SDRAM to flash:
at the SSV Basis 32 from SDRAM:
==> cp.b 2000100 1000000 $filesize
U-Boot will now automatically start when the board is powered on or
reset using the SSV Basis 32 configuration without closed RCM jumper.
To start U-Boot with closed RCM Jumper, enter the following GERMS
command:
+ g 1000000
6. Autoboot
===========
U-Boot will try to boot a valid Nios application from Flash. For this
it will use the deposited Hu-Shell script in environment variable
'bootcmd' which is looking for a valid Nios application identifier
string in Flash and go on at even its entry address. For more
information see the next chapter.
7. U-Boot environment convention and update philosophy
======================================================
U-Boot for the SSV ADNP/ESC1 target knows about many environment
variables used to control the startup process, update process for
raw Nios applications, and optionally file system image updates.
In default configuration there are two Hu-Shell scripts to update
the Nios application and/or the file system image:
1. Update Nios application (ex. the uCLinux kernel):
run 'appl_update'
2. Update optional file system image (ex. RomFS image used by uCLinux):
run 'fs_update'
The Nios application can be any programm code generated in relation
to the Nios application identifier -- the string "Nios" at offset
address 0x0c. To use the scripts like described above in a secure way
you have to check-up the next environment variables:
1. update_allowed
- Update switch -- must be set to '1' (one) to allow any update
- default is '0' (zero)
NOTE: You should avoid to save this variable with non zero
value to Flash. Otherwise it would be allow any
update process at any time!
2. appl_entry_addr
- Nios application area start address (usually in Flash)
- this is the startup address for autoboot
- each Nios application code we want to update will be copied
to this address
- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
3. appl_end_addr
- Nios application area end address (usually in Flash)
- will be used to unprotect/erase the Flash area while updating
- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
4. appl_ident_addr
- address of the Nios application identification string
- this is the address checked-up by autoboot
- default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
5. appl_ident_str
- the Nios application identification string itself
- default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
6. appl_name
- name of file we have to download/update
- default is ADNPESC1/base32/linux.bin
7. fs_base_addr
- optionally file system area start address (usually in Flash)
- each file system we want to update will be copied to this address
- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
8. fs_end_addr
- optionally file system area end address (usually in Flash)
- will be used to unprotect/erase the Flash area while updating
- default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
9. fs_name
- name of file we have to download/update
- default is ADNPESC1/base32/romfs.img

469
doc/README.adnpesc1_base32
View File

@ -1,469 +0,0 @@
TODO: specify IDE i/f
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[5]
CPU: "DNP_ESC1"
32 bit NIOS for 50 MHz
512 Byte for register file (30 levels)
with out instruction cache
with out data cache
2 KByte On Chip ROM with GERMS boot monitor
with out On Chip RAM
MSTEP multiplier
no Debug Core
no On Chip Instrumentation (OCI)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
IRQ: Nr. | used by
------+--------------------------------------------------------
16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ =
| PIO6 | CONFIG_SYS_NIOS_CPU_PIO6_IRQ = 20
25 | SPI0 | CONFIG_SYS_NIOS_CPU_SPI0_IRQ = 25
31 | PIO7 | CONFIG_SYS_NIOS_CPU_PIO7_IRQ = 31
32 | PIO8 | CONFIG_SYS_NIOS_CPU_PIO8_IRQ = 32
33 | PIO9 | CONFIG_SYS_NIOS_CPU_PIO9_IRQ = 33
34 | PIO10 | CONFIG_SYS_NIOS_CPU_PIO10_IRQ = 34
35 | PIO11 | CONFIG_SYS_NIOS_CPU_PIO11_IRQ = 35
36 | PIO12 | CONFIG_SYS_NIOS_CPU_PIO12_IRQ =
| IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 36
37 | PIO13 | CONFIG_SYS_NIOS_CPU_PIO13_IRQ =
| IDE1 | CONFIG_SYS_NIOS_CPU_IDE1_IRQ = 37
MEMORY: 8 MByte Flash
16 MByte SDRAM
Timer: TIMER0: high priority programmable timer (IRQ16)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | PORTA: 8 in/outputs for general purpose usage
PIO1 | PORTB: 8 in/outputs for general purpose usage
PIO2 | PORTC: 4 in/outputs for general purpose usage
PIO3 | RCM: 1 input for RCM_EN# jumper (Req.Conf.Mon.)
PIO4 | WDTENA: 1 output to enable the on-board watchdog
PIO5 | WDTTRIG: 1 output to trigger the on-board watchdog
PIO6 | LAN0INT: 1 input for LAN91C111 irq input (IRQ20)
PIO7 | INT1: 1 input for general purpose irq (IRQ31)
PIO8 | INT2: 1 input for general purpose irq (IRQ32)
PIO9 | INT3: 1 input for general purpose irq (IRQ33)
PIO10| INT4: 1 input for general purpose irq (IRQ34)
PIO11| INT5: 1 input for general purpose irq (IRQ35)
PIO12| INT6: 1 input for general purpose irq (IRQ36)
| IDE0INT: (same) for IDE0 irq input
PIO13| INT7: 1 input for general purpose irq (IRQ37)
| IDE1INT: (same) for IDE1 irq input
U-Boot CFG: CONFIG_SYS_NIOS_CPU_PORTA_PIO = 0
CONFIG_SYS_NIOS_CPU_PORTB_PIO = 1
CONFIG_SYS_NIOS_CPU_PORTC_PIO = 2
CONFIG_SYS_NIOS_CPU_RCM_PIO = 3
CONFIG_SYS_NIOS_CPU_WDTENA_PIO = 4
CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO = 5
CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
UART1: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ18)
SPI: SPI0: master capable, 1 slave selectable, 250kHz target clock,
2 usec targets delay between slave select and clock,
data is transferred MSB-first / LSB-last (IRQ25)
LAN: SMsC LAN91C111 with:
- without offset
- data bus width 16 bit (on-board hard wired at 32 bit bus)
- !!! 32 bit bus access --> each address * 2 !!!
IDE: (TODO)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external extension - - - - - - - - - - - - - - - - - - -
0x44000000 ---32-----------16|15------------0-
| | | \
: (real size : : |
EXT3 (CS4) : and content : : > CONFIG_SYS_NIOS_CPU_CS3_SIZE
: unknown) : : | = 0x01000000
| | | /
0x43000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS3_BASE
| | | \
: (real size : : |
EXT2 (CS3) : and content : : > CONFIG_SYS_NIOS_CPU_CS2_SIZE
: unknown) : : | = 0x01000000
| | | /
0x42000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS2_BASE
| | | \
: (real size : : |
EXT1 (CS2) : and content : : > CONFIG_SYS_NIOS_CPU_CS1_SIZE
: unknown) : : | = 0x01000000
| | | /
0x41000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS1_BASE
| | | \
: (real size : : |
EXT0 (CS1) : and content : : > CONFIG_SYS_NIOS_CPU_CS0_SIZE
: unknown) : : | = 0x01000000
| | | /
0x40000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS0_BASE
| |
: gap :
: :
- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x03000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
| . | \
| . | | (U-Boot run-time system)
| . | |
| . | > CONFIG_SYS_MONITOR_LEN
| . | | = 0x00040000
| . | |
| . | /
0x02fc0000 --+32-----------16|15------------0+ TEXT_BASE
| . | \
| . | > CONFIG_SYS_MALLOC_LEN (heap)
| . | /
--+32-----------16|15------------0+
| . | \
| . | > CONFIG_SYS_GBL_DATA_SIZE (global)
| . | /
--+32-----------16|15------------0+ CONFIG_SYS_INIT_SP (u-boot stack)
| . | \ \
| . | | |
| . | | > stack area
| . | | |
| . | | V
| . | |
| . | |
SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
| . | | = 0x01000000
| . | |
0x02000100 |- - - - - - - - - - - - - - - -+-|-
| . | | \
| . | | |
| . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| . | | | = 0x00000100
| | / /
0x02000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
| | \
: gap : > (space for 2nd Flash)
| | /
0x01800000 ---32-----------16|15------------0-
| sector 127 | \
+ 0x7f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 1 : | | = 0x00800000
+ 0x010000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x10000) | /
0x01000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
| |
: gap :
: :
- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00010020 ---32-----------16|15------------0-
| | \
| register bank | |
| size = (real_size << 1) | |
| real_size = 0x10 | |
| +--------.---.---.--- | |
| | bank 0 \ 1 \ 2 \ 3 \ | |
| |---------------------------+ | |
LAN91C111 | | BANK | RESERVED | | > na_enet_size
| |- - - - - - -|- - - - - - -| | | = 0x00000020
| | RPCR | MIR | | |
| |- - - - - - -|- - - - - - -| | |
| | COUNTER | RCR | | |
| |- - - - - - -|- - - - - - -| | |
| | EPH STATUS | TCR | | |
| +---------------------------+ | /
0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00001040 ---32-----------16|15------------0-
| | | \
: : : |
IDE1 i/f : : : > 0x00000020
[5] : : : |
| | | /
0x00001020 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE1
| | | \
: : : |
IDE0 i/f : : : > 0x00000020
[5] : : : |
| | | /
0x00001000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
| |
: gap :
| |
0x00000980 ---32-----------16|15------------0-
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO13 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO13
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO12 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO12
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO11 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000950 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO11
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO10 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO10
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO9 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000930 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO9
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO8 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000920 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO8
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO7 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000910 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO6 | interruptmask (1 bit) (rw) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
| |
: gap :
| |
0x000008e0 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| endofpacket (16 bit) (rw) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| slaveselect (1 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
SPI0 | (reserved) | |
[4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| control (11 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (9 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (16 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (16 bit) (ro) | /
0x000008c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SPI0
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO5 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x000008b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO4 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO3 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x00000890 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO2 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (4 bit) (rw) | /
0x00000880 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (8 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (8 bit) (rw) | /
0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | (unused) | |
[3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (8 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (8 bit) (rw) | /
0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[2] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART1 | (unused) | > 0x00000020
[1] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00000820 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[1] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
0x00000800 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
| : | | = 0x00000800
| : | /
0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x01800000 ---8-------------4|3-------------0-
| : | \
| : | |
| : | > 6 MByte ROM FS
| : | |
| : | /
0x01200000 --+- - - - - - - -:- - - - - - - -+- - file system image(s)
| : | \
| : | |
| : | > 1728 kByte ucLinux
| : | |
| : | /
0x01050000 --+- - - - - - - -:- - - - - - - -+- - os image(s)
| : | \
0x01040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
| : | |
| : | > 320 kByte U-Boot
| : | |
| : | |
| : | /
0x01000000 --+- - - - - - - -:- - - - - - - -+- - u-boot _start()
0x01000000 ---8-------------4|3-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[2] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[3] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[4] http://www.altera.com/literature/ds/ds_nios_spi.pdf
[5] http://www.t13.org/index.html
===============================================================================
Stephan Linz <linz@li-pro.net>

153
doc/README.dk1c20
View File

@ -1,153 +0,0 @@
Nios Development Kit
Cyclone Editions
Last Update: January 2, 2004
====================================================================
This file contains information regarding U-Boot and the Altera
Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios
information see doc/README.nios.
For those interested in contributing ... see HELP WANTED section
in doc/README.nios.
Contents:
1. Files
2. Memory Organization
3. Examples
4. Programming U-Boot into FLASH with GERMS
5. Active Serial Memory Interface (ASMI) Support
====================================================================
1. Files
=========
board/altera/dk1c20/*
include/configs/DK1C20.h
2. Memory Organization
=======================
-The heap is placed below the monitor (U-Boot code).
-Global data is placed below the heap.
-The stack is placed below global data (&grows down).
3. Examples
============
The hello_world example works fine. The default load address
is 0x0100_0000 (the start of SDRAM).
4. Programming U-Boot into FLASH with GERMS
============================================
The current version of the DK-1C20 port with the default
configuration settings occupies about 81 KBytes of flash.
A minimal configuration occupies less than 60 KByte (asmi
and network support disabled).
To program U-Boot into the DK-1C20 flash using GERMS do the
following:
1. From the command line, download U-Boot using the nios-run:
$ nios-run -r u-boot.srec
This takes about 45 seconds (GERMS is not very speedy here).
After u-boot is downloaded it will be executed. You should
see the following:
U-Boot 1.0.0-pre (Oct 4 2003 - 07:39:24)
CPU: Nios-32 Rev. 3.3 (0x3038)
Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
Board: Altera Nios 1C20 Development Kit
In: serial
Out: serial
Err: serial
==>
2. Quit nios-run and start your terminal application (e.g. start
Hyperterminal or minicom).
3. Download the u-boot code to RAM. When using Hyperterminal, do the
following:
a. From the u-boot command prompt start a binary download to SRAM:
==> loadb 800000
b. Download u-boot.bin using kermit.
4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
==> erase 1:4-5
5. Copy the binary image from SRAM to flash:
==> cp.b 800000 40000 10000
U-Boot will now automatically start when the board is powered on or
reset using the Standard-32 configuration. To start U-Boot with the
Safe-32 configuration, enter the following GERMS command:
+ g 40000
5. Active Serial Memory Interface (ASMI) Support
================================================
ASMI is fully supported in U-Boot. Please note that ASMI is supported
only on Cyclone devices. Do not expect ASMI to work with Stratix or
APEX devices.
************* IMPORTANT *************
===================================================
IN ORDER FOR THE NIOS ASMI TO OPERATE PROPERLY, THE
CYCLONE DEVICE MUST BE CONFIGURED USING JTAG OR ASMI.
There are two techniques you can use to bootstrap the ASMI. The
first is to use the program_epcs utility that is part of Altera's SDK.
But I've found program_epcs to be slow and cumbersome at best.
An undocumented alternative is to use the Quartus device programing
interface:
1. Select "Active Serial" mode.
2. Choose the xxx.pof file. For example, for the standard_32
configuration use the "standard_32.pof" file.
3. Attach your ByteBlaster to J28. Make sure you have the
cable attached properly -- the orientation of J28 is
different than J24 (the JTAG header). On J28, pin 1 is on
the bottom row, left-most pin.
4. Press and hold the "Power-On Reset" switch (SW10). You will
see the green "Loading" and red "Error" LEDs (LED3 and LED4)
in the on state.
5. While holding down the "Power-On Reset" switch, start the
programming sequence. This only takes about 10 seconds.
6. After programming is complete, release the "Power-On Reset"
switch. The Cyclone device should now load its configuration
from the EPCS4 (U59). The green "User" LED (LED 1) should be
blinking if the device was successfully loaded via ASMI.
7. Remove the ByteBlaster cable. The cable must be removed to
allow the Nios ASMI access to the EPCS4 device.
After you have successfully programmed a configuration into the
EPCS4, the ASMI will be used to load the Cyclone configuration
unless the "Force Safe" switch (SW9) is pressed.
NOTE: To maximize the amount of space available for program use,
you can enable configuration compression in Quartus. With compression
enabled, the size of the standard_32 configuration data is
approximately 192 KBytes.
To use the U-Boot ASMI commands, try typing "help asmi" at the
command prompt. The command "asmi info" will show the current
status of the ASMI.

366
doc/README.dk1c20_std32
View File

@ -1,366 +0,0 @@
TODO: specify IDE i/f
specify ASMI i/f
specify OCI
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[6]
CPU: "standard_32"
32 bit NIOS for 50 MHz
256 Byte for register file (15 levels)
4 KByte instruction cache (2 bytes in each cache line)
4 KByte data cache (4 bytes in each cache line)
2 KByte On Chip ROM with GERMS boot monitor
no On Chip RAM
MSTEP multiplier
no Debug Core
On Chip Instrumentation (OCI) enabled
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
CONFIG_SYS_NIOS_CPU_ICACHE = 4096
CONFIG_SYS_NIOS_CPU_DCACHE = 4096
CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
OCI: (TODO)
IRQ: Nr. | used by
------+--------------------------------------------------------
16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
45 | ASMI | CONFIG_SYS_NIOS_CPU_ASMI0_IRQ = 45
50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
MEMORY: 8 MByte Flash
1 MByte SRAM
16 MByte SDRAM
ASMI: (TODO) <-- ASMI part is 4M bits
Timer: TIMER0: high priority programmable timer (IRQ16)
TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
PIO1 | LCD: 11 in/outputs for ASCII LCD
PIO2 | LED: 8 outputs for user LEDs
PIO3 | SEVENSEG: 16 outputs for user seven segment display
PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
PIO6 | CFPOWER: 1 output to controll CF power supply
PIO7 | CFATASEL: 1 output to controll CF ATA card select
U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
CONFIG_SYS_NIOS_CPU_LED_PIO = 2
CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ25)
LAN: SMsC LAN91C111 with:
- offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
IDE: (TODO)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
0x02000000 ---32-----------16|15------------0-
| : | \
| : | |
SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
| : | | = 0x01000000
| : | /
0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x________ ---32-----------16|15------------0-
| | | \
: (real size : : |
ASMI i/f : and content : : > 0x________
[5] : unknown) : : |
| | | /
0x00920b00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ASMI0
| |
: gap :
| |
0x00920a80 ---32-----------16|15------------0-
| | | \
: (real size : : |
IDE i/f : and content : : > 0x00000080
[6] : unknown) : : |
| | | /
0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER1 | (unused) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| (unused) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO7 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO6 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO5 | interruptmask (1 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO4 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (rw) | /
0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO3 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (16 bit) (wo) | /
0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO2 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (8 bit) (wo) | /
0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (11 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (11 bit) (rw) | /
0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| edgecapture (4 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | interruptmask (4 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (4 bit) (ro) | /
0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| | \
: gap : > (space for UART1)
| | /
0x00920920 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
0x00920900 -----------------------------------
| | \
: (real size : |
OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
: unknown) : | = 0x00000100
| | /
0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
- - - - - - - - - - - on chip memory - - - - - - - - - - -
0x00920800 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
| : | | = 0x00000800
| : | /
0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
0x00920000 ---32-----------16|15------------0-
| gap | \
0x00910310 --+-------------------------------| |
| | |
| register bank (size = 0x10) | |
| +--------.---.---.--- | |
| | bank 0 \ 1 \ 2 \ 3 \ | |
| |---------------------------+ | |
LAN91C111 | | BANK | RESERVED | | |
| |- - - - - - -|- - - - - - -| | > na_lan91c111_size
| | RPCR | MIR | | | = 0x00010000
| |- - - - - - -|- - - - - - -| | |
| | COUNTER | RCR | | |
| |- - - - - - -|- - - - - - -| | |
| | EPH STATUS | TCR | | |
| +---------------------------+ | |
0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
| gap | /
0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
| |
: gap :
: :
- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00900000 ---32-----------16|15------------0-
0x00900000 --+32-----------16|15------------0+
| : | \ \
| : | | |
| : | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| : | | | = 0x00000100
| : | | /
0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
| : | | \
| : | | |
| : | | > stack area
| : | | |
| : | | V
| : | |
SRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
| : | | = 0x00100000
| : | /
0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
0x00800000 ---8-------------4|3-------------0-
| sector 127 | \
+ 0x7f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 1 : | | = 0x00800000
+ 0x010000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x10000) | /
0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x00800000 ---8-------------4|3-------------0-
| : | \
SAFE | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00700000 --+- - - - - - - -:- - - - - - - -+-
| : | \
USER | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00600000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
WEB pages | : | > 2 MByte
| : | | (provisory usable)
| : | /
0x00400000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
| : | |
| : | > 4 MByte free for use
| : | |
0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
0x00000000 ---8-------------4|3-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
http://www.altera.com/literature/wp/wp_epcs_cyc.pdf
[6] http://www.opencores.org/projects/ata/
http://www.t13.org/index.html
===============================================================================
Stephan Linz <linz@li-pro.net>

131
doc/README.dk1s10
View File

@ -1,131 +0,0 @@
Nios Development Kit
Startix Editions
Last Update: January 28, 2004
====================================================================
This file contains information regarding U-Boot and the Altera
Nios Development Kit, Startix Edition (DK-1S10). For general Nios
information see doc/README.nios.
Most stuff of this file was borrowed and based on README.dk1c20,
the DK-1C20 related information file.
For those interested in contributing ... see HELP WANTED section
in doc/README.nios.
Contents:
1. Files
2. Memory Organization
3. CPU Variations
4. Examples
5. Programming U-Boot into FLASH with GERMS
====================================================================
1. Files
=========
board/altera/dk1s10/*
include/configs/DK1S10.h
2. Memory Organization
=======================
-The heap is placed below the monitor (U-Boot code).
-Global data is placed below the heap.
-The stack is placed below global data (&grows down).
3. CPU Variations
=================
There are more than one NIOS CPU variation for the DK-1S10. U-Boot
supports the following CPU configurations:
- Altera Standard 32 (make DK1S10_standard_32_config)
- Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
4. Examples
============
The hello_world example was never tested on DK-1S10. Neverthelse
it should work as far as possible, because the DK-1S10 port is
more than ninetieth percents equal to the DK-1C20 port and at
this platform the hello_world example was already tested
successfully (see README.dk1c20).
5. Programming U-Boot into FLASH with GERMS
============================================
The current version of the DK-1S10 port with the default
configuration settings occupies about 78 KBytes of flash.
A minimal configuration occupies less than 60 KByte
(network support disabled).
To program U-Boot into the DK-1S10 flash using GERMS do the
following:
1. From the command line, download U-Boot using the nios-run:
$ nios-run -r u-boot.srec
This takes about 45 seconds (GERMS is not very speedy here).
After u-boot is downloaded it will be executed. You should
see the following:
U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
CPU: Nios-32 Rev. 3.3 (0x3038)
Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
Board: Altera Nios 1S10 Development Kit
In: serial
Out: serial
Err: serial
DK1S10 >
2. Quit nios-run and start your terminal application (e.g. start
Hyperterminal or minicom).
3. Download the u-boot code to RAM. When using Hyperterminal, do the
following:
a. From the u-boot command prompt start a binary download to
SRAM / SDRAM:
at the Altera Standard 32 to SRAM:
==> loadb 800000
at the Microtronix LDK 2.0 to SDRAM:
==> loadb 1010000
b. Download u-boot.bin using kermit.
4. From the U-Boot command prompt, erase flash:
at the Altera Standard 32 from 0x40000 to 0x5ffff:
==> erase 1:4-5
at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
==> erase 1:0-1
5. Copy the binary image from SRAM / SDRAM to flash:
at the Altera Standard 32 to SRAM:
==> cp.b 800000 40000 ${filesize}
at the Microtronix LDK 2.0 to SDRAM:
==> cp.b 1010000 8000000 ${filesize}
U-Boot will now automatically start when the board is powered on or
reset using the Standard-32 configuration. To start U-Boot with the
Safe-32 configuration, enter the following GERMS command:
+ g 40000

286
doc/README.dk1s10_mldk20
View File

@ -1,286 +0,0 @@
TODO: specify IDE i/f
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[5]
CPU: "LDK2"
32 bit NIOS for 75 MHz
512 Byte for register file (30 levels)
with out instruction cache
with out data cache
2 KByte On Chip ROM with GERMS boot monitor
with out On Chip RAM
MSTEP multiplier
no Debug Core
no On Chip Instrumentation (OCI)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 75000000
CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
IRQ: Nr. | used by
------+--------------------------------------------------------
16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 20
25 | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 25
MEMORY: 8 MByte Flash
16 MByte SDRAM
Timer: TIMER0: high priority programmable timer (IRQ16)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | CFPOWER: 1 output to controll CF power supply
PIO1 | BUTTON: 4 inputs for user push buttons (no IRQ)
------+--------------------------------------------------------
not | LCD: 11 in/outputs for ASCII LCD
pres.| LED: 8 outputs for user LEDs
| SEVENSEG: 16 outputs for user seven segment display
| RECONF: 1 in/output for . . . . . . . . . . . .
| CFPRESENT: 1 input for CF present event (IRQ35)
| CFATASEL: 1 output to controll CF ATA card select
U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 1
CONFIG_SYS_NIOS_CPU_LCD_PIO = (not present)
CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = (not present)
CONFIG_SYS_NIOS_CPU_RECONF_PIO = (not present)
CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = (not present)
CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 0
CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = (not present)
UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
without handshake RTS/CTS (IRQ17)
UART1: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ18)
LAN: SMsC LAN91C111 with:
- offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
IDE: (TODO)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
0x02000000 --+32-----------16|15------------0+
| . | \ \
| . | | |
| . | | > stack area
| . | | |
| . | | V
| . | |
| . | |
SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
| . | | = 0x01000000
| . | |
0x01000100 |- - - - - - - - - - - - - - - -+-|-
| . | | \
| . | | |
| . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| . | | | = 0x00000100
| | / /
0x01000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
| sector 127 | \
+ 0x7f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 1 : | | = 0x00800000
+ 0x010000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x10000) | /
0x00800000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
| |
: gap :
: :
- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00020000 ---32-----------16|15------------0-
| gap | \
0x00010310 --+-------------------------------| |
| | |
| register bank (size = 0x10) | |
| +--------.---.---.--- | |
| | bank 0 \ 1 \ 2 \ 3 \ | |
| |---------------------------+ | |
LAN91C111 | | BANK | RESERVED | | |
| |- - - - - - -|- - - - - - -| | > na_enet_size
| | RPCR | MIR | | | = 0x00010000
| |- - - - - - -|- - - - - - -| | |
| | COUNTER | RCR | | |
| |- - - - - - -|- - - - - - -| | |
| | EPH STATUS | TCR | | |
| +---------------------------+ | |
0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
| gap | /
0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00000980 ---32-----------16|15------------0-
| | | \
: (real size : : |
IDE i/f : and content : : > 0x00000080
[5] : unknown) : : |
| | | /
0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
| | \
: gap : > (space for PIO4..7)
| | /
0x000008c0 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART1 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
| | \
: gap : > (space for PIO2..3)
| | /
0x00000880 ---32-----------16|15------------0-
| edgecapture (4 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | interruptmask (4 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (4 bit) (ro) | /
0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| | \
: gap : > (space for UART2)
| | /
0x00000820 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
0x00000800 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
| : | | = 0x00000800
| : | /
0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x01000000 ---8-------------4|3-------------0-
| : | \
SAFE | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00f00000 --+- - - - - - - -:- - - - - - - -+-
| : | \
USER | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00e00000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
WEB pages | : | > 2 MByte
| : | | (provisory usable)
| : | /
0x00c00000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
| : | |
| : | > 4 MByte free for use
| : | |
0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
| : | /
0x00800000 |- - - - - - - -:- - - - - - - -+- - u-boot _start()
0x00800000 ---8-------------4|3-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[5] http://www.opencores.org/projects/ata/
http://www.t13.org/index.html
===============================================================================
Stephan Linz <linz@li-pro.net>

354
doc/README.dk1s10_std32
View File

@ -1,354 +0,0 @@
TODO: specify IDE i/f
specify OCI
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[5]
CPU: "standard_32"
32 bit NIOS for 50 MHz
256 Byte for register file (15 levels)
4 KByte instruction cache (4 bytes in each cache line)
4 KByte data cache (4 bytes in each cache line)
2 KByte On Chip ROM with GERMS boot monitor
64 KByte On Chip RAM
MSTEP multiplier
no Debug Core
On Chip Instrumentation (OCI) enabled
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
CONFIG_SYS_NIOS_CPU_ICACHE = 4096
CONFIG_SYS_NIOS_CPU_DCACHE = 4096
CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
OCI: (TODO)
IRQ: Nr. | used by
------+--------------------------------------------------------
16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
MEMORY: 8 MByte Flash
1 MByte SRAM
16 MByte SDRAM
Timer: TIMER0: high priority programmable timer (IRQ16)
TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
PIO1 | LCD: 11 in/outputs for ASCII LCD
PIO2 | LED: 8 outputs for user LEDs
PIO3 | SEVENSEG: 16 outputs for user seven segment display
PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
PIO6 | CFPOWER: 1 output to controll CF power supply
PIO7 | CFATASEL: 1 output to controll CF ATA card select
U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
CONFIG_SYS_NIOS_CPU_LED_PIO = 2
CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ25)
LAN: SMsC LAN91C111 with:
- offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
IDE: (TODO)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
0x02000000 ---32-----------16|15------------0-
| : | \
| : | |
SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
| : | | = 0x01000000
| : | /
0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00920a80 ---32-----------16|15------------0-
| | | \
: (real size : : |
IDE i/f : and content : : > 0x00000080
[5] : unknown) : : |
| | | /
0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER1 | (unused) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| (unused) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO7 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO6 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO5 | interruptmask (1 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO4 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (rw) | /
0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO3 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (16 bit) (wo) | /
0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO2 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (8 bit) (wo) | /
0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (11 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (11 bit) (rw) | /
0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| edgecapture (4 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | interruptmask (4 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (4 bit) (ro) | /
0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| | \
: gap : > (space for UART1)
| | /
0x00920920 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
0x00920900 -----------------------------------
| | \
: (real size : |
OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
: unknown) : | = 0x00000100
| | /
0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
0x00920800 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
| : | | = 0x00000800
| : | /
0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
0x00920000 ---32-----------16|15------------0-
| gap | \
0x00910310 --+-------------------------------| |
| | |
| register bank (size = 0x10) | |
| +--------.---.---.--- | |
| | bank 0 \ 1 \ 2 \ 3 \ | |
| |---------------------------+ | |
LAN91C111 | | BANK | RESERVED | | |
| |- - - - - - -|- - - - - - -| | > na_lan91c111_size
| | RPCR | MIR | | | = 0x00010000
| |- - - - - - -|- - - - - - -| | |
| | COUNTER | RCR | | |
| |- - - - - - -|- - - - - - -| | |
| | EPH STATUS | TCR | | |
| +---------------------------+ | |
0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
| gap | /
0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
0x00910000 ---32-----------16|15------------0-
| : | \
| : | |
onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
| : | | = 0x00010000
| : | /
0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
0x00900000 ---32-----------16|15------------0-
0x00900000 --+32-----------16|15------------0+
| . | \ \
| . | | |
| . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| . | | | = 0x00000100
| . | | /
0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
| . | | \
| . | | |
| . | | > stack area
| . | | |
| . | | V
| . | |
SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
| . | | = 0x00100000
| | /
0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
0x00800000 ---8-------------4|3-------------0-
| sector 127 | \
+ 0x7f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 1 : | | = 0x00800000
+ 0x010000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x10000) | /
0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x00800000 ---8-------------4|3-------------0-
| : | \
SAFE | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00700000 --+- - - - - - - -:- - - - - - - -+-
| : | \
USER | : | > 1 MByte
FPGA conf. | : | / (NOT usable by software)
0x00600000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
WEB pages | : | > 2 MByte
| : | | (provisory usable)
| : | /
0x00400000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
| : | |
| : | > 4 MByte free for use
| : | |
0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
0x00000000 ---8-------------4|3-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[5] http://www.opencores.org/projects/ata/
http://www.t13.org/index.html
===============================================================================
Stephan Linz <linz@li-pro.net>

355
doc/README.dk1s40_std32
View File

@ -1,355 +0,0 @@
TODO: specify IDE i/f
specify OCI
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[5]
CPU: "standard_32"
32 bit NIOS for 50 MHz
256 Byte for register file (15 levels)
4 KByte instruction cache (4 bytes in each cache line)
4 KByte data cache (4 bytes in each cache line)
2 KByte On Chip ROM with GERMS boot monitor
64 KByte On Chip RAM
MSTEP multiplier
no Debug Core
On Chip Instrumentation (OCI) enabled
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
CONFIG_SYS_NIOS_CPU_ICACHE = 4096
CONFIG_SYS_NIOS_CPU_DCACHE = 4096
CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
OCI: (TODO)
IRQ: Nr. | used by
------+--------------------------------------------------------
16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
MEMORY: 8 MByte Flash
1 MByte SRAM
16 MByte SDRAM
Timer: TIMER0: high priority programmable timer (IRQ16)
TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
PIO1 | LCD: 11 in/outputs for ASCII LCD
PIO2 | LED: 8 outputs for user LEDs
PIO3 | SEVENSEG: 16 outputs for user seven segment display
PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
PIO6 | CFPOWER: 1 output to controll CF power supply
PIO7 | CFATASEL: 1 output to controll CF ATA card select
U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
CONFIG_SYS_NIOS_CPU_LED_PIO = 2
CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ25)
LAN: SMsC LAN91C111 with:
- offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
IDE: (TODO)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
0x02000000 ---32-----------16|15------------0-
| : | \
| : | |
SDRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
| : | | = 0x01000000
| : | /
0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00920a80 ---32-----------16|15------------0-
| | | \
: (real size : : |
IDE i/f : and content : : > 0x00000080
[5] : unknown) : : |
| | | /
0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER1 | (unused) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| (unused) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO7 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO6 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (wo) | /
0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
| edgecapture (1 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO5 | interruptmask (1 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (ro) | /
0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO4 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (1 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (1 bit) (rw) | /
0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO3 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (16 bit) (wo) | /
0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO2 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (8 bit) (wo) | /
0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (11 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (11 bit) (rw) | /
0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| edgecapture (4 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | interruptmask (4 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (4 bit) (ro) | /
0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| | \
: gap : > (space for UART1)
| | /
0x00920920 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
0x00920900 -----------------------------------
| | \
: (real size : |
OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
: unknown) : | = 0x00000100
| | /
0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
0x00920800 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
| : | | = 0x00000800
| : | /
0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
0x00920000 ---32-----------16|15------------0-
| gap | \
0x00910310 --+-------------------------------| |
| | |
| register bank (size = 0x10) | |
| +--------.---.---.--- | |
| | bank 0 \ 1 \ 2 \ 3 \ | |
| |---------------------------+ | |
LAN91C111 | | BANK | RESERVED | | |
| |- - - - - - -|- - - - - - -| | > na_lan91c111_size
| | RPCR | MIR | | | = 0x00010000
| |- - - - - - -|- - - - - - -| | |
| | COUNTER | RCR | | |
| |- - - - - - -|- - - - - - -| | |
| | EPH STATUS | TCR | | |
| +---------------------------+ | |
0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
| gap | /
0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
0x00910000 ---32-----------16|15------------0-
| : | \
| : | |
onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
| : | | = 0x00010000
| : | /
0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
0x00900000 ---32-----------16|15------------0-
0x00900000 --+32-----------16|15------------0+
| . | \ \
| . | | |
| . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| . | | | = 0x00000100
| . | | /
0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
| . | | \
| . | | |
| . | | > stack area
| . | | |
| . | | V
| . | |
SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
| . | | = 0x00100000
| | /
0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
0x00800000 ---8-------------4|3-------------0-
| sector 127 | \
+ 0x7f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 1 : | | = 0x00800000
+ 0x010000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x10000) | /
0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x00800000 ---8-------------4|3-------------0-
| : | \
| : | |
SAFE | : | > 2 MByte
FPGA conf. | : | | (NOT usable by software)
| : | /
0x00600000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
USER | : | > 2 MByte
FPGA conf. | : | | (NOT usable by software)
| : | /
0x00400000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
WEB pages | : | > 2 MByte
| : | | (provisory usable)
| : | /
0x00200000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
| : | > 2 MByte free for use
0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
0x00000000 ---8-------------4|3-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[5] http://www.opencores.org/projects/ata/
http://www.t13.org/index.html
===============================================================================
Stephan Linz <linz@li-pro.net>

242
doc/README.dk20k200_std32
View File

@ -1,242 +0,0 @@
===============================================================================
C P U , M E M O R Y , I N / O U T C O M P O N E N T S
===============================================================================
see also [1]-[4]
CPU: "standard_32"
32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000)
256 Byte for register file (15 levels)
no instruction cache
no data cache
1 KByte On Chip ROM with GERMS boot monitor
no On Chip RAM
MSTEP multiplier
no Debug Core
no On Chip Instrumentation (OCI) enabled
U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
CONFIG_SYS_NIOS_CPU_ICACHE = 0
CONFIG_SYS_NIOS_CPU_DCACHE = 0
CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
CONFIG_SYS_NIOS_CPU_MUL = 0
CONFIG_SYS_NIOS_CPU_MSTEP = 1
CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
IRQ: Nr. | used by
------+--------------------------------------------------------
25 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
26 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 26
27 | PIO2 | CONFIG_SYS_NIOS_CPU_PIO2_IRQ = 27
28 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 28 (debug)
MEMORY: 1 MByte Flash
256 KByte SRAM
(SDRAM with standard SODIMM only)
Timer: TIMER0: high priority programmable timer (IRQ25)
U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
PIO: Nr. | description
------+--------------------------------------------------------
PIO0 | SEVENSEG: 16 outputs for user seven segment display
PIO1 | LED: 8 outputs for user LEDs
PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27)
PIO3 | LCD: 11 in/outputs for ASCII LCD
U-Boot CFG: CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 0
CONFIG_SYS_NIOS_CPU_LED_PIO = 1
CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 2
CONFIG_SYS_NIOS_CPU_LCD_PIO = 3
UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
without handshake RTS/CTS (IRQ26)
UART1: fixed baudrate of 115200, fixed protocol 8N1,
without handshake RTS/CTS (IRQ28)
===============================================================================
M E M O R Y M A P
===============================================================================
- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
0x00200000 ---15------------8|7-------------0-
| sector 18 | \
+ 0x0f0000 |- - - - - - - - - - - - - - - -| |
| : | |
Flash |- - - - : - - - -| |
| sector 5 : | |
+ 0x020000 |- - - - - - - - -| |
| sector 4 (size = 0x10000) | |
+ 0x010000 |- - - - - - - - - - - - - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
| sector 3 (size = 0x08000) | | = 0x00100000
+ 0x008000 |- - - - - - - - - - - - - - - -| |
| sector 2 (size = 0x02000) | |
+ 0x006000 |- - - - - - - - - - - - - - - -| |
| sector 1 (size = 0x02000) | |
+ 0x004000 |- - - - - - - - - - - - - - - -| |
| sector 0 (size = 0x04000) | /
0x00100000 ---15------------8|7-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
| |
: gap :
| |
0x00080000 ---32-----------16|15------------0-
0x00080000 --+32-----------16|15------------0+
| . | \ \
| . | | |
| . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
| . | | | = 0x00000100
| . | | /
0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
| . | | \
| . | | |
| . | | > stack area
| . | | |
| . | | V
| . | |
SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
| . | | = 0x00040000
| | /
0x00040000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
| |
: gap :
: :
- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
: :
: gap :
| |
0x00000400 ---32-----------16|15------------0-
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART1 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x000004c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
| |
: gap :
| |
0x00000490 ---32-----------16|15------------0-
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO3 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (11 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (11 bit) (rw) | /
0x00000480 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
| edgecapture (12 bit) (rw) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO2 | interruptmask (12 bit) (rw) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (12 bit) (ro) | /
0x00000470 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO1 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| direction (2 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (2 bit) (rw) | /
0x00000460 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| snaph (16 bit) (rw) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
TIMER0 | snapl (16 bit) (rw) | |
[3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
| periodh (16 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| periodl (16 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| control (4 bit) (rw) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| status (2 bit) (rw) | /
0x00000440 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
| (unused) | \
+ 0x0c |- - - - - - - - - - - - - - - -| |
PIO0 | (unused) | |
[4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
| (unused) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| data (16 bit) (wo) | /
0x00000420 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
| (unused) | \
+ 0x1c |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x18 |- - - - - - - - - - - - - - - -| |
| (unused) | |
+ 0x14 |- - - - - - - - - - - - - - - -| |
UART0 | (unused) | > 0x00000020
[2] + 0x10 |- - - - - - - - - - - - - - - -| |
| control (10 bit) (rw) | |
+ 0x0c |- - - - - - - - - - - - - - - -| |
| status (10 bit) (rw) | |
+ 0x08 |- - - - - - - - - - - - - - - -| |
| txdata (8 bit) (wo) | |
+ 0x04 |- - - - - - - - - - - - - - - -| |
| rxdata (8 bit) (ro) | /
0x00000400 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
- - - - - - - - - - - on chip memory - - - - - - - - - - -
0x00000400 ---32-----------16|15------------0-
| : | \
| : | |
GERMS | : | > na_boot_monitor_rom_size
| : | | = 0x00000400
| : | /
0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address
0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom
===============================================================================
F L A S H M E M O R Y A L L O C A T I O N
===============================================================================
0x00200000 ---15------------8|7-------------0-
| : | \
SAFE | : | > 256 KByte
FPGA conf. | : | / (NOT usable by software)
0x001c0000 --+- - - - - - - -:- - - - - - - -+-
| : | \
USER | : | > 256 KByte
FPGA conf. | : | / (NOT usable by software)
0x00180000 --+- - - - - - - -:- - - - - - - -+-
| : | \
| : | |
| : | > 512 KByte free for use
0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
| : | /
0x00100000 ---15------------8|7-------------0-
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
===============================================================================
Stephan Linz <linz@li-pro.net>

366
doc/README.nios
View File

@ -1,366 +0,0 @@
U-Boot for Nios-32
Last Update: February 1, 2004
====================================================================
This file contains information regarding U-Boot and the Altera
Nios CPU. For information regarding U-Boot and the Nios Development
Kits see:
* Cyclone Edition (DK-1C20), see doc/README.dk1c20
* Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
* Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
* Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
For informations regarding Nios Development Kit hardware overview
and the NIOS CPU standard configuration of all known boards made by
Altera see:
* Development Kit (DK) hardware overview, see doc/README.nios_DK
* NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
* NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
* NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
* NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
For those interested in contributing ... see HELP WANTED below.
1. OVERVIEW
------------
U-Boot has been successfully tested on the Nios Cyclone development
board using both the 'safe' and 'standard 32' configurations with
Nios CPU revision 3.1 (CPU_ID = 0x3018). U-Boot can be used with
or without the GERMS monitor. The initial version of U-Boot for the
Cyclone development kit is about 60 Kbyte and will fit in a single
sector of on-board FLASH. Only the Nios 32-bit CPU is supported.
1.1 GERMS Monitor
------------------
If GERMS is just not enough, then U-Boot is a great antibiotic.
You will be very pleased with its high degree of configurability
and its rich feature set.
A few of the most obvious limitations of GERMS are overcome by
using U-Boot (See 'Brain Damage'). Most notably, you can use
minicom or Hyperterminal (duh).
1.2 Altera Source Code
-----------------------
The Nios port does NOT include ANY sources that Altera has the
copyright. This was a conscious decision ... not an accident.
The Altera license is not clear in terms of distributing Altera
sources (when altera silicon is not involved). This isn't really
a problem as little, if any, of the Altera source contains
features that are not already available in U-Boot.
1.3 Debugging via OCI
---------------------
The Nios port supports debugging with gdb and/or nios-console
via the JTAG port. Stubs for debugging with gdb via the serial
port are not currently implemented.
2. CONFIGURATION OPTIONS/SETTINGS
----------------------------------
2.1 Nios-specific Options/Settings
-----------------------------------
All configuration options/settings that are specific to Nios begin
with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
The configuration follows a two-stage process. In the first stage
the NIOS CPU core will defined like defined in Alteras SOPC Builder.
At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
more informations about all the definitions you have to setup see
into current board configurations and doc/README.nios_CFG_NIOS_CPU.
In second stage we bring the NIOS CPU configuration in relation to
U-Boot configuration options/settings. The following is a list of
currently defined Nios-specific options/parameters used inside of
U-Boot. If any options are related to Standard-32 Nios SDK
excalibur.h definitions, the related definition follows the
description).
CONFIG_NIOS -- defined for all Nios-32 boards.
CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
stdio port. To enable a console via JTAG, define
CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
of the JTAG stdio port (normally OCI base + 0x00fa). Then
run nios-console with the -w option.
(standard-32: nasys_uart_0 resp. na_uart1_base).
CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
parameter is set to '1'.
CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
MSTEP instruction (not yet implemented).
CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
(standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
the timer. (standard-32: nasys_timer_1_irq resp.
na_low_priority_timer2_irq).
CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
no fixed period.
CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
(standard-32: na_asmi_base).
CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
(nasys_spi_0)
CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
This value can be 8 or 16 only! (PTF: databits)
2.2 Differences in U-Boot Options/Settings
-------------------------------------------
Some 'standard' U-Boot options/settings are treated differently in
the Nios port. These are described below.
CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
global data structure in the Nios memory space. More simply,
the address of global data.
3. ASSEMBLY CODING
-------------------
In browsing the assembly source files, you may notice the absence
of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is
deliberate. The documentation for the magic macros is scant and
it is hard to find ... it does not appear in the Nios programmer's
manual, nor does it appear in the assembler manual. Regardless,
the macros actually do very little to improve readability anyway.
With this in mind, all assembler modules use only instructions that
appear in the Nios programmer's manual OR are directly supported
by the nios-elf toolchain. For example, the 'dec %rB' instruction
is an alias for 'subi %rB,1' that is supported by the assembler
but does not appear in the programmer's manual.
4. BOOT PROCESS
---------------
4.1 Boot process over GERMS
---------------------------
When the NIOS CPU catch a reset signal it will begin to be running
code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
find the GERMS monitor. That's the case for the generic NIOS CPU
configuration "standard_32". When the GERMS monitor starts running,
it performs important system initializations and then looks for
executable code in flash, using the following steps:
1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
3. If the button is not pressed and the two bytes contain 'N'
and 'i', the monitor executes a CALL to location
CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
4. If the code is not executed in step 3 or the code returns,
then prints an 8-digit version number to STDOUT and waits for
user commands from STDIN.
In normal case, for "standard_32", STDIN and STDOUT are the first
serial port.
4.2 Return to GERMS command line
--------------------------------
During the boot process, the GERMS monitor checks for the existence
of application software in flash memory. If found, the processor
immediately executes the code. To return program execution to the
GERMS monitor (that is, avoid running code stored in flash memory):
1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
2. Press then release the CPU reset button.
3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
5. DEBUGGING WITH GDB
---------------------
Debug sessions using gdb are currently supported only via JTAG. The
stubs for debugging via a serial port are not implemented. To enable
the gdb JTAG stubs, simply reference _brkpt_hw_int and _brkpt_sw_int
at vector table offsets 3 and 4, respectively. For an example, see
board/altera/dk1c20/vectors.S.
5.1 Vector Table Initialization and ROM Stubs
---------------------------------------------
If CONFIG_ROM_STUBS is defined, the debug breakpoint and single step
entries in the vector table are restored to their initial values
immediately _after_ initializing the vector table. Defining this macro
is useful when ROM-based stubs are implemented.
NOTE: The default GERMS monitor does NOT implement gdb stubs, nor does
it initialize the vector table. Therefore, when debugging U-Boot, you
should NOT set a software breakpoint prior to vector table initialization.
5.2 Starting a Debug Session
----------------------------
If you're not familiar with gdb, you follow these step-by-step instructions.
These instructions are NOT the only way to start a debug session, but they
cover most of the individual functions to get you started.
1. Start the JTAG gdb server. Open a Nios shell window and start
the server. When the server is started you must provide the base
address of the OCI core. For example, when using the Cyclone
development kit (DK1C20):
$ nios-gdb-server --ocibase=0x00920800 --tcpport=2342
2. Start gdb. Open a Nios shell window, change to the top-level
U-Boot directory and start gdb, specifying the u-boot elf file:
$ nios-elf-gdb u-boot
3. Update target settings. From the file menu, select
"Target Settings ..." and select the following, then click 'Ok':
Target: Remote/TCP
Port : 2342 (same as in step 1)
Display download dialog: checked
All other check boxes: unchecked
4. Connect to the target. Select menu: 'Run->Connect to target'.
You should see a dialog box indicating the you successfully connected
to the target.
5. Download U-Boot. Select menu: 'Run->Download'.
6. Open a gdb console window and set the source directory paths.
Select menu: 'View->Console'. In the console window, enter the
following commands, then close the console window:
(gdb) directory common
(gdb) directory arch/nios/cpu
(gdb) directory arch/nios/lib
(gdb) directory board/altera/dk1c20
Note that the last command is for the DK1C20 board only. If you
are using another board, specify that board's directory.
7. Open the file board.c (using the file menu in the lower
left hand corner). Scroll to the board_init() routine and set
a breakpoint.
8. Run U-Boot. Just click on the run icon, or select menu:
'Run->Run'. U-Boot should start running, then break at your
breakpoint.
9. Have fun & start learning more about gdb.
5.3 For advanced Users
----------------------
A few notes for those more familiar with gdb.
-Serial port stubs are not implemented. Sorry, but it's just not
worth _my_ effort. The JTAG stubs work great and are ridiculously
simple to implement.
-If you need to debug the early startup code (prior to the vector
table initialization), use the nios-console debugger.
- Connect, download & run -- there are some problems here. Connect
download and run seperately to avoid trouble.
6. BRAIN DAMAGE
----------------
This section describes some of the unfortunate and avoidable aspects
of working with the Nios CPU ... and some things you can do to
reduce your pain.
6.1 GERMS doesn't work with Hyperterminal
------------------------------------------
GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
sad design decision is remedied by using U-Boot.
6.2 cygwin Incompatibility
---------------------------
The version of cygwin distributed with the nios GNUPro toolchain is
out-of-date and incompatible with the latest cygwin distributions.
In addition, many of the standard utilities are very dated as well.
If you try to download and build the lastest version of grep for
example, you'll quickly realize that a native gcc is not available
(the next topic) which leads to U-Boot build problems (following
topic).
The solution ... well, you can wait for Altera ... or build as
set of tools for linux.
6.3 No native gcc
------------------
I'm not sure how this one slipped through the cracks ... but it is
a real pain. Basically, if you want to build anything for the native
environment -- forget it! A native (cygwin) gcc is not distributed,
and the old version of cygwin makes locating one challenging.
The solution ... same as above. Just download the gcc source from
Altera and build up a set of cross tools for your favorite linux
distro. Anybody who wants to use an already precompiled NIOS cross
toolchain can it found in the CDK4NIOS project hosted by Source
Forge at http://cdk4nios.sourceforge.net.
6.4 Can't build default U-Boot
-------------------------------
By default, when you build U-Boot you will be building some native
tools along with the target elf, bin, and srec files. Without a
native gcc, this (obviously) causes problems.
For developers using the Altera cygwin tools you can remove the
'tools' directory from SUBDIRS in the top-level Makefile. You will
also have to edit common/Makefile:
Replace:
env_embedded.o: env_embedded.c ../tools/envcrc
$(CC) $(AFLAGS) -Wa,--no-warn \
-DENV_CRC=$(shell ../tools/envcrc) \
-c -o $@ env_embedded.c
With:
env_embedded.o: env_embedded.c
$(CC) $(AFLAGS) -Wa,--no-warn \
-DENV_CRC=0 \
-c -o $@ env_embedded.c
BTW, thats a 'zero' ... not the letter 'O'. And not that the
"../tools/envcrc" dependency is removed.
7. HELP WANTED
---------------
There are plenty of areas where help is needed. Here's are some ideas
for those interested in contributing:
-CompactFlash. Port & test CF/FAT.
-Bedbug. Develop bedbug for Nios ... or at least provide a disassemble
command.
-Add boot support for ucLinux (niosnommu).
-Implement (don't copy Altera code) the __mulxx routines using the
MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
Regards,
--Scott
<smcnutt@psyent.com>
--Stephan
<linz@li-pro.net>

140
doc/README.nios_CONFIG_SYS_NIOS_CPU
View File

@ -1,140 +0,0 @@
===============================================================================
C F G _ N I O S _ C P U _ * v s . N I O S S D K
===============================================================================
When ever you have to make a new NIOS CPU configuration you can use this table
as a reference list to the original NIOS SDK symbols made by Alteras SOPC
Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
C O R E N I O S S D K [1],[7]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_CLK nasys_clock_freq
CONFIG_SYS_NIOS_CPU_ICACHE nasys_icache_size
CONFIG_SYS_NIOS_CPU_DCACHE nasys_dcache_size
CONFIG_SYS_NIOS_CPU_REG_NUMS nasys_nios_num_regs
CONFIG_SYS_NIOS_CPU_MUL __nios_use_multiply__
CONFIG_SYS_NIOS_CPU_MSTEP __nios_use_mstep__
CONFIG_SYS_NIOS_CPU_STACK nasys_stack_top
CONFIG_SYS_NIOS_CPU_VEC_BASE nasys_vector_table
CONFIG_SYS_NIOS_CPU_VEC_SIZE nasys_vector_table_size
CONFIG_SYS_NIOS_CPU_VEC_NUMS
CONFIG_SYS_NIOS_CPU_RST_VECT nasys_reset_address
CONFIG_SYS_NIOS_CPU_DBG_CORE nasys_debug_core
CONFIG_SYS_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes
CONFIG_SYS_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size
CONFIG_SYS_NIOS_CPU_ROM_BASE na_boot_monitor_rom
CONFIG_SYS_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size
CONFIG_SYS_NIOS_CPU_OCI_BASE nasys_oci_core
CONFIG_SYS_NIOS_CPU_OCI_SIZE
CONFIG_SYS_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem
nasys_data_mem
CONFIG_SYS_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size
nasys_data_mem_size
CONFIG_SYS_NIOS_CPU_SDRAM_BASE na_sdram
CONFIG_SYS_NIOS_CPU_SDRAM_SIZE na_sdram_size
CONFIG_SYS_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash
nasys_am29lv065d_flash_0
nasys_flash_0
CONFIG_SYS_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size
T I M E R N I O S S D K [3]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_TIMER_NUMS nasys_timer_count
CONFIG_SYS_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9]
CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq
CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER [ptf]:period
[ptf]:period_units
[ptf]:mult
CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run
CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period
CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot
U A R T N I O S S D K [2]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_UART_NUMS nasys_uart_count
CONFIG_SYS_NIOS_CPU_UART[0-9] nasys_uart_[0-9]
CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq
CONFIG_SYS_NIOS_CPU_UART[0-9]_BR [ptf]:baud
CONFIG_SYS_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits
CONFIG_SYS_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits
CONFIG_SYS_NIOS_CPU_UART[0-9]_PA [ptf]:parity
CONFIG_SYS_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts
CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register
P I O N I O S S D K [4]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_PIO_NUMS nasys_pio_count
CONFIG_SYS_NIOS_CPU_PIO[0-9] nasys_pio_[0-9]
CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq
CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width
CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri
[ptf]:has_out
[ptf]:has_in
CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture
CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type
CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type
S P I N I O S S D K [6]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_SPI_NUMS nasys_spi_count
CONFIG_SYS_NIOS_CPU_SPI[0-9] nasys_spi_[0-9]
CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq
CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits
CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster
CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves
CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock
CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay
CONFIG_SYS_NIOS_CPU_SPI[0-9]_* [ptf]:*
I D E N I O S S D K
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_IDE_NUMS nasys_usersocket_count
CONFIG_SYS_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9]
A S M I N I O S S D K [5]
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_ASMI_NUMS nasys_asmi_count
CONFIG_SYS_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9]
CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq
E t h e r n e t ( L A N ) N I O S S D K
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_LAN_NUMS
CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE na_lan91c111
CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET
CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq
CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH
CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
s y s t e m c o m p o s i n g N I O S S D K
-------------------------------------------------------------------------------
CONFIG_SYS_NIOS_CPU_TICK_TIMER (na_low_priority_timer2)
CONFIG_SYS_NIOS_CPU_USER_TIMER (na_timer1)
CONFIG_SYS_NIOS_CPU_BUTTON_PIO (na_button_pio)
CONFIG_SYS_NIOS_CPU_LCD_PIO (na_lcd_pio)
CONFIG_SYS_NIOS_CPU_LED_PIO (na_led_pio)
CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio)
CONFIG_SYS_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio)
CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio)
CONFIG_SYS_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio)
CONFIG_SYS_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio)
CONFIG_SYS_NIOS_CPU_USER_SPI (na_spi)
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf
[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf
[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
===============================================================================
Stephan Linz <linz@li-pro.net>

192
doc/README.nios_DK
View File

@ -1,192 +0,0 @@
===============================================================================
H A R D W A R E O V E R V I E W
===============================================================================
===============|===============|===============|===============|===============
| DK20K200 | DK1C20 | DK1S10 | DK1S40
---------------|---------------|---------------|---------------|---------------
| | | |
Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00
Rev. | pilot. | 01 | 01 | 00
Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14
[1] | | | |
===============|===============|===============|===============|===============
| | | |
FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix"
| EP20K200E | EP1C20 | EP1S10 | EP1S40
| | |
| (484 FBGA) | (400 FBGA) | (780 FBGA)
[2],[3],[4] | | |
---------------|---------------|---------------|---------------|---------------
| |
Clock (OSC) | 33.333 MHz | 50 MHz
| | (with ext. supply)
|
| PI49FCT3805
[5] |
---------------|---------------|---------------|---------------|---------------
| |
Flash | 1 MByte | 8 MByte
| |
| AM29LV800BB | AM29LV065DU120REI
| 8/16 bit bus | 8 bit bus
| 1 chip | 1 chip
[6],[7] | |
---------------|---------------|---------------|---------------|---------------
| | |
serial | no such | 4 MBits | no such
Flash | | |
| | EPCS4SI8 |
[8] | | |
---------------|---------------|---------------|---------------|---------------
| |
Compact | no such, as | see below: prototype adapter
Flash (CF) | module only |
| |
---------------|---------------|---------------|---------------|---------------
| |
SRAM | 256 KByte | 1 MByte
| |
| IDT71V016S | IDT71V416S10PH
| 32 bit bus | 32 bit bus
| 2 chips | 2 chips
| interlaced | interlaced
[9],[10] | |
---------------|---------------|---------------|---------------|---------------
| |
SDRAM | SODIMM only | 16 MByte
| |
| | MT48LC4M32B2TG-7
| 64 bit bus | 32 bit bus
| | 1 chip
[11] | |
===============|===============|===============|===============|===============
| |
serial I/O | 1 RS232 | 2 RS232
| |
| LTC1386 | MAX3237CAI
| |
| port 1: | port 1:
| RxD / TxD, | RxD / TxD,
| RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI
| |
| ! ! ! ! ! ! | port 2: | port 2:
| RTS/CTS can | RxD / TxD | RxD / TxD
| be RxD/TxD | | RTS / CTS, DTR / DSR
| of 2nd port | | DCD, RI
[12],[13] | ! ! ! ! ! ! | |
---------------|---------------|---------------|---------------|---------------
| |
Ethernet | no such, as | 1 10BaseT / 100BaseT
| module only |
| | LAN91C111-NE
| | 32 bit bus
| | no external EEPROM
| | LEDA# for link
| | LEDB# for Rx / Tx
[14] | |
===============|===============|===============|===============|===============
| |
user | 8 | no such
switches | SW[7..0] |
| |
---------------|---------------|---------------|---------------|---------------
|
user push | 4
buttons | PB[3..0]
|
---------------|---------------|---------------|---------------|---------------
| |
user LEDs | 2 | 8
| LED[1..0] | LED[7..0]
| |
---------------|---------------|---------------|---------------|---------------
|
user seven | 2
segment | HEX[1..0][G..A,DP]
|
===============|===============|===============|===============|===============
| |
3.3V proto- | w/o level | no such -- only 5V
type adapter | shift buffer |
| |
| 40 I/O pins |
| 1 card sel. |
| 1 reset out. |
| 1 OSC clock |
| 1 CPU clock |
| 1 clock out. |
| |
---------------|---------------|---------------|---------------|---------------
| |
5V prototype | with level | 2 ports -- both card ports supplied with its
adapter | shift buffer | own level shift buffer
| |
| 40 I/O pins | port 1 & 2:
| 1 card sel. | 41 I/O pins
| 1 Vee ? ? ? | 1 card select
| 1 reset out. | 1 reset output (from dev/board)
| 1 OSC clock | 1 OSC clock (from dev/board)
| 1 CPU clock | 1 CPU clock (from dev/board)
| 1 clock inp. | 1 clock input (to dev/board)
| |
| | (special) port 1:
| | 1 CF select
| | 1 CF present
| | 1 CF ATA select
| | 1 CF power
| |
| | NOTE: Both card ports are prepared for raw
| | IDE working. You can connect such
| | devices directly to the 40 pin header.
| | The signal PDIAG (passed diagnostic)
| | is not connected to any I/O signal.
| | Card port 1 is hard wired to the on
| | board Copact Flash adapter together
| | with all other signals needed by CF
| | cards. Hot plug should be working too.
[15],[16] | |
===============|===============|===============|===============|===============
| |
config. CPLD | EPM7064 | EPM7128
| |
(alternative | decition by | decision by
FPGA conf.) | jumper | push button
| |
| FPGA config. | FPGA config. | FPGA config.
| from Flash | from Flash | from Flash
| only | and EPCS4 | only
| | |
===============|===============|===============|===============|===============
===============================================================================
===============================================================================
R E F E R E N C E S
===============================================================================
[1] http://www.altera.com/literature/lit-nio.jsp
[2] http://www.altera.com/literature/lit-apx.jsp
[3] http://www.altera.com/literature/lit-cyc.jsp
[4] http://www.altera.com/literature/lit-stx.jsp
[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf
http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805
[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf
[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf
[8] http://www.altera.com/literature/lit-config.html
http://preview.altera.com/literature/ds/micron.pdf
[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html
[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html
[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7
[12] http://www.linear.com/prod/datasheet.html?datasheet=33
http://www.linear.com/pdf/1386fa.pdf
[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en
http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf
[14] http://www.smsc.com/main/catalog/lan91c111.html
[15] http://www.t13.org/index.html
[16] http://www.compactflash.org/faqs/faq.htm
===============================================================================
Stephan Linz <linz@li-pro.net>

3
doc/uImage.FIT/source_file_format.txt
View File

@ -173,8 +173,7 @@ the '/images' node should have the following layout:
- arch : Architecture name, mandatory for types: "standalone", "kernel",
"firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha",
"arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
"sparc64", "m68k", "nios", "microblaze", "nios2", "blackfin", "avr32",
"st200".
"sparc64", "m68k", "microblaze", "nios2", "blackfin", "avr32", "st200".
- entry : entry point address, address size is determined by
'#address-cells' property of the root node. Mandatory for for types:
"standalone" and "kernel".

17
examples/standalone/stubs.c
View File

@ -65,23 +65,6 @@ gd_t *global_data;
" lw $25, %1($25)\n" \
" jr $25\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9");
#elif defined(CONFIG_NIOS)
/*
* %g7 holds the pointer to the global_data. %g0 is call clobbered.
*/
#define EXPORT_FUNC(x) \
asm volatile ( \
" .globl " #x "\n" \
#x ":\n" \
" pfx %%hi(%0)\n" \
" movi %%g0, %%lo(%0)\n" \
" add %%g0, %%g7\n" \
" ld %%g0, [%%g0]\n" \
" pfx %1\n" \
" ld %%g0, [%%g0]\n" \
" jmp %%g0\n" \
" nop \n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
#elif defined(CONFIG_NIOS2)
/*
* gp holds the pointer to the global_data, r8 is call-clobbered

3
fs/fat/fat.c
View File

@ -708,9 +708,6 @@ long
do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
int dols)
{
#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */
static
#endif
char fnamecopy[2048];
boot_sector bs;
volume_info volinfo;

689
include/configs/ADNPESC1.h
View File

@ -1,689 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/***********************************************************************
* Include the whole NIOS CPU configuration.
*
* !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
***********************************************************************/
#if defined(CONFIG_NIOS_BASE_32)
#include <configs/ADNPESC1_base_32.h>
#else
#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
#endif
/*------------------------------------------------------------------------
* BOARD/CPU -- TOP-LEVEL
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
* BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
#else
#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
#else
#undef CONFIG_SYS_SRAM_BASE
#undef CONFIG_SYS_SRAM_SIZE
#endif
#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
* much anywhere. This is pretty flexible for Nios. So here we make some
* arbitrary choices & assume that the monitor is placed at the end of
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately -- this is very important if you plan to move your
* memory to another place as configured at this time !!!).
*
* -The heap is placed below the monitor.
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */
#else
#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
/* Mem addr of environment */
#if defined(CONFIG_NIOS_BASE_32)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#else
#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
#endif
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
#endif
/*------------------------------------------------------------------------
* NIOS APPLICATION CODE BASE AREA
*----------------------------------------------------------------------*/
#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff"
#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000"
#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff"
#else
#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
#endif
#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios"
/*------------------------------------------------------------------------
* BOOT ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; "
#else
#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
#endif
#define CONFIG_BOOTDELAY 5
#define CONFIG_BOOTCOMMAND \
"if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
"then " \
"wd off; " \
CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \
"go $appl_entry_addr; " \
"else " \
CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \
"echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
"echo *** invalid application at $appl_entry_addr; " \
"echo *** stop bootup...; " \
"fi"
/*------------------------------------------------------------------------
* EXTRA ENVIRONMENT
*----------------------------------------------------------------------*/
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
#else
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"update_allowed=0\0" \
"update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
"appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \
"appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \
"appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \
"appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \
"appl_name=ADNPESC1/base32/linux.bin\0" \
"appl_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $appl_name; " \
"protect off $appl_entry_addr $appl_end_addr; " \
"era $appl_entry_addr $appl_end_addr; " \
"cp.b $update_load_addr $appl_entry_addr $filesize; "\
CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
"fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \
"fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \
"fs_name=ADNPESC1/base32/romfs.img\0" \
"fs_update=" \
"if itest.b $update_allowed != 0; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $fs_name; " \
"protect off $fs_base_addr $fs_end_addr; " \
"era $fs_base_addr $fs_end_addr; " \
"cp.b $update_load_addr $fs_base_addr $filesize; "\
CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
"else " \
"echo *** update not allowed (update_allowed=$update_allowed); "\
"fi\0" \
"uboot_name=ADNPESC1/base32/u-boot.bin\0" \
"uboot_loadnrun=" \
"if ping $serverip; " \
"then " \
CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
"tftp $update_load_addr $uboot_name; " \
"wd off; " \
"go $update_load_addr; " \
"else " \
"echo *** missing connection to $serverip; " \
"echo *** check your network and try again...; "\
"fi\0"
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
#else
#undef CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* WATCHDOG (or better MAX823 supervisory circuite access)
*----------------------------------------------------------------------*/
#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
#ifdef CONFIG_HW_WATCHDOG
/* MAX823 supervisor -- watchdog enable port at: */
#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
#endif
/* MAX823 supervisor -- watchdog trigger port at: */
#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
#endif
#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
#else
#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
#endif
#endif /* CONFIG_HW_WATCHDOG */
/*------------------------------------------------------------------------
* SERIAL PERIPHAREL INTERFACE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_NIOS_SPI 1 /* SPI support active */
#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0
#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS
#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */
#else
#undef CONFIG_NIOS_SPI /* NO SPI support */
#endif
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#define CONFIG_SMC_USE_32_BIT 1
#else /* no */
#undef CONFIG_SMC_USE_32_BIT
#endif
#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
/********************************************/
/* !!! CS8900 is __not__ tested on NIOS !!! */
/********************************************/
#define CONFIG_NET_MULTI
#define CONFIG_CS8900 /* Using CS8900 */
#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#undef CONFIG_CS8900_BUS16
#define CONFIG_CS8900_BUS32
#else /* no */
#define CONFIG_CS8900_BUS16
#undef CONFIG_CS8900_BUS32
#endif
#else
#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
#endif
#define CONFIG_ETHADDR 02:80:ae:20:60:6f
#define CONFIG_NETMASK 255.255.255.248
#define CONFIG_IPADDR 192.168.161.84
#define CONFIG_SERVERIP 192.168.161.85
#else
#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
#endif
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
#endif
#define CONFIG_STATUS_LED 1 /* enable status led driver */
#define STATUS_LED_BIT (1 << 0) /* LED[0] */
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_BOOT 0 /* boot LED */
#if (STATUS_LED_BITS > 1)
#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */
#define STATUS_LED_RED 1 /* fail LED */
#endif
#if (STATUS_LED_BITS > 2)
#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
#define STATUS_LED_STATE2 STATUS_LED_OFF
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_YELLOW 2 /* info LED */
#endif
#if (STATUS_LED_BITS > 3)
#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
#define STATUS_LED_STATE3 STATUS_LED_OFF
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
#define STATUS_LED_GREEN 3 /* info LED */
#endif
#define STATUS_LED_PAR 1 /* makes status_led.h happy */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* Diagnostics / Power On Self Tests
*----------------------------------------------------------------------*/
#define CONFIG_POST CONFIG_SYS_POST_RTC
#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_BSP
#define CONFIG_CMD_CDP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_REISER
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
#define CONFIG_CMD_DATE
#define CONFIG_CMD_SPI
#endif
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser
undef to save memory */
#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> "
#endif
/* Default load address */
#if (CONFIG_SYS_SRAM_SIZE != 0)
/* default in SRAM */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
#elif (CONFIG_SYS_SDRAM_SIZE != 0)
/* default in SDRAM */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 1
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
#endif
#else
#undef CONFIG_SYS_LOAD_ADDR /* force error break */
#endif
/* MEM test area */
#if (CONFIG_SYS_SDRAM_SIZE != 0)
/* SDRAM begin to stack area (1MB stack) */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#if 0
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000)
#endif
#else
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#endif
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#else
#undef CONFIG_SYS_MEMTEST_START /* force error break */
#undef CONFIG_SYS_MEMTEST_END
#endif
/*
* JFFS2 partitions
*
*/
/* No command line, one static partition */
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/*
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT ""
#define MTDPARTS_DEFAULT ""
*/
#endif /* __CONFIG_H */

431
include/configs/ADNPESC1_base_32.h
View File

@ -1,431 +0,0 @@
/*
* (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_ADNPESC1_BASE_32_H
#define __CONFIG_ADNPESC1_BASE_32_H
/*
* NIOS CPU configuration. (PART OF configs/ADNPESC1.h)
*
* Here we must define CPU dependencies. Any unsupported option have to
* be undefined or defined with zero, example CPU without data cache / OCI:
*
* #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
* #define CONFIG_SYS_NIOS_CPU_DCACHE 0
* #undef CONFIG_SYS_NIOS_CPU_OCI_BASE
* #undef CONFIG_SYS_NIOS_CPU_OCI_SIZE
*/
/* CPU core */
#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_STACK 0x03000000 /* stack top addr */
#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x02000000 /* IRQ vectors addr */
#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
/* yes(1) */
/* The offset address in flash to check for the Nios signature "Ni".
* (see GM_FlashExec in germs_monitor.s) */
#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
/* on-chip extensions */
#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
/* timer */
#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
/* yes(1) */
/* serial i/o */
#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART0_HS 1 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_UART1 0x00000820 /* UART1 addr */
#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
/* yes(1) */
/* serial peripheral i/o */
#define CONFIG_SYS_NIOS_CPU_SPI_NUMS 1 /* number of spis */
#define CONFIG_SYS_NIOS_CPU_SPI0 0x000008c0 /* SPI0 addr */
#define CONFIG_SYS_NIOS_CPU_SPI0_IRQ 25 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_SPI0_BITS 16 /* data bit */
#define CONFIG_SYS_NIOS_CPU_SPI0_MA 1 /* is master: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_SPI0_SLN 1 /* num slaves */
#define CONFIG_SYS_NIOS_CPU_SPI0_TCLK 250000 /* clock (Hz) */
#define CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2 /* delay (usec) */
#define CONFIG_SYS_NIOS_CPU_SPI0_FB 0 /* first bit msb(0) */
/* lsb(1) */
/* parallel i/o */
#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 14 /* number of parports */
#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 8 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 8 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2 0x00000880 /* PIO2 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 4 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4 0x000008a0 /* PIO4 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5 0x000008b0 /* PIO5 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO5_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6 0x00000900 /* PIO6 addr */
#define CONFIG_SYS_NIOS_CPU_PIO6_IRQ 20 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7 0x00000910 /* PIO7 addr */
#define CONFIG_SYS_NIOS_CPU_PIO7_IRQ 31 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO8 0x00000920 /* PIO8 addr */
#define CONFIG_SYS_NIOS_CPU_PIO8_IRQ 32 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO8_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO8_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO8_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO8_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO8_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO9 0x00000930 /* PIO9 addr */
#define CONFIG_SYS_NIOS_CPU_PIO9_IRQ 33 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO9_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO9_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO9_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO9_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO9_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO10 0x00000940 /* PIO10 addr */
#define CONFIG_SYS_NIOS_CPU_PIO10_IRQ 34 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO10_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO10_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO10_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO10_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO11 0x00000950 /* PIO11 addr */
#define CONFIG_SYS_NIOS_CPU_PIO11_IRQ 35 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO11_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO11_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO11_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO11_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO12 0x00000960 /* PIO12 addr */
#define CONFIG_SYS_NIOS_CPU_PIO12_IRQ 36 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO12_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO12_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO12_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO12_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO13 0x00000970 /* PIO113 addr */
#define CONFIG_SYS_NIOS_CPU_PIO13_IRQ 37 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO13_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO13_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO13_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO13_EDGE 2 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
/* IDE i/f */
#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 2 /* number of IDE contr. */
#define CONFIG_SYS_NIOS_CPU_IDE0 0x00001000 /* IDE0 addr */
#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 36 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_IDE1 0x00001020 /* IDE1 addr */
#define CONFIG_SYS_NIOS_CPU_IDE1_IRQ 37 /* IRQ */
/* memory accessibility */
#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x02000000 /* board SDRAM addr */
#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x01000000 /* board Flash addr */
#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
/* LAN */
#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS (0) /* offset */
#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 16 /* buswidth*/
#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
/* cs8900(1) */
/* ex: openmac(2) */
/* ex: alteramac(3) */
/* external extension */
#define CONFIG_SYS_NIOS_CPU_CS0_BASE 0x40000000 /* board EXT0 addr */
#define CONFIG_SYS_NIOS_CPU_CS0_SIZE (16*1024*1024) /* max. 16 MB size */
#define CONFIG_SYS_NIOS_CPU_CS1_BASE 0x41000000 /* board EXT1 addr */
#define CONFIG_SYS_NIOS_CPU_CS1_SIZE (16*1024*1024) /* max. 16 MB size */
#define CONFIG_SYS_NIOS_CPU_CS2_BASE 0x42000000 /* board EXT2 addr */
#define CONFIG_SYS_NIOS_CPU_CS2_SIZE (16*1024*1024) /* max. 16 MB size */
#define CONFIG_SYS_NIOS_CPU_CS3_BASE 0x43000000 /* board EXT3 addr */
#define CONFIG_SYS_NIOS_CPU_CS3_SIZE (16*1024*1024) /* max. 16 MB size */
/* symbolic redefinition (undef, if not present) */
#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
#define CONFIG_SYS_NIOS_CPU_PORTA_PIO 0 /* PIO0: Port A */
#define CONFIG_SYS_NIOS_CPU_PORTB_PIO 1 /* PIO1: Port D */
#define CONFIG_SYS_NIOS_CPU_PORTC_PIO 2 /* PIO2: Port C */
#define CONFIG_SYS_NIOS_CPU_RCM_PIO 3 /* PIO3: RCM jumper */
#define CONFIG_SYS_NIOS_CPU_WDENA_PIO 4 /* PIO4: watchdog enable*/
#define CONFIG_SYS_NIOS_CPU_WDTOG_PIO 5 /* PIO5: watchdog trigg.*/
/* PIOx: LED bar */
#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
#define CONFIG_SYS_NIOS_CPU_LED_PIO CONFIG_SYS_NIOS_CPU_PORTA_PIO
#else
#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* no LED bar */
#endif
#endif /* __CONFIG_ADNPESC1_BASE_32_H */

555
include/configs/DK1C20.h
View File

@ -1,555 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
* Stephan Linz <linz@li-pro.net>
*
* CompactFlash/IDE:
* (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/***********************************************************************
* Include the whole NIOS CPU configuration.
*
* !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
***********************************************************************/
#if defined(CONFIG_NIOS_SAFE_32)
#include <configs/DK1C20_safe_32.h>
#elif defined(CONFIG_NIOS_STANDARD_32)
#include <configs/DK1C20_standard_32.h>
#else
#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
#endif
/*------------------------------------------------------------------------
* BOARD/CPU -- TOP-LEVEL
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
* BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
#else
#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
* much anywhere. This is pretty flexible for Nios. So here we make some
* arbitrary choices & assume that the monitor is placed at the end of
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately).
*
* -The heap is placed below the monitor.
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
#else
#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
#endif
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
#else
#undef CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0)
#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* Ethernet
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#define CONFIG_SMC_USE_32_BIT 1
#else /* no */
#undef CONFIG_SMC_USE_32_BIT
#endif
#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
/********************************************/
/* !!! CS8900 is __not__ tested on NIOS !!! */
/********************************************/
#define CONFIG_NET_MULTI
#define CONFIG_CS8900 /* Using CS8900 */
#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#undef CONFIG_CS8900_BUS16
#define CONFIG_CS8900_BUS32
#else /* no */
#define CONFIG_CS8900_BUS16
#undef CONFIG_CS8900_BUS32
#endif
#else
#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
#endif
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
#else
#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
#endif
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
#endif
#define CONFIG_STATUS_LED 1 /* enable status led driver */
#define STATUS_LED_BIT (1 << 0) /* LED[0] */
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_BOOT 0 /* boot LED */
#if (STATUS_LED_BITS > 1)
#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
#define STATUS_LED_RED 1 /* fail LED */
#endif
#if (STATUS_LED_BITS > 2)
#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
#define STATUS_LED_STATE2 STATUS_LED_OFF
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_YELLOW 2 /* info LED */
#endif
#if (STATUS_LED_BITS > 3)
#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
#define STATUS_LED_STATE3 STATUS_LED_OFF
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_GREEN 3 /* info LED */
#endif
#define STATUS_LED_PAR 1 /* makes status_led.h happy */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* SEVEN SEGMENT LED DISPLAY
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
#define SEVENSEG_WRONLY 1
#else
#undef SEVENSEG_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
#endif
#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
/*
* Dual 7-Segment Display pin assignment -- read more in your
* "Nios Development Board Reference Manual"
*
*
* (U8) HI:D[15..8] (U9) LO:D[7..0]
* ______ ______
* | D14 | | D6 |
* | | | |
* D9| |D13 D1| |D5
* |______| |______| ___
* | D8 | | D0 | | A |
* | | | | F|___|B
* D10| |D12 D2| |D4 | G |
* |______| |______| E|___|C
* D11 * D3 * D *
* D15 D7 DP
*
*/
#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* ASMI - Active Serial Memory Interface.
*
* ASMI is for Cyclone devices only and only works when the configuration
* is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
*----------------------------------------------------------------------*/
#define CONFIG_NIOS_ASMI /* Enable ASMI */
#define CONFIG_SYS_NIOS_ASMIBASE CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_CDP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_CMD_IDE
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
/*------------------------------------------------------------------------
* COMPACT FLASH
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_IDE)
#define CONFIG_IDE_PREINIT /* Implement id_preinit */
#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
#define CONFIG_SYS_ATA_BASE_ADDR 0x00920a00 /* IDE/ATA base addr */
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */
#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */
#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */
#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */
#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */
#define CONFIG_DOS_PARTITION
/* Board-specific cf regs */
#define CONFIG_SYS_CF_PRESENT 0x009209b0 /* CF Present PIO base */
#define CONFIG_SYS_CF_POWER 0x009209c0 /* CF Power FET PIO base*/
#define CONFIG_SYS_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */
#endif
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "DK1C20 > " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#if (CONFIG_SYS_SRAM_SIZE != 0)
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE /* Default load address */
#else
#undef CONFIG_SYS_LOAD_ADDR
#endif
#if (CONFIG_SYS_SDRAM_SIZE != 0)
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* SDRAM til stack area */
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */
#else
#undef CONFIG_SYS_MEMTEST_START
#undef CONFIG_SYS_MEMTEST_END
#endif
/*
* JFFS2 partitions
*
*/
/* No command line, one static partition, whole device */
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/*
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT ""
#define MTDPARTS_DEFAULT ""
*/
#endif /* __CONFIG_H */

34
include/configs/DK1C20_safe_32.h
View File

@ -1,34 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_DK1C20_SAFE_32_H
#define __CONFIG_DK1C20_SAFE_32_H
/*
* NIOS CPU configuration. (PART OF configs/DK1C20.h)
*
* !!! TODO !!! TODO !!!
*/
#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
#endif /* __CONFIG_DK1C20_SAFE_32_H */

279
include/configs/DK1C20_standard_32.h
View File

@ -1,279 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_DK1C20_STANDARD_32_H
#define __CONFIG_DK1C20_STANDARD_32_H
/*
* NIOS CPU configuration. (PART OF configs/DK1C20.h)
*
* Here we must define CPU dependencies. Any unsupported option have to
* be defined with zero, example CPU without data cache / OCI:
*
* #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
* #define CONFIG_SYS_NIOS_CPU_DCACHE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
*/
/* CPU core */
#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
/* yes(1) */
/* on-chip extensions */
#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
#define CONFIG_SYS_NIOS_CPU_RAM_SIZE 0 /* size */
#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
/* timer */
#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
/* yes(1) */
/* serial i/o */
#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
/* yes(1) */
/* parallel i/o */
#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
/* IDE i/f */
#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
/* active serial memory i/f */
#define CONFIG_SYS_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
#define CONFIG_SYS_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
#define CONFIG_SYS_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
/* memory accessibility */
#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
/* LAN */
#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
/* cs8900(1) */
/* ex: alteramac(2) */
/* symbolic redefinition (undef, if not present) */
#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
#endif /* __CONFIG_DK1C20_STANDARD_32_H */

561
include/configs/DK1S10.h
View File

@ -1,561 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/***********************************************************************
* Include the whole NIOS CPU configuration.
*
* !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
*
***********************************************************************/
#if defined(CONFIG_NIOS_SAFE_32)
#include <configs/DK1S10_safe_32.h>
#elif defined(CONFIG_NIOS_STANDARD_32)
#include <configs/DK1S10_standard_32.h>
#elif defined(CONFIG_NIOS_MTX_LDK_20)
#include <configs/DK1S10_mtx_ldk_20.h>
#else
#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
#endif
/*------------------------------------------------------------------------
* BOARD/CPU -- TOP-LEVEL
*----------------------------------------------------------------------*/
#define CONFIG_NIOS 1 /* NIOS-32 core */
#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
/*------------------------------------------------------------------------
* BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
#else
#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
#endif
#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
#else
#undef CONFIG_SYS_SRAM_BASE
#undef CONFIG_SYS_SRAM_SIZE
#endif
#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
/*------------------------------------------------------------------------
* MEMORY ORGANIZATION - For the most part, you can put things pretty
* much anywhere. This is pretty flexible for Nios. So here we make some
* arbitrary choices & assume that the monitor is placed at the end of
* a memory resource (so you must make sure TEXT_BASE is chosen
* appropriately).
*
* -The heap is placed below the monitor.
* -Global data is placed below the heap.
* -The stack is placed below global data (&grows down).
*----------------------------------------------------------------------*/
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
/*------------------------------------------------------------------------
* FLASH (AM29LV065D)
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
#else
#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* ENVIRONMENT
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
#if defined(CONFIG_NIOS_STANDARD_32)
#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
#elif defined(CONFIG_NIOS_MTX_LDK_20)
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
#else
#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
#endif
#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
#else
#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
#endif
/*------------------------------------------------------------------------
* CONSOLE
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
#else
#undef CONFIG_SYS_NIOS_FIXEDBAUD
#define CONFIG_BAUDRATE 115200
#endif
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
* so an avalon bus timer is required.
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
#endif
#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
#endif
#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
#if (CONFIG_SYS_HZ <= 1000)
#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
#endif
#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
#else
#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
#endif
#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
#else
#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
#endif
/*------------------------------------------------------------------------
* Ethernet -- needs work!
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#define CONFIG_SMC_USE_32_BIT 1
#else /* no */
#undef CONFIG_SMC_USE_32_BIT
#endif
#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
/********************************************/
/* !!! CS8900 is __not__ tested on NIOS !!! */
/********************************************/
#define CONFIG_NET_MULTI
#define CONFIG_CS8900 /* Using CS8900 */
#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
#undef CONFIG_CS8900_BUS16
#define CONFIG_CS8900_BUS32
#else /* no */
#define CONFIG_CS8900_BUS16
#undef CONFIG_CS8900_BUS32
#endif
#else
#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
#endif
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.2.21
#define CONFIG_SERVERIP 192.168.2.16
#else
#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
#endif
/*------------------------------------------------------------------------
* STATUS LEDs
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
#define STATUS_LED_WRONLY 1
#else
#undef STATUS_LED_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
#endif
#define CONFIG_STATUS_LED 1 /* enable status led driver */
#define STATUS_LED_BIT (1 << 0) /* LED[0] */
#define STATUS_LED_STATE STATUS_LED_BLINKING
#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_BOOT 0 /* boot LED */
#if (STATUS_LED_BITS > 1)
#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
#define STATUS_LED_STATE1 STATUS_LED_OFF
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
#define STATUS_LED_RED 1 /* fail LED */
#endif
#if (STATUS_LED_BITS > 2)
#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
#define STATUS_LED_STATE2 STATUS_LED_OFF
#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_YELLOW 2 /* info LED */
#endif
#if (STATUS_LED_BITS > 3)
#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
#define STATUS_LED_STATE3 STATUS_LED_OFF
#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
#define STATUS_LED_GREEN 3 /* info LED */
#endif
#define STATUS_LED_PAR 1 /* makes status_led.h happy */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*------------------------------------------------------------------------
* SEVEN SEGMENT LED DISPLAY
*----------------------------------------------------------------------*/
#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO)
#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
#define SEVENSEG_WRONLY 1
#else
#undef SEVENSEG_WRONLY
#endif
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
#else
#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
#endif
#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
/*
* Dual 7-Segment Display pin assignment -- read more in your
* "Nios Development Board Reference Manual"
*
*
* (U8) HI:D[15..8] (U9) LO:D[7..0]
* ______ ______
* | D14 | | D6 |
* | | | |
* D9| |D13 D1| |D5
* |______| |______| ___
* | D8 | | D0 | | A |
* | | | | F|___|B
* D10| |D12 D2| |D4 | G |
* |______| |______| E|___|C
* D11 * D3 * D *
* D15 D7 DP
*
*/
#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_CDP
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_DISPLAY
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_PORTIO
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_REISER
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_SDRAM
#define CONFIG_CMD_SNTP
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
/*------------------------------------------------------------------------
* KGDB
*----------------------------------------------------------------------*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 9600
#endif
/*------------------------------------------------------------------------
* MISC
*----------------------------------------------------------------------*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
/* Default load address */
#if (CONFIG_SYS_SRAM_SIZE != 0)
/* default in SRAM */
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
#elif (CONFIG_SYS_SDRAM_SIZE != 0)
/* default in SDRAM */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#else
#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
#endif
#else
#undef CONFIG_SYS_LOAD_ADDR /* force error break */
#endif
/* MEM test area */
#if (CONFIG_SYS_SDRAM_SIZE != 0)
/* SDRAM begin to stack area (1MB stack) */
#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#else
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
#endif
#else
#undef CONFIG_SYS_MEMTEST_START /* force error break */
#undef CONFIG_SYS_MEMTEST_END
#endif
/*
* JFFS2 partitions
*
*/
/* No command line, one static partition, whole device */
#undef CONFIG_CMD_MTDPARTS
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
/* mtdparts command line support */
/*
#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT ""
#define MTDPARTS_DEFAULT ""
*/
#endif /* __CONFIG_H */

187
include/configs/DK1S10_mtx_ldk_20.h
View File

@ -1,187 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
#define __CONFIG_DK1S10_MTX_LDK_20_H
/*
* NIOS CPU configuration. (PART OF configs/DK1S10.h)
*
* Here we must define CPU dependencies. Any unsupported option have to
* be defined with zero, example CPU without data cache / OCI:
*
* #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
* #define CONFIG_SYS_NIOS_CPU_DCACHE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
*/
/* CPU core */
#define CONFIG_SYS_NIOS_CPU_CLK 75000000 /* NIOS CPU clock */
#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_STACK 0x02000000 /* stack top addr */
#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x01000000 /* IRQ vectors addr */
#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
/* yes(1) */
/* The offset address in flash to check for the Nios signature "Ni".
* (see GM_FlashExec in germs_monitor.s) */
#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
/* on-chip extensions */
#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
/* timer */
#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
/* yes(1) */
/* serial i/o */
#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART0_SB 2 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_UART1 0x000008a0 /* UART1 addr */
#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
/* yes(1) */
/* parallel i/o */
#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 2 /* number of parports */
#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 4 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
/* IDE i/f */
#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
#define CONFIG_SYS_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */
#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
/* memory accessibility */
#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00800000 /* board Flash addr */
#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
/* LAN */
#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
/* cs8900(1) */
/* ex: openmac(2) */
/* ex: alteramac(3) */
/* symbolic redefinition (undef, if not present) */
#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 0 /* PIO0: CF power/sw. */
#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 1 /* PIO1: buttons */
#undef CONFIG_SYS_NIOS_CPU_LCD_PIO /* PIOx: ASCII LCD */
#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* PIOx: LED bar */
#undef CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO /* PIOx: 7-seg. display */
#undef CONFIG_SYS_NIOS_CPU_RECONF_PIO /* PIOx: reconf pin */
#undef CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO /* PIOx: CF present IRQ */
#undef CONFIG_SYS_NIOS_CPU_CFATASEL_PIO /* PIOx: CF ATA select */
#endif /* __CONFIG_DK1S10_MTX_LDK_20_H */

34
include/configs/DK1S10_safe_32.h
View File

@ -1,34 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_DK1S10_SAFE_32_H
#define __CONFIG_DK1S10_SAFE_32_H
/*
* NIOS CPU configuration. (PART OF configs/DK1S10.h)
*
* !!! TODO !!! TODO !!!
*/
#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
#endif /* __CONFIG_DK1S10_SAFE_32_H */

274
include/configs/DK1S10_standard_32.h
View File

@ -1,274 +0,0 @@
/*
* (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
* Stephan Linz <linz@li-pro.net>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_DK1S10_STANDARD_32_H
#define __CONFIG_DK1S10_STANDARD_32_H
/*
* NIOS CPU configuration. (PART OF configs/DK1S10.h)
*
* Here we must define CPU dependencies. Any unsupported option have to
* be defined with zero, example CPU without data cache / OCI:
*
* #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
* #define CONFIG_SYS_NIOS_CPU_DCACHE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
* #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
*/
/* CPU core */
#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
/* yes(1) */
/* on-chip extensions */
#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
#define CONFIG_SYS_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
/* timer */
#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
/* yes(1) */
/* serial i/o */
#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
/* odd(1) */
/* even(2) */
#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
/* crts(1) */
#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
/* yes(1) */
/* parallel i/o */
#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
/* out(1) */
/* in(2) */
#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
/* yes(1) */
#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
/* fall(1) */
/* rise(2) */
/* any(3) */
#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
/* level(1)*/
/* edge(2) */
/* IDE i/f */
#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
/* memory accessibility */
#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
/* LAN */
#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
/* cs8900(1) */
/* ex: alteramac(2) */
/* symbolic redefinition (undef, if not present) */
#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
#endif /* __CONFIG_DK1S10_STANDARD_32_H */

5
include/image.h
View File

@ -100,7 +100,6 @@
#define IH_ARCH_SPARC 10 /* Sparc */
#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */
#define IH_ARCH_M68K 12 /* M68K */
#define IH_ARCH_NIOS 13 /* Nios-32 */
#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */
#define IH_ARCH_NIOS2 15 /* Nios-II */
#define IH_ARCH_BLACKFIN 16 /* Blackfin */
@ -493,8 +492,6 @@ static inline int image_check_target_arch (const image_header_t *hdr)
if (!image_check_arch (hdr, IH_ARCH_MICROBLAZE))
#elif defined(__mips__)
if (!image_check_arch (hdr, IH_ARCH_MIPS))
#elif defined(__nios__)
if (!image_check_arch (hdr, IH_ARCH_NIOS))
#elif defined(__nios2__)
if (!image_check_arch (hdr, IH_ARCH_NIOS2))
#elif defined(__PPC__)
@ -647,8 +644,6 @@ static inline int fit_image_check_target_arch (const void *fdt, int node)
if (!fit_image_check_arch (fdt, node, IH_ARCH_MICROBLAZE))
#elif defined(__mips__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_MIPS))
#elif defined(__nios__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS))
#elif defined(__nios2__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS2))
#elif defined(__PPC__)

183
include/nios-io.h
View File

@ -1,183 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*************************************************************************
* Altera Nios Standard Peripherals
************************************************************************/
#ifndef __NIOSIO_H__
#define __NIOSIO_H__
/*------------------------------------------------------------------------
* UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_uart_t {
unsigned rxdata; /* Rx data reg */
unsigned txdata; /* Tx data reg */
unsigned status; /* Status reg */
unsigned control; /* Control reg */
unsigned divisor; /* Baud rate divisor reg */
unsigned endofpacket; /* End-of-packet reg */
}nios_uart_t;
/* status register */
#define NIOS_UART_PE (1 << 0) /* parity error */
#define NIOS_UART_FE (1 << 1) /* frame error */
#define NIOS_UART_BRK (1 << 2) /* break detect */
#define NIOS_UART_ROE (1 << 3) /* rx overrun */
#define NIOS_UART_TOE (1 << 4) /* tx overrun */
#define NIOS_UART_TMT (1 << 5) /* tx empty */
#define NIOS_UART_TRDY (1 << 6) /* tx ready */
#define NIOS_UART_RRDY (1 << 7) /* rx ready */
#define NIOS_UART_E (1 << 8) /* exception */
#define NIOS_UART_DCTS (1 << 10) /* cts change */
#define NIOS_UART_CTS (1 << 11) /* cts */
#define NIOS_UART_EOP (1 << 12) /* eop detected */
/* control register */
#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/
#define NIOS_UART_IFE (1 << 1) /* frame error int ena */
#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */
#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */
#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */
#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */
#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */
#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */
#define NIOS_UART_IE (1 << 8) /* exception int ena */
#define NIOS_UART_TBRK (1 << 9) /* transmit break */
#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */
#define NIOS_UART_RTS (1 << 11) /* rts */
#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */
/*------------------------------------------------------------------------
* TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_timer_t {
unsigned status; /* Timer status reg */
unsigned control; /* Timer control reg */
unsigned periodl; /* Timeout period low */
unsigned periodh; /* Timeout period high */
unsigned snapl; /* Snapshot low */
unsigned snaph; /* Snapshot high */
}nios_timer_t;
/* status register */
#define NIOS_TIMER_TO (1 << 0) /* Timeout */
#define NIOS_TIMER_RUN (1 << 1) /* Timer running */
/* control register */
#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */
#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */
#define NIOS_TIMER_START (1 << 2) /* Start timer */
#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */
/*------------------------------------------------------------------------
* PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_pio_t {
unsigned int data; /* Data value at each PIO in/out */
unsigned int direction; /* Data direct. for each PIO bit */
unsigned int interruptmask; /* Per-bit IRQ enable/disable */
unsigned int edgecapture; /* Per-bit sync. edge detect & hold */
}nios_pio_t;
/* direction register */
#define NIOS_PIO_OUT (1) /* PIO bit is output */
#define NIOS_PIO_IN (0) /* PIO bit is input */
/*------------------------------------------------------------------------
* SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
*----------------------------------------------------------------------*/
typedef volatile struct nios_spi_t {
unsigned rxdata; /* Rx data reg */
unsigned txdata; /* Tx data reg */
unsigned status; /* Status reg */
unsigned control; /* Control reg */
unsigned reserved; /* (master only) */
unsigned slaveselect; /* SPI slave select mask (master only) */
}nios_spi_t;
/* status register */
#define NIOS_SPI_ROE (1 << 3) /* rx overrun */
#define NIOS_SPI_TOE (1 << 4) /* tx overrun */
#define NIOS_SPI_TMT (1 << 5) /* tx empty */
#define NIOS_SPI_TRDY (1 << 6) /* tx ready */
#define NIOS_SPI_RRDY (1 << 7) /* rx ready */
#define NIOS_SPI_E (1 << 8) /* exception */
/* control register */
#define NIOS_SPI_IROE (1 << 3) /* rx overrun int ena */
#define NIOS_SPI_ITOE (1 << 4) /* tx overrun int ena */
#define NIOS_SPI_ITRDY (1 << 6) /* tx ready int ena */
#define NIOS_SPI_IRRDY (1 << 7) /* rx ready int ena */
#define NIOS_SPI_IE (1 << 8) /* exception int ena */
#define NIOS_SPI_SSO (1 << 10) /* override SS_n output */
/*------------------------------------------------------------------------
* ASMI
*----------------------------------------------------------------------*/
typedef volatile struct nios_asmi_t {
unsigned rxdata; /* Rx data reg */
unsigned txdata; /* Tx data reg */
unsigned status; /* Status reg */
unsigned control; /* Control reg */
unsigned reserved;
unsigned slavesel; /* Slave select */
unsigned endofpacket; /* End-of-packet reg */
}nios_asmi_t;
/* status register */
#define NIOS_ASMI_ROE (1 << 3) /* rx overrun */
#define NIOS_ASMI_TOE (1 << 4) /* tx overrun */
#define NIOS_ASMI_TMT (1 << 5) /* tx empty */
#define NIOS_ASMI_TRDY (1 << 6) /* tx ready */
#define NIOS_ASMI_RRDY (1 << 7) /* rx ready */
#define NIOS_ASMI_E (1 << 8) /* exception */
#define NIOS_ASMI_EOP (1 << 9) /* eop detected */
/* control register */
#define NIOS_ASMI_IROE (1 << 3) /* rx overrun int ena */
#define NIOS_ASMI_ITOE (1 << 4) /* tx overrun int ena */
#define NIOS_ASMI_ITRDY (1 << 6) /* tx ready int ena */
#define NIOS_ASMI_IRRDY (1 << 7) /* rx ready int ena */
#define NIOS_ASMI_IE (1 << 8) /* exception int ena */
#define NIOS_ASMI_IEOP (1 << 9) /* rx eop int ena */
#define NIOS_ASMI_SSO (1 << 10) /* slave select enable */
/*------------------------------------------------------------------------
* JTAG UART
*----------------------------------------------------------------------*/
typedef volatile struct nios_jtag_t {
unsigned short rxcntl; /* Rx data/cntl reg */
unsigned short txcntl; /* Tx data/cntl reg */
unsigned short errcntl; /* Err dta/cntl reg */
}nios_jtag_t;
/* status register */
#define NIOS_JTAG_TRDY (1 << 8) /* tx ready bit */
#define NIOS_JTAG_RRDY (1 << 8) /* rx ready bit */
#endif /* __NIOSIO_H__ */

77
include/nios.h
View File

@ -1,77 +0,0 @@
/*
* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
* Scott McNutt <smcnutt@psyent.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __NIOS_H__
#define __NIOS_H__
/*------------------------------------------------------------------------
* Control registers -- use with wrctl() & rdctl()
*----------------------------------------------------------------------*/
#define CTL_STATUS 0x00 /* Processor status */
#define CTL_ISTATUS 0x01 /* Saved status (exception) */
#define CTL_WVALID 0x02 /* Valid window limit */
#define CTL_ICACHE 0x05 /* I-cache line-invalidate */
#define CTL_CPU_ID 0x06 /* CPU version id */
#define CTL_DCACHE 0x07 /* D-cache line-invalidate */
#define CTL_CLR_IE 0x08 /* Interrupt clear (disable) */
#define CTL_SET_IE 0x09 /* Interrupt set (enable) */
/*------------------------------------------------------------------------
* Access to control regs
*----------------------------------------------------------------------*/
#define _str_(s) #s
#define rdctl(reg)\
({unsigned int val;\
asm volatile( "pfx " _str_(reg) "\n\t rdctl %0"\
: "=r" (val) ); val;})
#define wrctl(reg,val)\
asm volatile( "pfx " _str_(reg) "\n\t wrctl %0 \n\t nop"\
: : "r" (val))
/*------------------------------------------------------------------------
* Control reg bit masks
*----------------------------------------------------------------------*/
#define STATUS_DC (1<<17) /* Data cache enable */
#define STATUS_IC (1<<16) /* Instruction cache enable */
#define STATUS_IE (1<<15) /* Interrupt enable */
#define STATUS_IPRI (0x3f<<9) /* Interrupt priority */
#define STATUS_CWP (0x1f<<4) /* Current window pointer */
#define STATUS_N (1<<3) /* Condition code: negative */
#define STATUS_V (1<<2) /* Condition code: overflow */
#define STATUS_Z (1<<1) /* Condition code: zero */
#define STATUS_C (1<<0) /* Condition code: carry/borrow */
static inline unsigned ipri( unsigned prio )
{
unsigned tmp;
unsigned status = rdctl(CTL_STATUS);
prio = (prio << 9) & STATUS_IPRI;
tmp = (status & ~STATUS_IPRI) | prio;
wrctl(CTL_STATUS,tmp);
return( (status & STATUS_IPRI) >> 9);
}
#endif /* __NIOS_H__ */

4
include/watchdog.h
View File

@ -31,10 +31,6 @@
# error "Configuration error: CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG can't be used together."
#endif
#if defined(__ASSEMBLY__) && defined(__NIOS__)
# error "Configuration error: WATCHDOG_RESET inside assembler not supported for Nios platforms."
#endif
/*
* Hardware watchdog
*/