arm, at91: add Siemens board taurus and axm
enable support for the siemens AT91SAM9G20 based boards taurus and axm. Signed-off-by: Roger Meier <r.meier@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
This commit is contained in:
Heiko Schocher
Andreas Bießmann
parent
bcf9fe37f5
commit
0f8bc283a3
18
board/siemens/taurus/Makefile
Normal file
18
board/siemens/taurus/Makefile
Normal file
@ -0,0 +1,18 @@
|
||||
#
|
||||
# Makefile for Siemens TAURUS (AT91SAM9G20) based board
|
||||
# (C) Copyright 2013 Siemens AG
|
||||
#
|
||||
# Based on:
|
||||
# U-Boot file: board/atmel/at91sam9260ek/Makefile
|
||||
#
|
||||
# (C) Copyright 2003-2008
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# (C) Copyright 2008
|
||||
# Stelian Pop <stelian@popies.net>
|
||||
# Lead Tech Design <www.leadtechdesign.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += taurus.o
|
||||
160
board/siemens/taurus/taurus.c
Normal file
160
board/siemens/taurus/taurus.c
Normal file
@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Board functions for Siemens TAURUS (AT91SAM9G20) based boards
|
||||
* (C) Copyright Siemens AG
|
||||
*
|
||||
* Based on:
|
||||
* U-Boot file: board/atmel/at91sam9260ek/at91sam9260ek.c
|
||||
*
|
||||
* (C) Copyright 2007-2008
|
||||
* Stelian Pop <stelian@popies.net>
|
||||
* Lead Tech Design <www.leadtechdesign.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/at91sam9260_matrix.h>
|
||||
#include <asm/arch/at91sam9_smc.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_rstc.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/at91sam9_sdramc.h>
|
||||
#include <atmel_mci.h>
|
||||
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
static void taurus_nand_hw_init(void)
|
||||
{
|
||||
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
||||
struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
|
||||
unsigned long csa;
|
||||
|
||||
/* Assign CS3 to NAND/SmartMedia Interface */
|
||||
csa = readl(&matrix->ebicsa);
|
||||
csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
|
||||
writel(csa, &matrix->ebicsa);
|
||||
|
||||
/* Configure SMC CS3 for NAND/SmartMedia */
|
||||
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
|
||||
AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
|
||||
&smc->cs[3].setup);
|
||||
writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
|
||||
AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(3),
|
||||
&smc->cs[3].pulse);
|
||||
writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
|
||||
&smc->cs[3].cycle);
|
||||
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
||||
AT91_SMC_MODE_EXNW_DISABLE |
|
||||
AT91_SMC_MODE_DBW_8 |
|
||||
AT91_SMC_MODE_TDF_CYCLE(3),
|
||||
&smc->cs[3].mode);
|
||||
|
||||
/* Configure RDY/BSY */
|
||||
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
||||
|
||||
/* Enable NandFlash */
|
||||
at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
static void taurus_macb_hw_init(void)
|
||||
{
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
/* Enable EMAC clock */
|
||||
writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
|
||||
|
||||
/*
|
||||
* Disable pull-up on:
|
||||
* RXDV (PA17) => PHY normal mode (not Test mode)
|
||||
* ERX0 (PA14) => PHY ADDR0
|
||||
* ERX1 (PA15) => PHY ADDR1
|
||||
* ERX2 (PA25) => PHY ADDR2
|
||||
* ERX3 (PA26) => PHY ADDR3
|
||||
* ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
|
||||
*
|
||||
* PHY has internal pull-down
|
||||
*/
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 14, 0);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 15, 0);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 0);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 25, 0);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 26, 0);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 28, 0);
|
||||
|
||||
at91_phy_reset();
|
||||
|
||||
at91_set_gpio_input(AT91_PIN_PA25, 1); /* ERST tri-state */
|
||||
|
||||
/* Re-enable pull-up */
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 14, 1);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 15, 1);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 25, 1);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 26, 1);
|
||||
at91_set_pio_pullup(AT91_PIO_PORTA, 28, 1);
|
||||
|
||||
/* Initialize EMAC=MACB hardware */
|
||||
at91_macb_hw_init();
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
||||
int board_mmc_init(bd_t *bd)
|
||||
{
|
||||
at91_mci_hw_init();
|
||||
|
||||
return atmel_mci_init((void *)ATMEL_BASE_MCI);
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
||||
|
||||
/* Enable clocks for all PIOs */
|
||||
writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
|
||||
(1 << ATMEL_ID_PIOC),
|
||||
&pmc->pcer);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
at91_seriald_hw_init();
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
taurus_nand_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_MACB
|
||||
taurus_macb_hw_init();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
@ -139,6 +139,8 @@ Active arm arm926ejs at91 ronetix pm9263
|
||||
Active arm arm926ejs at91 ronetix pm9g45 pm9g45 pm9g45:AT91SAM9G45 Ilko Iliev <iliev@ronetix.at>
|
||||
Active arm arm926ejs at91 taskit stamp9g20 portuxg20 stamp9g20:AT91SAM9G20,PORTUXG20 Markus Hubig <mhubig@imko.de>
|
||||
Active arm arm926ejs at91 taskit stamp9g20 stamp9g20 stamp9g20:AT91SAM9G20 Markus Hubig <mhubig@imko.de>
|
||||
Active arm arm926ejs at91 siemens taurus axm taurus:AT91SAM9G20,MACH_TYPE=2068,BOARD_AXM Heiko Schocher <hs@denx.de>
|
||||
Active arm arm926ejs at91 siemens taurus taurus taurus:AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS Heiko Schocher <hs@denx.de>
|
||||
Active arm arm926ejs davinci ait cam_enc_4xx cam_enc_4xx cam_enc_4xx Heiko Schocher <hs@denx.de>
|
||||
Active arm arm926ejs davinci Barix ipam390 ipam390 - Heiko Schocher <hs@denx.de>
|
||||
Active arm arm926ejs davinci davinci da8xxevm da830evm - Nick Thompson <nick.thompson@gefanuc.com>
|
||||
|
||||
160
include/configs/taurus.h
Normal file
160
include/configs/taurus.h
Normal file
@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Common board functions for Siemens TAURUS (AT91SAM9G20) based boards
|
||||
* (C) Copyright 2013 Siemens AG
|
||||
*
|
||||
* Based on:
|
||||
* U-Boot file: include/configs/at91sam9260ek.h
|
||||
*
|
||||
* (C) Copyright 2007-2008
|
||||
* Stelian Pop <stelian@popies.net>
|
||||
* Lead Tech Design <www.leadtechdesign.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* SoC must be defined first, before hardware.h is included.
|
||||
* In this case SoC is defined in boards.cfg.
|
||||
*/
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define MACH_TYPE_TAURUS 2067
|
||||
#define MACH_TYPE_AXM 2068
|
||||
|
||||
/*
|
||||
* Warning: changing CONFIG_SYS_TEXT_BASE requires
|
||||
* adapting the initial boot program.
|
||||
* Since the linker has to swallow that define, we must use a pure
|
||||
* hex number here!
|
||||
*/
|
||||
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x23f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* main clock xtal */
|
||||
#define CONFIG_SYS_HZ 1000
|
||||
|
||||
/* Misc CPU related */
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS
|
||||
#define CONFIG_INITRD_TAG
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
|
||||
#define CONFIG_AT91_GPIO
|
||||
#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
||||
#define CONFIG_USART_ID ATMEL_ID_SYS
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_BDI
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_IMLS
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#undef CONFIG_CMD_SOURCE
|
||||
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_NAND
|
||||
|
||||
/*
|
||||
* SDRAM: 1 bank, min 32, max 128 MB
|
||||
* Initialized before u-boot gets started.
|
||||
*/
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
|
||||
#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
|
||||
|
||||
/*
|
||||
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
||||
* leaving the correct space for initial global data structure above
|
||||
* that address while providing maximum stack area below.
|
||||
*/
|
||||
# define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
/* NAND flash */
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_ATMEL
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||||
#define CONFIG_SYS_NAND_DBW_8
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||||
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
||||
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
|
||||
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
|
||||
#endif
|
||||
|
||||
/* NOR flash - no real flash on this board */
|
||||
#define CONFIG_SYS_NO_FLASH 1
|
||||
|
||||
/* Ethernet */
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_AT91_WANTS_COMMON_PHY
|
||||
|
||||
/* USB */
|
||||
#if defined(CONFIG_BOARD_TAURUS)
|
||||
#define CONFIG_USB_ATMEL
|
||||
#define CONFIG_USB_OHCI_NEW
|
||||
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
||||
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
|
||||
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
|
||||
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
|
||||
#define CONFIG_USB_STORAGE
|
||||
#endif
|
||||
|
||||
/* load address */
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000
|
||||
|
||||
/* bootstrap in spi flash , u-boot + env + linux in nandflash */
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0x100000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x180000
|
||||
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x300000; bootm"
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256k(env),256k(env_redundant),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"root=/dev/mtdblock7 rw rootfstype=jffs2"
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE \
|
||||
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
#define CONFIG_SYS_MALLOC_LEN \
|
||||
ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user