Merge git://git.denx.de/u-boot-usb

drivers/usb/dwc3/Makefile

@@ -6,3 +6,4 @@ dwc3-y					+= gadget.o ep0.o
 
 obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
 obj-$(CONFIG_USB_DWC3_PHY_OMAP)		+= ti_usb_phy.o
+obj-$(CONFIG_USB_DWC3_PHY_SAMSUNG)	+= samsung_usb_phy.o

drivers/usb/dwc3/samsung_usb_phy.c

@@ -0,0 +1,78 @@
+/**
+ * samsung_usb_phy.c - DesignWare USB3 (DWC3) PHY handling file
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ *
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0
+ */
+
+#include <common.h>
+#include <asm/arch/power.h>
+#include <asm/arch/xhci-exynos.h>
+
+void exynos5_usb3_phy_init(struct exynos_usb3_phy *phy)
+{
+	u32 reg;
+
+	/* Reset USB 3.0 PHY */
+	writel(0x0, &phy->phy_reg0);
+
+	clrbits_le32(&phy->phy_param0,
+			/* Select PHY CLK source */
+			PHYPARAM0_REF_USE_PAD |
+			/* Set Loss-of-Signal Detector sensitivity */
+			PHYPARAM0_REF_LOSLEVEL_MASK);
+	setbits_le32(&phy->phy_param0, PHYPARAM0_REF_LOSLEVEL);
+
+
+	writel(0x0, &phy->phy_resume);
+
+	/*
+	 * Setting the Frame length Adj value[6:1] to default 0x20
+	 * See xHCI 1.0 spec, 5.2.4
+	 */
+	setbits_le32(&phy->link_system,
+			LINKSYSTEM_XHCI_VERSION_CONTROL |
+			LINKSYSTEM_FLADJ(0x20));
+
+	/* Set Tx De-Emphasis level */
+	clrbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH_MASK);
+	setbits_le32(&phy->phy_param1, PHYPARAM1_PCS_TXDEEMPH);
+
+	setbits_le32(&phy->phy_batchg, PHYBATCHG_UTMI_CLKSEL);
+
+	/* PHYTEST POWERDOWN Control */
+	clrbits_le32(&phy->phy_test,
+			PHYTEST_POWERDOWN_SSP |
+			PHYTEST_POWERDOWN_HSP);
+
+	/* UTMI Power Control */
+	writel(PHYUTMI_OTGDISABLE, &phy->phy_utmi);
+
+		/* Use core clock from main PLL */
+	reg = PHYCLKRST_REFCLKSEL_EXT_REFCLK |
+		/* Default 24Mhz crystal clock */
+		PHYCLKRST_FSEL(FSEL_CLKSEL_24M) |
+		PHYCLKRST_MPLL_MULTIPLIER_24MHZ_REF |
+		PHYCLKRST_SSC_REFCLKSEL(0) |
+		/* Force PortReset of PHY */
+		PHYCLKRST_PORTRESET |
+		/* Digital power supply in normal operating mode */
+		PHYCLKRST_RETENABLEN |
+		/* Enable ref clock for SS function */
+		PHYCLKRST_REF_SSP_EN |
+		/* Enable spread spectrum */
+		PHYCLKRST_SSC_EN |
+		/* Power down HS Bias and PLL blocks in suspend mode */
+		PHYCLKRST_COMMONONN;
+
+	writel(reg, &phy->phy_clk_rst);
+
+	/* giving time to Phy clock to settle before resetting */
+	udelay(10);
+
+	reg &= ~PHYCLKRST_PORTRESET;
+	writel(reg, &phy->phy_clk_rst);
+}

drivers/usb/gadget/f_mass_storage.c

@@ -671,7 +671,7 @@ static int sleep_thread(struct fsg_common *common)
 		if (common->thread_wakeup_needed)
 			break;
 
-		if (++i == 50000) {
+		if (++i == 20000) {
 			busy_indicator();
 			i = 0;
 			k++;

drivers/usb/host/ehci-fsl.c

@@ -76,7 +76,7 @@ int ehci_hcd_init(int index, enum usb_init_type init,
 		break;
 	default:
 		printf("ERROR: wrong controller index!!\n");
-		break;
+		return -EINVAL;
 	};
 
 	*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);