From 0bbaa17208435104ffb00c996fc1145902220440 Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Tue, 22 Jan 2019 15:55:46 +0100
Subject: [PATCH] xilinx: common: Remove !DM_i2C code for reading mac from
 eeprom

All platforms are converted to DM_I2C that's why there is no reason to
keep this code here.

Note: Update also Makefile till zc706_eeprom is updated.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
 board/xilinx/common/board.c | 19 -------------------
 drivers/misc/Kconfig        |  1 +
 2 files changed, 1 insertion(+), 19 deletions(-)

diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c
index 122c36589a..c1abe4e004 100644
--- a/board/xilinx/common/board.c
+++ b/board/xilinx/common/board.c
@@ -8,24 +8,6 @@
 #include <dm/uclass.h>
 #include <i2c.h>
 
-#if !defined(CONFIG_DM_I2C)
-int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
-{
-#if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \
-    defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) && \
-    defined(CONFIG_ZYNQ_EEPROM_BUS)
-	i2c_set_bus_num(CONFIG_ZYNQ_EEPROM_BUS);
-
-	if (eeprom_read(CONFIG_ZYNQ_GEM_EEPROM_ADDR,
-			CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET,
-			ethaddr, 6))
-		printf("I2C EEPROM MAC address read failed\n");
-#endif
-
-	return 0;
-}
-
-#else
 int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 {
 	int ret = -ENOSYS;
@@ -54,4 +36,3 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr)
 
 	return ret;
 }
-#endif
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 704c8dd195..d6e677fba8 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -245,6 +245,7 @@ config SPL_I2C_EEPROM
 config ZYNQ_GEM_I2C_MAC_OFFSET
 	hex "Set the I2C MAC offset"
 	default 0x0
+	depends on DM_I2C
 	help
 	  Set the MAC offset for i2C.