Merge branch '2020-01-27-master-imports'
- Add Dialog DA9063 PMIC support - s35392a RTC bugfix - Allow for opt-in of removal of DTB properties from the resulting binary.
This commit is contained in:
Tom Rini
commit
0ab16bf3b7
12
cmd/pmic.c
12
cmd/pmic.c
@ -95,7 +95,7 @@ static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
|
||||
for (reg = 0; reg < pmic_reg_count(dev); reg++) {
|
||||
ret = pmic_reg_read(dev, reg);
|
||||
if (ret < 0) {
|
||||
if (ret < 0 && ret != -ENODATA) {
|
||||
printf("Can't read register: %d\n", reg);
|
||||
return failure(ret);
|
||||
}
|
||||
@ -103,7 +103,15 @@ static int do_dump(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
||||
if (!(reg % 16))
|
||||
printf("\n0x%02x: ", reg);
|
||||
|
||||
printf(fmt, ret);
|
||||
if (ret == -ENODATA) {
|
||||
int i;
|
||||
|
||||
for (i = 0; i < priv->trans_len; i++)
|
||||
puts("--");
|
||||
puts(" ");
|
||||
} else {
|
||||
printf(fmt, ret);
|
||||
}
|
||||
}
|
||||
printf("\n");
|
||||
|
||||
|
||||
@ -26,6 +26,8 @@ int sata_remove(int devnum)
|
||||
struct udevice *dev;
|
||||
int rc;
|
||||
|
||||
blk_unbind_all(IF_TYPE_SATA);
|
||||
|
||||
rc = uclass_find_device(UCLASS_AHCI, devnum, &dev);
|
||||
if (!rc && !dev)
|
||||
rc = uclass_find_first_device(UCLASS_AHCI, &dev);
|
||||
|
||||
@ -46,6 +46,8 @@ CONFIG_EFI_PARTITION=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_OF_EMBED=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="imx6q-tbs2910"
|
||||
CONFIG_OF_DTB_PROPS_REMOVE=y
|
||||
CONFIG_OF_REMOVE_PROPS="dmas dma-names interrupt-parent interrupts interrupts-extended interrupt-names interrupt-map interrupt-map-mask"
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
CONFIG_DM=y
|
||||
|
||||
@ -40,6 +40,20 @@ config PMIC_ACT8846
|
||||
functions. It uses an I2C interface and is designed for use with
|
||||
tablets and smartphones.
|
||||
|
||||
config DM_PMIC_DA9063
|
||||
bool "Enable Driver Model for the Dialog DA9063 PMIC"
|
||||
depends on DM_PMIC
|
||||
help
|
||||
This config enables implementation of driver-model pmic uclass features
|
||||
for PMIC DA9063. The driver implements read/write operations.
|
||||
|
||||
config SPL_DM_PMIC_DA9063
|
||||
bool "Enable Driver Model for the Dialog DA9063 PMIC in SPL"
|
||||
depends on DM_PMIC && SPL
|
||||
help
|
||||
This config enables implementation of driver-model pmic uclass features
|
||||
for PMIC DA9063. The driver implements read/write operations.
|
||||
|
||||
config PMIC_AS3722
|
||||
bool "Enable support for the Austria Micro Systems (AMS) AS7322 PMIC"
|
||||
help
|
||||
|
||||
@ -5,6 +5,7 @@
|
||||
|
||||
obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
|
||||
obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o
|
||||
obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
|
||||
obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
|
||||
obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
|
||||
obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
|
||||
|
||||
130
drivers/power/pmic/da9063.c
Normal file
130
drivers/power/pmic/da9063.c
Normal file
@ -0,0 +1,130 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2018 Flowbird
|
||||
* Martin Fuzzey <martin.fuzzey@flowbird.group>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <fdtdec.h>
|
||||
#include <errno.h>
|
||||
#include <dm.h>
|
||||
#include <i2c.h>
|
||||
#include <power/pmic.h>
|
||||
#include <power/regulator.h>
|
||||
#include <power/da9063_pmic.h>
|
||||
|
||||
static const struct pmic_child_info pmic_children_info[] = {
|
||||
{ .prefix = "ldo", .driver = DA9063_LDO_DRIVER },
|
||||
{ .prefix = "b", .driver = DA9063_BUCK_DRIVER },
|
||||
{ },
|
||||
};
|
||||
|
||||
/*
|
||||
* The register map is non contiguous and attempts to read in the holes fail.
|
||||
* But "pmic dump" tries to dump the full register map.
|
||||
* So define the holes here so we can fix that.
|
||||
*/
|
||||
struct da9063_reg_hole {
|
||||
u16 first;
|
||||
u16 last;
|
||||
};
|
||||
|
||||
static const struct da9063_reg_hole da9063_reg_holes[] = {
|
||||
DA9063_REG_HOLE_1,
|
||||
DA9063_REG_HOLE_2,
|
||||
DA9063_REG_HOLE_3,
|
||||
/* These aren't readable. I can't see why from the datasheet but
|
||||
* attempts to read fail and the kernel marks them unreadable too,
|
||||
*/
|
||||
{DA9063_REG_OTP_COUNT, DA9063_REG_OTP_DATA},
|
||||
};
|
||||
|
||||
static int da9063_reg_count(struct udevice *dev)
|
||||
{
|
||||
return DA9063_NUM_OF_REGS;
|
||||
}
|
||||
|
||||
static bool da9063_reg_valid(uint reg)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(da9063_reg_holes); i++) {
|
||||
const struct da9063_reg_hole *hole = &da9063_reg_holes[i];
|
||||
|
||||
if (reg >= hole->first && reg <= hole->last)
|
||||
return false;
|
||||
}
|
||||
|
||||
return true;
|
||||
}
|
||||
|
||||
static int da9063_write(struct udevice *dev, uint reg, const uint8_t *buff,
|
||||
int len)
|
||||
{
|
||||
if (dm_i2c_write(dev, reg, buff, len)) {
|
||||
pr_err("write error to device: %p register: %#x!", dev, reg);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9063_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
|
||||
{
|
||||
if (!da9063_reg_valid(reg))
|
||||
return -ENODATA;
|
||||
|
||||
if (dm_i2c_read(dev, reg, buff, len)) {
|
||||
pr_err("read error from device: %p register: %#x!", dev, reg);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9063_bind(struct udevice *dev)
|
||||
{
|
||||
ofnode regulators_node;
|
||||
int children;
|
||||
|
||||
regulators_node = dev_read_subnode(dev, "regulators");
|
||||
if (!ofnode_valid(regulators_node)) {
|
||||
debug("%s: %s regulators subnode not found!", __func__,
|
||||
dev->name);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
debug("%s: '%s' - found regulators subnode\n", __func__, dev->name);
|
||||
|
||||
children = pmic_bind_children(dev, regulators_node, pmic_children_info);
|
||||
if (!children)
|
||||
debug("%s: %s - no child found\n", __func__, dev->name);
|
||||
|
||||
/* Always return success for this device */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9063_probe(struct udevice *dev)
|
||||
{
|
||||
return i2c_set_chip_addr_offset_mask(dev, 0x1);
|
||||
}
|
||||
|
||||
static struct dm_pmic_ops da9063_ops = {
|
||||
.reg_count = da9063_reg_count,
|
||||
.read = da9063_read,
|
||||
.write = da9063_write,
|
||||
};
|
||||
|
||||
static const struct udevice_id da9063_ids[] = {
|
||||
{ .compatible = "dlg,da9063" },
|
||||
{ }
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(pmic_da9063) = {
|
||||
.name = "da9063_pmic",
|
||||
.id = UCLASS_PMIC,
|
||||
.of_match = da9063_ids,
|
||||
.bind = da9063_bind,
|
||||
.probe = da9063_probe,
|
||||
.ops = &da9063_ops,
|
||||
};
|
||||
@ -60,6 +60,26 @@ config SPL_DM_REGULATOR_BD71837
|
||||
This config enables implementation of driver-model regulator uclass
|
||||
features for regulators on ROHM BD71837 and BD71847 in SPL.
|
||||
|
||||
config DM_REGULATOR_DA9063
|
||||
bool "Enable Driver Model for REGULATOR DA9063"
|
||||
depends on DM_REGULATOR && DM_PMIC_DA9063
|
||||
help
|
||||
This config enables implementation of driver-model regulator uclass
|
||||
features for REGULATOR DA9063.
|
||||
The driver implements get/set api for value, enable and mode for all
|
||||
regulators. It also implements the get/set api for current for the
|
||||
buck regulators.
|
||||
|
||||
config SPL_DM_REGULATOR_DA9063
|
||||
bool "Enable Driver Model for REGULATOR DA9063 in SPL"
|
||||
depends on DM_REGULATOR && DM_PMIC_DA9063 && SPL
|
||||
help
|
||||
This config enables implementation of driver-model regulator uclass
|
||||
features for REGULATOR DA9063.
|
||||
The driver implements get/set api for value, enable and mode for all
|
||||
regulators. It also implements the get/set api for current for the
|
||||
buck regulators.
|
||||
|
||||
config DM_REGULATOR_PFUZE100
|
||||
bool "Enable Driver Model for REGULATOR PFUZE100"
|
||||
depends on DM_REGULATOR && DM_PMIC_PFUZE100
|
||||
|
||||
@ -7,6 +7,7 @@
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
|
||||
obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
|
||||
obj-$(CONFIG_REGULATOR_AS3722) += as3722_regulator.o
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
|
||||
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
|
||||
obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
|
||||
obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
|
||||
|
||||
388
drivers/power/regulator/da9063.c
Normal file
388
drivers/power/regulator/da9063.c
Normal file
@ -0,0 +1,388 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2018 Flowbird
|
||||
* Martin Fuzzey <martin.fuzzey@flowbird.group>
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <power/da9063_pmic.h>
|
||||
#include <power/pmic.h>
|
||||
#include <power/regulator.h>
|
||||
|
||||
#define DA9063_BUCK_EN 0x01
|
||||
#define DA9063_LDO_EN 0x01
|
||||
#define DA9063_VBUCK_MASK 0x7F
|
||||
#define DA9063_BUCK_SL 0x80
|
||||
#define DA9063_LDO_SL 0x80
|
||||
|
||||
#define DA9063_VLDO1_MASK 0x3F
|
||||
#define DA9063_VLDO2_MASK 0x3F
|
||||
#define DA9063_VLDO3_MASK 0x7F
|
||||
#define DA9063_VLDO4_MASK 0x7F
|
||||
#define DA9063_VLDO5_MASK 0x3F
|
||||
#define DA9063_VLDO6_MASK 0x3F
|
||||
#define DA9063_VLDO7_MASK 0x3F
|
||||
#define DA9063_VLDO8_MASK 0x3F
|
||||
#define DA9063_VLDO9_MASK 0x3F
|
||||
#define DA9063_VLDO10_MASK 0x3F
|
||||
#define DA9063_VLDO11_MASK 0x3F
|
||||
|
||||
#define DA9063_BUCK_MODE_MASK 0xC0
|
||||
#define DA9063_BUCK_MODE_MANUAL 0x00
|
||||
#define DA9063_BUCK_MODE_SLEEP 0x40
|
||||
#define DA9063_BUCK_MODE_SYNC 0x80
|
||||
#define DA9063_BUCK_MODE_AUTO 0xC0
|
||||
|
||||
#define DA9063_BIO_ILIM_MASK 0x0F
|
||||
#define DA9063_BMEM_ILIM_MASK 0xF0
|
||||
#define DA9063_BPRO_ILIM_MASK 0x0F
|
||||
#define DA9063_BPERI_ILIM_MASK 0xF0
|
||||
#define DA9063_BCORE1_ILIM_MASK 0x0F
|
||||
#define DA9063_BCORE2_ILIM_MASK 0xF0
|
||||
|
||||
struct da9063_reg_info {
|
||||
uint min_uV;
|
||||
uint step_uV;
|
||||
uint max_uV;
|
||||
uint min_uA;
|
||||
uint step_uA;
|
||||
uint max_uA;
|
||||
uint en_reg;
|
||||
uint vsel_reg;
|
||||
uint mode_reg;
|
||||
uint ilim_reg;
|
||||
u8 en_mask;
|
||||
u8 vsel_mask;
|
||||
u8 ilim_mask;
|
||||
const char *dt_node_name;
|
||||
const int *current_limits;
|
||||
};
|
||||
|
||||
struct da9063_priv {
|
||||
const struct da9063_reg_info *reg_info;
|
||||
};
|
||||
|
||||
static struct dm_regulator_mode da9063_ldo_modes[] = {
|
||||
{ .id = DA9063_LDOMODE_SLEEP,
|
||||
.register_value = DA9063_LDO_SL, .name = "SLEEP" },
|
||||
{ .id = DA9063_LDOMODE_NORMAL,
|
||||
.register_value = 0, .name = "NORMAL" },
|
||||
};
|
||||
|
||||
#define DA9063_LDO(regl_name, min_mV, step_mV, max_mV) \
|
||||
.min_uV = (min_mV) * 1000, \
|
||||
.step_uV = (step_mV) * 1000, \
|
||||
.max_uV = (max_mV) * 1000, \
|
||||
.en_reg = DA9063_REG_##regl_name##_CONT, \
|
||||
.en_mask = DA9063_LDO_EN, \
|
||||
.vsel_reg = DA9063_REG_V##regl_name##_A, \
|
||||
.vsel_mask = DA9063_V##regl_name##_MASK, \
|
||||
.mode_reg = DA9063_REG_V##regl_name##_A \
|
||||
|
||||
/* This array is directly indexed so must stay in numerical order */
|
||||
static const struct da9063_reg_info da9063_ldo_info[] = {
|
||||
{ DA9063_LDO(LDO1, 600, 20, 1860) },
|
||||
{ DA9063_LDO(LDO2, 600, 20, 1860) },
|
||||
{ DA9063_LDO(LDO3, 900, 20, 3440) },
|
||||
{ DA9063_LDO(LDO4, 900, 20, 3440) },
|
||||
{ DA9063_LDO(LDO5, 900, 50, 3600) },
|
||||
{ DA9063_LDO(LDO6, 900, 50, 3600) },
|
||||
{ DA9063_LDO(LDO7, 900, 50, 3600) },
|
||||
{ DA9063_LDO(LDO8, 900, 50, 3600) },
|
||||
{ DA9063_LDO(LDO9, 950, 50, 3600) },
|
||||
{ DA9063_LDO(LDO10, 900, 50, 3600) },
|
||||
{ DA9063_LDO(LDO11, 900, 50, 3600) },
|
||||
};
|
||||
|
||||
static struct dm_regulator_mode da9063_buck_modes[] = {
|
||||
{ .id = DA9063_BUCKMODE_SLEEP,
|
||||
.register_value = DA9063_BUCK_MODE_SLEEP, .name = "SLEEP" },
|
||||
{ .id = DA9063_BUCKMODE_SYNC,
|
||||
.register_value = DA9063_BUCK_MODE_SYNC, .name = "SYNC" },
|
||||
{ .id = DA9063_BUCKMODE_AUTO,
|
||||
.register_value = DA9063_BUCK_MODE_AUTO, .name = "AUTO" },
|
||||
};
|
||||
|
||||
#define DA9063_BUCK(regl_name, dt_name, \
|
||||
min_mV, step_mV, max_mV, \
|
||||
min_mA, step_mA, max_mA, _ilim_reg) \
|
||||
.dt_node_name = dt_name, \
|
||||
.min_uV = (min_mV) * 1000, \
|
||||
.step_uV = (step_mV) * 1000, \
|
||||
.max_uV = (max_mV) * 1000, \
|
||||
.min_uA = (min_mA) * 1000, \
|
||||
.step_uA = (step_mA) * 1000, \
|
||||
.max_uA = (max_mA) * 1000, \
|
||||
.en_reg = DA9063_REG_##regl_name##_CONT, \
|
||||
.en_mask = DA9063_BUCK_EN, \
|
||||
.vsel_reg = DA9063_REG_V##regl_name##_A, \
|
||||
.vsel_mask = DA9063_VBUCK_MASK, \
|
||||
.mode_reg = DA9063_REG_##regl_name##_CFG, \
|
||||
.ilim_reg = DA9063_REG_BUCK_ILIM_##_ilim_reg, \
|
||||
.ilim_mask = DA9063_##regl_name##_ILIM_MASK
|
||||
|
||||
static const struct da9063_reg_info da9063_buck_info[] = {
|
||||
/* mV mA */
|
||||
{ DA9063_BUCK(BCORE1, "bcore1", 300, 10, 1570, 500, 100, 2000, C) },
|
||||
{ DA9063_BUCK(BCORE2, "bcore2", 300, 10, 1570, 500, 100, 2000, C) },
|
||||
{ DA9063_BUCK(BPRO, "bpro", 530, 10, 1800, 500, 100, 2000, B) },
|
||||
{ DA9063_BUCK(BMEM, "bmem", 800, 20, 3340, 1500, 100, 3000, A) },
|
||||
{ DA9063_BUCK(BIO, "bio", 800, 20, 3340, 1500, 100, 3000, A) },
|
||||
{ DA9063_BUCK(BPERI, "bperi", 800, 20, 3340, 1500, 100, 3000, B) },
|
||||
};
|
||||
|
||||
static int da9063_get_enable(struct udevice *dev)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, info->en_reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return ret & info->en_mask ? true : false;
|
||||
}
|
||||
|
||||
static int da9063_set_enable(struct udevice *dev, bool enable)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
|
||||
return pmic_clrsetbits(dev->parent, info->en_reg,
|
||||
info->en_mask, enable ? info->en_mask : 0);
|
||||
}
|
||||
|
||||
static int da9063_get_voltage(struct udevice *dev)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int ret;
|
||||
|
||||
ret = pmic_reg_read(dev->parent, info->vsel_reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return info->min_uV + (ret & info->vsel_mask) * info->step_uV;
|
||||
}
|
||||
|
||||
static int da9063_set_voltage(struct udevice *dev, int uV)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
uint sel;
|
||||
|
||||
if (uV < info->min_uV || uV > info->max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
sel = (uV - info->min_uV) / info->step_uV;
|
||||
|
||||
return pmic_clrsetbits(dev->parent, info->vsel_reg,
|
||||
info->vsel_mask, sel);
|
||||
}
|
||||
|
||||
static const struct dm_regulator_mode
|
||||
*da9063_find_mode_by_id(int id,
|
||||
const struct dm_regulator_mode *modes,
|
||||
uint mode_count)
|
||||
{
|
||||
for (; mode_count; mode_count--) {
|
||||
if (modes->id == id)
|
||||
return modes;
|
||||
modes++;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static int ldo_get_mode(struct udevice *dev)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int val;
|
||||
|
||||
val = pmic_reg_read(dev->parent, info->mode_reg);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
if (val & DA9063_LDO_SL)
|
||||
return DA9063_LDOMODE_SLEEP;
|
||||
else
|
||||
return DA9063_LDOMODE_NORMAL;
|
||||
}
|
||||
|
||||
static int ldo_set_mode(struct udevice *dev, int mode_id)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
const struct dm_regulator_mode *mode;
|
||||
|
||||
mode = da9063_find_mode_by_id(mode_id,
|
||||
da9063_ldo_modes,
|
||||
ARRAY_SIZE(da9063_ldo_modes));
|
||||
if (!mode)
|
||||
return -EINVAL;
|
||||
|
||||
return pmic_clrsetbits(dev->parent, info->mode_reg,
|
||||
DA9063_LDO_SL, mode->register_value);
|
||||
}
|
||||
|
||||
static int buck_get_mode(struct udevice *dev)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int i;
|
||||
int val;
|
||||
|
||||
val = pmic_reg_read(dev->parent, info->mode_reg);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
val &= DA9063_BUCK_MODE_MASK;
|
||||
if (val == DA9063_BUCK_MODE_MANUAL) {
|
||||
val = pmic_reg_read(dev->parent, info->vsel_reg);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
if (val & DA9063_BUCK_SL)
|
||||
return DA9063_BUCKMODE_SLEEP;
|
||||
else
|
||||
return DA9063_BUCKMODE_SYNC;
|
||||
}
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(da9063_buck_modes); i++) {
|
||||
if (da9063_buck_modes[i].register_value == val)
|
||||
return da9063_buck_modes[i].id;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int buck_set_mode(struct udevice *dev, int mode_id)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
const struct dm_regulator_mode *mode;
|
||||
|
||||
mode = da9063_find_mode_by_id(mode_id,
|
||||
da9063_buck_modes,
|
||||
ARRAY_SIZE(da9063_buck_modes));
|
||||
if (!mode)
|
||||
return -EINVAL;
|
||||
|
||||
return pmic_clrsetbits(dev->parent, info->mode_reg,
|
||||
DA9063_BUCK_MODE_MASK, mode->register_value);
|
||||
}
|
||||
|
||||
static int buck_get_current_limit(struct udevice *dev)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int val;
|
||||
|
||||
val = pmic_reg_read(dev->parent, info->ilim_reg);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
val &= info->ilim_mask;
|
||||
val >>= (ffs(info->ilim_mask) - 1);
|
||||
|
||||
return info->min_uA + val * info->step_uA;
|
||||
}
|
||||
|
||||
static int buck_set_current_limit(struct udevice *dev, int uA)
|
||||
{
|
||||
const struct da9063_priv *priv = dev->priv;
|
||||
const struct da9063_reg_info *info = priv->reg_info;
|
||||
int val;
|
||||
|
||||
if (uA < info->min_uA || uA > info->max_uA)
|
||||
return -EINVAL;
|
||||
|
||||
val = (uA - info->min_uA) / info->step_uA;
|
||||
val <<= (ffs(info->ilim_mask) - 1);
|
||||
|
||||
return pmic_clrsetbits(dev->parent, info->ilim_reg,
|
||||
info->ilim_mask, val);
|
||||
}
|
||||
|
||||
static int da9063_ldo_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
struct da9063_priv *priv = dev->priv;
|
||||
|
||||
/* LDOs are named numerically in DT so can directly index */
|
||||
if (dev->driver_data < 1 ||
|
||||
dev->driver_data > ARRAY_SIZE(da9063_ldo_info))
|
||||
return -EINVAL;
|
||||
priv->reg_info = &da9063_ldo_info[dev->driver_data - 1];
|
||||
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
uc_pdata->type = REGULATOR_TYPE_LDO;
|
||||
uc_pdata->mode = da9063_ldo_modes;
|
||||
uc_pdata->mode_count = ARRAY_SIZE(da9063_ldo_modes);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int da9063_buck_probe(struct udevice *dev)
|
||||
{
|
||||
struct dm_regulator_uclass_platdata *uc_pdata;
|
||||
struct da9063_priv *priv = dev->priv;
|
||||
int i;
|
||||
|
||||
/* Bucks have names rather than numbers so need to match with DT */
|
||||
for (i = 0; i < ARRAY_SIZE(da9063_buck_info); i++) {
|
||||
const struct da9063_reg_info *info = &da9063_buck_info[i];
|
||||
|
||||
if (!strcmp(info->dt_node_name, dev->name)) {
|
||||
priv->reg_info = info;
|
||||
break;
|
||||
}
|
||||
}
|
||||
if (!priv->reg_info)
|
||||
return -ENODEV;
|
||||
|
||||
uc_pdata = dev_get_uclass_platdata(dev);
|
||||
uc_pdata->type = REGULATOR_TYPE_BUCK;
|
||||
uc_pdata->mode = da9063_buck_modes;
|
||||
uc_pdata->mode_count = ARRAY_SIZE(da9063_buck_modes);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct dm_regulator_ops da9063_ldo_ops = {
|
||||
.get_value = da9063_get_voltage,
|
||||
.set_value = da9063_set_voltage,
|
||||
.get_enable = da9063_get_enable,
|
||||
.set_enable = da9063_set_enable,
|
||||
.get_mode = ldo_get_mode,
|
||||
.set_mode = ldo_set_mode,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(da9063_ldo) = {
|
||||
.name = DA9063_LDO_DRIVER,
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &da9063_ldo_ops,
|
||||
.probe = da9063_ldo_probe,
|
||||
.priv_auto_alloc_size = sizeof(struct da9063_priv),
|
||||
};
|
||||
|
||||
static const struct dm_regulator_ops da9063_buck_ops = {
|
||||
.get_value = da9063_get_voltage,
|
||||
.set_value = da9063_set_voltage,
|
||||
.get_enable = da9063_get_enable,
|
||||
.set_enable = da9063_set_enable,
|
||||
.get_mode = buck_get_mode,
|
||||
.set_mode = buck_set_mode,
|
||||
.get_current = buck_get_current_limit,
|
||||
.set_current = buck_set_current_limit,
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(da9063_buck) = {
|
||||
.name = DA9063_BUCK_DRIVER,
|
||||
.id = UCLASS_REGULATOR,
|
||||
.ops = &da9063_buck_ops,
|
||||
.probe = da9063_buck_probe,
|
||||
.priv_auto_alloc_size = sizeof(struct da9063_priv),
|
||||
};
|
||||
@ -24,11 +24,13 @@
|
||||
#include <linux/bitrev.h>
|
||||
#include <rtc.h>
|
||||
|
||||
#define S35390A_CMD_STATUS1 0x30
|
||||
#define S35390A_CMD_STATUS2 0x31
|
||||
#define S35390A_CMD_TIME1 0x32
|
||||
#define S35390A_CMD_TIME2 0x33
|
||||
#define S35390A_CMD_INT2_REG1 0x35
|
||||
#define S35390A_CHIP_ADDR 0x30
|
||||
|
||||
#define S35390A_CMD_STATUS1 0x0
|
||||
#define S35390A_CMD_STATUS2 0x1
|
||||
#define S35390A_CMD_TIME1 0x2
|
||||
#define S35390A_CMD_TIME2 0x3
|
||||
#define S35390A_CMD_INT2_REG1 0x5
|
||||
|
||||
#define S35390A_BYTE_YEAR 0
|
||||
#define S35390A_BYTE_MONTH 1
|
||||
@ -85,11 +87,10 @@ static int s35392a_rtc_read(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
|
||||
int ret;
|
||||
|
||||
#ifdef CONFIG_DM_RTC
|
||||
/* TODO: we need to tweak the chip address to reg */
|
||||
ret = dm_i2c_read(dev, 0, buf, len);
|
||||
ret = dm_i2c_read(dev, reg, buf, len);
|
||||
#else
|
||||
(void)dev;
|
||||
ret = i2c_read(reg, 0, -1, buf, len);
|
||||
ret = i2c_read(S35390A_CHIP_ADDR | reg, 0, -1, buf, len);
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
@ -100,11 +101,10 @@ static int s35392a_rtc_write(DEV_TYPE *dev, u8 reg, u8 *buf, int len)
|
||||
int ret;
|
||||
|
||||
#ifdef CONFIG_DM_RTC
|
||||
/* TODO: we need to tweak the chip address to reg */
|
||||
ret = dm_i2c_write(dev, 0, buf, 1);
|
||||
ret = dm_i2c_write(dev, reg, buf, len);
|
||||
#else
|
||||
(void)dev;
|
||||
ret = i2c_write(reg, 0, 0, buf, len);
|
||||
ret = i2c_write(S35390A_CHIP_ADDR | reg, 0, 0, buf, len);
|
||||
#endif
|
||||
|
||||
return ret;
|
||||
@ -336,6 +336,13 @@ void rtc_init(void)
|
||||
|
||||
static int s35392a_probe(struct udevice *dev)
|
||||
{
|
||||
#if defined(CONFIG_DM_RTC)
|
||||
/* 3-bit "command", or register, is encoded within the device address.
|
||||
*/
|
||||
i2c_set_chip_offset_len(dev, 0);
|
||||
i2c_set_chip_addr_offset_mask(dev, 0x7);
|
||||
#endif
|
||||
|
||||
s35392a_rtc_init(dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
20
dts/Kconfig
20
dts/Kconfig
@ -314,6 +314,26 @@ config OF_SPL_REMOVE_PROPS
|
||||
can be discarded. This option defines the list of properties to
|
||||
discard.
|
||||
|
||||
config OF_DTB_PROPS_REMOVE
|
||||
bool "Enable removal of device tree properties"
|
||||
depends on OF_CONTROL
|
||||
help
|
||||
Some boards have restricted amount of storage for U-Boot image.
|
||||
If the generated binary doesn't fit into available image storage,
|
||||
the built-in device tree could probably be cut down by removing
|
||||
some not required device tree properties to reduce the image size.
|
||||
Enable this option and define the properties to be removed in the
|
||||
CONFIG_OF_REMOVE_PROPS list. Do not enable this option if you must
|
||||
pass the built-in DTB directly to the kernel!
|
||||
|
||||
config OF_REMOVE_PROPS
|
||||
string "List of device tree properties to drop"
|
||||
depends on OF_DTB_PROPS_REMOVE
|
||||
default "interrupt-parent interrupts" if PINCTRL
|
||||
help
|
||||
Some properties are not used by U-Boot and can be discarded.
|
||||
This option defines the list of properties to discard.
|
||||
|
||||
config SPL_OF_PLATDATA
|
||||
bool "Generate platform data for use in SPL"
|
||||
depends on SPL_OF_CONTROL
|
||||
|
||||
@ -19,8 +19,13 @@ endif
|
||||
$(obj)/dt-spl.dtb: $(DTB) $(objtree)/tools/fdtgrep FORCE
|
||||
$(call if_changed,fdtgrep)
|
||||
|
||||
ifeq ($(CONFIG_OF_DTB_PROPS_REMOVE),y)
|
||||
$(obj)/dt.dtb: $(DTB) $(objtree)/tools/fdtgrep FORCE
|
||||
$(call if_changed,fdt_rm_props)
|
||||
else
|
||||
$(obj)/dt.dtb: $(DTB) FORCE
|
||||
$(call if_changed,shipped)
|
||||
endif
|
||||
|
||||
targets += dt.dtb dt-spl.dtb
|
||||
|
||||
|
||||
320
include/power/da9063_pmic.h
Normal file
320
include/power/da9063_pmic.h
Normal file
@ -0,0 +1,320 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright (C) 2018 Flowbird
|
||||
* Martin Fuzzey <martin.fuzzey@flowbird.group>
|
||||
*/
|
||||
|
||||
#ifndef __DA9063_PMIC_H_
|
||||
#define __DA9063_PMIC_H_
|
||||
|
||||
/* Register definitions below taken from the kernel */
|
||||
|
||||
/* Page selection I2C or SPI always in the beginning of any page. */
|
||||
/* Page 0 : I2C access 0x000 - 0x0FF SPI access 0x000 - 0x07F */
|
||||
/* Page 1 : SPI access 0x080 - 0x0FF */
|
||||
/* Page 2 : I2C access 0x100 - 0x1FF SPI access 0x100 - 0x17F */
|
||||
/* Page 3 : SPI access 0x180 - 0x1FF */
|
||||
#define DA9063_REG_PAGE_CON 0x00
|
||||
|
||||
/* System Control and Event Registers */
|
||||
#define DA9063_REG_STATUS_A 0x01
|
||||
#define DA9063_REG_STATUS_B 0x02
|
||||
#define DA9063_REG_STATUS_C 0x03
|
||||
#define DA9063_REG_STATUS_D 0x04
|
||||
#define DA9063_REG_FAULT_LOG 0x05
|
||||
#define DA9063_REG_EVENT_A 0x06
|
||||
#define DA9063_REG_EVENT_B 0x07
|
||||
#define DA9063_REG_EVENT_C 0x08
|
||||
#define DA9063_REG_EVENT_D 0x09
|
||||
#define DA9063_REG_IRQ_MASK_A 0x0A
|
||||
#define DA9063_REG_IRQ_MASK_B 0x0B
|
||||
#define DA9063_REG_IRQ_MASK_C 0x0C
|
||||
#define DA9063_REG_IRQ_MASK_D 0x0D
|
||||
#define DA9063_REG_CONTROL_A 0x0E
|
||||
#define DA9063_REG_CONTROL_B 0x0F
|
||||
#define DA9063_REG_CONTROL_C 0x10
|
||||
#define DA9063_REG_CONTROL_D 0x11
|
||||
#define DA9063_REG_CONTROL_E 0x12
|
||||
#define DA9063_REG_CONTROL_F 0x13
|
||||
#define DA9063_REG_PD_DIS 0x14
|
||||
|
||||
/* GPIO Control Registers */
|
||||
#define DA9063_REG_GPIO_0_1 0x15
|
||||
#define DA9063_REG_GPIO_2_3 0x16
|
||||
#define DA9063_REG_GPIO_4_5 0x17
|
||||
#define DA9063_REG_GPIO_6_7 0x18
|
||||
#define DA9063_REG_GPIO_8_9 0x19
|
||||
#define DA9063_REG_GPIO_10_11 0x1A
|
||||
#define DA9063_REG_GPIO_12_13 0x1B
|
||||
#define DA9063_REG_GPIO_14_15 0x1C
|
||||
#define DA9063_REG_GPIO_MODE0_7 0x1D
|
||||
#define DA9063_REG_GPIO_MODE8_15 0x1E
|
||||
#define DA9063_REG_SWITCH_CONT 0x1F
|
||||
|
||||
/* Regulator Control Registers */
|
||||
#define DA9063_REG_BCORE2_CONT 0x20
|
||||
#define DA9063_REG_BCORE1_CONT 0x21
|
||||
#define DA9063_REG_BPRO_CONT 0x22
|
||||
#define DA9063_REG_BMEM_CONT 0x23
|
||||
#define DA9063_REG_BIO_CONT 0x24
|
||||
#define DA9063_REG_BPERI_CONT 0x25
|
||||
#define DA9063_REG_LDO1_CONT 0x26
|
||||
#define DA9063_REG_LDO2_CONT 0x27
|
||||
#define DA9063_REG_LDO3_CONT 0x28
|
||||
#define DA9063_REG_LDO4_CONT 0x29
|
||||
#define DA9063_REG_LDO5_CONT 0x2A
|
||||
#define DA9063_REG_LDO6_CONT 0x2B
|
||||
#define DA9063_REG_LDO7_CONT 0x2C
|
||||
#define DA9063_REG_LDO8_CONT 0x2D
|
||||
#define DA9063_REG_LDO9_CONT 0x2E
|
||||
#define DA9063_REG_LDO10_CONT 0x2F
|
||||
#define DA9063_REG_LDO11_CONT 0x30
|
||||
#define DA9063_REG_SUPPLIES 0x31
|
||||
#define DA9063_REG_DVC_1 0x32
|
||||
#define DA9063_REG_DVC_2 0x33
|
||||
|
||||
/* GP-ADC Control Registers */
|
||||
#define DA9063_REG_ADC_MAN 0x34
|
||||
#define DA9063_REG_ADC_CONT 0x35
|
||||
#define DA9063_REG_VSYS_MON 0x36
|
||||
#define DA9063_REG_ADC_RES_L 0x37
|
||||
#define DA9063_REG_ADC_RES_H 0x38
|
||||
#define DA9063_REG_VSYS_RES 0x39
|
||||
#define DA9063_REG_ADCIN1_RES 0x3A
|
||||
#define DA9063_REG_ADCIN2_RES 0x3B
|
||||
#define DA9063_REG_ADCIN3_RES 0x3C
|
||||
#define DA9063_REG_MON_A8_RES 0x3D
|
||||
#define DA9063_REG_MON_A9_RES 0x3E
|
||||
#define DA9063_REG_MON_A10_RES 0x3F
|
||||
|
||||
/* RTC Calendar and Alarm Registers */
|
||||
#define DA9063_REG_COUNT_S 0x40
|
||||
#define DA9063_REG_COUNT_MI 0x41
|
||||
#define DA9063_REG_COUNT_H 0x42
|
||||
#define DA9063_REG_COUNT_D 0x43
|
||||
#define DA9063_REG_COUNT_MO 0x44
|
||||
#define DA9063_REG_COUNT_Y 0x45
|
||||
|
||||
#define DA9063_AD_REG_ALARM_MI 0x46
|
||||
#define DA9063_AD_REG_ALARM_H 0x47
|
||||
#define DA9063_AD_REG_ALARM_D 0x48
|
||||
#define DA9063_AD_REG_ALARM_MO 0x49
|
||||
#define DA9063_AD_REG_ALARM_Y 0x4A
|
||||
#define DA9063_AD_REG_SECOND_A 0x4B
|
||||
#define DA9063_AD_REG_SECOND_B 0x4C
|
||||
#define DA9063_AD_REG_SECOND_C 0x4D
|
||||
#define DA9063_AD_REG_SECOND_D 0x4E
|
||||
|
||||
#define DA9063_BB_REG_ALARM_S 0x46
|
||||
#define DA9063_BB_REG_ALARM_MI 0x47
|
||||
#define DA9063_BB_REG_ALARM_H 0x48
|
||||
#define DA9063_BB_REG_ALARM_D 0x49
|
||||
#define DA9063_BB_REG_ALARM_MO 0x4A
|
||||
#define DA9063_BB_REG_ALARM_Y 0x4B
|
||||
#define DA9063_BB_REG_SECOND_A 0x4C
|
||||
#define DA9063_BB_REG_SECOND_B 0x4D
|
||||
#define DA9063_BB_REG_SECOND_C 0x4E
|
||||
#define DA9063_BB_REG_SECOND_D 0x4F
|
||||
|
||||
#define DA9063_REG_HOLE_1 {0x50, 0x7F}
|
||||
|
||||
/* Sequencer Control Registers */
|
||||
#define DA9063_REG_SEQ 0x81
|
||||
#define DA9063_REG_SEQ_TIMER 0x82
|
||||
#define DA9063_REG_ID_2_1 0x83
|
||||
#define DA9063_REG_ID_4_3 0x84
|
||||
#define DA9063_REG_ID_6_5 0x85
|
||||
#define DA9063_REG_ID_8_7 0x86
|
||||
#define DA9063_REG_ID_10_9 0x87
|
||||
#define DA9063_REG_ID_12_11 0x88
|
||||
#define DA9063_REG_ID_14_13 0x89
|
||||
#define DA9063_REG_ID_16_15 0x8A
|
||||
#define DA9063_REG_ID_18_17 0x8B
|
||||
#define DA9063_REG_ID_20_19 0x8C
|
||||
#define DA9063_REG_ID_22_21 0x8D
|
||||
#define DA9063_REG_ID_24_23 0x8E
|
||||
#define DA9063_REG_ID_26_25 0x8F
|
||||
#define DA9063_REG_ID_28_27 0x90
|
||||
#define DA9063_REG_ID_30_29 0x91
|
||||
#define DA9063_REG_ID_32_31 0x92
|
||||
#define DA9063_REG_SEQ_A 0x95
|
||||
#define DA9063_REG_SEQ_B 0x96
|
||||
#define DA9063_REG_WAIT 0x97
|
||||
#define DA9063_REG_EN_32K 0x98
|
||||
#define DA9063_REG_RESET 0x99
|
||||
|
||||
/* Regulator Setting Registers */
|
||||
#define DA9063_REG_BUCK_ILIM_A 0x9A
|
||||
#define DA9063_REG_BUCK_ILIM_B 0x9B
|
||||
#define DA9063_REG_BUCK_ILIM_C 0x9C
|
||||
#define DA9063_REG_BCORE2_CFG 0x9D
|
||||
#define DA9063_REG_BCORE1_CFG 0x9E
|
||||
#define DA9063_REG_BPRO_CFG 0x9F
|
||||
#define DA9063_REG_BIO_CFG 0xA0
|
||||
#define DA9063_REG_BMEM_CFG 0xA1
|
||||
#define DA9063_REG_BPERI_CFG 0xA2
|
||||
#define DA9063_REG_VBCORE2_A 0xA3
|
||||
#define DA9063_REG_VBCORE1_A 0xA4
|
||||
#define DA9063_REG_VBPRO_A 0xA5
|
||||
#define DA9063_REG_VBMEM_A 0xA6
|
||||
#define DA9063_REG_VBIO_A 0xA7
|
||||
#define DA9063_REG_VBPERI_A 0xA8
|
||||
#define DA9063_REG_VLDO1_A 0xA9
|
||||
#define DA9063_REG_VLDO2_A 0xAA
|
||||
#define DA9063_REG_VLDO3_A 0xAB
|
||||
#define DA9063_REG_VLDO4_A 0xAC
|
||||
#define DA9063_REG_VLDO5_A 0xAD
|
||||
#define DA9063_REG_VLDO6_A 0xAE
|
||||
#define DA9063_REG_VLDO7_A 0xAF
|
||||
#define DA9063_REG_VLDO8_A 0xB0
|
||||
#define DA9063_REG_VLDO9_A 0xB1
|
||||
#define DA9063_REG_VLDO10_A 0xB2
|
||||
#define DA9063_REG_VLDO11_A 0xB3
|
||||
#define DA9063_REG_VBCORE2_B 0xB4
|
||||
#define DA9063_REG_VBCORE1_B 0xB5
|
||||
#define DA9063_REG_VBPRO_B 0xB6
|
||||
#define DA9063_REG_VBMEM_B 0xB7
|
||||
#define DA9063_REG_VBIO_B 0xB8
|
||||
#define DA9063_REG_VBPERI_B 0xB9
|
||||
#define DA9063_REG_VLDO1_B 0xBA
|
||||
#define DA9063_REG_VLDO2_B 0xBB
|
||||
#define DA9063_REG_VLDO3_B 0xBC
|
||||
#define DA9063_REG_VLDO4_B 0xBD
|
||||
#define DA9063_REG_VLDO5_B 0xBE
|
||||
#define DA9063_REG_VLDO6_B 0xBF
|
||||
#define DA9063_REG_VLDO7_B 0xC0
|
||||
#define DA9063_REG_VLDO8_B 0xC1
|
||||
#define DA9063_REG_VLDO9_B 0xC2
|
||||
#define DA9063_REG_VLDO10_B 0xC3
|
||||
#define DA9063_REG_VLDO11_B 0xC4
|
||||
|
||||
/* Backup Battery Charger Control Register */
|
||||
#define DA9063_REG_BBAT_CONT 0xC5
|
||||
|
||||
/* GPIO PWM (LED) */
|
||||
#define DA9063_REG_GPO11_LED 0xC6
|
||||
#define DA9063_REG_GPO14_LED 0xC7
|
||||
#define DA9063_REG_GPO15_LED 0xC8
|
||||
|
||||
/* GP-ADC Threshold Registers */
|
||||
#define DA9063_REG_ADC_CFG 0xC9
|
||||
#define DA9063_REG_AUTO1_HIGH 0xCA
|
||||
#define DA9063_REG_AUTO1_LOW 0xCB
|
||||
#define DA9063_REG_AUTO2_HIGH 0xCC
|
||||
#define DA9063_REG_AUTO2_LOW 0xCD
|
||||
#define DA9063_REG_AUTO3_HIGH 0xCE
|
||||
#define DA9063_REG_AUTO3_LOW 0xCF
|
||||
|
||||
#define DA9063_REG_HOLE_2 {0xD0, 0xFF}
|
||||
|
||||
/* DA9063 Configuration registers */
|
||||
/* OTP */
|
||||
#define DA9063_REG_OTP_COUNT 0x101
|
||||
#define DA9063_REG_OTP_ADDR 0x102
|
||||
#define DA9063_REG_OTP_DATA 0x103
|
||||
|
||||
/* Customer Trim and Configuration */
|
||||
#define DA9063_REG_T_OFFSET 0x104
|
||||
#define DA9063_REG_INTERFACE 0x105
|
||||
#define DA9063_REG_CONFIG_A 0x106
|
||||
#define DA9063_REG_CONFIG_B 0x107
|
||||
#define DA9063_REG_CONFIG_C 0x108
|
||||
#define DA9063_REG_CONFIG_D 0x109
|
||||
#define DA9063_REG_CONFIG_E 0x10A
|
||||
#define DA9063_REG_CONFIG_F 0x10B
|
||||
#define DA9063_REG_CONFIG_G 0x10C
|
||||
#define DA9063_REG_CONFIG_H 0x10D
|
||||
#define DA9063_REG_CONFIG_I 0x10E
|
||||
#define DA9063_REG_CONFIG_J 0x10F
|
||||
#define DA9063_REG_CONFIG_K 0x110
|
||||
#define DA9063_REG_CONFIG_L 0x111
|
||||
|
||||
#define DA9063_AD_REG_MON_REG_1 0x112
|
||||
#define DA9063_AD_REG_MON_REG_2 0x113
|
||||
#define DA9063_AD_REG_MON_REG_3 0x114
|
||||
#define DA9063_AD_REG_MON_REG_4 0x115
|
||||
#define DA9063_AD_REG_MON_REG_5 0x116
|
||||
#define DA9063_AD_REG_MON_REG_6 0x117
|
||||
#define DA9063_AD_REG_TRIM_CLDR 0x118
|
||||
|
||||
#define DA9063_AD_REG_GP_ID_0 0x119
|
||||
#define DA9063_AD_REG_GP_ID_1 0x11A
|
||||
#define DA9063_AD_REG_GP_ID_2 0x11B
|
||||
#define DA9063_AD_REG_GP_ID_3 0x11C
|
||||
#define DA9063_AD_REG_GP_ID_4 0x11D
|
||||
#define DA9063_AD_REG_GP_ID_5 0x11E
|
||||
#define DA9063_AD_REG_GP_ID_6 0x11F
|
||||
#define DA9063_AD_REG_GP_ID_7 0x120
|
||||
#define DA9063_AD_REG_GP_ID_8 0x121
|
||||
#define DA9063_AD_REG_GP_ID_9 0x122
|
||||
#define DA9063_AD_REG_GP_ID_10 0x123
|
||||
#define DA9063_AD_REG_GP_ID_11 0x124
|
||||
#define DA9063_AD_REG_GP_ID_12 0x125
|
||||
#define DA9063_AD_REG_GP_ID_13 0x126
|
||||
#define DA9063_AD_REG_GP_ID_14 0x127
|
||||
#define DA9063_AD_REG_GP_ID_15 0x128
|
||||
#define DA9063_AD_REG_GP_ID_16 0x129
|
||||
#define DA9063_AD_REG_GP_ID_17 0x12A
|
||||
#define DA9063_AD_REG_GP_ID_18 0x12B
|
||||
#define DA9063_AD_REG_GP_ID_19 0x12C
|
||||
|
||||
#define DA9063_BB_REG_CONFIG_M 0x112
|
||||
#define DA9063_BB_REG_CONFIG_N 0x113
|
||||
|
||||
#define DA9063_BB_REG_MON_REG_1 0x114
|
||||
#define DA9063_BB_REG_MON_REG_2 0x115
|
||||
#define DA9063_BB_REG_MON_REG_3 0x116
|
||||
#define DA9063_BB_REG_MON_REG_4 0x117
|
||||
#define DA9063_BB_REG_MON_REG_5 0x11E
|
||||
#define DA9063_BB_REG_MON_REG_6 0x11F
|
||||
#define DA9063_BB_REG_TRIM_CLDR 0x120
|
||||
/* General Purpose Registers */
|
||||
#define DA9063_BB_REG_GP_ID_0 0x121
|
||||
#define DA9063_BB_REG_GP_ID_1 0x122
|
||||
#define DA9063_BB_REG_GP_ID_2 0x123
|
||||
#define DA9063_BB_REG_GP_ID_3 0x124
|
||||
#define DA9063_BB_REG_GP_ID_4 0x125
|
||||
#define DA9063_BB_REG_GP_ID_5 0x126
|
||||
#define DA9063_BB_REG_GP_ID_6 0x127
|
||||
#define DA9063_BB_REG_GP_ID_7 0x128
|
||||
#define DA9063_BB_REG_GP_ID_8 0x129
|
||||
#define DA9063_BB_REG_GP_ID_9 0x12A
|
||||
#define DA9063_BB_REG_GP_ID_10 0x12B
|
||||
#define DA9063_BB_REG_GP_ID_11 0x12C
|
||||
#define DA9063_BB_REG_GP_ID_12 0x12D
|
||||
#define DA9063_BB_REG_GP_ID_13 0x12E
|
||||
#define DA9063_BB_REG_GP_ID_14 0x12F
|
||||
#define DA9063_BB_REG_GP_ID_15 0x130
|
||||
#define DA9063_BB_REG_GP_ID_16 0x131
|
||||
#define DA9063_BB_REG_GP_ID_17 0x132
|
||||
#define DA9063_BB_REG_GP_ID_18 0x133
|
||||
#define DA9063_BB_REG_GP_ID_19 0x134
|
||||
|
||||
/* 0x135 - 0x13f are readable, but not documented */
|
||||
#define DA9063_REG_HOLE_3 {0x140, 0x17F}
|
||||
|
||||
/* Chip ID and variant */
|
||||
#define DA9063_REG_CHIP_ID 0x181
|
||||
#define DA9063_REG_CHIP_VARIANT 0x182
|
||||
#define DA9063_REG_CUSTOMER_ID 0x183
|
||||
#define DA9063_REG_CONFIG_ID 0x184
|
||||
|
||||
#define DA9063_NUM_OF_REGS (DA9063_REG_CONFIG_ID + 1)
|
||||
|
||||
/* Drivers name */
|
||||
#define DA9063_LDO_DRIVER "da9063_ldo"
|
||||
#define DA9063_BUCK_DRIVER "da9063_buck"
|
||||
|
||||
/* Regulator modes */
|
||||
enum {
|
||||
DA9063_LDOMODE_SLEEP,
|
||||
DA9063_LDOMODE_NORMAL
|
||||
};
|
||||
|
||||
enum {
|
||||
DA9063_BUCKMODE_SLEEP,
|
||||
DA9063_BUCKMODE_SYNC,
|
||||
DA9063_BUCKMODE_AUTO,
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -544,3 +544,11 @@ quiet_cmd_fdtgrep = FDTGREP $@
|
||||
$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
|
||||
-P u-boot,dm-pre-reloc -P u-boot,dm-spl -P u-boot,dm-tpl \
|
||||
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
|
||||
|
||||
# fdt_rm_props
|
||||
# ---------------------------------------------------------------------------
|
||||
# Pass the original device tree file through fdtgrep. This removes various
|
||||
# unused properties. The output is typically a smaller device tree file.
|
||||
quiet_cmd_fdt_rm_props = FDTGREP $@
|
||||
cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
|
||||
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))
|
||||
|
||||
Loading…
Reference in New Issue
Block a user