diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi index 6a3fbc9093..4f41f62738 100644 --- a/arch/arm/dts/bcm63158.dtsi +++ b/arch/arm/dts/bcm63158.dtsi @@ -98,5 +98,85 @@ compatible = "wdt-reboot"; wdt = <&wdt1>; }; + + gpio0: gpio-controller@0xff800500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800500 0x0 0x4>, + <0x0 0xff800520 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio1: gpio-controller@0xff800504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800504 0x0 0x4>, + <0x0 0xff800524 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio2: gpio-controller@0xff800508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800508 0x0 0x4>, + <0x0 0xff800528 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio3: gpio-controller@0xff80050c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff80050c 0x0 0x4>, + <0x0 0xff80052c 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio4: gpio-controller@0xff800510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800510 0x0 0x4>, + <0x0 0xff800530 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio5: gpio-controller@0xff800514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800514 0x0 0x4>, + <0x0 0xff800534 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio6: gpio-controller@0xff800518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800518 0x0 0x4>, + <0x0 0xff800538 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio7: gpio-controller@0xff80051c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff80051c 0x0 0x4>, + <0x0 0xff80053c 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/dts/bcm6858.dtsi b/arch/arm/dts/bcm6858.dtsi index 23b80c67a6..5d5e64db08 100644 --- a/arch/arm/dts/bcm6858.dtsi +++ b/arch/arm/dts/bcm6858.dtsi @@ -98,5 +98,85 @@ compatible = "wdt-reboot"; wdt = <&wdt1>; }; + + gpio0: gpio-controller@0xff800500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800500 0x0 0x4>, + <0x0 0xff800520 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio1: gpio-controller@0xff800504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800504 0x0 0x4>, + <0x0 0xff800524 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio2: gpio-controller@0xff800508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800508 0x0 0x4>, + <0x0 0xff800528 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio3: gpio-controller@0xff80050c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff80050c 0x0 0x4>, + <0x0 0xff80052c 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio4: gpio-controller@0xff800510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800510 0x0 0x4>, + <0x0 0xff800530 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio5: gpio-controller@0xff800514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800514 0x0 0x4>, + <0x0 0xff800534 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio6: gpio-controller@0xff800518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff800518 0x0 0x4>, + <0x0 0xff800538 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio7: gpio-controller@0xff80051c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x0 0xff80051c 0x0 0x4>, + <0x0 0xff80053c 0x0 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/dts/bcm963158.dts b/arch/arm/dts/bcm963158.dts index dc5afb5a24..b5c825b052 100644 --- a/arch/arm/dts/bcm963158.dts +++ b/arch/arm/dts/bcm963158.dts @@ -29,3 +29,35 @@ u-boot,dm-pre-reloc; status = "okay"; }; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&gpio6 { + status = "okay"; +}; + +&gpio7 { + status = "okay"; +}; diff --git a/arch/arm/dts/bcm968580xref.dts b/arch/arm/dts/bcm968580xref.dts index 0c59f94710..15febb030f 100644 --- a/arch/arm/dts/bcm968580xref.dts +++ b/arch/arm/dts/bcm968580xref.dts @@ -29,3 +29,35 @@ u-boot,dm-pre-reloc; status = "okay"; }; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&gpio6 { + status = "okay"; +}; + +&gpio7 { + status = "okay"; +}; diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 3039e66bf9..992a84152c 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -1,5 +1,6 @@ #if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) && \ - !defined(CONFIG_ARCH_K3) + !defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) && \ + !defined(CONFIG_ARCH_BCM63158) #include #endif #include diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile index 665d3cc8c1..3522e6cdc8 100644 --- a/arch/mips/dts/Makefile +++ b/arch/mips/dts/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_MT7620) += \ linkit-smart-7688.dtb dtb-$(CONFIG_TARGET_AP121) += ap121.dtb dtb-$(CONFIG_TARGET_AP143) += ap143.dtb +dtb-$(CONFIG_TARGET_AP152) += ap152.dtb dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb dtb-$(CONFIG_TARGET_MALTA) += mti,malta.dtb dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb diff --git a/arch/mips/dts/ap143.dts b/arch/mips/dts/ap143.dts index 6aedd87db9..2e23225f12 100644 --- a/arch/mips/dts/ap143.dts +++ b/arch/mips/dts/ap143.dts @@ -40,3 +40,8 @@ reg = <0>; }; }; + +&gmac1 { + status = "okay"; + phy-mode = "rgmii"; +}; diff --git a/arch/mips/dts/ap152.dts b/arch/mips/dts/ap152.dts new file mode 100644 index 0000000000..1722290c73 --- /dev/null +++ b/arch/mips/dts/ap152.dts @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Rosy Song + */ + +/dts-v1/; +#include "qca956x.dtsi" + +/ { + model = "AP152 Reference Board"; + compatible = "qca,ap152", "qca,qca956x"; + + aliases { + spi0 = &spi0; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&gmac0 { + phy-mode = "sgmii"; + status = "okay"; +}; + +&xtal { + clock-frequency = <25000000>; +}; + +&uart0 { + clock-frequency = <25000000>; + status = "okay"; +}; + +&spi0 { + spi-max-frequency = <25000000>; + status = "okay"; + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-flash"; + memory-map = <0x9f000000 0x01000000>; + spi-max-frequency = <25000000>; + reg = <0>; + }; +}; diff --git a/arch/mips/dts/brcm,bcm6838.dtsi b/arch/mips/dts/brcm,bcm6838.dtsi index b6f9559147..c060802e8a 100644 --- a/arch/mips/dts/brcm,bcm6838.dtsi +++ b/arch/mips/dts/brcm,bcm6838.dtsi @@ -98,5 +98,32 @@ status = "disabled"; }; + + gpio_lo: gpio-controller@14e00100 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x14e00100 0x4>, <0x14e0012c 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio_mid0: gpio-controller@14e00104 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x14e00104 0x4>, <0x14e00130 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; + + gpio_mid1: gpio-controller@14e00108 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x14e00108 0x4>, <0x14e00134 0x4>; + gpio-controller; + #gpio-cells = <2>; + + status = "disabled"; + }; }; }; diff --git a/arch/mips/dts/brcm,bcm968380gerg.dts b/arch/mips/dts/brcm,bcm968380gerg.dts index 513045ee05..98471e3894 100644 --- a/arch/mips/dts/brcm,bcm968380gerg.dts +++ b/arch/mips/dts/brcm,bcm968380gerg.dts @@ -38,3 +38,15 @@ label = "bcm968380gerg:green:usb"; }; }; + +&gpio_lo { + status = "okay"; +}; + +&gpio_mid0 { + status = "okay"; +}; + +&gpio_mid1 { + status = "okay"; +}; diff --git a/arch/mips/dts/gardena-smart-gateway-mt7688.dts b/arch/mips/dts/gardena-smart-gateway-mt7688.dts index 75f6037e96..897064dd9c 100644 --- a/arch/mips/dts/gardena-smart-gateway-mt7688.dts +++ b/arch/mips/dts/gardena-smart-gateway-mt7688.dts @@ -10,7 +10,7 @@ / { compatible = "gardena,smart-gateway-mt7688", "ralink,mt7628a-soc"; - model = "Gardena smart-Gateway-MT7688"; + model = "GARDENA smart Gateway (MT7688)"; aliases { serial0 = &uart0; diff --git a/arch/mips/dts/jr2_pcb110.dts b/arch/mips/dts/jr2_pcb110.dts index ddc30ff76a..4a5a5848b9 100644 --- a/arch/mips/dts/jr2_pcb110.dts +++ b/arch/mips/dts/jr2_pcb110.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mscc,jr2.dtsi" +#include / { model = "Jaguar2 Cu8-Sfp16 PCB110 Reference Board"; @@ -72,3 +73,78 @@ sgpio-ports = <0x3f00ffff>; gpio-ranges = <&sgpio2 0 0 96>; }; + +&mdio1 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phys = <&serdes_hsio 0 SERDES1G(1) PHY_MODE_SGMII>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + phys = <&serdes_hsio 1 SERDES1G(2) PHY_MODE_SGMII>; + }; + port2: port@2 { + reg = <2>; + phy-handle = <&phy2>; + phys = <&serdes_hsio 2 SERDES1G(3) PHY_MODE_SGMII>; + }; + port3: port@3 { + reg = <3>; + phy-handle = <&phy3>; + phys = <&serdes_hsio 3 SERDES1G(4) PHY_MODE_SGMII>; + }; + port4: port@4 { + reg = <4>; + phy-handle = <&phy4>; + phys = <&serdes_hsio 4 SERDES1G(5) PHY_MODE_SGMII>; + }; + port5: port@5 { + reg = <5>; + phy-handle = <&phy5>; + phys = <&serdes_hsio 5 SERDES1G(6) PHY_MODE_SGMII>; + }; + port6: port@6 { + reg = <6>; + phy-handle = <&phy6>; + phys = <&serdes_hsio 6 SERDES1G(7) PHY_MODE_SGMII>; + }; + port7: port@7 { + reg = <7>; + phy-handle = <&phy7>; + phys = <&serdes_hsio 7 SERDES1G(8) PHY_MODE_SGMII>; + }; + }; +}; diff --git a/arch/mips/dts/jr2_pcb111.dts b/arch/mips/dts/jr2_pcb111.dts index 4d411b6dc4..f37ebc7601 100644 --- a/arch/mips/dts/jr2_pcb111.dts +++ b/arch/mips/dts/jr2_pcb111.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mscc,jr2.dtsi" +#include / { model = "Jaguar2 Cu48 PCB111 Reference Board"; @@ -72,3 +73,402 @@ sgpio-ports = <0xff000000>; gpio-ranges = <&sgpio2 0 0 96>; }; + +&mdio1 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + }; + phy8: ethernet-phy@8 { + reg = <8>; + }; + phy9: ethernet-phy@9 { + reg = <9>; + }; + phy10: ethernet-phy@10 { + reg = <10>; + }; + phy11: ethernet-phy@11 { + reg = <11>; + }; + phy12: ethernet-phy@12 { + reg = <12>; + }; + phy13: ethernet-phy@13 { + reg = <13>; + }; + phy14: ethernet-phy@14 { + reg = <14>; + }; + phy15: ethernet-phy@15 { + reg = <15>; + }; + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; + phy20: ethernet-phy@20 { + reg = <20>; + }; + phy21: ethernet-phy@21 { + reg = <21>; + }; + phy22: ethernet-phy@22 { + reg = <22>; + }; + phy23: ethernet-phy@23 { + reg = <23>; + }; +}; + +&mdio2 { + status = "okay"; + + phy24: ethernet-phy@24 { + reg = <0>; + }; + phy25: ethernet-phy@25 { + reg = <1>; + }; + phy26: ethernet-phy@26 { + reg = <2>; + }; + phy27: ethernet-phy@27 { + reg = <3>; + }; + phy28: ethernet-phy@28 { + reg = <4>; + }; + phy29: ethernet-phy@29 { + reg = <5>; + }; + phy30: ethernet-phy@30 { + reg = <6>; + }; + phy31: ethernet-phy@31 { + reg = <7>; + }; + phy32: ethernet-phy@32 { + reg = <8>; + }; + phy33: ethernet-phy@33 { + reg = <9>; + }; + phy34: ethernet-phy@34 { + reg = <10>; + }; + phy35: ethernet-phy@35 { + reg = <11>; + }; + phy36: ethernet-phy@36 { + reg = <12>; + }; + phy37: ethernet-phy@37 { + reg = <13>; + }; + phy38: ethernet-phy@38 { + reg = <14>; + }; + phy39: ethernet-phy@39 { + reg = <15>; + }; + phy40: ethernet-phy@40 { + reg = <16>; + }; + phy41: ethernet-phy@41 { + reg = <17>; + }; + phy42: ethernet-phy@42 { + reg = <18>; + }; + phy43: ethernet-phy@43 { + reg = <19>; + }; + phy44: ethernet-phy@44 { + reg = <20>; + }; + phy45: ethernet-phy@45 { + reg = <21>; + }; + phy46: ethernet-phy@46 { + reg = <22>; + }; + phy47: ethernet-phy@47 { + reg = <23>; + }; +}; + +&switch { + ethernet-ports { + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phys = <&serdes_hsio 0 SERDES6G(4) PHY_MODE_QSGMII>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + phys = <&serdes_hsio 1 0xff PHY_MODE_QSGMII>; + }; + port2: port@2 { + reg = <2>; + phy-handle = <&phy2>; + phys = <&serdes_hsio 2 0xff PHY_MODE_QSGMII>; + }; + port3: port@3 { + reg = <3>; + phy-handle = <&phy3>; + phys = <&serdes_hsio 3 0xff PHY_MODE_QSGMII>; + }; + port4: port@4 { + reg = <4>; + phy-handle = <&phy4>; + phys = <&serdes_hsio 4 SERDES6G(5) PHY_MODE_QSGMII>; + }; + port5: port@5 { + reg = <5>; + phy-handle = <&phy5>; + phys = <&serdes_hsio 5 0xff PHY_MODE_QSGMII>; + }; + port6: port@6 { + reg = <6>; + phy-handle = <&phy6>; + phys = <&serdes_hsio 6 0xff PHY_MODE_QSGMII>; + }; + port7: port@7 { + reg = <7>; + phy-handle = <&phy7>; + phys = <&serdes_hsio 7 0xff PHY_MODE_QSGMII>; + }; + port8: port@8 { + reg = <8>; + phy-handle = <&phy8>; + phys = <&serdes_hsio 8 SERDES6G(6) PHY_MODE_QSGMII>; + }; + port9: port@9 { + reg = <9>; + phy-handle = <&phy9>; + phys = <&serdes_hsio 9 0xff PHY_MODE_QSGMII>; + }; + port10: port@10 { + reg = <10>; + phy-handle = <&phy10>; + phys = <&serdes_hsio 10 0xff PHY_MODE_QSGMII>; + }; + port11: port@11 { + reg = <11>; + phy-handle = <&phy11>; + phys = <&serdes_hsio 11 0xff PHY_MODE_QSGMII>; + }; + port12: port@12 { + reg = <12>; + phy-handle = <&phy12>; + phys = <&serdes_hsio 12 SERDES6G(7) PHY_MODE_QSGMII>; + }; + port13: port@13 { + reg = <13>; + phy-handle = <&phy13>; + phys = <&serdes_hsio 13 0xff PHY_MODE_QSGMII>; + }; + port14: port@14 { + reg = <14>; + phy-handle = <&phy14>; + phys = <&serdes_hsio 14 0xff PHY_MODE_QSGMII>; + }; + port15: port@15 { + reg = <15>; + phy-handle = <&phy15>; + phys = <&serdes_hsio 15 0xff PHY_MODE_QSGMII>; + }; + port16: port@16 { + reg = <16>; + phy-handle = <&phy16>; + phys = <&serdes_hsio 16 SERDES6G(8) PHY_MODE_QSGMII>; + }; + port17: port@17 { + reg = <17>; + phy-handle = <&phy17>; + phys = <&serdes_hsio 17 0xff PHY_MODE_QSGMII>; + }; + port18: port@18 { + reg = <18>; + phy-handle = <&phy18>; + phys = <&serdes_hsio 18 0xff PHY_MODE_QSGMII>; + }; + port19: port@19 { + reg = <19>; + phy-handle = <&phy19>; + phys = <&serdes_hsio 19 0xff PHY_MODE_QSGMII>; + }; + port20: port@20 { + reg = <20>; + phy-handle = <&phy20>; + phys = <&serdes_hsio 20 SERDES6G(9) PHY_MODE_QSGMII>; + }; + port21: port@21 { + reg = <21>; + phy-handle = <&phy21>; + phys = <&serdes_hsio 21 0xff PHY_MODE_QSGMII>; + }; + port22: port@22 { + reg = <22>; + phy-handle = <&phy22>; + phys = <&serdes_hsio 22 0xff PHY_MODE_QSGMII>; + }; + port23: port@23 { + reg = <23>; + phy-handle = <&phy23>; + phys = <&serdes_hsio 23 0xff PHY_MODE_QSGMII>; + }; + port24: port@24 { + reg = <24>; + phy-handle = <&phy24>; + phys = <&serdes_hsio 24 SERDES6G(10) PHY_MODE_QSGMII>; + }; + port25: port@25 { + reg = <25>; + phy-handle = <&phy25>; + phys = <&serdes_hsio 25 0xff PHY_MODE_QSGMII>; + }; + port26: port@26 { + reg = <26>; + phy-handle = <&phy26>; + phys = <&serdes_hsio 26 0xff PHY_MODE_QSGMII>; + }; + port27: port@27 { + reg = <27>; + phy-handle = <&phy27>; + phys = <&serdes_hsio 27 0xff PHY_MODE_QSGMII>; + }; + port28: port@28 { + reg = <28>; + phy-handle = <&phy28>; + phys = <&serdes_hsio 28 SERDES6G(11) PHY_MODE_QSGMII>; + }; + port29: port@29 { + reg = <29>; + phy-handle = <&phy29>; + phys = <&serdes_hsio 29 0xff PHY_MODE_QSGMII>; + }; + port30: port@30 { + reg = <30>; + phy-handle = <&phy30>; + phys = <&serdes_hsio 30 0xff PHY_MODE_QSGMII>; + }; + port31: port@31 { + reg = <31>; + phy-handle = <&phy31>; + phys = <&serdes_hsio 31 0xff PHY_MODE_QSGMII>; + }; + port32: port@32 { + reg = <32>; + phy-handle = <&phy32>; + phys = <&serdes_hsio 32 SERDES6G(12) PHY_MODE_QSGMII>; + }; + port33: port@33 { + reg = <33>; + phy-handle = <&phy33>; + phys = <&serdes_hsio 33 0xff PHY_MODE_QSGMII>; + }; + port34: port@34 { + reg = <34>; + phy-handle = <&phy34>; + phys = <&serdes_hsio 34 0xff PHY_MODE_QSGMII>; + }; + port35: port@35 { + reg = <35>; + phy-handle = <&phy35>; + phys = <&serdes_hsio 35 0xff PHY_MODE_QSGMII>; + }; + port36: port@36 { + reg = <36>; + phy-handle = <&phy36>; + phys = <&serdes_hsio 36 SERDES6G(13) PHY_MODE_QSGMII>; + }; + port37: port@37 { + reg = <37>; + phy-handle = <&phy37>; + phys = <&serdes_hsio 37 0xff PHY_MODE_QSGMII>; + }; + port38: port@38 { + reg = <38>; + phy-handle = <&phy38>; + phys = <&serdes_hsio 38 0xff PHY_MODE_QSGMII>; + }; + port39: port@39 { + reg = <39>; + phy-handle = <&phy39>; + phys = <&serdes_hsio 39 0xff PHY_MODE_QSGMII>; + }; + port40: port@40 { + reg = <40>; + phy-handle = <&phy40>; + phys = <&serdes_hsio 40 SERDES6G(14) PHY_MODE_QSGMII>; + }; + port41: port@41 { + reg = <41>; + phy-handle = <&phy41>; + phys = <&serdes_hsio 41 0xff PHY_MODE_QSGMII>; + }; + port42: port@42 { + reg = <42>; + phy-handle = <&phy42>; + phys = <&serdes_hsio 42 0xff PHY_MODE_QSGMII>; + }; + port43: port@43 { + reg = <43>; + phy-handle = <&phy43>; + phys = <&serdes_hsio 43 0xff PHY_MODE_QSGMII>; + }; + port44: port@44 { + reg = <44>; + phy-handle = <&phy44>; + phys = <&serdes_hsio 44 SERDES6G(15) PHY_MODE_QSGMII>; + }; + port45: port@45 { + reg = <45>; + phy-handle = <&phy45>; + phys = <&serdes_hsio 45 0xff PHY_MODE_QSGMII>; + }; + port46: port@46 { + reg = <46>; + phy-handle = <&phy46>; + phys = <&serdes_hsio 46 0xff PHY_MODE_QSGMII>; + }; + port47: port@47 { + reg = <47>; + phy-handle = <&phy47>; + phys = <&serdes_hsio 47 0xff PHY_MODE_QSGMII>; + }; + }; +}; diff --git a/arch/mips/dts/mscc,jr2.dtsi b/arch/mips/dts/mscc,jr2.dtsi index 090092607b..7f5a96fecd 100644 --- a/arch/mips/dts/mscc,jr2.dtsi +++ b/arch/mips/dts/mscc,jr2.dtsi @@ -183,5 +183,121 @@ gpio-bank-name = "sgpio2_"; sgpio-clock = <0x14>; }; + + switch: switch@1010000 { + compatible = "mscc,vsc7454-switch"; + reg = <0x01040000 0x0100>, // VTSS_TO_DEV_0 + <0x01050000 0x0100>, // VTSS_TO_DEV_1 + <0x01060000 0x0100>, // VTSS_TO_DEV_2 + <0x01070000 0x0100>, // VTSS_TO_DEV_3 + <0x01080000 0x0100>, // VTSS_TO_DEV_4 + <0x01090000 0x0100>, // VTSS_TO_DEV_5 + <0x010a0000 0x0100>, // VTSS_TO_DEV_6 + <0x010b0000 0x0100>, // VTSS_TO_DEV_7 + <0x010c0000 0x0100>, // VTSS_TO_DEV_8 + <0x010d0000 0x0100>, // VTSS_TO_DEV_9 + <0x010e0000 0x0100>, // VTSS_TO_DEV_10 + <0x010f0000 0x0100>, // VTSS_TO_DEV_11 + <0x01100000 0x0100>, // VTSS_TO_DEV_12 + <0x01110000 0x0100>, // VTSS_TO_DEV_13 + <0x01120000 0x0100>, // VTSS_TO_DEV_14 + <0x01130000 0x0100>, // VTSS_TO_DEV_15 + <0x01140000 0x0100>, // VTSS_TO_DEV_16 + <0x01150000 0x0100>, // VTSS_TO_DEV_17 + <0x01160000 0x0100>, // VTSS_TO_DEV_18 + <0x01170000 0x0100>, // VTSS_TO_DEV_19 + <0x01180000 0x0100>, // VTSS_TO_DEV_20 + <0x01190000 0x0100>, // VTSS_TO_DEV_21 + <0x011a0000 0x0100>, // VTSS_TO_DEV_22 + <0x011b0000 0x0100>, // VTSS_TO_DEV_23 + <0x011c0000 0x0100>, // VTSS_TO_DEV_24 + <0x011d0000 0x0100>, // VTSS_TO_DEV_25 + <0x011e0000 0x0100>, // VTSS_TO_DEV_26 + <0x011f0000 0x0100>, // VTSS_TO_DEV_27 + <0x01200000 0x0100>, // VTSS_TO_DEV_28 + <0x01210000 0x0100>, // VTSS_TO_DEV_29 + <0x01220000 0x0100>, // VTSS_TO_DEV_30 + <0x01230000 0x0100>, // VTSS_TO_DEV_31 + <0x01240000 0x0100>, // VTSS_TO_DEV_32 + <0x01250000 0x0100>, // VTSS_TO_DEV_33 + <0x01260000 0x0100>, // VTSS_TO_DEV_34 + <0x01270000 0x0100>, // VTSS_TO_DEV_35 + <0x01280000 0x0100>, // VTSS_TO_DEV_36 + <0x01290000 0x0100>, // VTSS_TO_DEV_37 + <0x012a0000 0x0100>, // VTSS_TO_DEV_38 + <0x012b0000 0x0100>, // VTSS_TO_DEV_39 + <0x012c0000 0x0100>, // VTSS_TO_DEV_40 + <0x012d0000 0x0100>, // VTSS_TO_DEV_41 + <0x012e0000 0x0100>, // VTSS_TO_DEV_42 + <0x012f0000 0x0100>, // VTSS_TO_DEV_43 + <0x01300000 0x0100>, // VTSS_TO_DEV_44 + <0x01310000 0x0100>, // VTSS_TO_DEV_45 + <0x01320000 0x0100>, // VTSS_TO_DEV_46 + <0x01330000 0x0100>, // VTSS_TO_DEV_47 + <0x01f00000 0x100000>, // ANA_AC + <0x01d00000 0x100000>, // ANA_CL + <0x01e00000 0x100000>, // ANA_L2 + <0x01410000 0x10000>, // ASM + <0x01460000 0x10000>, // HSIO + <0x01420000 0x00000>, // LRN + <0x017d0000 0x10000>, // QFWD + <0x01020000 0x20000>, // QS + <0x017e0000 0x10000>, // QSYS + <0x01b00000 0x80000>; // REW + reg-names = "port0", "port1", "port2", "port3", "port4", + "port5", "port6", "port7", "port8", "port9", + "port10", "port11", "port12", "port13", + "port14", "port15", "port16", "port17", + "port18", "port19", "port20", "port21", + "port22", "port23", "port24", "port25", + "port26", "port27", "port28", "port29", + "port30", "port31", "port32", "port33", + "port34", "port35", "port36", "port37", + "port38", "port39", "port40", "port41", + "port42", "port43", "port44", "port45", + "port46", "port47", "ana_ac", "ana_cl", + "ana_l2", "asm", "hsio", "lrn", "qfwd", + "qs", "qsys", "rew"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio0: mdio@010100c8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100c8 0x24>; + status = "disabled"; + }; + + mdio1: mdio@010100ec { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100ec 0x24>; + status = "disabled"; + }; + + mdio2: mdio@01010110 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x01010110 0x24>; + status = "disabled"; + }; + + hsio: syscon@10d0000 { + compatible = "mscc,jr2-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + + serdes_hsio: serdes_hsio { + compatible = "mscc,vsc7454-serdes"; + #phy-cells = <3>; + }; + }; }; }; diff --git a/arch/mips/dts/mscc,servalt.dtsi b/arch/mips/dts/mscc,servalt.dtsi index 4beb7a38d0..45ae2de5e8 100644 --- a/arch/mips/dts/mscc,servalt.dtsi +++ b/arch/mips/dts/mscc,servalt.dtsi @@ -145,5 +145,45 @@ #gpio-cells = <2>; gpio-ranges = <&sgpio 0 0 128>; }; + + switch: switch@1010000 { + compatible = "mscc,vsc7437-switch"; + reg = <0x01030000 0x0100>, // VTSS_TO_DEV_0 + <0x01040000 0x0100>, // VTSS_TO_DEV_1 + <0x01f00000 0x100000>, // ANA_AC + <0x01d00000 0x100000>, // ANA_CL + <0x01e00000 0x100000>, // ANA_L2 + <0x01120000 0x10000>, // ASM + <0x01130000 0x00000>, // LRN + <0x017d0000 0x10000>, // QFWD + <0x01020000 0x20000>, // QS + <0x017e0000 0x10000>, // QSYS + <0x01b00000 0x80000>; // REW + reg-names = "port0", "port1", + "ana_ac", "ana_cl", "ana_l2", "asm", "lrn", + "qfwd", "qs", "qsys", "rew"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio0: mdio@010100c4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100c4 0x24>; + status = "disabled"; + }; + + mdio1: mdio@010100e8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100e8 0x24>; + status = "disabled"; + }; }; }; diff --git a/arch/mips/dts/qca953x.dtsi b/arch/mips/dts/qca953x.dtsi index ba29ea287e..90d34ddbbf 100644 --- a/arch/mips/dts/qca953x.dtsi +++ b/arch/mips/dts/qca953x.dtsi @@ -65,6 +65,37 @@ status = "disabled"; }; + + gmac0: eth0@0x19000000 { + compatible = "qca,ag953x-mac"; + reg = <0x19000000 0x200>; + phy = <&phy4>; + phy-mode = "rmii"; + + status = "disabled"; + }; + + gmac1: eth1@0x1a000000 { + compatible = "qca,ag953x-mac"; + reg = <0x1a000000 0x200>; + phy = <&phy0>; + phy-mode = "rgmii"; + + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "rmii"; + }; + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rmii"; + }; + }; + }; }; spi0: spi@1f000000 { diff --git a/arch/mips/dts/qca956x.dtsi b/arch/mips/dts/qca956x.dtsi new file mode 100644 index 0000000000..6cb360b3f8 --- /dev/null +++ b/arch/mips/dts/qca956x.dtsi @@ -0,0 +1,87 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Rosy Song + */ + +#include "skeleton.dtsi" + +/ { + compatible = "qca,qca956x"; + + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "mips,mips74Kc"; + reg = <0>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + xtal: xtal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-output-names = "xtal"; + }; + }; + + ahb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + apb { + compatible = "simple-bus"; + ranges; + + #address-cells = <1>; + #size-cells = <1>; + + uart0: uart@18020000 { + compatible = "ns16550"; + reg = <0x18020000 0x20>; + reg-shift = <2>; + + status = "disabled"; + }; + + gmac0: eth@0x19000000 { + compatible = "qca,ag956x-mac"; + reg = <0x19000000 0x200>; + phy = <&phy0>; + phy-mode = "sgmii"; + + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + }; + + spi0: spi@1f000000 { + compatible = "qca,ar7100-spi"; + reg = <0x1f000000 0x10>; + + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; diff --git a/arch/mips/dts/serval2_pcb112.dts b/arch/mips/dts/serval2_pcb112.dts index fe025f4c42..7a9d595433 100644 --- a/arch/mips/dts/serval2_pcb112.dts +++ b/arch/mips/dts/serval2_pcb112.dts @@ -5,6 +5,7 @@ /dts-v1/; #include "mscc,jr2.dtsi" +#include / { model = "Serval2 NID PCB112 Reference Board"; @@ -58,3 +59,46 @@ status = "okay"; sgpio-ports = <0x3fe0ffff>; }; + +&mdio0 { + status = "okay"; + + phy16: ethernet-phy@16 { + reg = <16>; + }; + phy17: ethernet-phy@17 { + reg = <17>; + }; + phy18: ethernet-phy@18 { + reg = <18>; + }; + phy19: ethernet-phy@19 { + reg = <19>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <24>; + phy-handle = <&phy16>; + phys = <&serdes_hsio 24 SERDES6G(0) PHY_MODE_SGMII>; + }; + port1: port@1 { + reg = <25>; + phy-handle = <&phy17>; + phys = <&serdes_hsio 25 SERDES6G(1) PHY_MODE_SGMII>; + }; + port2: port@2 { + reg = <26>; + phy-handle = <&phy18>; + phys = <&serdes_hsio 26 SERDES6G(2) PHY_MODE_SGMII>; + }; + port3: port@3 { + reg = <27>; + phy-handle = <&phy19>; + phys = <&serdes_hsio 27 SERDES6G(3) PHY_MODE_SGMII>; + }; + }; +}; diff --git a/arch/mips/dts/servalt_pcb116.dts b/arch/mips/dts/servalt_pcb116.dts index fb3331204b..9d4921504d 100644 --- a/arch/mips/dts/servalt_pcb116.dts +++ b/arch/mips/dts/servalt_pcb116.dts @@ -54,3 +54,28 @@ status = "okay"; sgpio-ports = <0x0000fe7f>; }; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + }; + }; +}; diff --git a/arch/mips/lib/bootm.c b/arch/mips/lib/bootm.c index deca5189e3..35152cb3f6 100644 --- a/arch/mips/lib/bootm.c +++ b/arch/mips/lib/bootm.c @@ -215,23 +215,6 @@ static void linux_env_legacy(bootm_headers_t *images) } } -static int boot_reloc_ramdisk(bootm_headers_t *images) -{ - ulong rd_len = images->rd_end - images->rd_start; - - /* - * In case of legacy uImage's, relocation of ramdisk is already done - * by do_bootm_states() and should not repeated in 'bootm prep'. - */ - if (images->state & BOOTM_STATE_RAMDISK) { - debug("## Ramdisk already relocated\n"); - return 0; - } - - return boot_ramdisk_high(&images->lmb, images->rd_start, - rd_len, &images->initrd_start, &images->initrd_end); -} - static int boot_reloc_fdt(bootm_headers_t *images) { /* @@ -270,8 +253,6 @@ static int boot_setup_fdt(bootm_headers_t *images) static void boot_prep_linux(bootm_headers_t *images) { - boot_reloc_ramdisk(images); - if (CONFIG_IS_ENABLED(MIPS_BOOT_FDT) && images->ft_len) { boot_reloc_fdt(images); boot_setup_fdt(images); diff --git a/arch/mips/mach-ath79/Kconfig b/arch/mips/mach-ath79/Kconfig index bc86f591df..bdb23b5765 100644 --- a/arch/mips/mach-ath79/Kconfig +++ b/arch/mips/mach-ath79/Kconfig @@ -33,6 +33,15 @@ config SOC_QCA953X help This supports QCA/Atheros qca953x family SOCs. +config SOC_QCA956X + bool + select MIPS_TUNE_74KC + select SUPPORTS_BIG_ENDIAN + select SUPPORTS_CPU_MIPS32_R1 + select SUPPORTS_CPU_MIPS32_R2 + help + This supports QCA/Atheros qca956x family SOCs. + choice prompt "Board select" @@ -44,6 +53,10 @@ config TARGET_AP143 bool "AP143 Reference Board" select SOC_QCA953X +config TARGET_AP152 + bool "AP152 Reference Board" + select SOC_QCA956X + config BOARD_TPLINK_WDR4300 bool "TP-Link WDR4300 Board" select SOC_AR934X @@ -52,6 +65,7 @@ endchoice source "board/qca/ap121/Kconfig" source "board/qca/ap143/Kconfig" +source "board/qca/ap152/Kconfig" source "board/tplink/wdr4300/Kconfig" endmenu diff --git a/arch/mips/mach-ath79/Makefile b/arch/mips/mach-ath79/Makefile index 7aa40c65d3..fbd40c02be 100644 --- a/arch/mips/mach-ath79/Makefile +++ b/arch/mips/mach-ath79/Makefile @@ -7,3 +7,4 @@ obj-y += dram.o obj-$(CONFIG_SOC_AR933X) += ar933x/ obj-$(CONFIG_SOC_AR934X) += ar934x/ obj-$(CONFIG_SOC_QCA953X) += qca953x/ +obj-$(CONFIG_SOC_QCA956X) += qca956x/ diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h index 5d371bb582..5888f6eb28 100644 --- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h +++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h @@ -194,6 +194,9 @@ #define QCA956X_WMAC_BASE \ (AR71XX_APB_BASE + 0x00100000) #define QCA956X_WMAC_SIZE 0x20000 +#define QCA956X_RTC_BASE \ + (AR71XX_APB_BASE + 0x00107000) +#define QCA956X_RTC_SIZE 0x1000 #define QCA956X_EHCI0_BASE 0x1b000000 #define QCA956X_EHCI1_BASE 0x1b400000 #define QCA956X_EHCI_SIZE 0x200 @@ -201,6 +204,10 @@ (AR71XX_APB_BASE + 0x00070000) #define QCA956X_GMAC_SIZE 0x64 +#define QCA956X_SRIF_BASE \ + (AR71XX_APB_BASE + 0x00116000) +#define QCA956X_SRIF_SIZE 0x1000 + /* * DDR_CTRL block */ @@ -278,6 +285,18 @@ #define QCA953X_DDR_REG_CTL_CONF 0x108 #define QCA953X_DDR_REG_CONFIG3 0x15c +#define QCA956X_DDR_REG_TAP_CTRL2 0x24 +#define QCA956X_DDR_REG_TAP_CTRL3 0x28 +#define QCA956X_DDR_REG_DDR2_CONFIG 0xb8 +#define QCA956X_DDR_REG_DDR2_EMR2 0xbc +#define QCA956X_DDR_REG_DDR2_EMR3 0xc0 +#define QCA956X_DDR_REG_BURST 0xc4 +#define QCA956X_DDR_REG_BURST2 0xc8 +#define QCA956X_DDR_REG_TIMEOUT_MAX 0xcc +#define QCA956X_DDR_REG_FSM_WAIT_CTRL 0xe4 +#define QCA956X_DDR_REG_CTL_CONF 0x108 +#define QCA956X_DDR_REG_DDR3_CONFIG 0x15c + /* * PLL block */ @@ -519,6 +538,13 @@ #define QCA956X_PLL_DDR_CONFIG_REG 0x08 #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c #define QCA956X_PLL_CLK_CTRL_REG 0x10 +#define QCA956X_PLL_SWITCH_CLK_CTRL_REG 0x28 +#define QCA956X_PLL_ETH_XMII_CTRL_REG 0x30 +#define QCA956X_PLL_DDR_DIT_FRAC_REG 0x38 +#define QCA956X_PLL_DDR_DIT2_FRAC_REG 0x3c +#define QCA956X_PLL_CPU_DIT_FRAC_REG 0x40 +#define QCA956X_PLL_CPU_DIT2_FRAC_REG 0x44 +#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12 #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f @@ -528,7 +554,7 @@ #define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0 #define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f #define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5 -#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x3fff +#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff #define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18 #define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff @@ -540,7 +566,7 @@ #define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0 #define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f #define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5 -#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x3fff +#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff #define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18 #define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff @@ -756,6 +782,17 @@ #define QCA955X_RESET_MBOX BIT(1) #define QCA955X_RESET_I2S BIT(0) +#define QCA956X_RESET_EXTERNAL BIT(28) +#define QCA956X_RESET_FULL_CHIP BIT(24) +#define QCA956X_RESET_GE1_MDIO BIT(23) /* Reserved in datasheet */ +#define QCA956X_RESET_GE0_MDIO BIT(22) +#define QCA956X_RESET_GE1_MAC BIT(13) /* Reserved in datasheet */ +#define QCA956X_RESET_SGMII_ASSERT BIT(12) +#define QCA956X_RESET_GE0_MAC BIT(9) +#define QCA956X_RESET_SGMII BIT(8) +#define QCA956X_RESET_SGMII_ANALOG BIT(2) +#define QCA956X_RESET_SWITCH BIT(0) + #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18) #define AR933X_BOOTSTRAP_DDR2 BIT(13) #define AR933X_BOOTSTRAP_EEPBUSY BIT(4) @@ -1099,8 +1136,12 @@ #define QCA953X_GPIO_IN_MUX_UART0_SIN 9 #define QCA953X_GPIO_IN_MUX_SPI_DATA_IN 8 +#define QCA956X_GPIO(x) BIT(x) +#define QCA956X_GPIO_MUX_MASK(x) (0xff << (x)) #define QCA956X_GPIO_OUT_MUX_GE0_MDO 32 #define QCA956X_GPIO_OUT_MUX_GE0_MDC 33 +#define QCA956X_GPIO_IN_MUX_UART0_SIN 0x12 +#define QCA956X_GPIO_OUT_MUX_UART0_SOUT 0x16 #define AR71XX_GPIO_COUNT 16 #define AR7240_GPIO_COUNT 18 @@ -1179,6 +1220,25 @@ #define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13 #define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7 +#define QCA956X_SRIF_BB_DPLL1_REG 0x180 +#define QCA956X_SRIF_BB_DPLL2_REG 0x184 +#define QCA956X_SRIF_BB_DPLL3_REG 0x188 + +#define QCA956X_SRIF_CPU_DPLL1_REG 0xf00 +#define QCA956X_SRIF_CPU_DPLL2_REG 0xf04 +#define QCA956X_SRIF_CPU_DPLL3_REG 0xf08 + +#define QCA956X_SRIF_DDR_DPLL1_REG 0xec0 +#define QCA956X_SRIF_DDR_DPLL2_REG 0xec4 +#define QCA956X_SRIF_DDR_DPLL3_REG 0xec8 + +#define QCA956X_SRIF_PCIE_DPLL1_REG 0xc80 +#define QCA956X_SRIF_PCIE_DPLL2_REG 0xc84 +#define QCA956X_SRIF_PCIE_DPLL3_REG 0xc88 + +#define QCA956X_SRIF_PMU1_REG 0xcc0 +#define QCA956X_SRIF_PMU2_REG 0xcc4 + /* * MII_CTRL block */ @@ -1261,4 +1321,17 @@ #define QCA955X_ETH_CFG_RGMII_EN BIT(0) #define QCA955X_ETH_CFG_GE0_SGMII BIT(6) +/* + * QCA956X GMAC Interface + */ + +#define QCA956X_GMAC_REG_ETH_CFG 0x00 +#define QCA956X_GMAC_REG_SGMII_RESET 0x14 +#define QCA956X_GMAC_REG_SGMII_SERDES 0x18 +#define QCA956X_GMAC_REG_MR_AN_CTRL 0x1c +#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34 +#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58 + +#define QCA956X_ETH_CFG_GE0_SGMII BIT(6) + #endif /* __ASM_AR71XX_H */ diff --git a/arch/mips/mach-ath79/include/mach/ath79.h b/arch/mips/mach-ath79/include/mach/ath79.h index 5de7a43f79..0fde5079b1 100644 --- a/arch/mips/mach-ath79/include/mach/ath79.h +++ b/arch/mips/mach-ath79/include/mach/ath79.h @@ -2,6 +2,7 @@ /* * Atheros AR71XX/AR724X/AR913X common definitions * + * Copyright (C) 2018-2019 Rosy Song * Copyright (C) 2015-2016 Wills Wang * Copyright (C) 2008-2011 Gabor Juhos * Copyright (C) 2008 Imre Kaloz @@ -146,4 +147,6 @@ int ath79_usb_reset(void); void ar934x_pll_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz); void ar934x_ddr_init(const u16 cpu_mhz, const u16 ddr_mhz, const u16 ahb_mhz); +void qca956x_pll_init(void); +void qca956x_ddr_init(void); #endif /* __ASM_MACH_ATH79_H */ diff --git a/arch/mips/mach-ath79/qca956x/Makefile b/arch/mips/mach-ath79/qca956x/Makefile new file mode 100644 index 0000000000..3f5fc0363f --- /dev/null +++ b/arch/mips/mach-ath79/qca956x/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y += cpu.o +obj-y += clk.o +obj-y += ddr.o qca956x-ddr-tap.o diff --git a/arch/mips/mach-ath79/qca956x/clk.c b/arch/mips/mach-ath79/qca956x/clk.c new file mode 100644 index 0000000000..33a44cfff4 --- /dev/null +++ b/arch/mips/mach-ath79/qca956x/clk.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Rosy Song + */ + +#include +#include +#include +#include +#include +#include +#include + +#define PLL_SRIF_DPLL2_KI_LSB 29 +#define PLL_SRIF_DPLL2_KI_MASK 0x60000000 +#define PLL_SRIF_DPLL2_KI_SET(x) \ + (((x) << PLL_SRIF_DPLL2_KI_LSB) & PLL_SRIF_DPLL2_KI_MASK) +#define PLL_SRIF_DPLL2_KD_LSB 25 +#define PLL_SRIF_DPLL2_KD_MASK 0x1e000000 +#define PLL_SRIF_DPLL2_KD_SET(x) \ + (((x) << PLL_SRIF_DPLL2_KD_LSB) & PLL_SRIF_DPLL2_KD_MASK) +#define PLL_SRIF_DPLL2_PLL_PWD_LSB 22 +#define PLL_SRIF_DPLL2_PLL_PWD_MASK 0x00400000 +#define PLL_SRIF_DPLL2_PLL_PWD_SET(x) \ + (((x) << PLL_SRIF_DPLL2_PLL_PWD_LSB) & PLL_SRIF_DPLL2_PLL_PWD_MASK) +#define PLL_SRIF_DPLL2_OUTDIV_LSB 19 +#define PLL_SRIF_DPLL2_OUTDIV_MASK 0x00380000 +#define PLL_SRIF_DPLL2_OUTDIV_SET(x) \ + (((x) << PLL_SRIF_DPLL2_OUTDIV_LSB) & PLL_SRIF_DPLL2_OUTDIV_MASK) +#define PLL_SRIF_DPLL2_PHASE_SHIFT_LSB 12 +#define PLL_SRIF_DPLL2_PHASE_SHIFT_MASK 0x0007f000 +#define PLL_SRIF_DPLL2_PHASE_SHIFT_SET(x) \ + (((x) << PLL_SRIF_DPLL2_PHASE_SHIFT_LSB) & PLL_SRIF_DPLL2_PHASE_SHIFT_MASK) +#define CPU_PLL_CONFIG_PLLPWD_LSB 30 +#define CPU_PLL_CONFIG_PLLPWD_MASK 0x40000000 +#define CPU_PLL_CONFIG_PLLPWD_SET(x) \ + (((x) << CPU_PLL_CONFIG_PLLPWD_LSB) & CPU_PLL_CONFIG_PLLPWD_MASK) +#define CPU_PLL_CONFIG_OUTDIV_LSB 19 +#define CPU_PLL_CONFIG_OUTDIV_MASK 0x00380000 +#define CPU_PLL_CONFIG_OUTDIV_SET(x) \ + (((x) << CPU_PLL_CONFIG_OUTDIV_LSB) & CPU_PLL_CONFIG_OUTDIV_MASK) +#define CPU_PLL_CONFIG_RANGE_LSB 17 +#define CPU_PLL_CONFIG_RANGE_MASK 0x00060000 +#define CPU_PLL_CONFIG_RANGE_SET(x) \ + (((x) << CPU_PLL_CONFIG_RANGE_LSB) & CPU_PLL_CONFIG_RANGE_MASK) +#define CPU_PLL_CONFIG_REFDIV_LSB 12 +#define CPU_PLL_CONFIG_REFDIV_MASK 0x0001f000 +#define CPU_PLL_CONFIG_REFDIV_SET(x) \ + (((x) << CPU_PLL_CONFIG_REFDIV_LSB) & CPU_PLL_CONFIG_REFDIV_MASK) +#define CPU_PLL_CONFIG1_NINT_LSB 18 +#define CPU_PLL_CONFIG1_NINT_MASK 0x07fc0000 +#define CPU_PLL_CONFIG1_NINT_SET(x) \ + (((x) << CPU_PLL_CONFIG1_NINT_LSB) & CPU_PLL_CONFIG1_NINT_MASK) +#define CPU_PLL_DITHER1_DITHER_EN_LSB 31 +#define CPU_PLL_DITHER1_DITHER_EN_MASK 0x80000000 +#define CPU_PLL_DITHER1_DITHER_EN_SET(x) \ + (((x) << CPU_PLL_DITHER1_DITHER_EN_LSB) & CPU_PLL_DITHER1_DITHER_EN_MASK) +#define CPU_PLL_DITHER1_UPDATE_COUNT_LSB 24 +#define CPU_PLL_DITHER1_UPDATE_COUNT_MASK 0x3f000000 +#define CPU_PLL_DITHER1_UPDATE_COUNT_SET(x) \ + (((x) << CPU_PLL_DITHER1_UPDATE_COUNT_LSB) & CPU_PLL_DITHER1_UPDATE_COUNT_MASK) +#define CPU_PLL_DITHER1_NFRAC_STEP_LSB 18 +#define CPU_PLL_DITHER1_NFRAC_STEP_MASK 0x00fc0000 +#define CPU_PLL_DITHER1_NFRAC_STEP_SET(x) \ + (((x) << CPU_PLL_DITHER1_NFRAC_STEP_LSB) & CPU_PLL_DITHER1_NFRAC_STEP_MASK) +#define CPU_PLL_DITHER1_NFRAC_MIN_LSB 0 +#define CPU_PLL_DITHER1_NFRAC_MIN_MASK 0x0003ffff +#define CPU_PLL_DITHER1_NFRAC_MIN_SET(x) \ + (((x) << CPU_PLL_DITHER1_NFRAC_MIN_LSB) & CPU_PLL_DITHER1_NFRAC_MIN_MASK) +#define CPU_PLL_DITHER2_NFRAC_MAX_LSB 0 +#define CPU_PLL_DITHER2_NFRAC_MAX_MASK 0x0003ffff +#define CPU_PLL_DITHER2_NFRAC_MAX_SET(x) \ + (((x) << CPU_PLL_DITHER2_NFRAC_MAX_LSB) & CPU_PLL_DITHER2_NFRAC_MAX_MASK) +#define DDR_PLL_CONFIG_PLLPWD_LSB 30 +#define DDR_PLL_CONFIG_PLLPWD_MASK 0x40000000 +#define DDR_PLL_CONFIG_PLLPWD_SET(x) \ + (((x) << DDR_PLL_CONFIG_PLLPWD_LSB) & DDR_PLL_CONFIG_PLLPWD_MASK) +#define DDR_PLL_CONFIG_OUTDIV_LSB 23 +#define DDR_PLL_CONFIG_OUTDIV_MASK 0x03800000 +#define DDR_PLL_CONFIG_OUTDIV_SET(x) \ + (((x) << DDR_PLL_CONFIG_OUTDIV_LSB) & DDR_PLL_CONFIG_OUTDIV_MASK) +#define DDR_PLL_CONFIG_RANGE_LSB 21 +#define DDR_PLL_CONFIG_RANGE_MASK 0x00600000 +#define DDR_PLL_CONFIG_RANGE_SET(x) \ + (((x) << DDR_PLL_CONFIG_RANGE_LSB) & DDR_PLL_CONFIG_RANGE_MASK) +#define DDR_PLL_CONFIG_REFDIV_LSB 16 +#define DDR_PLL_CONFIG_REFDIV_MASK 0x001f0000 +#define DDR_PLL_CONFIG_REFDIV_SET(x) \ + (((x) << DDR_PLL_CONFIG_REFDIV_LSB) & DDR_PLL_CONFIG_REFDIV_MASK) +#define DDR_PLL_CONFIG1_NINT_LSB 18 +#define DDR_PLL_CONFIG1_NINT_MASK 0x07fc0000 +#define DDR_PLL_CONFIG1_NINT_SET(x) \ + (((x) << DDR_PLL_CONFIG1_NINT_LSB) & DDR_PLL_CONFIG1_NINT_MASK) +#define DDR_PLL_DITHER1_DITHER_EN_LSB 31 +#define DDR_PLL_DITHER1_DITHER_EN_MASK 0x80000000 +#define DDR_PLL_DITHER1_DITHER_EN_SET(x) \ + (((x) << DDR_PLL_DITHER1_DITHER_EN_LSB) & DDR_PLL_DITHER1_DITHER_EN_MASK) +#define DDR_PLL_DITHER1_UPDATE_COUNT_LSB 27 +#define DDR_PLL_DITHER1_UPDATE_COUNT_MASK 0x78000000 +#define DDR_PLL_DITHER1_UPDATE_COUNT_SET(x) \ + (((x) << DDR_PLL_DITHER1_UPDATE_COUNT_LSB) & DDR_PLL_DITHER1_UPDATE_COUNT_MASK) +#define DDR_PLL_DITHER1_NFRAC_STEP_LSB 20 +#define DDR_PLL_DITHER1_NFRAC_STEP_MASK 0x07f00000 +#define DDR_PLL_DITHER1_NFRAC_STEP_SET(x) \ + (((x) << DDR_PLL_DITHER1_NFRAC_STEP_LSB) & DDR_PLL_DITHER1_NFRAC_STEP_MASK) +#define DDR_PLL_DITHER1_NFRAC_MIN_LSB 0 +#define DDR_PLL_DITHER1_NFRAC_MIN_MASK 0x0003ffff +#define DDR_PLL_DITHER1_NFRAC_MIN_SET(x) \ + (((x) << DDR_PLL_DITHER1_NFRAC_MIN_LSB) & DDR_PLL_DITHER1_NFRAC_MIN_MASK) +#define DDR_PLL_DITHER2_NFRAC_MAX_LSB 0 +#define DDR_PLL_DITHER2_NFRAC_MAX_MASK 0x0003ffff +#define DDR_PLL_DITHER2_NFRAC_MAX_SET(x) \ + (((x) << DDR_PLL_DITHER2_NFRAC_MAX_LSB) & DDR_PLL_DITHER2_NFRAC_MAX_MASK) +#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_LSB 24 +#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_MASK 0x01000000 +#define CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_LSB) & CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_MASK) +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_LSB 21 +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_MASK 0x00200000 +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_MASK) +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_LSB 20 +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_MASK 0x00100000 +#define CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_MASK) +#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_LSB 15 +#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_MASK 0x000f8000 +#define CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_MASK) +#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_LSB 10 +#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_MASK 0x00007c00 +#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_MASK) +#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_LSB 5 +#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_MASK 0x000003e0 +#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_MASK) +#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_LSB 4 +#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK 0x00000010 +#define CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK) +#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_LSB 3 +#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK 0x00000008 +#define CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK) +#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_LSB 2 +#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK 0x00000004 +#define CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(x) \ + (((x) << CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_LSB) & CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK) + +#define CPU_PLL_CONFIG1_NINT_VAL CPU_PLL_CONFIG1_NINT_SET(0x1f) +#define CPU_PLL_CONFIG_REF_DIV_VAL CPU_PLL_CONFIG_REFDIV_SET(0x1) +#define CPU_PLL_CONFIG_RANGE_VAL CPU_PLL_CONFIG_RANGE_SET(0) +#define CPU_PLL_CONFIG_OUT_DIV_VAL1 CPU_PLL_CONFIG_OUTDIV_SET(0) +#define CPU_PLL_CONFIG_OUT_DIV_VAL2 CPU_PLL_CONFIG_OUTDIV_SET(0) +#define CPU_PLL_DITHER1_VAL CPU_PLL_DITHER1_DITHER_EN_SET(0) | \ + CPU_PLL_DITHER1_NFRAC_MIN_SET(0) | \ + CPU_PLL_DITHER1_NFRAC_STEP_SET(0) | \ + CPU_PLL_DITHER1_UPDATE_COUNT_SET(0x0) +#define CPU_PLL_DITHER2_VAL CPU_PLL_DITHER2_NFRAC_MAX_SET(0x0) +#define DDR_PLL_CONFIG1_NINT_VAL DDR_PLL_CONFIG1_NINT_SET(0x1a) +#define DDR_PLL_CONFIG_REF_DIV_VAL DDR_PLL_CONFIG_REFDIV_SET(0x1) +#define DDR_PLL_CONFIG_RANGE_VAL DDR_PLL_CONFIG_RANGE_SET(0) +#define DDR_PLL_CONFIG_OUT_DIV_VAL1 DDR_PLL_CONFIG_OUTDIV_SET(0) +#define DDR_PLL_CONFIG_OUT_DIV_VAL2 DDR_PLL_CONFIG_OUTDIV_SET(0) +#define DDR_PLL_DITHER1_VAL DDR_PLL_DITHER1_DITHER_EN_SET(0) | \ + DDR_PLL_DITHER1_NFRAC_MIN_SET(0) | \ + DDR_PLL_DITHER1_NFRAC_STEP_SET(0) | \ + DDR_PLL_DITHER1_UPDATE_COUNT_SET(0x0) +#define DDR_PLL_DITHER2_VAL DDR_PLL_DITHER2_NFRAC_MAX_SET(0x0) +#define AHB_CLK_FROM_DDR CPU_DDR_CLOCK_CONTROL_AHBCLK_FROM_DDRPLL_SET(0) +#define CPU_AND_DDR_CLK_FROM_DDR \ + CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_DDRPLL_SET(0) +#define CPU_AND_DDR_CLK_FROM_CPU \ + CPU_DDR_CLOCK_CONTROL_CPU_DDR_CLK_FROM_CPUPLL_SET(0) +#define CPU_DDR_CLOCK_CONTROL_AHB_DIV_VAL \ + CPU_DDR_CLOCK_CONTROL_AHB_POST_DIV_SET(0x2) +#define CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV \ + CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV_SET(0) +#define CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV \ + CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV_SET(0) + +static inline void set_val(u32 _reg, u32 _mask, u32 _val) +{ + void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE, + AR71XX_PLL_SIZE, MAP_NOCACHE); + writel((readl(pll_regs + _reg) & (~(_mask))) | _val, pll_regs + _reg); +} + +#define cpu_pll_set(_mask, _val) \ + set_val(QCA956X_PLL_CPU_CONFIG_REG, _mask, _val) + +#define ddr_pll_set(_mask, _val) \ + set_val(QCA956X_PLL_DDR_CONFIG_REG, _mask, _val) + +#define cpu_ddr_control_set(_mask, _val) \ + set_val(QCA956X_PLL_CLK_CTRL_REG, _mask, _val) + +DECLARE_GLOBAL_DATA_PTR; + +static u32 qca956x_get_xtal(void) +{ + u32 val; + + val = ath79_get_bootstrap(); + if (val & QCA956X_BOOTSTRAP_REF_CLK_40) + return 40000000; + else + return 25000000; +} + +int get_serial_clock(void) +{ + return qca956x_get_xtal(); +} + +void qca956x_pll_init(void) +{ + void __iomem *srif_regs = map_physmem(QCA956X_SRIF_BASE, + QCA956X_SRIF_SIZE, MAP_NOCACHE); + void __iomem *pll_regs = map_physmem(AR71XX_PLL_BASE, + AR71XX_PLL_SIZE, MAP_NOCACHE); + + /* 8.16.2 Baseband DPLL2 */ + writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) | + PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_OUTDIV_SET(1) | + PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), srif_regs + QCA956X_SRIF_BB_DPLL2_REG); + + /* 8.16.2 PCIE DPLL2 */ + writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) | + PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_OUTDIV_SET(3) | + PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), srif_regs + QCA956X_SRIF_PCIE_DPLL2_REG); + + /* 8.16.2 DDR DPLL2 */ + writel(PLL_SRIF_DPLL2_KI_SET(2) | PLL_SRIF_DPLL2_KD_SET(0xa) | + PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), + srif_regs + QCA956X_SRIF_DDR_DPLL2_REG); + + /* 8.16.2 CPU DPLL2 */ + writel(PLL_SRIF_DPLL2_KI_SET(1) | PLL_SRIF_DPLL2_KD_SET(7) | + PLL_SRIF_DPLL2_PLL_PWD_SET(1) | PLL_SRIF_DPLL2_PHASE_SHIFT_SET(6), + srif_regs + QCA956X_SRIF_CPU_DPLL2_REG); + + /* pll_bypass_set */ + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(1)); + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(1)); + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(1)); + + /* init_cpu_pll */ + cpu_pll_set(CPU_PLL_CONFIG_PLLPWD_MASK, CPU_PLL_CONFIG_PLLPWD_SET(1)); + cpu_pll_set(CPU_PLL_CONFIG_REFDIV_MASK, CPU_PLL_CONFIG_REF_DIV_VAL); + cpu_pll_set(CPU_PLL_CONFIG_RANGE_MASK, CPU_PLL_CONFIG_RANGE_VAL); + cpu_pll_set(CPU_PLL_CONFIG_OUTDIV_MASK, CPU_PLL_CONFIG_OUT_DIV_VAL1); + set_val(QCA956X_PLL_CPU_CONFIG1_REG, CPU_PLL_CONFIG1_NINT_MASK, \ + CPU_PLL_CONFIG1_NINT_VAL); + + /* init_ddr_pll */ + ddr_pll_set(DDR_PLL_CONFIG_PLLPWD_MASK, DDR_PLL_CONFIG_PLLPWD_SET(1)); + ddr_pll_set(DDR_PLL_CONFIG_REFDIV_MASK, DDR_PLL_CONFIG_REF_DIV_VAL); + ddr_pll_set(DDR_PLL_CONFIG_RANGE_MASK, DDR_PLL_CONFIG_RANGE_VAL); + ddr_pll_set(DDR_PLL_CONFIG_OUTDIV_MASK, DDR_PLL_CONFIG_OUT_DIV_VAL1); + set_val(QCA956X_PLL_DDR_CONFIG1_REG, DDR_PLL_CONFIG1_NINT_MASK, + DDR_PLL_CONFIG1_NINT_VAL); + + /* init_ahb_pll */ + writel(CPU_DDR_CLOCK_CONTROL_AHB_DIV_VAL | AHB_CLK_FROM_DDR | + CPU_AND_DDR_CLK_FROM_DDR | CPU_AND_DDR_CLK_FROM_CPU | + CPU_DDR_CLOCK_CONTROL_DDR_POST_DIV | CPU_DDR_CLOCK_CONTROL_CPU_POST_DIV | + CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(1) | + CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(1) | + CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(1), pll_regs + QCA956X_PLL_CLK_CTRL_REG); + + /* ddr_pll_dither_unset */ + writel(DDR_PLL_DITHER1_VAL, pll_regs + QCA956X_PLL_DDR_DIT_FRAC_REG); + writel(DDR_PLL_DITHER2_VAL, pll_regs + QCA956X_PLL_DDR_DIT2_FRAC_REG); + + /* cpu_pll_dither_unset */ + writel(CPU_PLL_DITHER1_VAL, pll_regs + QCA956X_PLL_CPU_DIT_FRAC_REG); + writel(CPU_PLL_DITHER2_VAL, pll_regs + QCA956X_PLL_CPU_DIT2_FRAC_REG); + + /* pll_pwd_unset */ + cpu_pll_set(CPU_PLL_CONFIG_PLLPWD_MASK, CPU_PLL_CONFIG_PLLPWD_SET(0)); + ddr_pll_set(DDR_PLL_CONFIG_PLLPWD_MASK, DDR_PLL_CONFIG_PLLPWD_SET(0)); + + /* outdiv_unset */ + cpu_pll_set(CPU_PLL_CONFIG_OUTDIV_MASK, CPU_PLL_CONFIG_OUT_DIV_VAL2); + ddr_pll_set(DDR_PLL_CONFIG_OUTDIV_MASK, DDR_PLL_CONFIG_OUT_DIV_VAL2); + + /* pll_bypass_unset */ + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_CPU_PLL_BYPASS_SET(0)); + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_DDR_PLL_BYPASS_SET(0)); + cpu_ddr_control_set(CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_MASK, + CPU_DDR_CLOCK_CONTROL_AHB_PLL_BYPASS_SET(0)); + + while (readl(pll_regs + QCA956X_PLL_CPU_CONFIG_REG) & 0x8000000) + /* NOP */; + + while (readl(pll_regs + QCA956X_PLL_DDR_CONFIG_REG) & 0x8000000) + /* NOP */; +} + +int get_clocks(void) +{ + void __iomem *regs; + u32 ref_rate, cpu_rate, ddr_rate, ahb_rate; + u32 out_div, ref_div, postdiv, nint, hfrac, lfrac, clk_ctrl; + u32 pll, cpu_pll, ddr_pll, misc; + + /* + * QCA956x timer init workaround has to be applied right before setting + * up the clock. Else, there will be no jiffies + */ + regs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE, + MAP_NOCACHE); + misc = readl(regs + AR71XX_RESET_REG_MISC_INT_ENABLE); + misc |= MISC_INT_MIPS_SI_TIMERINT_MASK; + writel(misc, regs + AR71XX_RESET_REG_MISC_INT_ENABLE); + + regs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE, + MAP_NOCACHE); + pll = readl(regs + QCA956X_PLL_CPU_CONFIG_REG); + out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & + QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & + QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; + + pll = readl(regs + QCA956X_PLL_CPU_CONFIG1_REG); + nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & + QCA956X_PLL_CPU_CONFIG1_NINT_MASK; + hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & + QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK; + lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) & + QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK; + + ref_rate = qca956x_get_xtal(); + + cpu_pll = nint * ref_rate / ref_div; + cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); + cpu_pll += (hfrac >> 13) * ref_rate / ref_div; + cpu_pll /= (1 << out_div); + + pll = readl(regs + QCA956X_PLL_DDR_CONFIG_REG); + out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & + QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; + ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & + QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; + pll = readl(regs + QCA956X_PLL_DDR_CONFIG1_REG); + nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & + QCA956X_PLL_DDR_CONFIG1_NINT_MASK; + hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & + QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK; + lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) & + QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK; + + ddr_pll = nint * ref_rate / ref_div; + ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13); + ddr_pll += (hfrac >> 13) * ref_rate / ref_div; + ddr_pll /= (1 << out_div); + + clk_ctrl = readl(regs + QCA956X_PLL_CLK_CTRL_REG); + + postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & + QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; + + if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS) + cpu_rate = ref_rate; + else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL) + cpu_rate = ddr_pll / (postdiv + 1); + else + cpu_rate = cpu_pll / (postdiv + 1); + + postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) & + QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK; + + if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS) + ddr_rate = ref_rate; + else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL) + ddr_rate = cpu_pll / (postdiv + 1); + else + ddr_rate = ddr_pll / (postdiv + 1); + + postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) & + QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK; + + if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS) + ahb_rate = ref_rate; + else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL) + ahb_rate = ddr_pll / (postdiv + 1); + else + ahb_rate = cpu_pll / (postdiv + 1); + + gd->cpu_clk = cpu_rate; + gd->mem_clk = ddr_rate; + gd->bus_clk = ahb_rate; + + debug("cpu_clk=%u, ddr_clk=%u, bus_clk=%u\n", + cpu_rate, ddr_rate, ahb_rate); + + return 0; +} + +ulong get_bus_freq(ulong dummy) +{ + if (!gd->bus_clk) + get_clocks(); + return gd->bus_clk; +} + +ulong get_ddr_freq(ulong dummy) +{ + if (!gd->mem_clk) + get_clocks(); + return gd->mem_clk; +} diff --git a/arch/mips/mach-ath79/qca956x/cpu.c b/arch/mips/mach-ath79/qca956x/cpu.c new file mode 100644 index 0000000000..08a8c84e72 --- /dev/null +++ b/arch/mips/mach-ath79/qca956x/cpu.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Rosy Song + */ + +#include + +/* The lowlevel_init() is not needed on QCA956X */ +void lowlevel_init(void) {} diff --git a/arch/mips/mach-ath79/qca956x/ddr.c b/arch/mips/mach-ath79/qca956x/ddr.c new file mode 100644 index 0000000000..fb2230430c --- /dev/null +++ b/arch/mips/mach-ath79/qca956x/ddr.c @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Rosy Song + * + * Based on QSDK + */ + +#include +#include +#include +#include +#include +#include + +#define DDR_FSM_WAIT_CTRL_VAL 0xa12 +#define DDR_CTL_CONFIG_SRAM_TSEL_LSB 30 +#define DDR_CTL_CONFIG_SRAM_TSEL_MASK 0xc0000000 +#define DDR_CTL_CONFIG_SRAM_TSEL_SET(x) \ + (((x) << DDR_CTL_CONFIG_SRAM_TSEL_LSB) & DDR_CTL_CONFIG_SRAM_TSEL_MASK) +#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_LSB 20 +#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_MASK 0x00100000 +#define DDR_CTL_CONFIG_GE0_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_GE0_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_GE0_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_LSB 19 +#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_MASK 0x00080000 +#define DDR_CTL_CONFIG_GE1_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_GE1_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_GE1_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_USB_SRAM_SYNC_LSB 18 +#define DDR_CTL_CONFIG_USB_SRAM_SYNC_MASK 0x00040000 +#define DDR_CTL_CONFIG_USB_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_USB_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_USB_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_LSB 17 +#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_MASK 0x00020000 +#define DDR_CTL_CONFIG_PCIE_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_PCIE_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_PCIE_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_LSB 16 +#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_MASK 0x00010000 +#define DDR_CTL_CONFIG_WMAC_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_WMAC_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_WMAC_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_LSB 15 +#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_MASK 0x00008000 +#define DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_LSB 14 +#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_MASK 0x00004000 +#define DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_LSB) & DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_MASK) +#define DDR_CTL_CONFIG_PAD_DDR2_SEL_LSB 6 +#define DDR_CTL_CONFIG_PAD_DDR2_SEL_MASK 0x00000040 +#define DDR_CTL_CONFIG_PAD_DDR2_SEL_SET(x) \ + (((x) << DDR_CTL_CONFIG_PAD_DDR2_SEL_LSB) & DDR_CTL_CONFIG_PAD_DDR2_SEL_MASK) +#define DDR_CTL_CONFIG_CPU_DDR_SYNC_LSB 2 +#define DDR_CTL_CONFIG_CPU_DDR_SYNC_MASK 0x00000004 +#define DDR_CTL_CONFIG_CPU_DDR_SYNC_SET(x) \ + (((x) << DDR_CTL_CONFIG_CPU_DDR_SYNC_LSB) & DDR_CTL_CONFIG_CPU_DDR_SYNC_MASK) +#define DDR_CTL_CONFIG_HALF_WIDTH_LSB 1 +#define DDR_CTL_CONFIG_HALF_WIDTH_MASK 0x00000002 +#define DDR_CTL_CONFIG_HALF_WIDTH_SET(x) \ + (((x) << DDR_CTL_CONFIG_HALF_WIDTH_LSB) & DDR_CTL_CONFIG_HALF_WIDTH_MASK) +#define DDR_CONFIG_CAS_LATENCY_MSB_LSB 31 +#define DDR_CONFIG_CAS_LATENCY_MSB_MASK 0x80000000 +#define DDR_CONFIG_CAS_LATENCY_MSB_SET(x) \ + (((x) << DDR_CONFIG_CAS_LATENCY_MSB_LSB) & DDR_CONFIG_CAS_LATENCY_MSB_MASK) +#define DDR_CONFIG_OPEN_PAGE_LSB 30 +#define DDR_CONFIG_OPEN_PAGE_MASK 0x40000000 +#define DDR_CONFIG_OPEN_PAGE_SET(x) \ + (((x) << DDR_CONFIG_OPEN_PAGE_LSB) & DDR_CONFIG_OPEN_PAGE_MASK) +#define DDR_CONFIG_CAS_LATENCY_LSB 27 +#define DDR_CONFIG_CAS_LATENCY_MASK 0x38000000 +#define DDR_CONFIG_CAS_LATENCY_SET(x) \ + (((x) << DDR_CONFIG_CAS_LATENCY_LSB) & DDR_CONFIG_CAS_LATENCY_MASK) +#define DDR_CONFIG_TMRD_LSB 23 +#define DDR_CONFIG_TMRD_MASK 0x07800000 +#define DDR_CONFIG_TMRD_SET(x) \ + (((x) << DDR_CONFIG_TMRD_LSB) & DDR_CONFIG_TMRD_MASK) +#define DDR_CONFIG_TRFC_LSB 17 +#define DDR_CONFIG_TRFC_MASK 0x007e0000 +#define DDR_CONFIG_TRFC_SET(x) \ + (((x) << DDR_CONFIG_TRFC_LSB) & DDR_CONFIG_TRFC_MASK) +#define DDR_CONFIG_TRRD_LSB 13 +#define DDR_CONFIG_TRRD_MASK 0x0001e000 +#define DDR_CONFIG_TRRD_SET(x) \ + (((x) << DDR_CONFIG_TRRD_LSB) & DDR_CONFIG_TRRD_MASK) +#define DDR_CONFIG_TRP_LSB 9 +#define DDR_CONFIG_TRP_MASK 0x00001e00 +#define DDR_CONFIG_TRP_SET(x) \ + (((x) << DDR_CONFIG_TRP_LSB) & DDR_CONFIG_TRP_MASK) +#define DDR_CONFIG_TRCD_LSB 5 +#define DDR_CONFIG_TRCD_MASK 0x000001e0 +#define DDR_CONFIG_TRCD_SET(x) \ + (((x) << DDR_CONFIG_TRCD_LSB) & DDR_CONFIG_TRCD_MASK) +#define DDR_CONFIG_TRAS_LSB 0 +#define DDR_CONFIG_TRAS_MASK 0x0000001f +#define DDR_CONFIG_TRAS_SET(x) \ + (((x) << DDR_CONFIG_TRAS_LSB) & DDR_CONFIG_TRAS_MASK) +#define DDR_CONFIG2_HALF_WIDTH_LOW_LSB 31 +#define DDR_CONFIG2_HALF_WIDTH_LOW_MASK 0x80000000 +#define DDR_CONFIG2_HALF_WIDTH_LOW_SET(x) \ + (((x) << DDR_CONFIG2_HALF_WIDTH_LOW_LSB) & DDR_CONFIG2_HALF_WIDTH_LOW_MASK) +#define DDR_CONFIG2_SWAP_A26_A27_LSB 30 +#define DDR_CONFIG2_SWAP_A26_A27_MASK 0x40000000 +#define DDR_CONFIG2_SWAP_A26_A27_SET(x) \ + (((x) << DDR_CONFIG2_SWAP_A26_A27_LSB) & DDR_CONFIG2_SWAP_A26_A27_MASK) +#define DDR_CONFIG2_GATE_OPEN_LATENCY_LSB 26 +#define DDR_CONFIG2_GATE_OPEN_LATENCY_MASK 0x3c000000 +#define DDR_CONFIG2_GATE_OPEN_LATENCY_SET(x) \ + (((x) << DDR_CONFIG2_GATE_OPEN_LATENCY_LSB) & DDR_CONFIG2_GATE_OPEN_LATENCY_MASK) +#define DDR_CONFIG2_TWTR_LSB 21 +#define DDR_CONFIG2_TWTR_MASK 0x03e00000 +#define DDR_CONFIG2_TWTR_SET(x) \ + (((x) << DDR_CONFIG2_TWTR_LSB) & DDR_CONFIG2_TWTR_MASK) +#define DDR_CONFIG2_TRTP_LSB 17 +#define DDR_CONFIG2_TRTP_MASK 0x001e0000 +#define DDR_CONFIG2_TRTP_SET(x) \ + (((x) << DDR_CONFIG2_TRTP_LSB) & DDR_CONFIG2_TRTP_MASK) +#define DDR_CONFIG2_TRTW_LSB 12 +#define DDR_CONFIG2_TRTW_MASK 0x0001f000 +#define DDR_CONFIG2_TRTW_SET(x) \ + (((x) << DDR_CONFIG2_TRTW_LSB) & DDR_CONFIG2_TRTW_MASK) +#define DDR_CONFIG2_TWR_LSB 8 +#define DDR_CONFIG2_TWR_MASK 0x00000f00 +#define DDR_CONFIG2_TWR_SET(x) \ + (((x) << DDR_CONFIG2_TWR_LSB) & DDR_CONFIG2_TWR_MASK) +#define DDR_CONFIG2_CKE_LSB 7 +#define DDR_CONFIG2_CKE_MASK 0x00000080 +#define DDR_CONFIG2_CKE_SET(x) \ + (((x) << DDR_CONFIG2_CKE_LSB) & DDR_CONFIG2_CKE_MASK) +#define DDR_CONFIG2_CNTL_OE_EN_LSB 5 +#define DDR_CONFIG2_CNTL_OE_EN_MASK 0x00000020 +#define DDR_CONFIG2_CNTL_OE_EN_SET(x) \ + (((x) << DDR_CONFIG2_CNTL_OE_EN_LSB) & DDR_CONFIG2_CNTL_OE_EN_MASK) +#define DDR_CONFIG2_BURST_LENGTH_LSB 0 +#define DDR_CONFIG2_BURST_LENGTH_MASK 0x0000000f +#define DDR_CONFIG2_BURST_LENGTH_SET(x) \ + (((x) << DDR_CONFIG2_BURST_LENGTH_LSB) & DDR_CONFIG2_BURST_LENGTH_MASK) +#define RST_BOOTSTRAP_ADDRESS 0x180600b0 +#define PMU2_SWREGMSB_LSB 22 +#define PMU2_SWREGMSB_MASK 0xffc00000 +#define PMU2_SWREGMSB_SET(x) \ + (((x) << PMU2_SWREGMSB_LSB) & PMU2_SWREGMSB_MASK) +#define PMU2_PGM_LSB 21 +#define PMU2_PGM_MASK 0x00200000 +#define PMU2_PGM_SET(x) \ + (((x) << PMU2_PGM_LSB) & PMU2_PGM_MASK) + +#define CPU_DDR_SYNC_MODE DDR_CTL_CONFIG_CPU_DDR_SYNC_SET(0) + +/* +* DDR2 DDR1 +* 0x40c3 25MHz 0x4186 25Mhz +* 0x4138 40MHz 0x4270 40Mhz +*/ +#define CFG_DDR2_REFRESH_VAL 0x40c3 +#define CFG_DDR2_CONFIG_VAL DDR_CONFIG_CAS_LATENCY_MSB_SET(0x1) | \ + DDR_CONFIG_OPEN_PAGE_SET(0x1) | DDR_CONFIG_CAS_LATENCY_SET(0x4) | \ + DDR_CONFIG_TMRD_SET(0x6) | DDR_CONFIG_TRFC_SET(0x16) | \ + DDR_CONFIG_TRRD_SET(0x7) | DDR_CONFIG_TRP_SET(0xb) | \ + DDR_CONFIG_TRCD_SET(0xb) | DDR_CONFIG_TRAS_SET(0) +#define CFG_DDR2_CONFIG2_VAL DDR_CONFIG2_HALF_WIDTH_LOW_SET(0x1) | \ + DDR_CONFIG2_SWAP_A26_A27_SET(0x0) | DDR_CONFIG2_GATE_OPEN_LATENCY_SET(0xa) | \ + DDR_CONFIG2_TWTR_SET(0x16) | DDR_CONFIG2_TRTP_SET(0xa) | \ + DDR_CONFIG2_TRTW_SET(0xe) | DDR_CONFIG2_TWR_SET(0x2) | \ + DDR_CONFIG2_CKE_SET(0x1) | DDR_CONFIG2_CNTL_OE_EN_SET(0x1) | \ + DDR_CONFIG2_BURST_LENGTH_SET(0x8) + +#define CFG_DDR2_CONFIG3_VAL 0x0000000e +#define CFG_DDR2_EXT_MODE_VAL1 0x782 +#define CFG_DDR2_EXT_MODE_VAL2 0x402 +#define CFG_DDR2_MODE_VAL_INIT 0xb53 +#define CFG_DDR2_MODE_VAL 0xa53 +#define CFG_DDR2_TAP_VAL 0x10 +#define CFG_DDR2_EN_TWL_VAL 0x00001e91 +#define CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16 0xffff + +#define CFG_DDR_CTL_CONFIG DDR_CTL_CONFIG_SRAM_TSEL_SET(0x1) | \ + DDR_CTL_CONFIG_GE0_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_GE1_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_USB_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_PCIE_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_WMAC_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_MISC_SRC1_SRAM_SYNC_SET(0x1) | \ + DDR_CTL_CONFIG_MISC_SRC2_SRAM_SYNC_SET(0x1) + +DECLARE_GLOBAL_DATA_PTR; + +void qca956x_ddr_init(void) +{ + u32 ddr_config, ddr_config2, ddr_config3, mod_val, \ + mod_val_init, cycle_val, tap_val, ctl_config; + void __iomem *ddr_regs = map_physmem(AR71XX_DDR_CTRL_BASE, AR71XX_DDR_CTRL_SIZE, + MAP_NOCACHE); + void __iomem *srif_regs = map_physmem(QCA956X_SRIF_BASE, QCA956X_SRIF_SIZE, + MAP_NOCACHE); + + ddr_config = CFG_DDR2_CONFIG_VAL; + ddr_config2 = CFG_DDR2_CONFIG2_VAL; + ddr_config3 = CFG_DDR2_CONFIG3_VAL; + mod_val_init = CFG_DDR2_MODE_VAL_INIT; + mod_val = CFG_DDR2_MODE_VAL; + tap_val = CFG_DDR2_TAP_VAL; + cycle_val = CFG_DDR2_RD_DATA_THIS_CYCLE_VAL_16; + ctl_config = CFG_DDR_CTL_CONFIG | DDR_CTL_CONFIG_PAD_DDR2_SEL_SET(0x1) | + DDR_CTL_CONFIG_HALF_WIDTH_SET(0x1) | CPU_DDR_SYNC_MODE; + + writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL); + udelay(10); + + writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL); + udelay(10); + + writel(ctl_config, ddr_regs + QCA956X_DDR_REG_CTL_CONF); + udelay(10); + + writel(cycle_val, ddr_regs + AR71XX_DDR_REG_RD_CYCLE); + udelay(100); + + writel(0x74444444, ddr_regs + QCA956X_DDR_REG_BURST); + udelay(100); + + writel(0x44444444, ddr_regs + QCA956X_DDR_REG_BURST2); + udelay(100); + + writel(DDR_FSM_WAIT_CTRL_VAL, ddr_regs + QCA956X_DDR_REG_FSM_WAIT_CTRL); + udelay(100); + + writel(0xfffff, ddr_regs + QCA956X_DDR_REG_TIMEOUT_MAX); + udelay(100); + + writel(ddr_config, ddr_regs + AR71XX_DDR_REG_CONFIG); + udelay(100); + + writel(ddr_config2, ddr_regs + AR71XX_DDR_REG_CONFIG2); + udelay(100); + + writel(ddr_config3, ddr_regs + QCA956X_DDR_REG_DDR3_CONFIG); + udelay(100); + + writel(CFG_DDR2_EN_TWL_VAL, ddr_regs + QCA956X_DDR_REG_DDR2_CONFIG); + udelay(100); + + writel(ddr_config2 | 0x80, ddr_regs + AR71XX_DDR_REG_CONFIG2); /* CKE Enable */ + udelay(100); + + writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Precharge */ + udelay(10); + + writel(0, ddr_regs + QCA956X_DDR_REG_DDR2_EMR2); + writel(0x10, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR2 */ + udelay(10); + + writel(0, ddr_regs + QCA956X_DDR_REG_DDR2_EMR3); + writel(0x20, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR3 */ + udelay(10); + + /* EMR DLL enable, Reduced Driver Impedance control, Differential DQS disabled */ + writel(CFG_DDR2_EXT_MODE_VAL2, ddr_regs + AR71XX_DDR_REG_EMR); + udelay(100); + + writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */ + udelay(10); + + writel(mod_val_init, ddr_regs + AR71XX_DDR_REG_MODE); + udelay(1000); + + writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL); /* MR Write */ + udelay(10); + + writel(0x8, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Precharge */ + udelay(10); + + writel(0x4, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Auto Refresh */ + udelay(10); + + writel(0x4, ddr_regs + AR71XX_DDR_REG_CONTROL); /* Auto Refresh */ + udelay(10); + + /* Issue MRS to remove DLL out-of-reset */ + writel(mod_val, ddr_regs + AR71XX_DDR_REG_MODE); + udelay(100); + + writel(0x1, ddr_regs + AR71XX_DDR_REG_CONTROL); /* MR write */ + udelay(100); + + writel(CFG_DDR2_EXT_MODE_VAL1, ddr_regs + AR71XX_DDR_REG_EMR); + udelay(100); + + writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */ + udelay(100); + + writel(CFG_DDR2_EXT_MODE_VAL2, ddr_regs + AR71XX_DDR_REG_EMR); + udelay(100); + + writel(0x2, ddr_regs + AR71XX_DDR_REG_CONTROL); /* EMR write */ + udelay(100); + + writel(CFG_DDR2_REFRESH_VAL, ddr_regs + AR71XX_DDR_REG_REFRESH); + udelay(100); + + writel(tap_val, ddr_regs + AR71XX_DDR_REG_TAP_CTRL0); + writel(tap_val, ddr_regs + AR71XX_DDR_REG_TAP_CTRL1); + writel(tap_val, ddr_regs + QCA956X_DDR_REG_TAP_CTRL2); + writel(tap_val, ddr_regs + QCA956X_DDR_REG_TAP_CTRL3); + + writel(0x633c8176, srif_regs + QCA956X_SRIF_PMU1_REG); + /* Set DDR2 Voltage to 1.8 volts */ + writel(PMU2_SWREGMSB_SET(0x40) | PMU2_PGM_SET(0x1), + srif_regs + QCA956X_SRIF_PMU2_REG); +} diff --git a/arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S b/arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S new file mode 100644 index 0000000000..db54b575fb --- /dev/null +++ b/arch/mips/mach-ath79/qca956x/qca956x-ddr-tap.S @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Rosy Song + * + * Based on QSDK + */ + +#include +#include +#include +#include +#include +#include + + .set noreorder + +LEAF(ddr_tap_tuning) + li a0, 0xbd001f00 + sw zero, 0x0(a0) /* Place where the tap values are saved and used for SWEEP */ + sw zero, 0x4(a0) /* Place where the number of passing taps are saved. */ + sw zero, 0x14(a0) /* Place where the last pass tap value is stored */ + li a1, 0xaa55aa55 /* Indicates that the First pass tap value is not found */ + sw a1, 0x10(a0) /* Place where the First pass tap value is stored */ + nop + + li a0, CKSEG1ADDR(AR71XX_RESET_BASE) /* RESET_BASE_ADDRESS */ + lw a1, 0x1c(a0) /* Reading the RST_RESET_ADDRESS */ + li a2, 0x08000000 /* Setting the RST_RESET_RTC_RESET */ + or a1, a1, a2 + sw a1, 0x1c(a0) + + li a3, 0xffffffff + xor a2, a2, a3 + and a1, a1, a2 + sw a1, 0x1c(a0) /* Taking the RTC out of RESET */ + nop + + li a0, CKSEG1ADDR(QCA956X_RTC_BASE) /* RTC_BASE_ADDRESS */ + li a1, 0x1 + sw a1, 0x0040(a0) /* RTC_SYNC_RESET_ADDRESS */ + + li a2, 0x2 + +_poll_for_RTC_ON: + lw a1, 0x0044(a0) /* RTC_SYNC_STATUS_ADDRESS */ + and a1, a2, a1 + bne a1, a2, _poll_for_RTC_ON + nop + +_CHANGE_TAPS: + li t0, 0xbd001f00 /* Read the current value of the TAP for programming */ + lw t1, 0x0(t0) + li t2, 0x00000000 + or t3, t1, t2 + + li t0, 0xb8000000 /* DDR_BASE_ADDRESS */ + sw t3, 0x1c(t0) /* TAP_CONTROL_0_ADDRESS */ + sw t3, 0x20(t0) /* TAP_CONTROL_1_ADDRESS */ + sw t3, 0x24(t0) /* TAP_CONTROL_2_ADDRESS */ + sw t3, 0x28(t0) /* TAP_CONTROL_3_ADDRESS */ + + li t1, 0x00000010 /* Running the test 8 times */ + sw t1, 0x0068(t0) /* PERF_COMP_ADDR_1_ADDRESS */ + + li t1, 0xfa5de83f /* 4 Row Address Bits, 4 Column Address Bits, 2 BA bits */ + sw t1, 0x002c(t0) /* PERF_MASK_ADDR_0_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0070(t0) /* PERF_COMP_AHB_GE0_1_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0040(t0) /* PERF_COMP_AHB_GE1_0_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0078(t0) /* PERF_COMP_AHB_GE1_1_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0034(t0) /* PERF_MASK_AHB_GE0_0_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x006c(t0) /* PERF_MASK_AHB_GE0_1_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x003c(t0) /* PERF_MASK_AHB_GE1_0_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0074(t0) /* PERF_MASK_AHB_GE1_1_ADDRESS */ + + li t1, 0x0000ffff + sw t1, 0x0038(t0) /* PERF_COMP_AHB_GE0_0_ADDRESS */ + + li t1, 0x00000001 + sw t1, 0x011c(t0) /* DDR_BIST_ADDRESS */ + + li t2, 0x1 + +_bist_done_poll: + lw t1, 0x0120(t0) /* DDR_BIST_STATUS_ADDRESS */ + and t1, t1, t2 + bne t1, t2, _bist_done_poll + nop + + lw t1, 0x0120(t0) /* DDR_BIST_STATUS_ADDRESS */ + li t4, 0x000001fe + and t2, t1, t4 + srl t2, t2, 0x1 /* no. of Pass Runs */ + + li t5, 0x00000000 + sw t5, 0x011c(t0) /* DDR_BIST_ADDRESS - Stop the DDR BIST test */ + + li t5, 0x0001fe00 + and t5, t5, t1 + bnez t5, _iterate_tap /* This is a redundant compare but nevertheless - Comparing the FAILS */ + nop + + lw t1, 0x0068(t0) /* PERF_COMP_ADDR_1_ADDRESS */ + li t3, 0x000001fe + and t3, t3, t1 + srl t3, t3, 0x1 /* No. of runs in the config register. */ + bne t3, t2, _iterate_tap + nop + +pass_tap: + li t0, 0xbd001f00 + lw t1, 0x4(t0) + addiu t1, t1, 0x1 + sw t1, 0x4(t0) + + li t0, 0xbd001f10 + lw t1, 0x0(t0) + li t2, 0xaa55aa55 + beq t1, t2, _first_pass + nop + + li t0, 0xbd001f00 + lw t1, 0x0(t0) + li t0, 0xbd001f10 + sw t1, 0x4(t0) + nop + b _iterate_tap + nop + +_first_pass: + li t0, 0xbd001f00 + lw t1, 0x0(t0) + li t0, 0xbd001f10 + sw t1, 0x0(t0) + sw t1, 0x4(t0) + nop + +_iterate_tap: + li t0, 0xbd001f00 + lw t1, 0x0(t0) + li t2, 0x3f + beq t1, t2, _STOP_TEST + nop + + addiu t1, t1, 0x1 + sw t1, 0x0(t0) + nop + b _CHANGE_TAPS + nop + +_STOP_TEST: + li t0, 0xbd001f00 + lw t1, 0x4(t0) + bnez t1, _load_center_tap + nop + + li t3, 0x8 /* Default Tap to be used */ + b _load_tap_into_reg + nop + +_load_center_tap: + li t0, 0xbd001f10 + lw t1, 0x0(t0) + lw t2, 0x4(t0) + add t3, t1, t2 + srl t3, t3, 0x1 + li t4, 0x3f + and t3, t3, t4 + +_load_tap_into_reg: + li t0, 0xb8000000 + sw t3, 0x1c(t0) /* TAP_CONTROL_0_ADDRESS */ + sw t3, 0x20(t0) /* TAP_CONTROL_1_ADDRESS */ + sw t3, 0x24(t0) /* TAP_CONTROL_2_ADDRESS */ + sw t3, 0x28(t0) /* TAP_CONTROL_3_ADDRESS */ + + nop + jr ra + nop + END(ddr_tap_tuning) diff --git a/arch/mips/mach-ath79/reset.c b/arch/mips/mach-ath79/reset.c index 6a94d886f9..0ab3ab6383 100644 --- a/arch/mips/mach-ath79/reset.c +++ b/arch/mips/mach-ath79/reset.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ /* * Copyright (C) 2015-2016 Wills Wang + * Copyright (C) 2018-2019 Rosy Song */ #include @@ -11,6 +12,44 @@ #include #include +/* QCA956X ETH_SGMII_SERDES Registers */ +#define SGMII_SERDES_RES_CALIBRATION_LSB 23 +#define SGMII_SERDES_RES_CALIBRATION_MASK 0x07800000 +#define SGMII_SERDES_RES_CALIBRATION_SET(x) \ + (((x) << SGMII_SERDES_RES_CALIBRATION_LSB) & SGMII_SERDES_RES_CALIBRATION_MASK) +#define SGMII_SERDES_CDR_BW_LSB 1 +#define SGMII_SERDES_CDR_BW_MASK 0x00000006 +#define SGMII_SERDES_CDR_BW_SET(x) \ + (((x) << SGMII_SERDES_CDR_BW_LSB) & SGMII_SERDES_CDR_BW_MASK) +#define SGMII_SERDES_TX_DR_CTRL_LSB 4 +#define SGMII_SERDES_TX_DR_CTRL_MASK 0x00000070 +#define SGMII_SERDES_TX_DR_CTRL_SET(x) \ + (((x) << SGMII_SERDES_TX_DR_CTRL_LSB) & SGMII_SERDES_TX_DR_CTRL_MASK) +#define SGMII_SERDES_PLL_BW_LSB 8 +#define SGMII_SERDES_PLL_BW_MASK 0x00000100 +#define SGMII_SERDES_PLL_BW_SET(x) \ + (((x) << SGMII_SERDES_PLL_BW_LSB) & SGMII_SERDES_PLL_BW_MASK) +#define SGMII_SERDES_EN_SIGNAL_DETECT_LSB 16 +#define SGMII_SERDES_EN_SIGNAL_DETECT_MASK 0x00010000 +#define SGMII_SERDES_EN_SIGNAL_DETECT_SET(x) \ + (((x) << SGMII_SERDES_EN_SIGNAL_DETECT_LSB) & SGMII_SERDES_EN_SIGNAL_DETECT_MASK) +#define SGMII_SERDES_FIBER_SDO_LSB 17 +#define SGMII_SERDES_FIBER_SDO_MASK 0x00020000 +#define SGMII_SERDES_FIBER_SDO_SET(x) \ + (((x) << SGMII_SERDES_FIBER_SDO_LSB) & SGMII_SERDES_FIBER_SDO_MASK) +#define SGMII_SERDES_VCO_REG_LSB 27 +#define SGMII_SERDES_VCO_REG_MASK 0x78000000 +#define SGMII_SERDES_VCO_REG_SET(x) \ + (((x) << SGMII_SERDES_VCO_REG_LSB) & SGMII_SERDES_VCO_REG_MASK) +#define SGMII_SERDES_VCO_FAST_LSB 9 +#define SGMII_SERDES_VCO_FAST_MASK 0x00000200 +#define SGMII_SERDES_VCO_FAST_GET(x) \ + (((x) & SGMII_SERDES_VCO_FAST_MASK) >> SGMII_SERDES_VCO_FAST_LSB) +#define SGMII_SERDES_VCO_SLOW_LSB 10 +#define SGMII_SERDES_VCO_SLOW_MASK 0x00000400 +#define SGMII_SERDES_VCO_SLOW_GET(x) \ + (((x) & SGMII_SERDES_VCO_SLOW_MASK) >> SGMII_SERDES_VCO_SLOW_LSB) + void _machine_restart(void) { void __iomem *base; @@ -152,6 +191,236 @@ static int eth_init_qca953x(void) return 0; } +static int qca956x_sgmii_cal(void) +{ + int i; + u32 reg, rev_sgmii_val; + u32 vco_fast, vco_slow; + u32 start_val = 0, end_val = 0; + void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE, + MAP_NOCACHE); + void __iomem *pregs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE, + MAP_NOCACHE); + void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE, + MAP_NOCACHE); + const u32 mask = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII; + + writel(BIT(2) | BIT(0), pregs + QCA956X_PLL_ETH_SGMII_SERDES_REG); + + reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES); + vco_fast = SGMII_SERDES_VCO_FAST_GET(reg); + vco_slow = SGMII_SERDES_VCO_SLOW_GET(reg); + + /* Set resistor calibration from 0000 to 1111 */ + for (i = 0; i < 0x10; i++) { + reg = (readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) & + ~SGMII_SERDES_RES_CALIBRATION_MASK) | + SGMII_SERDES_RES_CALIBRATION_SET(i); + writel(reg, gregs + QCA956X_GMAC_REG_SGMII_SERDES); + + udelay(50); + + reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES); + if (vco_fast != SGMII_SERDES_VCO_FAST_GET(reg) || + vco_slow != SGMII_SERDES_VCO_SLOW_GET(reg)) { + if (start_val == 0) { + start_val = i; + end_val = i; + } else { + end_val = i; + } + } + vco_fast = SGMII_SERDES_VCO_FAST_GET(reg); + vco_slow = SGMII_SERDES_VCO_SLOW_GET(reg); + } + + if (start_val == 0) + rev_sgmii_val = 0x7; + else + rev_sgmii_val = (start_val + end_val) >> 1; + + writel((readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) & + ~SGMII_SERDES_RES_CALIBRATION_MASK) | + SGMII_SERDES_RES_CALIBRATION_SET(rev_sgmii_val), + gregs + QCA956X_GMAC_REG_SGMII_SERDES); + + writel(BIT(2) | BIT(0), pregs + QCA956X_PLL_ETH_SGMII_SERDES_REG); + + reg = readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES); + writel(SGMII_SERDES_CDR_BW_SET(3) | SGMII_SERDES_TX_DR_CTRL_SET(1) | + SGMII_SERDES_PLL_BW_SET(1) | SGMII_SERDES_EN_SIGNAL_DETECT_SET(1) | + SGMII_SERDES_FIBER_SDO_SET(1) | SGMII_SERDES_VCO_REG_SET(3) | reg, + gregs + QCA956X_GMAC_REG_SGMII_SERDES); + + setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask); + mdelay(1); + clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask); + mdelay(1); + + while (!(readl(gregs + QCA956X_GMAC_REG_SGMII_SERDES) & BIT(15))) + /* NOP */; + + return 0; +} + +static int qca956x_sgmii_setup(void) +{ + int i; + u32 s = 0, reg = 0; + u32 _regs[] = { + BIT(4), /* HW_RX_125M_N */ + BIT(2), /* RX_125M_N */ + BIT(3), /* TX_125M_N */ + BIT(0), /* RX_CLK_N */ + BIT(1), /* TX_CLK_N */ + }; + void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE, + MAP_NOCACHE); + + /* Force sgmii mode */ + writel(BIT(6) | BIT(15) | BIT(8), gregs + QCA956X_GMAC_REG_MR_AN_CTRL); + udelay(10); + writel(0x2 | BIT(5) | (0x2 << 6), gregs + QCA956X_GMAC_REG_SGMII_CONFIG); + + /* SGMII reset sequence sugguest by qca systems team. */ + writel(0, gregs + QCA956X_GMAC_REG_SGMII_RESET); + for (i = 0; i < ARRAY_SIZE(_regs); i++) { + reg |= _regs[i]; + writel(reg, gregs + QCA956X_GMAC_REG_SGMII_RESET); + } + + writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) & ~BIT(15), + gregs + QCA956X_GMAC_REG_MR_AN_CTRL); + + /* + * WARNING: Across resets SGMII link status goes to weird state. + * if 0xb8070058 (SGMII_DEBUG Register) reads other than 0xf or 0x10 + * for sure we are in bad state. + * Issue a PHY RESET in MR_AN_CONTROL_ADDRESS to keep going. + */ + i = 0; + s = (readl(gregs + QCA956X_GMAC_REG_SGMII_DEBUG) & 0xff); + while (!(s == 0xf || s == 0x10)) { + writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) | BIT(15), + gregs + QCA956X_GMAC_REG_MR_AN_CTRL); + udelay(100); + writel(readl(gregs + QCA956X_GMAC_REG_MR_AN_CTRL) & ~BIT(15), + gregs + QCA956X_GMAC_REG_MR_AN_CTRL); + if (i++ == 10) + break; + s = (readl(gregs + QCA956X_GMAC_REG_SGMII_DEBUG) & 0xff); + } + + return 0; +} + +static int qca956x_s17_reset(void) +{ + void __iomem *regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, + MAP_NOCACHE); + void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE, + MAP_NOCACHE); + const u32 mask = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII | + QCA956X_RESET_EXTERNAL | QCA956X_RESET_SGMII_ANALOG | + QCA956X_RESET_SWITCH; + /* Bits(Reserved in datasheet) should be set to 1 */ + const u32 mask_r = QCA956X_RESET_SGMII_ASSERT | QCA956X_RESET_SGMII | + QCA956X_RESET_EXTERNAL; + + setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask); + mdelay(1); + clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask_r); + mdelay(1); + + /* Reset s17 switch(GPIO11) SYS_RST_L */ + writel(readl(regs + AR71XX_GPIO_REG_OE) & ~BIT(11), + regs + AR71XX_GPIO_REG_OE); + udelay(100); + + writel(readl(regs + AR71XX_GPIO_REG_OUT) & ~BIT(11), + regs + AR71XX_GPIO_REG_OUT); + udelay(100); + writel(readl(regs + AR71XX_GPIO_REG_OUT) | BIT(11), + regs + AR71XX_GPIO_REG_OUT); + + return 0; +} + +static int qca956x_init_mdio(void) +{ + u32 reg; + void __iomem *regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, + MAP_NOCACHE); + void __iomem *rregs = map_physmem(AR71XX_RESET_BASE, AR71XX_RESET_SIZE, + MAP_NOCACHE); + const u32 mask = QCA956X_RESET_GE0_MDIO | QCA956X_RESET_GE0_MAC | + QCA956X_RESET_GE1_MDIO | QCA956X_RESET_GE1_MAC; + + setbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask); + mdelay(1); + clrbits_be32(rregs + QCA956X_RESET_REG_RESET_MODULE, mask); + mdelay(1); + + /* GPIO4 as MDI */ + reg = readl(regs + QCA956X_GPIO_REG_IN_ENABLE3); + reg &= ~(0xff << 16); + reg |= (0x4 << 16); + writel(reg, regs + QCA956X_GPIO_REG_IN_ENABLE3); + + /* GPIO4 as MDO */ + reg = readl(regs + QCA956X_GPIO_REG_OUT_FUNC1); + reg &= ~0xff; + reg |= 0x20; + writel(reg, regs + QCA956X_GPIO_REG_OUT_FUNC1); + + /* Init MDC(GPIO3) / MDIO(GPIO4) */ + reg = readl(regs + AR71XX_GPIO_REG_OE); + reg &= ~BIT(4); + writel(reg, regs + AR71XX_GPIO_REG_OE); + udelay(100); + + reg = readl(regs + AR71XX_GPIO_REG_OE); + reg &= ~BIT(3); + writel(reg, regs + AR71XX_GPIO_REG_OE); + udelay(100); + + /* GPIO3 as MDI */ + reg = readl(regs + QCA956X_GPIO_REG_OUT_FUNC0); + reg &= ~(0xff << 24); + reg |= (0x21 << 24); + writel(reg, regs + QCA956X_GPIO_REG_OUT_FUNC0); + + return 0; +} + +static int eth_init_qca956x(void) +{ + void __iomem *pregs = map_physmem(AR71XX_PLL_BASE, AR71XX_PLL_SIZE, + MAP_NOCACHE); + void __iomem *gregs = map_physmem(AR71XX_MII_BASE, AR71XX_MII_SIZE, + MAP_NOCACHE); + + qca956x_sgmii_cal(); + qca956x_s17_reset(); + qca956x_init_mdio(); + + if (ath79_get_bootstrap() & QCA956X_BOOTSTRAP_REF_CLK_40) + writel(0x45500, pregs + QCA956X_PLL_SWITCH_CLK_CTRL_REG); + else + writel(0xc5200, pregs + QCA956X_PLL_SWITCH_CLK_CTRL_REG); + + qca956x_sgmii_setup(); + + writel((3 << 16) | (3 << 14) | (1 << 0) | (1 << 6), + gregs + QCA956X_GMAC_REG_ETH_CFG); + + writel((1 << 31) | (2 << 28) | (2 << 26) | (1 << 25), + pregs + QCA956X_PLL_ETH_XMII_CTRL_REG); + mdelay(1); + + return 0; +} + int ath79_eth_reset(void) { /* @@ -164,6 +433,8 @@ int ath79_eth_reset(void) return eth_init_ar934x(); if (soc_is_qca953x()) return eth_init_qca953x(); + if (soc_is_qca956x()) + return eth_init_qca956x(); return -EINVAL; } diff --git a/arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb.h b/arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb.h index f6e724588a..493eaad1df 100644 --- a/arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb.h +++ b/arch/mips/mach-mscc/include/mach/servalt/servalt_devcpu_gcb.h @@ -17,4 +17,6 @@ #define GPIO_GPIO_ALT(x) (0x74 + 4 * (x)) #define GPIO_GPIO_ALT1(x) (0x7c + 4 * (x)) +#define GCB_PHY_CFG 0x118 + #endif diff --git a/arch/mips/mach-mt7620/Kconfig b/arch/mips/mach-mt7620/Kconfig index 4ebcb4b053..a983443999 100644 --- a/arch/mips/mach-mt7620/Kconfig +++ b/arch/mips/mach-mt7620/Kconfig @@ -22,12 +22,12 @@ choice prompt "Board select" config BOARD_GARDENA_SMART_GATEWAY_MT7688 - bool "Gardena Smart Gateway" + bool "GARDENA smart Gateway" depends on SOC_MT7620 select BOARD_LATE_INIT select SUPPORTS_BOOT_RAM help - Gardena Smart Gateway boards have a MT7688 SoC with 128 MiB of RAM + GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM and 8 MiB of flash (SPI NOR) and additional SPI NAND storage. config BOARD_LINKIT_SMART_7688 diff --git a/board/mscc/jr2/jr2.c b/board/mscc/jr2/jr2.c index 58a4a04162..6e5ef4c97f 100644 --- a/board/mscc/jr2/jr2.c +++ b/board/mscc/jr2/jr2.c @@ -6,6 +6,7 @@ #include #include #include +#include enum { BOARD_TYPE_PCB110 = 0xAABBCE00, @@ -64,6 +65,28 @@ static void vcoreiii_gpio_set_alternate(int gpio, int mode) } } +int board_phy_config(struct phy_device *phydev) +{ + if (gd->board_type == BOARD_TYPE_PCB110 || + gd->board_type == BOARD_TYPE_PCB112) { + phy_write(phydev, 0, 31, 0x10); + phy_write(phydev, 0, 18, 0x80F0); + while (phy_read(phydev, 0, 18) & 0x8000) + ; + phy_write(phydev, 0, 31, 0); + } + if (gd->board_type == BOARD_TYPE_PCB111) { + phy_write(phydev, 0, 31, 0x10); + phy_write(phydev, 0, 18, 0x80A0); + while (phy_read(phydev, 0, 18) & 0x8000) + ; + phy_write(phydev, 0, 14, 0x800); + phy_write(phydev, 0, 31, 0); + } + + return 0; +} + void board_debug_uart_init(void) { /* too early for the pinctrl driver, so configure the UART pins here */ diff --git a/board/qca/ap152/Kconfig b/board/qca/ap152/Kconfig new file mode 100644 index 0000000000..f6ad498e85 --- /dev/null +++ b/board/qca/ap152/Kconfig @@ -0,0 +1,15 @@ +if TARGET_AP152 + +config SYS_VENDOR + default "qca" + +config SYS_BOARD + default "ap152" + +config SYS_CONFIG_NAME + default "ap152" + +config SYS_TEXT_BASE + default 0x9f000000 + +endif diff --git a/board/qca/ap152/MAINTAINERS b/board/qca/ap152/MAINTAINERS new file mode 100644 index 0000000000..785ec2766d --- /dev/null +++ b/board/qca/ap152/MAINTAINERS @@ -0,0 +1,6 @@ +AP152 BOARD +M: Rosy Song +S: Maintained +F: board/qca/ap152/ +F: include/configs/ap152.h +F: configs/ap152_defconfig diff --git a/board/qca/ap152/Makefile b/board/qca/ap152/Makefile new file mode 100644 index 0000000000..4270afa129 --- /dev/null +++ b/board/qca/ap152/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0+ + +obj-y = ap152.o diff --git a/board/qca/ap152/ap152.c b/board/qca/ap152/ap152.c new file mode 100644 index 0000000000..30cd56563b --- /dev/null +++ b/board/qca/ap152/ap152.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2018 Rosy Song + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define RST_RESET_RTC_RESET_LSB 27 +#define RST_RESET_RTC_RESET_MASK 0x08000000 +#define RST_RESET_RTC_RESET_SET(x) \ + (((x) << RST_RESET_RTC_RESET_LSB) & RST_RESET_RTC_RESET_MASK) + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + void __iomem *regs; + u32 val; + + regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE, + MAP_NOCACHE); + + /* UART : RX18, TX22 done + * GPIO18 as input, GPIO22 as output + */ + val = readl(regs + AR71XX_GPIO_REG_OE); + val |= QCA956X_GPIO(18); + val &= ~QCA956X_GPIO(22); + writel(val, regs + AR71XX_GPIO_REG_OE); + + /* + * Enable GPIO22 as UART0_SOUT + */ + val = readl(regs + QCA956X_GPIO_REG_OUT_FUNC5); + val &= ~QCA956X_GPIO_MUX_MASK(16); + val |= QCA956X_GPIO_OUT_MUX_UART0_SOUT << 16; + writel(val, regs + QCA956X_GPIO_REG_OUT_FUNC5); + + /* + * Enable GPIO18 as UART0_SIN + */ + val = readl(regs + QCA956X_GPIO_REG_IN_ENABLE0); + val &= ~QCA956X_GPIO_MUX_MASK(8); + val |= QCA956X_GPIO_IN_MUX_UART0_SIN << 8; + writel(val, regs + QCA956X_GPIO_REG_IN_ENABLE0); + + /* + * Enable GPIO22 output + */ + val = readl(regs + AR71XX_GPIO_REG_OUT); + val |= QCA956X_GPIO(22); + writel(val, regs + AR71XX_GPIO_REG_OUT); +} +#endif + +int board_early_init_f(void) +{ + u32 reg; + void __iomem *rst_regs = map_physmem(AR71XX_RESET_BASE, + AR71XX_RESET_SIZE, MAP_NOCACHE); + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT + /* CPU:775, DDR:650, AHB:258 */ + qca956x_pll_init(); + qca956x_ddr_init(); +#endif + + /* Take WMAC out of reset */ + reg = readl(rst_regs + QCA956X_RESET_REG_RESET_MODULE); + reg &= (~RST_RESET_RTC_RESET_SET(1)); + writel(reg, rst_regs + QCA956X_RESET_REG_RESET_MODULE); + + ath79_eth_reset(); + return 0; +} diff --git a/configs/ap152_defconfig b/configs/ap152_defconfig new file mode 100644 index 0000000000..21cb6eb742 --- /dev/null +++ b/configs/ap152_defconfig @@ -0,0 +1,49 @@ +CONFIG_MIPS=y +CONFIG_SYS_TEXT_BASE=0x9F000000 +CONFIG_SYS_MALLOC_F_LEN=0x800 +CONFIG_SYS_CACHE_SIZE_AUTO=y +CONFIG_DEBUG_UART_BOARD_INIT=y +CONFIG_DEBUG_UART_BASE=0xb8020000 +CONFIG_DEBUG_UART_CLOCK=25000000 +CONFIG_ARCH_ATH79=y +CONFIG_TARGET_AP152=y +CONFIG_DEBUG_UART=y +CONFIG_BOOTDELAY=3 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs" +CONFIG_DISPLAY_CPUINFO=y +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_SYS_PROMPT="ap152 # " +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_CONSOLE is not set +# CONFIG_CMD_ELF is not set +# CONFIG_CMD_XIMG is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set +# CONFIG_CMD_EDITENV is not set +# CONFIG_CMD_CRC32 is not set +CONFIG_CMD_MEMTEST=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_SF=y +CONFIG_CMD_SPI=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0" +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1472k(uImage),64k(ART)" +# CONFIG_ISO_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="ap152" +CONFIG_ENV_IS_IN_SPI_FLASH=y +# CONFIG_NET is not set +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_SPI_FLASH_DATAFLASH=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_PINCTRL=y +CONFIG_DM_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_ATH79_SPI=y +CONFIG_LZMA=y diff --git a/configs/bcm963158_ram_defconfig b/configs/bcm963158_ram_defconfig index fc55e98550..5659249fdf 100644 --- a/configs/bcm963158_ram_defconfig +++ b/configs/bcm963158_ram_defconfig @@ -20,6 +20,7 @@ CONFIG_CMD_BOOTEFI_SELFTEST=y # CONFIG_CMD_LZMADEC is not set # CONFIG_CMD_UNZIP is not set # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y CONFIG_CMD_CACHE=y CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y @@ -28,6 +29,8 @@ CONFIG_DEFAULT_DEVICE_TREE="bcm963158" # CONFIG_NET is not set CONFIG_BLK=y CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_BCM6345_GPIO=y # CONFIG_MMC is not set CONFIG_SPECIFY_CONSOLE_INDEX=y # CONFIG_SPL_SERIAL_PRESENT is not set diff --git a/configs/bcm968380gerg_ram_defconfig b/configs/bcm968380gerg_ram_defconfig index 61661bd756..fa9dc85d63 100644 --- a/configs/bcm968380gerg_ram_defconfig +++ b/configs/bcm968380gerg_ram_defconfig @@ -24,6 +24,7 @@ CONFIG_CMD_LICENSE=y # CONFIG_CMD_CRC32 is not set CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set +CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set # CONFIG_CMD_MISC is not set CONFIG_DEFAULT_DEVICE_TREE="brcm,bcm968380gerg" @@ -31,6 +32,7 @@ CONFIG_DEFAULT_DEVICE_TREE="brcm,bcm968380gerg" # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_HAVE_BLOCK_DEVICE=y CONFIG_DM_GPIO=y +CONFIG_BCM6345_GPIO=y CONFIG_LED=y CONFIG_LED_BCM6328=y CONFIG_LED_BLINK=y diff --git a/configs/bcm968580xref_ram_defconfig b/configs/bcm968580xref_ram_defconfig index e8cb3a0d2a..456ece72d5 100644 --- a/configs/bcm968580xref_ram_defconfig +++ b/configs/bcm968580xref_ram_defconfig @@ -15,6 +15,7 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_GPIO=y CONFIG_DOS_PARTITION=y CONFIG_ISO_PARTITION=y CONFIG_EFI_PARTITION=y @@ -22,6 +23,8 @@ CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref" # CONFIG_NET is not set CONFIG_BLK=y CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_BCM6345_GPIO=y # CONFIG_MMC is not set CONFIG_SPECIFY_CONSOLE_INDEX=y # CONFIG_SPL_SERIAL_PRESENT is not set diff --git a/configs/linkit-smart-7688-ram_defconfig b/configs/linkit-smart-7688-ram_defconfig index 2d3ab7e35c..649db0f67d 100644 --- a/configs/linkit-smart-7688-ram_defconfig +++ b/configs/linkit-smart-7688-ram_defconfig @@ -20,17 +20,22 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set +CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +CONFIG_CMD_FS_GENERIC=y +# CONFIG_DOS_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y # CONFIG_DM_DEVICE_REMOVE is not set -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_BLK=y CONFIG_CLK=y CONFIG_LED=y CONFIG_LED_BLINK=y @@ -46,6 +51,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_FIXED=y CONFIG_MT7628_ETH=y CONFIG_PHY=y +CONFIG_MT76X8_USB_PHY=y CONFIG_POWER_DOMAIN=y CONFIG_RAM=y CONFIG_DM_RESET=y @@ -54,5 +60,12 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MT7621_SPI=y CONFIG_SYSRESET_SYSCON=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_FS_EXT4=y +CONFIG_FS_FAT=y CONFIG_LZMA=y CONFIG_LZO=y diff --git a/configs/linkit-smart-7688_defconfig b/configs/linkit-smart-7688_defconfig index ad34aaf640..41aa900e56 100644 --- a/configs/linkit-smart-7688_defconfig +++ b/configs/linkit-smart-7688_defconfig @@ -24,17 +24,22 @@ CONFIG_CMD_MEMINFO=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y # CONFIG_CMD_LOADS is not set +CONFIG_CMD_MTD=y +CONFIG_CMD_PART=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_TIME=y +CONFIG_CMD_FS_GENERIC=y +# CONFIG_DOS_PARTITION is not set CONFIG_DEFAULT_DEVICE_TREE="linkit-smart-7688" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_NET_RANDOM_ETHADDR=y # CONFIG_DM_DEVICE_REMOVE is not set -CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_BLK=y CONFIG_CLK=y CONFIG_LED=y CONFIG_LED_BLINK=y @@ -50,6 +55,7 @@ CONFIG_PHYLIB=y CONFIG_PHY_FIXED=y CONFIG_MT7628_ETH=y CONFIG_PHY=y +CONFIG_MT76X8_USB_PHY=y CONFIG_POWER_DOMAIN=y CONFIG_RAM=y CONFIG_DM_RESET=y @@ -58,5 +64,12 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_MT7621_SPI=y CONFIG_SYSRESET_SYSCON=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_STORAGE=y +CONFIG_FS_EXT4=y +CONFIG_FS_FAT=y CONFIG_LZMA=y CONFIG_LZO=y diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig index 95562b7cd8..92c22b8a84 100644 --- a/configs/mscc_jr2_defconfig +++ b/configs/mscc_jr2_defconfig @@ -28,7 +28,10 @@ CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set +CONFIG_CMD_DHCP=y +# CONFIG_NET_TFTP_VARS is not set +# CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)" @@ -66,3 +69,4 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_LZMA=y +CONFIG_MSCC_JR2_SWITCH=y diff --git a/configs/mscc_servalt_defconfig b/configs/mscc_servalt_defconfig index 027aaa44d5..33d43dede5 100644 --- a/configs/mscc_servalt_defconfig +++ b/configs/mscc_servalt_defconfig @@ -24,7 +24,6 @@ CONFIG_CMD_MEMTEST=y CONFIG_CMD_GPIO=y CONFIG_CMD_SF=y CONFIG_CMD_SPI=y -# CONFIG_CMD_NET is not set CONFIG_CMD_MTDPARTS=y CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)" @@ -59,3 +58,8 @@ CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_LZMA=y +CONFIG_CMD_DHCP=y +# CONFIG_NET_TFTP_VARS is not set +# CONFIG_CMD_NFS is not set +CONFIG_CMD_PING=y +CONFIG_MSCC_SERVALT_SWITCH=y diff --git a/drivers/dma/bcm6348-iudma.c b/drivers/dma/bcm6348-iudma.c index 1d3c192cfe..e7bd1b2350 100644 --- a/drivers/dma/bcm6348-iudma.c +++ b/drivers/dma/bcm6348-iudma.c @@ -324,6 +324,9 @@ static int bcm6348_iudma_receive(struct dma *dma, void **dst, void *metadata) struct bcm6348_dma_desc *dma_desc = dma_desc = ch_priv->dma_ring; int ret; + if (!ch_priv->running) + return -EINVAL; + /* get dma ring descriptor address */ dma_desc += ch_priv->desc_id; @@ -369,6 +372,9 @@ static int bcm6348_iudma_send(struct dma *dma, void *src, size_t len, struct bcm6348_dma_desc *dma_desc; uint16_t status; + if (!ch_priv->running) + return -EINVAL; + /* flush cache */ bcm6348_iudma_fdc(src, len); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b103180cf3..b3e4ecc50e 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -23,7 +23,7 @@ config ALTERA_PIO config BCM6345_GPIO bool "BCM6345 GPIO driver" - depends on DM_GPIO && ARCH_BMIPS + depends on DM_GPIO && (ARCH_BMIPS || ARCH_BCM6858 || ARCH_BCM63158) help This driver supports the GPIO banks on BCM6345 SoCs. diff --git a/drivers/gpio/bcm6345_gpio.c b/drivers/gpio/bcm6345_gpio.c index d1f6cfa840..71a978cf40 100644 --- a/drivers/gpio/bcm6345_gpio.c +++ b/drivers/gpio/bcm6345_gpio.c @@ -22,7 +22,7 @@ static int bcm6345_gpio_get_value(struct udevice *dev, unsigned offset) { struct bcm6345_gpio_priv *priv = dev_get_priv(dev); - return !!(readl_be(priv->reg_data) & BIT(offset)); + return !!(readl(priv->reg_data) & BIT(offset)); } static int bcm6345_gpio_set_value(struct udevice *dev, unsigned offset, @@ -31,9 +31,9 @@ static int bcm6345_gpio_set_value(struct udevice *dev, unsigned offset, struct bcm6345_gpio_priv *priv = dev_get_priv(dev); if (value) - setbits_be32(priv->reg_data, BIT(offset)); + setbits_32(priv->reg_data, BIT(offset)); else - clrbits_be32(priv->reg_data, BIT(offset)); + clrbits_32(priv->reg_data, BIT(offset)); return 0; } @@ -42,9 +42,9 @@ static int bcm6345_gpio_set_direction(void __iomem *dirout, unsigned offset, bool input) { if (input) - clrbits_be32(dirout, BIT(offset)); + clrbits_32(dirout, BIT(offset)); else - setbits_be32(dirout, BIT(offset)); + setbits_32(dirout, BIT(offset)); return 0; } @@ -70,7 +70,7 @@ static int bcm6345_gpio_get_function(struct udevice *dev, unsigned offset) { struct bcm6345_gpio_priv *priv = dev_get_priv(dev); - if (readl_be(priv->reg_dirout) & BIT(offset)) + if (readl(priv->reg_dirout) & BIT(offset)) return GPIOF_OUTPUT; else return GPIOF_INPUT; diff --git a/drivers/net/ag7xxx.c b/drivers/net/ag7xxx.c index 8146c3170e..7f1dee4b3e 100644 --- a/drivers/net/ag7xxx.c +++ b/drivers/net/ag7xxx.c @@ -3,6 +3,7 @@ * Atheros AR71xx / AR9xxx GMAC driver * * Copyright (C) 2016 Marek Vasut + * Copyright (C) 2019 Rosy Song */ #include @@ -23,6 +24,8 @@ DECLARE_GLOBAL_DATA_PTR; enum ag7xxx_model { AG7XXX_MODEL_AG933X, AG7XXX_MODEL_AG934X, + AG7XXX_MODEL_AG953X, + AG7XXX_MODEL_AG956X }; /* MAC Configuration 1 */ @@ -99,8 +102,29 @@ enum ag7xxx_model { /* Rx Status */ #define AG7XXX_ETH_DMA_RX_STATUS 0x194 +/* Custom register at 0x1805002C */ +#define AG7XXX_ETH_XMII 0x2C +#define AG7XXX_ETH_XMII_TX_INVERT BIT(31) +#define AG7XXX_ETH_XMII_RX_DELAY_LSB 28 +#define AG7XXX_ETH_XMII_RX_DELAY_MASK 0x30000000 +#define AG7XXX_ETH_XMII_RX_DELAY_SET(x) \ + (((x) << AG7XXX_ETH_XMII_RX_DELAY_LSB) & AG7XXX_ETH_XMII_RX_DELAY_MASK) +#define AG7XXX_ETH_XMII_TX_DELAY_LSB 26 +#define AG7XXX_ETH_XMII_TX_DELAY_MASK 0x0c000000 +#define AG7XXX_ETH_XMII_TX_DELAY_SET(x) \ + (((x) << AG7XXX_ETH_XMII_TX_DELAY_LSB) & AG7XXX_ETH_XMII_TX_DELAY_MASK) +#define AG7XXX_ETH_XMII_GIGE BIT(25) + /* Custom register at 0x18070000 */ #define AG7XXX_GMAC_ETH_CFG 0x00 +#define AG7XXX_ETH_CFG_RXDV_DELAY_LSB 16 +#define AG7XXX_ETH_CFG_RXDV_DELAY_MASK 0x00030000 +#define AG7XXX_ETH_CFG_RXDV_DELAY_SET(x) \ + (((x) << AG7XXX_ETH_CFG_RXDV_DELAY_LSB) & AG7XXX_ETH_CFG_RXDV_DELAY_MASK) +#define AG7XXX_ETH_CFG_RXD_DELAY_LSB 14 +#define AG7XXX_ETH_CFG_RXD_DELAY_MASK 0x0000c000 +#define AG7XXX_ETH_CFG_RXD_DELAY_SET(x) \ + (((x) << AG7XXX_ETH_CFG_RXD_DELAY_LSB) & AG7XXX_ETH_CFG_RXD_DELAY_MASK) #define AG7XXX_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8) #define AG7XXX_ETH_CFG_SW_PHY_SWAP BIT(7) #define AG7XXX_ETH_CFG_SW_ONLY_MODE BIT(6) @@ -197,24 +221,33 @@ static int ag7xxx_switch_reg_read(struct mii_dev *bus, int reg, u32 *val) u32 reg_addr; u32 phy_temp; u32 reg_temp; + u32 reg_temp_w = (reg & 0xfffffffc) >> 1; u16 rv = 0; int ret; - if (priv->model == AG7XXX_MODEL_AG933X) { + if (priv->model == AG7XXX_MODEL_AG933X || + priv->model == AG7XXX_MODEL_AG953X) { phy_addr = 0x1f; reg_addr = 0x10; - } else if (priv->model == AG7XXX_MODEL_AG934X) { + } else if (priv->model == AG7XXX_MODEL_AG934X || + priv->model == AG7XXX_MODEL_AG956X) { phy_addr = 0x18; reg_addr = 0x00; } else return -EINVAL; - ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9); + if (priv->model == AG7XXX_MODEL_AG956X) + ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, (reg >> 9) & 0x1ff); + else + ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9); if (ret) return ret; phy_temp = ((reg >> 6) & 0x7) | 0x10; - reg_temp = (reg >> 1) & 0x1e; + if (priv->model == AG7XXX_MODEL_AG956X) + reg_temp = reg_temp_w & 0x1f; + else + reg_temp = (reg >> 1) & 0x1e; *val = 0; ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 0, &rv); @@ -222,7 +255,13 @@ static int ag7xxx_switch_reg_read(struct mii_dev *bus, int reg, u32 *val) return ret; *val |= rv; - ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv); + if (priv->model == AG7XXX_MODEL_AG956X) { + phy_temp = (((reg_temp_w + 1) >> 5) & 0x7) | 0x10; + reg_temp = (reg_temp_w + 1) & 0x1f; + ret = ag7xxx_switch_read(bus, phy_temp, reg_temp, &rv); + } else { + ret = ag7xxx_switch_read(bus, phy_temp, reg_temp | 1, &rv); + } if (ret < 0) return ret; *val |= (rv << 16); @@ -237,23 +276,34 @@ static int ag7xxx_switch_reg_write(struct mii_dev *bus, int reg, u32 val) u32 reg_addr; u32 phy_temp; u32 reg_temp; + u32 reg_temp_w = (reg & 0xfffffffc) >> 1; int ret; - if (priv->model == AG7XXX_MODEL_AG933X) { + if (priv->model == AG7XXX_MODEL_AG933X || + priv->model == AG7XXX_MODEL_AG953X) { phy_addr = 0x1f; reg_addr = 0x10; - } else if (priv->model == AG7XXX_MODEL_AG934X) { + } else if (priv->model == AG7XXX_MODEL_AG934X || + priv->model == AG7XXX_MODEL_AG956X) { phy_addr = 0x18; reg_addr = 0x00; } else return -EINVAL; - ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9); + if (priv->model == AG7XXX_MODEL_AG956X) + ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, (reg >> 9) & 0x1ff); + else + ret = ag7xxx_switch_write(bus, phy_addr, reg_addr, reg >> 9); if (ret) return ret; - phy_temp = ((reg >> 6) & 0x7) | 0x10; - reg_temp = (reg >> 1) & 0x1e; + if (priv->model == AG7XXX_MODEL_AG956X) { + reg_temp = (reg_temp_w + 1) & 0x1f; + phy_temp = (((reg_temp_w + 1) >> 5) & 0x7) | 0x10; + } else { + phy_temp = ((reg >> 6) & 0x7) | 0x10; + reg_temp = (reg >> 1) & 0x1e; + } /* * The switch on AR933x has some special register behavior, which @@ -272,10 +322,18 @@ static int ag7xxx_switch_reg_write(struct mii_dev *bus, int reg, u32 val) if (ret < 0) return ret; } else { - ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16); + if (priv->model == AG7XXX_MODEL_AG956X) + ret = ag7xxx_switch_write(bus, phy_temp, reg_temp, val >> 16); + else + ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 1, val >> 16); if (ret < 0) return ret; + if (priv->model == AG7XXX_MODEL_AG956X) { + phy_temp = ((reg_temp_w >> 5) & 0x7) | 0x10; + reg_temp = reg_temp_w & 0x1f; + } + ret = ag7xxx_switch_write(bus, phy_temp, reg_temp | 0, val & 0xffff); if (ret < 0) return ret; @@ -598,10 +656,19 @@ static int ag7xxx_mii_setup(struct udevice *dev) return 0; } - if (priv->model == AG7XXX_MODEL_AG934X) { - writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | 0x4, + if (priv->model == AG7XXX_MODEL_AG934X) + reg = 0x4; + else if (priv->model == AG7XXX_MODEL_AG953X) + reg = 0x2; + else if (priv->model == AG7XXX_MODEL_AG956X) + reg = 0x7; + + if (priv->model == AG7XXX_MODEL_AG934X || + priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) { + writel(AG7XXX_ETH_MII_MGMT_CFG_RESET | reg, priv->regs + AG7XXX_ETH_MII_MGMT_CFG); - writel(0x4, priv->regs + AG7XXX_ETH_MII_MGMT_CFG); + writel(reg, priv->regs + AG7XXX_ETH_MII_MGMT_CFG); return 0; } @@ -698,14 +765,126 @@ static int ag933x_phy_setup_lan(struct udevice *dev) return 0; } +static int ag953x_phy_setup_wan(struct udevice *dev) +{ + int ret; + u32 reg = 0; + struct ar7xxx_eth_priv *priv = dev_get_priv(dev); + + /* Set wan port connect to GE0 */ + ret = ag7xxx_switch_reg_read(priv->bus, 0x8, ®); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x8, reg | BIT(28)); + if (ret) + return ret; + + /* Configure switch port 4 (GMAC0) */ + ret = ag7xxx_switch_write(priv->bus, 4, MII_BMCR, 0x9000); + if (ret) + return ret; + + return 0; +} + +static int ag953x_phy_setup_lan(struct udevice *dev) +{ + struct ar7xxx_eth_priv *priv = dev_get_priv(dev); + int i, ret; + u32 reg = 0; + + /* Reset the switch */ + ret = ag7xxx_switch_reg_read(priv->bus, 0, ®); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0, reg | BIT(31)); + if (ret) + return ret; + + do { + ret = ag7xxx_switch_reg_read(priv->bus, 0, ®); + if (ret) + return ret; + } while (reg & BIT(31)); + + ret = ag7xxx_switch_reg_write(priv->bus, 0x100, 0x4e); + if (ret) + return ret; + + /* Set GMII mode */ + ret = ag7xxx_switch_reg_read(priv->bus, 0x4, ®); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x4, reg | BIT(6)); + if (ret) + return ret; + + /* Configure switch ports 0...4 (GMAC1) */ + for (i = 0; i < 5; i++) { + ret = ag7xxx_switch_write(priv->bus, i, MII_BMCR, 0x9000); + if (ret) + return ret; + } + + for (i = 0; i < 5; i++) { + ret = ag7xxx_switch_reg_write(priv->bus, (i + 2) * 0x100, BIT(9)); + if (ret) + return ret; + } + + /* QM Control */ + ret = ag7xxx_switch_reg_write(priv->bus, 0x38, 0xc000050e); + if (ret) + return ret; + + /* Disable Atheros header */ + ret = ag7xxx_switch_reg_write(priv->bus, 0x104, 0x4004); + if (ret) + return ret; + + /* Tag priority mapping */ + ret = ag7xxx_switch_reg_write(priv->bus, 0x70, 0xfa50); + if (ret) + return ret; + + /* Enable ARP packets to the CPU */ + ret = ag7xxx_switch_reg_read(priv->bus, 0x5c, ®); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x5c, reg | 0x100000); + if (ret) + return ret; + + /* Enable broadcast packets to the CPU */ + ret = ag7xxx_switch_reg_read(priv->bus, 0x2c, ®); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x2c, reg | BIT(25) | BIT(26)); + if (ret) + return ret; + + return 0; +} + static int ag933x_phy_setup_reset_set(struct udevice *dev, int port) { struct ar7xxx_eth_priv *priv = dev_get_priv(dev); int ret; - ret = ag7xxx_mdio_write(priv->bus, port, 0, MII_ADVERTISE, - ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | - ADVERTISE_PAUSE_ASYM); + if (priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) { + ret = ag7xxx_switch_write(priv->bus, port, MII_ADVERTISE, + ADVERTISE_ALL); + } else { + ret = ag7xxx_mdio_write(priv->bus, port, 0, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + } if (ret) return ret; @@ -714,8 +893,18 @@ static int ag933x_phy_setup_reset_set(struct udevice *dev, int port) ADVERTISE_1000FULL); if (ret) return ret; + } else if (priv->model == AG7XXX_MODEL_AG956X) { + ret = ag7xxx_switch_write(priv->bus, port, MII_CTRL1000, + ADVERTISE_1000FULL); + if (ret) + return ret; } + if (priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) + return ag7xxx_switch_write(priv->bus, port, MII_BMCR, + BMCR_ANENABLE | BMCR_RESET); + return ag7xxx_mdio_write(priv->bus, port, 0, MII_BMCR, BMCR_ANENABLE | BMCR_RESET); } @@ -724,13 +913,24 @@ static int ag933x_phy_setup_reset_fin(struct udevice *dev, int port) { struct ar7xxx_eth_priv *priv = dev_get_priv(dev); int ret; + u16 reg; - do { - ret = ag7xxx_mdio_read(priv->bus, port, 0, MII_BMCR); - if (ret < 0) - return ret; - mdelay(10); - } while (ret & BMCR_RESET); + if (priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) { + do { + ret = ag7xxx_switch_read(priv->bus, port, MII_BMCR, ®); + if (ret < 0) + return ret; + mdelay(10); + } while (reg & BMCR_RESET); + } else { + do { + ret = ag7xxx_mdio_read(priv->bus, port, 0, MII_BMCR); + if (ret < 0) + return ret; + mdelay(10); + } while (ret & BMCR_RESET); + } return 0; } @@ -739,10 +939,13 @@ static int ag933x_phy_setup_common(struct udevice *dev) { struct ar7xxx_eth_priv *priv = dev_get_priv(dev); int i, ret, phymax; + u16 reg; if (priv->model == AG7XXX_MODEL_AG933X) phymax = 4; - else if (priv->model == AG7XXX_MODEL_AG934X) + else if (priv->model == AG7XXX_MODEL_AG934X || + priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) phymax = 5; else return -EINVAL; @@ -757,7 +960,10 @@ static int ag933x_phy_setup_common(struct udevice *dev) return ret; /* Read out link status */ - ret = ag7xxx_mdio_read(priv->bus, phymax, 0, MII_MIPSCR); + if (priv->model == AG7XXX_MODEL_AG953X) + ret = ag7xxx_switch_read(priv->bus, phymax, MII_MIPSCR, ®); + else + ret = ag7xxx_mdio_read(priv->bus, phymax, 0, MII_MIPSCR); if (ret < 0) return ret; @@ -779,7 +985,11 @@ static int ag933x_phy_setup_common(struct udevice *dev) for (i = 0; i < phymax; i++) { /* Read out link status */ - ret = ag7xxx_mdio_read(priv->bus, i, 0, MII_MIPSCR); + if (priv->model == AG7XXX_MODEL_AG953X || + priv->model == AG7XXX_MODEL_AG956X) + ret = ag7xxx_switch_read(priv->bus, i, MII_MIPSCR, ®); + else + ret = ag7xxx_mdio_read(priv->bus, i, 0, MII_MIPSCR); if (ret < 0) return ret; } @@ -841,6 +1051,63 @@ static int ag934x_phy_setup(struct udevice *dev) return 0; } +static int ag956x_phy_setup(struct udevice *dev) +{ + struct ar7xxx_eth_priv *priv = dev_get_priv(dev); + int i, ret; + u32 reg, ctrl; + + ret = ag7xxx_switch_reg_read(priv->bus, 0x0, ®); + if (ret) + return ret; + if ((reg & 0xffff) >= 0x1301) + ctrl = 0xc74164de; + else + ctrl = 0xc74164d0; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x4, BIT(7)); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0xe0, ctrl); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x624, 0x7f7f7f7f); + if (ret) + return ret; + + /* + * Values suggested by the switch team when s17 in sgmii + * configuration. 0x10(S17_PWS_REG) = 0x602613a0 + */ + ret = ag7xxx_switch_reg_write(priv->bus, 0x10, 0x602613a0); + if (ret) + return ret; + + ret = ag7xxx_switch_reg_write(priv->bus, 0x7c, 0x0000007e); + if (ret) + return ret; + + /* AR8337/AR8334 v1.0 fixup */ + ret = ag7xxx_switch_reg_read(priv->bus, 0, ®); + if (ret) + return ret; + if ((reg & 0xffff) == 0x1301) { + for (i = 0; i < 5; i++) { + /* Turn on Gigabit clock */ + ret = ag7xxx_switch_write(priv->bus, i, 0x1d, 0x3d); + if (ret) + return ret; + ret = ag7xxx_switch_write(priv->bus, i, 0x1e, 0x6820); + if (ret) + return ret; + } + } + + return 0; +} + static int ag7xxx_mac_probe(struct udevice *dev) { struct ar7xxx_eth_priv *priv = dev_get_priv(dev); @@ -858,8 +1125,15 @@ static int ag7xxx_mac_probe(struct udevice *dev) ret = ag933x_phy_setup_wan(dev); else ret = ag933x_phy_setup_lan(dev); + } else if (priv->model == AG7XXX_MODEL_AG953X) { + if (priv->interface == PHY_INTERFACE_MODE_RMII) + ret = ag953x_phy_setup_wan(dev); + else + ret = ag953x_phy_setup_lan(dev); } else if (priv->model == AG7XXX_MODEL_AG934X) { ret = ag934x_phy_setup(dev); + } else if (priv->model == AG7XXX_MODEL_AG956X) { + ret = ag956x_phy_setup(dev); } else { return -EINVAL; } @@ -997,6 +1271,8 @@ static int ag7xxx_eth_ofdata_to_platdata(struct udevice *dev) static const struct udevice_id ag7xxx_eth_ids[] = { { .compatible = "qca,ag933x-mac", .data = AG7XXX_MODEL_AG933X }, { .compatible = "qca,ag934x-mac", .data = AG7XXX_MODEL_AG934X }, + { .compatible = "qca,ag953x-mac", .data = AG7XXX_MODEL_AG953X }, + { .compatible = "qca,ag956x-mac", .data = AG7XXX_MODEL_AG956X }, { } }; diff --git a/drivers/net/mscc_eswitch/Kconfig b/drivers/net/mscc_eswitch/Kconfig index 88e5a97c4b..6359d0b610 100644 --- a/drivers/net/mscc_eswitch/Kconfig +++ b/drivers/net/mscc_eswitch/Kconfig @@ -15,3 +15,17 @@ config MSCC_LUTON_SWITCH select PHYLIB help This driver supports the Luton network switch device. + +config MSCC_JR2_SWITCH + bool "Jaguar2 switch driver" + depends on DM_ETH && ARCH_MSCC + select PHYLIB + help + This driver supports the Jaguar2 network switch device. + +config MSCC_SERVALT_SWITCH + bool "Servalt switch driver" + depends on DM_ETH && ARCH_MSCC + select PHYLIB + help + This driver supports the Servalt network switch device. diff --git a/drivers/net/mscc_eswitch/Makefile b/drivers/net/mscc_eswitch/Makefile index 751a839a5f..bffd8ec77b 100644 --- a/drivers/net/mscc_eswitch/Makefile +++ b/drivers/net/mscc_eswitch/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_MSCC_OCELOT_SWITCH) += ocelot_switch.o mscc_miim.o mscc_xfer.o mscc_mac_table.o obj-$(CONFIG_MSCC_LUTON_SWITCH) += luton_switch.o mscc_miim.o mscc_xfer.o mscc_mac_table.o +obj-$(CONFIG_MSCC_JR2_SWITCH) += jr2_switch.o mscc_xfer.o +obj-$(CONFIG_MSCC_SERVALT_SWITCH) += servalt_switch.o mscc_xfer.o diff --git a/drivers/net/mscc_eswitch/jr2_switch.c b/drivers/net/mscc_eswitch/jr2_switch.c new file mode 100644 index 0000000000..60d408f1c7 --- /dev/null +++ b/drivers/net/mscc_eswitch/jr2_switch.c @@ -0,0 +1,1075 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "mscc_xfer.h" + +#define GCB_MIIM_MII_STATUS 0x0 +#define GCB_MIIM_STAT_BUSY BIT(3) +#define GCB_MIIM_MII_CMD 0x8 +#define GCB_MIIM_MII_CMD_SCAN BIT(0) +#define GCB_MIIM_MII_CMD_OPR_WRITE BIT(1) +#define GCB_MIIM_MII_CMD_OPR_READ BIT(2) +#define GCB_MIIM_MII_CMD_SINGLE_SCAN BIT(3) +#define GCB_MIIM_MII_CMD_WRDATA(x) ((x) << 4) +#define GCB_MIIM_MII_CMD_REGAD(x) ((x) << 20) +#define GCB_MIIM_MII_CMD_PHYAD(x) ((x) << 25) +#define GCB_MIIM_MII_CMD_VLD BIT(31) +#define GCB_MIIM_DATA 0xC +#define GCB_MIIM_DATA_ERROR (0x3 << 16) + +#define ANA_AC_RAM_CTRL_RAM_INIT 0x94358 +#define ANA_AC_STAT_GLOBAL_CFG_PORT_RESET 0x94370 + +#define ANA_CL_PORT_VLAN_CFG(x) (0x24018 + 0xc8 * (x)) +#define ANA_CL_PORT_VLAN_CFG_AWARE_ENA BIT(19) +#define ANA_CL_PORT_VLAN_CFG_POP_CNT(x) ((x) << 17) + +#define ANA_L2_COMMON_FWD_CFG 0x8a2a8 +#define ANA_L2_COMMON_FWD_CFG_CPU_DMAC_COPY_ENA BIT(6) + +#define ASM_CFG_STAT_CFG 0x3508 +#define ASM_CFG_PORT(x) (0x36c4 + 0x4 * (x)) +#define ASM_CFG_PORT_NO_PREAMBLE_ENA BIT(8) +#define ASM_CFG_PORT_INJ_FORMAT_CFG(x) ((x) << 1) +#define ASM_RAM_CTRL_RAM_INIT 0x39b8 + +#define DEV_DEV_CFG_DEV_RST_CTRL 0x0 +#define DEV_DEV_CFG_DEV_RST_CTRL_SPEED_SEL(x) ((x) << 20) +#define DEV_MAC_CFG_MAC_ENA 0x1c +#define DEV_MAC_CFG_MAC_ENA_RX_ENA BIT(4) +#define DEV_MAC_CFG_MAC_ENA_TX_ENA BIT(0) +#define DEV_MAC_CFG_MAC_IFG 0x34 +#define DEV_MAC_CFG_MAC_IFG_TX_IFG(x) ((x) << 8) +#define DEV_MAC_CFG_MAC_IFG_RX_IFG2(x) ((x) << 4) +#define DEV_MAC_CFG_MAC_IFG_RX_IFG1(x) (x) +#define DEV_PCS1G_CFG_PCS1G_CFG 0x40 +#define DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA BIT(0) +#define DEV_PCS1G_CFG_PCS1G_MODE 0x44 +#define DEV_PCS1G_CFG_PCS1G_SD 0x48 +#define DEV_PCS1G_CFG_PCS1G_ANEG 0x4c +#define DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(x) ((x) << 16) + +#define DSM_RAM_CTRL_RAM_INIT 0x8 + +#define HSIO_ANA_SERDES1G_DES_CFG 0xac +#define HSIO_ANA_SERDES1G_DES_CFG_BW_HYST(x) ((x) << 1) +#define HSIO_ANA_SERDES1G_DES_CFG_BW_ANA(x) ((x) << 5) +#define HSIO_ANA_SERDES1G_DES_CFG_MBTR_CTRL(x) ((x) << 8) +#define HSIO_ANA_SERDES1G_DES_CFG_PHS_CTRL(x) ((x) << 13) +#define HSIO_ANA_SERDES1G_IB_CFG 0xb0 +#define HSIO_ANA_SERDES1G_IB_CFG_RESISTOR_CTRL(x) (x) +#define HSIO_ANA_SERDES1G_IB_CFG_EQ_GAIN(x) ((x) << 6) +#define HSIO_ANA_SERDES1G_IB_CFG_ENA_OFFSET_COMP BIT(9) +#define HSIO_ANA_SERDES1G_IB_CFG_ENA_DETLEV BIT(11) +#define HSIO_ANA_SERDES1G_IB_CFG_ENA_CMV_TERM BIT(13) +#define HSIO_ANA_SERDES1G_IB_CFG_DET_LEV(x) ((x) << 19) +#define HSIO_ANA_SERDES1G_IB_CFG_ACJTAG_HYST(x) ((x) << 24) +#define HSIO_ANA_SERDES1G_OB_CFG 0xb4 +#define HSIO_ANA_SERDES1G_OB_CFG_RESISTOR_CTRL(x) (x) +#define HSIO_ANA_SERDES1G_OB_CFG_VCM_CTRL(x) ((x) << 4) +#define HSIO_ANA_SERDES1G_OB_CFG_CMM_BIAS_CTRL(x) ((x) << 10) +#define HSIO_ANA_SERDES1G_OB_CFG_AMP_CTRL(x) ((x) << 13) +#define HSIO_ANA_SERDES1G_OB_CFG_SLP(x) ((x) << 17) +#define HSIO_ANA_SERDES1G_SER_CFG 0xb8 +#define HSIO_ANA_SERDES1G_COMMON_CFG 0xbc +#define HSIO_ANA_SERDES1G_COMMON_CFG_IF_MODE BIT(0) +#define HSIO_ANA_SERDES1G_COMMON_CFG_ENA_LANE BIT(18) +#define HSIO_ANA_SERDES1G_COMMON_CFG_SYS_RST BIT(31) +#define HSIO_ANA_SERDES1G_PLL_CFG 0xc0 +#define HSIO_ANA_SERDES1G_PLL_CFG_FSM_ENA BIT(7) +#define HSIO_ANA_SERDES1G_PLL_CFG_FSM_CTRL_DATA(x) ((x) << 8) +#define HSIO_ANA_SERDES1G_PLL_CFG_ENA_RC_DIV2 BIT(21) +#define HSIO_DIG_SERDES1G_DFT_CFG0 0xc8 +#define HSIO_DIG_SERDES1G_TP_CFG 0xd4 +#define HSIO_DIG_SERDES1G_MISC_CFG 0xdc +#define HSIO_DIG_SERDES1G_MISC_CFG_LANE_RST BIT(0) +#define HSIO_MCB_SERDES1G_CFG 0xe8 +#define HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT BIT(31) +#define HSIO_MCB_SERDES1G_CFG_ADDR(x) (x) + +#define HSIO_ANA_SERDES6G_DES_CFG 0x11c +#define HSIO_ANA_SERDES6G_DES_CFG_SWAP_ANA BIT(0) +#define HSIO_ANA_SERDES6G_DES_CFG_BW_ANA(x) ((x) << 1) +#define HSIO_ANA_SERDES6G_DES_CFG_SWAP_HYST BIT(4) +#define HSIO_ANA_SERDES6G_DES_CFG_BW_HYST(x) ((x) << 5) +#define HSIO_ANA_SERDES6G_DES_CFG_CPMD_SEL(x) ((x) << 8) +#define HSIO_ANA_SERDES6G_DES_CFG_MBTR_CTRL(x) ((x) << 10) +#define HSIO_ANA_SERDES6G_DES_CFG_PHS_CTRL(x) ((x) << 13) +#define HSIO_ANA_SERDES6G_IB_CFG 0x120 +#define HSIO_ANA_SERDES6G_IB_CFG_REG_ENA BIT(0) +#define HSIO_ANA_SERDES6G_IB_CFG_EQZ_ENA BIT(1) +#define HSIO_ANA_SERDES6G_IB_CFG_SAM_ENA BIT(2) +#define HSIO_ANA_SERDES6G_IB_CFG_CAL_ENA(x) ((x) << 3) +#define HSIO_ANA_SERDES6G_IB_CFG_CONCUR BIT(4) +#define HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_ENA BIT(5) +#define HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_OFF(x) ((x) << 7) +#define HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_LP(x) ((x) << 9) +#define HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_MID(x) ((x) << 11) +#define HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_HP(x) ((x) << 13) +#define HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_CLK_SEL(x) ((x) << 15) +#define HSIO_ANA_SERDES6G_IB_CFG_TERM_MODE_SEL(x) ((x) << 18) +#define HSIO_ANA_SERDES6G_IB_CFG_ICML_ADJ(x) ((x) << 20) +#define HSIO_ANA_SERDES6G_IB_CFG_RTRM_ADJ(x) ((x) << 24) +#define HSIO_ANA_SERDES6G_IB_CFG_VBULK_SEL BIT(28) +#define HSIO_ANA_SERDES6G_IB_CFG_SOFSI(x) ((x) << 29) +#define HSIO_ANA_SERDES6G_IB_CFG1 0x124 +#define HSIO_ANA_SERDES6G_IB_CFG1_FILT_OFFSET BIT(4) +#define HSIO_ANA_SERDES6G_IB_CFG1_FILT_LP BIT(5) +#define HSIO_ANA_SERDES6G_IB_CFG1_FILT_MID BIT(6) +#define HSIO_ANA_SERDES6G_IB_CFG1_FILT_HP BIT(7) +#define HSIO_ANA_SERDES6G_IB_CFG1_SCALY(x) ((x) << 8) +#define HSIO_ANA_SERDES6G_IB_CFG1_TSDET(x) ((x) << 12) +#define HSIO_ANA_SERDES6G_IB_CFG1_TJTAG(x) ((x) << 17) +#define HSIO_ANA_SERDES6G_IB_CFG2 0x128 +#define HSIO_ANA_SERDES6G_IB_CFG2_UREG(x) (x) +#define HSIO_ANA_SERDES6G_IB_CFG2_UMAX(x) ((x) << 3) +#define HSIO_ANA_SERDES6G_IB_CFG2_TCALV(x) ((x) << 5) +#define HSIO_ANA_SERDES6G_IB_CFG2_OCALS(x) ((x) << 10) +#define HSIO_ANA_SERDES6G_IB_CFG2_OINFS(x) ((x) << 16) +#define HSIO_ANA_SERDES6G_IB_CFG2_OINFI(x) ((x) << 22) +#define HSIO_ANA_SERDES6G_IB_CFG2_TINFV(x) ((x) << 27) +#define HSIO_ANA_SERDES6G_IB_CFG3 0x12c +#define HSIO_ANA_SERDES6G_IB_CFG3_INI_OFFSET(x) (x) +#define HSIO_ANA_SERDES6G_IB_CFG3_INI_LP(x) ((x) << 6) +#define HSIO_ANA_SERDES6G_IB_CFG3_INI_MID(x) ((x) << 12) +#define HSIO_ANA_SERDES6G_IB_CFG3_INI_HP(x) ((x) << 18) +#define HSIO_ANA_SERDES6G_IB_CFG4 0x130 +#define HSIO_ANA_SERDES6G_IB_CFG4_MAX_OFFSET(x) (x) +#define HSIO_ANA_SERDES6G_IB_CFG4_MAX_LP(x) ((x) << 6) +#define HSIO_ANA_SERDES6G_IB_CFG4_MAX_MID(x) ((x) << 12) +#define HSIO_ANA_SERDES6G_IB_CFG4_MAX_HP(x) ((x) << 18) +#define HSIO_ANA_SERDES6G_IB_CFG5 0x134 +#define HSIO_ANA_SERDES6G_IB_CFG4_MIN_OFFSET(x) (x) +#define HSIO_ANA_SERDES6G_IB_CFG4_MIN_LP(x) ((x) << 6) +#define HSIO_ANA_SERDES6G_IB_CFG4_MIN_MID(x) ((x) << 12) +#define HSIO_ANA_SERDES6G_IB_CFG4_MIN_HP(x) ((x) << 18) +#define HSIO_ANA_SERDES6G_OB_CFG 0x138 +#define HSIO_ANA_SERDES6G_OB_CFG_RESISTOR_CTRL(x) (x) +#define HSIO_ANA_SERDES6G_OB_CFG_SR(x) ((x) << 4) +#define HSIO_ANA_SERDES6G_OB_CFG_SR_H BIT(8) +#define HSIO_ANA_SERDES6G_OB_CFG_SEL_RCTRL BIT(9) +#define HSIO_ANA_SERDES6G_OB_CFG_R_COR BIT(10) +#define HSIO_ANA_SERDES6G_OB_CFG_POST1(x) ((x) << 11) +#define HSIO_ANA_SERDES6G_OB_CFG_R_ADJ_PDR BIT(16) +#define HSIO_ANA_SERDES6G_OB_CFG_R_ADJ_MUX BIT(17) +#define HSIO_ANA_SERDES6G_OB_CFG_PREC(x) ((x) << 18) +#define HSIO_ANA_SERDES6G_OB_CFG_POST0(x) ((x) << 23) +#define HSIO_ANA_SERDES6G_OB_CFG_POL BIT(29) +#define HSIO_ANA_SERDES6G_OB_CFG_ENA1V_MODE(x) ((x) << 30) +#define HSIO_ANA_SERDES6G_OB_CFG_IDLE BIT(31) +#define HSIO_ANA_SERDES6G_OB_CFG1 0x13c +#define HSIO_ANA_SERDES6G_OB_CFG1_LEV(x) (x) +#define HSIO_ANA_SERDES6G_OB_CFG1_ENA_CAS(x) ((x) << 6) +#define HSIO_ANA_SERDES6G_SER_CFG 0x140 +#define HSIO_ANA_SERDES6G_COMMON_CFG 0x144 +#define HSIO_ANA_SERDES6G_COMMON_CFG_IF_MODE(x) (x) +#define HSIO_ANA_SERDES6G_COMMON_CFG_QRATE(x) (x << 2) +#define HSIO_ANA_SERDES6G_COMMON_CFG_ENA_LANE BIT(14) +#define HSIO_ANA_SERDES6G_COMMON_CFG_SYS_RST BIT(16) +#define HSIO_ANA_SERDES6G_PLL_CFG 0x148 +#define HSIO_ANA_SERDES6G_PLL_CFG_ROT_FRQ BIT(0) +#define HSIO_ANA_SERDES6G_PLL_CFG_ROT_DIR BIT(1) +#define HSIO_ANA_SERDES6G_PLL_CFG_RB_DATA_SEL BIT(2) +#define HSIO_ANA_SERDES6G_PLL_CFG_FSM_OOR_RECAL_ENA BIT(3) +#define HSIO_ANA_SERDES6G_PLL_CFG_FSM_FORCE_SET_ENA BIT(4) +#define HSIO_ANA_SERDES6G_PLL_CFG_FSM_ENA BIT(5) +#define HSIO_ANA_SERDES6G_PLL_CFG_FSM_CTRL_DATA(x) ((x) << 6) +#define HSIO_ANA_SERDES6G_PLL_CFG_ENA_ROT BIT(14) +#define HSIO_ANA_SERDES6G_PLL_CFG_DIV4 BIT(15) +#define HSIO_ANA_SERDES6G_PLL_CFG_ENA_OFFS(x) ((x) << 16) +#define HSIO_DIG_SERDES6G_MISC_CFG 0x108 +#define HSIO_DIG_SERDES6G_MISC_CFG_LANE_RST BIT(0) +#define HSIO_MCB_SERDES6G_CFG 0x168 +#define HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT BIT(31) +#define HSIO_MCB_SERDES6G_CFG_ADDR(x) (x) +#define HSIO_HW_CFGSTAT_HW_CFG 0x16c + +#define LRN_COMMON_ACCESS_CTRL 0x0 +#define LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT BIT(0) +#define LRN_COMMON_MAC_ACCESS_CFG0 0x4 +#define LRN_COMMON_MAC_ACCESS_CFG1 0x8 +#define LRN_COMMON_MAC_ACCESS_CFG2 0xc +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_ADDR(x) (x) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_TYPE(x) ((x) << 12) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_VLD BIT(15) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_LOCKED BIT(16) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_COPY BIT(23) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_QU(x) ((x) << 24) + +#define QFWD_SYSTEM_SWITCH_PORT_MODE(x) (0x4 * (x)) +#define QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA BIT(17) + +#define QS_XTR_GRP_CFG(x) (0x0 + 4 * (x)) +#define QS_INJ_GRP_CFG(x) (0x24 + (x) * 4) + +#define QSYS_SYSTEM_RESET_CFG 0xf0 +#define QSYS_CALCFG_CAL_AUTO(x) (0x3d4 + 4 * (x)) +#define QSYS_CALCFG_CAL_CTRL 0x3e8 +#define QSYS_CALCFG_CAL_CTRL_CAL_MODE(x) ((x) << 11) +#define QSYS_RAM_CTRL_RAM_INIT 0x3ec + +#define REW_RAM_CTRL_RAM_INIT 0x53528 + +#define VOP_RAM_CTRL_RAM_INIT 0x43638 + +#define XTR_VALID_BYTES(x) (4 - ((x) & 3)) +#define MAC_VID 0 +#define CPU_PORT 53 +#define IFH_LEN 7 +#define JR2_BUF_CELL_SZ 60 +#define ETH_ALEN 6 +#define PGID_BROADCAST 510 +#define PGID_UNICAST 511 + +static const char * const regs_names[] = { + "port0", "port1", "port2", "port3", "port4", "port5", "port6", "port7", + "port8", "port9", "port10", "port11", "port12", "port13", "port14", + "port15", "port16", "port17", "port18", "port19", "port20", "port21", + "port22", "port23", "port24", "port25", "port26", "port27", "port28", + "port29", "port30", "port31", "port32", "port33", "port34", "port35", + "port36", "port37", "port38", "port39", "port40", "port41", "port42", + "port43", "port44", "port45", "port46", "port47", + "ana_ac", "ana_cl", "ana_l2", "asm", "hsio", "lrn", + "qfwd", "qs", "qsys", "rew", +}; + +#define REGS_NAMES_COUNT ARRAY_SIZE(regs_names) + 1 +#define MAX_PORT 48 + +enum jr2_ctrl_regs { + ANA_AC = MAX_PORT, + ANA_CL, + ANA_L2, + ASM, + HSIO, + LRN, + QFWD, + QS, + QSYS, + REW, +}; + +#define JR2_MIIM_BUS_COUNT 3 + +struct jr2_phy_port_t { + size_t phy_addr; + struct mii_dev *bus; + u8 serdes_index; + u8 phy_mode; +}; + +struct jr2_private { + void __iomem *regs[REGS_NAMES_COUNT]; + struct mii_dev *bus[JR2_MIIM_BUS_COUNT]; + struct jr2_phy_port_t ports[MAX_PORT]; +}; + +struct jr2_miim_dev { + void __iomem *regs; + phys_addr_t miim_base; + unsigned long miim_size; + struct mii_dev *bus; +}; + +static const unsigned long jr2_regs_qs[] = { + [MSCC_QS_XTR_RD] = 0x8, + [MSCC_QS_XTR_FLUSH] = 0x18, + [MSCC_QS_XTR_DATA_PRESENT] = 0x1c, + [MSCC_QS_INJ_WR] = 0x2c, + [MSCC_QS_INJ_CTRL] = 0x34, +}; + +static struct jr2_miim_dev miim[JR2_MIIM_BUS_COUNT]; +static int miim_count = -1; + +static int mscc_miim_wait_ready(struct jr2_miim_dev *miim) +{ + unsigned long deadline; + u32 val; + + deadline = timer_get_us() + 250000; + + do { + val = readl(miim->regs + GCB_MIIM_MII_STATUS); + } while (timer_get_us() <= deadline && (val & GCB_MIIM_STAT_BUSY)); + + if (val & GCB_MIIM_STAT_BUSY) + return -ETIMEDOUT; + + return 0; +} + +static int mscc_miim_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct jr2_miim_dev *miim = (struct jr2_miim_dev *)bus->priv; + u32 val; + int ret; + + ret = mscc_miim_wait_ready(miim); + if (ret) + goto out; + + writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) | + GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_OPR_READ, + miim->regs + GCB_MIIM_MII_CMD); + + ret = mscc_miim_wait_ready(miim); + if (ret) + goto out; + + val = readl(miim->regs + GCB_MIIM_DATA); + if (val & GCB_MIIM_DATA_ERROR) { + ret = -EIO; + goto out; + } + + ret = val & 0xFFFF; + out: + return ret; +} + +static int mscc_miim_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val) +{ + struct jr2_miim_dev *miim = (struct jr2_miim_dev *)bus->priv; + int ret; + + ret = mscc_miim_wait_ready(miim); + if (ret < 0) + goto out; + + writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) | + GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_WRDATA(val) | + GCB_MIIM_MII_CMD_OPR_WRITE, miim->regs + GCB_MIIM_MII_CMD); + + out: + return ret; +} + +static struct mii_dev *jr2_mdiobus_init(phys_addr_t miim_base, + unsigned long miim_size) +{ + struct mii_dev *bus; + + bus = mdio_alloc(); + if (!bus) + return NULL; + + ++miim_count; + sprintf(bus->name, "miim-bus%d", miim_count); + + miim[miim_count].regs = ioremap(miim_base, miim_size); + miim[miim_count].miim_base = miim_base; + miim[miim_count].miim_size = miim_size; + bus->priv = &miim[miim_count]; + bus->read = mscc_miim_read; + bus->write = mscc_miim_write; + + if (mdio_register(bus)) + return NULL; + + miim[miim_count].bus = bus; + return bus; +} + +static void jr2_cpu_capture_setup(struct jr2_private *priv) +{ + /* ASM: No preamble and IFH prefix on CPU injected frames */ + writel(ASM_CFG_PORT_NO_PREAMBLE_ENA | + ASM_CFG_PORT_INJ_FORMAT_CFG(1), + priv->regs[ASM] + ASM_CFG_PORT(CPU_PORT)); + + /* Set Manual injection via DEVCPU_QS registers for CPU queue 0 */ + writel(0x5, priv->regs[QS] + QS_INJ_GRP_CFG(0)); + + /* Set Manual extraction via DEVCPU_QS registers for CPU queue 0 */ + writel(0x7, priv->regs[QS] + QS_XTR_GRP_CFG(0)); + + /* Enable CPU port for any frame transfer */ + setbits_le32(priv->regs[QFWD] + QFWD_SYSTEM_SWITCH_PORT_MODE(CPU_PORT), + QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA); + + /* Send a copy to CPU when found as forwarding entry */ + setbits_le32(priv->regs[ANA_L2] + ANA_L2_COMMON_FWD_CFG, + ANA_L2_COMMON_FWD_CFG_CPU_DMAC_COPY_ENA); +} + +static void jr2_port_init(struct jr2_private *priv, int port) +{ + void __iomem *regs = priv->regs[port]; + + /* Enable PCS */ + writel(DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA, + regs + DEV_PCS1G_CFG_PCS1G_CFG); + + /* Disable Signal Detect */ + writel(0, regs + DEV_PCS1G_CFG_PCS1G_SD); + + /* Enable MAC RX and TX */ + writel(DEV_MAC_CFG_MAC_ENA_RX_ENA | + DEV_MAC_CFG_MAC_ENA_TX_ENA, + regs + DEV_MAC_CFG_MAC_ENA); + + /* Clear sgmii_mode_ena */ + writel(0, regs + DEV_PCS1G_CFG_PCS1G_MODE); + + /* + * Clear sw_resolve_ena(bit 0) and set adv_ability to + * something meaningful just in case + */ + writel(DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(0x20), + regs + DEV_PCS1G_CFG_PCS1G_ANEG); + + /* Set MAC IFG Gaps */ + writel(DEV_MAC_CFG_MAC_IFG_TX_IFG(4) | + DEV_MAC_CFG_MAC_IFG_RX_IFG1(5) | + DEV_MAC_CFG_MAC_IFG_RX_IFG2(1), + regs + DEV_MAC_CFG_MAC_IFG); + + /* Set link speed and release all resets */ + writel(DEV_DEV_CFG_DEV_RST_CTRL_SPEED_SEL(2), + regs + DEV_DEV_CFG_DEV_RST_CTRL); + + /* Make VLAN aware for CPU traffic */ + writel(ANA_CL_PORT_VLAN_CFG_AWARE_ENA | + ANA_CL_PORT_VLAN_CFG_POP_CNT(1) | + MAC_VID, + priv->regs[ANA_CL] + ANA_CL_PORT_VLAN_CFG(port)); + + /* Enable CPU port for any frame transfer */ + setbits_le32(priv->regs[QFWD] + QFWD_SYSTEM_SWITCH_PORT_MODE(port), + QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA); +} + +static void serdes6g_write(void __iomem *base, u32 addr) +{ + u32 data; + + writel(HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT | + HSIO_MCB_SERDES6G_CFG_ADDR(addr), + base + HSIO_MCB_SERDES6G_CFG); + + do { + data = readl(base + HSIO_MCB_SERDES6G_CFG); + } while (data & HSIO_MCB_SERDES6G_CFG_WR_ONE_SHOT); +} + +static void serdes6g_setup(void __iomem *base, uint32_t addr, + phy_interface_t interface) +{ + u32 ib_if_mode = 0; + u32 ib_qrate = 0; + u32 ib_cal_ena = 0; + u32 ib1_tsdet = 0; + u32 ob_lev = 0; + u32 ob_ena_cas = 0; + u32 ob_ena1v_mode = 0; + u32 des_bw_ana = 0; + u32 pll_fsm_ctrl_data = 0; + + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + ib_if_mode = 1; + ib_qrate = 1; + ib_cal_ena = 1; + ib1_tsdet = 3; + ob_lev = 48; + ob_ena_cas = 2; + ob_ena1v_mode = 1; + des_bw_ana = 3; + pll_fsm_ctrl_data = 60; + break; + case PHY_INTERFACE_MODE_QSGMII: + ib_if_mode = 3; + ib1_tsdet = 16; + ob_lev = 24; + des_bw_ana = 5; + pll_fsm_ctrl_data = 120; + break; + default: + pr_err("Interface not supported\n"); + return; + } + + if (interface == PHY_INTERFACE_MODE_QSGMII) + writel(0xfff, base + HSIO_HW_CFGSTAT_HW_CFG); + + writel(HSIO_ANA_SERDES6G_COMMON_CFG_IF_MODE(3), + base + HSIO_ANA_SERDES6G_COMMON_CFG); + writel(HSIO_ANA_SERDES6G_PLL_CFG_FSM_CTRL_DATA(120) | + HSIO_ANA_SERDES6G_PLL_CFG_ENA_OFFS(3), + base + HSIO_ANA_SERDES6G_PLL_CFG); + writel(HSIO_ANA_SERDES6G_IB_CFG_REG_ENA | + HSIO_ANA_SERDES6G_IB_CFG_EQZ_ENA | + HSIO_ANA_SERDES6G_IB_CFG_SAM_ENA | + HSIO_ANA_SERDES6G_IB_CFG_CONCUR | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_ENA | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_OFF(0) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_LP(2) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_MID(1) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_HP(1) | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_CLK_SEL(7) | + HSIO_ANA_SERDES6G_IB_CFG_TERM_MODE_SEL(1) | + HSIO_ANA_SERDES6G_IB_CFG_ICML_ADJ(5) | + HSIO_ANA_SERDES6G_IB_CFG_RTRM_ADJ(13) | + HSIO_ANA_SERDES6G_IB_CFG_VBULK_SEL | + HSIO_ANA_SERDES6G_IB_CFG_SOFSI(1), + base + HSIO_ANA_SERDES6G_IB_CFG); + writel(HSIO_ANA_SERDES6G_IB_CFG1_FILT_OFFSET | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_LP | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_MID | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_HP | + HSIO_ANA_SERDES6G_IB_CFG1_SCALY(15) | + HSIO_ANA_SERDES6G_IB_CFG1_TSDET(3) | + HSIO_ANA_SERDES6G_IB_CFG1_TJTAG(8), + base + HSIO_ANA_SERDES6G_IB_CFG1); + writel(HSIO_DIG_SERDES6G_MISC_CFG_LANE_RST, + base + HSIO_DIG_SERDES6G_MISC_CFG); + + serdes6g_write(base, addr); + + writel(HSIO_ANA_SERDES6G_IB_CFG_REG_ENA | + HSIO_ANA_SERDES6G_IB_CFG_EQZ_ENA | + HSIO_ANA_SERDES6G_IB_CFG_SAM_ENA | + HSIO_ANA_SERDES6G_IB_CFG_CONCUR | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_ENA | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_OFF(0) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_LP(2) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_MID(1) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_HP(1) | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_CLK_SEL(0) | + HSIO_ANA_SERDES6G_IB_CFG_TERM_MODE_SEL(1) | + HSIO_ANA_SERDES6G_IB_CFG_ICML_ADJ(5) | + HSIO_ANA_SERDES6G_IB_CFG_RTRM_ADJ(13) | + HSIO_ANA_SERDES6G_IB_CFG_VBULK_SEL | + HSIO_ANA_SERDES6G_IB_CFG_SOFSI(1), + base + HSIO_ANA_SERDES6G_IB_CFG); + writel(HSIO_ANA_SERDES6G_IB_CFG1_FILT_OFFSET | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_LP | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_MID | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_HP | + HSIO_ANA_SERDES6G_IB_CFG1_SCALY(15) | + HSIO_ANA_SERDES6G_IB_CFG1_TSDET(16) | + HSIO_ANA_SERDES6G_IB_CFG1_TJTAG(8), + base + HSIO_ANA_SERDES6G_IB_CFG1); + + writel(0x0, base + HSIO_ANA_SERDES6G_SER_CFG); + writel(HSIO_ANA_SERDES6G_COMMON_CFG_IF_MODE(ib_if_mode) | + HSIO_ANA_SERDES6G_COMMON_CFG_QRATE(ib_qrate) | + HSIO_ANA_SERDES6G_COMMON_CFG_ENA_LANE | + HSIO_ANA_SERDES6G_COMMON_CFG_SYS_RST, + base + HSIO_ANA_SERDES6G_COMMON_CFG); + writel(HSIO_DIG_SERDES6G_MISC_CFG_LANE_RST, + base + HSIO_DIG_SERDES6G_MISC_CFG); + + writel(HSIO_ANA_SERDES6G_OB_CFG_RESISTOR_CTRL(1) | + HSIO_ANA_SERDES6G_OB_CFG_SR(7) | + HSIO_ANA_SERDES6G_OB_CFG_SR_H | + HSIO_ANA_SERDES6G_OB_CFG_ENA1V_MODE(ob_ena1v_mode) | + HSIO_ANA_SERDES6G_OB_CFG_POL, base + HSIO_ANA_SERDES6G_OB_CFG); + writel(HSIO_ANA_SERDES6G_OB_CFG1_LEV(ob_lev) | + HSIO_ANA_SERDES6G_OB_CFG1_ENA_CAS(ob_ena_cas), + base + HSIO_ANA_SERDES6G_OB_CFG1); + + writel(HSIO_ANA_SERDES6G_DES_CFG_BW_ANA(des_bw_ana) | + HSIO_ANA_SERDES6G_DES_CFG_BW_HYST(5) | + HSIO_ANA_SERDES6G_DES_CFG_MBTR_CTRL(2) | + HSIO_ANA_SERDES6G_DES_CFG_PHS_CTRL(6), + base + HSIO_ANA_SERDES6G_DES_CFG); + writel(HSIO_ANA_SERDES6G_PLL_CFG_FSM_CTRL_DATA(pll_fsm_ctrl_data) | + HSIO_ANA_SERDES6G_PLL_CFG_ENA_OFFS(3), + base + HSIO_ANA_SERDES6G_PLL_CFG); + + serdes6g_write(base, addr); + + /* set pll_fsm_ena = 1 */ + writel(HSIO_ANA_SERDES6G_PLL_CFG_FSM_ENA | + HSIO_ANA_SERDES6G_PLL_CFG_FSM_CTRL_DATA(pll_fsm_ctrl_data) | + HSIO_ANA_SERDES6G_PLL_CFG_ENA_OFFS(3), + base + HSIO_ANA_SERDES6G_PLL_CFG); + + serdes6g_write(base, addr); + + /* wait 20ms for pll bringup */ + mdelay(20); + + /* start IB calibration by setting ib_cal_ena and clearing lane_rst */ + writel(HSIO_ANA_SERDES6G_IB_CFG_REG_ENA | + HSIO_ANA_SERDES6G_IB_CFG_EQZ_ENA | + HSIO_ANA_SERDES6G_IB_CFG_SAM_ENA | + HSIO_ANA_SERDES6G_IB_CFG_CAL_ENA(ib_cal_ena) | + HSIO_ANA_SERDES6G_IB_CFG_CONCUR | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_ENA | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_OFF(0) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_LP(2) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_MID(1) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_HP(1) | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_CLK_SEL(0) | + HSIO_ANA_SERDES6G_IB_CFG_TERM_MODE_SEL(1) | + HSIO_ANA_SERDES6G_IB_CFG_ICML_ADJ(5) | + HSIO_ANA_SERDES6G_IB_CFG_RTRM_ADJ(13) | + HSIO_ANA_SERDES6G_IB_CFG_VBULK_SEL | + HSIO_ANA_SERDES6G_IB_CFG_SOFSI(1), + base + HSIO_ANA_SERDES6G_IB_CFG); + writel(0x0, base + HSIO_DIG_SERDES6G_MISC_CFG); + + serdes6g_write(base, addr); + + /* wait 60 for calibration */ + mdelay(60); + + /* set ib_tsdet and ib_reg_pat_sel_offset back to correct values */ + writel(HSIO_ANA_SERDES6G_IB_CFG_REG_ENA | + HSIO_ANA_SERDES6G_IB_CFG_EQZ_ENA | + HSIO_ANA_SERDES6G_IB_CFG_SAM_ENA | + HSIO_ANA_SERDES6G_IB_CFG_CAL_ENA(ib_cal_ena) | + HSIO_ANA_SERDES6G_IB_CFG_CONCUR | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_ENA | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_OFF(0) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_LP(2) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_MID(1) | + HSIO_ANA_SERDES6G_IB_CFG_REG_PAT_SEL_HP(1) | + HSIO_ANA_SERDES6G_IB_CFG_SIG_DET_CLK_SEL(7) | + HSIO_ANA_SERDES6G_IB_CFG_TERM_MODE_SEL(1) | + HSIO_ANA_SERDES6G_IB_CFG_ICML_ADJ(5) | + HSIO_ANA_SERDES6G_IB_CFG_RTRM_ADJ(13) | + HSIO_ANA_SERDES6G_IB_CFG_VBULK_SEL | + HSIO_ANA_SERDES6G_IB_CFG_SOFSI(1), + base + HSIO_ANA_SERDES6G_IB_CFG); + writel(HSIO_ANA_SERDES6G_IB_CFG1_FILT_OFFSET | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_LP | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_MID | + HSIO_ANA_SERDES6G_IB_CFG1_FILT_HP | + HSIO_ANA_SERDES6G_IB_CFG1_SCALY(15) | + HSIO_ANA_SERDES6G_IB_CFG1_TSDET(ib1_tsdet) | + HSIO_ANA_SERDES6G_IB_CFG1_TJTAG(8), + base + HSIO_ANA_SERDES6G_IB_CFG1); + + serdes6g_write(base, addr); +} + +static void serdes1g_write(void __iomem *base, u32 addr) +{ + u32 data; + + writel(HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT | + HSIO_MCB_SERDES1G_CFG_ADDR(addr), + base + HSIO_MCB_SERDES1G_CFG); + + do { + data = readl(base + HSIO_MCB_SERDES1G_CFG); + } while (data & HSIO_MCB_SERDES1G_CFG_WR_ONE_SHOT); +} + +static void serdes1g_setup(void __iomem *base, uint32_t addr, + phy_interface_t interface) +{ + writel(0x0, base + HSIO_ANA_SERDES1G_SER_CFG); + writel(0x0, base + HSIO_DIG_SERDES1G_TP_CFG); + writel(0x0, base + HSIO_DIG_SERDES1G_DFT_CFG0); + writel(HSIO_ANA_SERDES1G_OB_CFG_RESISTOR_CTRL(1) | + HSIO_ANA_SERDES1G_OB_CFG_VCM_CTRL(4) | + HSIO_ANA_SERDES1G_OB_CFG_CMM_BIAS_CTRL(2) | + HSIO_ANA_SERDES1G_OB_CFG_AMP_CTRL(12) | + HSIO_ANA_SERDES1G_OB_CFG_SLP(3), + base + HSIO_ANA_SERDES1G_OB_CFG); + writel(HSIO_ANA_SERDES1G_IB_CFG_RESISTOR_CTRL(13) | + HSIO_ANA_SERDES1G_IB_CFG_EQ_GAIN(2) | + HSIO_ANA_SERDES1G_IB_CFG_ENA_OFFSET_COMP | + HSIO_ANA_SERDES1G_IB_CFG_ENA_DETLEV | + HSIO_ANA_SERDES1G_IB_CFG_ENA_CMV_TERM | + HSIO_ANA_SERDES1G_IB_CFG_DET_LEV(3) | + HSIO_ANA_SERDES1G_IB_CFG_ACJTAG_HYST(1), + base + HSIO_ANA_SERDES1G_IB_CFG); + writel(HSIO_ANA_SERDES1G_DES_CFG_BW_HYST(7) | + HSIO_ANA_SERDES1G_DES_CFG_BW_ANA(6) | + HSIO_ANA_SERDES1G_DES_CFG_MBTR_CTRL(2) | + HSIO_ANA_SERDES1G_DES_CFG_PHS_CTRL(6), + base + HSIO_ANA_SERDES1G_DES_CFG); + writel(HSIO_DIG_SERDES1G_MISC_CFG_LANE_RST, + base + HSIO_DIG_SERDES1G_MISC_CFG); + writel(HSIO_ANA_SERDES1G_PLL_CFG_FSM_ENA | + HSIO_ANA_SERDES1G_PLL_CFG_FSM_CTRL_DATA(0xc8) | + HSIO_ANA_SERDES1G_PLL_CFG_ENA_RC_DIV2, + base + HSIO_ANA_SERDES1G_PLL_CFG); + writel(HSIO_ANA_SERDES1G_COMMON_CFG_IF_MODE | + HSIO_ANA_SERDES1G_COMMON_CFG_ENA_LANE | + HSIO_ANA_SERDES1G_COMMON_CFG_SYS_RST, + base + HSIO_ANA_SERDES1G_COMMON_CFG); + + serdes1g_write(base, addr); + + setbits_le32(base + HSIO_ANA_SERDES1G_COMMON_CFG, + HSIO_ANA_SERDES1G_COMMON_CFG_SYS_RST); + + serdes1g_write(base, addr); + + clrbits_le32(base + HSIO_DIG_SERDES1G_MISC_CFG, + HSIO_DIG_SERDES1G_MISC_CFG_LANE_RST); + + serdes1g_write(base, addr); +} + +static int ram_init(u32 val, void __iomem *addr) +{ + writel(val, addr); + + if (wait_for_bit_le32(addr, BIT(1), false, 2000, false)) { + printf("Timeout in memory reset, reg = 0x%08x\n", val); + return 1; + } + + return 0; +} + +static int jr2_switch_init(struct jr2_private *priv) +{ + /* Initialize memories */ + ram_init(0x3, priv->regs[QSYS] + QSYS_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[ASM] + ASM_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[ANA_AC] + ANA_AC_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[REW] + REW_RAM_CTRL_RAM_INIT); + + /* Reset counters */ + writel(0x1, priv->regs[ANA_AC] + ANA_AC_STAT_GLOBAL_CFG_PORT_RESET); + writel(0x1, priv->regs[ASM] + ASM_CFG_STAT_CFG); + + /* Enable switch-core and queue system */ + writel(0x1, priv->regs[QSYS] + QSYS_SYSTEM_RESET_CFG); + + return 0; +} + +static void jr2_switch_config(struct jr2_private *priv) +{ + writel(0x55555555, priv->regs[QSYS] + QSYS_CALCFG_CAL_AUTO(0)); + writel(0x55555555, priv->regs[QSYS] + QSYS_CALCFG_CAL_AUTO(1)); + writel(0x55555555, priv->regs[QSYS] + QSYS_CALCFG_CAL_AUTO(2)); + writel(0x55555555, priv->regs[QSYS] + QSYS_CALCFG_CAL_AUTO(3)); + + writel(readl(priv->regs[QSYS] + QSYS_CALCFG_CAL_CTRL) | + QSYS_CALCFG_CAL_CTRL_CAL_MODE(8), + priv->regs[QSYS] + QSYS_CALCFG_CAL_CTRL); +} + +static int jr2_initialize(struct jr2_private *priv) +{ + int ret, i; + + /* Initialize switch memories, enable core */ + ret = jr2_switch_init(priv); + if (ret) + return ret; + + jr2_switch_config(priv); + + for (i = 0; i < MAX_PORT; i++) + jr2_port_init(priv, i); + + jr2_cpu_capture_setup(priv); + + return 0; +} + +static inline int jr2_vlant_wait_for_completion(struct jr2_private *priv) +{ + if (wait_for_bit_le32(priv->regs[LRN] + LRN_COMMON_ACCESS_CTRL, + LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT, + false, 2000, false)) + return -ETIMEDOUT; + + return 0; +} + +static int jr2_mac_table_add(struct jr2_private *priv, + const unsigned char mac[ETH_ALEN], int pgid) +{ + u32 macl = 0, mach = 0; + + /* + * Set the MAC address to handle and the vlan associated in a format + * understood by the hardware. + */ + mach |= MAC_VID << 16; + mach |= ((u32)mac[0]) << 8; + mach |= ((u32)mac[1]) << 0; + macl |= ((u32)mac[2]) << 24; + macl |= ((u32)mac[3]) << 16; + macl |= ((u32)mac[4]) << 8; + macl |= ((u32)mac[5]) << 0; + + writel(mach, priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG0); + writel(macl, priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG1); + + writel(LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_ADDR(pgid) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_TYPE(0x3) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_COPY | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_QU(0) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_VLD | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_LOCKED, + priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG2); + + writel(LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT, + priv->regs[LRN] + LRN_COMMON_ACCESS_CTRL); + + return jr2_vlant_wait_for_completion(priv); +} + +static int jr2_write_hwaddr(struct udevice *dev) +{ + struct jr2_private *priv = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + + return jr2_mac_table_add(priv, pdata->enetaddr, PGID_UNICAST); +} + +static void serdes_setup(struct jr2_private *priv) +{ + size_t mask; + int i = 0; + + for (i = 0; i < MAX_PORT; ++i) { + if (!priv->ports[i].bus || priv->ports[i].serdes_index == 0xff) + continue; + + mask = BIT(priv->ports[i].serdes_index); + if (priv->ports[i].serdes_index < SERDES1G_MAX) { + serdes1g_setup(priv->regs[HSIO], mask, + priv->ports[i].phy_mode); + } else { + mask >>= SERDES6G(0); + serdes6g_setup(priv->regs[HSIO], mask, + priv->ports[i].phy_mode); + } + } +} + +static int jr2_start(struct udevice *dev) +{ + struct jr2_private *priv = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + const unsigned char mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, + 0xff }; + int ret; + + ret = jr2_initialize(priv); + if (ret) + return ret; + + /* Set MAC address tables entries for CPU redirection */ + ret = jr2_mac_table_add(priv, mac, PGID_BROADCAST); + if (ret) + return ret; + + ret = jr2_mac_table_add(priv, pdata->enetaddr, PGID_UNICAST); + if (ret) + return ret; + + serdes_setup(priv); + + return 0; +} + +static void jr2_stop(struct udevice *dev) +{ +} + +static int jr2_send(struct udevice *dev, void *packet, int length) +{ + struct jr2_private *priv = dev_get_priv(dev); + u32 ifh[IFH_LEN]; + u32 *buf = packet; + + memset(ifh, '\0', IFH_LEN); + + /* Set DST PORT_MASK */ + ifh[0] = htonl(0); + ifh[1] = htonl(0x1FFFFF); + ifh[2] = htonl(~0); + /* Set DST_MODE to INJECT and UPDATE_FCS */ + ifh[5] = htonl(0x4c0); + + return mscc_send(priv->regs[QS], jr2_regs_qs, + ifh, IFH_LEN, buf, length); +} + +static int jr2_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct jr2_private *priv = dev_get_priv(dev); + u32 *rxbuf = (u32 *)net_rx_packets[0]; + int byte_cnt = 0; + + byte_cnt = mscc_recv(priv->regs[QS], jr2_regs_qs, rxbuf, IFH_LEN, + false); + + *packetp = net_rx_packets[0]; + + return byte_cnt; +} + +static struct mii_dev *get_mdiobus(phys_addr_t base, unsigned long size) +{ + int i = 0; + + for (i = 0; i < JR2_MIIM_BUS_COUNT; ++i) + if (miim[i].miim_base == base && miim[i].miim_size == size) + return miim[i].bus; + + return NULL; +} + +static void add_port_entry(struct jr2_private *priv, size_t index, + size_t phy_addr, struct mii_dev *bus, + u8 serdes_index, u8 phy_mode) +{ + priv->ports[index].phy_addr = phy_addr; + priv->ports[index].bus = bus; + priv->ports[index].serdes_index = serdes_index; + priv->ports[index].phy_mode = phy_mode; +} + +static int jr2_probe(struct udevice *dev) +{ + struct jr2_private *priv = dev_get_priv(dev); + int i; + int ret; + struct resource res; + fdt32_t faddr; + phys_addr_t addr_base; + unsigned long addr_size; + ofnode eth_node, node, mdio_node; + size_t phy_addr; + struct mii_dev *bus; + struct ofnode_phandle_args phandle; + struct phy_device *phy; + + if (!priv) + return -EINVAL; + + /* Get registers and map them to the private structure */ + for (i = 0; i < ARRAY_SIZE(regs_names); i++) { + priv->regs[i] = dev_remap_addr_name(dev, regs_names[i]); + if (!priv->regs[i]) { + debug + ("Error can't get regs base addresses for %s\n", + regs_names[i]); + return -ENOMEM; + } + } + + /* Initialize miim buses */ + memset(&miim, 0x0, sizeof(struct jr2_miim_dev) * JR2_MIIM_BUS_COUNT); + + /* iterate all the ports and find out on which bus they are */ + i = 0; + eth_node = dev_read_first_subnode(dev); + for (node = ofnode_first_subnode(eth_node); + ofnode_valid(node); + node = ofnode_next_subnode(node)) { + if (ofnode_read_resource(node, 0, &res)) + return -ENOMEM; + i = res.start; + + ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, + 0, 0, &phandle); + if (ret) + continue; + + /* Get phy address on mdio bus */ + if (ofnode_read_resource(phandle.node, 0, &res)) + return -ENOMEM; + phy_addr = res.start; + + /* Get mdio node */ + mdio_node = ofnode_get_parent(phandle.node); + + if (ofnode_read_resource(mdio_node, 0, &res)) + return -ENOMEM; + faddr = cpu_to_fdt32(res.start); + + addr_base = ofnode_translate_address(mdio_node, &faddr); + addr_size = res.end - res.start; + + /* If the bus is new then create a new bus */ + if (!get_mdiobus(addr_base, addr_size)) + priv->bus[miim_count] = + jr2_mdiobus_init(addr_base, addr_size); + + /* Connect mdio bus with the port */ + bus = get_mdiobus(addr_base, addr_size); + + /* Get serdes info */ + ret = ofnode_parse_phandle_with_args(node, "phys", NULL, + 3, 0, &phandle); + if (ret) + return -ENOMEM; + + add_port_entry(priv, i, phy_addr, bus, phandle.args[1], + phandle.args[2]); + } + + for (i = 0; i < MAX_PORT; i++) { + if (!priv->ports[i].bus) + continue; + + phy = phy_connect(priv->ports[i].bus, + priv->ports[i].phy_addr, dev, + PHY_INTERFACE_MODE_NONE); + if (phy) + board_phy_config(phy); + } + + return 0; +} + +static int jr2_remove(struct udevice *dev) +{ + struct jr2_private *priv = dev_get_priv(dev); + int i; + + for (i = 0; i < JR2_MIIM_BUS_COUNT; i++) { + mdio_unregister(priv->bus[i]); + mdio_free(priv->bus[i]); + } + + return 0; +} + +static const struct eth_ops jr2_ops = { + .start = jr2_start, + .stop = jr2_stop, + .send = jr2_send, + .recv = jr2_recv, + .write_hwaddr = jr2_write_hwaddr, +}; + +static const struct udevice_id mscc_jr2_ids[] = { + {.compatible = "mscc,vsc7454-switch" }, + { /* Sentinel */ } +}; + +U_BOOT_DRIVER(jr2) = { + .name = "jr2-switch", + .id = UCLASS_ETH, + .of_match = mscc_jr2_ids, + .probe = jr2_probe, + .remove = jr2_remove, + .ops = &jr2_ops, + .priv_auto_alloc_size = sizeof(struct jr2_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; diff --git a/drivers/net/mscc_eswitch/ocelot_switch.c b/drivers/net/mscc_eswitch/ocelot_switch.c index bf08c35ba0..815c2da264 100644 --- a/drivers/net/mscc_eswitch/ocelot_switch.c +++ b/drivers/net/mscc_eswitch/ocelot_switch.c @@ -142,18 +142,16 @@ static const unsigned long ocelot_regs_ana_table[] = { static struct mscc_miim_dev miim[NUM_PHY]; -static int mscc_miim_reset(struct mii_dev *bus) +static void mscc_phy_reset(void) { - struct mscc_miim_dev *miim = (struct mscc_miim_dev *)bus->priv; - - if (miim->phy_regs) { - writel(0, miim->phy_regs + PHY_CFG); - writel(PHY_CFG_RST | PHY_CFG_COMMON_RST - | PHY_CFG_ENA, miim->phy_regs + PHY_CFG); - mdelay(500); + writel(0, miim[INTERNAL].phy_regs + PHY_CFG); + writel(PHY_CFG_RST | PHY_CFG_COMMON_RST + | PHY_CFG_ENA, miim[INTERNAL].phy_regs + PHY_CFG); + if (wait_for_bit_le32(miim[INTERNAL].phy_regs + PHY_STAT, + PHY_STAT_SUPERVISOR_COMPLETE, + true, 2000, false)) { + pr_err("Timeout in phy reset\n"); } - - return 0; } /* For now only setup the internal mdio bus */ @@ -194,7 +192,6 @@ static struct mii_dev *ocelot_mdiobus_init(struct udevice *dev) miim[INTERNAL].phy_regs = ioremap(phy_base[PHY], phy_size[PHY]); miim[INTERNAL].regs = ioremap(phy_base[MIIM], phy_size[MIIM]); bus->priv = &miim[INTERNAL]; - bus->reset = mscc_miim_reset; bus->read = mscc_miim_read; bus->write = mscc_miim_write; @@ -210,13 +207,8 @@ __weak void mscc_switch_reset(void) static void ocelot_stop(struct udevice *dev) { - struct ocelot_private *priv = dev_get_priv(dev); - int i; - mscc_switch_reset(); - for (i = 0; i < NUM_PHY; i++) - if (priv->bus[i]) - mscc_miim_reset(priv->bus[i]); + mscc_phy_reset(); } static void ocelot_cpu_capture_setup(struct ocelot_private *priv) @@ -473,6 +465,7 @@ static int ocelot_probe(struct udevice *dev) } priv->bus[INTERNAL] = ocelot_mdiobus_init(dev); + mscc_phy_reset(); for (i = 0; i < 4; i++) { phy_connect(priv->bus[INTERNAL], i, dev, diff --git a/drivers/net/mscc_eswitch/servalt_switch.c b/drivers/net/mscc_eswitch/servalt_switch.c new file mode 100644 index 0000000000..995c62309d --- /dev/null +++ b/drivers/net/mscc_eswitch/servalt_switch.c @@ -0,0 +1,622 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Microsemi Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mscc_xfer.h" + +#define GCB_MIIM_MII_STATUS 0x0 +#define GCB_MIIM_STAT_BUSY BIT(3) +#define GCB_MIIM_MII_CMD 0x8 +#define GCB_MIIM_MII_CMD_OPR_WRITE BIT(1) +#define GCB_MIIM_MII_CMD_OPR_READ BIT(2) +#define GCB_MIIM_MII_CMD_WRDATA(x) ((x) << 4) +#define GCB_MIIM_MII_CMD_REGAD(x) ((x) << 20) +#define GCB_MIIM_MII_CMD_PHYAD(x) ((x) << 25) +#define GCB_MIIM_MII_CMD_VLD BIT(31) +#define GCB_MIIM_DATA 0xC +#define GCB_MIIM_DATA_ERROR (0x3 << 16) + +#define PHY_CFG 0x0 +#define PHY_CFG_ENA 0x3 +#define PHY_CFG_COMMON_RST BIT(2) +#define PHY_CFG_RST (0x3 << 3) +#define PHY_STAT 0x4 +#define PHY_STAT_SUPERVISOR_COMPLETE BIT(0) + +#define ANA_AC_RAM_CTRL_RAM_INIT 0x14fdc +#define ANA_AC_STAT_GLOBAL_CFG_PORT_RESET 0x15474 + +#define ANA_CL_PORT_VLAN_CFG(x) (0xa018 + 0xc8 * (x)) +#define ANA_CL_PORT_VLAN_CFG_AWARE_ENA BIT(19) +#define ANA_CL_PORT_VLAN_CFG_POP_CNT(x) ((x) << 17) + +#define ANA_L2_COMMON_FWD_CFG 0x18498 +#define ANA_L2_COMMON_FWD_CFG_CPU_DMAC_COPY_ENA BIT(6) + +#define ASM_CFG_STAT_CFG 0xb08 +#define ASM_CFG_PORT(x) (0xb74 + 0x4 * (x)) +#define ASM_CFG_PORT_NO_PREAMBLE_ENA BIT(8) +#define ASM_CFG_PORT_INJ_FORMAT_CFG(x) ((x) << 1) +#define ASM_RAM_CTRL_RAM_INIT 0xbfc + +#define DEV_DEV_CFG_DEV_RST_CTRL 0x0 +#define DEV_DEV_CFG_DEV_RST_CTRL_SPEED_SEL(x) ((x) << 20) +#define DEV_MAC_CFG_MAC_ENA 0x24 +#define DEV_MAC_CFG_MAC_ENA_RX_ENA BIT(4) +#define DEV_MAC_CFG_MAC_ENA_TX_ENA BIT(0) +#define DEV_MAC_CFG_MAC_IFG 0x3c +#define DEV_MAC_CFG_MAC_IFG_TX_IFG(x) ((x) << 8) +#define DEV_MAC_CFG_MAC_IFG_RX_IFG2(x) ((x) << 4) +#define DEV_MAC_CFG_MAC_IFG_RX_IFG1(x) (x) +#define DEV_PCS1G_CFG_PCS1G_CFG 0x48 +#define DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA BIT(0) +#define DEV_PCS1G_CFG_PCS1G_MODE 0x4c +#define DEV_PCS1G_CFG_PCS1G_SD 0x50 +#define DEV_PCS1G_CFG_PCS1G_ANEG 0x54 +#define DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(x) ((x) << 16) + +#define LRN_COMMON_ACCESS_CTRL 0x0 +#define LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT BIT(0) +#define LRN_COMMON_MAC_ACCESS_CFG0 0x4 +#define LRN_COMMON_MAC_ACCESS_CFG1 0x8 +#define LRN_COMMON_MAC_ACCESS_CFG2 0xc +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_ADDR(x) (x) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_TYPE(x) ((x) << 12) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_VLD BIT(15) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_LOCKED BIT(16) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_COPY BIT(23) +#define LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_QU(x) ((x) << 24) + +#define QFWD_SYSTEM_SWITCH_PORT_MODE(x) (0x4400 + 0x4 * (x)) +#define QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA BIT(17) + +#define QS_XTR_GRP_CFG(x) (4 * (x)) +#define QS_INJ_GRP_CFG(x) (0x24 + (x) * 4) + +#define QSYS_SYSTEM_RESET_CFG 0x1048 +#define QSYS_CALCFG_CAL_AUTO 0x1134 +#define QSYS_CALCFG_CAL_CTRL 0x113c +#define QSYS_CALCFG_CAL_CTRL_CAL_MODE(x) ((x) << 11) +#define QSYS_RAM_CTRL_RAM_INIT 0x1140 + +#define REW_RAM_CTRL_RAM_INIT 0xFFF4 + +#define MAC_VID 0 +#define CPU_PORT 11 +#define IFH_LEN 7 +#define ETH_ALEN 6 +#define PGID_BROADCAST 50 +#define PGID_UNICAST 51 + +static const char * const regs_names[] = { + "port0", "port1", + "ana_ac", "ana_cl", "ana_l2", "asm", "lrn", "qfwd", "qs", "qsys", "rew", +}; + +#define REGS_NAMES_COUNT ARRAY_SIZE(regs_names) + 1 +#define MAX_PORT 2 + +enum servalt_ctrl_regs { + ANA_AC = MAX_PORT, + ANA_CL, + ANA_L2, + ASM, + LRN, + QFWD, + QS, + QSYS, + REW, +}; + +#define SERVALT_MIIM_BUS_COUNT 2 + +struct servalt_phy_port_t { + size_t phy_addr; + struct mii_dev *bus; +}; + +struct servalt_private { + void __iomem *regs[REGS_NAMES_COUNT]; + struct mii_dev *bus[SERVALT_MIIM_BUS_COUNT]; + struct servalt_phy_port_t ports[MAX_PORT]; +}; + +struct mscc_miim_dev { + void __iomem *regs; + phys_addr_t miim_base; + unsigned long miim_size; + struct mii_dev *bus; +}; + +static const unsigned long servalt_regs_qs[] = { + [MSCC_QS_XTR_RD] = 0x8, + [MSCC_QS_XTR_FLUSH] = 0x18, + [MSCC_QS_XTR_DATA_PRESENT] = 0x1c, + [MSCC_QS_INJ_WR] = 0x2c, + [MSCC_QS_INJ_CTRL] = 0x34, +}; + +static struct mscc_miim_dev miim[SERVALT_MIIM_BUS_COUNT]; +static int miim_count = -1; + +static int mscc_miim_wait_ready(struct mscc_miim_dev *miim) +{ + return wait_for_bit_le32(miim->regs + GCB_MIIM_MII_STATUS, + GCB_MIIM_STAT_BUSY, false, 250, false); +} + +static int mscc_miim_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct mscc_miim_dev *miim = (struct mscc_miim_dev *)bus->priv; + u32 val; + int ret; + + ret = mscc_miim_wait_ready(miim); + if (ret) + goto out; + + writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) | + GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_OPR_READ, + miim->regs + GCB_MIIM_MII_CMD); + + ret = mscc_miim_wait_ready(miim); + if (ret) + goto out; + + val = readl(miim->regs + GCB_MIIM_DATA); + if (val & GCB_MIIM_DATA_ERROR) { + ret = -EIO; + goto out; + } + + ret = val & 0xFFFF; +out: + return ret; +} + +static int mscc_miim_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val) +{ + struct mscc_miim_dev *miim = (struct mscc_miim_dev *)bus->priv; + int ret; + + ret = mscc_miim_wait_ready(miim); + if (ret < 0) + goto out; + + writel(GCB_MIIM_MII_CMD_VLD | GCB_MIIM_MII_CMD_PHYAD(addr) | + GCB_MIIM_MII_CMD_REGAD(reg) | GCB_MIIM_MII_CMD_WRDATA(val) | + GCB_MIIM_MII_CMD_OPR_WRITE, miim->regs + GCB_MIIM_MII_CMD); + +out: + return ret; +} + +static struct mii_dev *servalt_mdiobus_init(phys_addr_t miim_base, + unsigned long miim_size) +{ + struct mii_dev *bus; + + bus = mdio_alloc(); + if (!bus) + return NULL; + + ++miim_count; + sprintf(bus->name, "miim-bus%d", miim_count); + + miim[miim_count].regs = ioremap(miim_base, miim_size); + miim[miim_count].miim_base = miim_base; + miim[miim_count].miim_size = miim_size; + bus->priv = &miim[miim_count]; + bus->read = mscc_miim_read; + bus->write = mscc_miim_write; + + if (mdio_register(bus)) + return NULL; + + miim[miim_count].bus = bus; + return bus; +} + +static void mscc_phy_reset(void) +{ + writel(0, BASE_DEVCPU_GCB + GCB_PHY_CFG + PHY_CFG); + writel(PHY_CFG_RST | PHY_CFG_COMMON_RST + | PHY_CFG_ENA, BASE_DEVCPU_GCB + GCB_PHY_CFG + PHY_CFG); + if (wait_for_bit_le32((const void *)(BASE_DEVCPU_GCB + GCB_PHY_CFG) + + PHY_STAT, PHY_STAT_SUPERVISOR_COMPLETE, + true, 2000, false)) { + pr_err("Timeout in phy reset\n"); + } +} + +static void servalt_cpu_capture_setup(struct servalt_private *priv) +{ + /* ASM: No preamble and IFH prefix on CPU injected frames */ + writel(ASM_CFG_PORT_NO_PREAMBLE_ENA | + ASM_CFG_PORT_INJ_FORMAT_CFG(1), + priv->regs[ASM] + ASM_CFG_PORT(CPU_PORT)); + + /* Set Manual injection via DEVCPU_QS registers for CPU queue 0 */ + writel(0x5, priv->regs[QS] + QS_INJ_GRP_CFG(0)); + + /* Set Manual extraction via DEVCPU_QS registers for CPU queue 0 */ + writel(0x7, priv->regs[QS] + QS_XTR_GRP_CFG(0)); + + /* Enable CPU port for any frame transfer */ + setbits_le32(priv->regs[QFWD] + QFWD_SYSTEM_SWITCH_PORT_MODE(CPU_PORT), + QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA); + + /* Send a copy to CPU when found as forwarding entry */ + setbits_le32(priv->regs[ANA_L2] + ANA_L2_COMMON_FWD_CFG, + ANA_L2_COMMON_FWD_CFG_CPU_DMAC_COPY_ENA); +} + +static void servalt_port_init(struct servalt_private *priv, int port) +{ + void __iomem *regs = priv->regs[port]; + + /* Enable PCS */ + writel(DEV_PCS1G_CFG_PCS1G_CFG_PCS_ENA, + regs + DEV_PCS1G_CFG_PCS1G_CFG); + + /* Disable Signal Detect */ + writel(0, regs + DEV_PCS1G_CFG_PCS1G_SD); + + /* Enable MAC RX and TX */ + writel(DEV_MAC_CFG_MAC_ENA_RX_ENA | + DEV_MAC_CFG_MAC_ENA_TX_ENA, + regs + DEV_MAC_CFG_MAC_ENA); + + /* Clear sgmii_mode_ena */ + writel(0, regs + DEV_PCS1G_CFG_PCS1G_MODE); + + /* + * Clear sw_resolve_ena(bit 0) and set adv_ability to + * something meaningful just in case + */ + writel(DEV_PCS1G_CFG_PCS1G_ANEG_ADV_ABILITY(0x20), + regs + DEV_PCS1G_CFG_PCS1G_ANEG); + + /* Set MAC IFG Gaps */ + writel(DEV_MAC_CFG_MAC_IFG_TX_IFG(4) | + DEV_MAC_CFG_MAC_IFG_RX_IFG1(5) | + DEV_MAC_CFG_MAC_IFG_RX_IFG2(1), + regs + DEV_MAC_CFG_MAC_IFG); + + /* Set link speed and release all resets */ + writel(DEV_DEV_CFG_DEV_RST_CTRL_SPEED_SEL(2), + regs + DEV_DEV_CFG_DEV_RST_CTRL); + + /* Make VLAN aware for CPU traffic */ + writel(ANA_CL_PORT_VLAN_CFG_AWARE_ENA | + ANA_CL_PORT_VLAN_CFG_POP_CNT(1) | + MAC_VID, + priv->regs[ANA_CL] + ANA_CL_PORT_VLAN_CFG(port)); + + /* Enable CPU port for any frame transfer */ + setbits_le32(priv->regs[QFWD] + QFWD_SYSTEM_SWITCH_PORT_MODE(port), + QFWD_SYSTEM_SWITCH_PORT_MODE_PORT_ENA); +} + +static int ram_init(u32 val, void __iomem *addr) +{ + writel(val, addr); + + if (wait_for_bit_le32(addr, BIT(1), false, 2000, false)) { + printf("Timeout in memory reset, reg = 0x%08x\n", val); + return 1; + } + + return 0; +} + +static int servalt_switch_init(struct servalt_private *priv) +{ + /* Initialize memories */ + ram_init(0x3, priv->regs[QSYS] + QSYS_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[ASM] + ASM_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[ANA_AC] + ANA_AC_RAM_CTRL_RAM_INIT); + ram_init(0x3, priv->regs[REW] + REW_RAM_CTRL_RAM_INIT); + + /* Reset counters */ + writel(0x1, priv->regs[ANA_AC] + ANA_AC_STAT_GLOBAL_CFG_PORT_RESET); + writel(0x1, priv->regs[ASM] + ASM_CFG_STAT_CFG); + + /* Enable switch-core and queue system */ + writel(0x1, priv->regs[QSYS] + QSYS_SYSTEM_RESET_CFG); + + return 0; +} + +static void servalt_switch_config(struct servalt_private *priv) +{ + writel(0x55555555, priv->regs[QSYS] + QSYS_CALCFG_CAL_AUTO); + + writel(readl(priv->regs[QSYS] + QSYS_CALCFG_CAL_CTRL) | + QSYS_CALCFG_CAL_CTRL_CAL_MODE(8), + priv->regs[QSYS] + QSYS_CALCFG_CAL_CTRL); +} + +static int servalt_initialize(struct servalt_private *priv) +{ + int ret, i; + + /* Initialize switch memories, enable core */ + ret = servalt_switch_init(priv); + if (ret) + return ret; + + servalt_switch_config(priv); + + for (i = 0; i < MAX_PORT; i++) + servalt_port_init(priv, i); + + servalt_cpu_capture_setup(priv); + + return 0; +} + +static inline +int servalt_vlant_wait_for_completion(struct servalt_private *priv) +{ + if (wait_for_bit_le32(priv->regs[LRN] + LRN_COMMON_ACCESS_CTRL, + LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT, + false, 2000, false)) + return -ETIMEDOUT; + + return 0; +} + +static int servalt_mac_table_add(struct servalt_private *priv, + const unsigned char mac[ETH_ALEN], int pgid) +{ + u32 macl = 0, mach = 0; + + /* + * Set the MAC address to handle and the vlan associated in a format + * understood by the hardware. + */ + mach |= MAC_VID << 16; + mach |= ((u32)mac[0]) << 8; + mach |= ((u32)mac[1]) << 0; + macl |= ((u32)mac[2]) << 24; + macl |= ((u32)mac[3]) << 16; + macl |= ((u32)mac[4]) << 8; + macl |= ((u32)mac[5]) << 0; + + writel(mach, priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG0); + writel(macl, priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG1); + + writel(LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_ADDR(pgid) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_TYPE(0x3) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_COPY | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_CPU_QU(0) | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_VLD | + LRN_COMMON_MAC_ACCESS_CFG2_MAC_ENTRY_LOCKED, + priv->regs[LRN] + LRN_COMMON_MAC_ACCESS_CFG2); + + writel(LRN_COMMON_ACCESS_CTRL_MAC_TABLE_ACCESS_SHOT, + priv->regs[LRN] + LRN_COMMON_ACCESS_CTRL); + + return servalt_vlant_wait_for_completion(priv); +} + +static int servalt_write_hwaddr(struct udevice *dev) +{ + struct servalt_private *priv = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + + return servalt_mac_table_add(priv, pdata->enetaddr, PGID_UNICAST); +} + +static int servalt_start(struct udevice *dev) +{ + struct servalt_private *priv = dev_get_priv(dev); + struct eth_pdata *pdata = dev_get_platdata(dev); + const unsigned char mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, + 0xff }; + int ret; + + ret = servalt_initialize(priv); + if (ret) + return ret; + + /* Set MAC address tables entries for CPU redirection */ + ret = servalt_mac_table_add(priv, mac, PGID_BROADCAST); + if (ret) + return ret; + + ret = servalt_mac_table_add(priv, pdata->enetaddr, PGID_UNICAST); + if (ret) + return ret; + + return 0; +} + +static void servalt_stop(struct udevice *dev) +{ +} + +static int servalt_send(struct udevice *dev, void *packet, int length) +{ + struct servalt_private *priv = dev_get_priv(dev); + u32 ifh[IFH_LEN]; + u32 *buf = packet; + + memset(ifh, '\0', IFH_LEN * 4); + + /* Set DST PORT_MASK */ + ifh[0] = htonl(0); + ifh[1] = htonl(0x1FFFFF); + ifh[2] = htonl(~0); + /* Set DST_MODE to INJECT and UPDATE_FCS */ + ifh[5] = htonl(0x4c0); + + return mscc_send(priv->regs[QS], servalt_regs_qs, + ifh, IFH_LEN, buf, length); +} + +static int servalt_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct servalt_private *priv = dev_get_priv(dev); + u32 *rxbuf = (u32 *)net_rx_packets[0]; + int byte_cnt = 0; + + byte_cnt = mscc_recv(priv->regs[QS], servalt_regs_qs, rxbuf, IFH_LEN, + false); + + *packetp = net_rx_packets[0]; + + return byte_cnt; +} + +static struct mii_dev *get_mdiobus(phys_addr_t base, unsigned long size) +{ + int i = 0; + + for (i = 0; i < SERVALT_MIIM_BUS_COUNT; ++i) + if (miim[i].miim_base == base && miim[i].miim_size == size) + return miim[i].bus; + + return NULL; +} + +static void add_port_entry(struct servalt_private *priv, size_t index, + size_t phy_addr, struct mii_dev *bus) +{ + priv->ports[index].phy_addr = phy_addr; + priv->ports[index].bus = bus; +} + +static int servalt_probe(struct udevice *dev) +{ + struct servalt_private *priv = dev_get_priv(dev); + int i; + struct resource res; + fdt32_t faddr; + phys_addr_t addr_base; + unsigned long addr_size; + ofnode eth_node, node, mdio_node; + size_t phy_addr; + struct mii_dev *bus; + struct ofnode_phandle_args phandle; + + if (!priv) + return -EINVAL; + + /* Get registers and map them to the private structure */ + for (i = 0; i < ARRAY_SIZE(regs_names); i++) { + priv->regs[i] = dev_remap_addr_name(dev, regs_names[i]); + if (!priv->regs[i]) { + debug + ("Error can't get regs base addresses for %s\n", + regs_names[i]); + return -ENOMEM; + } + } + + /* Initialize miim buses */ + memset(&miim, 0x0, sizeof(struct mscc_miim_dev) * + SERVALT_MIIM_BUS_COUNT); + + /* iterate all the ports and find out on which bus they are */ + i = 0; + eth_node = dev_read_first_subnode(dev); + for (node = ofnode_first_subnode(eth_node); + ofnode_valid(node); + node = ofnode_next_subnode(node)) { + if (ofnode_read_resource(node, 0, &res)) + return -ENOMEM; + i = res.start; + + ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0, + &phandle); + + /* Get phy address on mdio bus */ + if (ofnode_read_resource(phandle.node, 0, &res)) + return -ENOMEM; + phy_addr = res.start; + + /* Get mdio node */ + mdio_node = ofnode_get_parent(phandle.node); + + if (ofnode_read_resource(mdio_node, 0, &res)) + return -ENOMEM; + faddr = cpu_to_fdt32(res.start); + + addr_base = ofnode_translate_address(mdio_node, &faddr); + addr_size = res.end - res.start; + + /* If the bus is new then create a new bus */ + if (!get_mdiobus(addr_base, addr_size)) + priv->bus[miim_count] = + servalt_mdiobus_init(addr_base, addr_size); + + /* Connect mdio bus with the port */ + bus = get_mdiobus(addr_base, addr_size); + add_port_entry(priv, i, phy_addr, bus); + } + + mscc_phy_reset(); + + for (i = 0; i < MAX_PORT; i++) { + if (!priv->ports[i].bus) + continue; + + phy_connect(priv->ports[i].bus, priv->ports[i].phy_addr, dev, + PHY_INTERFACE_MODE_NONE); + } + + return 0; +} + +static int servalt_remove(struct udevice *dev) +{ + struct servalt_private *priv = dev_get_priv(dev); + int i; + + for (i = 0; i < SERVALT_MIIM_BUS_COUNT; i++) { + mdio_unregister(priv->bus[i]); + mdio_free(priv->bus[i]); + } + + return 0; +} + +static const struct eth_ops servalt_ops = { + .start = servalt_start, + .stop = servalt_stop, + .send = servalt_send, + .recv = servalt_recv, + .write_hwaddr = servalt_write_hwaddr, +}; + +static const struct udevice_id mscc_servalt_ids[] = { + {.compatible = "mscc,vsc7437-switch" }, + { /* Sentinel */ } +}; + +U_BOOT_DRIVER(servalt) = { + .name = "servalt-switch", + .id = UCLASS_ETH, + .of_match = mscc_servalt_ids, + .probe = servalt_probe, + .remove = servalt_remove, + .ops = &servalt_ops, + .priv_auto_alloc_size = sizeof(struct servalt_private), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), +}; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 32bbf41dd1..102fb91fff 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -174,4 +174,12 @@ config KEYSTONE_USB_PHY This PHY is found on some Keystone (K2) devices supporting USB. +config MT76X8_USB_PHY + bool "MediaTek MT76x8 (7628/88) USB PHY support" + depends on PHY + help + Support the USB PHY in MT76x8 SoCs + + This PHY is found on MT76x8 devices supporting USB. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 099551d693..b55917bce1 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_MESON_GXL_USB_PHY) += meson-gxl-usb2.o meson-gxl-usb3.o obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o obj-$(CONFIG_OMAP_USB2_PHY) += omap-usb2-phy.o obj-$(CONFIG_KEYSTONE_USB_PHY) += keystone-usb-phy.o +obj-$(CONFIG_MT76X8_USB_PHY) += mt76x8-usb-phy.o diff --git a/drivers/phy/mt76x8-usb-phy.c b/drivers/phy/mt76x8-usb-phy.c new file mode 100644 index 0000000000..268da8ef6c --- /dev/null +++ b/drivers/phy/mt76x8-usb-phy.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Stefan Roese + * + * Derived from linux/drivers/phy/ralink/phy-ralink-usb.c + * Copyright (C) 2017 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RT_SYSC_REG_SYSCFG1 0x014 +#define RT_SYSC_REG_CLKCFG1 0x030 +#define RT_SYSC_REG_USB_PHY_CFG 0x05c + +#define OFS_U2_PHY_AC0 0x800 +#define OFS_U2_PHY_AC1 0x804 +#define OFS_U2_PHY_AC2 0x808 +#define OFS_U2_PHY_ACR0 0x810 +#define OFS_U2_PHY_ACR1 0x814 +#define OFS_U2_PHY_ACR2 0x818 +#define OFS_U2_PHY_ACR3 0x81C +#define OFS_U2_PHY_ACR4 0x820 +#define OFS_U2_PHY_AMON0 0x824 +#define OFS_U2_PHY_DCR0 0x860 +#define OFS_U2_PHY_DCR1 0x864 +#define OFS_U2_PHY_DTM0 0x868 +#define OFS_U2_PHY_DTM1 0x86C + +#define RT_RSTCTRL_UDEV BIT(25) +#define RT_RSTCTRL_UHST BIT(22) +#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) + +#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) +#define MT7620_CLKCFG1_UPHY1_CLK_EN BIT(22) +#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) +#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) + +#define USB_PHY_UTMI_8B60M BIT(1) +#define UDEV_WAKEUP BIT(0) + +struct mt76x8_usb_phy { + u32 clk; + void __iomem *base; + struct regmap *sysctl; +}; + +static void u2_phy_w32(struct mt76x8_usb_phy *phy, u32 val, u32 reg) +{ + writel(val, phy->base + reg); +} + +static u32 u2_phy_r32(struct mt76x8_usb_phy *phy, u32 reg) +{ + return readl(phy->base + reg); +} + +static void mt76x8_usb_phy_init(struct mt76x8_usb_phy *phy) +{ + u2_phy_r32(phy, OFS_U2_PHY_AC2); + u2_phy_r32(phy, OFS_U2_PHY_ACR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + + u2_phy_w32(phy, 0x00ffff02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00555502, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00aaaa02, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x00000402, OFS_U2_PHY_DCR0); + u2_phy_r32(phy, OFS_U2_PHY_DCR0); + u2_phy_w32(phy, 0x0048086a, OFS_U2_PHY_AC0); + u2_phy_w32(phy, 0x4400001c, OFS_U2_PHY_AC1); + u2_phy_w32(phy, 0xc0200000, OFS_U2_PHY_ACR3); + u2_phy_w32(phy, 0x02000000, OFS_U2_PHY_DTM0); +} + +static int mt76x8_usb_phy_power_on(struct phy *_phy) +{ + struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev); + u32 t; + + /* enable the phy */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, + phy->clk, phy->clk); + + /* setup host mode */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_SYSCFG1, + RT_SYSCFG1_USB0_HOST_MODE, + RT_SYSCFG1_USB0_HOST_MODE); + + /* + * The SDK kernel had a delay of 100ms. however on device + * testing showed that 10ms is enough + */ + mdelay(10); + + if (phy->base) + mt76x8_usb_phy_init(phy); + + /* print some status info */ + regmap_read(phy->sysctl, RT_SYSC_REG_USB_PHY_CFG, &t); + printf("remote usb device wakeup %s\n", + (t & UDEV_WAKEUP) ? "enabled" : "disabled"); + if (t & USB_PHY_UTMI_8B60M) + printf("UTMI 8bit 60MHz\n"); + else + printf("UTMI 16bit 30MHz\n"); + + return 0; +} + +static int mt76x8_usb_phy_power_off(struct phy *_phy) +{ + struct mt76x8_usb_phy *phy = dev_get_priv(_phy->dev); + + /* disable the phy */ + regmap_update_bits(phy->sysctl, RT_SYSC_REG_CLKCFG1, + phy->clk, 0); + + return 0; +} + +static int mt76x8_usb_phy_probe(struct udevice *dev) +{ + struct mt76x8_usb_phy *phy = dev_get_priv(dev); + + phy->sysctl = syscon_regmap_lookup_by_phandle(dev, "ralink,sysctl"); + if (IS_ERR(phy->sysctl)) + return PTR_ERR(phy->sysctl); + + phy->base = dev_read_addr_ptr(dev); + if (!phy->base) + return -EINVAL; + + return 0; +} + +static struct phy_ops mt76x8_usb_phy_ops = { + .power_on = mt76x8_usb_phy_power_on, + .power_off = mt76x8_usb_phy_power_off, +}; + +static const struct udevice_id mt76x8_usb_phy_ids[] = { + { .compatible = "mediatek,mt7628-usbphy" }, + { } +}; + +U_BOOT_DRIVER(mt76x8_usb_phy) = { + .name = "mt76x8_usb_phy", + .id = UCLASS_PHY, + .of_match = mt76x8_usb_phy_ids, + .ops = &mt76x8_usb_phy_ops, + .probe = mt76x8_usb_phy_probe, + .priv_auto_alloc_size = sizeof(struct mt76x8_usb_phy), +}; diff --git a/drivers/pinctrl/ath79/Makefile b/drivers/pinctrl/ath79/Makefile index 1daa2123a1..c7d1e44882 100644 --- a/drivers/pinctrl/ath79/Makefile +++ b/drivers/pinctrl/ath79/Makefile @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+ obj-$(CONFIG_PINCTRL_AR933X) += pinctrl_ar933x.o -obj-$(CONFIG_PINCTRL_QCA953x) += pinctrl_qca953x.o +obj-$(CONFIG_PINCTRL_QCA953X) += pinctrl_qca953x.o diff --git a/include/configs/ap152.h b/include/configs/ap152.h new file mode 100644 index 0000000000..c948a44054 --- /dev/null +++ b/include/configs/ap152.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2018 Rosy Song + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SYS_MHZ 375 +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MALLOC_LEN 0x40000 +#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 + +#define CONFIG_SYS_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_LOAD_ADDR 0x81000000 + +#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1) + +/* + * Serial Port + */ +#define CONFIG_SYS_NS16550_CLK 25000000 +#define CONFIG_SYS_BAUDRATE_TABLE \ + {9600, 19200, 38400, 57600, 115200} + +#define CONFIG_BOOTCOMMAND "sf probe;" \ + "mtdparts default;" \ + "bootm 0x9f060000" + +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_SIZE 0x10000 + +/* Miscellaneous configurable options */ + +/* + * Diagnostics + */ +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x83f00000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/vcoreiii.h b/include/configs/vcoreiii.h index 2840c7b815..8c68372026 100644 --- a/include/configs/vcoreiii.h +++ b/include/configs/vcoreiii.h @@ -10,7 +10,7 @@ /* Onboard devices */ -#define CONFIG_SYS_MALLOC_LEN 0x100000 +#define CONFIG_SYS_MALLOC_LEN 0x1F0000 #define CONFIG_SYS_LOAD_ADDR 0x00100000 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 @@ -27,7 +27,7 @@ #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET) #define CONFIG_ENV_OFFSET (1024 * 1024) -#define CONFIG_ENV_SIZE (256 * 1024) +#define CONFIG_ENV_SIZE (8 * 1024) #define CONFIG_ENV_SECT_SIZE (256 * 1024) #define CONFIG_SYS_REDUNDAND_ENVIRONMENT diff --git a/include/dt-bindings/mscc/jr2_data.h b/include/dt-bindings/mscc/jr2_data.h new file mode 100644 index 0000000000..2f06fc5c5d --- /dev/null +++ b/include/dt-bindings/mscc/jr2_data.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ +/* + * Copyright (c) 2018 Microsemi Corporation + */ + +#ifndef _JR2_DATA_H_ +#define _JR2_DATA_H_ + +#define SERDES1G(x) (x) +#define SERDES1G_MAX SERDES1G(10) +#define SERDES6G(x) (SERDES1G_MAX + 1 + (x)) +#define SERDES6G_MAX SERDES6G(17) +#define SERDES_MAX (SERDES6G_MAX + 1) + +/* similar with phy_interface_t */ +#define PHY_MODE_SGMII 2 +#define PHY_MODE_QSGMII 4 + +#endif