From 073e8ee5df4844f53b68ddf108c9ef43c7f18251 Mon Sep 17 00:00:00 2001 From: Aaron Williams Date: Wed, 2 Sep 2020 08:29:05 +0200 Subject: [PATCH] mips: octeon: Add octeon_ddr.h header This header will be used by the DDR driver (lmc). Its ported from the 2013 Cavium / Marvell U-Boot repository. Signed-off-by: Aaron Williams Signed-off-by: Stefan Roese --- .../mach-octeon/include/mach/octeon_ddr.h | 982 ++++++++++++++++++ 1 file changed, 982 insertions(+) create mode 100644 arch/mips/mach-octeon/include/mach/octeon_ddr.h diff --git a/arch/mips/mach-octeon/include/mach/octeon_ddr.h b/arch/mips/mach-octeon/include/mach/octeon_ddr.h new file mode 100644 index 0000000000..4473be4d44 --- /dev/null +++ b/arch/mips/mach-octeon/include/mach/octeon_ddr.h @@ -0,0 +1,982 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2020 Marvell International Ltd. + */ + +#ifndef __OCTEON_DDR_H_ +#define __OCTEON_DDR_H_ + +#include +#include +#include +#include +#include +#include + +/* Mapping is done starting from 0x11800.80000000 */ +#define CVMX_L2C_CTL 0x00800000 +#define CVMX_L2C_BIG_CTL 0x00800030 +#define CVMX_L2C_TADX_INT(i) (0x00a00028 + (((i) & 7) * 0x40000)) +#define CVMX_L2C_MCIX_INT(i) (0x00c00028 + (((i) & 3) * 0x40000)) + +/* Some "external" (non-LMC) registers */ +#define CVMX_IPD_CLK_COUNT 0x00014F0000000338 +#define CVMX_FPA_CLK_COUNT 0x00012800000000F0 + +#define CVMX_NODE_MEM_SHIFT 40 + +#define DDR_INTERFACE_MAX 4 + +/* Private data struct */ +struct ddr_priv { + void __iomem *lmc_base; + void __iomem *l2c_base; + + bool ddr_clock_initialized[DDR_INTERFACE_MAX]; + bool ddr_memory_preserved; + u32 flags; + + struct ram_info info; +}; + +/* Short cut to convert a number to megabytes */ +#define MB(X) ((u64)(X) * (u64)(1024 * 1024)) + +#define octeon_is_cpuid(x) (__OCTEON_IS_MODEL_COMPILE__(x, read_c0_prid())) + +#define strtoull simple_strtoull + +/* Access LMC registers */ +static inline u64 lmc_rd(struct ddr_priv *priv, u64 addr) +{ + return ioread64(priv->lmc_base + addr); +} + +static inline void lmc_wr(struct ddr_priv *priv, u64 addr, u64 val) +{ + iowrite64(val, priv->lmc_base + addr); +} + +/* Access L2C registers */ +static inline u64 l2c_rd(struct ddr_priv *priv, u64 addr) +{ + return ioread64(priv->l2c_base + addr); +} + +static inline void l2c_wr(struct ddr_priv *priv, u64 addr, u64 val) +{ + iowrite64(val, priv->l2c_base + addr); +} + +/* Access other CSR registers not located inside the LMC address space */ +static inline u64 csr_rd(u64 addr) +{ + void __iomem *base; + + base = ioremap_nocache(addr, 0x100); + return ioread64(base); +} + +static inline void csr_wr(u64 addr, u64 val) +{ + void __iomem *base; + + base = ioremap_nocache(addr, 0x100); + return iowrite64(val, base); +} + +/* "Normal" access, without any offsets and/or mapping */ +static inline u64 cvmx_read64_uint64(u64 addr) +{ + return readq((void *)addr); +} + +static inline void cvmx_write64_uint64(u64 addr, u64 val) +{ + writeq(val, (void *)addr); +} + +/* Failsafe mode */ +#define FLAG_FAILSAFE_MODE 0x01000 +/* Note that the DDR clock initialized flags must be contiguous */ +/* Clock for DDR 0 initialized */ +#define FLAG_DDR0_CLK_INITIALIZED 0x02000 +/* Clock for DDR 1 initialized */ +#define FLAG_DDR1_CLK_INITIALIZED 0x04000 +/* Clock for DDR 2 initialized */ +#define FLAG_DDR2_CLK_INITIALIZED 0x08000 +/* Clock for DDR 3 initialized */ +#define FLAG_DDR3_CLK_INITIALIZED 0x10000 +/* Loaded into RAM externally */ +#define FLAG_RAM_RESIDENT 0x20000 +/* Verbose DDR information */ +#define FLAG_DDR_VERBOSE 0x40000 +/* Check env. for DDR variables */ +#define FLAG_DDR_DEBUG 0x80000 +#define FLAG_DDR_TRACE_INIT 0x100000 +#define FLAG_MEMORY_PRESERVED 0x200000 +#define FLAG_DFM_VERBOSE 0x400000 +#define FLAG_DFM_TRACE_INIT 0x800000 +/* DFM memory clock initialized */ +#define FLAG_DFM_CLK_INITIALIZED 0x1000000 +/* EEPROM clock descr. missing */ +#define FLAG_CLOCK_DESC_MISSING 0x2000000 +/* EEPROM board descr. missing */ +#define FLAG_BOARD_DESC_MISSING 0x4000000 +#define FLAG_DDR_PROMPT 0x8000000 + +#ifndef DDR_NO_DEBUG +static inline int ddr_verbose(struct ddr_priv *priv) +{ + return !!(priv->flags & FLAG_DDR_VERBOSE); +} + +static inline char *ddr_getenv_debug(struct ddr_priv *priv, char *name) +{ + if (priv->flags & FLAG_FAILSAFE_MODE) + return NULL; + + if (priv->flags & FLAG_DDR_DEBUG) + return env_get(name); + + return NULL; +} +#else +static inline int ddr_verbose(void) +{ + return 0; +} +#endif + +/* turn the variable name into a string */ +#define CVMX_TMP_STR(x) CVMX_TMP_STR2(x) +#define CVMX_TMP_STR2(x) #x + +#define CVMX_SYNC asm volatile ("sync" : : : "memory") + +#define CVMX_CACHE(op, address, offset) \ + asm volatile ("cache " CVMX_TMP_STR(op) ", " \ + CVMX_TMP_STR(offset) "(%[rbase])" \ + : : [rbase] "d" (address)) + +/* unlock the state */ +#define CVMX_CACHE_WBIL2(address, offset) \ + CVMX_CACHE(23, address, offset) + +/* complete prefetches, invalidate entire dcache */ +#define CVMX_DCACHE_INVALIDATE \ + { CVMX_SYNC; asm volatile ("cache 9, 0($0)" : : ); } + +/** + * cvmx_l2c_cfg + * + * Specify the RSL base addresses for the block + * + * L2C_CFG = L2C Configuration + * + * Description: + */ +union cvmx_l2c_cfg { + u64 u64; + struct cvmx_l2c_cfg_s { + uint64_t reserved_20_63:44; + uint64_t bstrun:1; + uint64_t lbist:1; + uint64_t xor_bank:1; + uint64_t dpres1:1; + uint64_t dpres0:1; + uint64_t dfill_dis:1; + uint64_t fpexp:4; + uint64_t fpempty:1; + uint64_t fpen:1; + uint64_t idxalias:1; + uint64_t mwf_crd:4; + uint64_t rsp_arb_mode:1; + uint64_t rfb_arb_mode:1; + uint64_t lrf_arb_mode:1; + } s; +}; + +/** + * cvmx_l2c_ctl + * + * L2C_CTL = L2C Control + * + * + * Notes: + * (1) If MAXVAB is != 0, VAB_THRESH should be less than MAXVAB. + * + * (2) L2DFDBE and L2DFSBE allows software to generate L2DSBE, L2DDBE, VBFSBE, + * and VBFDBE errors for the purposes of testing error handling code. When + * one (or both) of these bits are set a PL2 which misses in the L2 will fill + * with the appropriate error in the first 2 OWs of the fill. Software can + * determine which OW pair gets the error by choosing the desired fill order + * (address<6:5>). A PL2 which hits in the L2 will not inject any errors. + * Therefore sending a WBIL2 prior to the PL2 is recommended to make a miss + * likely (if multiple processors are involved software must be careful to be + * sure no other processor or IO device can bring the block into the L2). + * + * To generate a VBFSBE or VBFDBE, software must first get the cache block + * into the cache with an error using a PL2 which misses the L2. Then a + * store partial to a portion of the cache block without the error must + * change the block to dirty. Then, a subsequent WBL2/WBIL2/victim will + * trigger the VBFSBE/VBFDBE error. + */ +union cvmx_l2c_ctl { + u64 u64; + struct cvmx_l2c_ctl_s { + uint64_t reserved_29_63:35; + uint64_t rdf_fast:1; + uint64_t disstgl2i:1; + uint64_t l2dfsbe:1; + uint64_t l2dfdbe:1; + uint64_t discclk:1; + uint64_t maxvab:4; + uint64_t maxlfb:4; + uint64_t rsp_arb_mode:1; + uint64_t xmc_arb_mode:1; + uint64_t reserved_2_13:12; + uint64_t disecc:1; + uint64_t disidxalias:1; + } s; + + struct cvmx_l2c_ctl_cn73xx { + uint64_t reserved_32_63:32; + uint64_t ocla_qos:3; + uint64_t reserved_28_28:1; + uint64_t disstgl2i:1; + uint64_t reserved_25_26:2; + uint64_t discclk:1; + uint64_t reserved_16_23:8; + uint64_t rsp_arb_mode:1; + uint64_t xmc_arb_mode:1; + uint64_t rdf_cnt:8; + uint64_t reserved_4_5:2; + uint64_t disldwb:1; + uint64_t dissblkdty:1; + uint64_t disecc:1; + uint64_t disidxalias:1; + } cn73xx; + + struct cvmx_l2c_ctl_cn73xx cn78xx; +}; + +/** + * cvmx_l2c_big_ctl + * + * L2C_BIG_CTL = L2C Big memory control register + * + * + * Notes: + * (1) BIGRD interrupts can occur during normal operation as the PP's are + * allowed to prefetch to non-existent memory locations. Therefore, + * BIGRD is for informational purposes only. + * + * (2) When HOLEWR/BIGWR blocks a store L2C_VER_ID, L2C_VER_PP, L2C_VER_IOB, + * and L2C_VER_MSC will be loaded just like a store which is blocked by VRTWR. + * Additionally, L2C_ERR_XMC will be loaded. + */ +union cvmx_l2c_big_ctl { + u64 u64; + struct cvmx_l2c_big_ctl_s { + uint64_t reserved_8_63:56; + uint64_t maxdram:4; + uint64_t reserved_0_3:4; + } s; + struct cvmx_l2c_big_ctl_cn61xx { + uint64_t reserved_8_63:56; + uint64_t maxdram:4; + uint64_t reserved_1_3:3; + uint64_t disable:1; + } cn61xx; + struct cvmx_l2c_big_ctl_cn61xx cn63xx; + struct cvmx_l2c_big_ctl_cn61xx cn66xx; + struct cvmx_l2c_big_ctl_cn61xx cn68xx; + struct cvmx_l2c_big_ctl_cn61xx cn68xxp1; + struct cvmx_l2c_big_ctl_cn70xx { + uint64_t reserved_8_63:56; + uint64_t maxdram:4; + uint64_t reserved_1_3:3; + uint64_t disbig:1; + } cn70xx; + struct cvmx_l2c_big_ctl_cn70xx cn70xxp1; + struct cvmx_l2c_big_ctl_cn70xx cn73xx; + struct cvmx_l2c_big_ctl_cn70xx cn78xx; + struct cvmx_l2c_big_ctl_cn70xx cn78xxp1; + struct cvmx_l2c_big_ctl_cn61xx cnf71xx; + struct cvmx_l2c_big_ctl_cn70xx cnf75xx; +}; + +struct rlevel_byte_data { + int delay; + int loop_total; + int loop_count; + int best; + u64 bm; + int bmerrs; + int sqerrs; + int bestsq; +}; + +#define DEBUG_VALIDATE_BITMASK 0 +#if DEBUG_VALIDATE_BITMASK +#define debug_bitmask_print printf +#else +#define debug_bitmask_print(...) +#endif + +#define RLEVEL_BITMASK_TRAILING_BITS_ERROR 5 +// FIXME? now less than TOOLONG +#define RLEVEL_BITMASK_BUBBLE_BITS_ERROR 11 +#define RLEVEL_BITMASK_NARROW_ERROR 6 +#define RLEVEL_BITMASK_BLANK_ERROR 100 +#define RLEVEL_BITMASK_TOOLONG_ERROR 12 +#define RLEVEL_NONSEQUENTIAL_DELAY_ERROR 50 +#define RLEVEL_ADJACENT_DELAY_ERROR 30 + +/* + * Apply a filter to the BITMASK results returned from Octeon + * read-leveling to determine the most likely delay result. This + * computed delay may be used to qualify the delay result returned by + * Octeon. Accumulate an error penalty for invalid characteristics of + * the bitmask so that they can be used to select the most reliable + * results. + * + * The algorithm searches for the largest contiguous MASK within a + * maximum RANGE of bits beginning with the MSB. + * + * 1. a MASK with a WIDTH less than 4 will be penalized + * 2. Bubbles in the bitmask that occur before or after the MASK + * will be penalized + * 3. If there are no trailing bubbles then extra bits that occur + * beyond the maximum RANGE will be penalized. + * + * +++++++++++++++++++++++++++++++++++++++++++++++++++ + * + + + * + e.g. bitmask = 27B00 + + * + + + * + 63 +--- mstart 0 + + * + | | | + + * + | +---------+ +--- fb | + + * + | | range | | | + + * + V V V V V + + * + + + * + 0 0 ... 1 0 0 1 1 1 1 0 1 1 0 0 0 0 0 0 0 0 + + * + + + * + ^ ^ ^ + + * + | | mask| + + * + lb ---+ +-----+ + + * + width + + * + + + * +++++++++++++++++++++++++++++++++++++++++++++++++++ + */ + +struct rlevel_bitmask { + u64 bm; + u8 mstart; + u8 width; + int errs; +}; + +#define MASKRANGE_BITS 6 +#define MASKRANGE ((1 << MASKRANGE_BITS) - 1) + +/* data field addresses in the DDR2 SPD eeprom */ +enum ddr2_spd_addrs { + DDR2_SPD_BYTES_PROGRAMMED = 0, + DDR2_SPD_TOTAL_BYTES = 1, + DDR2_SPD_MEM_TYPE = 2, + DDR2_SPD_NUM_ROW_BITS = 3, + DDR2_SPD_NUM_COL_BITS = 4, + DDR2_SPD_NUM_RANKS = 5, + DDR2_SPD_CYCLE_CLX = 9, + DDR2_SPD_CONFIG_TYPE = 11, + DDR2_SPD_REFRESH = 12, + DDR2_SPD_SDRAM_WIDTH = 13, + DDR2_SPD_BURST_LENGTH = 16, + DDR2_SPD_NUM_BANKS = 17, + DDR2_SPD_CAS_LATENCY = 18, + DDR2_SPD_DIMM_TYPE = 20, + DDR2_SPD_CYCLE_CLX1 = 23, + DDR2_SPD_CYCLE_CLX2 = 25, + DDR2_SPD_TRP = 27, + DDR2_SPD_TRRD = 28, + DDR2_SPD_TRCD = 29, + DDR2_SPD_TRAS = 30, + DDR2_SPD_TWR = 36, + DDR2_SPD_TWTR = 37, + DDR2_SPD_TRFC_EXT = 40, + DDR2_SPD_TRFC = 42, + DDR2_SPD_CHECKSUM = 63, + DDR2_SPD_MFR_ID = 64 +}; + +/* data field addresses in the DDR2 SPD eeprom */ +enum ddr3_spd_addrs { + DDR3_SPD_BYTES_PROGRAMMED = 0, + DDR3_SPD_REVISION = 1, + DDR3_SPD_KEY_BYTE_DEVICE_TYPE = 2, + DDR3_SPD_KEY_BYTE_MODULE_TYPE = 3, + DDR3_SPD_DENSITY_BANKS = 4, + DDR3_SPD_ADDRESSING_ROW_COL_BITS = 5, + DDR3_SPD_NOMINAL_VOLTAGE = 6, + DDR3_SPD_MODULE_ORGANIZATION = 7, + DDR3_SPD_MEMORY_BUS_WIDTH = 8, + DDR3_SPD_FINE_TIMEBASE_DIVIDEND_DIVISOR = 9, + DDR3_SPD_MEDIUM_TIMEBASE_DIVIDEND = 10, + DDR3_SPD_MEDIUM_TIMEBASE_DIVISOR = 11, + DDR3_SPD_MINIMUM_CYCLE_TIME_TCKMIN = 12, + DDR3_SPD_CAS_LATENCIES_LSB = 14, + DDR3_SPD_CAS_LATENCIES_MSB = 15, + DDR3_SPD_MIN_CAS_LATENCY_TAAMIN = 16, + DDR3_SPD_MIN_WRITE_RECOVERY_TWRMIN = 17, + DDR3_SPD_MIN_RAS_CAS_DELAY_TRCDMIN = 18, + DDR3_SPD_MIN_ROW_ACTIVE_DELAY_TRRDMIN = 19, + DDR3_SPD_MIN_ROW_PRECHARGE_DELAY_TRPMIN = 20, + DDR3_SPD_UPPER_NIBBLES_TRAS_TRC = 21, + DDR3_SPD_MIN_ACTIVE_PRECHARGE_LSB_TRASMIN = 22, + DDR3_SPD_MIN_ACTIVE_REFRESH_LSB_TRCMIN = 23, + DDR3_SPD_MIN_REFRESH_RECOVERY_LSB_TRFCMIN = 24, + DDR3_SPD_MIN_REFRESH_RECOVERY_MSB_TRFCMIN = 25, + DDR3_SPD_MIN_INTERNAL_WRITE_READ_CMD_TWTRMIN = 26, + DDR3_SPD_MIN_INTERNAL_READ_PRECHARGE_CMD_TRTPMIN = 27, + DDR3_SPD_UPPER_NIBBLE_TFAW = 28, + DDR3_SPD_MIN_FOUR_ACTIVE_WINDOW_TFAWMIN = 29, + DDR3_SPD_SDRAM_OPTIONAL_FEATURES = 30, + DDR3_SPD_SDRAM_THERMAL_REFRESH_OPTIONS = 31, + DDR3_SPD_MODULE_THERMAL_SENSOR = 32, + DDR3_SPD_SDRAM_DEVICE_TYPE = 33, + DDR3_SPD_MINIMUM_CYCLE_TIME_FINE_TCKMIN = 34, + DDR3_SPD_MIN_CAS_LATENCY_FINE_TAAMIN = 35, + DDR3_SPD_MIN_RAS_CAS_DELAY_FINE_TRCDMIN = 36, + DDR3_SPD_MIN_ROW_PRECHARGE_DELAY_FINE_TRPMIN = 37, + DDR3_SPD_MIN_ACTIVE_REFRESH_LSB_FINE_TRCMIN = 38, + DDR3_SPD_REFERENCE_RAW_CARD = 62, + DDR3_SPD_ADDRESS_MAPPING = 63, + DDR3_SPD_REGISTER_MANUFACTURER_ID_LSB = 65, + DDR3_SPD_REGISTER_MANUFACTURER_ID_MSB = 66, + DDR3_SPD_REGISTER_REVISION_NUMBER = 67, + DDR3_SPD_MODULE_SERIAL_NUMBER = 122, + DDR3_SPD_CYCLICAL_REDUNDANCY_CODE_LOWER_NIBBLE = 126, + DDR3_SPD_CYCLICAL_REDUNDANCY_CODE_UPPER_NIBBLE = 127, + DDR3_SPD_MODULE_PART_NUMBER = 128 +}; + +/* data field addresses in the DDR4 SPD eeprom */ +enum ddr4_spd_addrs { + DDR4_SPD_BYTES_PROGRAMMED = 0, + DDR4_SPD_REVISION = 1, + DDR4_SPD_KEY_BYTE_DEVICE_TYPE = 2, + DDR4_SPD_KEY_BYTE_MODULE_TYPE = 3, + DDR4_SPD_DENSITY_BANKS = 4, + DDR4_SPD_ADDRESSING_ROW_COL_BITS = 5, + DDR4_SPD_PACKAGE_TYPE = 6, + DDR4_SPD_OPTIONAL_FEATURES = 7, + DDR4_SPD_THERMAL_REFRESH_OPTIONS = 8, + DDR4_SPD_OTHER_OPTIONAL_FEATURES = 9, + DDR4_SPD_SECONDARY_PACKAGE_TYPE = 10, + DDR4_SPD_MODULE_NOMINAL_VOLTAGE = 11, + DDR4_SPD_MODULE_ORGANIZATION = 12, + DDR4_SPD_MODULE_MEMORY_BUS_WIDTH = 13, + DDR4_SPD_MODULE_THERMAL_SENSOR = 14, + DDR4_SPD_RESERVED_BYTE15 = 15, + DDR4_SPD_RESERVED_BYTE16 = 16, + DDR4_SPD_TIMEBASES = 17, + DDR4_SPD_MINIMUM_CYCLE_TIME_TCKAVGMIN = 18, + DDR4_SPD_MAXIMUM_CYCLE_TIME_TCKAVGMAX = 19, + DDR4_SPD_CAS_LATENCIES_BYTE0 = 20, + DDR4_SPD_CAS_LATENCIES_BYTE1 = 21, + DDR4_SPD_CAS_LATENCIES_BYTE2 = 22, + DDR4_SPD_CAS_LATENCIES_BYTE3 = 23, + DDR4_SPD_MIN_CAS_LATENCY_TAAMIN = 24, + DDR4_SPD_MIN_RAS_CAS_DELAY_TRCDMIN = 25, + DDR4_SPD_MIN_ROW_PRECHARGE_DELAY_TRPMIN = 26, + DDR4_SPD_UPPER_NIBBLES_TRAS_TRC = 27, + DDR4_SPD_MIN_ACTIVE_PRECHARGE_LSB_TRASMIN = 28, + DDR4_SPD_MIN_ACTIVE_REFRESH_LSB_TRCMIN = 29, + DDR4_SPD_MIN_REFRESH_RECOVERY_LSB_TRFC1MIN = 30, + DDR4_SPD_MIN_REFRESH_RECOVERY_MSB_TRFC1MIN = 31, + DDR4_SPD_MIN_REFRESH_RECOVERY_LSB_TRFC2MIN = 32, + DDR4_SPD_MIN_REFRESH_RECOVERY_MSB_TRFC2MIN = 33, + DDR4_SPD_MIN_REFRESH_RECOVERY_LSB_TRFC4MIN = 34, + DDR4_SPD_MIN_REFRESH_RECOVERY_MSB_TRFC4MIN = 35, + DDR4_SPD_MIN_FOUR_ACTIVE_WINDOW_MSN_TFAWMIN = 36, + DDR4_SPD_MIN_FOUR_ACTIVE_WINDOW_LSB_TFAWMIN = 37, + DDR4_SPD_MIN_ROW_ACTIVE_DELAY_SAME_TRRD_SMIN = 38, + DDR4_SPD_MIN_ROW_ACTIVE_DELAY_DIFF_TRRD_LMIN = 39, + DDR4_SPD_MIN_CAS_TO_CAS_DELAY_TCCD_LMIN = 40, + DDR4_SPD_MIN_CAS_TO_CAS_DELAY_FINE_TCCD_LMIN = 117, + DDR4_SPD_MIN_ACT_TO_ACT_DELAY_SAME_FINE_TRRD_LMIN = 118, + DDR4_SPD_MIN_ACT_TO_ACT_DELAY_DIFF_FINE_TRRD_SMIN = 119, + DDR4_SPD_MIN_ACT_TO_ACT_REFRESH_DELAY_FINE_TRCMIN = 120, + DDR4_SPD_MIN_ROW_PRECHARGE_DELAY_FINE_TRPMIN = 121, + DDR4_SPD_MIN_RAS_TO_CAS_DELAY_FINE_TRCDMIN = 122, + DDR4_SPD_MIN_CAS_LATENCY_FINE_TAAMIN = 123, + DDR4_SPD_MAX_CYCLE_TIME_FINE_TCKAVGMAX = 124, + DDR4_SPD_MIN_CYCLE_TIME_FINE_TCKAVGMIN = 125, + DDR4_SPD_CYCLICAL_REDUNDANCY_CODE_LOWER_NIBBLE = 126, + DDR4_SPD_CYCLICAL_REDUNDANCY_CODE_UPPER_NIBBLE = 127, + DDR4_SPD_REFERENCE_RAW_CARD = 130, + DDR4_SPD_UDIMM_ADDR_MAPPING_FROM_EDGE = 131, + DDR4_SPD_REGISTER_MANUFACTURER_ID_LSB = 133, + DDR4_SPD_REGISTER_MANUFACTURER_ID_MSB = 134, + DDR4_SPD_REGISTER_REVISION_NUMBER = 135, + DDR4_SPD_RDIMM_ADDR_MAPPING_FROM_REGISTER_TO_DRAM = 136, + DDR4_SPD_RDIMM_REGISTER_DRIVE_STRENGTH_CTL = 137, + DDR4_SPD_RDIMM_REGISTER_DRIVE_STRENGTH_CK = 138, +}; + +#define SPD_EEPROM_SIZE (DDR4_SPD_RDIMM_REGISTER_DRIVE_STRENGTH_CK + 1) + +struct impedence_values { + unsigned char *rodt_ohms; + unsigned char *rtt_nom_ohms; + unsigned char *rtt_nom_table; + unsigned char *rtt_wr_ohms; + unsigned char *dic_ohms; + short *drive_strength; + short *dqx_strength; +}; + +#define RODT_OHMS_COUNT 8 +#define RTT_NOM_OHMS_COUNT 8 +#define RTT_NOM_TABLE_COUNT 8 +#define RTT_WR_OHMS_COUNT 8 +#define DIC_OHMS_COUNT 3 +#define DRIVE_STRENGTH_COUNT 15 + +/* + * Structure that provides DIMM information, either in the form of an SPD + * TWSI address, or a pointer to an array that contains SPD data. One of + * the two fields must be valid. + */ +struct dimm_config { + u16 spd_addrs[2]; /* TWSI address of SPD, 0 if not used */ + u8 *spd_ptrs[2]; /* pointer to SPD data array, NULL if not used */ + int spd_cached[2]; + u8 spd_data[2][SPD_EEPROM_SIZE]; +}; + +struct dimm_odt_config { + u8 odt_ena; /* FIX: dqx_ctl for Octeon 3 DDR4 */ + u64 odt_mask; /* FIX: wodt_mask for Octeon 3 */ + union cvmx_lmcx_modereg_params1 modereg_params1; + union cvmx_lmcx_modereg_params2 modereg_params2; + u8 qs_dic; /* FIX: rodt_ctl for Octeon 3 */ + u64 rodt_ctl; /* FIX: rodt_mask for Octeon 3 */ + u8 dic; +}; + +struct ddr_delay_config { + u32 ddr_board_delay; + u8 lmc_delay_clk; + u8 lmc_delay_cmd; + u8 lmc_delay_dq; +}; + +/* + * The parameters below make up the custom_lmc_config data structure. + * This structure is used to customize the way that the LMC DRAM + * Controller is configured for a particular board design. + * + * The HRM describes LMC Read Leveling which supports automatic + * selection of per byte-lane delays. When measuring the read delays + * the LMC configuration software sweeps through a range of settings + * for LMC0_COMP_CTL2[RODT_CTL], the Octeon II on-die-termination + * resistance and LMC0_MODEREG_PARAMS1[RTT_NOM_XX], the DRAM + * on-die-termination resistance. The minimum and maximum parameters + * for rtt_nom_idx and rodt_ctl listed below determine the ranges of + * ODT settings used for the measurements. Note that for rtt_nom an + * index is used into a sorted table rather than the direct csr setting + * in order to optimize the sweep. + * + * .min_rtt_nom_idx: 1=120ohms, 2=60ohms, 3=40ohms, 4=30ohms, 5=20ohms + * .max_rtt_nom_idx: 1=120ohms, 2=60ohms, 3=40ohms, 4=30ohms, 5=20ohms + * .min_rodt_ctl: 1=20ohms, 2=30ohms, 3=40ohms, 4=60ohms, 5=120ohms + * .max_rodt_ctl: 1=20ohms, 2=30ohms, 3=40ohms, 4=60ohms, 5=120ohms + * + * The settings below control the Octeon II drive strength for the CK, + * ADD/CMD, and DQ/DQS signals. 1=24ohms, 2=26.67ohms, 3=30ohms, + * 4=34.3ohms, 5=40ohms, 6=48ohms, 6=60ohms. + * + * .dqx_ctl: Drive strength control for DDR_DQX/DDR_DQS_X_P/N drivers. + * .ck_ctl: Drive strength control for + * DDR_CK_X_P/DDR_DIMMX_CSX_L/DDR_DIMMX_ODT_X drivers. + * .cmd_ctl: Drive strength control for CMD/A/RESET_L/CKEX drivers. + * + * The LMC controller software selects the most optimal CAS Latency + * that complies with the appropriate SPD values and the frequency + * that the DRAMS are being operated. When operating the DRAMs at + * frequencies substantially lower than their rated frequencies it + * might be necessary to limit the minimum CAS Latency the LMC + * controller software is allowed to select in order to make the DRAM + * work reliably. + * + * .min_cas_latency: Minimum allowed CAS Latency + * + * The value used for LMC0_RLEVEL_CTL[OFFSET_EN] determine how the + * read-leveling information that the Octeon II gathers is interpreted + * to determine the per-byte read delays. + * + * .offset_en: Value used for LMC0_RLEVEL_CTL[OFFSET_EN]. + * .offset_udimm: Value used for LMC0_RLEVEL_CTL[OFFSET] for UDIMMS. + * .offset_rdimm: Value used for LMC0_RLEVEL_CTL[OFFSET] for RDIMMS. + * + * The LMC configuration software sweeps through a range of ODT + * settings while measuring the per-byte read delays. During those + * measurements the software makes an assessment of the quality of the + * measurements in order to determine which measurements provide the + * most accurate delays. The automatic settings provide the option to + * allow that same assessment to determine the most optimal RODT_CTL + * and/or RTT_NOM settings. + * + * The automatic approach might provide the best means to determine + * the settings used for initial poweron of a new design. However, + * the final settings should be determined by board analysis, testing, + * and experience. + * + * .ddr_rtt_nom_auto: 1 means automatically set RTT_NOM value. + * .ddr_rodt_ctl_auto: 1 means automatically set RODT_CTL value. + * + * .rlevel_compute: Enables software interpretation of per-byte read + * delays using the measurements collected by the + * Octeon II rather than completely relying on the + * Octeon II to determine the delays. 1=software + * computation is recomended since a more complete + * analysis is implemented in software. + * + * .rlevel_comp_offset: Set to 2 unless instructed differently by Cavium. + * + * .rlevel_average_loops: Determines the number of times the read-leveling + * sequence is run for each rank. The results is + * then averaged across the number of loops. The + * default setting is 1. + * + * .ddr2t_udimm: + * .ddr2t_rdimm: Turn on the DDR 2T mode. 2-cycle window for CMD and + * address. This mode helps relieve setup time pressure + * on the address and command bus. Please refer to + * Micron's tech note tn_47_01 titled DDR2-533 Memory + * Design Guide for Two Dimm Unbuffered Systems for + * physical details. + * + * .disable_sequential_delay_check: As result of the flyby topology + * prescribed in the JEDEC specifications the byte delays should + * maintain a consistent increasing or decreasing trend across + * the bytes on standard dimms. This setting can be used disable + * that check for unusual circumstances where the check is not + * useful. + * + * .maximum_adjacent_rlevel_delay_increment: An additional sequential + * delay check for the delays that result from the flyby + * topology. This value specifies the maximum difference between + * the delays of adjacent bytes. A value of 0 disables this + * check. + * + * .fprch2 Front Porch Enable: When set, the turn-off + * time for the default DDR_DQ/DQS drivers is FPRCH2 CKs earlier. + * 00 = 0 CKs + * 01 = 1 CKs + * 10 = 2 CKs + * + * .parity: The parity input signal PAR_IN on each dimm must be + * strapped high or low on the board. This bit is programmed + * into LMC0_DIMM_CTL[PARITY] and it must be set to match the + * board strapping. This signal is typically strapped low. + * + * .mode32b: Enable 32-bit datapath mode. Set to 1 if only 32 DQ pins + * are used. (cn61xx, cn71xx) + * + * .measured_vref: Set to 1 to measure VREF; set to 0 to compute VREF. + * + * .dram_connection: Set to 1 if discrete DRAMs; set to 0 if using DIMMs. + * This changes the algorithms used to compute VREF. + * + * .dll_write_offset: FIXME: Add description + * .dll_read_offset: FIXME: Add description + */ + +struct rlevel_table { + const char part[20]; + int speed; + u64 rl_rank[4][4]; +}; + +struct ddr3_custom_config { + u8 min_rtt_nom_idx; + u8 max_rtt_nom_idx; + u8 min_rodt_ctl; + u8 max_rodt_ctl; + u8 dqx_ctl; + u8 ck_ctl; + u8 cmd_ctl; + u8 ctl_ctl; + u8 min_cas_latency; + u8 offset_en; + u8 offset_udimm; + u8 offset_rdimm; + u8 rlevel_compute; + u8 ddr_rtt_nom_auto; + u8 ddr_rodt_ctl_auto; + u8 rlevel_comp_offset_udimm; + u8 rlevel_comp_offset_rdimm; + int8_t ptune_offset; + int8_t ntune_offset; + u8 rlevel_average_loops; + u8 ddr2t_udimm; + u8 ddr2t_rdimm; + u8 disable_sequential_delay_check; + u8 maximum_adjacent_rlevel_delay_increment; + u8 parity; + u8 fprch2; + u8 mode32b; + u8 measured_vref; + u8 dram_connection; + const int8_t *dll_write_offset; + const int8_t *dll_read_offset; + struct rlevel_table *rl_tbl; +}; + +#define DDR_CFG_T_MAX_DIMMS 5 + +struct ddr_conf { + struct dimm_config dimm_config_table[DDR_CFG_T_MAX_DIMMS]; + struct dimm_odt_config odt_1rank_config[4]; + struct dimm_odt_config odt_2rank_config[4]; + struct dimm_odt_config odt_4rank_config[4]; + struct ddr_delay_config unbuffered; + struct ddr_delay_config registered; + struct ddr3_custom_config custom_lmc_config; +}; + +/* Divide and round results to the nearest integer. */ +static inline u64 divide_nint(u64 dividend, u64 divisor) +{ + u64 quotent, remainder; + + quotent = dividend / divisor; + remainder = dividend % divisor; + return (quotent + ((remainder * 2) >= divisor)); +} + +/* Divide and round results up to the next higher integer. */ +static inline u64 divide_roundup(u64 dividend, u64 divisor) +{ + return ((dividend + divisor - 1) / divisor); +} + +enum ddr_type { + DDR3_DRAM = 3, + DDR4_DRAM = 4, +}; + +#define rttnom_none 0 /* Rtt_Nom disabled */ +#define rttnom_60ohm 1 /* RZQ/4 = 240/4 = 60 ohms */ +#define rttnom_120ohm 2 /* RZQ/2 = 240/2 = 120 ohms */ +#define rttnom_40ohm 3 /* RZQ/6 = 240/6 = 40 ohms */ +#define rttnom_20ohm 4 /* RZQ/12 = 240/12 = 20 ohms */ +#define rttnom_30ohm 5 /* RZQ/8 = 240/8 = 30 ohms */ +#define rttnom_rsrv1 6 /* Reserved */ +#define rttnom_rsrv2 7 /* Reserved */ + +#define rttwr_none 0 /* Dynamic ODT off */ +#define rttwr_60ohm 1 /* RZQ/4 = 240/4 = 60 ohms */ +#define rttwr_120ohm 2 /* RZQ/2 = 240/2 = 120 ohms */ +#define rttwr_rsrv1 3 /* Reserved */ + +#define dic_40ohm 0 /* RZQ/6 = 240/6 = 40 ohms */ +#define dic_34ohm 1 /* RZQ/7 = 240/7 = 34 ohms */ + +#define driver_24_ohm 1 +#define driver_27_ohm 2 +#define driver_30_ohm 3 +#define driver_34_ohm 4 +#define driver_40_ohm 5 +#define driver_48_ohm 6 +#define driver_60_ohm 7 + +#define rodt_ctl_none 0 +#define rodt_ctl_20_ohm 1 +#define rodt_ctl_30_ohm 2 +#define rodt_ctl_40_ohm 3 +#define rodt_ctl_60_ohm 4 +#define rodt_ctl_120_ohm 5 + +#define ddr4_rttnom_none 0 /* Rtt_Nom disabled */ +#define ddr4_rttnom_60ohm 1 /* RZQ/4 = 240/4 = 60 ohms */ +#define ddr4_rttnom_120ohm 2 /* RZQ/2 = 240/2 = 120 ohms */ +#define ddr4_rttnom_40ohm 3 /* RZQ/6 = 240/6 = 40 ohms */ +#define ddr4_rttnom_240ohm 4 /* RZQ/1 = 240/1 = 240 ohms */ +#define ddr4_rttnom_48ohm 5 /* RZQ/5 = 240/5 = 48 ohms */ +#define ddr4_rttnom_80ohm 6 /* RZQ/3 = 240/3 = 80 ohms */ +#define ddr4_rttnom_34ohm 7 /* RZQ/7 = 240/7 = 34 ohms */ + +#define ddr4_rttwr_none 0 /* Dynamic ODT off */ +#define ddr4_rttwr_120ohm 1 /* RZQ/2 = 240/2 = 120 ohms */ +#define ddr4_rttwr_240ohm 2 /* RZQ/1 = 240/1 = 240 ohms */ +#define ddr4_rttwr_hiz 3 /* HiZ */ +/* This setting is available for cn78xx pass 2, and cn73xx & cnf75xx pass 1 */ +#define ddr4_rttwr_80ohm 4 /* RZQ/3 = 240/3 = 80 ohms */ + +#define ddr4_dic_34ohm 0 /* RZQ/7 = 240/7 = 34 ohms */ +#define ddr4_dic_48ohm 1 /* RZQ/5 = 240/5 = 48 ohms */ + +#define ddr4_rttpark_none 0 /* Rtt_Park disabled */ +#define ddr4_rttpark_60ohm 1 /* RZQ/4 = 240/4 = 60 ohms */ +#define ddr4_rttpark_120ohm 2 /* RZQ/2 = 240/2 = 120 ohms */ +#define ddr4_rttpark_40ohm 3 /* RZQ/6 = 240/6 = 40 ohms */ +#define ddr4_rttpark_240ohm 4 /* RZQ/1 = 240/1 = 240 ohms */ +#define ddr4_rttpark_48ohm 5 /* RZQ/5 = 240/5 = 48 ohms */ +#define ddr4_rttpark_80ohm 6 /* RZQ/3 = 240/3 = 80 ohms */ +#define ddr4_rttpark_34ohm 7 /* RZQ/7 = 240/7 = 34 ohms */ + +#define ddr4_driver_26_ohm 2 +#define ddr4_driver_30_ohm 3 +#define ddr4_driver_34_ohm 4 +#define ddr4_driver_40_ohm 5 +#define ddr4_driver_48_ohm 6 + +#define ddr4_dqx_driver_24_ohm 1 +#define ddr4_dqx_driver_27_ohm 2 +#define ddr4_dqx_driver_30_ohm 3 +#define ddr4_dqx_driver_34_ohm 4 +#define ddr4_dqx_driver_40_ohm 5 +#define ddr4_dqx_driver_48_ohm 6 +#define ddr4_dqx_driver_60_ohm 7 + +#define ddr4_rodt_ctl_none 0 +#define ddr4_rodt_ctl_40_ohm 1 +#define ddr4_rodt_ctl_60_ohm 2 +#define ddr4_rodt_ctl_80_ohm 3 +#define ddr4_rodt_ctl_120_ohm 4 +#define ddr4_rodt_ctl_240_ohm 5 +#define ddr4_rodt_ctl_34_ohm 6 +#define ddr4_rodt_ctl_48_ohm 7 + +#define DIMM_CONFIG_TERMINATOR { {0, 0}, {NULL, NULL} } + +#define SET_DDR_DLL_CTL3(field, expr) \ + do { \ + if (octeon_is_cpuid(OCTEON_CN66XX) || \ + octeon_is_cpuid(OCTEON_CN63XX)) \ + ddr_dll_ctl3.cn63xx.field = (expr); \ + else if (octeon_is_cpuid(OCTEON_CN68XX) || \ + octeon_is_cpuid(OCTEON_CN61XX) || \ + octeon_is_cpuid(OCTEON_CNF71XX)) \ + ddr_dll_ctl3.cn61xx.field = (expr); \ + else if (octeon_is_cpuid(OCTEON_CN70XX) || \ + octeon_is_cpuid(OCTEON_CN78XX)) \ + ddr_dll_ctl3.cn70xx.field = (expr); \ + else if (octeon_is_cpuid(OCTEON_CN73XX) || \ + octeon_is_cpuid(OCTEON_CNF75XX)) \ + ddr_dll_ctl3.cn73xx.field = (expr); \ + else \ + debug("%s(): " #field \ + "not set for unknown chip\n", \ + __func__); \ + } while (0) + +#define ENCODE_DLL90_BYTE_SEL(byte_sel) \ + (octeon_is_cpuid(OCTEON_CN70XX) ? ((9 + 7 - (byte_sel)) % 9) : \ + ((byte_sel) + 1)) + +/** + * If debugging is disabled the ddr_print macro is not compatible + * with this macro. + */ +# define GET_DDR_DLL_CTL3(field) \ + ((octeon_is_cpuid(OCTEON_CN66XX) || \ + octeon_is_cpuid(OCTEON_CN63XX)) ? \ + ddr_dll_ctl3.cn63xx.field : \ + (octeon_is_cpuid(OCTEON_CN68XX) || \ + octeon_is_cpuid(OCTEON_CN61XX) || \ + octeon_is_cpuid(OCTEON_CNF71XX)) ? \ + ddr_dll_ctl3.cn61xx.field : \ + (octeon_is_cpuid(OCTEON_CN70XX) || \ + octeon_is_cpuid(OCTEON_CN78XX)) ? \ + ddr_dll_ctl3.cn70xx.field : \ + (octeon_is_cpuid(OCTEON_CN73XX) || \ + octeon_is_cpuid(OCTEON_CNF75XX)) ? \ + ddr_dll_ctl3.cn73xx.field : 0) + +extern const char *ddr3_dimm_types[]; +extern const char *ddr4_dimm_types[]; + +extern const struct dimm_odt_config disable_odt_config[]; + +#define RLEVEL_BYTE_BITS 6 +#define RLEVEL_BYTE_MSK ((1ULL << 6) - 1) + +/* Prototypes */ +int get_ddr_type(struct dimm_config *dimm_config, int upper_dimm); +int get_dimm_module_type(struct dimm_config *dimm_config, int upper_dimm, + int ddr_type); +int read_spd(struct dimm_config *dimm_config, int dimm_index, int spd_field); +int read_spd_init(struct dimm_config *dimm_config, int dimm_index); +void report_dimm(struct dimm_config *dimm_config, int upper_dimm, + int dimm, int if_num); +int validate_dimm(struct ddr_priv *priv, struct dimm_config *dimm_config, + int dimm_index); +char *printable_rank_spec(char *buffer, int num_ranks, int dram_width, + int spd_package); + +bool ddr_memory_preserved(struct ddr_priv *priv); + +int get_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte); +int get_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, int byte); +void upd_wl_rank(union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte, + int delay); +void upd_rl_rank(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, int byte, + int delay); + +int compute_ddr3_rlevel_delay(u8 mstart, u8 width, + union cvmx_lmcx_rlevel_ctl rlevel_ctl); + +int encode_row_lsb_ddr3(int row_lsb); +int encode_pbank_lsb_ddr3(int pbank_lsb); + +int initialize_ddr_clock(struct ddr_priv *priv, struct ddr_conf *ddr_conf, + u32 cpu_hertz, u32 ddr_hertz, u32 ddr_ref_hertz, + int if_num, u32 if_mask); + +void process_custom_dll_offsets(struct ddr_priv *priv, int if_num, + const char *enable_str, + const int8_t *offsets, const char *byte_str, + int mode); +int nonseq_del(struct rlevel_byte_data *rlevel_byte, int start, int end, + int max_adj_delay_inc); +int roundup_ddr3_wlevel_bitmask(int bitmask); + +void oct3_ddr3_seq(struct ddr_priv *priv, int rank_mask, int if_num, + int sequence); +void ddr_init_seq(struct ddr_priv *priv, int rank_mask, int if_num); + +void rlevel_to_wlevel(union cvmx_lmcx_rlevel_rankx *lmc_rlevel_rank, + union cvmx_lmcx_wlevel_rankx *lmc_wlevel_rank, int byte); + +int validate_ddr3_rlevel_bitmask(struct rlevel_bitmask *rlevel_bitmask_p, + int ddr_type); + +void change_dll_offset_enable(struct ddr_priv *priv, int if_num, int change); +unsigned short load_dll_offset(struct ddr_priv *priv, int if_num, + int dll_offset_mode, + int byte_offset, int byte); + +u64 lmc_ddr3_rl_dbg_read(struct ddr_priv *priv, int if_num, int idx); +u64 lmc_ddr3_wl_dbg_read(struct ddr_priv *priv, int if_num, int idx); + +void cvmx_maybe_tune_node(struct ddr_priv *priv, u32 ddr_speed); +void cvmx_dbi_switchover(struct ddr_priv *priv); + +int init_octeon3_ddr3_interface(struct ddr_priv *priv, + struct ddr_conf *ddr_conf, + u32 ddr_hertz, u32 cpu_hertz, u32 ddr_ref_hertz, + int if_num, u32 if_mask); + +char *lookup_env(struct ddr_priv *priv, const char *format, ...); +char *lookup_env_ull(struct ddr_priv *priv, const char *format, ...); + +/* Each board provides a board-specific config table via this function */ +struct ddr_conf *octeon_ddr_conf_table_get(int *count, int *def_ddr_freq); + +#endif /* __OCTEON_DDR_H_ */