doc: rockchip: Add doc for rk3399 TPL build/flash
This patch add documentation for TPL build and flashing steps for rk3399 boards. Add full boot log for future reference. Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
parent
f7cd37ff1c
commit
051c755075
@ -173,7 +173,10 @@ For example:
|
||||
=> make u-boot.itb
|
||||
|
||||
(Get spl/u-boot-spl-dtb.bin, u-boot.itb images and some boards would get
|
||||
spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL)
|
||||
spl/u-boot-spl.bin since it doesn't enable CONFIG_SPL_OF_CONTROL
|
||||
|
||||
If TPL enabled on the target, get tpl/u-boot-tpl-dtb.bin or tpl/u-boot-tpl.bin
|
||||
if CONFIG_TPL_OF_CONTROL not enabled)
|
||||
|
||||
Writing to the board with USB
|
||||
=============================
|
||||
@ -455,6 +458,52 @@ Net: eth0: ethernet@fe300000
|
||||
Hit any key to stop autoboot: 0
|
||||
=>
|
||||
|
||||
Option 3: Package the image with TPL:
|
||||
|
||||
- Prefix rk3399 header to TPL image
|
||||
|
||||
=> cd /path/to/u-boot
|
||||
=> ./tools/mkimage -n rk3399 -T rksd -d tpl/u-boot-tpl-dtb.bin out
|
||||
|
||||
- Concatinate tpl with spl
|
||||
|
||||
=> cd /path/to/u-boot
|
||||
=> cat ./spl/u-boot-spl-dtb.bin >> out
|
||||
|
||||
- Write tpl+spl at 64th sector
|
||||
|
||||
=> sudo dd if=out of=/dev/sdc seek=64
|
||||
|
||||
- Write U-Boot proper at 16384 sector
|
||||
|
||||
=> sudo dd if=u-boot.itb of=/dev/sdc seek=16384
|
||||
=> sync
|
||||
|
||||
Put this SD (or micro-SD) card into your board and reset it. You should see
|
||||
something like:
|
||||
|
||||
U-Boot TPL board init
|
||||
Trying to boot from BOOTROM
|
||||
Returning to boot ROM...
|
||||
|
||||
U-Boot SPL board init
|
||||
Trying to boot from MMC1
|
||||
|
||||
|
||||
U-Boot 2019.07-rc1-00241-g5b3244767a (May 08 2019 - 10:51:06 +0530)
|
||||
|
||||
Model: Orange Pi RK3399 Board
|
||||
DRAM: 2 GiB
|
||||
MMC: dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0
|
||||
Loading Environment from MMC... OK
|
||||
In: serial@ff1a0000
|
||||
Out: serial@ff1a0000
|
||||
Err: serial@ff1a0000
|
||||
Model: Orange Pi RK3399 Board
|
||||
Net: eth0: ethernet@fe300000
|
||||
Hit any key to stop autoboot: 0
|
||||
=>
|
||||
|
||||
Using fastboot on rk3288
|
||||
========================
|
||||
- Write GPT partition layout to mmc device which fastboot want to use it to
|
||||
|
Loading…
Reference in New Issue
Block a user