diff --git a/board/freescale/common/i2c_common.c b/board/freescale/common/i2c_common.c index 0f09ed7d34..119ed3c617 100644 --- a/board/freescale/common/i2c_common.c +++ b/board/freescale/common/i2c_common.c @@ -9,7 +9,7 @@ #include #include "i2c_common.h" -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) /* If DM is in use, retrieve the chip for the specified bus number */ int fsl_i2c_get_device(int address, int bus, DEVICE_HANDLE_T *dev) diff --git a/board/freescale/common/i2c_common.h b/board/freescale/common/i2c_common.h index 840ad66183..77a7b6aedd 100644 --- a/board/freescale/common/i2c_common.h +++ b/board/freescale/common/i2c_common.h @@ -9,7 +9,7 @@ #define __NXP_I2C_COMMON_H__ /* Common functionality shared by the I2C drivers for VID and the mux. */ -#ifdef CONFIG_DM_I2C +#if CONFIG_IS_ENABLED(DM_I2C) #define DEVICE_HANDLE_T struct udevice * #define I2C_READ(dev, register, data, length) \ diff --git a/drivers/misc/gsc.c b/drivers/misc/gsc.c index ec24ca807b..65c9c2c6ce 100644 --- a/drivers/misc/gsc.c +++ b/drivers/misc/gsc.c @@ -77,7 +77,7 @@ enum { GSC_SC_RST_CAUSE_MAX = 10, }; -#if (IS_ENABLED(CONFIG_DM_I2C)) +#if CONFIG_IS_ENABLED(DM_I2C) struct gsc_priv { int gscver; diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 33fa568221..37d3f82dbd 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -3,30 +3,15 @@ # (C) Copyright 2006-2009 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. -ifdef CONFIG_SPL_BUILD - -ifeq ($(CONFIG_$(SPL_TPL_)BUILD)$(CONFIG_$(SPL_TPL_)DM_SERIAL),yy) +ifeq ($(CONFIG_$(SPL_TPL_)DM_SERIAL),y) obj-y += serial-uclass.o else obj-y += serial.o endif -else - -ifdef CONFIG_DM_SERIAL -obj-y += serial-uclass.o -else -obj-y += serial.o -endif - -endif - -ifdef CONFIG_DM_SERIAL obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o -else obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o obj-$(CONFIG_$(SPL_)SYS_NS16550_SERIAL) += serial_ns16550.o -endif obj-$(CONFIG_ALTERA_UART) += altera_uart.o obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c index 9d97bc8654..9853f49c94 100644 --- a/drivers/serial/atmel_usart.c +++ b/drivers/serial/atmel_usart.c @@ -18,7 +18,7 @@ #include #include -#ifdef CONFIG_DM_SERIAL +#if CONFIG_IS_ENABLED(DM_SERIAL) #include #endif #include @@ -28,7 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_DM_SERIAL +#if !CONFIG_IS_ENABLED(DM_SERIAL) static void atmel_serial_setbrg_internal(atmel_usart3_t *usart, int id, int baudrate) { @@ -133,9 +133,7 @@ __weak struct serial_device *default_serial_console(void) { return &atmel_serial_drv; } -#endif - -#ifdef CONFIG_DM_SERIAL +#else enum serial_clk_type { CLK_TYPE_NORMAL = 0, CLK_TYPE_DBGU, diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index c02106747a..7240d763d1 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -407,7 +407,7 @@ void serial_stdio_init(void) { } -#if defined(CONFIG_DM_STDIO) +#if CONFIG_IS_ENABLED(DM_STDIO) #if CONFIG_IS_ENABLED(SERIAL_PRESENT) static void serial_stub_putc(struct stdio_dev *sdev, const char ch) @@ -505,7 +505,7 @@ U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); static int serial_post_probe(struct udevice *dev) { struct dm_serial_ops *ops = serial_get_ops(dev); -#ifdef CONFIG_DM_STDIO +#if CONFIG_IS_ENABLED(DM_STDIO) struct serial_dev_priv *upriv = dev_get_uclass_priv(dev); struct stdio_dev sdev; #endif @@ -540,7 +540,7 @@ static int serial_post_probe(struct udevice *dev) return ret; } -#ifdef CONFIG_DM_STDIO +#if CONFIG_IS_ENABLED(DM_STDIO) if (!(gd->flags & GD_FLG_RELOC)) return 0; memset(&sdev, '\0', sizeof(sdev)); diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c index 6fb4cb65c2..ded7346a13 100644 --- a/drivers/serial/serial_mtk.c +++ b/drivers/serial/serial_mtk.c @@ -173,8 +173,7 @@ static int _mtk_serial_pending(struct mtk_serial_priv *priv, bool input) return (readl(&priv->regs->lsr) & UART_LSR_THRE) ? 0 : 1; } -#if defined(CONFIG_DM_SERIAL) && \ - (!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_DM)) +#if CONFIG_IS_ENABLED(DM_SERIAL) static int mtk_serial_setbrg(struct udevice *dev, int baudrate) { struct mtk_serial_priv *priv = dev_get_priv(dev); diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c index 7449e9b904..f5468353e1 100644 --- a/drivers/serial/serial_pl01x.c +++ b/drivers/serial/serial_pl01x.c @@ -27,8 +27,7 @@ DECLARE_GLOBAL_DATA_PTR; -#ifndef CONFIG_DM_SERIAL - +#if !CONFIG_IS_ENABLED(DM_SERIAL) static volatile unsigned char *const port[] = CFG_PL01x_PORTS; static enum pl01x_type pl01x_type __section(".data"); static struct pl01x_regs *base_regs __section(".data"); @@ -186,7 +185,7 @@ static int pl01x_generic_setbrg(struct pl01x_regs *regs, enum pl01x_type type, return 0; } -#ifndef CONFIG_DM_SERIAL +#if !CONFIG_IS_ENABLED(DM_SERIAL) static void pl01x_serial_init_baud(int baudrate) { int clock = 0; @@ -273,11 +272,7 @@ __weak struct serial_device *default_serial_console(void) { return &pl01x_serial_drv; } - -#endif /* nCONFIG_DM_SERIAL */ - -#ifdef CONFIG_DM_SERIAL - +#else int pl01x_serial_setbrg(struct udevice *dev, int baudrate) { struct pl01x_serial_plat *plat = dev_get_plat(dev); diff --git a/drivers/serial/serial_pl01x_internal.h b/drivers/serial/serial_pl01x_internal.h index dfd95a0b77..71c52bb531 100644 --- a/drivers/serial/serial_pl01x_internal.h +++ b/drivers/serial/serial_pl01x_internal.h @@ -38,7 +38,7 @@ struct pl01x_regs { u32 pl011_cr; /* 0x30 Control register */ }; -#ifdef CONFIG_DM_SERIAL +#if CONFIG_IS_ENABLED(DM_SERIAL) int pl01x_serial_of_to_plat(struct udevice *dev); int pl01x_serial_probe(struct udevice *dev); diff --git a/include/config_uncmd_spl.h b/include/config_uncmd_spl.h deleted file mode 100644 index a59b9bbafb..0000000000 --- a/include/config_uncmd_spl.h +++ /dev/null @@ -1,21 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2012 - * Ilya Yanok, ilya.yanok@gmail.com - */ - -#ifndef __CONFIG_UNCMD_SPL_H__ -#define __CONFIG_UNCMD_SPL_H__ - -#ifdef CONFIG_SPL_BUILD -/* SPL needs only BOOTP + TFTP so undefine other stuff to save space */ - -#ifndef CONFIG_SPL_DM -#undef CONFIG_DM_SERIAL -#undef CONFIG_DM_I2C -#endif - -#undef CONFIG_DM_STDIO - -#endif /* CONFIG_SPL_BUILD */ -#endif /* __CONFIG_UNCMD_SPL_H__ */ diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 60fea59dee..e7ae18ec5f 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -314,7 +314,7 @@ * shorted - index 1 * Retain non-DM serial port for debug purposes. */ -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_CLK (get_bus_freq(0) / 2) #define CFG_SYS_NS16550_COM1 (CFG_SYS_CCSRBAR + 0x11C500) #endif diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index fa275d61d1..3dfcb138b4 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -33,7 +33,7 @@ * NS16550 Configuration */ #define CFG_SYS_NS16550_CLK CFG_SYS_TCLK -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index eae107fe5e..8032abe769 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -23,7 +23,7 @@ #else #define CFG_SYS_NS16550_CLK 24000000 #endif -#ifndef CONFIG_DM_SERIAL +#if !CONFIG_IS_ENABLED(DM_SERIAL) # define CFG_SYS_NS16550_COM1 SUNXI_UART0_BASE # define CFG_SYS_NS16550_COM2 SUNXI_UART1_BASE # define CFG_SYS_NS16550_COM3 SUNXI_UART2_BASE diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h index 49f4263e16..9e312ac16d 100644 --- a/include/configs/ti_omap4_common.h +++ b/include/configs/ti_omap4_common.h @@ -28,7 +28,7 @@ * Hardware drivers */ #define CFG_SYS_NS16550_CLK 48000000 -#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM3 UART3_BASE #endif diff --git a/include/configs/x530.h b/include/configs/x530.h index fddf00d3d1..e1678e79e4 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -14,7 +14,7 @@ * NS16550 Configuration */ #define CFG_SYS_NS16550_CLK CFG_SYS_TCLK -#if !defined(CONFIG_DM_SERIAL) +#if !CONFIG_IS_ENABLED(DM_SERIAL) #define CFG_SYS_NS16550_COM1 MV_UART_CONSOLE_BASE #endif diff --git a/include/ns16550.h b/include/ns16550.h index 0ee5c4d6de..f45fc8cecc 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -26,7 +26,7 @@ #include -#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_SYS_NS16550_REG_SIZE) +#if CONFIG_IS_ENABLED(DM_SERIAL) && !defined(CONFIG_SYS_NS16550_REG_SIZE) /* * For driver model we always use one byte per register, and sort out the * differences in the driver @@ -37,10 +37,10 @@ #ifdef CONFIG_NS16550_DYNAMIC #define UART_REG(x) unsigned char x #else -#if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) -#error "Please define NS16550 registers size." -#elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_DM_SERIAL) +#if defined(CONFIG_SYS_NS16550_MEM32) && !CONFIG_IS_ENABLED(DM_SERIAL) #define UART_REG(x) u32 x +#elif !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0) +#error "Please define NS16550 registers size." #elif (CONFIG_SYS_NS16550_REG_SIZE > 0) #define UART_REG(x) \ unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \ @@ -113,7 +113,7 @@ struct ns16550 { UART_REG(scr); /* 10*/ UART_REG(ssr); /* 11*/ #endif -#ifdef CONFIG_DM_SERIAL +#if CONFIG_IS_ENABLED(DM_SERIAL) struct ns16550_plat *plat; #endif }; diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index f5f5e4a4d5..0ade91642a 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -113,7 +113,6 @@ vpl/include/autoconf.mk: vpl/u-boot.cfg define filechk_config_h (echo "/* Automatically generated - do not edit */"; \ echo \#define CFG_BOARDDIR board/$(if $(VENDOR),$(VENDOR)/)$(BOARD);\ - echo \#include \; \ echo \#include \; \ echo \#include \; \ echo \#include \; \ diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 3b8c9d8c31..97dd4a64f6 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -48,7 +48,6 @@ subdir-ccflags-y := # Modified for U-Boot -include include/config/auto.conf -include $(prefix)/include/autoconf.mk -include scripts/Makefile.uncmd_spl include scripts/Kbuild.include diff --git a/scripts/Makefile.uncmd_spl b/scripts/Makefile.uncmd_spl deleted file mode 100644 index 6ea097d36d..0000000000 --- a/scripts/Makefile.uncmd_spl +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# Makefile version of include/config_uncmd_spl.h -# TODO: Invent a better way - -ifdef CONFIG_SPL_BUILD - -ifndef CONFIG_SPL_DM -CONFIG_DM_SERIAL= -CONFIG_DM_I2C= -CONFIG_DM_SPI= -CONFIG_DM_SPI_FLASH= -endif - -endif