board: stm32: Add Engicam MicroGEA STM32MP1 MicroDev 2.0 7" OF
7" OF is a capacitive touch 7" Open Frame panel solutions with
- 7" AUO B101AW03 LVDS panel
- EDT, FT5526 Touch
MicroGEA STM32MP1 is a STM32MP157A based Micro SoM.
MicroDev 2.0 is a general purpose miniature carrier board with CAN,
LTE and LVDS panel interfaces.
MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0
7" Open Frame Solution board.
Linux dts commit details:
commit <1d278204cbaa> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")
Add support for it.
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
This commit is contained in:
Jagan Teki
Patrice Chotard
parent
fd4dc09a4c
commit
0441b48570
@ -992,6 +992,7 @@ dtb-$(CONFIG_STM32MP15x) += \
|
||||
stm32mp157a-icore-stm32mp1-ctouch2.dtb \
|
||||
stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
|
||||
stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
|
||||
stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
|
||||
stm32mp157c-dk2.dtb \
|
||||
stm32mp157c-ed1.dtb \
|
||||
stm32mp157c-ev1.dtb \
|
||||
|
||||
@ -0,0 +1,51 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (C) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Copyright (c) 2020 Amarula Solutions(India)
|
||||
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
||||
*/
|
||||
|
||||
#include "stm32mp157a-microgea-stm32mp1-u-boot.dtsi"
|
||||
|
||||
/{
|
||||
aliases {
|
||||
mmc0 = &sdmmc1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart4;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&sdmmc1_b4_pins_a {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
pins1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
pins2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
&uart4_pins_a {
|
||||
u-boot,dm-pre-reloc;
|
||||
|
||||
pins1 {
|
||||
u-boot,dm-pre-reloc;
|
||||
};
|
||||
|
||||
pins2 {
|
||||
u-boot,dm-pre-reloc;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
154
arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
Normal file
154
arch/arm/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
Normal file
@ -0,0 +1,154 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
|
||||
/*
|
||||
* Copyright (c) STMicroelectronics 2019 - All Rights Reserved
|
||||
* Copyright (c) 2020 Engicam srl
|
||||
* Copyright (c) 2020 Amarula Solutons(India)
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "stm32mp157.dtsi"
|
||||
#include "stm32mp157a-microgea-stm32mp1.dtsi"
|
||||
#include "stm32mp15-pinctrl.dtsi"
|
||||
#include "stm32mp15xxaa-pinctrl.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Engicam MicroGEA STM32MP1 MicroDev 2.0 7\" Open Frame";
|
||||
compatible = "engicam,microgea-stm32mp1-microdev2.0-of7",
|
||||
"engicam,microgea-stm32mp1", "st,stm32mp157";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart4;
|
||||
serial1 = &uart8;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "gpio-backlight";
|
||||
gpios = <&gpiod 13 GPIO_ACTIVE_HIGH>;
|
||||
default-on;
|
||||
};
|
||||
|
||||
lcd_3v3: regulator-lcd-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lcd_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpiof 10 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
power-supply = <&panel_pwr>;
|
||||
};
|
||||
|
||||
panel_pwr: regulator-panel-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "panel_pwr";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpiob 10 GPIO_ACTIVE_HIGH>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
panel {
|
||||
compatible = "auo,b101aw03";
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&lcd_3v3>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <<dc_ep0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
i2c-scl-rising-time-ns = <185>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&i2c2_pins_a>;
|
||||
pinctrl-1 = <&i2c2_sleep_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
<dc {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <<dc_pins>;
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
ltdc_ep0_out: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
ltdc_pins: ltdc {
|
||||
pins {
|
||||
pinmux = <STM32_PINMUX('G', 10, AF14)>, /* LTDC_B2 */
|
||||
<STM32_PINMUX('H', 12, AF14)>, /* LTDC_R6 */
|
||||
<STM32_PINMUX('H', 11, AF14)>, /* LTDC_R5 */
|
||||
<STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
|
||||
<STM32_PINMUX('D', 9, AF14)>, /* LTDC_B0 */
|
||||
<STM32_PINMUX('E', 5, AF14)>, /* LTDC_G0 */
|
||||
<STM32_PINMUX('E', 6, AF14)>, /* LTDC_G1 */
|
||||
<STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
|
||||
<STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
|
||||
<STM32_PINMUX('G', 7, AF14)>, /* LTDC_CLK */
|
||||
<STM32_PINMUX('G', 12, AF14)>, /* LTDC_B1 */
|
||||
<STM32_PINMUX('H', 2, AF14)>, /* LTDC_R0 */
|
||||
<STM32_PINMUX('H', 3, AF14)>, /* LTDC_R1 */
|
||||
<STM32_PINMUX('H', 8, AF14)>, /* LTDC_R2 */
|
||||
<STM32_PINMUX('H', 9, AF14)>, /* LTDC_R3 */
|
||||
<STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
|
||||
<STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
|
||||
<STM32_PINMUX('H', 14, AF14)>, /* LTDC_G3 */
|
||||
<STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
|
||||
<STM32_PINMUX('I', 0, AF14)>, /* LTDC_G5 */
|
||||
<STM32_PINMUX('I', 1, AF14)>, /* LTDC_G6 */
|
||||
<STM32_PINMUX('I', 2, AF14)>, /* LTDC_G7 */
|
||||
<STM32_PINMUX('I', 4, AF14)>, /* LTDC_B4 */
|
||||
<STM32_PINMUX('I', 5, AF14)>, /* LTDC_B5 */
|
||||
<STM32_PINMUX('B', 8, AF14)>, /* LTDC_B6 */
|
||||
<STM32_PINMUX('I', 7, AF14)>, /* LTDC_B7 */
|
||||
<STM32_PINMUX('I', 9, AF14)>, /* LTDC_VSYNC */
|
||||
<STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
slew-rate = <3>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc1 {
|
||||
bus-width = <4>;
|
||||
disable-wp;
|
||||
pinctrl-names = "default", "opendrain", "sleep";
|
||||
pinctrl-0 = <&sdmmc1_b4_pins_a>;
|
||||
pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
|
||||
pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
|
||||
st,neg-edge;
|
||||
vmmc-supply = <&vdd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default", "sleep", "idle";
|
||||
pinctrl-0 = <&uart4_pins_a>;
|
||||
pinctrl-1 = <&uart4_sleep_pins_a>;
|
||||
pinctrl-2 = <&uart4_idle_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* J31: RS323 */
|
||||
&uart8 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart8_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -97,6 +97,13 @@ config TARGET_MICROGEA_STM32MP1
|
||||
* MicroGEA STM32MP1 needs to mount on top of this MicroDev 2.0 board
|
||||
for creating complete MicroGEA STM32MP1 MicroDev 2.0 Carrier board.
|
||||
|
||||
MicroGEA STM32MP1 MicroDev 2.0 7" OF:
|
||||
* 7" OF is a capacitive touch 7" Open Frame panel solutions with LVDS
|
||||
panel and toucscreen.
|
||||
* MicroGEA STM32MP1 needs to mount on top of MicroDev 2.0 board with
|
||||
pluged 7" OF for creating complete MicroGEA STM32MP1 MicroDev 2.0 7"
|
||||
Open Frame Solution board.
|
||||
|
||||
config TARGET_ICORE_STM32MP1
|
||||
bool "Engicam i.Core STM32MP1 SOM"
|
||||
select STM32MP15x
|
||||
|
||||
@ -5,6 +5,12 @@ S: Maintained
|
||||
F: arch/arm/dts/stm32mp15*microgea*
|
||||
F: configs/stm32mp15-microgea-stm32mp1-microdev2_defconfig
|
||||
|
||||
MicroGEA-STM32MP1-MICRODEV2.0-OF7
|
||||
M: Jagan Teki <jagan@amarulasolutions.com>
|
||||
M: Matteo Lisi <matteo.lisi@engicam.com>
|
||||
S: Maintained
|
||||
F: configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
|
||||
|
||||
i.Core-STM32MP1-CTOUCH2.0
|
||||
M: Jagan Teki <jagan@amarulasolutions.com>
|
||||
M: Matteo Lisi <matteo.lisi@engicam.com>
|
||||
|
||||
79
configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
Normal file
79
configs/stm32mp15-microgea-stm32mp1-microdev2-of7_defconfig
Normal file
@ -0,0 +1,79 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_STM32MP=y
|
||||
CONFIG_SYS_MALLOC_F_LEN=0x3000
|
||||
CONFIG_SYS_MEMTEST_START=0xc0000000
|
||||
CONFIG_SYS_MEMTEST_END=0xc4000000
|
||||
CONFIG_ENV_OFFSET=0x280000
|
||||
CONFIG_SPL_TEXT_BASE=0x2FFC2500
|
||||
CONFIG_SPL_MMC_SUPPORT=y
|
||||
CONFIG_SPL=y
|
||||
CONFIG_TARGET_MICROGEA_STM32MP1=y
|
||||
CONFIG_ENV_OFFSET_REDUND=0x2C0000
|
||||
# CONFIG_ARMV7_VIRT is not set
|
||||
CONFIG_DEFAULT_DEVICE_TREE="stm32mp157a-microgea-stm32mp1-microdev2.0-of7"
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
CONFIG_FIT=y
|
||||
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
|
||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
|
||||
CONFIG_SPL_ENV_SUPPORT=y
|
||||
CONFIG_SPL_I2C_SUPPORT=y
|
||||
CONFIG_SPL_POWER_SUPPORT=y
|
||||
CONFIG_SYS_PROMPT="STM32MP> "
|
||||
CONFIG_CMD_ADTIMG=y
|
||||
CONFIG_CMD_ERASEENV=y
|
||||
CONFIG_CMD_MEMINFO=y
|
||||
CONFIG_CMD_MEMTEST=y
|
||||
CONFIG_CMD_ADC=y
|
||||
CONFIG_CMD_CLK=y
|
||||
CONFIG_CMD_FUSE=y
|
||||
CONFIG_CMD_GPIO=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_REMOTEPROC=y
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_CMD_TIME=y
|
||||
CONFIG_CMD_TIMER=y
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_CMD_EXT4_WRITE=y
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
|
||||
CONFIG_ENV_IS_NOWHERE=y
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
|
||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||
# CONFIG_SPL_ENV_IS_NOWHERE is not set
|
||||
CONFIG_DM_HWSPINLOCK=y
|
||||
CONFIG_HWSPINLOCK_STM32=y
|
||||
CONFIG_DM_I2C=y
|
||||
CONFIG_SYS_I2C_STM32F7=y
|
||||
CONFIG_LED=y
|
||||
CONFIG_LED_GPIO=y
|
||||
CONFIG_DM_MAILBOX=y
|
||||
CONFIG_STM32_IPCC=y
|
||||
CONFIG_STM32_FMC2_EBI=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_SUPPORT_EMMC_BOOT=y
|
||||
CONFIG_STM32_SDMMC2=y
|
||||
CONFIG_PHY_REALTEK=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_DWC_ETH_QOS=y
|
||||
CONFIG_PHY=y
|
||||
CONFIG_PINCONF=y
|
||||
# CONFIG_SPL_PINCTRL_FULL is not set
|
||||
CONFIG_PINCTRL_STMFX=y
|
||||
CONFIG_DM_PMIC=y
|
||||
# CONFIG_SPL_PMIC_CHILDREN is not set
|
||||
CONFIG_PMIC_STPMIC1=y
|
||||
CONFIG_DM_REGULATOR=y
|
||||
CONFIG_DM_REGULATOR_FIXED=y
|
||||
CONFIG_DM_REGULATOR_GPIO=y
|
||||
CONFIG_REMOTEPROC_STM32_COPRO=y
|
||||
CONFIG_DM_RTC=y
|
||||
CONFIG_RTC_STM32=y
|
||||
CONFIG_SERIAL_RX_BUFFER=y
|
||||
CONFIG_WDT=y
|
||||
CONFIG_WDT_STM32MP=y
|
||||
CONFIG_LZO=y
|
||||
CONFIG_ERRNO_STR=y
|
||||
Loading…
Reference in New Issue
Block a user