serial: Remove CONFIG_SERIAL_MULTI from remaining sources

Remove the parts depending either on disabled CONFIG_SERIAL_MULTI
or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI
is now enabled by default.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

arch/arm/lib/board.c

@@ -492,9 +492,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 #ifdef CONFIG_CLOCKS
 	set_cpu_clk_info(); /* Setup clock information */
 #endif
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 

arch/blackfin/lib/board.c

@@ -284,9 +284,7 @@ void board_init_f(ulong bootflag)
 	init_baudrate();
 	serial_early_puts("Serial init\n");
 	serial_init();
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 	serial_early_puts("Console init flash\n");
 	console_init_f();
 	serial_early_puts("End of early debugging\n");

arch/m68k/lib/board.c

@@ -401,9 +401,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 

arch/microblaze/lib/board.c

@@ -108,9 +108,7 @@ void board_init_f(ulong not_used)
 	 */
 	mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
 		WATCHDOG_RESET ();

arch/nds32/lib/board.c

@@ -324,9 +324,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 

arch/powerpc/lib/board.c

@@ -672,9 +672,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 	gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE;
 #endif
 
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 	debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 

arch/sandbox/lib/board.c

@@ -220,9 +220,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
 
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize();
-#endif
 
 #ifdef CONFIG_POST
 	post_output_backlog();

arch/x86/lib/board.c

@@ -150,9 +150,7 @@ init_fnc_t *init_sequence_r[] = {
 	timer_init,
 	display_banner,
 	display_dram_config,
-#ifdef CONFIG_SERIAL_MULTI
 	serial_initialize_r,
-#endif
 #ifndef CONFIG_SYS_NO_FLASH
 	flash_init_r,
 #endif

common/cmd_nvedit.c

@@ -239,10 +239,8 @@ int env_check_apply(const char *name, const char *oldval,
 		if (console_assign(console, newval) < 0)
 			return 1;
 
-#ifdef CONFIG_SERIAL_MULTI
 		if (serial_assign(newval) < 0)
 			return 1;
-#endif
 #endif /* CONFIG_CONSOLE_MUX */
 	}
 

common/fdt_support.c

@@ -94,7 +94,7 @@ int fdt_find_and_setprop(void *fdt, const char *node, const char *prop,
 
 #ifdef CONFIG_OF_STDOUT_VIA_ALIAS
 
-#ifdef CONFIG_SERIAL_MULTI
+#ifdef CONFIG_CONS_INDEX
 static void fdt_fill_multisername(char *sername, size_t maxlen)
 {
 	const char *outname = stdio_devices[stdout]->name;
@@ -106,9 +106,7 @@ static void fdt_fill_multisername(char *sername, size_t maxlen)
 	if (strcmp(outname + 1, "serial") > 0)
 		strncpy(sername, outname + 1, maxlen);
 }
-#else
-static inline void fdt_fill_multisername(char *sername, size_t maxlen) {}
-#endif /* CONFIG_SERIAL_MULTI */
+#endif
 
 static int fdt_fixup_stdout(void *fdt, int chosenoff)
 {

common/iomux.c

@@ -135,7 +135,6 @@ int iomux_doenv(const int console, const char *arg)
 		 */
 		if (console_assign(console, start[j]) < 0)
 			continue;
-#ifdef CONFIG_SERIAL_MULTI
 		/*
 		 * This was taken from common/cmd_nvedit.c.
 		 * This will never work because serial_assign() returns
@@ -146,7 +145,6 @@ int iomux_doenv(const int console, const char *arg)
 		 */
 		if (serial_assign(start[j]) < 0)
 			continue;
-#endif
 		cons_set[cs_idx++] = dev;
 	}
 	free(console_args);

common/stdio.c

@@ -227,9 +227,7 @@ int stdio_init (void)
 	drv_logbuff_init ();
 #endif
 	drv_system_init ();
-#ifdef CONFIG_SERIAL_MULTI
 	serial_stdio_init ();
-#endif
 #ifdef CONFIG_USB_TTY
 	drv_usbtty_init ();
 #endif

include/common.h

@@ -195,18 +195,6 @@ typedef void (interrupt_handler_t)(void *);
 # endif
 #endif
 
-#ifndef CONFIG_SERIAL_MULTI
-
-#if defined(CONFIG_8xx_CONS_SMC1) || defined(CONFIG_8xx_CONS_SMC2) \
- || defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) \
- || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-#define CONFIG_SERIAL_MULTI	1
-
-#endif
-
-#endif /* CONFIG_SERIAL_MULTI */
-
 /*
  * General Purpose Utilities
  */

include/serial.h

@@ -63,7 +63,7 @@ extern int usbtty_tstc(void);
 
 #endif /* CONFIG_USB_TTY */
 
-#if defined(CONFIG_MPC512X) &&  defined(CONFIG_SERIAL_MULTI)
+#if defined(CONFIG_MPC512X)
 extern struct stdio_dev *open_port(int num, int baudrate);
 extern int close_port(int num);
 extern int write_port(struct stdio_dev *port, char *buf);

post/board/pdm360ng/coproc_com.c

@@ -28,8 +28,6 @@
 #include <post.h>
 #include <serial.h>
 
-#if defined(CONFIG_SERIAL_MULTI)
-
 /*
  * Actually the termination sequence of the coprocessor
  * commands is "\r\n" (CR LF), but here we use a side effect of
@@ -94,4 +92,3 @@ int coprocessor_post_test(int flags)
 
 	return 0;
 }
-#endif	/* CONFIG_SERIAL_MULTI */