leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f5cc89a82a
u-boot/configs/kmtepr2_defconfig

184 lines
4.8 KiB
Plaintext
Raw Normal View History

powerpc/83xx: add support for kmtepr2 board This board is similar to TUXX1, but it has differend FPGAs. Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com> Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2015-11-17 09:53:24 +00:00
CONFIG_PPC=y
configs: Migrate CONFIG_SYS_TEXT_BASE On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-03 17:10:38 +00:00
CONFIG_SYS_TEXT_BASE=0xF0000000
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x20000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8
mpc83xx: Get rid of CONFIG_83XX_CLKIN MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the system clock. To migrate the architecture, we can replace CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ. To do this * replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ * set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all MPC83xx config files Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:53 +00:00
CONFIG_SYS_CLK_FREQ=66000000
powerpc/83xx: add support for kmtepr2 board This board is similar to TUXX1, but it has differend FPGAs. Signed-off-by: Christoph Dietrich <christoph.dietrich@keymile.com> Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
2015-11-17 09:53:24 +00:00
CONFIG_MPC83xx=y
powerpc: Migrate HIGH_BATS to Kconfig Migrate the CONFIG_HIGH_BATS variable to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:56 +00:00
CONFIG_HIGH_BATS=y
keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configs The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:33 +00:00
CONFIG_TARGET_KMTEPR2=y
mpc83xx: Kconfig: Migrate HRCW to Kconfig The HRCW (hardware reset configuration word) is a constant that must be hard-coded into the boot loader image. So, it must be available at compile time, and cannot be migrated to the DT mechanism, but has to be kept in Kconfig. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:54 +00:00
CONFIG_CORE_PLL_RATIO_25_1=y
CONFIG_QUICC_MULT_FACTOR_3=y
CONFIG_BOOT_MEMORY_SPACE_LOW=y
CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y
mpc83xx: Migrate BATS config to Kconfig The BATs (block address translation registers) determine the initial memory window mappings. Hence, they must be known at compile time and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:57 +00:00
CONFIG_BAT0=y
CONFIG_BAT0_NAME="SDRAM"
CONFIG_BAT0_BASE=0x00000000
CONFIG_BAT0_LENGTH_256_MBYTES=y
CONFIG_BAT0_ACCESS_RW=y
CONFIG_BAT0_ICACHE_INHIBITED=y
CONFIG_BAT0_ICACHE_GUARDED=y
CONFIG_BAT0_DCACHE_INHIBITED=y
CONFIG_BAT0_DCACHE_GUARDED=y
CONFIG_BAT0_USER_MODE_VALID=y
CONFIG_BAT0_SUPERVISOR_MODE_VALID=y
CONFIG_BAT1=y
CONFIG_BAT1_NAME="IMMR"
CONFIG_BAT1_BASE=0xE0000000
CONFIG_BAT1_LENGTH_4_MBYTES=y
CONFIG_BAT1_ACCESS_RW=y
CONFIG_BAT1_ICACHE_INHIBITED=y
CONFIG_BAT1_ICACHE_GUARDED=y
CONFIG_BAT1_DCACHE_INHIBITED=y
CONFIG_BAT1_DCACHE_GUARDED=y
CONFIG_BAT1_USER_MODE_VALID=y
CONFIG_BAT1_SUPERVISOR_MODE_VALID=y
CONFIG_BAT2=y
CONFIG_BAT2_NAME="KMBEC_FPGA"
CONFIG_BAT2_BASE=0xE8000000
CONFIG_BAT2_LENGTH_128_MBYTES=y
CONFIG_BAT2_ACCESS_RW=y
CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT2_DCACHE_INHIBITED=y
CONFIG_BAT2_DCACHE_GUARDED=y
CONFIG_BAT2_USER_MODE_VALID=y
CONFIG_BAT2_SUPERVISOR_MODE_VALID=y
CONFIG_BAT3=y
CONFIG_BAT3_NAME="FLASH"
CONFIG_BAT3_BASE=0xF0000000
CONFIG_BAT3_LENGTH_256_MBYTES=y
CONFIG_BAT3_ACCESS_RW=y
CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT3_DCACHE_INHIBITED=y
CONFIG_BAT3_DCACHE_GUARDED=y
CONFIG_BAT3_USER_MODE_VALID=y
CONFIG_BAT3_SUPERVISOR_MODE_VALID=y
CONFIG_BAT4=y
CONFIG_BAT4_NAME="STACK_IN_DCACHE"
CONFIG_BAT4_BASE=0xE6000000
CONFIG_BAT4_ACCESS_RW=y
CONFIG_BAT4_USER_MODE_VALID=y
CONFIG_BAT4_SUPERVISOR_MODE_VALID=y
CONFIG_BAT5=y
CONFIG_BAT5_NAME="APP1"
CONFIG_BAT5_BASE=0xA0000000
CONFIG_BAT5_LENGTH_256_MBYTES=y
CONFIG_BAT5_ACCESS_RW=y
CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT5_DCACHE_INHIBITED=y
CONFIG_BAT5_DCACHE_GUARDED=y
CONFIG_BAT5_USER_MODE_VALID=y
CONFIG_BAT5_SUPERVISOR_MODE_VALID=y
CONFIG_BAT6=y
CONFIG_BAT6_NAME="APP2"
CONFIG_BAT6_BASE=0xB0000000
CONFIG_BAT6_LENGTH_256_MBYTES=y
CONFIG_BAT6_ACCESS_RW=y
CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y
CONFIG_BAT6_DCACHE_INHIBITED=y
CONFIG_BAT6_DCACHE_GUARDED=y
CONFIG_BAT6_USER_MODE_VALID=y
CONFIG_BAT6_SUPERVISOR_MODE_VALID=y
mpc83xx: Migrate LBLAW_* to Kconfig The LBLAW_* values determine the window configuration of the memory controller. Hence, they must be known at compile time, and cannot be implemented in the DT mechanism. Configuration of this crucial variable should still be somewhat comfortable. Hence, make its fields configurable in Kconfig, and assemble the final value from these. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:17:58 +00:00
CONFIG_LBLAW0=y
CONFIG_LBLAW0_BASE=0xF0000000
CONFIG_LBLAW0_NAME="FLASH"
CONFIG_LBLAW0_LENGTH_256_MBYTES=y
CONFIG_LBLAW1=y
CONFIG_LBLAW1_BASE=0xE8000000
CONFIG_LBLAW1_NAME="KMBEC_FPGA"
CONFIG_LBLAW1_LENGTH_128_MBYTES=y
CONFIG_LBLAW2=y
CONFIG_LBLAW2_BASE=0xA0000000
CONFIG_LBLAW2_NAME="APP1"
CONFIG_LBLAW2_LENGTH_256_MBYTES=y
CONFIG_LBLAW3=y
CONFIG_LBLAW3_BASE=0xB0000000
CONFIG_LBLAW3_NAME="APP2"
CONFIG_LBLAW3_LENGTH_256_MBYTES=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 18:45:25 +00:00
CONFIG_ELBC_BR0_OR0=y
CONFIG_BR0_OR0_NAME="FLASH"
CONFIG_BR0_OR0_BASE=0xF0000000
CONFIG_BR0_PORTSIZE_16BIT=y
CONFIG_OR0_AM_256_MBYTES=y
CONFIG_OR0_SCY_5=y
CONFIG_OR0_CSNT_EARLIER=y
CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR0_TRLX_RELAXED=y
CONFIG_OR0_EAD_EXTRA=y
CONFIG_ELBC_BR1_OR1=y
CONFIG_BR1_OR1_NAME="KMBEC_FPGA"
CONFIG_BR1_OR1_BASE=0xE8000000
CONFIG_OR1_AM_128_MBYTES=y
CONFIG_OR1_SCY_2=y
CONFIG_OR1_CSNT_EARLIER=y
CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y
CONFIG_OR1_TRLX_RELAXED=y
CONFIG_OR1_EAD_EXTRA=y
CONFIG_ELBC_BR2_OR2=y
CONFIG_BR2_OR2_NAME="APP1"
CONFIG_BR2_OR2_BASE=0xA0000000
CONFIG_OR2_AM_256_MBYTES=y
CONFIG_OR2_SCY_2=y
CONFIG_OR2_CSNT_EARLIER=y
CONFIG_OR2_ACS_QUARTER_CYCLE_EARLIER=y
CONFIG_OR2_TRLX_RELAXED=y
CONFIG_OR2_EAD_EXTRA=y
CONFIG_ELBC_BR3_OR3=y
CONFIG_BR3_OR3_NAME="APP2"
CONFIG_BR3_OR3_BASE=0xB0000000
CONFIG_BR3_PORTSIZE_16BIT=y
CONFIG_OR3_AM_256_MBYTES=y
CONFIG_OR3_SCY_4=y
mpc83xx: Migrate HID config to Kconfig Mirate the HID configuration settings to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:09 +00:00
CONFIG_HID0_FINAL_EMCP=y
CONFIG_HID0_FINAL_ICE=y
CONFIG_HID2_HBE=y
mpc83xx: Migrate arbiter config to Kconfig Migrate the arbiter configuration to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-01-21 08:18:12 +00:00
CONFIG_ACR_PIPE_DEP_4=y
CONFIG_ACR_RPTCNT_4=y
CONFIG_ACR_APARK_MASTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-26 18:45:25 +00:00
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
ppc/km: enable DM driver support in all defconfigs This is the first step to use DM support for the KM powerpc boards. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> CC: Mario Six <mario.six@gdsys.cc> CC: Wolfgang Denk <wd@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 09:04:34 +00:00
# CONFIG_SYS_MALLOC_F is not set
Kconfig: Move CONFIG_FIT and related options to Kconfig There are already two FIT options in Kconfig but the CONFIG options are still in the header files. We need to do a proper move to fix this. Move these options to Kconfig and tidy up board configuration: CONFIG_FIT CONFIG_OF_BOARD_SETUP CONFIG_OF_SYSTEM_SETUP CONFIG_FIT_SIGNATURE CONFIG_FIT_BEST_MATCH CONFIG_FIT_VERBOSE CONFIG_OF_STDOUT_VIA_ALIAS CONFIG_RSA Unfortunately the first one is a little complicated. We need to make sure this option is not enabled in SPL by this change. Also this option is enabled automatically in the host builds by defining CONFIG_FIT in the image.h file. To solve this, add a new IMAGE_USE_FIT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Note: Masahiro's moveconfig.py script is amazing. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add microblaze change, various configs/ re-applies] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-02-23 05:55:43 +00:00
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
Convert CONFIG_MISC_INIT_R to Kconfig This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-07-29 18:13:29 +00:00
CONFIG_MISC_INIT_R=y
common, kconfig: move VERSION_VARIABLE to Kconfig move VERSION_VARIABLE from board config file into a Kconfig option. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-09-09 06:12:49 +00:00
CONFIG_VERSION_VARIABLE=y
treewide: Migrate CONFIG_BOARD_EARLY_INIT_R to Kconfig Migrate the CONFIG_BOARD_EARLY_INIT_R option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:38:15 +00:00
CONFIG_BOARD_EARLY_INIT_R=y
treewide: Migrate CONFIG_LAST_STAGE_INIT to Kconfig Migrate the CONFIG_LAST_STAGE_INIT option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2018-03-28 12:38:16 +00:00
CONFIG_LAST_STAGE_INIT=y
configs: Re-sync HUSH options Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files. Remove all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 01:37:19 +00:00
CONFIG_HUSH_PARSER=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
cmd: Toggle the default value of CONFIG_CMD_IMLS Having this as a 'default y' is rather annoying because it doesn't actually compile unless other options are defined in the board header: ../cmd/bootm.c: In function 'do_imls_nor': ../cmd/bootm.c:330:7: error: 'CONFIG_SYS_MAX_FLASH_BANKS' undeclared (first use in this function); did you mean 'CONFIG_SYS_MAX_FLASH_SECT'? i < CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) { Make it 'default n' so people who develop new boards that start from a blank defconfig have one less compilation failure to debug. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-10-08 18:48:01 +00:00
CONFIG_CMD_IMLS=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_ASKENV=y
CONFIG_CMD_GREPENV=y
Convert CONFIG_CMD_EEPROM et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:10 +00:00
CONFIG_CMD_EEPROM=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_I2C=y
CONFIG_CMD_DHCP=y
configs: Re-sync with cmd/Kconfig Update the config.h and defconfig files for the commands that 8e3c036 converted over to Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-24 21:29:26 +00:00
CONFIG_CMD_MII=y
configs: Re-sync almost all of cmd/Kconfig This syncs up the current cmd/Kconfig and include/configs/ files with the only exception being CMD_NAND. Due to how we have used this historically we need to take further care here when converting. Signed-off-by: Tom Rini <trini@konsulko.com>
2016-04-22 20:41:25 +00:00
CONFIG_CMD_PING=y
Convert CONFIG_CMD_JFFS2 to Kconfig This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:37 +00:00
CONFIG_CMD_JFFS2=y
configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:54:45 +00:00
CONFIG_CMD_MTDPARTS=y
Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
2017-10-22 21:55:07 +00:00
CONFIG_MTDIDS_DEFAULT="nor0=boot"
CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),128k(env),128k(envred),-(ubi0);"
kconfig: introduce kconfig for UBI move the UBI config options into Kconfig. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Andrew F. Davis <afd@ti.com> Reviewed by: Evgeni Dobrev <evgeni at studio-punkt.com>
2016-09-21 05:58:19 +00:00
CONFIG_CMD_UBI=y
configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-22 22:36:16 +00:00
# CONFIG_CMD_UBIFS is not set
defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENT Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-10 16:28:03 +00:00
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_ADDR=0xF00C0000
CONFIG_ENV_ADDR_REDUND=0xF00E0000
ppc/km: enable DM driver support in all defconfigs This is the first step to use DM support for the KM powerpc boards. Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> CC: Mario Six <mario.six@gdsys.cc> CC: Wolfgang Denk <wd@denx.de> CC: Valentin Longchamp <valentin.longchamp@ch.abb.com> CC: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-25 09:04:34 +00:00
CONFIG_DM=y
Convert CONFIG_BOOTCOUNT_LIMIT to Kconfig This converts the following to Kconfig: CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
2018-02-09 22:50:57 +00:00
CONFIG_BOOTCOUNT_LIMIT=y
Migrate bootlimit to Kconfig Migrate boards which set bootlimit in the environment to Kconfig. We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting if we migrated it. display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME, but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to set bootlimit= in display5_factory_defconfig. This is okay because the display5_factory_defconfig doesn't need to have it set, as it is only meant to prepare the board in the factory. Environment changes for all modified configs as seen from buildman: boards.cfg is up to date. Nothing to do. Summary of 3 commits for 32 boards (8 threads, 1 job per thread) 01: Merge git://git.denx.de/u-boot-x86 arm: + draco etamin rastaban pxm2 display5 thuban rut 02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit 03: Migrate bootlimit to Kconfig - display5_factory: bootlimit=3 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
2018-07-21 20:25:33 +00:00
CONFIG_BOOTCOUNT_BOOTLIMIT=3
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-13 17:48:42 +00:00
# CONFIG_MMC is not set
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
flash: complete CONFIG_SYS_NO_FLASH move with renaming We repeated partial moves for CONFIG_SYS_NO_FLASH, but this is not completed. Finish this work by the tool. During this move, let's rename it to CONFIG_MTD_NOR_FLASH. Actually, we have more instances of "#ifndef CONFIG_SYS_NO_FLASH" than those of "#ifdef CONFIG_SYS_NO_FLASH". Flipping the logic will make the code more readable. Besides, negative meaning symbols do not fit in obj-$(CONFIG_...) style Makefiles. This commit was created as follows: [1] Edit "default n" to "default y" in the config entry in common/Kconfig. [2] Run "tools/moveconfig.py -y -r HEAD SYS_NO_FLASH" [3] Rename the instances in defconfigs by the following: find . -path './configs/*_defconfig' | xargs sed -i \ -e '/CONFIG_SYS_NO_FLASH=y/d' \ -e 's/# CONFIG_SYS_NO_FLASH is not set/CONFIG_MTD_NOR_FLASH=y/' [4] Change the conditionals by the following: find . -name '*.[ch]' | xargs sed -i \ -e 's/ifndef CONFIG_SYS_NO_FLASH/ifdef CONFIG_MTD_NOR_FLASH/' \ -e 's/ifdef CONFIG_SYS_NO_FLASH/ifndef CONFIG_MTD_NOR_FLASH/' \ -e 's/!defined(CONFIG_SYS_NO_FLASH)/defined(CONFIG_MTD_NOR_FLASH)/' \ -e 's/defined(CONFIG_SYS_NO_FLASH)/!defined(CONFIG_MTD_NOR_FLASH)/' [5] Modify the following manually - Rename the rest of instances - Remove the description from README - Create the new Kconfig entry in drivers/mtd/Kconfig - Remove the old Kconfig entry from common/Kconfig - Remove the garbage comments from include/configs/*.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-02-11 13:43:54 +00:00
CONFIG_MTD_NOR_FLASH=y
Convert CONFIG_FLASH_CFI_DRIVER et al to Kconfig This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-14 20:10:50 +00:00
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
drivers/pci/Kconfig: Add PCI Add 'PCI' as a menu option and migrate all existing users. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stephen Warren <swarren@nvidia.com>
2016-10-26 21:15:37 +00:00
# CONFIG_PCI is not set
configs: Migrate CONFIG_FMAN_ENET and some related options to Kconfig Move the main symbol for Freescale Fman Ethernet controller option to Kconfig. Also migrate the CONFIG_SYS_QE_FMAN_FW_IN_xxx macros and rename the SPIFLASH one to follow the same format as all of the others. To do this fully we need to migrate CONFIG_QC, do so. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-12 11:59:12 +00:00
CONFIG_QE=y
ns16550: move CONFIG_SYS_NS16550 to Kconfig Move CONFIG_SYS_NS16550 to Kconfig, and run moveconfig.py. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-19 13:48:14 +00:00
CONFIG_SYS_NS16550=y
Move CONFIG_OF_LIBFDT to Kconfig Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:42 +00:00
CONFIG_OF_LIBFDT=y
Reference in New Issue Copy Permalink