64 lines
1.3 KiB
Plaintext
64 lines
1.3 KiB
Plaintext
|
|
||
|
|
Summary
|
||
|
|
=======
|
||
|
|
|
||
|
|
This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
|
||
|
|
S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2
|
||
|
|
(and other) boards [1].
|
||
|
|
|
||
|
|
Currently the following boards are supported:
|
||
|
|
|
||
|
|
* FriendlyArm NanoPi2 [2]
|
||
|
|
* FriendlyArm NanoPC-T2 [3]
|
||
|
|
|
||
|
|
|
||
|
|
Build
|
||
|
|
=====
|
||
|
|
|
||
|
|
* NanoPi2 and NanoPC-T2
|
||
|
|
|
||
|
|
make s5p4418_nanopi2_defconfig
|
||
|
|
make
|
||
|
|
|
||
|
|
|
||
|
|
Installation
|
||
|
|
============
|
||
|
|
|
||
|
|
- Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android,
|
||
|
|
friendlyCore and LUbuntu)
|
||
|
|
- Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card
|
||
|
|
- Use dd in the directory where U-Boot has been built to update U-Boot:
|
||
|
|
(replace <SD-card> with the device used for the SD-card, e.g. sdc)
|
||
|
|
sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card>
|
||
|
|
- Boot the board from this SD-card
|
||
|
|
|
||
|
|
The source code for (the used?) LUbuntu 16.04 can be found at [5].
|
||
|
|
|
||
|
|
|
||
|
|
Links
|
||
|
|
=====
|
||
|
|
|
||
|
|
[1] FriendlyArm U-boot v2016.01:
|
||
|
|
|
||
|
|
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
|
||
|
|
|
||
|
|
|
||
|
|
[2] NanoPi2:
|
||
|
|
|
||
|
|
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2
|
||
|
|
|
||
|
|
|
||
|
|
[3] NanoPC-T2:
|
||
|
|
|
||
|
|
http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2
|
||
|
|
|
||
|
|
|
||
|
|
[4] FriendlyArm image files for NanoPi2:
|
||
|
|
|
||
|
|
http://download.friendlyarm.com//NanoPi2
|
||
|
|
|
||
|
|
|
||
|
|
[5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2:
|
||
|
|
|
||
|
|
https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y
|