leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e10481be1e
u-boot/configs/khadas-vim2_defconfig

69 lines
1.6 KiB
Plaintext
Raw Normal View History

ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_ARM=y
CONFIG_ARCH_MESON=y
CONFIG_SYS_TEXT_BASE=0x01000000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10 19:31:07 +00:00
CONFIG_NR_DRAM_BANKS=1
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_SIZE=0x2000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_DM_GPIO=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="meson-gxm-khadas-vim2"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-22 18:38:00 +00:00
CONFIG_MESON_GXM=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_DEBUG_UART_BASE=0xc81004c0
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim2"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-02-07 19:53:03 +00:00
CONFIG_CONSOLE_MUX=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_MISC_INIT_R=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_IMI is not set
CONFIG_CMD_ADC=y
CONFIG_CMD_GPIO=y
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
configs: khadas-vim2: enable support for SPI NOR flash Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20 13:44:43 +00:00
CONFIG_CMD_SF_TEST=y
CONFIG_CMD_SPI=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_CMD_USB=y
configs: khadas-vim2: Enable USB gadget with Mass Storage function Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-30 09:27:29 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
CONFIG_OF_CONTROL=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_SARADC_MESON=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_MMC_MESON_GX=y
configs: khadas-vim2: enable support for SPI NOR flash Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20 13:44:43 +00:00
CONFIG_MTD=y
mtd: rename CONFIG_MTD -> CONFIG_DM_MTD CONFIG_MTD must be reserved for the MTD core. Like any other subsystem, prefix the symbol by DM when it comes to DM support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Add Kconfig files] Signed-off-by: Tom Rini <trini@konsulko.com>
2019-10-03 17:50:04 +00:00
CONFIG_DM_MTD=y
configs: khadas-vim2: enable support for SPI NOR flash Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20 13:44:43 +00:00
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_WINBOND=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2019-04-29 19:54:04 +00:00
CONFIG_PHY_REALTEK=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_DM_ETH=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27 12:28:38 +00:00
CONFIG_DM_MDIO=y
CONFIG_DM_MDIO_MUX=y
configs: meson: use Designware glue driver for Amlogic Meson8b & later SoCs Use the proper Synopsys DWMAC Meson8b glue to handle the ethernet link type. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-02-25 08:44:35 +00:00
CONFIG_ETH_DESIGNWARE_MESON8B=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-27 12:28:38 +00:00
CONFIG_MDIO_MUX_MMIOREG=y
configs: khadas_vim2: Fix defconfig The Khadas VIM2 defconfig was missing the USB PHY config and two other misc configs to setup dram banks and call misc_init_r. Align it on the other Amlogic SoC based boards defconfig. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2019-04-03 11:46:37 +00:00
CONFIG_MESON_GXL_USB_PHY=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MESON_GXL=y
cmd: Kconfig: Change dependency for CMD_ADC CMD_ADC selected DM_REGULATOR unconditionally without enabling DM. That's why change select to depends on to cover it. Kconfig is showing this issue as: WARNING: unmet direct dependencies detected for REGMAP Depends on [n]: DM [=n] Selected by [y]: - DM_REGULATOR_PBIAS [=y] && DM_REGULATOR [=y] Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Update CMD_ADC=y configs to enable DM_REGULATOR now] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-19 08:44:17 +00:00
CONFIG_DM_REGULATOR=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_RESET=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_DEBUG_UART_SKIP_INIT=y
CONFIG_MESON_SERIAL=y
configs: khadas-vim2: enable support for SPI NOR flash Add the necessary configs to use the SPI NOR flash. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-04-20 13:44:43 +00:00
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_MESON_SPIFC=y
ARM: meson: Add Khadas VIM2 board support This adds platform code for the Khadas VIM2 board based on a Meson GXM (S912) SoC with the Meson GXM configuration. This initial submission supports UART, MMC/SDCard and Ethernet. USB is partially supported. All the code is from Neil Armstrong! I just rebased the code, do some cleanup and tested on my board. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Loic Devulder <ldevulder@suse.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
2018-10-03 10:02:07 +00:00
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_DWC3=y
configs: khadas-vim2: Enable USB gadget with Mass Storage function Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-30 09:27:29 +00:00
# CONFIG_USB_DWC3_GADGET is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-09 16:22:06 +00:00
CONFIG_USB_DWC3_MESON_GXL=y
configs: khadas-vim2: Enable USB gadget with Mass Storage function Enable configs to support USB gadget and Mass Storage Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2020-03-30 09:27:29 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
CONFIG_USB_GADGET_DWC2_OTG=y
CONFIG_USB_GADGET_DOWNLOAD=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 00:44:53 +00:00
CONFIG_OF_LIBFDT_OVERLAY=y
Reference in New Issue Copy Permalink