leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cfe673cda7
u-boot/lib/Kconfig

877 lines
26 KiB
Plaintext
Raw Normal View History

kconfig: add blank Kconfig files This would be useful to start moving various config options. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-09-16 07:32:58 +00:00
menu "Library routines"
powerpc: move ADDR_MAP to Kconfig Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-03 12:43:40 +00:00
config ADDR_MAP
bool "Enable support for non-identity virtual-physical mappings"
help
Enables helper code for implementing non-identity virtual-physical
memory mappings for 32bit CPUs.
lib: kconfig: Mention CONFIG_ADDR_MAP limitation in the help Mention that CONFIG_ADDR_MAP only works in the post-relocation phase. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 09:22:36 +00:00
This library only works in the post-relocation phase.
powerpc: move ADDR_MAP to Kconfig Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-06-03 12:43:40 +00:00
config SYS_NUM_ADDR_MAP
int "Size of the address-map table"
depends on ADDR_MAP
default 16
help
Sets the number of entries in the virtual-physical mapping table.
Convert CONFIG_PHYSMEM to Kconfig This converts the following to Kconfig: CONFIG_PHYSMEM Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Sean Anderson <seanga2@gmail.com>
2021-11-24 16:26:42 +00:00
config PHYSMEM
bool "Access to physical memory region (> 4G)"
help
Some basic support is provided for operations on memory not
normally accessible to 32-bit U-Boot - e.g. some architectures
support access to more than 4G of memory on 32-bit
machines using physical address extension or similar.
Enable this to access this basic support, which only supports clearing
the memory.
Convert CONFIG_BCH to Kconfig This converts the following to Kconfig: CONFIG_BCH Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-08-11 14:46:05 +00:00
config BCH
bool "Enable Software based BCH ECC"
help
Enables software based BCH ECC algorithm present in lib/bch.c
This is used by SoC platforms which do not have built-in ELM
hardware engine required for BCH ECC correction.
binman: Add a library to access binman entries SPL and TPL can access information about binman entries using link-time symbols but this is not available in U-Boot proper. Of course it could be made available, but the intention is to just read the device tree. Add support for this, so that U-Boot can locate entries. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:34 +00:00
config BINMAN_FDT
bool "Allow access to binman information in the device tree"
lib: Fix BINMAN_FDT dependency lib/binman.c references the following 3 ofnode APIs: ofnode_first_subnode(), ofnode_path() and ofnode_read_bool(). These APIs get built only when DM is on. Fix the dependency then. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-02-03 13:20:02 +00:00
depends on BINMAN && DM && OF_CONTROL
lib: kconfig: Limit BINMAN_FDT for OF_SEPARATE or OF_EMBED Generally speaking BINMAN_FDT makes sense for OF_SEPARATE or OF_EMBED. For the other OF_CONTROL methods, it's quite possible binman node is not available as binman is invoked during the build phase instead of runtime. Let's only turn it on for OF_SEPARATE or OF_EMBED by default. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-10 12:23:36 +00:00
default y if OF_SEPARATE || OF_EMBED
binman: Add a library to access binman entries SPL and TPL can access information about binman entries using link-time symbols but this is not available in U-Boot proper. Of course it could be made available, but the intention is to just read the device tree. Add support for this, so that U-Boot can locate entries. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-12-07 04:41:34 +00:00
help
This enables U-Boot to access information about binman entries,
stored in the device tree in a binman node. Typical uses are to
locate entries in the firmware image. See binman.h for the available
functionality.
kconfig: move CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED to Kconfig If this option is enabled, the objects under lib/ directory are compiled with speed optimization, not size optimization. (Currently, only used by some Blackfin boards.) Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2014-09-16 07:32:59 +00:00
config CC_OPTIMIZE_LIBS_FOR_SPEED
bool "Optimize libraries for speed"
help
Enabling this option will pass "-O2" to gcc when compiling
under "lib" directory.
If unsure, say N.
lib: Create a new Kconfig option for charset conversion Rather than looking at two KConfig options in the Makefile, create a new Kconfig option for compiling lib/charset.c Enable it for UFS also, which needs this support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-02 18:36:17 +00:00
config CHARSET
bool
efi: Make unicode printf available to the app This is needed to show unicode strings. Enable this code in the app. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2021-12-29 18:57:35 +00:00
default y if UT_UNICODE || EFI_LOADER || UFS || EFI_APP
lib: Create a new Kconfig option for charset conversion Rather than looking at two KConfig options in the Makefile, create a new Kconfig option for compiling lib/charset.c Enable it for UFS also, which needs this support. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-02 18:36:17 +00:00
help
Enables support for various conversions between different
character sets, such as between unicode representations and
different 'code pages'.
lib: Kconfig: Move DYNAMIC_CRC_TABLE to Kconfig Add CONFIG prefix to DYNAMIC_CRC_TABLE and implement it in Kconfig. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
2018-02-06 13:45:58 +00:00
config DYNAMIC_CRC_TABLE
bool "Enable Dynamic tables for CRC"
help
Enable this option to calculate entries for CRC tables at runtime.
This can be helpful when reducing the size of the build image
kconfig: Introduce HAVE_ARCH_IOMAP Introduce a new Kconfig option for architecture codes to control whether it provides io{read,write}{8,16,32} I/O accessor functions. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-15 09:21:15 +00:00
config HAVE_ARCH_IOMAP
bool
help
Enable this option if architecture provides io{read,write}{8,16,32}
I/O accessor functions.
kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23 16:30:43 +00:00
config HAVE_PRIVATE_LIBGCC
bool
Convert LIB_UUID to Kconfig config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
2018-02-06 18:14:28 +00:00
config LIB_UUID
bool
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
config PRINTF
bool
default y
config SPL_PRINTF
bool
select SPL_SPRINTF
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
select SPL_STRTO if !SPL_USE_TINY_PRINTF
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
config TPL_PRINTF
bool
select TPL_SPRINTF
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
select TPL_STRTO if !TPL_USE_TINY_PRINTF
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
config SPRINTF
bool
default y
config SPL_SPRINTF
bool
config TPL_SPRINTF
bool
lib: sscanf: add sscanf implementation Port sscanf implementation from mini-os and introduce new Kconfig option to enable it: CONFIG_SSCANF. Disable by default. Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
2020-08-06 09:42:52 +00:00
config SSCANF
bool
spl: Split sprintf, strto* from SPL serial in Kconfig When SPL serial is disabled, callers who need sprintf or strtoul fail because their inclusion is guarded by CONFIG_SPL_SERIAL_SUPPORT/ CONFIG_TPL_SERIAL_SUPPORT. Split printf, sprintf and strto into their own entries and then select all of them if SERIAL_SUPPORT is enabled to match the current behaviour. Include panic.o unconditionally as it can be called from anywhere which uses BUG_ON(). Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
2018-04-19 04:32:54 +00:00
config STRTO
bool
default y
config SPL_STRTO
bool
config TPL_STRTO
bool
mmc: Separate "mmc swrite" from fastboot Introduce CONFIG_IMAGE_SPARSE and CONFIG_CMD_MMC_SWRITE so the "mmc swrite" command is separated from the fastboot code. Move image-sparse from common to lib so it's clear it's library code. Rename CONFIG_FASTBOOT_FLASH_FILLBUF_SIZE to CONFIG_IMAGE_SPARSE_FILLBUF_SIZE and migrate it to Kconfig. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:52 +00:00
config IMAGE_SPARSE
bool
config IMAGE_SPARSE_FILLBUF_SIZE
hex "Android sparse image CHUNK_TYPE_FILL buffer size"
default 0x80000
depends on IMAGE_SPARSE
help
Set the size of the fill buffer used when processing CHUNK_TYPE_FILL
chunks.
kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23 16:30:43 +00:00
config USE_PRIVATE_LIBGCC
bool "Use private libgcc"
depends on HAVE_PRIVATE_LIBGCC
lib: Enable private libgcc by default This patch decouples U-Boot binary from the toolchain on systems where private libgcc is available. Instead of pulling in functions provided by the libgcc from the toolchain, U-Boot will use it's own set of libgcc functions. These functions are usually imported from Linux kernel, which also uses it's own libgcc functions instead of the ones provided by the toolchain. This patch solves a rather common problem. The toolchain can usually generate code for many variants of target architecture and often even different endianness. The libgcc on the other hand is usually compiled for one particular configuration and the functions provided by it may or may not be suited for use in U-Boot. This can manifest in two ways, either the U-Boot fails to compile altogether and linker will complain or, in the much worse case, the resulting U-Boot will build, but will misbehave in very subtle and hard to debug ways. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2016-05-26 16:01:47 +00:00
default y if HAVE_PRIVATE_LIBGCC && ((ARM && !ARM64) || MIPS)
kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23 16:30:43 +00:00
help
This option allows you to use the built-in libgcc implementation
cosmetic: Fix typos "privide" Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-30 11:17:42 +00:00
of U-Boot instead of the one provided by the compiler.
kconfig: move CONFIG_USE_PRIVATE_LIBGCC to Kconfig The private libgcc is supported only on ARM, MIPS, PowerPC, SH, x86. Those architectures should "select" HAVE_PRIVATE_LIBGCC and CONFIG_USE_PRIVATE_LIBGCC should depend on it. Currently, this option is enabled on Tegra boards and x86 architecture. Move the definition from header files to Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Tested-by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
2014-10-23 16:30:43 +00:00
If unsure, say N.
kconfig: move CONFIG_SYS_HZ to lib/Kconfig CONFIG_SYS_HZ is always defined as 1000 in config_fallbacks.h (but some boards still have redundant definitions). This commit moves the definition and the document in README to Kconfig. Since lib/Kconfig can assure that CONFIG_SYS_HZ is 1000, the sanity check in lib/time.c should be removed. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-10-23 16:30:40 +00:00
config SYS_HZ
int
default 1000
help
The frequency of the timer returned by get_timer().
get_timer() must operate in milliseconds and this option must be
set to 1000.
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
config SPL_USE_TINY_PRINTF
Kconfig: disambiguate config names for tiny printf 27084c03d36a ("spl: Allow tiny printf() to be controlled in SPL and TPL") split this option in two for TPL and SPL, but didn't change the Kconfig names, making them hard to set quickly. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-10 16:23:53 +00:00
bool "Enable tiny printf() version in SPL"
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
depends on SPL
configs: Make USE_TINY_PRINTF depend on SPL||TPL and be default The USE_TINY_PRINTF symbol only changes things within SPL and TPL builds, so make it depend on that support. Next, make it default as within these cases we should rarely have need of more advanced print formats outside of the debug context. To do this, in a few cases we need to correct our Kconfig dependencies as we had cases of non-SPL targets select'ing this symbol. Finally, in the case of a few boards we really do need the full printf functionality. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-06-08 16:46:18 +00:00
default y
lib/tiny-printf.c: Add tiny printf function for space limited environments This patch adds a small printf() version that supports all basic formats. Its intented to be used in U-Boot SPL versions on platforms with very limited internal RAM sizes. To enable it, just define CONFIG_USE_TINY_PRINTF in your defconfig. This will result in the SPL using this tiny function and the main U-Boot still using the full-blown printf() function. This code was copied from: http://www.sparetimelabs.com/printfrevisited With mostly only coding style related changes so that its checkpatch clean. The size reduction is about 2.5KiB. Here a comparison for the db-mv784mp-gp (Marvell AXP) SPL: Without this patch: 58963 18536 1928 79427 13643 ./spl/u-boot-spl With this patch: 56542 18536 1956 77034 12cea ./spl/u-boot-spl Note: To make it possible to compile tiny-printf.c instead of vsprintf.c when CONFIG_USE_TINY_PRINTF is defined, the functions printf() and vprintf() are moved from common/console.c into vsprintf.c in this patch. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Tom Rini <trini@konsulko.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
2015-11-23 06:00:22 +00:00
help
This option enables a tiny, stripped down printf version.
This should only be used in space limited environments,
like SPL versions with hard memory limits. This version
reduces the code size by about 2.5KiB on armv7.
The supported format specifiers are %c, %s, %u/%d and %x.
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
config TPL_USE_TINY_PRINTF
Kconfig: disambiguate config names for tiny printf 27084c03d36a ("spl: Allow tiny printf() to be controlled in SPL and TPL") split this option in two for TPL and SPL, but didn't change the Kconfig names, making them hard to set quickly. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
2019-11-10 16:23:53 +00:00
bool "Enable tiny printf() version in TPL"
spl: Allow tiny printf() to be controlled in SPL and TPL At present there is only one control for this and it is used for both SPL and TPL. But SPL might have a lot more space than TPL so the extra cost of a full printf() might be acceptable. Split the option into two, providing separate SPL and TPL controls. The TPL setting defaults to the same as SPL. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:27 +00:00
depends on TPL
default y if SPL_USE_TINY_PRINTF
help
This option enables a tiny, stripped down printf version.
This should only be used in space limited environments,
like SPL versions with hard memory limits. This version
reduces the code size by about 2.5KiB on armv7.
The supported format specifiers are %c, %s, %u/%d and %x.
Move CONFIG_PANIC_HANG to Kconfig Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: York Sun <york.sun@nxp.com>
2017-12-04 03:37:00 +00:00
config PANIC_HANG
bool "Do not reset the system on fatal error"
help
Define this option to stop the system in case of a fatal error,
so that you have to reset it manually. This is probably NOT a good
idea for an embedded system where you want the system to reboot
automatically as fast as possible, but it may be useful during
development since you can try to debug the conditions that lead to
the situation.
kconfig: Move REGEX to Kconfig Having this as a Kconfig allows it to be a dependent feature. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-21 22:02:42 +00:00
config REGEX
bool "Enable regular expression support"
Allow CONFIG_REGEX to be disabled when CONFIG_NET Instead of selecting REGEX when NET is enabled, make it the default, but allow boards that are tiny to disable it and lose functionality on all but the first Ethernet adapter. cm-bf548, bf538f-ezkit, and bf533-stamp need this. None appear to have more than one Ethernet interface. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2015-06-22 22:57:36 +00:00
default y if NET
kconfig: Move REGEX to Kconfig Having this as a Kconfig allows it to be a dependent feature. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2015-04-21 22:02:42 +00:00
help
If this variable is defined, U-Boot is linked against the
SLRE (Super Light Regular Expression) library, which adds
regex support to some commands, for example "env grep" and
"setexpr".
Convert CONFIG LIB_HW_RAND to Kconfig config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 16:18:18 +00:00
choice
prompt "Pseudo-random library support type"
lib: Kconfig dependencies for pseudo-random library drivers/rng/sandbox_rng.c requires rand() to be defined but configuration option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not exist. test/lib/test_aes.c requires rand() to be defined. Fix the selection criteria for choice "Pseudo-random library support type". Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-01-19 18:28:12 +00:00
depends on NET_RANDOM_ETHADDR || RANDOM_UUID || CMD_UUID || \
fs: fat: create correct short names The current function set_name() used to create short names has the following deficiencies resolved by this patch: * Long names (e.g. FOO.TXT) are stored even if a short name is enough. * Short names with spaces are created, e.g. "A ~1.TXT". * Short names with illegal characters are created, e.g. "FOO++BAR". * Debug output does not not consider that the short file name has no concluding '\0'. The solution for the following bug is split of into a separate patch: * Short file names must be unique. This patch only provides the loop over possible short file names. Fixes: c30a15e590c ("FAT: Add FAT write feature") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-20 11:55:22 +00:00
RNG_SANDBOX || UT_LIB && AES || FAT_WRITE
Convert CONFIG LIB_HW_RAND to Kconfig config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 16:18:18 +00:00
default LIB_RAND
blackfin: fix undefined reference to srand and rand Commit 9ba9e85f3f1c (net: Fix NET_RANDOM_ETHADDR dependencies) accidentally dropped CONFIG_LIB_RAND defines for 14 Blackfin boards. Prior to that commit, those boards defined CONFIG_LIB_RAND, but not CONFIG_NET_RANDOM_ETHADDR. So, commit 9ba9e85f3f1c should not have touched them, but in fact it ripped CONFIG_LIB_RAND off from all the header files, which caused undefined reference to srand and rand. CONFIG_LIB_RAND=y must be revived for such boards. BTW, this commit indeed makes it better, but even with this fix, three boards (bf533-stamp, bf538f-ezkit, cm-bf548) still can not build due to region 'ram' overflowed error. This was cause by commit 6eed3786c68c (net: Move the CMD_NET config to defconfigs) because CMD_NET selects NET, and NET selects REGEX. Eventually, some boards were newly enabled with CONFIG_REGEX, increasing the memory footprint. A patch is expected to fix the build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-06-11 10:16:43 +00:00
help
Convert CONFIG LIB_HW_RAND to Kconfig config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 16:18:18 +00:00
Select the library to provide pseudo-random number generator
functions. LIB_HW_RAND supports certain hardware engines that
provide this functionality. If in doubt, select LIB_RAND.
config LIB_RAND
bool "Pseudo-random library support"
config LIB_HW_RAND
kconfig: fix some typos Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-05-26 17:07:15 +00:00
bool "HW Engine for random library support"
Convert CONFIG LIB_HW_RAND to Kconfig config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-06 16:18:18 +00:00
endchoice
net: Fix NET_RANDOM_ETHADDR dependencies NET_RANDOM_ETHADDR depends on lib/rand.c. This patch adds dependency to Kconfig to ensure that library is also compiled. Remove the definitions from Blackfin boards' include/configs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2015-05-25 09:37:22 +00:00
x86: Allow any arch to generate ACPI tables These have sadly found their way to ARM now. Allow any arch to support generating ACPI tables. Disable this for the tools build. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-12-01 16:02:36 +00:00
config SUPPORT_ACPI
bool
help
Enable this if your arch or board can support generating ACPI
(Advanced Configuration and Power Interface) tables. In this case
U-Boot can generate these tables and pass them to the Operating
System.
config GENERATE_ACPI_TABLE
bool "Generate an ACPI (Advanced Configuration and Power Interface) table"
depends on SUPPORT_ACPI
select QFW if QEMU
help
The Advanced Configuration and Power Interface (ACPI) specification
provides an open standard for device configuration and management
by the operating system. It defines platform-independent interfaces
for configuration and power management monitoring.
string: Provide a slimmed-down memset() Most of the time the optimised memset() is what we want. For extreme situations such as TPL it may be too large. For example on the 'rock' board, using a simple loop saves a useful 48 bytes. With gcc 4.9 and the rodata bug, this patch is enough to reduce the TPL image below the limit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2017-04-02 15:50:28 +00:00
config SPL_TINY_MEMSET
bool "Use a very small memset() in SPL"
help
The faster memset() is the arch-specific one (if available) enabled
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
better performance by writing a word at a time. But in very
lib: Kconfig: spelling fixes Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-13 09:13:28 +00:00
size-constrained environments even this may be too big. Enable this
string: Provide a slimmed-down memset() Most of the time the optimised memset() is what we want. For extreme situations such as TPL it may be too large. For example on the 'rock' board, using a simple loop saves a useful 48 bytes. With gcc 4.9 and the rodata bug, this patch is enough to reduce the TPL image below the limit. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2017-04-02 15:50:28 +00:00
option to reduce code size slightly at the cost of some speed.
rockchip: rk3188: rock: adjust for SPL/TPL split With the changes to split SPL/TPL for the RK3368, I apparently missed some needed adjustments to the RK3188 Kconfig and rock_defconfig. This fixes build-issues for the rock board after applying the RK3368 enablement (and SPL/TPL) set that resulted from TPL_SERIAL_SUPPORT, TPL_ROCKCHIP_BACK_TO_BROM and TPL_TINY_MEMSET being separate symbols now. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-03 20:52:04 +00:00
config TPL_TINY_MEMSET
bool "Use a very small memset() in TPL"
help
The faster memset() is the arch-specific one (if available) enabled
by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get
better performance by writing a word at a time. But in very
lib: Kconfig: spelling fixes Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-01-13 09:13:28 +00:00
size-constrained environments even this may be too big. Enable this
rockchip: rk3188: rock: adjust for SPL/TPL split With the changes to split SPL/TPL for the RK3368, I apparently missed some needed adjustments to the RK3188 Kconfig and rock_defconfig. This fixes build-issues for the rock board after applying the RK3368 enablement (and SPL/TPL) set that resulted from TPL_SERIAL_SUPPORT, TPL_ROCKCHIP_BACK_TO_BROM and TPL_TINY_MEMSET being separate symbols now. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-03 20:52:04 +00:00
option to reduce code size slightly at the cost of some speed.
mtd: ubi: Select RBTREE option from MTD_UBI Kconfig entry Expose the RBTREE feature through Kconfig and select this option from the MTD_UBI option. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com> [Rebased on master] Signed-off-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:05 +00:00
config RBTREE
bool
rtc: add support for s35392a Add support for S35392A RTC. The driver supports both U-Boot driver models. Signed-off-by: Nandor Han <nandor.han@ge.com> Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Heiko Schocher <hs@denx.de>
2017-11-08 15:35:14 +00:00
config BITREVERSE
bool "Bit reverse library from Linux"
Convert CONFIG_TRACE to Kconfig This converts the following to Kconfig: CONFIG_TRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:51 +00:00
config TRACE
bool "Support for tracing of function calls and timing"
imply CMD_TRACE
trace: select TIMER_EARLY to avoid infinite recursion When tracing functions is enabled this adds calls to __cyg_profile_func_enter() and __cyg_profile_func_exit() to the traced functions. __cyg_profile_func_enter() and __cyg_profile_func_exit() invoke timer_get_us() to record the entry and exit time. initr_dm() will make gd->dm_root = NULL and gd->timer = NULL, so timer_get_us() -> get_ticks() -> dm_timer_init() will lead to an indefinite recursion. So select TIMER_EARLY when tracing got enabled. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Rick Chen <rick@andestech.com>
2021-01-17 12:41:24 +00:00
select TIMER_EARLY
Convert CONFIG_TRACE to Kconfig This converts the following to Kconfig: CONFIG_TRACE Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:51 +00:00
help
Enables function tracing within U-Boot. This allows recording of call
traces including timing information. The command can write data to
memory for exporting for analysis (e.g. using bootchart).
See doc/README.trace for full details.
Convert CONFIG_TRACE_BUFFER_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:52 +00:00
config TRACE_BUFFER_SIZE
hex "Size of trace buffer in U-Boot"
depends on TRACE
default 0x01000000
help
Sets the size of the trace buffer in U-Boot. This is allocated from
memory during relocation. If this buffer is too small, the trace
history will be truncated, with later records omitted.
If early trace is enabled (i.e. before relocation), this buffer must
be large enough to include all the data from the early trace buffer as
well, since this is copied over to the main buffer during relocation.
A trace record is emitted for each function call and each record is
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
the size is too small then 'trace stats' will show a message saying
how many records were dropped due to buffer overflow.
trace: make call depth limit customizable Up to now we had hard coded values for the call depth up to which trace records are created: 200 for early tracing, 15 thereafter. UEFI applications reach a call depth of 80 or above. Provide customizing settings for the call trace depth limit and the early call trace depth limit. Use the old values as defaults. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-02 11:30:09 +00:00
config TRACE_CALL_DEPTH_LIMIT
int "Trace call depth limit"
depends on TRACE
default 15
help
Sets the maximum call depth up to which function calls are recorded.
Convert CONFIG_TRACE_BUFFER_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:52 +00:00
config TRACE_EARLY
bool "Enable tracing before relocation"
depends on TRACE
help
Sometimes it is helpful to trace execution of U-Boot before
relocation. This is possible by using a arch-specific, fixed buffer
position in memory. Enable this option to start tracing as early as
possible after U-Boot starts.
config TRACE_EARLY_SIZE
hex "Size of early trace buffer in U-Boot"
depends on TRACE_EARLY
default 0x00100000
help
Sets the size of the early trace buffer in bytes. This is used to hold
tracing information before relocation.
trace: make call depth limit customizable Up to now we had hard coded values for the call depth up to which trace records are created: 200 for early tracing, 15 thereafter. UEFI applications reach a call depth of 80 or above. Provide customizing settings for the call trace depth limit and the early call trace depth limit. Use the old values as defaults. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-06-02 11:30:09 +00:00
config TRACE_EARLY_CALL_DEPTH_LIMIT
int "Early trace call depth limit"
depends on TRACE_EARLY
default 200
help
Sets the maximum call depth up to which function calls are recorded
during early tracing.
Convert CONFIG_TRACE_BUFFER_SIZE et al to Kconfig This converts the following to Kconfig: CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY_SIZE CONFIG_TRACE_EARLY CONFIG_TRACE_EARLY_ADDR Signed-off-by: Simon Glass <sjg@chromium.org>
2019-04-08 19:20:52 +00:00
config TRACE_EARLY_ADDR
hex "Address of early trace buffer in U-Boot"
depends on TRACE_EARLY
default 0x00100000
help
Sets the address of the early trace buffer in U-Boot. This memory
must be accessible before relocation.
A trace record is emitted for each function call and each record is
12 bytes (see struct trace_call). A suggested minimum size is 1MB. If
the size is too small then the message which says the amount of early
data being coped will the the same as the
lib/circbuf: Make circbuf selectable symbol It is currenly only used from usbtty driver but make it properly selectable via Kconfig symbol, for future usage. Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
2021-11-25 17:16:14 +00:00
config CIRCBUF
bool "Enable circular buffer support"
Add a dhrystone benchmark command Drystone provides a convenient sanity check that the CPU is running at full speed. Add this as a command which can be enabled as needed. Note: I investigated using Coremark for this but there was a license agreement and I could not work out if it was GPL-compatible. Signed-off-by: Simon Glass <sjg@chromium.org>
2015-06-23 21:38:23 +00:00
source lib/dhry/Kconfig
Convert CONFIG_CMD_AES et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:49 +00:00
menu "Security support"
config AES
bool "Support the AES algorithm"
help
This provides a means to encrypt and decrypt data using the AES
(Advanced Encryption Standard). This algorithm uses a symetric key
and is widely used as a streaming cipher. Different key lengths are
supported by the algorithm but only a 128-bit key is supported at
present.
lib: ecdsa: Implement UCLASS_ECDSA verification on target Implement the crypto_algo .verify() function for ecdsa256. Because it backends on UCLASS_ECDSA, this change is focused on parsing the keys from devicetree and passing this information to the specific UCLASS driver. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-07-29 16:47:16 +00:00
source lib/ecdsa/Kconfig
lib/rsa: Add Kconfig for devices supporting RSA Modular Exponentiation Kconfig option added for devices which support RSA Verification. 1. RSA_SOFTWARE_EXP Enables driver for supporting RSA Modular Exponentiation in Software 2. RSA_FREESCALE_EXP Enables driver for supporting RSA Modular Exponentiation using Freescale specific driver The above drivers use RSA uclass Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> (Removed duplicate line in Kconfig comment) Change-Id: I7663c4d5350e2bfc3dfa2696f70ef777d6ccc6f6
2015-01-23 10:31:56 +00:00
source lib/rsa/Kconfig
lib: crypto: add x509 parser Imported from linux kernel v5.3: x509.asn1 without changes x509_akid.asn1 without changes x509_parser.h without changes x509_cert_parser.c with changes marked as __UBOOT__ x509_public_key.c with changes marked as __UBOOT__ Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-11-13 00:45:00 +00:00
source lib/crypto/Kconfig
lib: add crypt subsystem Add the basic functionality required to support the standard crypt format. The files crypt-sha256.c and crypt-sha512.c originate from libxcrypt and their formatting is therefor retained. The integration is done via a crypt_compare() function in crypt.c. ``` libxcrypt $ git describe --long --always --all tags/v4.4.17-0-g6b110bc ``` Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
2021-07-08 13:57:33 +00:00
source lib/crypt/Kconfig
FIT: Modify option FIT_SIGNATURE in Kconfig For FIT signature based approach to work, RSA library needs to be selected. The FIT_SIGNATURE option in Kconfig is modified to automatically select RSA. Selecting RSA compiles the RSA library required for image verification. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23 10:31:51 +00:00
tpm: Add Kconfig options for TPMs Add new Kconfig options for TPMs in preparation for moving boards to use Kconfig for TPM configuration. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2015-08-23 00:31:19 +00:00
config TPM
bool "Trusted Platform Module (TPM) Support"
dm: tpm: Drop CONFIG_DM_TPM Now that all TPM drivers use driver model, we can drop the special driver model CONFIG option. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
2015-10-03 12:39:36 +00:00
depends on DM
tpm: Add Kconfig options for TPMs Add new Kconfig options for TPMs in preparation for moving boards to use Kconfig for TPM configuration. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Christophe Ricard<christophe-h.ricard@st.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2015-08-23 00:31:19 +00:00
help
This enables support for TPMs which can be used to provide security
features for your board. The TPM can be connected via LPC or I2C
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
command to interactive the TPM. Driver model support is provided
for the low-level TPM interface, but only one TPM is supported at
a time by the TPM library.
tpm: Add support for SPL and TPL At present the tpm can only be used in U-Boot proper. Updated it to work in SPL and TPL also. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:19 +00:00
config SPL_TPM
bool "Trusted Platform Module (TPM) Support in SPL"
depends on SPL_DM
help
This enables support for TPMs which can be used to provide security
features for your board. The TPM can be connected via LPC or I2C
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
command to interactive the TPM. Driver model support is provided
for the low-level TPM interface, but only one TPM is supported at
a time by the TPM library.
config TPL_TPM
bool "Trusted Platform Module (TPM) Support in TPL"
depends on TPL_DM
help
This enables support for TPMs which can be used to provide security
features for your board. The TPM can be connected via LPC or I2C
and a sandbox TPM is provided for testing purposes. Use the 'tpm'
command to interactive the TPM. Driver model support is provided
for the low-level TPM interface, but only one TPM is supported at
a time by the TPM library.
Convert CONFIG_CMD_AES et al to Kconfig This converts the following to Kconfig: CONFIG_CMD_AES CONFIG_AES Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add select AES to CMD_AES] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-04-27 04:27:49 +00:00
endmenu
avb2.0: integrate avb 2.0 into the build system Integrate libavb into the build system. Introduce CONFIG_LIBAVB build option. Signed-off-by: Igor Opaniuk <igor.opaniuk@linaro.org>
2018-06-03 18:56:37 +00:00
menu "Android Verified Boot"
config LIBAVB
bool "Android Verified Boot 2.0 support"
depends on ANDROID_BOOT_IMAGE
help
This enables support of Android Verified Boot 2.0 which can be used
to assure the end user of the integrity of the software running on a
device. Introduces such features as boot chain of trust, rollback
protection etc.
endmenu
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
menu "Hashing Support"
lib: add BLAKE2 hash support The code is cross-ported from BLAKE2 reference implementation (https://github.com/BLAKE2/BLAKE2). With minimal change to remove unused macros/features. Currently there is only one user inside U-boot (btrfs), and since it only utilize BLAKE2B, all other favors are all removed. Signed-off-by: Qu Wenruo <wqu@suse.com> [trini: Rename ROUND to R to avoid clash with <linux/bitops.h> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 06:12:07 +00:00
config BLAKE2
bool "Enable BLAKE2 support"
help
This option enables support of hashing using BLAKE2B algorithm.
The hash is calculated in software.
The BLAKE2 algorithm produces a hash value (digest) between 1 and
64 bytes.
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
config SHA1
bool "Enable SHA1 support"
help
This option enables support of hashing using SHA1 algorithm.
The hash is calculated in software.
The SHA1 algorithm produces a 160-bit (20-byte) hash value
(digest).
config SHA256
bool "Enable SHA256 support"
help
This option enables support of hashing using SHA256 algorithm.
The hash is calculated in software.
The SHA256 algorithm produces a 256-bit (32-byte) hash value
(digest).
Add support for SHA384 and SHA512 The current recommendation for best security practice from the US government is to use SHA384 for TOP SECRET [1]. This patch adds support for SHA384 and SHA512 in the hash command, and also allows FIT images to be hashed with these algorithms, and signed with sha384,rsaXXXX and sha512,rsaXXXX The SHA implementation is adapted from the linux kernel implementation. [1] Commercial National Security Algorithm Suite http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-04-16 05:36:52 +00:00
config SHA512
bool "Enable SHA512 support"
help
This option enables support of hashing using SHA512 algorithm.
The hash is calculated in software.
The SHA512 algorithm produces a 512-bit (64-byte) hash value
(digest).
config SHA384
bool "Enable SHA384 support"
lib: Drop SHA512_ALGO in lieu of SHA512 SHA512_ALGO was used as a "either SHA512 or SHA384", although the implementations of these two algorithms share a majority of code. From a Kconfig interface perspective, it makes sense to present two distinct options. This requires #ifdefing out the SHA512 implementation from sha512.c. The latter doesn't make any sense. It's reasonable to say in Kconfig that SHA384 depends on SHA512, and seems to be the more polite way to handle the selection. Thus, automatically select SHA512 when SHA384 is enabled. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-03 00:54:18 +00:00
select SHA512
Add support for SHA384 and SHA512 The current recommendation for best security practice from the US government is to use SHA384 for TOP SECRET [1]. This patch adds support for SHA384 and SHA512 in the hash command, and also allows FIT images to be hashed with these algorithms, and signed with sha384,rsaXXXX and sha512,rsaXXXX The SHA implementation is adapted from the linux kernel implementation. [1] Commercial National Security Algorithm Suite http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-04-16 05:36:52 +00:00
help
This option enables support of hashing using SHA384 algorithm.
lib: Drop SHA512_ALGO in lieu of SHA512 SHA512_ALGO was used as a "either SHA512 or SHA384", although the implementations of these two algorithms share a majority of code. From a Kconfig interface perspective, it makes sense to present two distinct options. This requires #ifdefing out the SHA512 implementation from sha512.c. The latter doesn't make any sense. It's reasonable to say in Kconfig that SHA384 depends on SHA512, and seems to be the more polite way to handle the selection. Thus, automatically select SHA512 when SHA384 is enabled. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-03 00:54:18 +00:00
The hash is calculated in software. This is also selects SHA512,
because these implementations share the bulk of the code..
Add support for SHA384 and SHA512 The current recommendation for best security practice from the US government is to use SHA384 for TOP SECRET [1]. This patch adds support for SHA384 and SHA512 in the hash command, and also allows FIT images to be hashed with these algorithms, and signed with sha384,rsaXXXX and sha512,rsaXXXX The SHA implementation is adapted from the linux kernel implementation. [1] Commercial National Security Algorithm Suite http://www.iad.gov/iad/programs/iad-initiatives/cnsa-suite.cfm Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
2020-04-16 05:36:52 +00:00
The SHA384 algorithm produces a 384-bit (48-byte) hash value
(digest).
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
config SHA_HW_ACCEL
hash: Kconfig option for SHA512 hardware acceleration Commit a479f103dc1c ("hash: Allow for SHA512 hardware implementations") defined function definitions for hardware accelerated SHA384 and SHA512. If CONFIG_SHA_HW_ACCEL=y, these functions are used. We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the new functions hw_sha384() and hw_sha512(). For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The missing hardware acceleration functions lead to build errors on boards like peach-pi_defconfig. Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the functions hw_sha384() and hw_sha512() shall be used to implement the SHA384 and SHA512 algorithms. Fixes: a479f103dc1c ("hash: Allow for SHA512 hardware implementations") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-14 05:08:27 +00:00
bool "Enable hardware acceleration for SHA hash functions"
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
help
hash: Kconfig option for SHA512 hardware acceleration Commit a479f103dc1c ("hash: Allow for SHA512 hardware implementations") defined function definitions for hardware accelerated SHA384 and SHA512. If CONFIG_SHA_HW_ACCEL=y, these functions are used. We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the new functions hw_sha384() and hw_sha512(). For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The missing hardware acceleration functions lead to build errors on boards like peach-pi_defconfig. Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the functions hw_sha384() and hw_sha512() shall be used to implement the SHA384 and SHA512 algorithms. Fixes: a479f103dc1c ("hash: Allow for SHA512 hardware implementations") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-14 05:08:27 +00:00
This option enables hardware acceleration for the SHA1 and SHA256
hashing algorithms. This affects the 'hash' command and also the
hash_lookup_algo() function.
spl: cypto: Bring back SPL_ versions of SHA Unfortunately these were removed by mistake. This means that adding hash support to SPL brings in all software algorithms, with a substantial increase in code size. The origin of the problem was renaming them to SPL_FIT_xxx and then these were removed altogether in a later commit. Add them back. This aligns with CONFIG_MD5, for example, which has an SPL variant. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: f5bc9c25f31 ("image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx") Fixes: eb5171ddec9 ("common: Remove unused CONFIG_FIT_SHAxxx selectors") Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:17 +00:00
if SPL
config SPL_SHA1
bool "Enable SHA1 support in SPL"
default y if SHA1
help
This option enables support of hashing using SHA1 algorithm.
The hash is calculated in software.
The SHA1 algorithm produces a 160-bit (20-byte) hash value
(digest).
config SPL_SHA256
bool "Enable SHA256 support in SPL"
default y if SHA256
help
This option enables support of hashing using SHA256 algorithm.
The hash is calculated in software.
The SHA256 algorithm produces a 256-bit (32-byte) hash value
(digest).
config SPL_SHA512
bool "Enable SHA512 support in SPL"
default y if SHA512
help
This option enables support of hashing using SHA512 algorithm.
The hash is calculated in software.
The SHA512 algorithm produces a 512-bit (64-byte) hash value
(digest).
config SPL_SHA384
bool "Enable SHA384 support in SPL"
default y if SHA384
select SPL_SHA512
help
This option enables support of hashing using SHA384 algorithm.
The hash is calculated in software. This is also selects SHA512,
because these implementations share the bulk of the code..
The SHA384 algorithm produces a 384-bit (48-byte) hash value
(digest).
hash: Use Kconfig to enable hashing in host tools and SPL At present when building host tools, we force CONFIG_SHAxxx to be enabled regardless of the board Kconfig setting. This is done in the image.h header file. For SPL we currently just assume the algorithm is desired if U-Boot proper enables it. Clean this up by adding new Kconfig options to enable hashing on the host, relying on CONFIG_IS_ENABLED() to deal with the different builds. Add new SPL Kconfigs for hardware-accelerated hashing, to maintain the current settings. This allows us to drop the image.h code and the I_WANT_MD5 hack. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:18 +00:00
config SPL_SHA_HW_ACCEL
bool "Enable hardware acceleration for SHA hash functions"
default y if SHA_HW_ACCEL
help
This option enables hardware acceleration for the SHA1 and SHA256
hashing algorithms. This affects the 'hash' command and also the
hash_lookup_algo() function.
config SPL_SHA_PROG_HW_ACCEL
bool "Enable Progressive hashing support using hardware in SPL"
depends on SHA_PROG_HW_ACCEL
default y
help
This option enables hardware-acceleration for SHA progressive
hashing.
Data can be streamed in a block at a time and the hashing is
performed in hardware.
spl: cypto: Bring back SPL_ versions of SHA Unfortunately these were removed by mistake. This means that adding hash support to SPL brings in all software algorithms, with a substantial increase in code size. The origin of the problem was renaming them to SPL_FIT_xxx and then these were removed altogether in a later commit. Add them back. This aligns with CONFIG_MD5, for example, which has an SPL variant. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: f5bc9c25f31 ("image: Rename SPL_SHAxxx_SUPPORT to SPL_FIT_SHAxxx") Fixes: eb5171ddec9 ("common: Remove unused CONFIG_FIT_SHAxxx selectors") Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:17 +00:00
endif
hash: Kconfig option for SHA512 hardware acceleration Commit a479f103dc1c ("hash: Allow for SHA512 hardware implementations") defined function definitions for hardware accelerated SHA384 and SHA512. If CONFIG_SHA_HW_ACCEL=y, these functions are used. We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the new functions hw_sha384() and hw_sha512(). For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The missing hardware acceleration functions lead to build errors on boards like peach-pi_defconfig. Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the functions hw_sha384() and hw_sha512() shall be used to implement the SHA384 and SHA512 algorithms. Fixes: a479f103dc1c ("hash: Allow for SHA512 hardware implementations") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-14 05:08:27 +00:00
if SHA_HW_ACCEL
config SHA512_HW_ACCEL
bool "Enable hardware acceleration for SHA512"
lib: Drop SHA512_ALGO in lieu of SHA512 SHA512_ALGO was used as a "either SHA512 or SHA384", although the implementations of these two algorithms share a majority of code. From a Kconfig interface perspective, it makes sense to present two distinct options. This requires #ifdefing out the SHA512 implementation from sha512.c. The latter doesn't make any sense. It's reasonable to say in Kconfig that SHA384 depends on SHA512, and seems to be the more polite way to handle the selection. Thus, automatically select SHA512 when SHA384 is enabled. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-03 00:54:18 +00:00
depends on SHA512
hash: Kconfig option for SHA512 hardware acceleration Commit a479f103dc1c ("hash: Allow for SHA512 hardware implementations") defined function definitions for hardware accelerated SHA384 and SHA512. If CONFIG_SHA_HW_ACCEL=y, these functions are used. We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the new functions hw_sha384() and hw_sha512(). For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The missing hardware acceleration functions lead to build errors on boards like peach-pi_defconfig. Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the functions hw_sha384() and hw_sha512() shall be used to implement the SHA384 and SHA512 algorithms. Fixes: a479f103dc1c ("hash: Allow for SHA512 hardware implementations") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-14 05:08:27 +00:00
help
This option enables hardware acceleration for the SHA384 and SHA512
hashing algorithms. This affects the 'hash' command and also the
hash_lookup_algo() function.
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
config SHA_PROG_HW_ACCEL
bool "Enable Progressive hashing support using hardware"
help
hash: Allow for SHA512 hardware implementations Similar to support for SHA1 and SHA256, allow the use of hardware hashing engine by enabling the algorithm and setting CONFIG_SHA_HW_ACCEL / CONFIG_SHA_PROG_HW_ACCEL. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-17 03:20:42 +00:00
This option enables hardware-acceleration for SHA progressive
hashing.
Data can be streamed in a block at a time and the hashing is
performed in hardware.
Kconfig: introduce md5sum command selection So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-15 01:19:05 +00:00
hash: Kconfig option for SHA512 hardware acceleration Commit a479f103dc1c ("hash: Allow for SHA512 hardware implementations") defined function definitions for hardware accelerated SHA384 and SHA512. If CONFIG_SHA_HW_ACCEL=y, these functions are used. We already have boards using CONFIG_SHA_HW_ACCEL=y but none implements the new functions hw_sha384() and hw_sha512(). For implementing the EFI TCG2 protocol we need SHA384 and SHA512. The missing hardware acceleration functions lead to build errors on boards like peach-pi_defconfig. Introduce a new Kconfig symbol CONFIG_SHA512_HW_ACCEL to control if the functions hw_sha384() and hw_sha512() shall be used to implement the SHA384 and SHA512 algorithms. Fixes: a479f103dc1c ("hash: Allow for SHA512 hardware implementations") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-05-14 05:08:27 +00:00
endif
Kconfig: introduce md5sum command selection So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-15 01:19:05 +00:00
config MD5
lib: Allow MD5 to be enabled in SPL At present the MD5 option cannot be enabled by board configs since it has no Kconfig name. It is generally enabled, so long as FIT support is present. But not all boards use FIT, particularly in SPL Fix this and add an option for SPL as well. This allows board code to call md5() even if FIT support is not enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-06 14:03:56 +00:00
bool "Support MD5 algorithm"
help
This option enables MD5 support. MD5 is an algorithm designed
in 1991 that produces a 16-byte digest (or checksum) from its input
data. It has a number of vulnerabilities which preclude its use in
security applications, but it can be useful for providing a quick
checksum of a block of data.
config SPL_MD5
bool "Support MD5 algorithm in SPL"
help
This option enables MD5 support in SPL. MD5 is an algorithm designed
in 1991 that produces a 16-byte digest (or checksum) from its input
data. It has a number of vulnerabilities which preclude its use in
security applications, but it can be useful for providing a quick
checksum of a block of data.
Kconfig: introduce md5sum command selection So far CONFIG_MD5SUM would need to be set by a board's include file. Since the command is really generic, move it over to Kconfig to allow it to be defined by either a board's defconfig, menuconfig or some config snippet merged via mergeconfig.sh. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-03-15 01:19:05 +00:00
image: Use the correct checks for CRC32 Add a host Kconfig for CRC32. With this we can use CONFIG_IS_ENABLED(CRC32) directly in the host build, so drop the unnecessary indirection. Add a few more conditions to SPL_CRC32 to avoid build failures as well as TPL_CRC32. Also update hash.c to make crc32 optional and to actually take notice of SPL_CRC32. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2021-09-26 01:43:24 +00:00
config CRC32
def_bool y
help
Enables CRC32 support in U-Boot. This is normally required.
lib: Add CRC32-C This is needed for BTRFS. Signed-off-by: Marek Behun <marek.behun@nic.cz> create mode 100644 lib/crc32c.c
2017-09-03 15:00:23 +00:00
config CRC32C
bool
lib: Add xxhash support This adds the xxhash support from Linux. Files are almost identical to those added to Linux in commit 5d240522 ("lib: Add xxhash module") (they haven't been touched since in Linux). The only difference is to add some includes to be compatible with U-Boot. Also SPDX lincese tags were added. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-04-29 20:40:43 +00:00
config XXHASH
bool
crypto/fsl - Add progressive hashing support using hardware acceleration. Currently only normal hashing is supported using hardware acceleration. Added support for progressive hashing using hardware. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> CC: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-20 07:21:46 +00:00
endmenu
Add support for LZ4 decompression algorithm This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-07 03:03:53 +00:00
menu "Compression Support"
config LZ4
bool "Enable LZ4 decompression support"
help
If this option is set, support for LZ4 compressed images
is included. The LZ4 algorithm can run in-place as long as the
compressed image is loaded to the end of the output buffer, and
trades lower compression ratios for much faster decompression.
lmb: move MAX_LMB_REGIONS value in Kconfig Move MAX_LMB_REGIONS value in Kconfig, the max number of the regions in lmb library. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:28 +00:00
Add support for LZ4 decompression algorithm This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-07 03:03:53 +00:00
NOTE: This implements the release version of the LZ4 frame
format as generated by default by the 'lz4' command line tool.
This is not the same as the outdated, less efficient legacy
frame format currently (2015) implemented in the Linux kernel
(generated by 'lz4 -l'). The two formats are incompatible.
Convert CONFIG_LZMA to Kconfig This converts the following to Kconfig: CONFIG_LZMA Signed-off-by: Simon Glass <sjg@chromium.org>
2017-05-17 09:25:42 +00:00
config LZMA
bool "Enable LZMA decompression support"
help
This enables support for LZMA (Lempel-Ziv-Markov chain algorithm),
a dictionary compression algorithm that provides a high compression
ratio and fairly fast decompression speed. See also
CONFIG_CMD_LZMADEC which provides a decode command.
cmd: Expose a Kconfig option to enable UBIFS commands Create a new Kconfig entry to allow CMD_UBIFS selection from Kconfig and add an hidden LZO option that can be selected by CMD_UBIFS. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
2017-02-27 17:22:06 +00:00
config LZO
configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-22 22:36:16 +00:00
bool "Enable LZO decompression support"
help
lib: fix typos in Kconfig There are trivial typos in the Kconfig file. Fixed them. Also, fixed grammar in the descriptions with typos. Fixes: d56b4b1974 ("configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS") Fixes: 7264f2928b ("spl: fit: Eanble GZIP support for image decompression") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-01 13:05:08 +00:00
This enables support for the LZO compression algorithm.
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
lib: fdt: Allow LZO and GZIP DT compression in U-Boot Add required Kconfig symbols, Makefile bits and macro fixes in a few places to support LZO and DT compression in U-Boot. This can save a lot of space with multi-DTB fitImages. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-03-08 15:06:55 +00:00
config GZIP
lib: Kconfig: fix help text for GZIP commit 95f4bbd581cf ("lib: fdt: Allow LZO and GZIP DT compression in U-Boot") introduced Kconfig option for gzip in U-Boot, but help text says gzip for SPL, which is wrong. Fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Marek Vasut <marex@denx.de>
2019-04-29 06:59:38 +00:00
bool "Enable gzip decompression support"
lib: fdt: Allow LZO and GZIP DT compression in U-Boot Add required Kconfig symbols, Makefile bits and macro fixes in a few places to support LZO and DT compression in U-Boot. This can save a lot of space with multi-DTB fitImages. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-03-08 15:06:55 +00:00
select ZLIB
default y
help
This enables support for GZIP compression algorithm.
lib: kconfig: Add option to set BZIP2 compression method There is no way to select BZIP2 compression method. Add it under library/compression config where all other compression related configs are present. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-06 00:24:21 +00:00
include/u-boot, lib/zlib: add sources for zlib decompression Add zlib (v1.2.11) uncompr() function to U-Boot. SquashFS depends on this function to decompress data from a raw disk image. The actual support for zlib into SquashFS sources will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-07-30 13:33:49 +00:00
config ZLIB_UNCOMPRESS
bool "Enables zlib's uncompress() functionality"
help
This enables an extra zlib functionality: the uncompress() function,
which decompresses data from a buffer into another, knowing their
sizes. Unlike gunzip(), there is no header parsing.
cmd: zip: automatically pull in gzip() Move the CONFIG_GZIP_COMPRESSED from a config.h macro to a Kconfig menu item. It is not selectable by a user because there is no reason to do so. Instead it will be automatically selected by the stuff which uses gzip(), like the zip command. Remove it from the config_whitelist.txt. Also remove CONFIG_GZIP_COMPRESS_DEF_SZ as this was never used on any board. The default seems to be sane, otherwise it should be added as a Kconfig option. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-05-22 12:07:36 +00:00
config GZIP_COMPRESSED
bool
select ZLIB
lib: kconfig: Add option to set BZIP2 compression method There is no way to select BZIP2 compression method. Add it under library/compression config where all other compression related configs are present. Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-03-06 00:24:21 +00:00
config BZIP2
bool "Enable bzip2 decompression support"
help
This enables support for BZIP2 compression algorithm.
lib: fdt: Allow LZO and GZIP DT compression in U-Boot Add required Kconfig symbols, Makefile bits and macro fixes in a few places to support LZO and DT compression in U-Boot. This can save a lot of space with multi-DTB fitImages. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2019-03-08 15:06:55 +00:00
config ZLIB
bool
default y
help
This enables ZLIB compression lib.
lib: add Zstandard decompression support Add the zstd library from Linux kernel (only decompression support). There are minimal changes to build with U-Boot, otherwise the files are identical to Linux commit dc35da16 from March 2018, the files had not been touched since in kernel. Also SPDX lincese tags were added. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-04-29 20:40:44 +00:00
config ZSTD
bool "Enable Zstandard decompression support"
select XXHASH
help
This enables Zstandard decompression library.
spl: lz4: Allow use of lz4 compression in SPL In some cases U-Boot is compressed and it is useful to be able to decompress it in SPL. Add a Kconfig and Makefile change to allow this. Note that this does not actually implement decompression. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-06 22:21:30 +00:00
config SPL_LZ4
bool "Enable LZ4 decompression support in SPL"
help
kconfig: fix some typos Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-05-26 17:07:15 +00:00
This enables support for the LZ4 decompression algorithm in SPL. LZ4
spl: lz4: Allow use of lz4 compression in SPL In some cases U-Boot is compressed and it is useful to be able to decompress it in SPL. Add a Kconfig and Makefile change to allow this. Note that this does not actually implement decompression. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-11-06 22:21:30 +00:00
is a lossless data compression algorithm that is focused on
fast compression and decompression speed. It belongs to the LZ77
family of byte-oriented compression schemes.
lib: enable lzma decompression support for SPL build This patch enables LZMA decompression support for SPL build Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-21 07:28:38 +00:00
config SPL_LZMA
bool "Enable LZMA decompression support for SPL build"
help
kconfig: fix some typos Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
2020-05-26 17:07:15 +00:00
This enables support for LZMA compression algorithm for SPL boot.
lib: enable lzma decompression support for SPL build This patch enables LZMA decompression support for SPL build Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
2020-04-21 07:28:38 +00:00
lib: allow building lzo for the SPL Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-15 10:57:30 +00:00
config SPL_LZO
bool "Enable LZO decompression support in SPL"
help
This enables support for LZO compression algorithm in the SPL.
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
config SPL_GZIP
bool "Enable gzip decompression support for SPL build"
select SPL_ZLIB
help
lib: fix typos in Kconfig There are trivial typos in the Kconfig file. Fixed them. Also, fixed grammar in the descriptions with typos. Fixes: d56b4b1974 ("configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFS") Fixes: 7264f2928b ("spl: fit: Eanble GZIP support for image decompression") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@foundries.io> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-09-01 13:05:08 +00:00
This enables support for the GZIP compression algorithm for SPL boot.
spl: fit: Eanble GZIP support for image decompression Add Kconfig option SPL_GZIP and SPL_ZLIB to enable gunzip support for SPL boot, eg. falcon boot compressed kernel image. Signed-off-by: York Sun <york.sun@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-08-15 18:14:43 +00:00
config SPL_ZLIB
bool
help
This enables compression lib for SPL boot.
lib: add Zstandard decompression support Add the zstd library from Linux kernel (only decompression support). There are minimal changes to build with U-Boot, otherwise the files are identical to Linux commit dc35da16 from March 2018, the files had not been touched since in kernel. Also SPDX lincese tags were added. Signed-off-by: Marek Behún <marek.behun@nic.cz>
2019-04-29 20:40:44 +00:00
config SPL_ZSTD
bool "Enable Zstandard decompression support in SPL"
select XXHASH
help
This enables Zstandard decompression library in the SPL.
Add support for LZ4 decompression algorithm This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
2015-10-07 03:03:53 +00:00
endmenu
lib: Kconfig: add entry for errno_str() function Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
2015-04-20 18:07:40 +00:00
config ERRNO_STR
bool "Enable function for getting errno-related string message"
help
The function errno_str(int errno), returns a pointer to the errno
corresponding text message:
- if errno is null or positive number - a pointer to "Success" message
- if errno is negative - a pointer to errno related message
lib: Add hexdump Often during debugging session it's very interesting to see what data we were dealing with. For example what we write or read to/from memory or peripherals. This change introduces functions that allow to dump binary data with one simple function invocation like: ------------------->8---------------- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); ------------------->8---------------- which gives us the following: ------------------->8---------------- 00000000: f2 b7 c9 88 62 61 75 64 72 61 74 65 3d 31 31 35 ....baudrate=115 00000010: 32 30 30 00 62 6f 6f 74 61 72 67 73 3d 63 6f 6e 200.bootargs=con 00000020: 73 6f 6c 65 3d 74 74 79 53 33 2c 31 31 35 32 30 sole=ttyS3,11520 00000030: 30 6e 38 00 62 6f 6f 74 64 65 6c 61 79 3d 33 00 0n8.bootdelay=3. 00000040: 62 6f 6f 74 66 69 6c 65 3d 75 49 6d 61 67 65 00 bootfile=uImage. 00000050: 66 64 74 63 6f 6e 74 72 6f 6c 61 64 64 72 3d 39 fdtcontroladdr=9 00000060: 66 66 62 31 62 61 30 00 6c 6f 61 64 61 64 64 72 ffb1ba0.loadaddr 00000070: 3d 30 78 38 32 30 30 30 30 30 30 00 73 74 64 65 =0x82000000.stde 00000080: 72 72 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 rr=serial0@e0022 00000090: 30 30 30 00 73 74 64 69 6e 3d 73 65 72 69 61 6c 000.stdin=serial 000000a0: 30 40 65 30 30 32 32 30 30 30 00 73 74 64 6f 75 0@e0022000.stdou 000000b0: 74 3d 73 65 72 69 61 6c 30 40 65 30 30 32 32 30 t=serial0@e00220 000000c0: 30 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00.............. ... ------------------->8---------------- Source of hexdump.c was copied from Linux kernel v4.7-rc2. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Cc: Stefan Roese <sr@denx.de>
2018-06-05 14:17:57 +00:00
config HEXDUMP
bool "Enable hexdump"
help
This enables functions for printing dumps of binary data.
lib: Allow hexdump to be used in SPL It is sometimes useful to output hex dumps in SPL. Add a config option to allow this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-12 17:13:35 +00:00
config SPL_HEXDUMP
bool "Enable hexdump in SPL"
lib: disable CONFIG_SPL_HEXDUMP by default CONFIG_HEXDUMP is needed to display UEFI variables using 'printenv -e'. Enabling CONFIG_SPL_HEXDUMP only makes sense for debugging purposes. Hence CONFIG_SPL_HEXDUMP should not be enabled by default. The following boards currently have CONFIG_SPL_HEXDUMP=y. This includes boards that don't use SPL at all. axm_defconfig imx8mm-cl-iot-gate_defconfig imx8mm_venice_defconfig imxrt1020-evk_defconfig imxrt1050-evk_defconfig kontron_sl28_defconfig kp_imx53_defconfig lx2160ardb_tfa_stmm_defconfig mt7622_rfb_defconfig octeon_ebb7304_defconfig octeon_nic23_defconfig qemu_arm64_defconfig qemu_arm_defconfig qemu-riscv32_defconfig qemu-riscv32_smode_defconfig qemu-riscv64_defconfig qemu-riscv64_smode_defconfig qemu-x86_64_defconfig qemu-x86_defconfig sandbox64_defconfig sandbox_defconfig stm32mp15_basic_defconfig stm32mp15_trusted_defconfig synquacer_developerbox_defconfig taurus_defconfig xilinx_versal_virt_defconfig The patch only keeps it enabled on sandbox_spl_defconfig Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-07-24 15:35:46 +00:00
depends on SPL && HEXDUMP
lib: Allow hexdump to be used in SPL It is sometimes useful to output hex dumps in SPL. Add a config option to allow this. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-12 17:13:35 +00:00
help
This enables functions for printing dumps of binary data in
SPL.
lib: Add getopt Some commands can get very unweildy if they have too many positional arguments. Adding options makes them easier to read, remember, and understand. This implementation of getopt has been taken from barebox, which has had option support for quite a while. I have made a few modifications to their version, such as the removal of opterr in favor of a separate getopt_silent function. In addition, I have moved all global variables into struct getopt_context. The getopt from barebox also re-orders the arguments passed to it so that non-options are placed last. This allows users to specify options anywhere. For example, `ls -l foo/ -R` would be re-ordered to `ls -l -R foo/` as getopt parsed the options. However, this feature conflicts with the const argv in cmd_tbl->cmd. This was originally added in 54841ab50c ("Make sure that argv[] argument pointers are not modified."). The reason stated in that commit is that hush requires argv to stay unmodified. Has this situation changed? Barebox also uses hush, and does not have this problem. Perhaps we could use their fix? I have assigned maintenance of getopt to Simon Glass, as it is currently only used by the log command. I would also be fine maintaining it. Signed-off-by: Sean Anderson <seanga2@gmail.com>
2020-10-27 23:55:36 +00:00
config GETOPT
bool "Enable getopt"
help
This enables functions for parsing command-line options.
Move CONFIG_OF_LIBFDT to Kconfig Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:42 +00:00
config OF_LIBFDT
bool "Enable the FDT library"
default y if OF_CONTROL
help
This enables the FDT library (libfdt). It provides functions for
accessing binary device tree images in memory, such as adding and
Fix 'notes' typos s/notes/nodes Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-18 15:58:51 +00:00
removing nodes and properties, scanning through the tree and finding
Move CONFIG_OF_LIBFDT to Kconfig Move this option to Kconfig and tidy up existing boards. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:42 +00:00
particular compatible nodes. The library operates on a flattened
version of the device tree.
fdt: Add Kconfig options to control code size For better or worse libfdt recent grew a lot of code that checks the validity of the device tree in great detail. When using unsigned or unverified data this makes things safer, but it does add to code size. Add some controls to select the trade-off between safety and code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-27 15:47:40 +00:00
config OF_LIBFDT_ASSUME_MASK
hex "Mask of conditions to assume for libfdt"
depends on OF_LIBFDT || FIT
default 0
help
Use this to change the assumptions made by libfdt about the
device tree it is working with. A value of 0 means that no assumptions
are made, and libfdt is able to deal with malicious data. A value of
0xff means all assumptions are made and any invalid data may cause
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
libfdt: Add overlay application function The device tree overlays are a good way to deal with user-modifyable boards or boards with some kind of an expansion mechanism where we can easily plug new board in (like the BBB, the Raspberry Pi or the CHIP). Add a new function to merge overlays with a base device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-05 08:26:44 +00:00
config OF_LIBFDT_OVERLAY
bool "Enable the FDT library overlay support"
lib/Kconfig: Mark OF_LIBFDT_OVERLAY as depending on OF_LIBFDT The overlay code is only useful when OF_LIBFDT is set, so mark it as depending on that first. Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-08 12:52:17 +00:00
depends on OF_LIBFDT
configs: TI: Enable FIT Library overlay support Enable the FDT library overlay support for all TI SOC family. Without this option, when Loading fdt from FIT image, the following warning is seen. "config with overlays but CONFIG_OF_LIBFDT_OVERLAY not set". Signed-off-by: Praneeth Bajjuri <praneeth@ti.com> Suggested-by: Andrew F.Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2018-04-25 21:03:23 +00:00
default y if ARCH_OMAP2PLUS || ARCH_KEYSTONE
libfdt: Add overlay application function The device tree overlays are a good way to deal with user-modifyable boards or boards with some kind of an expansion mechanism where we can easily plug new board in (like the BBB, the Raspberry Pi or the CHIP). Add a new function to merge overlays with a base device tree. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-07-05 08:26:44 +00:00
help
This enables the FDT library (libfdt) overlay support.
fdt: Allow libfdt to be used in SPL Add an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL. We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:45 +00:00
config SPL_OF_LIBFDT
bool "Enable the FDT library for SPL"
default y if SPL_OF_CONTROL
help
This enables the FDT library (libfdt). It provides functions for
accessing binary device tree images in memory, such as adding and
Fix 'notes' typos s/notes/nodes Signed-off-by: Anatolij Gustschin <agust@denx.de>
2017-08-18 15:58:51 +00:00
removing nodes and properties, scanning through the tree and finding
fdt: Allow libfdt to be used in SPL Add an option to enable libfdt in SPL. This can be useful when decoding FIT files in SPL. We need to make sure this option is not enabled in SPL by this change. Also this option needs to be enabled in host builds. Si add a new IMAGE_USE_LIBFDT #define which can be used in files that are built on the host but must also build for U-Boot and SPL. Signed-off-by: Simon Glass <sjg@chromium.org>
2016-02-23 05:55:45 +00:00
particular compatible nodes. The library operates on a flattened
version of the device tree.
fdt: Add Kconfig options to control code size For better or worse libfdt recent grew a lot of code that checks the validity of the device tree in great detail. When using unsigned or unverified data this makes things safer, but it does add to code size. Add some controls to select the trade-off between safety and code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-27 15:47:40 +00:00
config SPL_OF_LIBFDT_ASSUME_MASK
hex "Mask of conditions to assume for libfdt"
depends on SPL_OF_LIBFDT || FIT
default 0xff
help
Use this to change the assumptions made by libfdt in SPL about the
device tree it is working with. A value of 0 means that no assumptions
are made, and libfdt is able to deal with malicious data. A value of
0xff means all assumptions are made and any invalid data may cause
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
fdt: Allow libfdt in TPL In some cases (e.g. sandbox with verified boot) it is useful to support libfdt in TPL. Update the Kconfig to handle this. Signed-off-by: Simon Glass <sjg@chromium.org>
2018-10-01 18:22:21 +00:00
config TPL_OF_LIBFDT
bool "Enable the FDT library for TPL"
default y if TPL_OF_CONTROL
help
This enables the FDT library (libfdt). It provides functions for
accessing binary device tree images in memory, such as adding and
removing nodes and properties, scanning through the tree and finding
particular compatible nodes. The library operates on a flattened
version of the device tree.
fdt: Add Kconfig options to control code size For better or worse libfdt recent grew a lot of code that checks the validity of the device tree in great detail. When using unsigned or unverified data this makes things safer, but it does add to code size. Add some controls to select the trade-off between safety and code size. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2019-10-27 15:47:40 +00:00
config TPL_OF_LIBFDT_ASSUME_MASK
hex "Mask of conditions to assume for libfdt"
depends on TPL_OF_LIBFDT || FIT
default 0xff
help
Use this to change the assumptions made by libfdt in TPL about the
device tree it is working with. A value of 0 means that no assumptions
are made, and libfdt is able to deal with malicious data. A value of
0xff means all assumptions are made and any invalid data may cause
unsafe execution. See FDT_ASSUME_PERFECT, etc. in libfdt_internal.h
spl: move FDT_FIXUP_PARTITIONS to Kconfig Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-06 05:31:45 +00:00
config FDT_FIXUP_PARTITIONS
bool "overwrite MTD partitions in DTS through defined in 'mtdparts'"
depends on OF_LIBFDT
fdt_support: make FDT_FIXUP_PARTITIONS depend on CMD_MTDPARTS fdt_fixup_mtdparts() calls mtdparts_init() and device_find(), which are defined in cmd/mtdparts.c The combination of FDT_FIXUP_PARTITIONS=y and CMD_MTDPARTS=n emits the following link error: common/fdt_support.c:903: undefined reference to `mtdparts_init' common/fdt_support.c:914: undefined reference to `device_find' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-07-20 02:04:09 +00:00
depends on CMD_MTDPARTS
spl: move FDT_FIXUP_PARTITIONS to Kconfig Move FDT_FIXUP_PARTITIONS to Kconfig and cleanup existing uses. Signed-off-by: Heiko Schocher <hs@denx.de>
2016-10-06 05:31:45 +00:00
help
Allow overwriting defined partitions in the device tree blob
using partition info defined in the 'mtdparts' environment
variable.
x86: Move smbios generation into arch independent directory We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:23 +00:00
menu "System tables"
smbios: Expose in efi_loader as table We can pass SMBIOS easily as EFI configuration table to an EFI payload. This patch adds enablement for that case. While at it, we also enable SMBIOS generation for ARM systems, since they support EFI_LOADER. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:29 +00:00
depends on (!EFI && !SYS_COREBOOT) || (ARM && EFI_LOADER)
x86: Move smbios generation into arch independent directory We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:23 +00:00
x86: Allow putting some tables in the bloblist At present all tables are placed starting at address f0000 in memory, and can be up to 64KB in size. If the tables are very large, this may not provide enough space. Also if the tables point to other tables (such as console log or a ramoops area) then we must allocate other memory anyway. The bloblist is a nice place to put these tables since it is contiguous, which makes it easy to reserve this memory for linux using the 820 tables. Add an option to put some of the tables in the bloblist. For SMBIOS and ACPI, create suitable pointers from the f0000 region to the new location of the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: squashed in http://patchwork.ozlabs.org/project/uboot/patch/ 20201105062407.1.I8091ad931cbbb5e3b6f6ababdf3f8d5db0d17bb9@changeid/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-04 16:57:25 +00:00
config BLOBLIST_TABLES
bool "Put tables in a bloblist"
bloblist: Make BLOBLIST_TABLES depend on BLOBLIST Add an extra condition here since we cannot put x86 tables in a bloblist when bloblists are not supported. Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-15 05:11:22 +00:00
depends on X86 && BLOBLIST
x86: Allow putting some tables in the bloblist At present all tables are placed starting at address f0000 in memory, and can be up to 64KB in size. If the tables are very large, this may not provide enough space. Also if the tables point to other tables (such as console log or a ramoops area) then we must allocate other memory anyway. The bloblist is a nice place to put these tables since it is contiguous, which makes it easy to reserve this memory for linux using the 820 tables. Add an option to put some of the tables in the bloblist. For SMBIOS and ACPI, create suitable pointers from the f0000 region to the new location of the tables. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: squashed in http://patchwork.ozlabs.org/project/uboot/patch/ 20201105062407.1.I8091ad931cbbb5e3b6f6ababdf3f8d5db0d17bb9@changeid/] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-04 16:57:25 +00:00
help
Normally tables are placed at address 0xf0000 and can be up to 64KB
long. With this option, tables are instead placed in the bloblist
with a pointer from 0xf0000. The size can then be larger and the
tables can be placed high in memory.
x86: Move smbios generation into arch independent directory We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:23 +00:00
config GENERATE_SMBIOS_TABLE
bool "Generate an SMBIOS (System Management BIOS) table"
default y
smbios: Expose in efi_loader as table We can pass SMBIOS easily as EFI configuration table to an EFI payload. This patch adds enablement for that case. While at it, we also enable SMBIOS generation for ARM systems, since they support EFI_LOADER. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:29 +00:00
depends on X86 || EFI_LOADER
x86: Move smbios generation into arch independent directory We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:23 +00:00
help
The System Management BIOS (SMBIOS) specification addresses how
motherboard and system vendors present management information about
their products in a standard format by extending the BIOS interface
on Intel architecture systems.
Check http://www.dmtf.org/standards/smbios for details.
sysinfo: Provide a default driver to set SMBIOS values Some boards want to specify the manufacturer or product name but do not need to have their own sysinfo driver. Add a default driver which provides a way to specify this SMBIOS information in the devicetree, without needing any board-specific functionality. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-05 13:32:11 +00:00
See also SMBIOS_SYSINFO which allows SMBIOS values to be provided in
the devicetree.
lib: rational: copy the rational fraction lib routines from Linux Copy the best rational approximation calculation routines from Linux. Typical usecase for these routines is to calculate the M/N divider values for PLLs to reach a specific clock rate. This is based on linux kernel commit: "lib/math/rational.c: fix possible incorrect result from rational fractions helper" (sha1: 323dd2c3ed0641f49e89b4e420f9eef5d3d5a881) Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-11 08:45:02 +00:00
config LIB_RATIONAL
bool "enable continued fraction calculation routines"
config SPL_LIB_RATIONAL
bool "enable continued fraction calculation routines for SPL"
depends on SPL
x86: Move smbios generation into arch independent directory We will need the SMBIOS generation function on ARM as well going forward, so let's move it into a non arch specific location. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-08-18 23:23:23 +00:00
endmenu
cmd: add asn1_compiler Imported from linux kernel v5.3: asn1.h without changes asn1_ber_bytecode.h without changes asn1_decoder.h without changes asn1_compiler.c without changes This host command will be used to create a ASN1 parser, for example, for pkcs7 messages or x509 certificates. More specifically, it will generate *byte code* which will be interpreted by asn1 decoder library. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-11-13 00:44:53 +00:00
config ASN1_COMPILER
bool
lib: add asn1 decoder Imported from linux kernel v5.3: lib/asn1_decoder.c with changes marked as __UBOOT__ Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-11-13 00:44:55 +00:00
config ASN1_DECODER
bool
help
Enable asn1 decoder library.
lib: add oid registry utility Imported from linux kernel v5.3: build_OID_registry without changes oid_registry.h without changes oid_registry.c with changes marked as __UBOOT__ Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-11-13 00:44:57 +00:00
config OID_REGISTRY
bool
help
Enable fast lookup object identifier registry.
smbios: add parsing API Add a very simple API to be able to access SMBIOS strings like vendor, model and bios version. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-11-03 14:34:51 +00:00
config SMBIOS_PARSER
bool "SMBIOS parser"
help
A simple parser for SMBIOS data.
efi: Add start-up library code When running as an EFI application, U-Boot must request memory from EFI, and provide access to the boot services U-Boot needs. Add library code to perform these tasks. This includes efi_main() which is the entry point from EFI. U-Boot is built as a shared library. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-31 15:31:36 +00:00
source lib/efi/Kconfig
efi_loader: hook up in build environment Now that we have all the bits and pieces ready for EFI payload loading support, hook them up in Makefiles and KConfigs so that we can build. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> [trini: Enable only when we of OF_LIBFDT, disable on kwb and colibri_pxa270] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-03-04 00:10:07 +00:00
source lib/efi_loader/Kconfig
optee: Add lib entries for sharing OPTEE code across ports This patch adds code to lib to enable sharing of useful OPTEE code between board-ports and architectures. The code on lib/optee/optee.c comes from the TI omap2 port. Eventually the OMAP2 code will be patched to include the shared code. The intention here is to add more useful OPTEE specific code as more functionality gets added. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Harinarayan Bhatta <harinarayan@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Peng Fan <peng.fan@nxp.com> Tested-by: Peng Fan <peng.fan@nxp.com>
2018-03-13 16:50:27 +00:00
source lib/optee/Kconfig
efi: Add start-up library code When running as an EFI application, U-Boot must request memory from EFI, and provide access to the boot services U-Boot needs. Add library code to perform these tasks. This includes efi_main() which is the entry point from EFI. U-Boot is built as a shared library. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-31 15:31:36 +00:00
fdtdec: Add Kconfig symbol for tests Runtime tests are provided as a test_fdtdec command implementation. Add a Kconfig symbol that allows this command to be built so that the tests can be used. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-03-21 18:10:04 +00:00
config TEST_FDTDEC
bool "enable fdtdec test"
depends on OF_LIBFDT
rtc: move date.c from drivers/rtc/ to lib/ In the next commit, rtc_mktime(), for compatibility with linux, will be implemented using rtc_mktime(), which is no longer drivers/rtc specific. So move this file under lib/. Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
2019-11-13 00:44:49 +00:00
config LIB_DATE
bool
lib: elf: Move the generic elf loading/validating functions to lib Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-12 08:25:03 +00:00
config LIB_ELF
bool
help
lib: cosmetic update of CONFIG_LIB_ELF description Change 2 typo error in CONFIG_LIB_ELF description: - Supoort => Support - fir => for Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2021-01-04 14:33:28 +00:00
Support basic elf loading/validating functions.
This supports for 32 bit and 64 bit versions.
lib: elf: Move the generic elf loading/validating functions to lib Move the generic elf loading/validating functions to lib/ so that they can be re-used and accessed by code existing outside cmd. While at it remove the duplicate static version of load_elf_image_phdr under arch/arm/mach-imx/imx_bootaux.c. Signed-off-by: Keerthy <j-keerthy@ti.com> Suggested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2020-02-12 08:25:03 +00:00
lmb: move CONFIG_LMB in Kconfig Migrate CONFIG_LMB in Kconfig. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:25 +00:00
config LMB
bool "Enable the logical memory blocks library (lmb)"
default y if ARC || ARM || M68K || MICROBLAZE || MIPS || NDS32 || \
NIOS2 || PPC || RISCV || SANDBOX || SH || X86 || XTENSA
help
Support the library logical memory blocks.
lmb: Add 2 config to define the max number of regions Add 2 configs CONFIG_LMB_MEMORY_REGIONS and CONFIG_LMB_RESERVED_REGIONS to change independently the max number of the regions in lmb library. When CONFIG_LMB_USE_MAX_REGIONS=y, move the lmb property arrays to struct lmb and manage the array size with the element 'max' of struct lmb_region; their are still allocated in stack. When CONFIG_LMB_USE_MAX_REGIONS=n, keep the current location in struct lmb_region to allow compiler optimization. Increase CONFIG_LMB_RESERVED_REGIONS is useful to avoid lmb errors in bootm when the number of reserved regions (not adjacent) is reached: + 1 region for relocated U-Boot + 1 region for initrd + 1 region for relocated linux device tree + reserved memory regions present in Linux device tree. The current limit of 8 regions is reached with only 5 reserved regions in DT. see Linux kernel commit bf23c51f1f49 ("memblock: Move memblock arrays to static storage in memblock.c and make their size a variable") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:31 +00:00
config LMB_USE_MAX_REGIONS
lmb: fix typo 'commun' %s/commun/common/ Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2021-11-14 08:38:53 +00:00
bool "Use a common number of memory and reserved regions in lmb lib"
lmb: Add 2 config to define the max number of regions Add 2 configs CONFIG_LMB_MEMORY_REGIONS and CONFIG_LMB_RESERVED_REGIONS to change independently the max number of the regions in lmb library. When CONFIG_LMB_USE_MAX_REGIONS=y, move the lmb property arrays to struct lmb and manage the array size with the element 'max' of struct lmb_region; their are still allocated in stack. When CONFIG_LMB_USE_MAX_REGIONS=n, keep the current location in struct lmb_region to allow compiler optimization. Increase CONFIG_LMB_RESERVED_REGIONS is useful to avoid lmb errors in bootm when the number of reserved regions (not adjacent) is reached: + 1 region for relocated U-Boot + 1 region for initrd + 1 region for relocated linux device tree + reserved memory regions present in Linux device tree. The current limit of 8 regions is reached with only 5 reserved regions in DT. see Linux kernel commit bf23c51f1f49 ("memblock: Move memblock arrays to static storage in memblock.c and make their size a variable") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:31 +00:00
depends on LMB
default y
help
Define the number of supported memory regions in the library logical
memory blocks.
This feature allow to reduce the lmb library size by using compiler
optimization when LMB_MEMORY_REGIONS == LMB_RESERVED_REGIONS.
lmb: move MAX_LMB_REGIONS value in Kconfig Move MAX_LMB_REGIONS value in Kconfig, the max number of the regions in lmb library. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:28 +00:00
config LMB_MAX_REGIONS
int "Number of memory and reserved regions in lmb lib"
lmb: Add 2 config to define the max number of regions Add 2 configs CONFIG_LMB_MEMORY_REGIONS and CONFIG_LMB_RESERVED_REGIONS to change independently the max number of the regions in lmb library. When CONFIG_LMB_USE_MAX_REGIONS=y, move the lmb property arrays to struct lmb and manage the array size with the element 'max' of struct lmb_region; their are still allocated in stack. When CONFIG_LMB_USE_MAX_REGIONS=n, keep the current location in struct lmb_region to allow compiler optimization. Increase CONFIG_LMB_RESERVED_REGIONS is useful to avoid lmb errors in bootm when the number of reserved regions (not adjacent) is reached: + 1 region for relocated U-Boot + 1 region for initrd + 1 region for relocated linux device tree + reserved memory regions present in Linux device tree. The current limit of 8 regions is reached with only 5 reserved regions in DT. see Linux kernel commit bf23c51f1f49 ("memblock: Move memblock arrays to static storage in memblock.c and make their size a variable") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:31 +00:00
depends on LMB && LMB_USE_MAX_REGIONS
lmb: move MAX_LMB_REGIONS value in Kconfig Move MAX_LMB_REGIONS value in Kconfig, the max number of the regions in lmb library. Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:28 +00:00
default 8
help
Define the number of supported regions, memory and reserved, in the
library logical memory blocks.
lmb: Add 2 config to define the max number of regions Add 2 configs CONFIG_LMB_MEMORY_REGIONS and CONFIG_LMB_RESERVED_REGIONS to change independently the max number of the regions in lmb library. When CONFIG_LMB_USE_MAX_REGIONS=y, move the lmb property arrays to struct lmb and manage the array size with the element 'max' of struct lmb_region; their are still allocated in stack. When CONFIG_LMB_USE_MAX_REGIONS=n, keep the current location in struct lmb_region to allow compiler optimization. Increase CONFIG_LMB_RESERVED_REGIONS is useful to avoid lmb errors in bootm when the number of reserved regions (not adjacent) is reached: + 1 region for relocated U-Boot + 1 region for initrd + 1 region for relocated linux device tree + reserved memory regions present in Linux device tree. The current limit of 8 regions is reached with only 5 reserved regions in DT. see Linux kernel commit bf23c51f1f49 ("memblock: Move memblock arrays to static storage in memblock.c and make their size a variable") Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
2021-03-10 09:16:31 +00:00
config LMB_MEMORY_REGIONS
int "Number of memory regions in lmb lib"
depends on LMB && !LMB_USE_MAX_REGIONS
default 8
help
Define the number of supported memory regions in the library logical
memory blocks.
The minimal value is CONFIG_NR_DRAM_BANKS.
config LMB_RESERVED_REGIONS
int "Number of reserved regions in lmb lib"
depends on LMB && !LMB_USE_MAX_REGIONS
default 8
help
Define the number of supported reserved regions in the library logical
memory blocks.
fdt: Use phandle to distinguish DT nodes with same name While assigning the sequence number to subsystem instances by reading the aliases property, only DT nodes names are compared and not the complete path. This causes a problem when there are two DT nodes with same name but have different paths. In arch/arm/dts/k3-am65-main.dtsi there are two USB controllers with the same device tree node name but different path. When aliases are defined for these USB controllers then fdtdec_get_alias_seq() fails to pick the correct instance for a given index. fdt_path_offset() function is slow and this would effect the U-Boot startup. To avert the time penalty on all boards, apply this extra check only when required by using a config option. Fix it by comparing the phandles of DT nodes after the node names match, under a config option. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org> Fix whitespace error in Kconfig: Signed-off-by: Simon Glass <sjg@chromium.org>
2020-12-03 05:25:45 +00:00
config PHANDLE_CHECK_SEQ
bool "Enable phandle check while getting sequence number"
help
When there are multiple device tree nodes with same name,
enable this config option to distinguish them using
phandles in fdtdec_get_alias_seq() function.
lib: Kconfig: fix PHANDLE_CHECK_SEQ position outside of menu CONFIG_PHANDLE_CHECK_SEQ is outside of the menu 'Library routines' thus it's invisible in menuconfig and cannot be selected. Fix this by moving the 'endmenu' after the PHANDLE_CHECK_SEQ definition Fixes: c589132a1d ("fdt: Use phandle to distinguish DT nodes with same name") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2022-01-04 16:20:19 +00:00
endmenu
Reference in New Issue Copy Permalink