leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
81616cec1e
u-boot/configs/pine_h64_defconfig

25 lines
605 B
Plaintext
Raw Normal View History

sunxi: add support for Pine H64 board Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-21 08:20:32 +00:00
CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2021-06-28 14:17:29 +00:00
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-08 01:40:14 +00:00
CONFIG_SPL=y
sunxi: add support for Pine H64 board Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-21 08:20:32 +00:00
CONFIG_MACH_SUN50I_H6=y
sunxi: H6: move LPDDR3 timing definition into separate file Currently the H6 DRAM driver only supports one kind of LPDDR3 DRAM. Split the timing parameters for this LPDDR3 configuration into a separate file, to allow selecting an alternative later at compile time (as the sunxi-dw driver does). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-07-15 01:27:06 +00:00
CONFIG_SUNXI_DRAM_H6_LPDDR3=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-10-29 14:48:01 +00:00
CONFIG_MACPWR="PC16"
sunxi: add support for Pine H64 board Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-21 08:20:32 +00:00
CONFIG_MMC0_CD_PIN="PF6"
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USB3_VBUS_PIN="PL5"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 20:15:47 +00:00
CONFIG_SPL_SPI_SUNXI=y
sunxi: add support for Pine H64 board Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
2018-07-21 08:20:32 +00:00
# CONFIG_PSCI_RESET is not set
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 12:46:52 +00:00
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
sunxi: defconfig: enable eMMC boot partition support Now that the SPL can safely detect whether it was loaded from an eMMC boot partition or the normal user data partition, let's enable this feature on some boards that feature eMMC storage. That covers the boards where I could test this on, and allows the same build to be written to an SD card, eMMC user partition, eMMC boot partition, or into SPI NOR flash. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-12 10:06:51 +00:00
CONFIG_SUPPORT_EMMC_BOOT=y
sunxi: boards: Enable SPI flash support in U-Boot proper Some sunxi boards ship with SPI flash, which allows booting through the BootROM. We cover this functionality by a separate SPL "mini" driver. Separately we have a proper DM_SPI driver for U-Boot proper, which provides access to the SPI flash through the "sf" command. That allows to update the firmware on the SPI flash, also to store the environment there. However only very few boards actually enable support for U-Boot proper, even though that would work and the SPL part is configured. Use the cleaned up configuration scheme to enable SPI flash on those boards which mention a SPI flash in their .dts, or which use the SPL SPI support. Out of the box this would enable storing the environment on the SPI flash, and allows people to read or write the flash from U-Boot, for instance to update the SPI flash when booted via an SD card. For this to actually work there must be a "spi0" alias in the DT, which most boards are missing. But this should be addressed separately. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:06 +00:00
CONFIG_SPI_FLASH_WINBOND=y
sunxi: H6: Enable Ethernet on the Pine H64 Now that the EMAC driver supports the H6 SoC, we can enable the Ethernet hardware on the Pine H64 board. Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2020-05-07 23:10:52 +00:00
CONFIG_SUN8I_EMAC=y
configs: Enable USB3 on Allwinner H6 boards Pine H64 and Orange Pi 3 both provide a USB3 type A port. Enable it in U-Boot. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-05 12:29:04 +00:00
CONFIG_PHY_SUN50I_USB3=y
sunxi: boards: Enable SPI flash support in U-Boot proper Some sunxi boards ship with SPI flash, which allows booting through the BootROM. We cover this functionality by a separate SPL "mini" driver. Separately we have a proper DM_SPI driver for U-Boot proper, which provides access to the SPI flash through the "sf" command. That allows to update the firmware on the SPI flash, also to store the environment there. However only very few boards actually enable support for U-Boot proper, even though that would work and the SPL part is configured. Use the cleaned up configuration scheme to enable SPI flash on those boards which mention a SPI flash in their .dts, or which use the SPL SPI support. Out of the box this would enable storing the environment on the SPI flash, and allows people to read or write the flash from U-Boot, for instance to update the SPI flash when booted via an SD card. For this to actually work there must be a "spi0" alias in the DT, which most boards are missing. But this should be addressed separately. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2022-01-11 12:46:06 +00:00
CONFIG_SPI=y
configs: Enable USB3 on Allwinner H6 boards Pine H64 and Orange Pi 3 both provide a USB3 type A port. Enable it in U-Boot. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-05 12:29:04 +00:00
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
sunxi: H6: Enable USB for existing boards So far USB was not enabled for the Allwinner H6 boards, as the PHY driver was not ready and the clock gates were missing. Since this is now fixed, let's add the PHY and the OHCI/EHCI drivers to the build, for all existing H6 boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64 Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
2019-06-23 14:09:50 +00:00
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
configs: Enable USB3 on Allwinner H6 boards Pine H64 and Orange Pi 3 both provide a USB3 type A port. Enable it in U-Boot. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2021-07-05 12:29:04 +00:00
CONFIG_USB_DWC3=y
# CONFIG_USB_DWC3_GADGET is not set
Reference in New Issue Copy Permalink