u-boot/include/configs/xilinx-ppc440-generic.h

/*
 * (C) Copyright 2008
 *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
 *  This work has been supported by: QTechnology  http://qtec.com/
 *  This program is free software: you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation, either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *  You should have received a copy of the GNU General Public License
 *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef __CONFIG_H
#define __CONFIG_H

/*CPU*/
#define CONFIG_440			1
#define CONFIG_XILINX_PPC440_GENERIC	1
#include "../board/xilinx/ppc440-generic/xparameters.h"

/*Mem Map*/
#define CFG_SDRAM_SIZE_MB	256

/*Env*/
#define	CFG_ENV_IS_IN_FLASH	1
#define	CFG_ENV_SIZE		0x20000
#define	CFG_ENV_SECT_SIZE	0x20000
#define CFG_ENV_OFFSET		0x340000
#define CFG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)

/*Misc*/
#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt    */
#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"

/*Flash*/
#define	CFG_FLASH_SIZE		(32*1024*1024)
#define	CFG_MAX_FLASH_SECT	259
#define MTDIDS_DEFAULT		"nor0=ml507-flash"
#define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"

/*Generic Configs*/
#include <configs/xilinx-ppc440.h>

#endif						/* __CONFIG_H */
ppc44x: Unification of virtex5 pp440 boards This patch provides an unificated way of handling xilinx v5 ppc440 boards. It unificates 3 different things: 1) Source code A new board called ppc440-generic has been created. This board includes a generic tlb initialization (Maps the whole memory into virtual) and defines board_pre_init, checkboard, initdram and get_sys_info weakly, so, they can be replaced by specific functions. If a new board needs to redefine any of the previous functions (specific initialization) it can create a new directory with the specific initializations needed. (see the example ml507 board). 2) Configuration file Common configurations are located under configs/xilinx-ppc440.h, this header file interpretes the xparameters file generated by EDK and configurates u-boot in correspondence. Example: if there is a Temac, allows CMD_CONFIG_NET Specific configuration are located under specific configuration file. (see the example ml507 board) 3) Makefile Some work has been done in order to not duplicate work in the Main Makefile. Please see the attached code. In order to support new boards they can be implemented in the next way: a) Simple Generic Board (90% of the time) Using EDK generates a new xparameters.h file, replace ppc440-generic/xparameters.h and run make xilinx-ppc440-generic_config && make b) Simple Boards with special u-boot parameters (9 % of the time) Create a new file under configs for it (use ml507.h as example) and change your paramaters. Create a new Makefile paragraph and compile c) Complex boards (1% of the time) Create a new folder for the board, like the ml507 Finally, it adds support for the Avnet FX30T Evaluation board, following the new generic structure: Cheap board by Avnet for evaluating the Virtex5 FX technology. This patch adds support for: - UartLite - 16MB Flash - 64MB RAM Prior using U-boot in this board, read carefully the ERRATA by Avnet to solve some memory initialization issues. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de> 2008-09-01 17:09:39 +00:00			`/*`
			`* (C) Copyright 2008`
			`* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es`
			`* This work has been supported by: QTechnology http://qtec.com/`
			`* This program is free software: you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License as published by`
			`* the Free Software Foundation, either version 2 of the License, or`
			`* (at your option) any later version.`
			`*`
			`* This program is distributed in the hope that it will be useful,`
			`* but WITHOUT ANY WARRANTY; without even the implied warranty of`
			`* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
			`* GNU General Public License for more details.`
			`* You should have received a copy of the GNU General Public License`
			`* along with this program. If not, see <http://www.gnu.org/licenses/>.`
			`*/`

			`#ifndef __CONFIG_H`
			`#define __CONFIG_H`

			`/CPU/`
			`#define CONFIG_440 1`
			`#define CONFIG_XILINX_PPC440_GENERIC 1`
			`#include "../board/xilinx/ppc440-generic/xparameters.h"`

			`/Mem Map/`
			`#define CFG_SDRAM_SIZE_MB 256`

			`/Env/`
			`#define CFG_ENV_IS_IN_FLASH 1`
			`#define CFG_ENV_SIZE 0x20000`
			`#define CFG_ENV_SECT_SIZE 0x20000`
			`#define CFG_ENV_OFFSET 0x340000`
			`#define CFG_ENV_ADDR (XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)`

			`/Misc/`
			`#define CFG_PROMPT "board:/# " /* Monitor Command Prompt */`
			`#define CONFIG_PREBOOT "echo U-Boot is up and runnining;"`

			`/Flash/`
			`#define CFG_FLASH_SIZE (3210241024)`
			`#define CFG_MAX_FLASH_SECT 259`
			`#define MTDIDS_DEFAULT "nor0=ml507-flash"`
			`#define MTDPARTS_DEFAULT "mtdparts=ml507-flash:-(user)"`

			`/Generic Configs/`
			`#include <configs/xilinx-ppc440.h>`

			`#endif /* __CONFIG_H */`