leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5d7f601480
u-boot/arch/Kconfig.nxp

221 lines
5.7 KiB
Plaintext
Raw Normal View History

arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
config NXP_ESBC
bool "NXP ESBC (secure boot) functionality"
help
Enable Freescale Secure Boot feature. Normally selected by defconfig.
If unsure, do not change.
menu "Chain of trust / secure boot options"
freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2019-11-07 16:11:32 +00:00
depends on !FIT_SIGNATURE && NXP_ESBC
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
config CHAIN_OF_TRUST
Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigs In some cases this is absolutely required, so select this for some secure features. This also requires migration of RSA_FREESCALE_EXP Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Saksham Jain <saksham.jain@nxp.freescale.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-01 21:51:58 +00:00
select FSL_CAAM
secure boot: enable ARCH_MISC_INIT config. add ARCH_MISC_INIT to initilaize caam jr driver. Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-06-09 11:02:15 +00:00
select ARCH_MISC_INIT
Convert CONFIG_SYS_FSL_SEC_MON et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_FSL_SEC_MON CONFIG_SYS_FSL_SEC_MON_BE CONFIG_SYS_FSL_SEC_MON_LE Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:39 +00:00
select FSL_SEC_MON
Convert CONFIG_SPL_BOARD_INIT to Kconfig This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-03 09:13:32 +00:00
select SPL_BOARD_INIT if (ARM && SPL)
common/spl: Drop [ST]PL_HASH_SUPPORT in favor of [ST]PL_HASH All of these configs exist. Stick to using CONFIG_[ST]PL_HASH, and drop all references to CONFIG_[ST]PL_HASH_SUPPORT. This means we need for CHAIN_OF_TRUST to select SPL_HASH now. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [trini: Add TPL case, fix CHAIN_OF_TRUST, other tweaks] Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-03 00:54:19 +00:00
select SPL_HASH if (ARM && SPL)
lib: move hash CONFIG options to Kconfig Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support using hardware acceleration.") created entries for CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL. However, no defconfig has migrated to it. Complete the move by first adding additional logic to various Kconfig files to select this when required and then use the moveconfig tool. In many cases we can select these because they are required to implement other drivers. We also correct how we include the various hashing algorithms in SPL. This commit was generated as follows (after Kconfig additions): [1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL [2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL Note: We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously because there is dependency between them. Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-05-15 16:17:49 +00:00
select SHA_HW_ACCEL
select SHA_PROG_HW_ACCEL
Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-07-24 03:19:39 +00:00
select ENV_IS_NOWHERE
configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITE As part of chain of trust with confidentiality along with distro boot, linux kernel image needs to be stored in encrypted form on ext4 boot partition. So enable CONFIG_CMD_EXT4_WRITE in case of Secure boot on ARM based platforms. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-08 19:57:46 +00:00
select CMD_EXT4 if ARM
select CMD_EXT4_WRITE if ARM
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
imply CMD_BLOB
imply CMD_HASH if ARM
def_bool y
Convert CONFIG_CMD_ESBC_VALIDATE to Kconfig This converts the following to Kconfig: CONFIG_CMD_ESBC_VALIDATE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:16 +00:00
config CMD_ESBC_VALIDATE
bool "Enable the 'esbc_validate' and 'esbc_halt' commands"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
default y
Convert CONFIG_CMD_ESBC_VALIDATE to Kconfig This converts the following to Kconfig: CONFIG_CMD_ESBC_VALIDATE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2017-05-17 09:25:16 +00:00
help
This option enables two commands used for secure booting:
esbc_validate - validate signature using RSA verification
esbc_halt - put the core in spin loop (Secure Boot Only)
Kconfig: Add LTC3882 voltage regulator config Adds below LTC3882 voltage regulator config: CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:43:04 +00:00
Convert CONFIG_ESBC_HDR_LS et al to Kconfig This converts the following to Kconfig: CONFIG_ESBC_HDR_LS CONFIG_ESBC_ADDR_64BIT Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:37 +00:00
config ESBC_HDR_LS
bool
config ESBC_ADDR_64BIT
def_bool y
depends on ESBC_HDR_LS && FSL_LAYERSCAPE
help
For Layerscape based platforms, ESBC image Address in Header is 64bit.
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
config SYS_FSL_SFP_BE
def_bool y
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
depends on PPC || FSL_LSCH2 || ARCH_LS1021A
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
config SYS_FSL_SFP_LE
def_bool y
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
depends on !SYS_FSL_SFP_BE
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
choice
prompt "SFP IP revision"
default SYS_FSL_SFP_VER_3_0 if PPC
default SYS_FSL_SFP_VER_3_4
config SYS_FSL_SFP_VER_3_0
bool "SFP version 3.0"
config SYS_FSL_SFP_VER_3_2
bool "SFP version 3.2"
config SYS_FSL_SFP_VER_3_4
bool "SFP version 3.4"
endchoice
fsl_validate: Migrate SPL_UBOOT_KEY_HASH to Kconfig Move setting of SPL_UBOOT_KEY_HASH to a non-NULL value to Kconfig. As part of this, change fsl_secboot_validate(...) to check that it is passed a non-empty string, rather than non-NULL. Cc: Peng Fan <peng.fan@nxp.com> Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Kshitiz Varshney <kshitiz.varshney@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:32 +00:00
config SPL_UBOOT_KEY_HASH
string "Non-SRK key hash for U-Boot public/private key pair"
depends on SPL
default ""
help
Set the key hash for U-Boot here if public/private key pair used to
sign U-boot are different from the SRK hash put in the fuse. Example
of a key hash is
41066b564c6ffcef40ccbc1e0a5d0d519604000c785d97bbefd25e4d288d1c8b.
Otherwise leave this empty.
powerpc: Clean up CHAIN_OF_TRUST related options As things stand currently, there is only one PowerPC platform that enables the options for CHAIN_OF_TRUST. From the board header files, remove a number of never-set options. Remove board specific values from arch/powerpc/include/asm/fsl_secure_boot.h as well. Rework include/config_fsl_chain_trust.h to not abuse the CONFIG namespace for constructing CHAIN_BOOT_CMD. Migrate all of the configurable addresses to Kconfig. If any platforms are re-introduced with secure boot support, everything required should still be here, but now in Kconfig, or requires migration of an option to Kconfig. Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:34 +00:00
if PPC
config BOOTSCRIPT_COPY_RAM
bool "Secure boot copies boot script to RAM"
help
On systems that support chain of trust booting, a number of addresses
are required to set variables that are used in the copying and then
verification of different parts of the system. If enabled, the subsequent
options are for what location to use in each step.
config BS_ADDR_DEVICE
hex "Address in RAM for bs_device"
depends on BOOTSCRIPT_COPY_RAM
config BS_SIZE
hex "The size of bs_size which is the amount read from bs_device"
depends on BOOTSCRIPT_COPY_RAM
config BS_ADDR_RAM
hex "Address in RAM for bs_ram"
depends on BOOTSCRIPT_COPY_RAM
config BS_HDR_ADDR_DEVICE
hex "Address in RAM for bs_hdr_device"
depends on BOOTSCRIPT_COPY_RAM
config BS_HDR_SIZE
hex "The size of bs_hdr_size which is the amount read from bs_hdr_device"
depends on BOOTSCRIPT_COPY_RAM
config BS_HDR_ADDR_RAM
hex "Address in RAM for bs_hdr_ram"
depends on BOOTSCRIPT_COPY_RAM
config BOOTSCRIPT_HDR_ADDR
hex "CONFIG_BOOTSCRIPT_HDR_ADDR"
default BS_ADDR_RAM if BOOTSCRIPT_COPY_RAM
endif
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
config SYS_FSL_SRK_LE
def_bool y
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
depends on ARM
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
config KEY_REVOCATION
def_bool y
arch/Kconfig.nxp: Re-organize slightly Make all of the CHAIN_OF_TRUST options be under a single menu and add a comment for the rest, so the resulting config file reads more clearly. Remove duplicate CHAIN_OF_TRUST options from board/congatec/common/Kconfig. Remove duplicate NXP_ESBC config questions and move to arch/Kconfig.nxp. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-17 20:24:31 +00:00
endmenu
comment "Other functionality shared between NXP SoCs"
Convert CONFIG_SYS_FSL_SFP_BE et al to Kconfig This converts the following to Kconfig: CONFIG_KEY_REVOCATION CONFIG_SYS_FSL_SFP_BE CONFIG_SYS_FSL_SFP_LE CONFIG_SYS_FSL_SFP_VER_3_0 CONFIG_SYS_FSL_SFP_VER_3_2 CONFIG_SYS_FSL_SFP_VER_3_4 CONFIG_SYS_FSL_SRK_LE This partly means making sure to enable SYS_FSL_ERRATUM_A007186 only for when CHAIN_OF_TRUST is enabled. Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:40 +00:00
Convert CONFIG_DEEP_SLEEP to Kconfig This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-24 21:17:58 +00:00
config DEEP_SLEEP
bool "Enable SoC deep sleep feature"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
depends on ARCH_T1024 || ARCH_T1040 || ARCH_T1042 || ARCH_LS1021A
default y
Convert CONFIG_DEEP_SLEEP to Kconfig This converts the following to Kconfig: CONFIG_DEEP_SLEEP Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-24 21:17:58 +00:00
help
Indicates this SoC supports deep sleep feature. If deep sleep is
supported, core will start to execute uboot when wakes up.
board: freescale: Refactor NXP common mux code Refactors similar mux code from multiple NXP boards into a common location, and allows it to be disabled in config. New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-22 23:35:20 +00:00
config FSL_USE_PCA9547_MUX
bool "Enable PCA9547 I2C Mux on Freescale boards"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
board: freescale: Refactor NXP common mux code Refactors similar mux code from multiple NXP boards into a common location, and allows it to be disabled in config. New config: CONFIG_FSL_USE_PCA9547_MUX to enable PCA9547 mux functionality. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-06-22 23:35:20 +00:00
help
This option enables the PCA9547 I2C mux on Freescale boards.
arm: fsl: common: Improve NXP VID driver PMBus support This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 10:11:29 +00:00
config VID
bool "Enable Freescale VID"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (I2C || DM_I2C)
arm: fsl: common: Improve NXP VID driver PMBus support This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 10:11:29 +00:00
help
This option enables setting core voltage based on individual
values saved in SoC fuses.
Finish CONFIG_VID et al conversion to Kconfig This converts the following to Kconfig: CONFIG_VID CONFIG_VOL_MONITOR_INA220 CONFIG_VOL_MONITOR_IR36021_READ CONFIG_VOL_MONITOR_IR36021_SET CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET To finish this migration, we first need to introduce CONFIG_SPL_VID as some platforms only use this code in full U-Boot while others use it in SPL as well. To make the Kconfig logic clearer, guard all of the sub-options with a if VID || SPL_VID check. Finally, add Kconfig options for the remaining related options that did not previously have one. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-13 03:12:31 +00:00
config SPL_VID
bool "Enable Freescale VID in SPL"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
depends on (PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3) && (SPL_I2C || DM_SPL_I2C)
Finish CONFIG_VID et al conversion to Kconfig This converts the following to Kconfig: CONFIG_VID CONFIG_VOL_MONITOR_INA220 CONFIG_VOL_MONITOR_IR36021_READ CONFIG_VOL_MONITOR_IR36021_SET CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET To finish this migration, we first need to introduce CONFIG_SPL_VID as some platforms only use this code in full U-Boot while others use it in SPL as well. To make the Kconfig logic clearer, guard all of the sub-options with a if VID || SPL_VID check. Finally, add Kconfig options for the remaining related options that did not previously have one. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-13 03:12:31 +00:00
help
This option enables setting core voltage based on individual
values saved in SoC fuses, in SPL.
if VID || SPL_VID
config VID_FLS_ENV
string "Environment variable for overriding VDD"
help
This option allows for specifying the environment variable
to check to override VDD information.
config VOL_MONITOR_INA220
bool "Enable the INA220 voltage monitor read"
help
This option enables INA220 voltage monitor read
functionality. It is used by the common VID driver.
config VOL_MONITOR_IR36021_READ
bool "Enable the IR36021 voltage monitor read"
help
This option enables IR36021 voltage monitor read
functionality. It is used by the common VID driver.
config VOL_MONITOR_IR36021_SET
bool "Enable the IR36021 voltage monitor set"
help
This option enables IR36021 voltage monitor set
functionality. It is used by the common VID driver.
Kconfig: Add LTC3882 voltage regulator config Adds below LTC3882 voltage regulator config: CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:43:04 +00:00
config VOL_MONITOR_LTC3882_READ
bool "Enable the LTC3882 voltage monitor read"
help
This option enables LTC3882 voltage monitor read
arm: fsl: common: Improve NXP VID driver PMBus support This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 10:11:29 +00:00
functionality. It is used by the common VID driver.
Kconfig: Add LTC3882 voltage regulator config Adds below LTC3882 voltage regulator config: CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-17 10:43:04 +00:00
config VOL_MONITOR_LTC3882_SET
bool "Enable the LTC3882 voltage monitor set"
help
This option enables LTC3882 voltage monitor set
arm: fsl: common: Improve NXP VID driver PMBus support This patch adds support for more PMBus compatible devices to the NXP drivers for its QorIQ family devices. At runtime, the voltage regulator is queried over I2C, and the required voltage multiplier determined. This change supports the DIRECT and LINEAR PMBus voltage reporting modes. Previously, the driver only supported a few specific devices such as the IR36021 and LTC3882, so this change allows the QorIQ series to be used with a much larger variety of core voltage regulator devices. checkpatch warning "Use if (IS_DEFINED (...))" was ignored to maintain consistency with the existing code. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Tested-by: Wasim Khan <wasim.khan@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 10:11:29 +00:00
functionality. It is used by the common VID driver.
config VOL_MONITOR_ISL68233_READ
bool "Enable the ISL68233 voltage monitor read"
help
This option enables ISL68233 voltage monitor read
functionality. It is used by the common VID driver.
config VOL_MONITOR_ISL68233_SET
bool "Enable the ISL68233 voltage monitor set"
help
This option enables ISL68233 voltage monitor set
functionality. It is used by the common VID driver.
Finish CONFIG_VID et al conversion to Kconfig This converts the following to Kconfig: CONFIG_VID CONFIG_VOL_MONITOR_INA220 CONFIG_VOL_MONITOR_IR36021_READ CONFIG_VOL_MONITOR_IR36021_SET CONFIG_VOL_MONITOR_LTC3882_READ CONFIG_VOL_MONITOR_LTC3882_SET To finish this migration, we first need to introduce CONFIG_SPL_VID as some platforms only use this code in full U-Boot while others use it in SPL as well. To make the Kconfig logic clearer, guard all of the sub-options with a if VID || SPL_VID check. Finally, add Kconfig options for the remaining related options that did not previously have one. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-13 03:12:31 +00:00
endif
Convert CONFIG_FSL_QIXIS et al to Kconfig This converts the following to Kconfig: CONFIG_FSL_QIXIS CONFIG_QIXIS_I2C_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-30 22:07:32 +00:00
config FSL_QIXIS
bool "Enable QIXIS support"
nxp: Make board/freescale/common/Kconfig safe to include once in arch/Kconfig The way that we use this file currently means that we have to guard it in every platform Kconfig. But it is also required in all NXP platforms, including non-reference platforms. Make all options in it have appropriate dependencies so that we can include it a single time under arch/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-16 18:04:35 +00:00
depends on PPC || ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3
Convert CONFIG_FSL_QIXIS et al to Kconfig This converts the following to Kconfig: CONFIG_FSL_QIXIS CONFIG_QIXIS_I2C_ACCESS Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-30 22:07:32 +00:00
config QIXIS_I2C_ACCESS
bool "Access to QIXIS is over i2c"
depends on FSL_QIXIS
default y
Convert CONFIG_HAS_FSL_DR_USB to Kconfig This converts the following to Kconfig: CONFIG_HAS_FSL_DR_USB Signed-off-by: Tom Rini <trini@konsulko.com>
2022-06-08 12:24:28 +00:00
config HAS_FSL_DR_USB
def_bool y
depends on USB_EHCI_HCD && PPC
Reference in New Issue Copy Permalink