u-boot/cmd/Makefile

228 lines
6.8 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2004-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifndef CONFIG_SPL_BUILD
# core command
obj-y += boot.o
obj-$(CONFIG_CMD_BOOTM) += bootm.o
obj-y += help.o
obj-y += version.o
# command
obj-$(CONFIG_CMD_AES) += aes.o
obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
obj-$(CONFIG_CMD_ADC) += adc.o
obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_common.o
obj-$(CONFIG_CMD_SOURCE) += source.o
cmd: Add 'bcb' command to read/modify/write BCB fields 'Bootloader Control Block' (BCB) is a well established term/acronym in the Android namespace which refers to a location in a dedicated raw (i.e. FS-unaware) flash (e.g. eMMC) partition, usually called "misc", which is used as media for exchanging messages between Android userspace (particularly recovery [1]) and an Android-capable bootloader. On higher level, this allows implementing a subset of Android Bootloader Requirements [2], amongst which is the Android-specific bootloader flow [3]. Regardless how the latter is implemented in U-Boot ([3] being the most memorable example), reading/writing/dumping the BCB fields in the development process from inside the U-Boot is a convenient feature. Hence, make it available to the users. Some usage examples of the new command recorded on R-Car H3ULCB-KF ('>>>' is an overlay on top of the original console output): => bcb bcb - Load/set/clear/test/dump/store Android BCB fields Usage: bcb load <dev> <part> - load BCB from mmc <dev>:<part> bcb set <field> <val> - set BCB <field> to <val> bcb clear [<field>] - clear BCB <field> or all fields bcb test <field> <op> <val> - test BCB <field> against <val> bcb dump <field> - dump BCB <field> bcb store - store BCB back to mmc Legend: <dev> - MMC device index containing the BCB partition <part> - MMC partition index or name containing the BCB <field> - one of {command,status,recovery,stage,reserved} <op> - the binary operator used in 'bcb test': '=' returns true if <val> matches the string stored in <field> '~' returns true if <val> matches a subset of <field>'s string <val> - string/text provided as input to bcb {set,test} NOTE: any ':' character in <val> will be replaced by line feed during 'bcb set' and used as separator by upper layers => bcb dump command Error: Please, load BCB first! >>> Users must specify mmc device and partition before any other call => bcb load 1 misc => bcb load 1 1 >>> The two calls are equivalent (assuming "misc" has index 1) => bcb dump command 00000000: 62 6f 6f 74 6f 6e 63 65 2d 73 68 65 6c 6c 00 72 bootonce-shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The output is in binary/string format for convenience >>> The output size matches the size of inspected BCB field >>> (32 bytes in case of 'command') => bcb test command = bootonce-shell && echo true true => bcb test command = bootonce-shell- && echo true => bcb test command = bootonce-shel && echo true >>> The '=' operator returns 'true' on perfect match => bcb test command ~ bootonce-shel && echo true true => bcb test command ~ bootonce-shell && echo true true >>> The '~' operator returns 'true' on substring match => bcb set command recovery => bcb dump command 00000000: 72 65 63 6f 76 65 72 79 00 73 68 65 6c 6c 00 72 recovery.shell.r 00000010: 79 00 72 00 00 00 00 00 00 00 00 00 00 00 00 00 y.r............. >>> The new value is NULL-terminated and stored in the BCB field => bcb set recovery "msg1:msg2:msg3" => bcb dump recovery 00000040: 6d 73 67 31 0a 6d 73 67 32 0a 6d 73 67 33 00 00 msg1.msg2.msg3.. 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ >>> --- snip --- >>> Every ':' is replaced by line-feed '\n' (0xA). The latter is used >>> as separator between individual commands by Android userspace => bcb store >>> Flush/store the BCB structure to MMC [1] https://android.googlesource.com/platform/bootable/recovery [2] https://source.android.com/devices/bootloader [3] https://patchwork.ozlabs.org/patch/746835/ ("[U-Boot,5/6] Initial support for the Android Bootloader flow") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
2019-05-23 15:32:22 +00:00
obj-$(CONFIG_CMD_BCB) += bcb.o
obj-$(CONFIG_CMD_BDI) += bdinfo.o
obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
obj-$(CONFIG_CMD_BIND) += bind.o
obj-$(CONFIG_CMD_BINOP) += binop.o
obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o
obj-$(CONFIG_CMD_BMP) += bmp.o
obj-$(CONFIG_CMD_BOOTCOUNT) += bootcount.o
obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o
obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
obj-$(CONFIG_CMD_BOOTSTAGE) += bootstage.o
obj-$(CONFIG_CMD_BOOTZ) += bootz.o
obj-$(CONFIG_CMD_BOOTI) += booti.o
obj-$(CONFIG_CMD_BTRFS) += btrfs.o
obj-$(CONFIG_CMD_CACHE) += cache.o
obj-$(CONFIG_CMD_CBFS) += cbfs.o
obj-$(CONFIG_CMD_CLK) += clk.o
obj-$(CONFIG_CMD_CLS) += cls.o
obj-$(CONFIG_CMD_CONFIG) += config.o
obj-$(CONFIG_CMD_CONITRACE) += conitrace.o
obj-$(CONFIG_CMD_CONSOLE) += console.o
obj-$(CONFIG_CMD_CPU) += cpu.o
obj-$(CONFIG_DATAFLASH_MMC_SELECT) += dataflash_mmc_mux.o
obj-$(CONFIG_CMD_DATE) += date.o
obj-$(CONFIG_CMD_DEMO) += demo.o
obj-$(CONFIG_CMD_DM) += dm.o
obj-$(CONFIG_CMD_SOUND) += sound.o
ifdef CONFIG_POST
obj-$(CONFIG_CMD_DIAG) += diag.o
endif
obj-$(CONFIG_CMD_DTIMG) += dtimg.o
obj-$(CONFIG_CMD_ECHO) += echo.o
obj-$(CONFIG_ENV_IS_IN_EEPROM) += eeprom.o
obj-$(CONFIG_CMD_EEPROM) += eeprom.o
obj-$(CONFIG_EFI_STUB) += efi.o
obj-$(CONFIG_CMD_EFIDEBUG) += efidebug.o
obj-$(CONFIG_CMD_ELF) += elf.o
obj-$(CONFIG_HUSH_PARSER) += exit.o
obj-$(CONFIG_CMD_EXT4) += ext4.o
obj-$(CONFIG_CMD_EXT2) += ext2.o
obj-$(CONFIG_CMD_FAT) += fat.o
obj-$(CONFIG_CMD_FDC) += fdc.o
obj-$(CONFIG_CMD_FDT) += fdt.o
obj-$(CONFIG_CMD_FITUPD) += fitupd.o
obj-$(CONFIG_CMD_FLASH) += flash.o
obj-$(CONFIG_CMD_FPGA) += fpga.o
obj-$(CONFIG_CMD_FPGAD) += fpgad.o
obj-$(CONFIG_CMD_FS_GENERIC) += fs.o
obj-$(CONFIG_CMD_FUSE) += fuse.o
obj-$(CONFIG_CMD_GETTIME) += gettime.o
obj-$(CONFIG_CMD_GPIO) += gpio.o
obj-$(CONFIG_CMD_HVC) += smccc.o
obj-$(CONFIG_CMD_I2C) += i2c.o
obj-$(CONFIG_CMD_IOTRACE) += iotrace.o
obj-$(CONFIG_CMD_HASH) += hash.o
obj-$(CONFIG_CMD_IDE) += ide.o disk.o
obj-$(CONFIG_CMD_INI) += ini.o
obj-$(CONFIG_CMD_IRQ) += irq.o
obj-$(CONFIG_CMD_ITEST) += itest.o
obj-$(CONFIG_CMD_JFFS2) += jffs2.o
obj-$(CONFIG_CMD_CRAMFS) += cramfs.o
obj-$(CONFIG_LED_STATUS_CMD) += legacy_led.o
obj-$(CONFIG_CMD_LED) += led.o
obj-$(CONFIG_CMD_LICENSE) += license.o
obj-y += load.o
obj-$(CONFIG_CMD_LOG) += log.o
obj-$(CONFIG_ID_EEPROM) += mac.o
obj-$(CONFIG_CMD_MD5SUM) += md5sum.o
obj-$(CONFIG_CMD_MEMORY) += mem.o
obj-$(CONFIG_CMD_IO) += io.o
obj-$(CONFIG_CMD_MFSL) += mfsl.o
obj-$(CONFIG_CMD_MII) += mii.o
ifdef CONFIG_PHYLIB
obj-$(CONFIG_CMD_MII) += mdio.o
endif
obj-$(CONFIG_CMD_MISC) += misc.o
obj-$(CONFIG_CMD_MMC) += mmc.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_CMD_MTD) += mtd.o
obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
ifneq ($(CONFIG_CMD_NAND)$(CONFIG_CMD_SF),)
obj-y += legacy-mtd-utils.o
endif
obj-$(CONFIG_CMD_NAND) += nand.o
obj-$(CONFIG_CMD_NET) += net.o
obj-$(CONFIG_CMD_NVEDIT_EFI) += nvedit_efi.o
obj-$(CONFIG_CMD_ONENAND) += onenand.o
obj-$(CONFIG_CMD_OSD) += osd.o
obj-$(CONFIG_CMD_PART) += part.o
obj-$(CONFIG_CMD_PCAP) += pcap.o
ifdef CONFIG_PCI
obj-$(CONFIG_CMD_PCI) += pci.o
endif
obj-$(CONFIG_CMD_PINMUX) += pinmux.o
obj-$(CONFIG_CMD_PXE) += pxe.o pxe_utils.o
obj-$(CONFIG_CMD_WOL) += wol.o
obj-$(CONFIG_CMD_QFW) += qfw.o
obj-$(CONFIG_CMD_READ) += read.o
obj-$(CONFIG_CMD_REGINFO) += reginfo.o
obj-$(CONFIG_CMD_REISER) += reiser.o
obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
obj-$(CONFIG_CMD_ROCKUSB) += rockusb.o
obj-$(CONFIG_SANDBOX) += host.o
obj-$(CONFIG_CMD_SATA) += sata.o
obj-$(CONFIG_CMD_NVME) += nvme.o
obj-$(CONFIG_SANDBOX) += sb.o
obj-$(CONFIG_CMD_SF) += sf.o
obj-$(CONFIG_CMD_SCSI) += scsi.o disk.o
obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
obj-$(CONFIG_CMD_SPI) += spi.o
obj-$(CONFIG_CMD_STRINGS) += strings.o
obj-$(CONFIG_CMD_SMC) += smccc.o
obj-$(CONFIG_CMD_TERMINAL) += terminal.o
obj-$(CONFIG_CMD_TIME) += time.o
obj-$(CONFIG_CMD_TRACE) += trace.o
obj-$(CONFIG_HUSH_PARSER) += test.o
obj-$(CONFIG_CMD_TPM) += tpm-common.o
obj-$(CONFIG_CMD_TPM_V1) += tpm-v1.o
obj-$(CONFIG_CMD_TPM_TEST) += tpm_test.o
obj-$(CONFIG_CMD_TPM_V2) += tpm-v2.o
obj-$(CONFIG_CMD_CROS_EC) += cros_ec.o
obj-$(CONFIG_CMD_TSI148) += tsi148.o
obj-$(CONFIG_CMD_UBI) += ubi.o
obj-$(CONFIG_CMD_UBIFS) += ubifs.o
obj-$(CONFIG_CMD_UNIVERSE) += universe.o
obj-$(CONFIG_CMD_UNZIP) += unzip.o
obj-$(CONFIG_CMD_VIRTIO) += virtio.o
obj-$(CONFIG_CMD_WDT) += wdt.o
obj-$(CONFIG_CMD_LZMADEC) += lzmadec.o
obj-$(CONFIG_CMD_UFS) += ufs.o
obj-$(CONFIG_CMD_USB) += usb.o disk.o
obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o
obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o
obj-$(CONFIG_CMD_USB_MASS_STORAGE) += usb_mass_storage.o
obj-$(CONFIG_CMD_USB_SDP) += usb_gadget_sdp.o
obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o
obj-$(CONFIG_CMD_XIMG) += ximg.o
obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o
obj-$(CONFIG_CMD_SPL) += spl.o
obj-$(CONFIG_CMD_W1) += w1.o
obj-$(CONFIG_CMD_ZIP) += zip.o
obj-$(CONFIG_CMD_ZFS) += zfs.o
obj-$(CONFIG_CMD_DFU) += dfu.o
obj-$(CONFIG_CMD_GPT) += gpt.o
obj-$(CONFIG_CMD_ETHSW) += ethsw.o
obj-$(CONFIG_CMD_AXI) += axi.o
# Power
obj-$(CONFIG_CMD_PMIC) += pmic.o
obj-$(CONFIG_CMD_REGULATOR) += regulator.o
obj-$(CONFIG_CMD_BLOB) += blob.o
# Android Verified Boot 2.0
obj-$(CONFIG_CMD_AVB) += avb.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_RISCV) += riscv/
obj-$(CONFIG_X86) += x86/
obj-$(CONFIG_ARCH_MVEBU) += mvebu/
endif # !CONFIG_SPL_BUILD
# core command
obj-y += nvedit.o
obj-$(CONFIG_TI_COMMON_CMD_OPTIONS) += ti/
filechk_data_gz = (echo "static const char data_gz[] ="; cat $< | scripts/bin2c; echo ";")
filechk_data_size = \
(echo "static const size_t data_size = "; \
cat $< | wc -c; echo ";")
# "config" command
$(obj)/config.o: $(obj)/config_data_gz.h $(obj)/config_data_size.h
targets += config_data.gz
$(obj)/config_data.gz: $(KCONFIG_CONFIG) FORCE
$(call if_changed,gzip)
targets += config_data_gz.h
$(obj)/config_data_gz.h: $(obj)/config_data.gz FORCE
$(call filechk,data_gz)
targets += config_data_size.h
$(obj)/config_data_size.h: $(KCONFIG_CONFIG) FORCE
$(call filechk,data_size)
# "license" command
$(obj)/license.o: $(obj)/license_data_gz.h $(obj)/license_data_size.h
targets += license_data.gz
$(obj)/license_data.gz: $(srctree)/Licenses/gpl-2.0.txt FORCE
$(call if_changed,gzip)
targets += license_data_gz.h
$(obj)/license_data_gz.h: $(obj)/license_data.gz FORCE
$(call filechk,data_gz)
targets += license_data_size.h
$(obj)/license_data_size.h: $(srctree)/Licenses/gpl-2.0.txt FORCE
$(call filechk,data_size)
CFLAGS_ethsw.o := -Wno-enum-conversion