leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
22aa2814e8
u-boot/configs/evb-rk3288_defconfig

85 lines
2.1 KiB
Plaintext
Raw Normal View History

rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
rockchip: rk3288: enable TPL for evb-rk3288 Enable TPL for evb-rk3288 so that we can have a free size limited SPL. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-07-09 13:58:46 +00:00
CONFIG_SYS_TEXT_BASE=0x01000000
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_EVB_RK3288=y
env: Finish migration of common ENV options - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
2019-11-19 01:02:10 +00:00
CONFIG_ENV_OFFSET=0x3F8000
rockchip: rk3288-evb: update SPL_STACK/MALLOC_LEN config with rk3399 Update the SPL_STACK_R_MALLOC_SIMPLE_LEN which also including space for STACK and the size may not enough when loding FIT image in SPL. If the size is not enough, you can see log like this when loding FIT: U-Boot TPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53) Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53 +0800) Trying to boot from MMC2 And if enable the DEBUG for everyting in SPL, the log will hang at dwmmc sending CMD16 for 'uboot' loadables binary because this step need a large stack cost(about 0x2d00). External data: dst=8400000, offset=72638, size=b3580 Image OS is Trusted Execution Environment board_fit_config_name_match: rk3288-evb Selecting config 'rk3288-evb'loadables: 'uboot' blk_find_device: if_type=6, devnum=1: dwmmc@ff0c0000.blk, 6, 0 blk_find_device: if_type=6, devnum=1: dwmmc@ff0f0000.blk, 6, 1 Sending CMD16 Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 10:11:53 +00:00
CONFIG_SPL_STACK_R_ADDR=0x04000000
rockchip: rk3288-evb: update CONFIG_NR_DRAM_BANKS to 2 The OPTEE will use the ram start at 0x8400000 which make the DRAM be two banks. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 10:11:54 +00:00
CONFIG_NR_DRAM_BANKS=2
spl: Convert CONFIG_SPL_SIZE_LIMIT to hex This is currently a decimal value which is not as convenient or meaningful. Also U-Boot tends to use hex everywhere. Convert this option to hex and add a comment for the size_check macro. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Acked-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct the typo in the commit title] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-09-25 14:56:28 +00:00
CONFIG_SPL_SIZE_LIMIT=0x4b000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-06-04 15:57:37 +00:00
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
configs: Resync defconfigs Signed-off-by: Tom Rini <trini@konsulko.com>
2017-06-19 13:47:40 +00:00
CONFIG_DEBUG_UART=y
Kconfig: Migrate all of cmd/fastboot/Kconfig to defconfigs - Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's not strictly part of fastboot. - Add some defaults for the fastboot buffer location and size - Migrate all options listed in cmd/fastboot/Kconfig - Cleanup the README Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-25 21:50:27 +00:00
# CONFIG_ANDROID_BOOT_IMAGE is not set
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
2019-07-21 02:51:14 +00:00
CONFIG_USE_PREBOOT=y
Convert SILENT_CONSOLE options to Kconfig Move these option to Kconfig and tidy up existing uses. The Power PC boards don't have a suitable common element: the common header files don't appear to line up with the Kconfig files as far as I can tell. This results in a lot of defconfig changes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com> [trini: Re-migrate, update common/console.c logic] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-18 02:12:35 +00:00
CONFIG_SILENT_CONSOLE=y
rockchip: utilize CONFIG_DEFAULT_FDT_FILE Currently the fdtfile environment variable is set to CONFIG_DEFAULT_DEVICE_TREE which is іnternally used as U-Boot devicetree source. The OS can use a different filename and Kconfig gives us the ability to select a default devicetree via CONFIG_DEFAULT_FDT_FILE. This also gives user configuring U-Boot via menuconfig the behaviour someone would expect. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Tested-By: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-05-25 21:45:05 +00:00
CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig This converts the following to Kconfig: CONFIG_SYS_CONSOLE_IS_IN_ENV CONFIG_CONSOLE_MUX Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Re-order, re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2016-10-18 02:12:37 +00:00
# CONFIG_DISPLAY_CPUINFO is not set
treewide: Migrate CONFIG_DISPLAY_BOARDINFO_LATE to Kconfig Migrate the CONFIG_DISPLAY_BOARDINFO_LATE option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 12:38:17 +00:00
CONFIG_DISPLAY_BOARDINFO_LATE=y
rockchip: config: evb-rk3288: enable SPL_STACK_R We need a new STACK in SDRAM instead of SRAM so that the EMMC controller can work properly. The EMMC/SD controller's master is not able to access SRAM area, it can only access DRAM area. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-09-18 09:56:42 +00:00
CONFIG_SPL_STACK_R=y
rockchip: rk3288-evb: update SPL_STACK/MALLOC_LEN config with rk3399 Update the SPL_STACK_R_MALLOC_SIMPLE_LEN which also including space for STACK and the size may not enough when loding FIT image in SPL. If the size is not enough, you can see log like this when loding FIT: U-Boot TPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53) Trying to boot from BOOTROM Returning to boot ROM... U-Boot SPL 2020.01-rc3-00082-g4b19b89ca4-dirty (Dec 05 2019 - 11:52:53 +0800) Trying to boot from MMC2 And if enable the DEBUG for everyting in SPL, the log will hang at dwmmc sending CMD16 for 'uboot' loadables binary because this step need a large stack cost(about 0x2d00). External data: dst=8400000, offset=72638, size=b3580 Image OS is Trusted Execution Environment board_fit_config_name_match: rk3288-evb Selecting config 'rk3288-evb'loadables: 'uboot' blk_find_device: if_type=6, devnum=1: dwmmc@ff0c0000.blk, 6, 0 blk_find_device: if_type=6, devnum=1: dwmmc@ff0f0000.blk, 6, 1 Sending CMD16 Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-12-05 10:11:53 +00:00
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_GPIO=y
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 10:00:42 +00:00
CONFIG_CMD_GPT=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-14 23:58:53 +00:00
CONFIG_CMD_I2C=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
rockchip: rk3288: enable rockusb support on rk3288 based device this patch enable rockusb support on rk3288 based device. Signed-off-by: Eddie Cai <eddie.cai.linux@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2017-12-15 00:17:13 +00:00
CONFIG_CMD_USB=y
configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into Kconfig This affects RK3036, RK322X and RK3288 - the defconfig changes done by moveconfig.py for the veyrons were left out on purpose because they dont have an OTG port, and will get their config updated in the next commit. Signed-off-by: Urja Rannikko <urjaman@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-13 13:51:04 +00:00
CONFIG_CMD_USB_MASS_STORAGE=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIME=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
disk: convert CONFIG_DOS_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27 10:00:37 +00:00
# CONFIG_SPL_DOS_PARTITION is not set
disk: convert CONFIG_EFI_PARTITION to Kconfig Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com>
2017-01-27 10:00:41 +00:00
# CONFIG_SPL_EFI_PARTITION is not set
cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT We convert CONFIG_PARTITION_UUIDS to Kconfig first. But in order to cleanly update all of the config files we must also update CMD_PART and CMD_GPT to also be in Kconfig in order to avoid complex logic elsewhere to update all of the config files. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay73@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2017-01-27 10:00:42 +00:00
CONFIG_SPL_PARTITION_UUIDS=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_SPL_OF_CONTROL=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-09-03 19:26:12 +00:00
CONFIG_DEFAULT_DEVICE_TREE="rk3288-evb"
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-28 11:16:32 +00:00
CONFIG_ENV_IS_IN_MMC=y
env: Add CONFIG_SYS_RELOC_GD_ENV_ADDR symbol Today in initr_reloc_global_data() we use some non-obvious tests to determine if we need to relocate the env_addr within gd or not. In order to facilitate migration of other symbols to Kconfig we need to introduce a new symbol for this particular use case. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2019-11-13 03:46:36 +00:00
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
rockchip: configs: Enable CONFIG_NET_RANDOM_ETHADDR for rk3288-evb If the Ethernet address is not set, the network can't work, enable the random address config for default use. Signed-off-by: David Wu <david.wu@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2018-01-13 05:53:55 +00:00
CONFIG_NET_RANDOM_ETHADDR=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
usb: fastboot: Convert USB f_fastboot to shared fastboot Convert USB fastboot code to use shared fastboot protocol. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-05-29 15:30:55 +00:00
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_LED=y
CONFIG_LED_GPIO=y
mmc: move CONFIG_DWMMC to Kconfig, renaming to CONFIG_MMC_DW This commit was created as follows: [1] Rename the option with the following command: find . -name .git -prune -o ! -path ./scripts/config_whitelist.txt \ -type f -print | xargs sed -i -e 's/CONFIG_DWMMC/CONFIG_MMC_DW/g' [2] create the entry for MMC_DW in drivers/mmc/Kconfig (the prompt and help were copied from Linux) [3] run "tools/moveconfig.py -y MMC_DW" [4] add "depends on MMC_DW" to the MMC_DW_ROCKCHIP entry [5] Clean-up doc/README.socfpga by hand Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-10 04:32:04 +00:00
CONFIG_MMC_DW=y
mmc: rename CONFIG_ROCKCHIP_DWMMC to CONFIG_MMC_DW_ROCKCHIP I am trying to make all DesignWare-based driver options prefixed with CONFIG_MMC_DW_. This commit was generated as follows: find . -name .git -prune -o -type f -print | \ xargs sed -i -e 's/ROCKCHIP_DWMMC/MMC_DW_ROCKCHIP/g' Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
2017-01-10 04:32:03 +00:00
CONFIG_MMC_DW_ROCKCHIP=y
mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD Like in Linux, just use CONFIG_MTD to compile the MTD stack. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
2019-10-03 17:50:05 +00:00
CONFIG_MTD=y
Convert CONFIG_SF_DEFAULT_* to Kconfig This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2019-02-27 14:20:36 +00:00
CONFIG_SF_DEFAULT_SPEED=20000000
rockchip: configs: Enable networking support on rk3288 boards At current, only firefly and rock2 have network enabled. Let's enable other boards. Signed-off-by: Jacob Chen <jacob2.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
2017-02-23 06:20:17 +00:00
CONFIG_DM_ETH=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_GMAC_ROCKCHIP=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_ACT8846=y
CONFIG_REGULATOR_ACT8846=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_DEBUG_UART_SHIFT=2
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com>
2016-09-08 20:11:59 +00:00
CONFIG_SYSRESET=y
configs: Migrate all of the existing USB symbols, except fastboot This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-25 21:50:26 +00:00
CONFIG_USB=y
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2018-02-11 01:27:45 +00:00
CONFIG_USB_DWC2=y
Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig This converts the following to Kconfig: CONFIG_ROCKCHIP_USB2_PHY Signed-off-by: Adam Ford <aford173@gmail.com>
2018-01-02 16:39:52 +00:00
CONFIG_ROCKCHIP_USB2_PHY=y
configs: Migrate all of the existing USB symbols, except fastboot This syncs all of the currently Kconfig'd symbols out of the headers and into the defconfig files. This has two exceptions, first am335x_evm needs to be converted to DM in SPL and then it can stop undef'ing CONFIG_DM_USB. Leaving this as-is results in a build failure, and without work, run time failure. The other case is am43xx_evm.h and in turn am43xx_evm_usbhost_boot. The problem here is that we need DWC3 USB host mode in SPL, but still desire to have gadget mode in U-Boot proper. Signed-off-by: Tom Rini <trini@konsulko.com>
2017-08-25 21:50:26 +00:00
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DWC2_OTG=y
rockchip: video: defconfig: Add mipi dsi support for evb-rk3288 Add support for rk3288 mipi dsi. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-21 03:22:03 +00:00
CONFIG_DM_VIDEO=y
video: make BPP and ANSI configs optional Many boards do not use all selected framebuffer depth configurations, for such boards there is some unused code in video and console uclass routines. Make depth specific code optional to avoid dead code and slightly reduce binary size. Also make ANSI code optional for the same reason. When i.e. using only VIDEO_BPP16 the code size shrinks (below values when using gcc-7.3.0): $ ./tools/buildman/buildman -b video-wip -sS wandboard ... 01: Merge git://git.denx.de/u-boot-sh 02: video: add guards around 16bpp/32bbp code 03: video: make BPP and ANSI configs optional arm: (for 1/1 boards) all -776.0 bss -8.0 text -768.0 Signed-off-by: Anatolij Gustschin <agust@denx.de> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Patrice Chotard <patrice.chotard@st.com> Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
2019-12-04 14:48:54 +00:00
CONFIG_VIDEO_BPP16=y
CONFIG_VIDEO_BPP32=y
rockchip: video: defconfig: Add mipi dsi support for evb-rk3288 Add support for rk3288 mipi dsi. Signed-off-by: Eric Gao <eric.gao@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-06-21 03:22:03 +00:00
CONFIG_DISPLAY=y
CONFIG_VIDEO_ROCKCHIP=y
CONFIG_VIDEO_ROCKCHIP_MAX_YRES=1200
CONFIG_DISPLAY_ROCKCHIP_MIPI=y
rockchip: add basic support for evb-rk3288 board evb-3288 board RK3288-based development board with 2 USB ports, HDMI, VGA, micro-SD card, audio, WiFi and Gigabit Ethernet. It also includes on-board 8G eMMC and 2GB of SDRAM. Expansion connector provide access to display pins, I2C, SPI, UART and GPIOs. This add some basic files required to allow the board to output serial messaged and can run command(mmc info etc). evb-rk3288 also supports booting from eMMC or SD card, the default is eMMC. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2016-07-05 10:06:30 +00:00
CONFIG_CMD_DHRYSTONE=y
CONFIG_ERRNO_STR=y
Reference in New Issue Copy Permalink