u-boot/configs/A20-Olimex-SOM-EVB_defconfig

CONFIG_ARM=y
CONFIG_ARCH_SUNXI=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"
CONFIG_SPL=y
CONFIG_MACH_SUN7I=y
CONFIG_DRAM_CLK=384
CONFIG_MMC0_CD_PIN="PH1"
CONFIG_MMC3_CD_PIN="PH0"
CONFIG_MMC3_PINS="PH"
CONFIG_MMC_SUNXI_SLOT_EXTRA=3
CONFIG_USB0_VBUS_PIN="PB9"
CONFIG_USB0_VBUS_DET="PH5"
CONFIG_SATAPWR="PC3"
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C_SUPPORT=y
CONFIG_SCSI_AHCI=y
CONFIG_PHY_REALTEK=y
CONFIG_RTL8211X_PHY_FORCE_MASTER=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_RGMII=y
CONFIG_MII=y
CONFIG_SUN7I_GMAC=y
CONFIG_AXP_ALDO3_VOLT=2800
CONFIG_AXP_ALDO4_VOLT=2800
CONFIG_SCSI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_ARM=y`
			`CONFIG_ARCH_SUNXI=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2021-06-28 14:17:29 +00:00			`CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olimex-som-evb"`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2018-04-08 00:27:54 +00:00			`CONFIG_SPL=y`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_MACH_SUN7I=y`
sunxi: Update DRAM clock for Olimex A20 boards Originally dram clock was set to 480MHz, but this behaves unstable. To improve stability the clock is reduced to 384MHz Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-10-29 12:34:07 +00:00			`CONFIG_DRAM_CLK=384`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_MMC0_CD_PIN="PH1"`
sunxi: A20-Olimex-SOM-EVB defconfig: enable mmc3 The Olimex A20-SOM-EVB is an evaluation board for the Olimex A20-SOM system-on-module. The baseboard provides a full-size SD socket (connected to mmc3) in addition to the micro-SD socket on the SOM itself (which is connected to mmc0). Enable the mmc3 controller in the board defconfig. Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-12-16 19:59:39 +00:00			`CONFIG_MMC3_CD_PIN="PH0"`
			`CONFIG_MMC3_PINS="PH"`
			`CONFIG_MMC_SUNXI_SLOT_EXTRA=3`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_USB0_VBUS_PIN="PB9"`
			`CONFIG_USB0_VBUS_DET="PH5"`
sunxi: Convert CONFIG_SATAPWR to Kconfig Convert the CONFIG_SATAPWR into kconfig. Thanks to that, many SYS_EXTRA_OPTIONS can be removed from some defconfigs. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2017-04-02 10:59:09 +00:00			`CONFIG_SATAPWR="PC3"`
sunxi: Use the available Kconfig option for AHCI Use the already available Kconfig option for AHCI. Tested on the BananaPi. Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-10-31 20:05:09 +00:00			`CONFIG_AHCI=y`
Sync defconfig files by savedefconfig Generated by "tools/moveconfig -s". This will make config moves easier. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> 2016-12-07 13:10:25 +00:00			`# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set`
configs: Re-sync Signed-off-by: Tom Rini <trini@konsulko.com> 2017-03-13 17:48:42 +00:00			`CONFIG_SPL_I2C_SUPPORT=y`
ata: Migrate CONFIG_SCSI_AHCI to Kconfig And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> 2017-12-08 13:36:19 +00:00			`CONFIG_SCSI_AHCI=y`
sunxi: Fix PHY regression on A20-OLinuXino-Lime2 and A20-Olimex-SOM-EVB When moving the PHYLIB PHY drivers around in Kconfig we did not at the same time perform a careful migration of the related drivers and sub-options. This lead to the case where previously Kconfig-enabled driver choices were now disabled on some platforms. Correct this by enabling both the PHY driver and sub-option on the above referenced platforms. Fixes: af2cbfd6b982 ("drivers: net: Provide Kconfig menu for PHYLIB") Fixes: 8728c97eff5b ("configs: Re-sync") Reported-by: Dario <dario86@tutamail.com> Signed-off-by: Tom Rini <trini@konsulko.com> 2020-04-24 16:30:45 +00:00			`CONFIG_PHY_REALTEK=y`
			`CONFIG_RTL8211X_PHY_FORCE_MASTER=y`
sunxi: Add support for the Olimex A20 EVB Signed-off-by: Marcus Cooper <codekipper@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2015-08-26 18:38:33 +00:00			`CONFIG_ETH_DESIGNWARE=y`
sunxi: Convert CONFIG_RGMII to Kconfig Convert CONFIG_RGMII to Kconfig. Thanks to that, it is possible to update defconfig files of SYS_EXTRA_OPTIONS accordingly and remove it when it is possible. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2017-04-02 10:59:08 +00:00			`CONFIG_RGMII=y`
Convert CONFIG_MII et al to Kconfig This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 2018-07-21 04:03:57 +00:00			`CONFIG_MII=y`
sunxi: Move SUNXI_GMAC to Kconfig Move the SUNXI_GMAC config option to Kconfig, remove it from SYS_EXTRA_OPTIONS and rename it into SUN7I_GMAC. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> 2017-04-02 10:59:03 +00:00			`CONFIG_SUN7I_GMAC=y`
sunxi: Olimex A20 boards: Enable LDO3 and LDO4 regulators Sets LDO3 and LDO4 regulators at 2.8V. In the current config these are off. This causes kernel to hang during axp209 initialization. Signed-off-by: Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> 2016-05-23 06:49:47 +00:00			`CONFIG_AXP_ALDO3_VOLT=2800`
			`CONFIG_AXP_ALDO4_VOLT=2800`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2017-08-11 15:20:19 +00:00			`CONFIG_SCSI=y`
configs: Resync with savedefconfig Signed-off-by: Tom Rini <trini@konsulko.com> 2016-09-08 20:11:59 +00:00			`CONFIG_USB_EHCI_HCD=y`
configs: Resync with savedefconfig Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 2019-02-07 19:53:03 +00:00			`CONFIG_USB_OHCI_HCD=y`