Minal Shah ff66a3c86e ARM: dts: dra7: add support for parallel NAND flash ... DRA7xx platform has in-build GPMC and ELM h/w engines which can be used for accessing externel NAND flash device. This patch: - adds generic DT binding in dra7.dtsi for enabling GPMC and ELM h/w engines - adds DT binding for Micron NAND Flash (MT29F2G16AADWP) present on dra7-evm *Important* On DRA7 EVM, GPMC_WPN and NAND_BOOTn are controlled by DIP switch So following board settings are required for NAND device detection: SW5.9 (GPMC_WPN) = LOW SW5.1 (NAND_BOOTn) = HIGH Signed-off-by: Minal Shah <minalkshah@gmail.com> Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com>		2014-05-19 17:20:31 -07:00
..
bootp
compressed	ARM: 7992/1: boot: compressed: ignore bswapsdi2.S	2014-03-07 22:04:10 +00:00
dts	ARM: dts: dra7: add support for parallel NAND flash	2014-05-19 17:20:31 -07:00
.gitignore
install.sh	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00
Makefile	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00