forked from Minki/linux
a252ccd3d2
The first 128 MiB of RAM can be accessed using an alias at address 0x0. In theory we could access whole RAM using 0x80000000 - 0xbfffffff range (up to 1 GiB) but it doesn't seem to work on Northstar. For some reason (hardware setup left by the bootloader maybe?) 0x80000000 - 0x87ffffff range can't be used. I reproduced this problem on: 1) Buffalo WZR-600DHP2 (BCM47081) 2) Netgear R6250 (BCM4708) 3) D-Link DIR-885L (BCM47094) So it seems we're forced to access first 128 MiB using alias at 0x0 and the rest using real base address + 128 MiB offset which is 0x88000000. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Jon Mason <jon.mason@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
126 lines
2.4 KiB
Plaintext
126 lines
2.4 KiB
Plaintext
/*
|
|
* Broadcom BCM470X / BCM5301X ARM platform code.
|
|
* DTS for Buffalo WZR-600DHP2
|
|
*
|
|
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
|
*
|
|
* Licensed under the GNU/GPL. See COPYING for details.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "bcm47081.dtsi"
|
|
#include "bcm5301x-nand-cs0-bch8.dtsi"
|
|
|
|
/ {
|
|
compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
|
|
model = "Buffalo WZR-600DHP2 (BCM47081)";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200 earlycon";
|
|
};
|
|
|
|
memory {
|
|
reg = <0x00000000 0x08000000
|
|
0x88000000 0x08000000>;
|
|
};
|
|
|
|
spi {
|
|
compatible = "spi-gpio";
|
|
num-chipselects = <1>;
|
|
gpio-sck = <&chipcommon 7 0>;
|
|
gpio-mosi = <&chipcommon 4 0>;
|
|
cs-gpios = <&chipcommon 6 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hc595: gpio_spi@0 {
|
|
compatible = "fairchild,74hc595";
|
|
reg = <0>;
|
|
registers-number = <1>;
|
|
spi-max-frequency = <100000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power0 {
|
|
label = "bcm53xx:green:power";
|
|
gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
power1 {
|
|
label = "bcm53xx:red:power";
|
|
gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
router0 {
|
|
label = "bcm53xx:green:router";
|
|
gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
router1 {
|
|
label = "bcm53xx:amber:router";
|
|
gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
wan {
|
|
label = "bcm53xx:green:wan";
|
|
gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
|
|
wireless0 {
|
|
label = "bcm53xx:green:wireless";
|
|
gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
|
|
wireless1 {
|
|
label = "bcm53xx:amber:wireless";
|
|
gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "default-off";
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
aoss {
|
|
label = "AOSS";
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
restart {
|
|
label = "Reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/* Switch device mode? */
|
|
mode {
|
|
label = "Mode";
|
|
linux,code = <KEY_SETUP>;
|
|
gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
eject {
|
|
label = "USB eject";
|
|
linux,code = <KEY_EJECTCD>;
|
|
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|