forked from Minki/linux
20b2af32ff
Add phylib support for the Marvell Alaska X 10 Gigabit PHY (MV88X3310). This phy is able to operate at 10G, 1G, 100M and 10M speeds, and only supports Clause 45 accesses. The PHY appears (based on the vendor IDs) to be two different vendors IP, with each devad containing several instances. This PHY driver has only been tested with the RJ45 copper port, fiber port and a Marvell Armada 8040-based ethernet interface. It should be noted that to use the full range of speeds, MAC drivers need to also reconfigure the link mode as per phydev->interface, since the PHY automatically changes its interface mode depending on the negotiated speed. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
74 lines
2.7 KiB
Makefile
74 lines
2.7 KiB
Makefile
# Makefile for Linux PHY drivers and MDIO bus drivers
|
|
|
|
libphy-y := phy.o phy-c45.o phy-core.o phy_device.o
|
|
mdio-bus-y += mdio_bus.o mdio_device.o
|
|
|
|
ifdef CONFIG_MDIO_DEVICE
|
|
obj-y += mdio-boardinfo.o
|
|
endif
|
|
|
|
# PHYLIB implies MDIO_DEVICE, in that case, we have a bunch of circular
|
|
# dependencies that does not make it possible to split mdio-bus objects into a
|
|
# dedicated loadable module, so we bundle them all together into libphy.ko
|
|
ifdef CONFIG_PHYLIB
|
|
libphy-y += $(mdio-bus-y)
|
|
else
|
|
obj-$(CONFIG_MDIO_DEVICE) += mdio-bus.o
|
|
endif
|
|
libphy-$(CONFIG_SWPHY) += swphy.o
|
|
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
|
|
|
|
obj-$(CONFIG_PHYLIB) += libphy.o
|
|
|
|
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
|
|
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
|
|
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
|
|
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
|
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
|
|
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
|
|
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
|
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
|
|
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
|
|
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
|
|
|
|
obj-$(CONFIG_AMD_PHY) += amd.o
|
|
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
|
|
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
|
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
|
|
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
|
|
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
|
|
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
|
|
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
|
|
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
|
|
obj-$(CONFIG_CICADA_PHY) += cicada.o
|
|
obj-$(CONFIG_CORTINA_PHY) += cortina.o
|
|
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
|
|
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
|
obj-$(CONFIG_DP83848_PHY) += dp83848.o
|
|
obj-$(CONFIG_DP83867_PHY) += dp83867.o
|
|
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
|
|
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
|
|
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
|
|
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
|
obj-$(CONFIG_LXT_PHY) += lxt.o
|
|
obj-$(CONFIG_MARVELL_PHY) += marvell.o
|
|
obj-$(CONFIG_MARVELL_10G_PHY) += marvell10g.o
|
|
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
|
|
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
|
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
|
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
|
|
obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
|
|
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
|
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_SMSC_PHY) += smsc.o
|
|
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
|
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
|
|
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
|
|
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
|