forked from Minki/linux
efe9711214
Control Flow Integrity(CFI) is a security mechanism that disallows changes to the original control flow graph of a compiled binary, making it significantly harder to perform such attacks. init_state_node() assign same function callback to different function pointer declarations. static int init_state_node(struct cpuidle_state *idle_state, const struct of_device_id *matches, struct device_node *state_node) { ... idle_state->enter = match_id->data; ... idle_state->enter_s2idle = match_id->data; } Function declarations: struct cpuidle_state { ... int (*enter) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); void (*enter_s2idle) (struct cpuidle_device *dev, struct cpuidle_driver *drv, int index); }; In this case, either enter() or enter_s2idle() would cause CFI check failed since they use same callee. Align function prototype of enter() since it needs return value for some use cases. The return value of enter_s2idle() is no need currently. Signed-off-by: Neal Liu <neal.liu@mediatek.com> Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
394 lines
9.2 KiB
C
394 lines
9.2 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* CPU idle driver for Tegra CPUs
|
|
*
|
|
* Copyright (c) 2010-2013, NVIDIA Corporation.
|
|
* Copyright (c) 2011 Google, Inc.
|
|
* Author: Colin Cross <ccross@android.com>
|
|
* Gary King <gking@nvidia.com>
|
|
*
|
|
* Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
|
|
*
|
|
* Tegra20/124 driver unification by Dmitry Osipenko <digetx@gmail.com>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "tegra-cpuidle: " fmt
|
|
|
|
#include <linux/atomic.h>
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/clk/tegra.h>
|
|
#include <linux/firmware/trusted_foundations.h>
|
|
|
|
#include <soc/tegra/cpuidle.h>
|
|
#include <soc/tegra/flowctrl.h>
|
|
#include <soc/tegra/fuse.h>
|
|
#include <soc/tegra/irq.h>
|
|
#include <soc/tegra/pm.h>
|
|
#include <soc/tegra/pmc.h>
|
|
|
|
#include <asm/cpuidle.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/smp_plat.h>
|
|
#include <asm/suspend.h>
|
|
|
|
enum tegra_state {
|
|
TEGRA_C1,
|
|
TEGRA_C7,
|
|
TEGRA_CC6,
|
|
TEGRA_STATE_COUNT,
|
|
};
|
|
|
|
static atomic_t tegra_idle_barrier;
|
|
static atomic_t tegra_abort_flag;
|
|
|
|
static inline bool tegra_cpuidle_using_firmware(void)
|
|
{
|
|
return firmware_ops->prepare_idle && firmware_ops->do_idle;
|
|
}
|
|
|
|
static void tegra_cpuidle_report_cpus_state(void)
|
|
{
|
|
unsigned long cpu, lcpu, csr;
|
|
|
|
for_each_cpu(lcpu, cpu_possible_mask) {
|
|
cpu = cpu_logical_map(lcpu);
|
|
csr = flowctrl_read_cpu_csr(cpu);
|
|
|
|
pr_err("cpu%lu: online=%d flowctrl_csr=0x%08lx\n",
|
|
cpu, cpu_online(lcpu), csr);
|
|
}
|
|
}
|
|
|
|
static int tegra_cpuidle_wait_for_secondary_cpus_parking(void)
|
|
{
|
|
unsigned int retries = 3;
|
|
|
|
while (retries--) {
|
|
unsigned int delay_us = 10;
|
|
unsigned int timeout_us = 500 * 1000 / delay_us;
|
|
|
|
/*
|
|
* The primary CPU0 core shall wait for the secondaries
|
|
* shutdown in order to power-off CPU's cluster safely.
|
|
* The timeout value depends on the current CPU frequency,
|
|
* it takes about 40-150us in average and over 1000us in
|
|
* a worst case scenario.
|
|
*/
|
|
do {
|
|
if (tegra_cpu_rail_off_ready())
|
|
return 0;
|
|
|
|
udelay(delay_us);
|
|
|
|
} while (timeout_us--);
|
|
|
|
pr_err("secondary CPU taking too long to park\n");
|
|
|
|
tegra_cpuidle_report_cpus_state();
|
|
}
|
|
|
|
pr_err("timed out waiting secondaries to park\n");
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void tegra_cpuidle_unpark_secondary_cpus(void)
|
|
{
|
|
unsigned int cpu, lcpu;
|
|
|
|
for_each_cpu(lcpu, cpu_online_mask) {
|
|
cpu = cpu_logical_map(lcpu);
|
|
|
|
if (cpu > 0) {
|
|
tegra_enable_cpu_clock(cpu);
|
|
tegra_cpu_out_of_reset(cpu);
|
|
flowctrl_write_cpu_halt(cpu, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int tegra_cpuidle_cc6_enter(unsigned int cpu)
|
|
{
|
|
int ret;
|
|
|
|
if (cpu > 0) {
|
|
ret = cpu_suspend(cpu, tegra_pm_park_secondary_cpu);
|
|
} else {
|
|
ret = tegra_cpuidle_wait_for_secondary_cpus_parking();
|
|
if (!ret)
|
|
ret = tegra_pm_enter_lp2();
|
|
|
|
tegra_cpuidle_unpark_secondary_cpus();
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tegra_cpuidle_c7_enter(void)
|
|
{
|
|
int err;
|
|
|
|
if (tegra_cpuidle_using_firmware()) {
|
|
err = call_firmware_op(prepare_idle, TF_PM_MODE_LP2_NOFLUSH_L2);
|
|
if (err)
|
|
return err;
|
|
|
|
return call_firmware_op(do_idle, 0);
|
|
}
|
|
|
|
return cpu_suspend(0, tegra30_pm_secondary_cpu_suspend);
|
|
}
|
|
|
|
static int tegra_cpuidle_coupled_barrier(struct cpuidle_device *dev)
|
|
{
|
|
if (tegra_pending_sgi()) {
|
|
/*
|
|
* CPU got local interrupt that will be lost after GIC's
|
|
* shutdown because GIC driver doesn't save/restore the
|
|
* pending SGI state across CPU cluster PM. Abort and retry
|
|
* next time.
|
|
*/
|
|
atomic_set(&tegra_abort_flag, 1);
|
|
}
|
|
|
|
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
|
|
|
|
if (atomic_read(&tegra_abort_flag)) {
|
|
cpuidle_coupled_parallel_barrier(dev, &tegra_idle_barrier);
|
|
atomic_set(&tegra_abort_flag, 0);
|
|
return -EINTR;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_cpuidle_state_enter(struct cpuidle_device *dev,
|
|
int index, unsigned int cpu)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* CC6 state is the "CPU cluster power-off" state. In order to
|
|
* enter this state, at first the secondary CPU cores need to be
|
|
* parked into offline mode, then the last CPU should clean out
|
|
* remaining dirty cache lines into DRAM and trigger Flow Controller
|
|
* logic that turns off the cluster's power domain (which includes
|
|
* CPU cores, GIC and L2 cache).
|
|
*/
|
|
if (index == TEGRA_CC6) {
|
|
ret = tegra_cpuidle_coupled_barrier(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
local_fiq_disable();
|
|
tegra_pm_set_cpu_in_lp2();
|
|
cpu_pm_enter();
|
|
|
|
switch (index) {
|
|
case TEGRA_C7:
|
|
ret = tegra_cpuidle_c7_enter();
|
|
break;
|
|
|
|
case TEGRA_CC6:
|
|
ret = tegra_cpuidle_cc6_enter(cpu);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
cpu_pm_exit();
|
|
tegra_pm_clear_cpu_in_lp2();
|
|
local_fiq_enable();
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int tegra_cpuidle_adjust_state_index(int index, unsigned int cpu)
|
|
{
|
|
/*
|
|
* On Tegra30 CPU0 can't be power-gated separately from secondary
|
|
* cores because it gates the whole CPU cluster.
|
|
*/
|
|
if (cpu > 0 || index != TEGRA_C7 || tegra_get_chip_id() != TEGRA30)
|
|
return index;
|
|
|
|
/* put CPU0 into C1 if C7 is requested and secondaries are online */
|
|
if (!IS_ENABLED(CONFIG_PM_SLEEP) || num_online_cpus() > 1)
|
|
index = TEGRA_C1;
|
|
else
|
|
index = TEGRA_CC6;
|
|
|
|
return index;
|
|
}
|
|
|
|
static int tegra_cpuidle_enter(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
unsigned int cpu = cpu_logical_map(dev->cpu);
|
|
int err;
|
|
|
|
index = tegra_cpuidle_adjust_state_index(index, cpu);
|
|
if (dev->states_usage[index].disable)
|
|
return -1;
|
|
|
|
if (index == TEGRA_C1)
|
|
err = arm_cpuidle_simple_enter(dev, drv, index);
|
|
else
|
|
err = tegra_cpuidle_state_enter(dev, index, cpu);
|
|
|
|
if (err && (err != -EINTR || index != TEGRA_CC6))
|
|
pr_err_once("failed to enter state %d err: %d\n", index, err);
|
|
|
|
return err ? -1 : index;
|
|
}
|
|
|
|
static int tegra114_enter_s2idle(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
tegra_cpuidle_enter(dev, drv, index);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The previous versions of Tegra CPUIDLE driver used a different "legacy"
|
|
* terminology for naming of the idling states, while this driver uses the
|
|
* new terminology.
|
|
*
|
|
* Mapping of the old terms into the new ones:
|
|
*
|
|
* Old | New
|
|
* ---------
|
|
* LP3 | C1 (CPU core clock gating)
|
|
* LP2 | C7 (CPU core power gating)
|
|
* LP2 | CC6 (CPU cluster power gating)
|
|
*
|
|
* Note that that the older CPUIDLE driver versions didn't explicitly
|
|
* differentiate the LP2 states because these states either used the same
|
|
* code path or because CC6 wasn't supported.
|
|
*/
|
|
static struct cpuidle_driver tegra_idle_driver = {
|
|
.name = "tegra_idle",
|
|
.states = {
|
|
[TEGRA_C1] = ARM_CPUIDLE_WFI_STATE_PWR(600),
|
|
[TEGRA_C7] = {
|
|
.enter = tegra_cpuidle_enter,
|
|
.exit_latency = 2000,
|
|
.target_residency = 2200,
|
|
.power_usage = 100,
|
|
.flags = CPUIDLE_FLAG_TIMER_STOP,
|
|
.name = "C7",
|
|
.desc = "CPU core powered off",
|
|
},
|
|
[TEGRA_CC6] = {
|
|
.enter = tegra_cpuidle_enter,
|
|
.exit_latency = 5000,
|
|
.target_residency = 10000,
|
|
.power_usage = 0,
|
|
.flags = CPUIDLE_FLAG_TIMER_STOP |
|
|
CPUIDLE_FLAG_COUPLED,
|
|
.name = "CC6",
|
|
.desc = "CPU cluster powered off",
|
|
},
|
|
},
|
|
.state_count = TEGRA_STATE_COUNT,
|
|
.safe_state_index = TEGRA_C1,
|
|
};
|
|
|
|
static inline void tegra_cpuidle_disable_state(enum tegra_state state)
|
|
{
|
|
cpuidle_driver_state_disabled(&tegra_idle_driver, state, true);
|
|
}
|
|
|
|
/*
|
|
* Tegra20 HW appears to have a bug such that PCIe device interrupts, whether
|
|
* they are legacy IRQs or MSI, are lost when CC6 is enabled. To work around
|
|
* this, simply disable CC6 if the PCI driver and DT node are both enabled.
|
|
*/
|
|
void tegra_cpuidle_pcie_irqs_in_use(void)
|
|
{
|
|
struct cpuidle_state *state_cc6 = &tegra_idle_driver.states[TEGRA_CC6];
|
|
|
|
if ((state_cc6->flags & CPUIDLE_FLAG_UNUSABLE) ||
|
|
tegra_get_chip_id() != TEGRA20)
|
|
return;
|
|
|
|
pr_info("disabling CC6 state, since PCIe IRQs are in use\n");
|
|
tegra_cpuidle_disable_state(TEGRA_CC6);
|
|
}
|
|
|
|
static void tegra_cpuidle_setup_tegra114_c7_state(void)
|
|
{
|
|
struct cpuidle_state *s = &tegra_idle_driver.states[TEGRA_C7];
|
|
|
|
s->enter_s2idle = tegra114_enter_s2idle;
|
|
s->target_residency = 1000;
|
|
s->exit_latency = 500;
|
|
}
|
|
|
|
static int tegra_cpuidle_probe(struct platform_device *pdev)
|
|
{
|
|
/* LP2 could be disabled in device-tree */
|
|
if (tegra_pmc_get_suspend_mode() < TEGRA_SUSPEND_LP2)
|
|
tegra_cpuidle_disable_state(TEGRA_CC6);
|
|
|
|
/*
|
|
* Required suspend-resume functionality, which is provided by the
|
|
* Tegra-arch core and PMC driver, is unavailable if PM-sleep option
|
|
* is disabled.
|
|
*/
|
|
if (!IS_ENABLED(CONFIG_PM_SLEEP)) {
|
|
if (!tegra_cpuidle_using_firmware())
|
|
tegra_cpuidle_disable_state(TEGRA_C7);
|
|
|
|
tegra_cpuidle_disable_state(TEGRA_CC6);
|
|
}
|
|
|
|
/*
|
|
* Generic WFI state (also known as C1 or LP3) and the coupled CPU
|
|
* cluster power-off (CC6 or LP2) states are common for all Tegra SoCs.
|
|
*/
|
|
switch (tegra_get_chip_id()) {
|
|
case TEGRA20:
|
|
/* Tegra20 isn't capable to power-off individual CPU cores */
|
|
tegra_cpuidle_disable_state(TEGRA_C7);
|
|
break;
|
|
|
|
case TEGRA30:
|
|
break;
|
|
|
|
case TEGRA114:
|
|
case TEGRA124:
|
|
tegra_cpuidle_setup_tegra114_c7_state();
|
|
|
|
/* coupled CC6 (LP2) state isn't implemented yet */
|
|
tegra_cpuidle_disable_state(TEGRA_CC6);
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return cpuidle_register(&tegra_idle_driver, cpu_possible_mask);
|
|
}
|
|
|
|
static struct platform_driver tegra_cpuidle_driver = {
|
|
.probe = tegra_cpuidle_probe,
|
|
.driver = {
|
|
.name = "tegra-cpuidle",
|
|
},
|
|
};
|
|
builtin_platform_driver(tegra_cpuidle_driver);
|