forked from Minki/linux
f7ca8e3b94
The SoC hix5hd2 compatible string has the suffix "-gmac" and
we should not change its compatible string.
So we should name all the compatible string with the suffix "-gmac".
Creating a new name suffix "-gemac" is unnecessary.
We also add another SoC compatible string in dt binding documentation
and describe which generic version the SoC belongs to.
Fixes: d0fb6ba75d ("net: hix5hd2_gmac: add generic compatible string")
Signed-off-by: Dongpo Li <lidongpo@hisilicon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
59 lines
2.1 KiB
Plaintext
59 lines
2.1 KiB
Plaintext
Hisilicon hix5hd2 gmac controller
|
|
|
|
Required properties:
|
|
- compatible: should contain one of the following SoC strings:
|
|
* "hisilicon,hix5hd2-gmac"
|
|
* "hisilicon,hi3798cv200-gmac"
|
|
* "hisilicon,hi3516a-gmac"
|
|
and one of the following version string:
|
|
* "hisilicon,hisi-gmac-v1"
|
|
* "hisilicon,hisi-gmac-v2"
|
|
The version v1 includes SoCs hix5hd2.
|
|
The version v2 includes SoCs hi3798cv200, hi3516a.
|
|
- reg: specifies base physical address(s) and size of the device registers.
|
|
The first region is the MAC register base and size.
|
|
The second region is external interface control register.
|
|
- interrupts: should contain the MAC interrupt.
|
|
- #address-cells: must be <1>.
|
|
- #size-cells: must be <0>.
|
|
- phy-mode: see ethernet.txt [1].
|
|
- phy-handle: see ethernet.txt [1].
|
|
- mac-address: see ethernet.txt [1].
|
|
- clocks: clock phandle and specifier pair.
|
|
- clock-names: contain the clock name "mac_core"(required) and "mac_ifc"(optional).
|
|
- resets: should contain the phandle to the MAC core reset signal(optional),
|
|
the MAC interface reset signal(optional)
|
|
and the PHY reset signal(optional).
|
|
- reset-names: contain the reset signal name "mac_core"(optional),
|
|
"mac_ifc"(optional) and "phy"(optional).
|
|
- hisilicon,phy-reset-delays-us: triplet of delays if PHY reset signal given.
|
|
The 1st cell is reset pre-delay in micro seconds.
|
|
The 2nd cell is reset pulse in micro seconds.
|
|
The 3rd cell is reset post-delay in micro seconds.
|
|
|
|
- PHY subnode: inherits from phy binding [2]
|
|
|
|
[1] Documentation/devicetree/bindings/net/ethernet.txt
|
|
[2] Documentation/devicetree/bindings/net/phy.txt
|
|
|
|
Example:
|
|
gmac0: ethernet@f9840000 {
|
|
compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2";
|
|
reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
|
|
interrupts = <0 71 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy2>;
|
|
mac-address = [00 00 00 00 00 00];
|
|
clocks = <&crg HISTB_ETH0_MAC_CLK>, <&crg HISTB_ETH0_MACIF_CLK>;
|
|
clock-names = "mac_core", "mac_ifc";
|
|
resets = <&crg 0xcc 8>, <&crg 0xcc 10>, <&crg 0xcc 12>;
|
|
reset-names = "mac_core", "mac_ifc", "phy";
|
|
hisilicon,phy-reset-delays-us = <10000 10000 30000>;
|
|
|
|
phy2: ethernet-phy@2 {
|
|
reg = <2>;
|
|
};
|
|
};
|