linux/arch/mips/loongson/common/dma-swiotlb.c
Huacai Chen f490682a6b MIPS: Loongson-3: Add PHYS48_TO_HT40 support
The width of HT-bus is only 40-bit, but Loongson-3 has 48-bit physical
address. This implies only node-0's memory is DMAable because high bits
(Node ID) will lost. Fortunately, by configuring address windows in
firmware, we can extract 2bit Node ID (bit 44~47, only bit 44~45 used
now) from Loongson-3's 48-bit address space and embed it into 40-bit
(bit 37~38). Every NUMA node can do DMA now (however, maximum memory of
each node is reduced to 2^37 = 128GB).

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/8321/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24 07:45:01 +01:00

151 lines
3.7 KiB
C

#include <linux/mm.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/swiotlb.h>
#include <linux/bootmem.h>
#include <asm/bootinfo.h>
#include <boot_param.h>
#include <dma-coherence.h>
static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
{
void *ret;
if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
return ret;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
#ifdef CONFIG_ISA
if (dev == NULL)
gfp |= __GFP_DMA;
else
#endif
#ifdef CONFIG_ZONE_DMA
if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
gfp |= __GFP_DMA;
else
#endif
#ifdef CONFIG_ZONE_DMA32
if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
gfp |= __GFP_DMA32;
else
#endif
;
gfp |= __GFP_NORETRY;
ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
mb();
return ret;
}
static void loongson_dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
{
int order = get_order(size);
if (dma_release_from_coherent(dev, order, vaddr))
return;
swiotlb_free_coherent(dev, size, vaddr, dma_handle);
}
static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction dir,
struct dma_attrs *attrs)
{
dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
dir, attrs);
mb();
return daddr;
}
static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir,
struct dma_attrs *attrs)
{
int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
mb();
return r;
}
static void loongson_dma_sync_single_for_device(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
{
swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
mb();
}
static void loongson_dma_sync_sg_for_device(struct device *dev,
struct scatterlist *sg, int nents,
enum dma_data_direction dir)
{
swiotlb_sync_sg_for_device(dev, sg, nents, dir);
mb();
}
static int loongson_dma_set_mask(struct device *dev, u64 mask)
{
if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits)) {
*dev->dma_mask = DMA_BIT_MASK(loongson_sysconf.dma_mask_bits);
return -EIO;
}
*dev->dma_mask = mask;
return 0;
}
dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
long nid;
#ifdef CONFIG_PHYS48_TO_HT40
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
nid = (paddr >> 44) & 0x3;
paddr = ((nid << 44) ^ paddr) | (nid << 37);
#endif
return paddr;
}
phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
long nid;
#ifdef CONFIG_PHYS48_TO_HT40
/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
* Loongson-3's 48bit address space and embed it into 40bit */
nid = (daddr >> 37) & 0x3;
daddr = ((nid << 37) ^ daddr) | (nid << 44);
#endif
return daddr;
}
static struct dma_map_ops loongson_dma_map_ops = {
.alloc = loongson_dma_alloc_coherent,
.free = loongson_dma_free_coherent,
.map_page = loongson_dma_map_page,
.unmap_page = swiotlb_unmap_page,
.map_sg = loongson_dma_map_sg,
.unmap_sg = swiotlb_unmap_sg_attrs,
.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
.sync_single_for_device = loongson_dma_sync_single_for_device,
.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
.sync_sg_for_device = loongson_dma_sync_sg_for_device,
.mapping_error = swiotlb_dma_mapping_error,
.dma_supported = swiotlb_dma_supported,
.set_dma_mask = loongson_dma_set_mask
};
void __init plat_swiotlb_setup(void)
{
swiotlb_init(1);
mips_dma_map_ops = &loongson_dma_map_ops;
}