linux/drivers/net/wireless/rt2x00
Stanislaw Gruszka fdbdd25c47 rt2x00: do not pause queue on flush
Pausing queue on flush make no sense since txdone procedure un-pause
queue. Before flush procedure we have to assure queue is stopped,
i.e. on receive path h/w RX is disabled, on transmit path queue is
disabled in mac80211. That conditions are true except one function:
rt2x00usb_watchdog_tx_dma(), so add stop/start queue there.

Note stop/start queue can be racy if we do this from multiple paths,
but currently we stop TX queues only on rt2x00lib_disable_radio(),
which also stop/sync watchdog, hance we have no race condition.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10 13:49:28 -04:00
..
Kconfig Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless 2013-07-25 16:48:01 -04:00
Makefile rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs 2013-04-03 14:50:06 -04:00
rt2x00.h rt2x00: rt2800lib: add default_power3 field for three-chain devices 2013-07-22 16:54:33 -04:00
rt2x00config.c mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chan 2013-03-25 19:19:35 +01:00
rt2x00crypto.c
rt2x00debug.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00debug.h rt2x00: Add debugfs access for rfcsr register 2012-05-08 21:53:46 -04:00
rt2x00dev.c drivers/net: Convert uses of compare_ether_addr to ether_addr_equal 2013-09-03 22:28:04 -04:00
rt2x00dump.h
rt2x00firmware.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00leds.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00leds.h
rt2x00lib.h rt2x00: Use GFP_KERNEL for rx buffer allocation on USB devices 2012-04-23 15:35:29 -04:00
rt2x00link.c
rt2x00mac.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00mmio.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00mmio.h rt2x00: rt2x00mmio: remove unused rt2x00pci_* defines 2013-04-10 14:10:32 -04:00
rt2x00pci.c rt2x00_pci: Fix interrupt handler name (visible at /proc/interrupts) 2013-10-10 13:43:35 -04:00
rt2x00pci.h rt2x00: rt2x00pci: fix build error on Ralink RT3x5x SoCs 2013-04-03 14:50:06 -04:00
rt2x00queue.c rt2x00: do not pause queue on flush 2013-10-10 13:49:28 -04:00
rt2x00queue.h rt2x00: remove data_queue_desc struct 2013-06-12 14:59:38 -04:00
rt2x00reg.h
rt2x00soc.c rt2x00: Use more current logging styles, shrink object size 2013-04-22 15:20:26 -04:00
rt2x00soc.h
rt2x00usb.c rt2x00: do not pause queue on flush 2013-10-10 13:49:28 -04:00
rt2x00usb.h
rt61pci.c rt2x00: read 5GHz TX power values from the correct offset 2013-06-24 14:44:25 -04:00
rt61pci.h rt2x00: Unify GPIO register field namings 2012-09-07 15:08:40 -04:00
rt73usb.c rt2x00: read 5GHz TX power values from the correct offset 2013-06-24 14:44:25 -04:00
rt73usb.h rt2x00: Unify GPIO register field namings 2012-09-07 15:08:40 -04:00
rt2400pci.c rt2x00: move extra_tx_headroom field from rt2x00_ops to rt2x00_dev 2013-06-12 15:02:15 -04:00
rt2400pci.h rt2x00: Unify GPIO register field namings 2012-09-07 15:08:40 -04:00
rt2500pci.c rt2x00: move extra_tx_headroom field from rt2x00_ops to rt2x00_dev 2013-06-12 15:02:15 -04:00
rt2500pci.h rt2x00: Unify GPIO register field namings 2012-09-07 15:08:40 -04:00
rt2500usb.c rt2x00: move extra_tx_headroom field from rt2x00_ops to rt2x00_dev 2013-06-12 15:02:15 -04:00
rt2500usb.h rt2x00: Unify GPIO register field namings 2012-09-07 15:08:40 -04:00
rt2800.h rt2800: add support for radio chip RF3070 2013-10-03 16:24:26 -04:00
rt2800lib.c rt2x00: rt2800lib: fix default VGC values for RT3572 for the 5GHz band 2013-10-10 13:49:28 -04:00
rt2800lib.h rt2x00: rt2800lib: introduce rt2800_get_txwi_rxwi_size helper 2013-08-16 14:17:50 -04:00
rt2800pci.c rt2x00: rt2800pci: fix AUX_CTRL register setup for RT3090/3390/3593/5592 2013-08-16 14:17:51 -04:00
rt2800pci.h rt2x00 : RT3290 chip support v4 2012-06-20 14:41:49 -04:00
rt2800usb.c wireless: rt2x00: rt2800usb: add new devices 2013-10-03 16:57:34 -04:00
rt2800usb.h