linux/drivers/tty/serial
Linus Torvalds fdb2f9c2eb PCI changes for the 3.7 merge window:
Host bridge hotplug
     - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
     - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu)
     - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
     - Use standard list ops for acpi_pci_drivers (Jiang Liu)
 
   Device hotplug
     - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu)
     - Remove fakephp driver (Bjorn Helgaas)
     - Fix VGA ref count in hotplug remove path (Yinghai Lu)
     - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu)
     - Implement resume regardless of pciehp_force param (Oliver Neukum)
     - Make pci_fixup_irqs() work after init (Thierry Reding)
 
   Miscellaneous
     - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
     - Factor out PCI Express Capability accessors (Jiang Liu)
     - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan)
     - Make pci_error_handlers const (Stephen Hemminger)
     - Cleanup drivers/pci/remove.c (Bjorn Helgaas)
     - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas)
     - Use standard list ops for bus->devices (Bjorn Helgaas)
     - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
     - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.10 (GNU/Linux)
 
 iQIcBAABAgAGBQJQac4hAAoJEPGMOI97Hn6zjZYP/iaqU9kjmgTsBbSyzB4oApv/
 RRxo3I+ad9GF6XlMQfVAtyx1pgCD1gdGAtoDgGSCTqgdYD3CO10AxKU+yleAk1wo
 dbMxLifJNTrT3G1mZ/NL16yEGhCwvhfwzRtB1VoZmCT4lSApO/7cJkXl2DzHfA/i
 pmltOOiQCN8kbUcJbVPtUyTVPi2zl/8bsyCyTkS7YG0VXeGRM+ZUvPWZJ7MnWYYB
 5qoCdrw5ENCCiDQ9yw5SAfgL23b+0p6OI/x3Lkex0QQOWwSqGSiaHt4b7eitrC5b
 2eAJg32f/AzZke1YbKLMfdsL0VJP3GAswhDVHlgmo63rZkOZChm+97dgZ35Mcv5v
 kEXkWyBb1xJ3t8rZir6Qer9Iv2wOB+MkZ5qtU/Vf+l0wLQLYTrRVsKngrEDREONk
 dXbokp6iVSPeA1sTSdH9MmHlTUIj82ZLSGcxcjTsN8NWZjxx6g3rNx1uay+5MYOW
 4ET9zNu5snrAqN6N4Tb81gvtG8qYfxzdvVfrA9AaGKI6xxB7jkqgFJRp55JiEcFc
 x4cmWkhvdlhVsG2TQwFxYNfswOqD+7NCs6V4kSVZX6ezpDrH7I5VvcnnhstF7C8l
 KZul0EV7OW+kDK23pNe24lVP2xtOv6G8eK/3PmeKIXWl1V83nqre/oLufRzTfs+Z
 SxkILwY/MFpuCFteKE1t
 =haBu
 -----END PGP SIGNATURE-----

Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Host bridge hotplug
    - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi)
    - Clear host bridge resource info to avoid issue when releasing
      (Yinghai Lu)
    - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu)
    - Use standard list ops for acpi_pci_drivers (Jiang Liu)

  Device hotplug
    - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang
      Liu)
    - Remove fakephp driver (Bjorn Helgaas)
    - Fix VGA ref count in hotplug remove path (Yinghai Lu)
    - Allow acpiphp to handle PCIe ports without native hotplug (Jiang
      Liu)
    - Implement resume regardless of pciehp_force param (Oliver Neukum)
    - Make pci_fixup_irqs() work after init (Thierry Reding)

  Miscellaneous
    - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang)
    - Factor out PCI Express Capability accessors (Jiang Liu)
    - Add pcibios_window_alignment() so powerpc EEH can use generic
      resource assignment (Gavin Shan)
    - Make pci_error_handlers const (Stephen Hemminger)
    - Cleanup drivers/pci/remove.c (Bjorn Helgaas)
    - Improve Vendor-Specific Extended Capability support (Bjorn
      Helgaas)
    - Use standard list ops for bus->devices (Bjorn Helgaas)
    - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang)
    - Reassign invalid bus number ranges (Intel DP43BF workaround)
      (Yinghai Lu)"

* tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits)
  PCI: acpiphp: Handle PCIe ports without native hotplug capability
  PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots
  PCI/ACPI: Protect acpi_pci_roots list with mutex
  PCI/ACPI: Use acpi_pci_root info rather than looking it up again
  PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface
  PCI/ACPI: Protect acpi_pci_drivers list with mutex
  PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges
  PCI/ACPI: Use normal list for struct acpi_pci_driver
  PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots
  PCI: Fix default vga ref_count
  ia64/PCI: Clear host bridge aperture struct resource
  x86/PCI: Clear host bridge aperture struct resource
  PCI: Stop all children first, before removing all children
  Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"
  PCI: Provide a default pcibios_update_irq()
  PCI: Discard __init annotations for pci_fixup_irqs() and related functions
  PCI: Use correct type when freeing bus resource list
  PCI: Check P2P bridge for invalid secondary/subordinate range
  PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes
  xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()
  ...
2012-10-01 12:05:36 -07:00
..
8250 make drivers with pci error handlers const 2012-09-07 16:35:00 -06:00
cpm_uart TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
jsm make drivers with pci error handlers const 2012-09-07 16:35:00 -06:00
21285.c Disintegrate asm/system.h for ARM 2012-03-28 18:30:01 +01:00
68328serial.c TTY: 68328serial, use tty_port_block_til_ready 2012-04-09 12:02:45 -07:00
altera_jtaguart.c Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6 2011-10-27 08:35:41 +02:00
altera_uart.c tty: serial: altera_uart: Check for NULL platform_data in probe. 2012-04-09 10:30:39 -07:00
amba-pl010.c serial: pl010: Enable module alias autogeneration for AMBA drivers 2011-11-22 10:58:32 +00:00
amba-pl011.c Merge branches 'audit', 'delay', 'fixes', 'misc' and 'sta2x11' into for-linus 2012-07-27 23:06:32 +01:00
apbuart.c apbuart: fix section mismatch warning 2011-12-27 16:33:13 -05:00
apbuart.h
ar933x_uart.c SERIAL: AR933X: Add driver for the built-in UART of the SoC 2011-12-07 22:02:46 +00:00
atmel_serial.c tty/serial: atmel_serial: fix RS485 half-duplex problem 2012-04-09 10:30:39 -07:00
bcm63xx_uart.c serial: bcm63xx_uart: fix irq storm after rx fifo overrun. 2011-06-16 12:01:58 -07:00
bfin_sport_uart.c serial: bfin-sport-uart: Add tty ASYNC_CTS_FLOW flag to do CTS flow control. 2011-12-09 19:05:33 -08:00
bfin_sport_uart.h tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled. 2011-12-09 19:05:33 -08:00
bfin_uart.c serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller. 2012-05-17 13:25:56 -07:00
clps711x.c ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset 2012-05-11 16:18:01 +02:00
crisv10.c tty: Revert the tty locking series, it needs more work 2012-06-02 15:21:43 -07:00
crisv10.h
dz.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
dz.h
efm32-uart.c serial/efm32: add new driver 2012-01-26 11:29:47 -08:00
icom.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
icom.h
ifx6x60.c serial: ifx6x60: fix paging fault on spi_register_driver 2012-08-10 13:19:31 -07:00
ifx6x60.h serial: ifx6x60: minor cleanup 2011-02-17 11:16:15 -08:00
imx.c tty: serial: imx: don't reinit clock in imx_setup_ufcr() 2012-09-05 12:44:44 -07:00
ioc3_serial.c TTY: serial, fix includes in some drivers 2011-09-22 15:49:26 -07:00
ioc4_serial.c TTY: remove serialP.h inclusion from some files 2012-03-08 11:47:02 -08:00
ip22zilog.c Fix common misspellings 2011-03-31 11:26:23 -03:00
ip22zilog.h
Kconfig serial: Change Kconfig entry for CLPS711X-target 2012-08-10 13:19:31 -07:00
kgdboc.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
lantiq.c SERIAL: MIPS: lantiq: implement OF support 2012-05-21 14:31:54 +01:00
m32r_sio_reg.h m32r: relocate drivers back out of 8250 dir 2012-02-08 15:04:32 -08:00
m32r_sio.c TTY: remove serialP.h inclusion from some files 2012-03-08 11:47:02 -08:00
m32r_sio.h TTY: serial, include pci.h in m32r_sio 2012-03-08 11:47:02 -08:00
Makefile Merge tag 'tty-3.3-rc3' tty-next 2012-02-10 10:25:27 -08:00
max3100.c TTY: Remove redundant spi driver bus initialization 2011-11-26 20:19:21 -08:00
max3107.c TTY: Remove redundant spi driver bus initialization 2011-11-26 20:19:21 -08:00
max3107.h Fix common misspellings 2011-03-31 11:26:23 -03:00
mcf.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
mfd.c simple_open: automatically convert to simple_open() 2012-04-05 15:25:50 -07:00
mpc52xx_uart.c mpc5200b/uart: select more tolerant uart prescaler on low baudrates 2012-03-08 13:15:50 -08:00
mpsc.c
mrst_max3110.c TTY: Remove redundant spi driver bus initialization 2011-11-26 20:19:21 -08:00
mrst_max3110.h max3110: add sysrq support 2011-08-26 11:01:15 -07:00
msm_serial_hs.c Remove all #inclusions of asm/system.h 2012-03-28 18:30:03 +01:00
msm_serial.c Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-soc 2011-11-01 21:02:35 -07:00
msm_serial.h tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
msm_smd_tty.c TTY: remove re-assignments to tty_driver members 2012-03-08 11:37:58 -08:00
mux.c tty/serial/mux.c: linux/tty.h included twice 2012-02-24 13:50:45 -08:00
mxs-auart.c serial: mxs-auart: fix the wrong RTS hardware flow control 2012-08-16 12:15:33 -07:00
netx-serial.c tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
nwpserial.c tty: Add export.h for EXPORT_SYMBOL/THIS_MODULE to exporters 2011-10-31 19:31:28 -04:00
of_serial.c serial/of-serial: Add LPC3220 standard UART compatible string 2012-07-26 13:37:02 -07:00
omap-serial.c Merge 3.4-rc3 into tty-next 2012-04-18 15:57:31 -07:00
pch_uart.c pch_uart: Fix parity setting issue 2012-07-26 13:37:14 -07:00
pmac_zilog.c pmac_zilog,kdb: Fix console poll hook to return instead of loop 2012-08-16 12:20:20 -07:00
pmac_zilog.h tty/serial/pmac_zilog: Fix suspend & resume 2011-12-16 11:10:01 +11:00
pnx8xxx_uart.c
pxa.c ARM: device tree work 2012-03-27 16:47:35 -07:00
sa1100.c ARM: 7342/2: sa1100: prepare for sparse irq conversion 2012-03-25 23:57:20 +01:00
samsung.c serial: samsung: Fixed wrong comparison for baudclk_rate 2012-07-26 13:37:02 -07:00
samsung.h serial: samsung: merge probe() function from all SoC specific extensions 2011-12-23 10:07:00 +09:00
sb1250-duart.c SERIAL: MIPS Swarm sb1250-duart.c driver needs module.h 2012-05-15 17:48:50 +02:00
sc26xx.c TTY: serial: convert drivers/tty/serial/* to use module_platform_driver() 2011-11-30 20:11:46 +09:00
serial_core.c serial_core: Update buffer overrun statistics. 2012-07-26 13:37:02 -07:00
serial_ks8695.c TTY: irq: Remove IRQF_DISABLED 2011-09-22 16:08:57 -07:00
serial_txx9.c serial: fix serial_txx9.c build warning/typo 2012-06-12 15:41:18 -07:00
sh-sci.c serial: sh-sci: fix compilation breakage, when DMA is enabled 2012-08-01 13:48:54 +09:00
sh-sci.h serial: sh-sci: use serial_port_in/out vs sci_in/out. 2012-03-30 19:50:15 +09:00
sirfsoc_uart.c pinctrl: API changes to support multiple states per device 2012-03-05 11:22:59 +01:00
sirfsoc_uart.h serial/sirf: fixup for changes to pin control 2012-02-22 17:59:12 +01:00
sn_console.c Miscellaneous Itanium patches 2012-03-23 17:19:37 -07:00
suncore.c tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h 2012-02-10 10:44:35 -08:00
sunhv.c Disintegrate asm/system.h for Sparc 2012-03-28 18:30:03 +01:00
sunsab.c Disintegrate asm/system.h for Sparc 2012-03-28 18:30:03 +01:00
sunsab.h
sunsu.c Disintegrate asm/system.h for Sparc 2012-03-28 18:30:03 +01:00
sunzilog.c serial/sunzilog: fix keyboard on SUN SPARCstation 2012-04-04 00:37:10 -07:00
sunzilog.h
timbuart.c TTY: serial: convert drivers/tty/serial/* to use module_platform_driver() 2011-11-30 20:11:46 +09:00
timbuart.h
uartlite.c uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op 2012-07-19 10:39:42 -04:00
ucc_uart.c serial: Kill off NO_IRQ 2012-01-26 17:14:50 -08:00
vr41xx_siu.c serial: Kill off NO_IRQ 2012-01-26 17:14:50 -08:00
vt8500_serial.c tty: serial: vt8500: fix annotations for probe/remove 2012-03-12 10:21:55 -07:00
xilinx_uartps.c tty: Add module.h to drivers/tty users who just expect it there. 2011-10-31 19:31:27 -04:00
zs.c SERIAL: MIPS DECstation zs.c driver needs module.h 2012-05-15 17:48:50 +02:00
zs.h