linux/drivers/iio/adc/ad7766.c
Lars-Peter Clausen f11d59d87b iio: Move attach/detach of the poll func to the core
All devices using a triggered buffer need to attach and detach the trigger
to the device in order to properly work. Instead of doing this in each and
every driver by hand move this into the core.

At this point in time, all drivers should have been resolved to
attach/detach the poll-function in the same order.

This patch removes all explicit calls of iio_triggered_buffer_postenable()
& iio_triggered_buffer_predisable() in all drivers, since the core handles
now the pollfunc attach/detach.

The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's
not immediately obvious that removing the hooks doesn't break anything.
Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board.
All seems to be fine.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-20 17:34:44 +01:00

323 lines
7.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* AD7766/AD7767 SPI ADC driver
*
* Copyright 2016 Analog Devices Inc.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
struct ad7766_chip_info {
unsigned int decimation_factor;
};
enum {
AD7766_SUPPLY_AVDD = 0,
AD7766_SUPPLY_DVDD = 1,
AD7766_SUPPLY_VREF = 2,
AD7766_NUM_SUPPLIES = 3
};
struct ad7766 {
const struct ad7766_chip_info *chip_info;
struct spi_device *spi;
struct clk *mclk;
struct gpio_desc *pd_gpio;
struct regulator_bulk_data reg[AD7766_NUM_SUPPLIES];
struct iio_trigger *trig;
struct spi_transfer xfer;
struct spi_message msg;
/*
* DMA (thus cache coherency maintenance) requires the
* transfer buffers to live in their own cache lines.
* Make the buffer large enough for one 24 bit sample and one 64 bit
* aligned 64 bit timestamp.
*/
unsigned char data[ALIGN(3, sizeof(s64)) + sizeof(s64)]
____cacheline_aligned;
};
/*
* AD7766 and AD7767 variations are interface compatible, the main difference is
* analog performance. Both parts will use the same ID.
*/
enum ad7766_device_ids {
ID_AD7766,
ID_AD7766_1,
ID_AD7766_2,
};
static irqreturn_t ad7766_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = spi_sync(ad7766->spi, &ad7766->msg);
if (ret < 0)
goto done;
iio_push_to_buffers_with_timestamp(indio_dev, ad7766->data,
pf->timestamp);
done:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static int ad7766_preenable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable supplies: %d\n",
ret);
return ret;
}
ret = clk_prepare_enable(ad7766->mclk);
if (ret < 0) {
dev_err(&ad7766->spi->dev, "Failed to enable MCLK: %d\n", ret);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return ret;
}
gpiod_set_value(ad7766->pd_gpio, 0);
return 0;
}
static int ad7766_postdisable(struct iio_dev *indio_dev)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
gpiod_set_value(ad7766->pd_gpio, 1);
/*
* The PD pin is synchronous to the clock, so give it some time to
* notice the change before we disable the clock.
*/
msleep(20);
clk_disable_unprepare(ad7766->mclk);
regulator_bulk_disable(ARRAY_SIZE(ad7766->reg), ad7766->reg);
return 0;
}
static int ad7766_read_raw(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan, int *val, int *val2, long info)
{
struct ad7766 *ad7766 = iio_priv(indio_dev);
struct regulator *vref = ad7766->reg[AD7766_SUPPLY_VREF].consumer;
int scale_uv;
switch (info) {
case IIO_CHAN_INFO_SCALE:
scale_uv = regulator_get_voltage(vref);
if (scale_uv < 0)
return scale_uv;
*val = scale_uv / 1000;
*val2 = chan->scan_type.realbits;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = clk_get_rate(ad7766->mclk) /
ad7766->chip_info->decimation_factor;
return IIO_VAL_INT;
}
return -EINVAL;
}
static const struct iio_chan_spec ad7766_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
.scan_type = {
.sign = 's',
.realbits = 24,
.storagebits = 32,
.endianness = IIO_BE,
},
},
IIO_CHAN_SOFT_TIMESTAMP(1),
};
static const struct ad7766_chip_info ad7766_chip_info[] = {
[ID_AD7766] = {
.decimation_factor = 8,
},
[ID_AD7766_1] = {
.decimation_factor = 16,
},
[ID_AD7766_2] = {
.decimation_factor = 32,
},
};
static const struct iio_buffer_setup_ops ad7766_buffer_setup_ops = {
.preenable = &ad7766_preenable,
.postdisable = &ad7766_postdisable,
};
static const struct iio_info ad7766_info = {
.read_raw = &ad7766_read_raw,
};
static irqreturn_t ad7766_irq(int irq, void *private)
{
iio_trigger_poll(private);
return IRQ_HANDLED;
}
static int ad7766_set_trigger_state(struct iio_trigger *trig, bool enable)
{
struct ad7766 *ad7766 = iio_trigger_get_drvdata(trig);
if (enable)
enable_irq(ad7766->spi->irq);
else
disable_irq(ad7766->spi->irq);
return 0;
}
static const struct iio_trigger_ops ad7766_trigger_ops = {
.set_trigger_state = ad7766_set_trigger_state,
.validate_device = iio_trigger_validate_own_device,
};
static int ad7766_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
struct iio_dev *indio_dev;
struct ad7766 *ad7766;
int ret;
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*ad7766));
if (!indio_dev)
return -ENOMEM;
ad7766 = iio_priv(indio_dev);
ad7766->chip_info = &ad7766_chip_info[id->driver_data];
ad7766->mclk = devm_clk_get(&spi->dev, "mclk");
if (IS_ERR(ad7766->mclk))
return PTR_ERR(ad7766->mclk);
ad7766->reg[AD7766_SUPPLY_AVDD].supply = "avdd";
ad7766->reg[AD7766_SUPPLY_DVDD].supply = "dvdd";
ad7766->reg[AD7766_SUPPLY_VREF].supply = "vref";
ret = devm_regulator_bulk_get(&spi->dev, ARRAY_SIZE(ad7766->reg),
ad7766->reg);
if (ret)
return ret;
ad7766->pd_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown",
GPIOD_OUT_HIGH);
if (IS_ERR(ad7766->pd_gpio))
return PTR_ERR(ad7766->pd_gpio);
indio_dev->name = spi_get_device_id(spi)->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad7766_channels;
indio_dev->num_channels = ARRAY_SIZE(ad7766_channels);
indio_dev->info = &ad7766_info;
if (spi->irq > 0) {
ad7766->trig = devm_iio_trigger_alloc(&spi->dev, "%s-dev%d",
indio_dev->name, indio_dev->id);
if (!ad7766->trig)
return -ENOMEM;
ad7766->trig->ops = &ad7766_trigger_ops;
ad7766->trig->dev.parent = &spi->dev;
iio_trigger_set_drvdata(ad7766->trig, ad7766);
ret = devm_request_irq(&spi->dev, spi->irq, ad7766_irq,
IRQF_TRIGGER_FALLING, dev_name(&spi->dev),
ad7766->trig);
if (ret < 0)
return ret;
/*
* The device generates interrupts as long as it is powered up.
* Some platforms might not allow the option to power it down so
* disable the interrupt to avoid extra load on the system
*/
disable_irq(spi->irq);
ret = devm_iio_trigger_register(&spi->dev, ad7766->trig);
if (ret)
return ret;
}
spi_set_drvdata(spi, indio_dev);
ad7766->spi = spi;
/* First byte always 0 */
ad7766->xfer.rx_buf = &ad7766->data[1];
ad7766->xfer.len = 3;
spi_message_init(&ad7766->msg);
spi_message_add_tail(&ad7766->xfer, &ad7766->msg);
ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
&iio_pollfunc_store_time, &ad7766_trigger_handler,
&ad7766_buffer_setup_ops);
if (ret)
return ret;
ret = devm_iio_device_register(&spi->dev, indio_dev);
if (ret)
return ret;
return 0;
}
static const struct spi_device_id ad7766_id[] = {
{"ad7766", ID_AD7766},
{"ad7766-1", ID_AD7766_1},
{"ad7766-2", ID_AD7766_2},
{"ad7767", ID_AD7766},
{"ad7767-1", ID_AD7766_1},
{"ad7767-2", ID_AD7766_2},
{}
};
MODULE_DEVICE_TABLE(spi, ad7766_id);
static struct spi_driver ad7766_driver = {
.driver = {
.name = "ad7766",
},
.probe = ad7766_probe,
.id_table = ad7766_id,
};
module_spi_driver(ad7766_driver);
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
MODULE_DESCRIPTION("Analog Devices AD7766 and AD7767 ADCs driver support");
MODULE_LICENSE("GPL v2");