forked from Minki/linux
9e7a03233e
- Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki). - Fix and clean up the teo cpuidle governor (Rafael Wysocki). - Fix the cpuidle registration error code path (Zhenzhong Duan). - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei). - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano). - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar). - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen). - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef). * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard). * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller). * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla). * Fix for imx's default speed grade value (Anson Huang). * Minor cleanup of the s3c64xx driver (Nathan Chancellor). * CPU speed bin detection fix for sun50i (Ondrej Jirman). - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez). * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko). * Improve an error message in devfreq_add_device() (Matthias Kaehlcke). - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko). * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny). * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski). - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui). - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson). - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd). - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft). - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan). - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven). - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas). - Add pm-graph utility entry to MAINTAINERS (Todd Brandt). - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel). * Fix build warnings (Nathan Chancellor). * Improve mperf_monitor handling (Janakarajan Natarajan). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl3dHGYSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxMcgP/1bMSkxlRHFOXYSRwS4YcvkUjlBHrCSi 3qGRyYwhc+eRLqRc+2tcmQeQEeQRBqUt8etp7/9WxqS3nic/3Vdf6AFuhSpmJzo1 6JTEutHMU5eP8lwQuKoUCJncCNdIfEOkd5T35E12W/ar5PwyJio0UByZJBnJBjD/ p7/713ucq6ZH95OGncmCJ1S1UslFCZrSS2RRigDInu8gpEssnwN9zwaJbzUYrZHj BmnKpBpT8FdLmkpbOtmmiT7q2ZGpUEHhkaO916Knf/+BFdvydTXoR90FVvXKy8Zr QpOxaTdQB2ADifUa5zs8klVP6otmZhEO9vz8hVMUWGziqagObykQngzl8tqrKEBh hLI8eEG1IkEBCv5ThQbLcoaRXNpwriXXfvWPTPB8s84HJxNZ09F6pXsv1SLh96qC lj8Q5Yy2a3tlpsg4LB58XoJ54gOtlh8bWKkM0FytrFI/IP+HT4TUu/Rxgp1nDbGd tKzLvpn4Yo2h10seeDbYk3l79mogUYj50RmwjjPn+9RwS/Df4eIpNb6ibllGZUN/ zcPZH5xlVfQRl2LKDufVN0nYSnoMZY/fU05p9XbUiJWd80LHYOb4Em1N6h/FNOyl alDhVwlxEvc2BQwL/gjYmN6Qxc7SsPTBrSGVwjWYY+FghOYQd/wBDQqQUeM21QKg ChOE3z/F/26r =GJvT -----END PGP SIGNATURE----- Merge tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include cpuidle changes to use nanoseconds (instead of microseconds) as the unit of time and to simplify checks for disabled idle states in the idle loop, some cpuidle fixes and governor updates, assorted cpufreq updates (driver updates mostly and a few core fixes and cleanups), devfreq updates (dominated by the tegra30 driver changes), new CPU IDs for the RAPL power capping driver, relatively minor updates of the generic power domains (genpd) and operation performance points (OPP) frameworks, and assorted fixes and cleanups. There are also two maintainer information updates: Chanwoo Choi will be maintaining the devfreq subsystem going forward and Todd Brandt is going to maintain the pm-graph utility (created by him). Specifics: - Use nanoseconds (instead of microseconds) as the unit of time in the cpuidle core and simplify checks for disabled idle states in the idle loop (Rafael Wysocki) - Fix and clean up the teo cpuidle governor (Rafael Wysocki) - Fix the cpuidle registration error code path (Zhenzhong Duan) - Avoid excessive vmexits in the ACPI cpuidle driver (Yin Fengwei) - Extend the idle injection infrastructure to be able to measure the requested duration in nanoseconds and to allow an exit latency limit for idle states to be specified (Daniel Lezcano) - Fix cpufreq driver registration and clarify a comment in the cpufreq core (Viresh Kumar) - Add NULL checks to the show() and store() methods of sysfs attributes exposed by cpufreq (Kai Shen) - Update cpufreq drivers: * Fix for a plain int as pointer warning from sparse in intel_pstate (Jamal Shareef) * Fix for a hardcoded number of CPUs and stack bloat in the powernv driver (John Hubbard) * Updates to the ti-cpufreq driver and DT files to support new platforms and migrate bindings from opp-v1 to opp-v2 (Adam Ford, H. Nikolaus Schaller) * Merging of the arm_big_little and vexpress-spc drivers and related cleanup (Sudeep Holla) * Fix for imx's default speed grade value (Anson Huang) * Minor cleanup of the s3c64xx driver (Nathan Chancellor) * CPU speed bin detection fix for sun50i (Ondrej Jirman) - Appoint Chanwoo Choi as the new devfreq maintainer. - Update the devfreq core: * Check NULL governor in available_governors_show sysfs to prevent showing wrong governor information and fix a race condition between devfreq_update_status() and trans_stat_show() (Leonard Crestez) * Add new 'interrupt-driven' flag for devfreq governors to allow interrupt-driven governors to prevent the devfreq core from polling devices for status (Dmitry Osipenko) * Improve an error message in devfreq_add_device() (Matthias Kaehlcke) - Update devfreq drivers: * tegra30 driver fixes and cleanups (Dmitry Osipenko) * Removal of unused property from dt-binding documentation for the exynos-bus driver (Kamil Konieczny) * exynos-ppmu cleanup and DT bindings update (Lukasz Luba, Marek Szyprowski) - Add new CPU IDs for CometLake Mobile and Desktop to the Intel RAPL power capping driver (Zhang Rui) - Allow device initialization in the generic power domains (genpd) framework to be more straightforward and clean it up (Ulf Hansson) - Add support for adjusting OPP voltages at run time to the OPP framework (Stephen Boyd) - Avoid freeing memory that has never been allocated in the hibernation core (Andy Whitcroft) - Clean up function headers in a header file and coding style in the wakeup IRQs handling code (Ulf Hansson, Xiaofei Tan) - Clean up the SmartReflex adaptive voltage scaling (AVS) driver for ARM (Ben Dooks, Geert Uytterhoeven) - Wrap power management documentation to fit in 80 columns (Bjorn Helgaas) - Add pm-graph utility entry to MAINTAINERS (Todd Brandt) - Update the cpupower utility: * Fix the handling of set and info subcommands (Abhishek Goel) * Fix build warnings (Nathan Chancellor) * Improve mperf_monitor handling (Janakarajan Natarajan)" * tag 'pm-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits) PM: Wrap documentation to fit in 80 columns cpuidle: Pass exit latency limit to cpuidle_use_deepest_state() cpuidle: Allow idle injection to apply exit latency limit cpuidle: Introduce cpuidle_driver_state_disabled() for driver quirks cpuidle: teo: Avoid code duplication in conditionals cpufreq: Register drivers only after CPU devices have been registered cpuidle: teo: Avoid using "early hits" incorrectly cpuidle: teo: Exclude cpuidle overhead from computations PM / Domains: Convert to dev_to_genpd_safe() in genpd_syscore_switch() mmc: tmio: Avoid boilerplate code in ->runtime_suspend() PM / Domains: Implement the ->start() callback for genpd PM / Domains: Introduce dev_pm_domain_start() ARM: OMAP2+: SmartReflex: add omap_sr_pdata definition PM / wakeirq: remove unnecessary parentheses power: avs: smartreflex: Remove superfluous cast in debugfs_create_file() call cpuidle: Use nanoseconds as the unit of time PM / OPP: Support adjusting OPP voltages at runtime PM / core: Clean up some function headers in power.h cpufreq: Add NULL checks to show() and store() methods of cpufreq cpufreq: intel_pstate: Fix plain int as pointer warning from sparse ...
484 lines
11 KiB
C
484 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Generic entry points for the idle threads and
|
|
* implementation of the idle task scheduling class.
|
|
*
|
|
* (NOTE: these are not related to SCHED_IDLE batch scheduled
|
|
* tasks which are handled in sched/fair.c )
|
|
*/
|
|
#include "sched.h"
|
|
|
|
#include <trace/events/power.h>
|
|
|
|
/* Linker adds these: start and end of __cpuidle functions */
|
|
extern char __cpuidle_text_start[], __cpuidle_text_end[];
|
|
|
|
/**
|
|
* sched_idle_set_state - Record idle state for the current CPU.
|
|
* @idle_state: State to record.
|
|
*/
|
|
void sched_idle_set_state(struct cpuidle_state *idle_state)
|
|
{
|
|
idle_set_state(this_rq(), idle_state);
|
|
}
|
|
|
|
static int __read_mostly cpu_idle_force_poll;
|
|
|
|
void cpu_idle_poll_ctrl(bool enable)
|
|
{
|
|
if (enable) {
|
|
cpu_idle_force_poll++;
|
|
} else {
|
|
cpu_idle_force_poll--;
|
|
WARN_ON_ONCE(cpu_idle_force_poll < 0);
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_GENERIC_IDLE_POLL_SETUP
|
|
static int __init cpu_idle_poll_setup(char *__unused)
|
|
{
|
|
cpu_idle_force_poll = 1;
|
|
|
|
return 1;
|
|
}
|
|
__setup("nohlt", cpu_idle_poll_setup);
|
|
|
|
static int __init cpu_idle_nopoll_setup(char *__unused)
|
|
{
|
|
cpu_idle_force_poll = 0;
|
|
|
|
return 1;
|
|
}
|
|
__setup("hlt", cpu_idle_nopoll_setup);
|
|
#endif
|
|
|
|
static noinline int __cpuidle cpu_idle_poll(void)
|
|
{
|
|
rcu_idle_enter();
|
|
trace_cpu_idle_rcuidle(0, smp_processor_id());
|
|
local_irq_enable();
|
|
stop_critical_timings();
|
|
|
|
while (!tif_need_resched() &&
|
|
(cpu_idle_force_poll || tick_check_broadcast_expired()))
|
|
cpu_relax();
|
|
start_critical_timings();
|
|
trace_cpu_idle_rcuidle(PWR_EVENT_EXIT, smp_processor_id());
|
|
rcu_idle_exit();
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Weak implementations for optional arch specific functions */
|
|
void __weak arch_cpu_idle_prepare(void) { }
|
|
void __weak arch_cpu_idle_enter(void) { }
|
|
void __weak arch_cpu_idle_exit(void) { }
|
|
void __weak arch_cpu_idle_dead(void) { }
|
|
void __weak arch_cpu_idle(void)
|
|
{
|
|
cpu_idle_force_poll = 1;
|
|
local_irq_enable();
|
|
}
|
|
|
|
/**
|
|
* default_idle_call - Default CPU idle routine.
|
|
*
|
|
* To use when the cpuidle framework cannot be used.
|
|
*/
|
|
void __cpuidle default_idle_call(void)
|
|
{
|
|
if (current_clr_polling_and_test()) {
|
|
local_irq_enable();
|
|
} else {
|
|
stop_critical_timings();
|
|
arch_cpu_idle();
|
|
start_critical_timings();
|
|
}
|
|
}
|
|
|
|
static int call_cpuidle(struct cpuidle_driver *drv, struct cpuidle_device *dev,
|
|
int next_state)
|
|
{
|
|
/*
|
|
* The idle task must be scheduled, it is pointless to go to idle, just
|
|
* update no idle residency and return.
|
|
*/
|
|
if (current_clr_polling_and_test()) {
|
|
dev->last_residency_ns = 0;
|
|
local_irq_enable();
|
|
return -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Enter the idle state previously returned by the governor decision.
|
|
* This function will block until an interrupt occurs and will take
|
|
* care of re-enabling the local interrupts
|
|
*/
|
|
return cpuidle_enter(drv, dev, next_state);
|
|
}
|
|
|
|
/**
|
|
* cpuidle_idle_call - the main idle function
|
|
*
|
|
* NOTE: no locks or semaphores should be used here
|
|
*
|
|
* On archs that support TIF_POLLING_NRFLAG, is called with polling
|
|
* set, and it returns with polling set. If it ever stops polling, it
|
|
* must clear the polling bit.
|
|
*/
|
|
static void cpuidle_idle_call(void)
|
|
{
|
|
struct cpuidle_device *dev = cpuidle_get_device();
|
|
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
|
|
int next_state, entered_state;
|
|
|
|
/*
|
|
* Check if the idle task must be rescheduled. If it is the
|
|
* case, exit the function after re-enabling the local irq.
|
|
*/
|
|
if (need_resched()) {
|
|
local_irq_enable();
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The RCU framework needs to be told that we are entering an idle
|
|
* section, so no more rcu read side critical sections and one more
|
|
* step to the grace period
|
|
*/
|
|
|
|
if (cpuidle_not_available(drv, dev)) {
|
|
tick_nohz_idle_stop_tick();
|
|
rcu_idle_enter();
|
|
|
|
default_idle_call();
|
|
goto exit_idle;
|
|
}
|
|
|
|
/*
|
|
* Suspend-to-idle ("s2idle") is a system state in which all user space
|
|
* has been frozen, all I/O devices have been suspended and the only
|
|
* activity happens here and in iterrupts (if any). In that case bypass
|
|
* the cpuidle governor and go stratight for the deepest idle state
|
|
* available. Possibly also suspend the local tick and the entire
|
|
* timekeeping to prevent timer interrupts from kicking us out of idle
|
|
* until a proper wakeup interrupt happens.
|
|
*/
|
|
|
|
if (idle_should_enter_s2idle() || dev->forced_idle_latency_limit_ns) {
|
|
u64 max_latency_ns;
|
|
|
|
if (idle_should_enter_s2idle()) {
|
|
rcu_idle_enter();
|
|
|
|
entered_state = cpuidle_enter_s2idle(drv, dev);
|
|
if (entered_state > 0) {
|
|
local_irq_enable();
|
|
goto exit_idle;
|
|
}
|
|
|
|
rcu_idle_exit();
|
|
|
|
max_latency_ns = U64_MAX;
|
|
} else {
|
|
max_latency_ns = dev->forced_idle_latency_limit_ns;
|
|
}
|
|
|
|
tick_nohz_idle_stop_tick();
|
|
rcu_idle_enter();
|
|
|
|
next_state = cpuidle_find_deepest_state(drv, dev, max_latency_ns);
|
|
call_cpuidle(drv, dev, next_state);
|
|
} else {
|
|
bool stop_tick = true;
|
|
|
|
/*
|
|
* Ask the cpuidle framework to choose a convenient idle state.
|
|
*/
|
|
next_state = cpuidle_select(drv, dev, &stop_tick);
|
|
|
|
if (stop_tick || tick_nohz_tick_stopped())
|
|
tick_nohz_idle_stop_tick();
|
|
else
|
|
tick_nohz_idle_retain_tick();
|
|
|
|
rcu_idle_enter();
|
|
|
|
entered_state = call_cpuidle(drv, dev, next_state);
|
|
/*
|
|
* Give the governor an opportunity to reflect on the outcome
|
|
*/
|
|
cpuidle_reflect(dev, entered_state);
|
|
}
|
|
|
|
exit_idle:
|
|
__current_set_polling();
|
|
|
|
/*
|
|
* It is up to the idle functions to reenable local interrupts
|
|
*/
|
|
if (WARN_ON_ONCE(irqs_disabled()))
|
|
local_irq_enable();
|
|
|
|
rcu_idle_exit();
|
|
}
|
|
|
|
/*
|
|
* Generic idle loop implementation
|
|
*
|
|
* Called with polling cleared.
|
|
*/
|
|
static void do_idle(void)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
/*
|
|
* If the arch has a polling bit, we maintain an invariant:
|
|
*
|
|
* Our polling bit is clear if we're not scheduled (i.e. if rq->curr !=
|
|
* rq->idle). This means that, if rq->idle has the polling bit set,
|
|
* then setting need_resched is guaranteed to cause the CPU to
|
|
* reschedule.
|
|
*/
|
|
|
|
__current_set_polling();
|
|
tick_nohz_idle_enter();
|
|
|
|
while (!need_resched()) {
|
|
rmb();
|
|
|
|
local_irq_disable();
|
|
|
|
if (cpu_is_offline(cpu)) {
|
|
tick_nohz_idle_stop_tick();
|
|
cpuhp_report_idle_dead();
|
|
arch_cpu_idle_dead();
|
|
}
|
|
|
|
arch_cpu_idle_enter();
|
|
|
|
/*
|
|
* In poll mode we reenable interrupts and spin. Also if we
|
|
* detected in the wakeup from idle path that the tick
|
|
* broadcast device expired for us, we don't want to go deep
|
|
* idle as we know that the IPI is going to arrive right away.
|
|
*/
|
|
if (cpu_idle_force_poll || tick_check_broadcast_expired()) {
|
|
tick_nohz_idle_restart_tick();
|
|
cpu_idle_poll();
|
|
} else {
|
|
cpuidle_idle_call();
|
|
}
|
|
arch_cpu_idle_exit();
|
|
}
|
|
|
|
/*
|
|
* Since we fell out of the loop above, we know TIF_NEED_RESCHED must
|
|
* be set, propagate it into PREEMPT_NEED_RESCHED.
|
|
*
|
|
* This is required because for polling idle loops we will not have had
|
|
* an IPI to fold the state for us.
|
|
*/
|
|
preempt_set_need_resched();
|
|
tick_nohz_idle_exit();
|
|
__current_clr_polling();
|
|
|
|
/*
|
|
* We promise to call sched_ttwu_pending() and reschedule if
|
|
* need_resched() is set while polling is set. That means that clearing
|
|
* polling needs to be visible before doing these things.
|
|
*/
|
|
smp_mb__after_atomic();
|
|
|
|
sched_ttwu_pending();
|
|
schedule_idle();
|
|
|
|
if (unlikely(klp_patch_pending(current)))
|
|
klp_update_patch_state(current);
|
|
}
|
|
|
|
bool cpu_in_idle(unsigned long pc)
|
|
{
|
|
return pc >= (unsigned long)__cpuidle_text_start &&
|
|
pc < (unsigned long)__cpuidle_text_end;
|
|
}
|
|
|
|
struct idle_timer {
|
|
struct hrtimer timer;
|
|
int done;
|
|
};
|
|
|
|
static enum hrtimer_restart idle_inject_timer_fn(struct hrtimer *timer)
|
|
{
|
|
struct idle_timer *it = container_of(timer, struct idle_timer, timer);
|
|
|
|
WRITE_ONCE(it->done, 1);
|
|
set_tsk_need_resched(current);
|
|
|
|
return HRTIMER_NORESTART;
|
|
}
|
|
|
|
void play_idle_precise(u64 duration_ns, u64 latency_ns)
|
|
{
|
|
struct idle_timer it;
|
|
|
|
/*
|
|
* Only FIFO tasks can disable the tick since they don't need the forced
|
|
* preemption.
|
|
*/
|
|
WARN_ON_ONCE(current->policy != SCHED_FIFO);
|
|
WARN_ON_ONCE(current->nr_cpus_allowed != 1);
|
|
WARN_ON_ONCE(!(current->flags & PF_KTHREAD));
|
|
WARN_ON_ONCE(!(current->flags & PF_NO_SETAFFINITY));
|
|
WARN_ON_ONCE(!duration_ns);
|
|
|
|
rcu_sleep_check();
|
|
preempt_disable();
|
|
current->flags |= PF_IDLE;
|
|
cpuidle_use_deepest_state(latency_ns);
|
|
|
|
it.done = 0;
|
|
hrtimer_init_on_stack(&it.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
it.timer.function = idle_inject_timer_fn;
|
|
hrtimer_start(&it.timer, ns_to_ktime(duration_ns),
|
|
HRTIMER_MODE_REL_PINNED);
|
|
|
|
while (!READ_ONCE(it.done))
|
|
do_idle();
|
|
|
|
cpuidle_use_deepest_state(0);
|
|
current->flags &= ~PF_IDLE;
|
|
|
|
preempt_fold_need_resched();
|
|
preempt_enable();
|
|
}
|
|
EXPORT_SYMBOL_GPL(play_idle_precise);
|
|
|
|
void cpu_startup_entry(enum cpuhp_state state)
|
|
{
|
|
arch_cpu_idle_prepare();
|
|
cpuhp_online_idle(state);
|
|
while (1)
|
|
do_idle();
|
|
}
|
|
|
|
/*
|
|
* idle-task scheduling class.
|
|
*/
|
|
|
|
#ifdef CONFIG_SMP
|
|
static int
|
|
select_task_rq_idle(struct task_struct *p, int cpu, int sd_flag, int flags)
|
|
{
|
|
return task_cpu(p); /* IDLE tasks as never migrated */
|
|
}
|
|
|
|
static int
|
|
balance_idle(struct rq *rq, struct task_struct *prev, struct rq_flags *rf)
|
|
{
|
|
return WARN_ON_ONCE(1);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Idle tasks are unconditionally rescheduled:
|
|
*/
|
|
static void check_preempt_curr_idle(struct rq *rq, struct task_struct *p, int flags)
|
|
{
|
|
resched_curr(rq);
|
|
}
|
|
|
|
static void put_prev_task_idle(struct rq *rq, struct task_struct *prev)
|
|
{
|
|
}
|
|
|
|
static void set_next_task_idle(struct rq *rq, struct task_struct *next, bool first)
|
|
{
|
|
update_idle_core(rq);
|
|
schedstat_inc(rq->sched_goidle);
|
|
}
|
|
|
|
struct task_struct *pick_next_task_idle(struct rq *rq)
|
|
{
|
|
struct task_struct *next = rq->idle;
|
|
|
|
set_next_task_idle(rq, next, true);
|
|
|
|
return next;
|
|
}
|
|
|
|
/*
|
|
* It is not legal to sleep in the idle task - print a warning
|
|
* message if some code attempts to do it:
|
|
*/
|
|
static void
|
|
dequeue_task_idle(struct rq *rq, struct task_struct *p, int flags)
|
|
{
|
|
raw_spin_unlock_irq(&rq->lock);
|
|
printk(KERN_ERR "bad: scheduling from the idle thread!\n");
|
|
dump_stack();
|
|
raw_spin_lock_irq(&rq->lock);
|
|
}
|
|
|
|
/*
|
|
* scheduler tick hitting a task of our scheduling class.
|
|
*
|
|
* NOTE: This function can be called remotely by the tick offload that
|
|
* goes along full dynticks. Therefore no local assumption can be made
|
|
* and everything must be accessed through the @rq and @curr passed in
|
|
* parameters.
|
|
*/
|
|
static void task_tick_idle(struct rq *rq, struct task_struct *curr, int queued)
|
|
{
|
|
}
|
|
|
|
static void switched_to_idle(struct rq *rq, struct task_struct *p)
|
|
{
|
|
BUG();
|
|
}
|
|
|
|
static void
|
|
prio_changed_idle(struct rq *rq, struct task_struct *p, int oldprio)
|
|
{
|
|
BUG();
|
|
}
|
|
|
|
static unsigned int get_rr_interval_idle(struct rq *rq, struct task_struct *task)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void update_curr_idle(struct rq *rq)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* Simple, special scheduling class for the per-CPU idle tasks:
|
|
*/
|
|
const struct sched_class idle_sched_class = {
|
|
/* .next is NULL */
|
|
/* no enqueue/yield_task for idle tasks */
|
|
|
|
/* dequeue is not valid, we print a debug message there: */
|
|
.dequeue_task = dequeue_task_idle,
|
|
|
|
.check_preempt_curr = check_preempt_curr_idle,
|
|
|
|
.pick_next_task = pick_next_task_idle,
|
|
.put_prev_task = put_prev_task_idle,
|
|
.set_next_task = set_next_task_idle,
|
|
|
|
#ifdef CONFIG_SMP
|
|
.balance = balance_idle,
|
|
.select_task_rq = select_task_rq_idle,
|
|
.set_cpus_allowed = set_cpus_allowed_common,
|
|
#endif
|
|
|
|
.task_tick = task_tick_idle,
|
|
|
|
.get_rr_interval = get_rr_interval_idle,
|
|
|
|
.prio_changed = prio_changed_idle,
|
|
.switched_to = switched_to_idle,
|
|
.update_curr = update_curr_idle,
|
|
};
|