forked from Minki/linux
fd55599834
Now that both usb2 and usb3 phy drivers, and also the ST dwc3 glue code are all present upstream, we can add the dwc3 DT node and have a working usb3 controller on stih407-b2120 and stih410-b2020. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
548 lines
13 KiB
Plaintext
548 lines
13 KiB
Plaintext
/*
|
|
* Copyright (C) 2014 STMicroelectronics Limited.
|
|
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
#include "stih407-pinctrl.dtsi"
|
|
#include <dt-bindings/mfd/st-lpc.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/reset-controller/stih407-resets.h>
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
intc: interrupt-controller@08761000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x08761000 0x1000>, <0x08760100 0x100>;
|
|
};
|
|
|
|
scu@08760000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0x08760000 0x1000>;
|
|
};
|
|
|
|
timer@08760200 {
|
|
interrupt-parent = <&intc>;
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x08760200 0x100>;
|
|
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&arm_periph_clk>;
|
|
};
|
|
|
|
l2: cache-controller {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0x08762000 0x1000>;
|
|
arm,data-latency = <3 3 3>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
powerdown: powerdown-controller {
|
|
compatible = "st,stih407-powerdown";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
softreset: softreset-controller {
|
|
compatible = "st,stih407-softreset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
picophyreset: picophyreset-controller {
|
|
compatible = "st,stih407-picophyreset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
syscfg_sbc: sbc-syscfg@9620000 {
|
|
compatible = "st,stih407-sbc-syscfg", "syscon";
|
|
reg = <0x9620000 0x1000>;
|
|
};
|
|
|
|
syscfg_front: front-syscfg@9280000 {
|
|
compatible = "st,stih407-front-syscfg", "syscon";
|
|
reg = <0x9280000 0x1000>;
|
|
};
|
|
|
|
syscfg_rear: rear-syscfg@9290000 {
|
|
compatible = "st,stih407-rear-syscfg", "syscon";
|
|
reg = <0x9290000 0x1000>;
|
|
};
|
|
|
|
syscfg_flash: flash-syscfg@92a0000 {
|
|
compatible = "st,stih407-flash-syscfg", "syscon";
|
|
reg = <0x92a0000 0x1000>;
|
|
};
|
|
|
|
syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
|
|
compatible = "st,stih407-sbc-reg-syscfg", "syscon";
|
|
reg = <0x9600000 0x1000>;
|
|
};
|
|
|
|
syscfg_core: core-syscfg@92b0000 {
|
|
compatible = "st,stih407-core-syscfg", "syscon";
|
|
reg = <0x92b0000 0x1000>;
|
|
};
|
|
|
|
syscfg_lpm: lpm-syscfg@94b5100 {
|
|
compatible = "st,stih407-lpm-syscfg", "syscon";
|
|
reg = <0x94b5100 0x1000>;
|
|
};
|
|
|
|
serial@9830000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9830000 0x2c>;
|
|
interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial0>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9831000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9831000 0x2c>;
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial1>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9832000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9832000 0x2c>;
|
|
interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_serial2>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SBC_ASC0 - UART10 */
|
|
sbc_serial0: serial@9530000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9530000 0x2c>;
|
|
interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_serial0>;
|
|
clocks = <&clk_sysin>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serial@9531000 {
|
|
compatible = "st,asc";
|
|
reg = <0x9531000 0x2c>;
|
|
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sbc_serial1>;
|
|
clocks = <&clk_sysin>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9840000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0x9840000 0x110>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9841000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9841000 0x110>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9842000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9842000 0x110>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9843000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9843000 0x110>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9844000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9844000 0x110>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c4_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9845000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9845000 0x110>;
|
|
interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c5_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
/* SSCs on SBC */
|
|
i2c@9540000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9540000 0x110>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c10_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c@9541000 {
|
|
compatible = "st,comms-ssc4-i2c";
|
|
reg = <0x9541000 0x110>;
|
|
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c11_default>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usb2_picophy0: phy1 {
|
|
compatible = "st,stih407-usb2-phy";
|
|
#phy-cells = <0>;
|
|
st,syscfg = <&syscfg_core 0x100 0xf4>;
|
|
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
|
|
<&picophyreset STIH407_PICOPHY2_RESET>;
|
|
reset-names = "global", "port";
|
|
};
|
|
|
|
miphy28lp_phy: miphy28lp@9b22000 {
|
|
compatible = "st,miphy28lp-phy";
|
|
st,syscfg = <&syscfg_core>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
phy_port0: port@9b22000 {
|
|
reg = <0x9b22000 0xff>,
|
|
<0x9b09000 0xff>,
|
|
<0x9b04000 0xff>;
|
|
reg-names = "sata-up",
|
|
"pcie-up",
|
|
"pipew";
|
|
|
|
st,syscfg = <0x114 0x818 0xe0 0xec>;
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY0_SOFTRESET>;
|
|
};
|
|
|
|
phy_port1: port@9b2a000 {
|
|
reg = <0x9b2a000 0xff>,
|
|
<0x9b19000 0xff>,
|
|
<0x9b14000 0xff>;
|
|
reg-names = "sata-up",
|
|
"pcie-up",
|
|
"pipew";
|
|
|
|
st,syscfg = <0x118 0x81c 0xe4 0xf0>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY1_SOFTRESET>;
|
|
};
|
|
|
|
phy_port2: port@8f95000 {
|
|
reg = <0x8f95000 0xff>,
|
|
<0x8f90000 0xff>;
|
|
reg-names = "pipew",
|
|
"usb3-up";
|
|
|
|
st,syscfg = <0x11c 0x820>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
reset-names = "miphy-sw-rst";
|
|
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
|
|
};
|
|
};
|
|
|
|
spi@9840000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9840000 0x110>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
pinctrl-0 = <&pinctrl_spi0_default>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9841000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9841000 0x110>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9842000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9842000 0x110>;
|
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9843000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9843000 0x110>;
|
|
interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9844000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9844000 0x110>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
/* SBC SSC */
|
|
spi@9540000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9540000 0x110>;
|
|
interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9541000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9541000 0x110>;
|
|
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi@9542000 {
|
|
compatible = "st,comms-ssc4-spi";
|
|
reg = <0x9542000 0x110>;
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk_sysin>;
|
|
clock-names = "ssc";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc0: sdhci@09060000 {
|
|
compatible = "st,sdhci-stih407", "st,sdhci";
|
|
status = "disabled";
|
|
reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
|
|
reg-names = "mmc", "top-mmc-delay";
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
|
|
interrupt-names = "mmcirq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_mmc0>;
|
|
clock-names = "mmc";
|
|
clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
};
|
|
|
|
mmc1: sdhci@09080000 {
|
|
compatible = "st,sdhci-stih407", "st,sdhci";
|
|
status = "disabled";
|
|
reg = <0x09080000 0x7ff>;
|
|
reg-names = "mmc";
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
|
|
interrupt-names = "mmcirq";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sd1>;
|
|
clock-names = "mmc";
|
|
clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
|
|
resets = <&softreset STIH407_MMC1_SOFTRESET>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
/* Watchdog and Real-Time Clock */
|
|
lpc@8787000 {
|
|
compatible = "st,stih407-lpc";
|
|
reg = <0x8787000 0x1000>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
|
|
timeout-sec = <120>;
|
|
st,syscfg = <&syscfg_core>;
|
|
st,lpc-mode = <ST_LPC_MODE_WDT>;
|
|
};
|
|
|
|
lpc@8788000 {
|
|
compatible = "st,stih407-lpc";
|
|
reg = <0x8788000 0x1000>;
|
|
interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
|
|
st,lpc-mode = <ST_LPC_MODE_RTC>;
|
|
};
|
|
|
|
sata0: sata@9b20000 {
|
|
compatible = "st,ahci";
|
|
reg = <0x9b20000 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
|
|
interrupt-names = "hostc";
|
|
|
|
phys = <&phy_port0 PHY_TYPE_SATA>;
|
|
phy-names = "ahci_phy";
|
|
|
|
resets = <&powerdown STIH407_SATA0_POWERDOWN>,
|
|
<&softreset STIH407_SATA0_SOFTRESET>,
|
|
<&softreset STIH407_SATA0_PWR_SOFTRESET>;
|
|
reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
|
|
|
|
clock-names = "ahci_clk";
|
|
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
sata1: sata@9b28000 {
|
|
compatible = "st,ahci";
|
|
reg = <0x9b28000 0x1000>;
|
|
|
|
interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
|
|
interrupt-names = "hostc";
|
|
|
|
phys = <&phy_port1 PHY_TYPE_SATA>;
|
|
phy-names = "ahci_phy";
|
|
|
|
resets = <&powerdown STIH407_SATA1_POWERDOWN>,
|
|
<&softreset STIH407_SATA1_SOFTRESET>,
|
|
<&softreset STIH407_SATA1_PWR_SOFTRESET>;
|
|
reset-names = "pwr-dwn",
|
|
"sw-rst",
|
|
"pwr-rst";
|
|
|
|
clock-names = "ahci_clk";
|
|
clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
st_dwc3: dwc3@8f94000 {
|
|
compatible = "st,stih407-dwc3";
|
|
reg = <0x08f94000 0x1000>, <0x110 0x4>;
|
|
reg-names = "reg-glue", "syscfg-reg";
|
|
st,syscfg = <&syscfg_core>;
|
|
resets = <&powerdown STIH407_USB3_POWERDOWN>,
|
|
<&softreset STIH407_MIPHY2_SOFTRESET>;
|
|
reset-names = "powerdown", "softreset";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb3>;
|
|
ranges;
|
|
|
|
status = "disabled";
|
|
|
|
dwc3: dwc3@9900000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x09900000 0x100000>;
|
|
interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
|
|
dr_mode = "host";
|
|
phy-names = "usb2-phy", "usb3-phy";
|
|
phys = <&usb2_picophy0>,
|
|
<&phy_port2 PHY_TYPE_USB3>;
|
|
};
|
|
};
|
|
};
|
|
};
|