forked from Minki/linux
a99ab50dbb
The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4 + Slightly different output voltage/currents + 32kHz Output - ADC/Charger capabilities Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
40 lines
1.1 KiB
Plaintext
40 lines
1.1 KiB
Plaintext
* Ricoh RN5T567/RN5T618 PMIC
|
|
|
|
Ricoh RN5T567/RN5T618 is a power management IC family which integrates
|
|
3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
|
|
a watchdog timer. The RN5T618 provides additionally a Li-ion battery
|
|
charger, fuel gauge and an ADC. It can be controlled through an I2C
|
|
interface.
|
|
|
|
Required properties:
|
|
- compatible: must be one of
|
|
"ricoh,rn5t567"
|
|
"ricoh,rn5t618"
|
|
- reg: the I2C slave address of the device
|
|
|
|
Sub-nodes:
|
|
- regulators: the node is required if the regulator functionality is
|
|
needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
|
|
(RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
|
|
The common bindings for each individual regulator can be found in:
|
|
Documentation/devicetree/bindings/regulator/regulator.txt
|
|
|
|
Example:
|
|
|
|
pmic@32 {
|
|
compatible = "ricoh,rn5t618";
|
|
reg = <0x32>;
|
|
|
|
regulators {
|
|
DCDC1 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
DCDC2 {
|
|
regulator-min-microvolt = <1175000>;
|
|
regulator-max-microvolt = <1175000>;
|
|
};
|
|
};
|
|
};
|