forked from Minki/linux
f9911803e8
Call clk_prepare_enable() and clk_disable_unprepare() for cpu dai clock and codec dai clock in dai statup and shutdown callbacks. This to make sure the related clock are enabled when the audio device is used. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
161 lines
4.5 KiB
Plaintext
161 lines
4.5 KiB
Plaintext
Simple-Card:
|
|
|
|
Simple-Card specifies audio DAI connections of SoC <-> codec.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "simple-audio-card"
|
|
|
|
Optional properties:
|
|
|
|
- simple-audio-card,name : User specified audio sound card name, one string
|
|
property.
|
|
- simple-audio-card,widgets : Please refer to widgets.txt.
|
|
- simple-audio-card,routing : A list of the connections between audio components.
|
|
Each entry is a pair of strings, the first being the
|
|
connection's sink, the second being the connection's
|
|
source.
|
|
- simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec
|
|
mclk.
|
|
- simple-audio-card,hp-det-gpio : Reference to GPIO that signals when
|
|
headphones are attached.
|
|
- simple-audio-card,mic-det-gpio : Reference to GPIO that signals when
|
|
a microphone is attached.
|
|
|
|
Optional subnodes:
|
|
|
|
- simple-audio-card,dai-link : Container for dai-link level
|
|
properties and the CPU and CODEC
|
|
sub-nodes. This container may be
|
|
omitted when the card has only one
|
|
DAI link. See the examples and the
|
|
section bellow.
|
|
|
|
Dai-link subnode properties and subnodes:
|
|
|
|
If dai-link subnode is omitted and the subnode properties are directly
|
|
under "sound"-node the subnode property and subnode names have to be
|
|
prefixed with "simple-audio-card,"-prefix.
|
|
|
|
Required dai-link subnodes:
|
|
|
|
- cpu : CPU sub-node
|
|
- codec : CODEC sub-node
|
|
|
|
Optional dai-link subnode properties:
|
|
|
|
- format : CPU/CODEC common audio format.
|
|
"i2s", "right_j", "left_j" , "dsp_a"
|
|
"dsp_b", "ac97", "pdm", "msb", "lsb"
|
|
- frame-master : Indicates dai-link frame master.
|
|
phandle to a cpu or codec subnode.
|
|
- bitclock-master : Indicates dai-link bit clock master.
|
|
phandle to a cpu or codec subnode.
|
|
- bitclock-inversion : bool property. Add this if the
|
|
dai-link uses bit clock inversion.
|
|
- frame-inversion : bool property. Add this if the
|
|
dai-link uses frame clock inversion.
|
|
|
|
For backward compatibility the frame-master and bitclock-master
|
|
properties can be used as booleans in codec subnode to indicate if the
|
|
codec is the dai-link frame or bit clock master. In this case there
|
|
should be no dai-link node, the same properties should not be present
|
|
at sound-node level, and the bitclock-inversion and frame-inversion
|
|
properties should also be placed in the codec node if needed.
|
|
|
|
Required CPU/CODEC subnodes properties:
|
|
|
|
- sound-dai : phandle and port of CPU/CODEC
|
|
|
|
Optional CPU/CODEC subnodes properties:
|
|
|
|
- dai-tdm-slot-num : Please refer to tdm-slot.txt.
|
|
- dai-tdm-slot-width : Please refer to tdm-slot.txt.
|
|
- clocks / system-clock-frequency : specify subnode's clock if needed.
|
|
it can be specified via "clocks" if system has
|
|
clock node (= common clock), or "system-clock-frequency"
|
|
(if system doens't support common clock)
|
|
If a clock is specified, it is
|
|
enabled with clk_prepare_enable()
|
|
in dai startup() and disabled with
|
|
clk_disable_unprepare() in dai
|
|
shutdown().
|
|
|
|
Example 1 - single DAI link:
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "VF610-Tower-Sound-Card";
|
|
simple-audio-card,format = "left_j";
|
|
simple-audio-card,bitclock-master = <&dailink0_master>;
|
|
simple-audio-card,frame-master = <&dailink0_master>;
|
|
simple-audio-card,widgets =
|
|
"Microphone", "Microphone Jack",
|
|
"Headphone", "Headphone Jack",
|
|
"Speaker", "External Speaker";
|
|
simple-audio-card,routing =
|
|
"MIC_IN", "Microphone Jack",
|
|
"Headphone Jack", "HP_OUT",
|
|
"External Speaker", "LINE_OUT";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&sh_fsi2 0>;
|
|
};
|
|
|
|
dailink0_master: simple-audio-card,codec {
|
|
sound-dai = <&ak4648>;
|
|
clocks = <&osc>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
ak4648: ak4648@12 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "asahi-kasei,ak4648";
|
|
reg = <0x12>;
|
|
};
|
|
};
|
|
|
|
sh_fsi2: sh_fsi2@ec230000 {
|
|
#sound-dai-cells = <1>;
|
|
compatible = "renesas,sh_fsi2";
|
|
reg = <0xec230000 0x400>;
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <0 146 0x4>;
|
|
};
|
|
|
|
Example 2 - many DAI links:
|
|
|
|
sound {
|
|
compatible = "simple-audio-card";
|
|
simple-audio-card,name = "Cubox Audio";
|
|
|
|
simple-audio-card,dai-link@0 { /* I2S - HDMI */
|
|
format = "i2s";
|
|
cpu {
|
|
sound-dai = <&audio1 0>;
|
|
};
|
|
codec {
|
|
sound-dai = <&tda998x 0>;
|
|
};
|
|
};
|
|
|
|
simple-audio-card,dai-link@1 { /* S/PDIF - HDMI */
|
|
cpu {
|
|
sound-dai = <&audio1 1>;
|
|
};
|
|
codec {
|
|
sound-dai = <&tda998x 1>;
|
|
};
|
|
};
|
|
|
|
simple-audio-card,dai-link@2 { /* S/PDIF - S/PDIF */
|
|
cpu {
|
|
sound-dai = <&audio1 1>;
|
|
};
|
|
codec {
|
|
sound-dai = <&spdif_codec>;
|
|
};
|
|
};
|
|
};
|